έγραψε:Δες πρωτα απ'ολα εδω Launchpad bug: #709677 και εδω Launchpad bug: #636045
Δοκιμασε την απαντηση #7 στο πρωτο link και δες αν φτιαξει και σε εσενα.
Πληκτρολογησα sudo gedit /etc/default/grub στο τερματικο και διορθωσα σε αυτο : GRUB_CMDLINE_LINUX="enable_mtrr_cleanup mtrr_spare_reg_nr=1" οπως λεει .
Σωστα εκανα edit ;
έγραψε:Δες εδω Launchpad bug: #754799 για το προβλημα που υπαρχει τωρα.
Eδω τι εννοεις ;
Εγκατασταση νεοτερου πυρηνα δεν εκανα γιατι φοβαμαι μηπως τα χαλασω ολα .
Τωρα οταν δινω : lspci μου δινει :
- Κώδικας: Επιλογή όλων
john@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
06:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
john@ubuntu:~$
και οταν δινω :
dmesg μου δινει :
- Κώδικας: Επιλογή όλων
[ 1.113779] pnp 00:05: [io 0x0070-0x0077]
[ 1.113784] pnp 00:05: [irq 8]
[ 1.113814] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.130747] pnp 00:06: [io 0x0060]
[ 1.130752] pnp 00:06: [io 0x0064]
[ 1.130762] pnp 00:06: [irq 1]
[ 1.130815] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.130826] pnp 00:07: [irq 12]
[ 1.130861] pnp 00:07: Plug and Play ACPI device, IDs TOS0100 SYN0700 SYN0002 PNP0f13 (active)
[ 1.131158] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 1.131160] pnp 00:08: [mem 0xfed10000-0xfed13fff]
[ 1.131162] pnp 00:08: [mem 0xfed16000-0xfed16fff]
[ 1.131163] pnp 00:08: [mem 0xfed19000-0xfed19fff]
[ 1.131165] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 1.131167] pnp 00:08: [mem 0x00000000-0x00000fff]
[ 1.131168] pnp 00:08: [mem 0x7c000000-0x7c000fff]
[ 1.131170] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 1.131173] pnp 00:08: [mem 0xfed90000-0xfed8ffff disabled]
[ 1.131175] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
[ 1.131177] pnp 00:08: [mem 0xff000000-0xffffffff]
[ 1.131178] pnp 00:08: [mem 0xfee00000-0xfeefffff]
[ 1.131180] pnp 00:08: [mem 0x00000000-0x00000fff]
[ 1.131249] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.131252] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.131254] system 00:08: [mem 0xfed16000-0xfed16fff] has been reserved
[ 1.131256] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.131259] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.131261] system 00:08: [mem 0x00000000-0x00000fff] could not be reserved
[ 1.131263] system 00:08: [mem 0x7c000000-0x7c000fff] has been reserved
[ 1.131265] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.131268] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.131270] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.131272] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.131274] system 00:08: [mem 0x00000000-0x00000fff] could not be reserved
[ 1.131277] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.131510] pnp 00:09: [bus ff]
[ 1.131565] pnp 00:09: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.131574] pnp: PnP ACPI: found 10 devices
[ 1.131575] ACPI: ACPI bus type pnp unregistered
[ 1.131578] PnPBIOS: Disabled by ACPI PNP
[ 1.167589] pci 0000:00:1c.0: PCI bridge to [bus 01-05]
[ 1.167593] pci 0000:00:1c.0: bridge window [io 0x4000-0x5fff]
[ 1.167599] pci 0000:00:1c.0: bridge window [mem 0x91e00000-0x925fffff]
[ 1.167604] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x90cfffff 64bit pref]
[ 1.167612] pci 0000:00:1c.1: PCI bridge to [bus 06-0a]
[ 1.167615] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 1.167622] pci 0000:00:1c.1: bridge window [mem 0x91500000-0x91dfffff]
[ 1.167627] pci 0000:00:1c.1: bridge window [mem 0x90d00000-0x914fffff 64bit pref]
[ 1.167633] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
[ 1.167635] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.167640] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.167645] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.167666] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.167672] pci 0000:00:1c.0: setting latency timer to 64
[ 1.167682] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.167686] pci 0000:00:1c.1: setting latency timer to 64
[ 1.167694] pci 0000:00:1e.0: setting latency timer to 64
[ 1.167699] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.167701] pci_bus 0000:00: resource 5 [io 0x0d00-0xfdff]
[ 1.167703] pci_bus 0000:00: resource 6 [io 0xff28-0xff2b]
[ 1.167705] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 1.167707] pci_bus 0000:00: resource 8 [mem 0x77800000-0xfeafffff]
[ 1.167709] pci_bus 0000:01: resource 0 [io 0x4000-0x5fff]
[ 1.167711] pci_bus 0000:01: resource 1 [mem 0x91e00000-0x925fffff]
[ 1.167713] pci_bus 0000:01: resource 2 [mem 0x90400000-0x90cfffff 64bit pref]
[ 1.167715] pci_bus 0000:06: resource 0 [io 0x2000-0x3fff]
[ 1.167717] pci_bus 0000:06: resource 1 [mem 0x91500000-0x91dfffff]
[ 1.167719] pci_bus 0000:06: resource 2 [mem 0x90d00000-0x914fffff 64bit pref]
[ 1.167721] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
[ 1.167723] pci_bus 0000:0b: resource 5 [io 0x0d00-0xfdff]
[ 1.167725] pci_bus 0000:0b: resource 6 [io 0xff28-0xff2b]
[ 1.167726] pci_bus 0000:0b: resource 7 [mem 0x000a0000-0x000bffff]
[ 1.167728] pci_bus 0000:0b: resource 8 [mem 0x77800000-0xfeafffff]
[ 1.167758] NET: Registered protocol family 2
[ 1.167822] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.168028] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.168356] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.168507] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.168509] TCP reno registered
[ 1.168512] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.168518] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.168603] NET: Registered protocol family 1
[ 1.168615] pci 0000:00:02.0: Boot video device
[ 1.198658] PCI: CLS 0 bytes, default 64
[ 1.198965] cpufreq-nforce2: No nForce2 chipset.
[ 1.199145] audit: initializing netlink socket (disabled)
[ 1.199154] type=2000 audit(1311661958.744:1): initialized
[ 1.207463] highmem bounce pool size: 64 pages
[ 1.207470] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.209015] VFS: Disk quotas dquot_6.5.2
[ 1.209066] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.209630] fuse init (API version 7.16)
[ 1.209710] msgmni has been set to 1705
[ 1.209936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.209965] io scheduler noop registered
[ 1.209967] io scheduler deadline registered
[ 1.209980] io scheduler cfq registered (default)
[ 1.210209] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.210233] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.210279] intel_idle: MWAIT substates: 0x1120
[ 1.210281] intel_idle: v0.4 model 0x25
[ 1.210282] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.617969] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.029260] ACPI: AC Adapter [ACAD] (on-line)
[ 2.029358] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 2.029411] ACPI: Lid Switch [LID0]
[ 2.029454] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.029458] ACPI: Power Button [PWRB]
[ 2.029495] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.029497] ACPI: Power Button [PWRF]
[ 2.029710] ACPI: acpi_idle yielding to intel_idle
[ 2.050219] ERST: Table is not found!
[ 2.050278] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.050319] isapnp: Scanning for PnP cards...
[ 2.069108] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.069116] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.196871] Refined TSC clocksource calibration: 2393.999 MHz.
[ 2.196876] Switching to clocksource tsc
[ 2.497130] isapnp: No Plug & Play device found
[ 2.501798] Linux agpgart interface v0.103
[ 2.501886] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 2.501962] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.502711] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 2.502847] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 2.503946] brd: module loaded
[ 2.504513] loop: module loaded
[ 2.504603] i2c-core: driver [adp5520] using legacy suspend method
[ 2.504604] i2c-core: driver [adp5520] using legacy resume method
[ 2.505032] Fixed MDIO Bus: probed
[ 2.505069] PPP generic driver version 2.4.2
[ 2.505104] tun: Universal TUN/TAP device driver, 1.6
[ 2.505105] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.505175] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.505195] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.505210] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.505215] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.505245] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.505297] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.509180] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.509200] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x92608000
[ 2.524307] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.524461] hub 1-0:1.0: USB hub found
[ 2.524465] hub 1-0:1.0: 2 ports detected
[ 2.524530] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.524541] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.524544] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.524581] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.524625] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.528525] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.528540] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x92607000
[ 2.544271] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.544412] hub 2-0:1.0: USB hub found
[ 2.544415] hub 2-0:1.0: 2 ports detected
[ 2.544469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.544482] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.544550] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.560845] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.560850] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.560964] mousedev: PS/2 mouse device common for all mice
[ 2.561997] rtc_cmos 00:05: RTC can wake from S4
[ 2.562049] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.562081] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.562150] device-mapper: uevent: version 1.0.3
[ 2.562218] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 2.562265] device-mapper: multipath: version 1.2.0 loaded
[ 2.562268] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.562326] EISA: Probing bus 0 at eisa.0
[ 2.562328] EISA: Cannot allocate resource for mainboard
[ 2.562331] Cannot allocate resource for EISA slot 1
[ 2.562332] Cannot allocate resource for EISA slot 2
[ 2.562334] Cannot allocate resource for EISA slot 3
[ 2.562336] Cannot allocate resource for EISA slot 4
[ 2.562338] Cannot allocate resource for EISA slot 5
[ 2.562339] Cannot allocate resource for EISA slot 6
[ 2.562341] Cannot allocate resource for EISA slot 7
[ 2.562343] Cannot allocate resource for EISA slot 8
[ 2.562344] EISA: Detected 0 cards.
[ 2.562499] cpuidle: using governor ladder
[ 2.562685] cpuidle: using governor menu
[ 2.562897] TCP cubic registered
[ 2.563004] NET: Registered protocol family 10
[ 2.563472] NET: Registered protocol family 17
[ 2.563486] Registering the dns_resolver key type
[ 2.564703] Using IPI No-Shortcut mode
[ 2.564782] PM: Hibernation image not present or could not be loaded.
[ 2.564791] registered taskstats version 1
[ 2.565165] Magic number: 3:73:520
[ 2.565288] rtc_cmos 00:05: setting system clock to 2011-07-26 06:32:40 UTC (1311661960)
[ 2.565291] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.565292] EDD information not available.
[ 2.565448] Freeing unused kernel memory: 700k freed
[ 2.565656] Write protecting the kernel text: 5192k
[ 2.565735] Write protecting the kernel read-only data: 2148k
[ 2.575164] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.588752] <30>udev[73]: starting version 167
[ 2.835837] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.968307] hub 1-1:1.0: USB hub found
[ 2.968526] hub 1-1:1.0: 6 ports detected
[ 3.079479] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.211894] hub 2-1:1.0: USB hub found
[ 3.212108] hub 2-1:1.0: 8 ports detected
[ 3.283241] usb 1-1.3: new high speed USB device using ehci_hcd and address 3
[ 3.462934] usb 1-1.4: new high speed USB device using ehci_hcd and address 4
[ 3.658521] usb 2-1.1: new full speed USB device using ehci_hcd and address 3
[ 3.674535] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.674570] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.674621] r8169 0000:01:00.0: setting latency timer to 64
[ 3.674628] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
[ 3.674693] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 3.675298] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8032000, 88:ae:1d:f2:10:d0, XID 00900000 IRQ 40
[ 3.686695] ahci 0000:00:1f.2: version 3.0
[ 3.686720] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.686770] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 3.686814] ahci: SSS flag set, parallel bus scan disabled
[ 3.686854] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
[ 3.686857] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.686862] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.703019] scsi0 : ahci
[ 3.703172] scsi1 : ahci
[ 3.703268] scsi2 : ahci
[ 3.703346] scsi3 : ahci
[ 3.703519] scsi4 : ahci
[ 3.704166] scsi5 : ahci
[ 3.704533] ata1: DUMMY
[ 3.704537] ata2: SATA max UDMA/133 abar m2048@0x92608800 port 0x92608980 irq 41
[ 3.704539] ata3: DUMMY
[ 3.704541] ata4: DUMMY
[ 3.704544] ata5: SATA max UDMA/133 abar m2048@0x92608800 port 0x92608b00 irq 41
[ 3.704548] ata6: SATA max UDMA/133 abar m2048@0x92608800 port 0x92608b80 irq 41
[ 3.708133] usbcore: registered new interface driver uas
[ 3.807878] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
[ 3.807976] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[ 3.810841] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input5
[ 3.811041] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[ 3.811060] usbcore: registered new interface driver usbhid
[ 3.811063] usbhid: USB HID core driver
[ 4.021806] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.022980] ata2.00: ATA-8: Hitachi HTS545032B9A300, PB3OC64G, max UDMA/133
[ 4.022985] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.024400] ata2.00: configured for UDMA/133
[ 4.024656] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[ 4.024823] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.024860] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.024936] sd 1:0:0:0: [sda] Write Protect is off
[ 4.024940] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.024971] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.074567] sda: sda1 sda2 < sda5 >
[ 4.074966] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.341254] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.343944] ata5.00: ATAPI: HL-DT-STDVDRAM GT30N, TN08, max UDMA/100
[ 4.346910] ata5.00: configured for UDMA/100
[ 4.349988] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N TN08 PQ: 0 ANSI: 5
[ 4.354270] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.354275] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.354427] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.354508] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.672680] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.677356] Initializing USB Mass Storage driver...
[ 4.677748] scsi6 : usb-storage 1-1.3:1.0
[ 4.678007] usbcore: registered new interface driver usb-storage
[ 4.678012] USB Mass Storage support registered.
[ 5.678143] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 5.678961] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5.684563] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5.764313] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 17.369945] <30>udev[295]: starting version 167
[ 17.447050] lp: driver loaded but no devices found
[ 17.449492] coretemp coretemp.0: TjMax is 90 C.
[ 17.449583] coretemp coretemp.2: TjMax is 90 C.
[ 17.512266] Adding 1951740k swap on /dev/sda5. Priority:-1 extents:1 across:1951740k
[ 18.214036] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 18.404825] type=1400 audit(1311661976.359:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=445 comm="apparmor_parser"
[ 18.405453] type=1400 audit(1311661976.363:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=445 comm="apparmor_parser"
[ 18.405844] type=1400 audit(1311661976.363:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=445 comm="apparmor_parser"
[ 18.537650] r8169 0000:01:00.0: eth0: link down
[ 18.537657] r8169 0000:01:00.0: eth0: link down
[ 18.537834] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.644251] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 18.644279] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 18.644423] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 18.653630] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 18.673043] [drm] Initialized drm 1.1.0 20060810
[ 18.710035] Linux video capture interface: v2.00
[ 18.728896] cfg80211: Calling CRDA to update world regulatory domain
[ 18.732638] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6)
[ 18.750277] input: CNF9055 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[ 18.750468] usbcore: registered new interface driver uvcvideo
[ 18.750471] USB Video Class driver (v1.0.0)
[ 18.815067] rtl8192ce 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.815079] rtl8192ce 0000:06:00.0: setting latency timer to 64
[ 18.827062] type=1400 audit(1311661976.783:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=686 comm="apparmor_parser"
[ 18.827913] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827917] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827920] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827923] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827924] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827927] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827930] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827933] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827935] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827939] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827941] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827944] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827945] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827948] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827950] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827953] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827955] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827958] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827960] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827963] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827965] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827969] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827971] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827973] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827976] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 18.827979] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.827981] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 18.828001] cfg80211: Pending regulatory request, waiting for it to be processed...
[ 18.828491] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.839174] type=1400 audit(1311661976.795:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=687 comm="apparmor_parser"
[ 18.839806] type=1400 audit(1311661976.795:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=685 comm="apparmor_parser"
[ 18.843483] type=1400 audit(1311661976.799:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=699 comm="apparmor_parser"
[ 18.844850] type=1400 audit(1311661976.803:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=699 comm="apparmor_parser"
[ 18.848865] type=1400 audit(1311661976.807:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=686 comm="apparmor_parser"
[ 18.849348] type=1400 audit(1311661976.807:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=686 comm="apparmor_parser"
[ 18.872304] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 18.872358] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.872364] cfg80211: World regulatory domain updated:
[ 18.872367] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.872370] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.872372] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.872375] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.872378] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.872381] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.872394] cfg80211: Calling CRDA for country: EC
[ 18.879769] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.879775] i915 0000:00:02.0: setting latency timer to 64
[ 18.891293] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891298] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891301] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891304] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891307] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891310] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891312] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891315] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891317] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891320] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891323] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891326] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891329] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891332] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891335] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891338] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891340] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891343] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891346] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891349] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891352] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891355] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891357] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891360] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891363] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 18.891366] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 18.891368] cfg80211: Disabling freq 2484 MHz
[ 18.891372] cfg80211: Regulatory domain changed to country: EC
[ 18.891374] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.891377] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.891380] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
[ 18.891383] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
[ 18.891385] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
[ 18.908449] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 18.908457] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 18.908459] [drm] Driver supports precise vblank timestamp query.
[ 19.051963] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.111518] fbcon: inteldrmfb (fb0) is primary device
[ 19.111636] Console: switching to colour frame buffer device 170x48
[ 19.111668] fb0: inteldrmfb frame buffer device
[ 19.111670] drm: registered panic notifier
[ 19.125085] acpi device:0e: registered as cooling_device4
[ 19.125556] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input7
[ 19.125615] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.125944] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 19.126448] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 19.126521] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 19.126559] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 19.173871] hda_codec: ALC259: BIOS auto-probing.
[ 19.179091] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 19.179184] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 19.282807] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.807556] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 19.807563] synaptics: Toshiba Satellite C660 detected, limiting rate to 40pps.
[ 19.885511] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 20.159904] r8169 0000:01:00.0: eth0: link up
[ 20.160054] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.494743] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 20.867147] ppdev: user-space parallel port driver
[ 22.849503] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 23.844221] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 23.866179] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 31.087087] eth0: no IPv6 routers present
john@ubuntu:~$
και για : sensors δινει :
- Κώδικας: Επιλογή όλων
john@ubuntu:~$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +42.0°C (high = +80.0°C, crit = +90.0°C)
coretemp-isa-0002
Adapter: ISA adapter
Core 2: +41.0°C (high = +80.0°C, crit = +90.0°C)
john@ubuntu:~$
Πως παει το συστημα τωρα ;
Πριν απο δυο post τα αποτελεσματα μου δεν ηταν πραγματικα γιατι δεν ειχα κανει edit στον grub .
Επισης οι θερμοκρασιες αυτες ειναι με τον υπολογιστη αναμμενο 5 ωρες .
Θα δουμε φως ;
Επισης απο εκει που εκανε 1,15 να ανοιξει τωρα κανει 25 δευτερολεπτα συν οτι απο την αρχη που εκανα την εγκατασταση δουλευει κανονικα το unity .
