Θα ήθελα για άλλη μιά φορά την βοήθεια σας.
Το ξέρω πως το θέμα είναι τετριμμένο αλλά πραγματικά δεν ξέρω τι να κάνω.
Έχω διαβάσει πολλά παρόμοια θέματα και άκρη δεν έχω βγάλει.
( Hardy 8.04 , Kernel 2.6.24-25 -generic, GNOME 2.22.3 )
Με τον προτζέκτορα αναμμένο και συνδεδεμένο με RGB σας δίνω τα αποτελέσματα των παρακάτω εντολών:
lspci -nn |grep VGA:
- Κώδικας: Επιλογή όλων
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1)
xrandr:
- Κώδικας: Επιλογή όλων
Screen 0: minimum 320 x 240, current 1440 x 900, maximum 1440 x 900
default connected 1440x900+0+0 0mm x 0mm
1440x900 50.0*
1280x800 51.0
1280x768 52.0
1024x768 53.0
840x525 54.0
800x600 55.0 56.0
800x512 57.0
720x450 58.0
640x512 59.0
640x480 60.0 61.0
640x400 62.0
640x384 63.0
512x384 64.0
400x300 65.0
320x240 66.0
xrandr --verbose
- Κώδικας: Επιλογή όλων
Screen 0: minimum 320 x 240, current 1440 x 900, maximum 1440 x 900
default connected 1440x900+0+0 (0x1ad) normal (normal) 0mm x 0mm
Identifier: 0x1ac
Timestamp: 32782
Subpixel: unknown
Clones:
CRTC: 0
CRTCs: 0
1440x900 (0x1ad) 64.8MHz
h: width 1440 start 0 end 0 total 1440 skew 0 clock 45.0KHz
v: height 900 start 0 end 0 total 900 clock 50.0Hz
1280x800 (0x1ae) 52.2MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 40.8KHz
v: height 800 start 0 end 0 total 800 clock 51.0Hz
1280x768 (0x1af) 51.1MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 39.9KHz
v: height 768 start 0 end 0 total 768 clock 52.0Hz
1024x768 (0x1b0) 41.7MHz
h: width 1024 start 0 end 0 total 1024 skew 0 clock 40.7KHz
v: height 768 start 0 end 0 total 768 clock 53.0Hz
840x525 (0x1b1) 23.8MHz
h: width 840 start 0 end 0 total 840 skew 0 clock 28.4KHz
v: height 525 start 0 end 0 total 525 clock 54.0Hz
800x600 (0x1b2) 26.4MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 33.0KHz
v: height 600 start 0 end 0 total 600 clock 55.0Hz
800x600 (0x1b3) 26.9MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 33.6KHz
v: height 600 start 0 end 0 total 600 clock 56.0Hz
800x512 (0x1b4) 23.3MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 29.2KHz
v: height 512 start 0 end 0 total 512 clock 57.0Hz
720x450 (0x1b5) 18.8MHz
h: width 720 start 0 end 0 total 720 skew 0 clock 26.1KHz
v: height 450 start 0 end 0 total 450 clock 58.0Hz
640x512 (0x1b6) 19.3MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 30.2KHz
v: height 512 start 0 end 0 total 512 clock 59.0Hz
640x480 (0x1b7) 18.4MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 28.8KHz
v: height 480 start 0 end 0 total 480 clock 60.0Hz
640x480 (0x1b8) 18.7MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 29.3KHz
v: height 480 start 0 end 0 total 480 clock 61.0Hz
640x400 (0x1b9) 15.9MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 24.8KHz
v: height 400 start 0 end 0 total 400 clock 62.0Hz
640x384 (0x1ba) 15.5MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 24.2KHz
v: height 384 start 0 end 0 total 384 clock 63.0Hz
512x384 (0x1bb) 12.6MHz
h: width 512 start 0 end 0 total 512 skew 0 clock 24.6KHz
v: height 384 start 0 end 0 total 384 clock 64.0Hz
400x300 (0x1bc) 7.8MHz
h: width 400 start 0 end 0 total 400 skew 0 clock 19.5KHz
v: height 300 start 0 end 0 total 300 clock 65.0Hz
320x240 (0x1bd) 5.1MHz
h: width 320 start 0 end 0 total 320 skew 0 clock 15.8KHz
v: height 240 start 0 end 0 total 240 clock 66.0Hz
...καθώς και το xorg.conf στο /etc/X11 :
- Κώδικας: Επιλογή όλων
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,gr"
Option "XkbVariant" ",extended"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
EndSection
Παρακαλώ τα φώτα σας ...
Τι να κάνω...;
Να δούμε και καμιά ταινία...
