Επίσης έχει ένα led που απ ότι θυμάμαι άναβε όταν ήταν ενεργή, τώρα δεν ανάβει. Ξέρει κανείς πως θα το κάνουμε να δουλέψει;
Δίνοντας lsusb δίνει αυτό
Spoiler: show
- Κώδικας: Επιλογή όλων
Bus 002 Device 002: ID eb1a:2800 eMPIA Technology, Inc. Terratec Cinergy 200
Bus 002 Device 003: ID 0408:030c Quanta Computer, Inc. HP Webcam
Bus 004 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 007 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
και το dmesg αυτό
Spoiler: show
- Κώδικας: Επιλογή όλων
[ 0.192059] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.192065] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.192073] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
[ 0.192078] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
[ 0.192085] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.192091] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.192100] pci 0000:08:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 0.192103] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[ 0.192107] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.192114] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.192120] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc02fffff pref]
[ 0.192129] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
[ 0.192136] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
[ 0.192197] pci 0000:00:1e.0: setting latency timer to 64
[ 0.192202] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.192204] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.192207] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.192210] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.192212] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.192215] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.192217] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.192220] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.192223] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.192226] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.192228] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.192231] pci_bus 0000:02: resource 0 [io 0x4000-0x7fff]
[ 0.192234] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.192237] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.192240] pci_bus 0000:04: resource 0 [io 0x8000-0xbfff]
[ 0.192242] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.192245] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.192248] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.192250] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
[ 0.192253] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc02fffff pref]
[ 0.192256] pci_bus 0000:09: resource 1 [mem 0xf8100000-0xf81fffff]
[ 0.192258] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.192261] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.192264] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.192266] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.192269] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.192271] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.192274] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.192277] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.192324] NET: Registered protocol family 2
[ 0.192393] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.192562] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.193074] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.193305] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.193307] TCP: reno registered
[ 0.193310] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.193324] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.193394] NET: Registered protocol family 1
[ 0.193660] pci 0000:01:00.0: Boot video device
[ 0.193720] PCI: CLS 64 bytes, default 64
[ 0.193790] Simple Boot Flag at 0x35 set to 0x1
[ 0.194158] audit: initializing netlink socket (disabled)
[ 0.194168] type=2000 audit(1366146346.188:1): initialized
[ 0.216864] highmem bounce pool size: 64 pages
[ 0.216881] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.218896] VFS: Disk quotas dquot_6.5.2
[ 0.218951] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.219520] fuse init (API version 7.19)
[ 0.219609] msgmni has been set to 1671
[ 0.219947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.219976] io scheduler noop registered
[ 0.219979] io scheduler deadline registered (default)
[ 0.219986] io scheduler cfq registered
[ 0.220174] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.220284] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.220423] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.220559] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.220668] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.220686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.220761] intel_idle: does not run on family 6 model 23
[ 0.221478] ACPI: AC Adapter [ACAD] (on-line)
[ 0.221552] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.221558] ACPI: Power Button [PWRB]
[ 0.221599] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.221603] ACPI: Sleep Button [SLPB]
[ 0.221652] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.221948] ACPI: Lid Switch [LID]
[ 0.222005] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.222009] ACPI: Power Button [PWRF]
[ 0.222089] ACPI: Requesting acpi_cpufreq
[ 0.391842] Freeing initrd memory: 14788k freed
[ 0.401820] Monitor-Mwait will be used to enter C-1 state
[ 0.401829] Monitor-Mwait will be used to enter C-2 state
[ 0.401833] Monitor-Mwait will be used to enter C-3 state
[ 0.401837] Marking TSC unstable due to TSC halts in idle
[ 0.401850] ACPI: acpi_idle registered with cpuidle
[ 0.406604] [Firmware Bug]: Invalid critical threshold (0)
[ 0.407364] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.407367] ACPI: Thermal Zone [THR1] (68 C)
[ 0.407386] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.407422] GHES: HEST is not enabled!
[ 0.407476] isapnp: Scanning for PnP cards...
[ 0.407556] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.408950] Linux agpgart interface v0.103
[ 0.410686] brd: module loaded
[ 0.411448] loop: module loaded
[ 0.411570] ata_piix 0000:00:1f.1: version 2.13
[ 0.411625] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.411940] scsi0 : ata_piix
[ 0.412022] scsi1 : ata_piix
[ 0.412409] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.412412] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.412739] Fixed MDIO Bus: probed
[ 0.412789] tun: Universal TUN/TAP device driver, 1.6
[ 0.412791] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.412831] PPP generic driver version 2.4.2
[ 0.412873] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.412907] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.412911] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.412918] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.412950] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.413011] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.416825] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.416843] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
[ 0.428019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.428055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.428058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.428060] usb usb1: Product: EHCI Host Controller
[ 0.428063] usb usb1: Manufacturer: Linux 3.5.0-27-generic ehci_hcd
[ 0.428065] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.428185] hub 1-0:1.0: USB hub found
[ 0.428190] hub 1-0:1.0: 4 ports detected
[ 0.428278] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.428282] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.428289] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.428317] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.432207] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.432223] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
[ 0.444019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.444051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.444054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444057] usb usb2: Product: EHCI Host Controller
[ 0.444059] usb usb2: Manufacturer: Linux 3.5.0-27-generic ehci_hcd
[ 0.444062] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.444176] hub 2-0:1.0: USB hub found
[ 0.444181] hub 2-0:1.0: 6 ports detected
[ 0.444264] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.444284] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.444306] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.444310] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.444315] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.444353] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.444388] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.444391] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444394] usb usb3: Product: UHCI Host Controller
[ 0.444396] usb usb3: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.444398] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.444505] hub 3-0:1.0: USB hub found
[ 0.444510] hub 3-0:1.0: 2 ports detected
[ 0.444593] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.444597] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.444602] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.444639] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.444672] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.444675] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444678] usb usb4: Product: UHCI Host Controller
[ 0.444680] usb usb4: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.444683] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.444771] hub 4-0:1.0: USB hub found
[ 0.444775] hub 4-0:1.0: 2 ports detected
[ 0.444855] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.444859] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.444864] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.444892] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.444925] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.444928] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444930] usb usb5: Product: UHCI Host Controller
[ 0.444933] usb usb5: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.444935] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.445024] hub 5-0:1.0: USB hub found
[ 0.445028] hub 5-0:1.0: 2 ports detected
[ 0.445104] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.445109] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.445114] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.445150] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.445184] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.445186] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.445189] usb usb6: Product: UHCI Host Controller
[ 0.445191] usb usb6: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.445194] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.445282] hub 6-0:1.0: USB hub found
[ 0.445287] hub 6-0:1.0: 2 ports detected
[ 0.445363] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.445367] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.445372] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.445400] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.445432] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.445434] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.445437] usb usb7: Product: UHCI Host Controller
[ 0.445439] usb usb7: Manufacturer: Linux 3.5.0-27-generic uhci_hcd
[ 0.445442] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.445532] hub 7-0:1.0: USB hub found
[ 0.445536] hub 7-0:1.0: 2 ports detected
[ 0.445659] usbcore: registered new interface driver libusual
[ 0.445709] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.480968] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.480974] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.481078] mousedev: PS/2 mouse device common for all mice
[ 0.483910] rtc_cmos 00:08: RTC can wake from S4
[ 0.484072] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.484104] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.484158] device-mapper: uevent: version 1.0.3
[ 0.484224] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.484258] EISA: Probing bus 0 at eisa.0
[ 0.484260] EISA: Cannot allocate resource for mainboard
[ 0.484262] Cannot allocate resource for EISA slot 1
[ 0.484264] Cannot allocate resource for EISA slot 2
[ 0.484265] Cannot allocate resource for EISA slot 3
[ 0.484267] Cannot allocate resource for EISA slot 4
[ 0.484269] Cannot allocate resource for EISA slot 5
[ 0.484270] Cannot allocate resource for EISA slot 6
[ 0.484272] Cannot allocate resource for EISA slot 7
[ 0.484274] Cannot allocate resource for EISA slot 8
[ 0.484275] EISA: Detected 0 cards.
[ 0.484327] cpuidle: using governor ladder
[ 0.484387] cpuidle: using governor menu
[ 0.484389] EFI Variables Facility v0.08 2004-May-17
[ 0.484556] ashmem: initialized
[ 0.484693] TCP: cubic registered
[ 0.484805] NET: Registered protocol family 10
[ 0.485005] NET: Registered protocol family 17
[ 0.485017] Key type dns_resolver registered
[ 0.485088] Using IPI No-Shortcut mode
[ 0.485171] PM: Hibernation image not present or could not be loaded.
[ 0.485186] registered taskstats version 1
[ 0.487676] Key type trusted registered
[ 0.489786] Key type encrypted registered
[ 0.492424] Magic number: 9:929:95
[ 0.492518] rtc_cmos 00:08: setting system clock to 2013-04-16 21:05:47 UTC (1366146347)
[ 0.492984] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.492986] EDD information not available.
[ 0.512429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.583697] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
[ 0.596250] ata1.00: configured for MWDMA2
[ 0.761694] isapnp: No Plug & Play device found
[ 0.765356] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5
[ 0.770504] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.770509] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.770696] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.770817] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.771015] Freeing unused kernel memory: 756k freed
[ 0.771387] Write protecting the kernel text: 5960k
[ 0.771448] Write protecting the kernel read-only data: 2412k
[ 0.771449] NX-protecting the kernel data: 4280k
[ 0.788779] udevd[94]: starting version 175
[ 0.846146] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.846305] r8169 0000:08:00.0: irq 44 for MSI/MSI-X
[ 0.846510] r8169 0000:08:00.0: eth0: RTL8101e at 0xf8424000, 00:1e:68:75:a7:5a, XID 94200000 IRQ 44
[ 0.881713] sdhci: Secure Digital Host Controller Interface driver
[ 0.881717] sdhci: Copyright(c) Pierre Ossman
[ 0.881997] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 0.883031] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.883044] mmc0: no vmmc regulator found
[ 0.884047] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.886352] Registered led device: mmc0::
[ 0.892614] ahci 0000:00:1f.2: version 3.0
[ 0.892688] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.892768] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.892771] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.892777] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.893479] scsi2 : ahci
[ 0.893598] scsi3 : ahci
[ 0.893685] scsi4 : ahci
[ 0.893836] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 45
[ 0.893840] ata4: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 45
[ 0.893844] ata5: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 45
[ 0.916133] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
[ 0.925155] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 0.946385] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.980167] firewire_ohci 0000:09:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.006364] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.056415] usb 2-1: New USB device found, idVendor=eb1a, idProduct=2800
[ 1.056418] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.066545] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.126340] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.168249] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 1.212077] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.212106] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.212139] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.212695] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.212778] ata3.00: ATA-8: TOSHIBA MK2546GSX, LB014C, max UDMA/100
[ 1.212784] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.213434] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.213520] ata3.00: configured for UDMA/100
[ 1.213772] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5
[ 1.213965] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.213968] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.214045] sd 2:0:0:0: [sda] Write Protect is off
[ 1.214049] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.214076] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.318796] usb 2-4: New USB device found, idVendor=0408, idProduct=030c
[ 1.318802] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.318807] usb 2-4: Product: HP Webcam
[ 1.318811] usb 2-4: Manufacturer: QCM
[ 1.318816] usb 2-4: SerialNumber: SN0001
[ 1.321358] sda: sda1 sda2 < sda5 >
[ 1.321635] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.480215] firewire_core 0000:09:09.0: created device fw0: GUID 00241b000abefc00, S400
[ 1.672038] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 1.733737] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.733741] EXT4-fs (sda1): write access will be enabled during recovery
[ 1.846694] usb 4-2: New USB device found, idVendor=093a, idProduct=2510
[ 1.846700] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.846706] usb 4-2: Product: USB Optical Mouse
[ 1.846710] usb 4-2: Manufacturer: PixArt
[ 1.865766] usbcore: registered new interface driver usbhid
[ 1.865769] usbhid: USB HID core driver
[ 1.868838] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input5
[ 1.869039] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.1-2/input0
[ 2.088047] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 2.269465] usb 7-2: New USB device found, idVendor=03f0, idProduct=171d
[ 2.269471] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.269476] usb 7-2: Product: HP Integrated Module
[ 2.269481] usb 7-2: Manufacturer: Broadcom Corp
[ 4.529007] EXT4-fs (sda1): recovery complete
[ 4.537077] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.219097] Adding 3142652k swap on /dev/sda5. Priority:-1 extents:1 across:3142652k
[ 20.225235] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.324881] udevd[350]: starting version 175
[ 20.406818] lib80211: common routines for IEEE802.11 drivers
[ 20.406823] lib80211_crypt: registered algorithm 'NULL'
[ 20.407183] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 20.407190] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.407192] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 20.407196] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 20.407202] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.407209] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 20.407215] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.407217] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 20.408772] lp: driver loaded but no devices found
[ 20.412425] wl: module license 'MIXED/Proprietary' taints kernel.
[ 20.412429] Disabling lock debugging due to kernel taint
[ 20.510585] Bluetooth: Core ver 2.16
[ 20.519676] NET: Registered protocol family 31
[ 20.519683] Bluetooth: HCI device and connection manager initialized
[ 20.519687] Bluetooth: HCI socket layer initialized
[ 20.519689] Bluetooth: L2CAP socket layer initialized
[ 20.519702] Bluetooth: SCO socket layer initialized
[ 20.571048] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 20.572164] usbcore: registered new interface driver btusb
[ 20.584495] lib80211_crypt: registered algorithm 'TKIP'
[ 20.697793] Linux video capture interface: v2.00
[ 20.745384] acpi device:04: registered as cooling_device2
[ 20.745420] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.745514] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 20.746023] uvcvideo: Found UVC 1.00 device HP Webcam (0408:030c)
[ 20.753961] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
[ 20.754097] usbcore: registered new interface driver uvcvideo
[ 20.754100] USB Video Class driver (1.1.1)
[ 20.789127] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[ 20.789612] r592: driver successfully loaded
[ 20.792511] r852: Non dma capable device detected, dma disabled
[ 20.792524] r852: driver loaded successfully
[ 20.808379] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 20.835209] type=1400 audit(1366146367.836:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=649 comm="apparmor_parser"
[ 20.835673] type=1400 audit(1366146367.836:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=649 comm="apparmor_parser"
[ 20.835929] type=1400 audit(1366146367.836:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=649 comm="apparmor_parser"
[ 20.873118] wmi: Mapper loaded
[ 20.996173] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 20.996181] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 20.996199] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.000606] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.88 Wed Mar 27 14:31:12 PDT 2013
[ 21.013119] Bluetooth: RFCOMM TTY layer initialized
[ 21.013126] Bluetooth: RFCOMM socket layer initialized
[ 21.013128] Bluetooth: RFCOMM ver 1.11
[ 21.018105] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.018109] Bluetooth: BNEP filters: protocol multicast
[ 21.056179] ppdev: user-space parallel port driver
[ 21.090705] init: failsafe main process (805) killed by TERM signal
[ 21.128492] type=1400 audit(1366146368.132:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=873 comm="apparmor_parser"
[ 21.129062] type=1400 audit(1366146368.132:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=873 comm="apparmor_parser"
[ 21.227655] type=1400 audit(1366146368.228:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=928 comm="apparmor_parser"
[ 21.228236] type=1400 audit(1366146368.232:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=928 comm="apparmor_parser"
[ 21.231805] type=1400 audit(1366146368.232:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=929 comm="apparmor_parser"
[ 21.232384] type=1400 audit(1366146368.236:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=929 comm="apparmor_parser"
[ 21.238853] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 21.242152] type=1400 audit(1366146368.244:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=933 comm="apparmor_parser"
[ 21.260740] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 21.326284] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 21.326497] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 21.341130] r8169 0000:08:00.0: eth0: link down
[ 21.343100] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 21.343358] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.343860] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.358847] em28xx: New device @ 480 Mbps (eb1a:2800, interface 0, class 0)
[ 21.358852] em28xx: Video interface 0 found
[ 21.362558] em28xx #0: chip ID is em2800
[ 21.367174] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 21.377759] kvm: disabled by bios
[ 21.456522] em28xx #0: board has no eeprom
[ 21.483221] kvm: disabled by bios
[ 21.885100] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
[ 21.995065] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 22.384301] em28xx #0: found i2c device @ 0x4a [saa7113h]
[ 24.544285] em28xx #0: Your board has no unique USB ID.
[ 24.544355] em28xx #0: A hint were successfully done, based on i2c devicelist hash.
[ 24.544420] em28xx #0: This method is not 100% failproof.
[ 24.544483] em28xx #0: If the board were missdetected, please email this log to:
[ 24.544548] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org>
[ 24.544613] em28xx #0: Board detected as EM2860/SAA711X Reference Design
[ 24.624465] em28xx #0: Identified as EM2860/SAA711X Reference Design (card=19)
[ 24.648423] em28xx #0: Config register raw data: 0x61
[ 24.648428] em28xx #0: I2S Audio (3 sample rates)
[ 24.648431] em28xx #0: No AC97 audio processor
[ 24.700047] em28xx #0: v4l2 driver version 0.1.3
[ 25.160268] em28xx #0: V4L2 video device registered as video1
[ 25.160364] usbcore: registered new interface driver em28xx
[ 25.377583] init: udev-fallback-graphics main process (1274) terminated with status 1
[ 25.415680] init: plymouth-splash main process (1293) terminated with status 1
[ 693.088543] CE: hpet increased min_delta_ns to 20113 nsec
[ 699.098577] CE: hpet increased min_delta_ns to 30169 nsec
