κάρτα τηλεόρασης Gigabyte tiger και Ubuntu 8.10

[aantonis]

Παιδιά γνωρίζει κανένας πως μπορώ να κάνω την συγκεκριμένη pci κάρτα να δουλέψει στο Ubuntu 8.10;
Ευχαριστώ εκ των προτέρων.

[logari81]

δοκιμασες τα προγραμμτα tvtime, xawtv; Αν δοκίμασες και δεν παιζει δωσε μας το αποτελεσμα της εντολής

Κώδικας: Επιλογή όλων

lspci -nn

να δουμε τι καρτα ειναι
και το αποτελεσμα του

Κώδικας: Επιλογή όλων

dmesg

για πιθανα σφαλματα.

[logari81]

Το αποτέλεσμα της εντολής lspci -nn είναι

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: Intel Corporation 82946GZ/PL/GL Memory Controller Hub [8086:2970] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation 82946GZ/PL/GL PCI Express Root Port [8086:2971] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV630 [Radeon HD 2600 Series] [1002:9589]
01:00.1 Audio device [0403]: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series] [1002:aa08]
02:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)

και το αποτέλεσμα της dmesg είναι

Κώδικας: Επιλογή όλων

[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4823.12 BogoMIPS (lpj=9646252)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017651] ACPI: Core revision 20080609
[ 0.018951] ACPI: Checking initramfs for custom DSDT
[ 0.296193] ENABLING IO-APIC IRQs
[ 0.296360] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.339423] CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
[ 0.340021] Booting processor 1/3 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4823.15 BogoMIPS (lpj=9646319)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.424570] CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
[ 0.424581] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.428112] Booting processor 2/1 ip 6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 4823.20 BogoMIPS (lpj=9646413)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.516544] CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
[ 0.516571] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.520150] Booting processor 3/2 ip 6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 4823.12 BogoMIPS (lpj=9646253)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.608553] CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
[ 0.608568] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.612039] Brought up 4 CPUs
[ 0.612042] Total of 4 processors activated (19292.61 BogoMIPS).
[ 0.612067] CPU0 attaching sched-domain:
[ 0.612070] domain 0: span 0,2 level MC
[ 0.612072] groups: 0 2
[ 0.612076] domain 1: span 0-3 level CPU
[ 0.612087] groups: 0,2 1,3
[ 0.612092] CPU1 attaching sched-domain:
[ 0.612094] domain 0: span 1,3 level MC
[ 0.612096] groups: 1 3
[ 0.612099] domain 1: span 0-3 level CPU
[ 0.612101] groups: 1,3 0,2
[ 0.612105] CPU2 attaching sched-domain:
[ 0.612107] domain 0: span 0,2 level MC
[ 0.612108] groups: 2 0
[ 0.612111] domain 1: span 0-3 level CPU
[ 0.612113] groups: 0,2 1,3
[ 0.612117] CPU3 attaching sched-domain:
[ 0.612119] domain 0: span 1,3 level MC
[ 0.612121] groups: 3 1
[ 0.612124] domain 1: span 0-3 level CPU
[ 0.612126] groups: 1,3 0,2
[ 0.612234] net_namespace: 840 bytes
[ 0.612234] Booting paravirtualized kernel on bare hardware
[ 0.612281] Time: 20:36:26 Date: 03/05/09
[ 0.612304] NET: Registered protocol family 16
[ 0.612332] EISA bus registered
[ 0.612332] ACPI: bus type pci registered
[ 0.612332] PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255
[ 0.612332] PCI: MCFG area at d0000000 reserved in E820
[ 0.612332] PCI: Using MMCONFIG for extended config space
[ 0.612332] PCI: Using configuration type 1 for base access
[ 0.616219] ACPI: EC: Look up EC in DSDT
[ 0.621186] ACPI: Interpreter enabled
[ 0.621199] ACPI: (supports S0 S3 S4 S5)
[ 0.621212] ACPI: Using IOAPIC for interrupt routing
[ 0.624844] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.624844] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.624844] pci 0000:00:01.0: PME# disabled
[ 0.624844] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4000000, f4003fff]
[ 0.624844] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.624844] pci 0000:00:1b.0: PME# disabled
[ 0.624844] PCI: 0000:00:1d.0 reg 20 io port: [bc00, bc1f]
[ 0.624844] PCI: 0000:00:1d.1 reg 20 io port: [b000, b01f]
[ 0.624844] PCI: 0000:00:1d.2 reg 20 io port: [b400, b41f]
[ 0.624844] PCI: 0000:00:1d.3 reg 20 io port: [b800, b81f]
[ 0.624844] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f4004000, f40043ff]
[ 0.624844] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.624844] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.624844] PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
[ 0.624844] PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
[ 0.624844] PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
[ 0.624844] PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
[ 0.624844] PCI: 0000:00:1f.2 reg 20 io port: [f000, f00f]
[ 0.624844] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.624844] pci 0000:00:1f.2: PME# disabled
[ 0.624844] PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
[ 0.624844] PCI: 0000:01:00.0 reg 10 64bit mmio: [e0000000, efffffff]
[ 0.624844] PCI: 0000:01:00.0 reg 18 64bit mmio: [f1000000, f100ffff]
[ 0.624844] PCI: 0000:01:00.0 reg 20 io port: [9000, 90ff]
[ 0.624844] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.624844] pci 0000:01:00.0: supports D1
[ 0.624844] pci 0000:01:00.0: supports D2
[ 0.624844] PCI: 0000:01:00.1 reg 10 64bit mmio: [f1010000, f1013fff]
[ 0.624844] pci 0000:01:00.1: supports D1
[ 0.624844] pci 0000:01:00.1: supports D2
[ 0.624844] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[ 0.624844] PCI: bridge 0000:00:01.0 32bit mmio: [f0000000, f1ffffff]
[ 0.624844] PCI: bridge 0000:00:01.0 64bit mmio pref: [e0000000, efffffff]
[ 0.624848] PCI: 0000:02:01.0 reg 10 32bit mmio: [f3001000, f30017ff]
[ 0.624888] pci 0000:02:01.0: supports D1
[ 0.624889] pci 0000:02:01.0: supports D2
[ 0.624918] PCI: 0000:02:05.0 reg 10 io port: [a000, a0ff]
[ 0.624924] PCI: 0000:02:05.0 reg 14 32bit mmio: [f3000000, f30000ff]
[ 0.628049] PCI: 0000:02:05.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.628062] pci 0000:02:05.0: supports D1
[ 0.628063] pci 0000:02:05.0: supports D2
[ 0.628065] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.628069] pci 0000:02:05.0: PME# disabled
[ 0.628100] pci 0000:00:1e.0: transparent bridge
[ 0.628103] PCI: bridge 0000:00:1e.0 io port: [a000, afff]
[ 0.628107] PCI: bridge 0000:00:1e.0 32bit mmio: [f2000000, f3ffffff]
[ 0.628119] bus 00 -> node 0
[ 0.628124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.628332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.636752] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.636752] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.636752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.636752] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.636752] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.636752] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.636752] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.636834] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.636895] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.636895] pnp: PnP ACPI init
[ 0.636895] ACPI: bus type pnp registered
[ 0.640438] pnp: PnP ACPI: found 14 devices
[ 0.640438] ACPI: ACPI bus type pnp unregistered
[ 0.640438] PnPBIOS: Disabled by ACPI PNP
[ 0.640438] PCI: Using ACPI for IRQ routing
[ 0.648040] NET: Registered protocol family 8
[ 0.648044] NET: Registered protocol family 20
[ 0.648066] NetLabel: Initializing
[ 0.648066] NetLabel: domain hash size = 128
[ 0.648066] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.648066] NetLabel: unlabeled traffic allowed by default
[ 0.648066] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.648067] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.649888] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.649891] actual entries 65620
[ 0.649955] AppArmor: AppArmor Filesystem Enabled
[ 0.649972] ACPI: RTC can wake from S4
[ 0.652042] Switched to high resolution mode on CPU 0
[ 0.652611] Switched to high resolution mode on CPU 2
[ 0.653197] Switched to high resolution mode on CPU 3
[ 0.653859] Switched to high resolution mode on CPU 1
[ 0.660062] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.660066] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.660069] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.660073] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.660076] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.660092] system 00:0a: ioport range 0x400-0x4bf could not be reserved
[ 0.660099] system 00:0b: iomem range 0xd0000000-0xdfffffff could not be reserved
[ 0.660107] system 00:0c: iomem range 0xcec00-0xcffff has been reserved
[ 0.660111] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.660114] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.660118] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.660122] system 00:0c: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 0.660126] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.660129] system 00:0c: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.660133] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.660137] system 00:0c: iomem range 0xfed13000-0xfed1dfff could not be reserved
[ 0.660141] system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 0.660145] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.660149] system 00:0c: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 0.660152] system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.660156] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.695649] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.695652] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.695656] pci 0000:00:01.0: MEM window: 0xf0000000-0xf1ffffff
[ 0.695659] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.695663] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.695666] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.695670] pci 0000:00:1e.0: MEM window: 0xf2000000-0xf3ffffff
[ 0.695674] pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x000000500fffff
[ 0.695684] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.695688] pci 0000:00:01.0: setting latency timer to 64
[ 0.695694] pci 0000:00:1e.0: setting latency timer to 64
[ 0.695697] bus: 00 index 0 io port: [0, ffff]
[ 0.695698] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.695700] bus: 01 index 0 io port: [9000, 9fff]
[ 0.695702] bus: 01 index 1 mmio: [f0000000, f1ffffff]
[ 0.695704] bus: 01 index 2 mmio: [e0000000, efffffff]
[ 0.695706] bus: 01 index 3 mmio: [0, 0]
[ 0.695707] bus: 02 index 0 io port: [a000, afff]
[ 0.695709] bus: 02 index 1 mmio: [f2000000, f3ffffff]
[ 0.695711] bus: 02 index 2 mmio: [50000000, 500fffff]
[ 0.695712] bus: 02 index 3 io port: [0, ffff]
[ 0.695714] bus: 02 index 4 mmio: [0, ffffffff]
[ 0.695721] NET: Registered protocol family 2
[ 0.708102] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.708353] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.708638] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.708787] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.708790] TCP reno registered
[ 0.712104] NET: Registered protocol family 1
[ 0.712226] checking if image is initramfs... it is
[ 1.277798] Freeing initrd memory: 8002k freed
[ 1.279530] audit: initializing netlink socket (disabled)
[ 1.279545] type=2000 audit(1236285386.277:1): initialized
[ 1.284561] highmem bounce pool size: 64 pages
[ 1.284568] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.286995] VFS: Disk quotas dquot_6.5.1
[ 1.287067] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.287151] msgmni has been set to 1761
[ 1.287254] io scheduler noop registered
[ 1.287256] io scheduler anticipatory registered
[ 1.287258] io scheduler deadline registered
[ 1.287268] io scheduler cfq registered (default)
[ 1.287361] pci 0000:01:00.0: Boot video device
[ 1.287459] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.287488] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.287512] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.287550] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.287823] isapnp: Scanning for PnP cards...
[ 1.640823] isapnp: No Plug & Play device found
[ 1.686317] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.686454] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.686641] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.687383] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.687723] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.689539] brd: module loaded
[ 1.689594] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.689694] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.689697] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.689806] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.693683] mice: PS/2 mouse device common for all mice
[ 1.693845] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.693866] rtc0: alarms up to one month, hpet irqs
[ 1.694043] EISA: Probing bus 0 at eisa.0
[ 1.694074] EISA: Detected 0 cards.
[ 1.694078] cpuidle: using governor ladder
[ 1.694081] cpuidle: using governor menu
[ 1.694624] TCP cubic registered
[ 1.694645] Using IPI No-Shortcut mode
[ 1.694872] registered taskstats version 1
[ 1.694987] Magic number: 1:60:649
[ 1.695008] tty ptyde: hash matches
[ 1.695064] rtc_cmos 00:03: setting system clock to 2009-03-05 20:36:27 UTC (1236285387)
[ 1.695068] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.695070] EDD information not available.
[ 1.695262] Freeing unused kernel memory: 424k freed
[ 1.695307] Write protecting the kernel text: 2580k
[ 1.695332] Write protecting the kernel read-only data: 940k
[ 1.712272] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.808646] fuse init (API version 7.9)
[ 1.829729] processor ACPI0007:00: registered as cooling_device0
[ 1.829734] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 1.829913] ACPI: SSDT 3FFF7A00, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 1.830155] processor ACPI0007:01: registered as cooling_device1
[ 1.830161] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 1.830321] ACPI: SSDT 3FFF7A90, 0087 (r1 PmRef Cpu2Ist 3000 INTL 20040311)
[ 1.830574] processor ACPI0007:02: registered as cooling_device2
[ 1.830579] ACPI: Processor [CPU2] (supports 2 throttling states)
[ 1.830737] ACPI: SSDT 3FFF7B20, 0087 (r1 PmRef Cpu3Ist 3000 INTL 20040311)
[ 1.830969] processor ACPI0007:03: registered as cooling_device3
[ 1.830974] ACPI: Processor [CPU3] (supports 2 throttling states)
[ 2.002199] usbcore: registered new interface driver usbfs
[ 2.002221] usbcore: registered new interface driver hub
[ 2.002264] usbcore: registered new device driver usb
[ 2.004102] No dock devices found.
[ 2.006477] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.006504] r8169 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.006787] eth0: RTL8169sc/8110sc at 0xf8860000, 00:1a:4d:96:3c:78, XID 18000000 IRQ 21
[ 2.008366] USB Universal Host Controller Interface driver v3.0
[ 2.008425] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.008436] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.008440] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.008484] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.008519] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[ 2.008720] usb usb1: configuration #1 chosen from 1 choice
[ 2.008743] hub 1-0:1.0: USB hub found
[ 2.008751] hub 1-0:1.0: 2 ports detected
[ 2.020718] SCSI subsystem initialized
[ 2.022968] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.037233] libata version 3.00 loaded.
[ 2.112349] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.112359] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.112362] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.112389] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.112419] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[ 2.112588] usb usb2: configuration #1 chosen from 1 choice
[ 2.112611] hub 2-0:1.0: USB hub found
[ 2.112617] hub 2-0:1.0: 2 ports detected
[ 2.212209] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.212217] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.212220] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.212244] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.212272] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[ 2.212344] usb usb3: configuration #1 chosen from 1 choice
[ 2.212365] hub 3-0:1.0: USB hub found
[ 2.212371] hub 3-0:1.0: 2 ports detected
[ 2.420277] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.420286] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.420291] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.420332] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.420360] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[ 2.420434] usb usb4: configuration #1 chosen from 1 choice
[ 2.420458] hub 4-0:1.0: USB hub found
[ 2.420463] hub 4-0:1.0: 2 ports detected
[ 2.532031] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 2.628271] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.628314] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.628317] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.628341] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.632256] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.632261] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4004000
[ 2.660092] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.660178] usb usb5: configuration #1 chosen from 1 choice
[ 2.660215] hub 5-0:1.0: USB hub found
[ 2.660223] hub 5-0:1.0: 8 ports detected
[ 2.868901] ata_piix 0000:00:1f.2: version 2.12
[ 2.868921] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.868925] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.868965] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.869079] scsi0 : ata_piix
[ 2.869209] scsi1 : ata_piix
[ 2.869861] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 2.869864] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 3.048192] ata1.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[ 3.048199] ata1.00: ATA-7: WDC WD3200AAJS-55RYA0, 12.01B01, max UDMA/133
[ 3.048203] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.056021] usb 3-1: device not accepting address 2, error -71
[ 3.064648] ata1.00: configured for UDMA/133
[ 3.112066] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 3.220148] ata2.01: NODEV after polling detection
[ 3.228204] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 3.228207] ata2.00: applying bridge limits
[ 3.244231] ata2.00: configured for UDMA/33
[ 3.244336] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJS-5 12.0 PQ: 0 ANSI: 5
[ 3.245340] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 3.257109] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.257140] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.268532] Driver 'sd' needs updating - please use bus_type methods
[ 3.268609] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 3.268622] sd 0:0:0:0: [sda] Write Protect is off
[ 3.268625] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.268647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.268706] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 3.268719] sd 0:0:0:0: [sda] Write Protect is off
[ 3.268721] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.268743] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.268746] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 3.277585] sda1 sda2 sda3 sda4
[ 3.300763] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.307559] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.307562] Uniform CD-ROM driver Revision: 3.20
[ 3.307619] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.726638] PM: Starting manual resume from disk
[ 3.726641] PM: Resume from partition 8:2
[ 3.726643] PM: Checking hibernation image.
[ 3.726824] PM: Resume from disk failed.
[ 3.756316] kjournald starting. Commit interval 5 seconds
[ 3.756329] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.888017] usb 5-8: new high speed USB device using ehci_hcd and address 5
[ 4.055077] usb 5-8: configuration #1 chosen from 1 choice
[ 4.296034] usb 3-1: new low speed USB device using uhci_hcd and address 4
[ 4.474426] usb 3-1: configuration #1 chosen from 1 choice
[ 4.716034] usb 3-2: new full speed USB device using uhci_hcd and address 5
[ 4.927439] usb 3-2: configuration #1 chosen from 1 choice
[ 5.168032] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 5.367501] usb 4-1: configuration #1 chosen from 1 choice
[ 8.508785] udevd version 124 started
[ 8.908795] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 8.926684] iTCO_vendor_support: vendor-support=0
[ 8.936028] ACPI: Power Button (FF) [PWRF]
[ 8.936107] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.968009] ACPI: Power Button (CM) [PWRB]
[ 8.978888] Linux agpgart interface v0.103
[ 9.089273] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.092557] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.113677] Bluetooth: Core ver 2.13
[ 9.113887] NET: Registered protocol family 31
[ 9.113889] Bluetooth: HCI device and connection manager initialized
[ 9.113892] Bluetooth: HCI socket layer initialized
[ 9.208058] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.222771] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 9.236887] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 9.237086] usbcore: registered new interface driver btusb
[ 9.243075] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 9.243114] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.253104] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3
[ 9.262449] usblp1: USB Bidirectional printer dev 5 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3
[ 9.266532] usblp2: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5511
[ 9.266556] usbcore: registered new interface driver usblp
[ 9.271541] usbcore: registered new interface driver hiddev
[ 9.294677] input: Microsoft Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input5
[ 9.328035] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 9.346383] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-1
[ 9.346411] usbcore: registered new interface driver usbhid
[ 9.346415] usbhid: v2.6:USB HID core driver
[ 9.349936] [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes.
[ 9.350264] [fglrx] vendor: 1002 device: 9589 count: 1
[ 9.350861] [fglrx] ioport: bar 4, base 0x9000, size: 0x100
[ 9.350879] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.350886] pci 0000:01:00.0: setting latency timer to 64
[ 9.353132] [fglrx] PAT is enabled successfully!
[ 9.354496] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
[ 9.379459] intel_rng: FWH not detected
[ 9.391674] parport_pc 00:08: reported by Plug and Play ACPI
[ 9.391717] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.401063] Linux video capture interface: v2.00
[ 9.536696] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 9.536750] saa7134 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 9.536756] saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xf3001000
[ 9.536763] saa7133[0]: subsystem: 1458:9002, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 9.536773] saa7133[0]: board init: gpio is c000000
[ 9.684530] saa7133[0]: i2c eeprom 00: 58 14 02 90 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 9.684540] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 9.684549] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 c1 ff ff ff ff
[ 9.684558] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684567] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 50 ff ff ff ff ff ff
[ 9.684576] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684584] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684593] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684602] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684611] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684619] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684628] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684637] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684646] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684654] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.684663] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.685035] saa7133[0]: registered device video0 [v4l2]
[ 9.685066] saa7133[0]: registered device vbi0
[ 9.819077] saa7134 ALSA driver for DMA sound loaded
[ 9.819358] saa7133[0]/alsa: saa7133[0] at 0xf3001000 irq 19 registered as card -2
[ 9.876810] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.876828] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.942391] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.942411] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 10.508454] lp0: using parport0 (interrupt-driven).
[ 10.584346] Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k
[ 11.119988] EXT3 FS on sda3, internal journal
[ 11.879275] kjournald starting. Commit interval 5 seconds
[ 11.879562] EXT3 FS on sda4, internal journal
[ 11.879569] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.145038] type=1505 audit(1236278197.726:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4418
[ 12.277382] type=1505 audit(1236278197.857:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4423
[ 12.277551] type=1505 audit(1236278197.857:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4423
[ 12.401645] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.838428] ACPI: WMI: Mapper loaded
[ 13.553461] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 13.607182] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 13.607187] apm: disabled - APM is not SMP safe.
[ 13.823678] ppdev: user-space parallel port driver
[ 15.245716] usblp0: nonzero read bulk status received: -71
[ 15.269211] usblp1: nonzero read bulk status received: -71
[ 15.822666] Bluetooth: L2CAP ver 2.11
[ 15.822672] Bluetooth: L2CAP socket layer initialized
[ 15.831346] Bluetooth: RFCOMM socket layer initialized
[ 15.831850] Bluetooth: RFCOMM TTY layer initialized
[ 15.831856] Bluetooth: RFCOMM ver 1.10
[ 15.896535] Bluetooth: SCO (Voice Link) ver 0.6
[ 15.896543] Bluetooth: SCO socket layer initialized
[ 15.928405] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.928412] Bluetooth: BNEP filters: protocol multicast
[ 16.056829] Bridge firewalling registered
[ 19.168393] [fglrx] CMM init INV FB MC:0xd0000000, length:0x10000000
[ 19.168401] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.168404] [fglrx] Reserved FB block: Unshared offset:ff77000, size:88000
[ 19.957905] r8169: eth0: link up
[ 20.120135] NET: Registered protocol family 17
[ 21.789704] NET: Registered protocol family 10
[ 21.790892] lo: Disabled Privacy Extensions
[ 32.332010] eth0: no IPv6 routers present
[ 120.835778] ppdev0: registered pardevice
[ 120.884170] ppdev0: unregistered pardevice
[ 120.980198] ppdev0: registered pardevice
[ 121.028185] ppdev0: unregistered pardevice
[ 122.128073] usblp0: nonzero read bulk status received: -71
[ 122.134942] usblp1: nonzero read bulk status received: -71
[ 123.164188] ppdev0: registered pardevice
[ 123.212016] ppdev0: unregistered pardevice
[ 1244.814610] cdrom: This disc doesn't have any tracks I recognize!
[ 1244.848285] end_request: I/O error, dev sr0, sector 0
[ 1244.848293] Buffer I/O error on device sr0, logical block 0
[ 1244.850460] end_request: I/O error, dev sr0, sector 0
[ 1244.850466] Buffer I/O error on device sr0, logical block 0
[69776.539683] [fglrx] CMM init INV FB MC:0xd0000000, length:0x10000000
[69776.539692] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[69776.539697] [fglrx] Reserved FB block: Unshared offset:ff77000, size:88000
[69877.867959] ppdev0: registered pardevice
[69877.916121] ppdev0: unregistered pardevice
[69878.010242] ppdev0: registered pardevice
[69878.056174] ppdev0: unregistered pardevice
[69879.404998] usblp0: nonzero read bulk status received: -71
[69879.412241] usblp1: nonzero read bulk status received: -71
[69880.440215] ppdev0: registered pardevice
[69880.488020] ppdev0: unregistered pardevice

[linuxman]

Κάνε εγκατάσταση το tvtime και δοκίμασε με κεραία να κάνεις scan channel .

[aantonis]

Δυστυχώς παρόλο που έχω εγκαταστήσει το tvtime δεν βλέπω πουθενά την εντολή scan channel στο πρόγραμμα αυτό

[linuxman]

Δυστυχώς παρόλο που έχω εγκαταστήσει το tvtime δεν βλέπω πουθενά την εντολή scan channel στο πρόγραμμα αυτό

Δεξή πλήκτρο και λογικά θα δεις .

[aantonis]

Στο δεξιό κλικ έχω τα εξής:

setup
input configuration
picture settings
video processing
output configuration
exit menu

Αν και έψαξα όλα τα υπομενού δεν βρήκα όμως καμία εντολή για scan