Απενεργοποιηση καμμενης καρτας γραφικων αποριες

[Lionux]

Χαιρετω την κοινοτητα , πριν λιγες μερες παρελαβα απο εναν γνωστο μου ενα φορητο υπολογιστη Toshiba Satellite A300 του οποιου ειχε γινει τεχνικος ελεγχος (σε καταστημα Πλαισιο) κ του οποιου ειχε διαγνωστει καμμενη καρτα γραφικων ! Ο γνωστος μου δεν μπηκε στην διαδικασια να κανει επισκευη διοτι του ζητησαν γυρω στα 250 ευρω !!! Ετσι λοιπον μου εδωσε το φορητο χωρις σκληρο δισκο για δοκιμες !!!

Ξεκινησα λοιπον ως ανησυχο πνευμα τα δοκιμαστικα τα οποια στο τελος ειχαν ευτυχη καταληξει , αν και μου δημιουργησαν πολλες αποριες .
Αρχικα να πω πως μπουταρα τον φορητο με εναν εξωτερικο σκληρο στον οποιο ειχα εγκαταστησει μινιμαλ ubuntu 13.04 με γραφικο περιβαλλον lxde . To αποτελεσμα ηταν να εκκινησει ο υπολογιστης να μπει στο γραφικο περιβαλλον αλλα μετα απο ενα λεπτο μου εβγαλε καποιες καθετες γραμμες κ κολλησε στην κυριολεξια το συμπαν ! Αναγκαστηκα να κλεισω το μηχανημα απο το κουμπι . Επειτα εκανα δευτερη αποπειρα κ ξανα τα ιδια , για να μην σας κουραζω οι ανεπιτυχεις αποπειρες μου διαδεχονταν η μια την αλλη με την μονη διαφορα πως ειτε παγωνε το συμπαν εμφανιζοντας στην οθονη μου καθετες γραμμες ειτε απλα παγωνε χωρις να μπορω σε καμια απο τις περιπτωσεις αυτες να κανω τιποτα αλλο εκτος του να απενεργοποιησω το μηχανημα απο το κουμπι ! Οπως ακριβως συμπεροφεροταν ο υπολογιστης κ στον γνωστο μου οταν χρησιμοποιουσε λειτουργικο windows . Σε καθεμια ομως απο αυτες τις προσπαθειες προλαβαινα να μπω στο τερματικο κ να παιρνω διαφορες πληροφοριες οπως π.χ τις καρτας γραφικων που ηταν το πρωτο μου ζητουμενο. Ετσι λοιπον η καρτα που φοραει ειναι :

Κώδικας: Επιλογή όλων

jim@lubuntu:~$ lspci -v | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV620/M82 [Mobility Radeon HD 3450/3470]

Προσπαθησα μεσω διαδικτυου να βρω ενα τροπο για το πως μπορω να απενεργοποιησω την καρτα γραφικων , μα στις περισσοτερες φορες εβρισκα πληροφοριες για το πως μπορει να γινει αυτο οταν ο υπολογιστης εχει δυο καρτες γραφικων κ συγκεκριμενα στην εξωτερικη καρτα γραφικων . Διαβαζοντας πολλα κ διαφορα βρηκα τελικα σε ενα site μια ανορθοδοξη λυση ! Συγκεκριμενα περασα στον Grub την παρακατω εγγραφη με την οποια τελικα το μηχανημα δουλευει !!!

Κώδικας: Επιλογή όλων

GRUB_CMDLINE_LINUX_DEFAULT acpi=off radeon.modeset=0

Οι αποριες μου ειναι οι εξης ¨:

α. Γνωριζει κανεις αν με την συγκεκριμενη παραμετρο πραγματι απενεργοποιειται η καρτα γραφικων ;
β. Υπαρχει πιθανοτητα η καρτα γραφικων να μην ειναι καμμενη ;
γ. Με ποιο τροπο μπορω να δω αν οταν εκκινει ο υπολογιστης αν ειναι με software driver ή χρησιμοποιει την καρτα γραφικων ;
δ. Υπαρχει πιθανοτητα χρησιμοποιωντας αυτην την εγγραφη, αυτον τον τροπο , να παθει μεγαλυτερη ζημια ο φορητος υπολογιστης ;
ε. Εχει ποτε δοκιμασει κανεις κατι παρομοιο σε υπολογιστη με καμμενη καρτα γραφικων ;

Eιλικρινα σας ευχαριστω εκ των προτερων για το χρονο σας !

[pc_magas]

Χαιρετω την κοινοτητα , πριν λιγες μερες παρελαβα απο εναν γνωστο μου ενα φορητο υπολογιστη Toshiba Satellite A300 του οποιου ειχε γινει τεχνικος ελεγχος (σε καταστημα Πλαισιο) κ του οποιου ειχε διαγνωστει καμμενη καρτα γραφικων ! Ο γνωστος μου δεν μπηκε στην διαδικασια να κανει επισκευη διοτι του ζητησαν γυρω στα 250 ευρω !!! Ετσι λοιπον μου εδωσε το φορητο χωρις σκληρο δισκο για δοκιμες !!!

Ξεκινησα λοιπον ως ανησυχο πνευμα τα δοκιμαστικα τα οποια στο τελος ειχαν ευτυχη καταληξει , αν και μου δημιουργησαν πολλες αποριες .
Αρχικα να πω πως μπουταρα τον φορητο με εναν εξωτερικο σκληρο στον οποιο ειχα εγκαταστησει μινιμαλ ubuntu 13.04 με γραφικο περιβαλλον lxde . To αποτελεσμα ηταν να εκκινησει ο υπολογιστης να μπει στο γραφικο περιβαλλον αλλα μετα απο ενα λεπτο μου εβγαλε καποιες καθετες γραμμες κ κολλησε στην κυριολεξια το συμπαν ! Αναγκαστηκα να κλεισω το μηχανημα απο το κουμπι . Επειτα εκανα δευτερη αποπειρα κ ξανα τα ιδια , για να μην σας κουραζω οι ανεπιτυχεις αποπειρες μου διαδεχονταν η μια την αλλη με την μονη διαφορα πως ειτε παγωνε το συμπαν εμφανιζοντας στην οθονη μου καθετες γραμμες ειτε απλα παγωνε χωρις να μπορω σε καμια απο τις περιπτωσεις αυτες να κανω τιποτα αλλο εκτος του να απενεργοποιησω το μηχανημα απο το κουμπι ! Οπως ακριβως συμπεροφεροταν ο υπολογιστης κ στον γνωστο μου οταν χρησιμοποιουσε λειτουργικο windows . Σε καθεμια ομως απο αυτες τις προσπαθειες προλαβαινα να μπω στο τερματικο κ να παιρνω διαφορες πληροφοριες οπως π.χ τις καρτας γραφικων που ηταν το πρωτο μου ζητουμενο. Ετσι λοιπον η καρτα που φοραει ειναι :

Κώδικας: Επιλογή όλων

jim@lubuntu:~$ lspci -v | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV620/M82 [Mobility Radeon HD 3450/3470]

Προσπαθησα μεσω διαδικτυου να βρω ενα τροπο για το πως μπορω να απενεργοποιησω την καρτα γραφικων , μα στις περισσοτερες φορες εβρισκα πληροφοριες για το πως μπορει να γινει αυτο οταν ο υπολογιστης εχει δυο καρτες γραφικων κ συγκεκριμενα στην εξωτερικη καρτα γραφικων . Διαβαζοντας πολλα κ διαφορα βρηκα τελικα σε ενα site μια ανορθοδοξη λυση ! Συγκεκριμενα περασα στον grub την παρακατω εγγραφη με την οποια τελικα το μηχανημα δουλευει !!!

Κώδικας: Επιλογή όλων

GRUB_CMDLINE_LINUX_DEFAULT acpi=off radeon.modeset=0

Οι αποριες μου ειναι οι εξης ¨:

α. Γνωριζει κανεις αν με την συγκεκριμενη παραμετρο πραγματι απενεργοποιειται η καρτα γραφικων ;
β. Υπαρχει πιθανοτητα η καρτα γραφικων να μην ειναι καμμενη ;
γ. Με ποιο τροπο μπορω να δω αν οταν εκκινει ο υπολογιστης αν ειναι με software driver ή χρησιμοποιει την καρτα γραφικων ;
δ. Υπαρχει πιθανοτητα χρησιμοποιωντας αυτην την εγγραφη, αυτον τον τροπο , να παθει μεγαλυτερη ζημια ο φορητος υπολογιστης ;
ε. Εχει ποτε δοκιμασει κανεις κατι παρομοιο σε υπολογιστη με καμμενη καρτα γραφικων ;

Eιλικρινα σας ευχαριστω εκ των προτερων για το χρονο σας !

Μήπως ΔΕΝ ΕΧΕΙ άλλη κάρτα γραφικών;
Αν ναι ίσως να θέλει reballing - ψήσιμο. Η ακόμη και κάποια επισκευή στην οθόνη.
Με απλά λόγια να είναι Hardware issue.

[eliasps]

Kαλησπέρα.

α. Γνωριζει κανεις αν με την συγκεκριμενη παραμετρο πραγματι απενεργοποιειται η καρτα γραφικων ;

Δώσε το αποτέλεσμα των εντολών:

Κώδικας: Επιλογή όλων

sudo lshw -c display
lsusb

β. Υπαρχει πιθανοτητα η καρτα γραφικων να μην ειναι καμμενη ;

Από την περιγραφή ναι, φαίνεται να υπάρχει τεχνική βλάβη (υλικού) στην κάρτα γραφικών. Tώρα αν είναι καμμένη ή κάτι άλλο, δεν γνωρίζω.

γ. Με ποιο τροπο μπορω να δω αν οταν εκκινει ο υπολογιστης αν ειναι με software driver ή χρησιμοποιει την καρτα γραφικων ;

Για τέτοιες πληροφορίες η εντολή βοηθάει το αποτέλεσμα της εντολής dmesg, το οποίο είναι αρκετά μεγάλο.
Εκτέλεσε στο τερματικό:

Κώδικας: Επιλογή όλων

dmesg > dmesg.txt
gedit dmesg.txt

Θα ανοίξει ο κειμενογράφος gedit με το αποτέλεσμα της dmesg. Αντέγραψέ το και κάν'το επικόλληση εδώ να το δούμε.

δ. Υπαρχει πιθανοτητα χρησιμοποιωντας αυτην την εγγραφη, αυτον τον τροπο , να παθει μεγαλυτερη ζημια ο φορητος υπολογιστης ;

Δεν νομίζω, αλλά περίμενε περισσότερες γνώμες.

ε. Εχει ποτε δοκιμασει κανεις κατι παρομοιο σε υπολογιστη με καμμενη καρτα γραφικων ;

Προσωπικά ναι, είχα απενεργοποιήσει μία κάρτα γραφικών σε έναν υπολογιστή, αλλά όχι με τον ίδιο τρόπο.
Είχα κάνει κάτι τέτοιο: http://planetoss.com/articles/how-to-disable-the-discrete-amd-graphics-card-in-linux/
Αλλά μην το κάνεις, μέχρι να δούμε τα αποτελέσματα από τις εντολές.
Πιθανότατα να μη χρειαστεί να κάνεις τίποτα, αφού ο υπολογιστής λειτουργεί ως έχει.

[the_eye]

Κώδικας: Επιλογή όλων

jim@lubuntu:~$ sudo lshw -c display
*-display UNCLAIMED
description: VGA compatible controller
product: RV620/M82 [Mobility Radeon HD 3450/3470]
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list
configuration: latency=0
resources: memory:c0000000-cfffffff ioport:5000(size=256) memory:d6300000-d630ffff memory:d6320000-d633ffff

Κώδικας: Επιλογή όλων

jim@lubuntu:~$ lsusb
Bus 001 Device 003: ID 04f2:b008 Chicony Electronics Co., Ltd USB 2.0 Camera
Bus 002 Device 002: ID 1058:0702 Western Digital Technologies, Inc. Passport External HDD
Bus 003 Device 002: ID 0930:0200 Toshiba Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-31-generic (buildd@aatxe) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #46-Ubuntu SMP Tue Sep 10 19:56:49 UTC 2013 (Ubuntu 3.8.0-31.46-generic 3.8.13.8)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd6bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd6c000-0x00000000bfdbefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfdbf000-0x00000000bfe85fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe86000-0x00000000bfebefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfebf000-0x00000000bfeebfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfeec000-0x00000000bfefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfeff000-0x00000000bfefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: TOSHIBA Satellite A300/Portable PC, BIOS 2.20 12/07/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbff00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-CFFFF uncachable
[ 0.000000] D0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[ 0.000000] RAMDISK: [mem 0x3614c000-0x3709dfff]
[ 0.000000] 2179MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0xbfefffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbfd6bfff]
[ 0.000000] node 0: [mem 0xbfdbf000-0xbfe85fff]
[ 0.000000] node 0: [mem 0xbfebf000-0xbfeebfff]
[ 0.000000] node 0: [mem 0xbfeff000-0xbfefffff]
[ 0.000000] On node 0 totalpages: 785903
[ 0.000000] free_area_init_node: node 0, pgdat c18f7f00, node_mem_map f494c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4359 pages used for memmap
[ 0.000000] HighMem zone: 553308 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bdd000 s34944 r0 d22400 u57344
[ 0.000000] pcpu-alloc: s34944 r0 d22400 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779760
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-31-generic root=UUID=a0605a5c-aa82-48af-a0e0-5edf62fa3744 ro nomodeset acpi=off radeon.modeset=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 6289280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:000bff00)
[ 0.000000] Memory: 3085276k/3144704k available (6259k kernel code, 58336k reserved, 2973k data, 788k init, 2230668k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1905000 - 0xc19ca000 ( 788 kB)
[ 0.000000] .data : 0xc161cd30 - 0xc1904240 (2973 kB)
[ 0.000000] .text : 0xc1000000 - 0xc161cd30 (6259 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f4406000 soft=f4408000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2161.273 MHz processor
[ 0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.54 BogoMIPS (lpj=8645092)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004044] Security Framework initialized
[ 0.004058] AppArmor: AppArmor initialized
[ 0.004061] Yama: becoming mindful.
[ 0.004112] Mount-cache hash table entries: 512
[ 0.004328] Initializing cgroup subsys cpuacct
[ 0.004334] Initializing cgroup subsys memory
[ 0.004344] Initializing cgroup subsys devices
[ 0.004348] Initializing cgroup subsys freezer
[ 0.004353] Initializing cgroup subsys blkio
[ 0.004357] Initializing cgroup subsys perf_event
[ 0.004363] Initializing cgroup subsys hugetlb
[ 0.004395] CPU: Physical Processor ID: 0
[ 0.004399] CPU: Processor Core ID: 0
[ 0.004404] mce: CPU supports 6 MCE banks
[ 0.004413] CPU0: Thermal monitoring enabled (TM2)
[ 0.004419] process: using mwait in idle threads
[ 0.004430] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.004430] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.004430] tlb_flushall_shift: -1
[ 0.013661] Freeing SMP alternatives: 24k freed
[ 0.015633] ftrace: allocating 26139 entries in 52 pages
[ 0.024107] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.024117] smpboot: SMP motherboard not detected
[ 0.024122] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.132015] smpboot: SMP disabled
[ 0.132019] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.132031] perf_event_intel: PEBS disabled due to CPU errata
[ 0.132036] ... version: 2
[ 0.132039] ... bit width: 40
[ 0.132042] ... generic registers: 2
[ 0.132046] ... value mask: 000000ffffffffff
[ 0.132049] ... max period: 000000007fffffff
[ 0.132053] ... fixed-purpose events: 3
[ 0.132056] ... event mask: 0000000700000003
[ 0.133215] Brought up 1 CPUs
[ 0.133221] smpboot: Total of 1 processors activated (4322.54 BogoMIPS)
[ 0.133308] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.133432] devtmpfs: initialized
[ 0.133650] EVM: security.selinux
[ 0.133654] EVM: security.SMACK64
[ 0.133657] EVM: security.capability
[ 0.133759] PM: Registering ACPI NVS region [mem 0xbfe86000-0xbfebefff] (233472 bytes)
[ 0.134840] regulator-dummy: no parameters
[ 0.134900] NET: Registered protocol family 16
[ 0.135066] EISA bus registered
[ 0.136976] PCI: Using configuration type 1 for base access
[ 0.138071] bio: create slab <bio-0> at 0
[ 0.138168] ACPI: Interpreter disabled.
[ 0.138252] vgaarb: loaded
[ 0.138468] SCSI subsystem initialized
[ 0.138505] libata version 3.00 loaded.
[ 0.138542] usbcore: registered new interface driver usbfs
[ 0.138554] usbcore: registered new interface driver hub
[ 0.138577] usbcore: registered new device driver usb
[ 0.138680] PCI: Probing PCI hardware
[ 0.138686] PCI: root bus 00: using default resources
[ 0.138688] PCI: Probing PCI hardware (bus 00)
[ 0.138709] PCI host bridge to bus 0000:00
[ 0.138715] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.138721] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.138726] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.138743] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.138769] DMAR: Forcing write-buffer flush capability
[ 0.138773] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.138808] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.138861] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.138923] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.139011] pci 0000:00:1a.0: reg 20: [io 0x60e0-0x60ff]
[ 0.139113] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.139200] pci 0000:00:1a.1: reg 20: [io 0x60c0-0x60df]
[ 0.139312] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.140007] pci 0000:00:1a.7: reg 10: [mem 0xd6405c00-0xd6405fff]
[ 0.146556] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.146601] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.146623] pci 0000:00:1b.0: reg 10: [mem 0xd6400000-0xd6403fff 64bit]
[ 0.146724] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146751] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.146857] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146890] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.146985] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.147022] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.147123] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.147163] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.147249] pci 0000:00:1d.0: reg 20: [io 0x60a0-0x60bf]
[ 0.147352] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.147433] pci 0000:00:1d.1: reg 20: [io 0x6080-0x609f]
[ 0.147534] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.147621] pci 0000:00:1d.2: reg 20: [io 0x6060-0x607f]
[ 0.147722] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.147806] pci 0000:00:1d.3: reg 20: [io 0x6040-0x605f]
[ 0.148041] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.149130] pci 0000:00:1d.7: reg 10: [mem 0xd6405800-0xd6405bff]
[ 0.155129] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.155163] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.155252] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.155415] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.155442] pci 0000:00:1f.2: reg 10: [io 0x6108-0x610f]
[ 0.155454] pci 0000:00:1f.2: reg 14: [io 0x6114-0x6117]
[ 0.155465] pci 0000:00:1f.2: reg 18: [io 0x6100-0x6107]
[ 0.155477] pci 0000:00:1f.2: reg 1c: [io 0x6110-0x6113]
[ 0.155488] pci 0000:00:1f.2: reg 20: [io 0x6020-0x603f]
[ 0.155499] pci 0000:00:1f.2: reg 24: [mem 0xd6405000-0xd64057ff]
[ 0.155571] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.155596] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.155618] pci 0000:00:1f.3: reg 10: [mem 0xd6406000-0xd64060ff 64bit]
[ 0.155649] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
[ 0.155739] pci 0000:01:00.0: [1002:95c4] type 00 class 0x030000
[ 0.155755] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.155767] pci 0000:01:00.0: reg 14: [io 0x5000-0x50ff]
[ 0.155780] pci 0000:01:00.0: reg 18: [mem 0xd6300000-0xd630ffff]
[ 0.156029] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.156086] pci 0000:01:00.0: supports D1 D2
[ 0.164013] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.164020] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.164024] pci 0000:00:01.0: bridge window [mem 0xd6300000-0xd63fffff]
[ 0.164029] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.164160] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.164218] pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.164330] pci 0000:02:00.0: reg 18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.164399] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.164443] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.164705] pci 0000:02:00.0: supports D1 D2
[ 0.164707] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.164852] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.164860] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
[ 0.164865] pci 0000:00:1c.0: bridge window [mem 0xd5300000-0xd62fffff]
[ 0.164873] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.164959] pci 0000:03:00.0: [168c:002a] type 00 class 0x028000
[ 0.164989] pci 0000:03:00.0: reg 10: [mem 0xd4200000-0xd420ffff 64bit]
[ 0.165149] pci 0000:03:00.0: supports D1
[ 0.165151] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.165181] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.165198] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.165205] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.165210] pci 0000:00:1c.1: bridge window [mem 0xd4200000-0xd52fffff]
[ 0.165218] pci 0000:00:1c.1: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.165271] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.165278] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.165283] pci 0000:00:1c.4: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.165291] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd30fffff 64bit pref]
[ 0.165348] pci 0000:04:06.0: [1180:0832] type 00 class 0x0c0010
[ 0.165374] pci 0000:04:06.0: reg 10: [mem 0xd3100000-0xd31007ff]
[ 0.165481] pci 0000:04:06.0: supports D1 D2
[ 0.165484] pci 0000:04:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165508] pci 0000:04:06.1: [1180:0822] type 00 class 0x080500
[ 0.165530] pci 0000:04:06.1: reg 10: [mem 0xd3100a00-0xd3100aff]
[ 0.165635] pci 0000:04:06.1: supports D1 D2
[ 0.165637] pci 0000:04:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165663] pci 0000:04:06.2: [1180:0592] type 00 class 0x088000
[ 0.165686] pci 0000:04:06.2: reg 10: [mem 0xd3100900-0xd31009ff]
[ 0.165793] pci 0000:04:06.2: supports D1 D2
[ 0.165795] pci 0000:04:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165821] pci 0000:04:06.3: [1180:0852] type 00 class 0x088000
[ 0.165845] pci 0000:04:06.3: reg 10: [mem 0xd3100800-0xd31008ff]
[ 0.165952] pci 0000:04:06.3: supports D1 D2
[ 0.165954] pci 0000:04:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166013] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.166023] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.166031] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.166033] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.166061] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 07
[ 0.166459] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.167110] PCI: root bus ff: using default resources
[ 0.167112] PCI: Probing PCI hardware (bus ff)
[ 0.167138] PCI host bridge to bus 0000:ff
[ 0.167143] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.167148] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.167153] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.167204] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.167206] PCI: Discovered primary peer bus ff [IRQ]
[ 0.167215] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2919]
[ 0.167269] PCI: pci_cache_line_size set to 64 bytes
[ 0.167369] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.167371] e820: reserve RAM buffer [mem 0xbfd6c000-0xbfffffff]
[ 0.167374] e820: reserve RAM buffer [mem 0xbfe86000-0xbfffffff]
[ 0.167376] e820: reserve RAM buffer [mem 0xbfeec000-0xbfffffff]
[ 0.167378] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
[ 0.167477] NetLabel: Initializing
[ 0.167481] NetLabel: domain hash size = 128
[ 0.167484] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.167496] NetLabel: unlabeled traffic allowed by default
[ 0.167620] Switching to clocksource refined-jiffies
[ 0.174205] AppArmor: AppArmor Filesystem Enabled
[ 0.174240] pnp: PnP ACPI: disabled
[ 0.174246] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.174636] PnPBIOS: Found PnP BIOS installation structure at 0xc00fe0f0
[ 0.174646] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xba2f, dseg 0x400
[ 0.174655] PNPBIOS fault.. attempting recovery.
[ 0.174659] PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
[ 0.174664] PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably
[ 0.174670] PnPBIOS: Check with your vendor for an updated BIOS
[ 0.174674] PnPBIOS: dev_node_info: unexpected status 0x24
[ 0.174677] PnPBIOS: Unable to get node info. Aborting.
[ 0.176193] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.176202] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.176270] pci 0000:01:00.0: BAR 6: assigned [mem 0xd6320000-0xd633ffff pref]
[ 0.176277] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.176282] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.176289] pci 0000:00:01.0: bridge window [mem 0xd6300000-0xd63fffff]
[ 0.176296] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.176306] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[ 0.176312] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.176317] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
[ 0.176327] pci 0000:00:1c.0: bridge window [mem 0xd5300000-0xd62fffff]
[ 0.176334] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.176345] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.176351] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.176359] pci 0000:00:1c.1: bridge window [mem 0xd4200000-0xd52fffff]
[ 0.176367] pci 0000:00:1c.1: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.176379] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.176385] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.176393] pci 0000:00:1c.4: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.176402] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd30fffff 64bit pref]
[ 0.176413] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.176422] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.176443] PCI: setting IRQ 5 as level-triggered
[ 0.176448] pci 0000:00:01.0: found PCI INT A -> IRQ 5
[ 0.176521] pci 0000:00:01.0: sharing IRQ 5 with 0000:02:00.0
[ 0.176558] PCI: setting IRQ 11 as level-triggered
[ 0.176561] pci 0000:00:1c.0: found PCI INT A -> IRQ 11
[ 0.176592] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1c.4
[ 0.176644] pci 0000:00:1c.0: sharing IRQ 11 with 0000:03:00.0
[ 0.176678] pci 0000:00:1c.1: found PCI INT B -> IRQ 5
[ 0.176751] pci 0000:00:1c.1: sharing IRQ 5 with 0000:02:00.0
[ 0.176782] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.176795] pci 0000:00:1c.4: found PCI INT A -> IRQ 11
[ 0.176873] pci 0000:00:1c.4: sharing IRQ 11 with 0000:03:00.0
[ 0.176905] pci 0000:00:1e.0: setting latency timer to 64
[ 0.176909] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.176912] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.176915] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.176917] pci_bus 0000:01: resource 1 [mem 0xd6300000-0xd63fffff]
[ 0.176920] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.176923] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.176925] pci_bus 0000:02: resource 1 [mem 0xd5300000-0xd62fffff]
[ 0.176928] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.176930] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.176933] pci_bus 0000:03: resource 1 [mem 0xd4200000-0xd52fffff]
[ 0.176935] pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.176938] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.176940] pci_bus 0000:06: resource 1 [mem 0xd3200000-0xd41fffff]
[ 0.176943] pci_bus 0000:06: resource 2 [mem 0xd2100000-0xd30fffff 64bit pref]
[ 0.176945] pci_bus 0000:04: resource 1 [mem 0xd3100000-0xd31fffff]
[ 0.176948] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.176950] pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.176953] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.176955] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.176998] NET: Registered protocol family 2
[ 0.177161] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.177198] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.177242] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.177280] TCP: reno registered
[ 0.177285] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.177298] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.177351] NET: Registered protocol family 1
[ 0.177379] pci 0000:00:1a.0: found PCI INT A -> IRQ 5
[ 0.177453] pci 0000:00:1a.0: sharing IRQ 5 with 0000:02:00.0
[ 0.177509] PCI: setting IRQ 10 as level-triggered
[ 0.177513] pci 0000:00:1a.1: found PCI INT B -> IRQ 10
[ 0.177640] pci 0000:00:1a.7: found PCI INT D -> IRQ 11
[ 0.177680] pci 0000:00:1a.7: sharing IRQ 11 with 0000:00:1d.1
[ 0.177704] pci 0000:00:1a.7: sharing IRQ 11 with 0000:00:1f.2
[ 0.192040] pci 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 0.192091] pci 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7
[ 0.192167] pci 0000:00:1d.1: found PCI INT B -> IRQ 11
[ 0.192183] pci 0000:00:1d.1: sharing IRQ 11 with 0000:00:1a.7
[ 0.192227] pci 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.2
[ 0.192299] pci 0000:00:1d.2: found PCI INT D -> IRQ 5
[ 0.192368] pci 0000:00:1d.2: sharing IRQ 5 with 0000:02:00.0
[ 0.192426] pci 0000:00:1d.3: found PCI INT C -> IRQ 11
[ 0.192485] pci 0000:00:1d.3: sharing IRQ 11 with 0000:00:1f.3
[ 0.192554] pci 0000:00:1d.7: found PCI INT A -> IRQ 11
[ 0.192588] pci 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0
[ 0.208032] pci 0000:01:00.0: Boot video device
[ 0.208047] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.208094] Trying to unpack rootfs image as initramfs...
[ 0.523573] Freeing initrd memory: 15688k freed
[ 0.532636] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.532838] Initialise module verification
[ 0.532887] audit: initializing netlink socket (disabled)
[ 0.532912] type=2000 audit(1381245424.532:1): initialized
[ 0.555911] bounce pool size: 64 pages
[ 0.555926] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.557458] VFS: Disk quotas dquot_6.5.2
[ 0.557511] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.558050] fuse init (API version 7.20)
[ 0.558136] msgmni has been set to 1699
[ 0.558426] Key type asymmetric registered
[ 0.558431] Asymmetric key parser 'x509' registered
[ 0.558471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.558500] io scheduler noop registered
[ 0.558504] io scheduler deadline registered (default)
[ 0.558513] io scheduler cfq registered
[ 0.558808] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.558827] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.558882] intel_idle: does not run on family 6 model 15
[ 0.558994] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.560215] Linux agpgart interface v0.103
[ 0.561531] brd: module loaded
[ 0.561773] isapnp: Scanning for PnP cards...
[ 0.567728] loop: module loaded
[ 0.568139] libphy: Fixed MDIO Bus: probed
[ 0.568213] tun: Universal TUN/TAP device driver, 1.6
[ 0.568217] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.568262] PPP generic driver version 2.4.2
[ 0.568304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.568309] ehci-pci: EHCI PCI platform driver
[ 0.568334] ehci-pci 0000:00:1a.7: found PCI INT D -> IRQ 11
[ 0.568374] ehci-pci 0000:00:1a.7: sharing IRQ 11 with 0000:00:1d.1
[ 0.568398] ehci-pci 0000:00:1a.7: sharing IRQ 11 with 0000:00:1f.2
[ 0.568458] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 0.568462] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.568471] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.568493] ehci-pci 0000:00:1a.7: debug port 1
[ 0.572388] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.615962] ehci-pci 0000:00:1a.7: irq 11, io mem 0xd6405c00
[ 0.659536] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.659589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.659594] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.659601] usb usb1: Product: EHCI Host Controller
[ 0.659605] usb usb1: Manufacturer: Linux 3.8.0-31-generic ehci_hcd
[ 0.659610] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.703271] hub 1-0:1.0: USB hub found
[ 0.703278] hub 1-0:1.0: 4 ports detected
[ 0.703373] ehci-pci 0000:00:1d.7: found PCI INT A -> IRQ 11
[ 0.703408] ehci-pci 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0
[ 0.703482] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.703486] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.703494] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.703513] ehci-pci 0000:00:1d.7: debug port 1
[ 0.707425] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.707434] ehci-pci 0000:00:1d.7: irq 11, io mem 0xd6405800
[ 0.751014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.751064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.751070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.751076] usb usb2: Product: EHCI Host Controller
[ 0.751080] usb usb2: Manufacturer: Linux 3.8.0-31-generic ehci_hcd
[ 0.751085] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.881756] hub 2-0:1.0: USB hub found
[ 0.881763] hub 2-0:1.0: 8 ports detected
[ 0.881891] ehci-platform: EHCI generic platform driver
[ 0.881904] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.881925] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.881948] uhci_hcd 0000:00:1a.0: found PCI INT A -> IRQ 5
[ 0.882022] uhci_hcd 0000:00:1a.0: sharing IRQ 5 with 0000:02:00.0
[ 0.882054] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.882058] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.882067] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.882099] uhci_hcd 0000:00:1a.0: irq 11, io base 0x000060e0
[ 0.882134] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.882139] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.882145] usb usb3: Product: UHCI Host Controller
[ 0.882150] usb usb3: Manufacturer: Linux 3.8.0-31-generic uhci_hcd
[ 0.882155] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.882243] hub 3-0:1.0: USB hub found
[ 0.882250] hub 3-0:1.0: 2 ports detected
[ 0.882324] uhci_hcd 0000:00:1a.1: found PCI INT B -> IRQ 10
[ 0.882424] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.882428] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.882435] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.882469] uhci_hcd 0000:00:1a.1: irq 10, io base 0x000060c0
[ 0.882504] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.882510] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.882516] usb usb4: Product: UHCI Host Controller
[ 0.882520] usb usb4: Manufacturer: Linux 3.8.0-31-generic uhci_hcd
[ 0.882525] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.882610] hub 4-0:1.0: USB hub found
[ 0.882616] hub 4-0:1.0: 2 ports detected
[ 0.882691] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 0.882742] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7
[ 0.882796] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.882799] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.882806] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.882839] uhci_hcd 0000:00:1d.0: irq 11, io base 0x000060a0
[ 0.882874] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.882880] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.882886] usb usb5: Product: UHCI Host Controller
[ 0.882890] usb usb5: Manufacturer: Linux 3.8.0-31-generic uhci_hcd
[ 0.882895] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.882974] hub 5-0:1.0: USB hub found
[ 0.882981] hub 5-0:1.0: 2 ports detected
[ 0.883053] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 11
[ 0.883070] uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1a.7
[ 0.883116] uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.2
[ 0.883162] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.883166] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.883173] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.883206] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00006080
[ 0.883240] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.883246] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.883252] usb usb6: Product: UHCI Host Controller
[ 0.883257] usb usb6: Manufacturer: Linux 3.8.0-31-generic uhci_hcd
[ 0.883261] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.883342] hub 6-0:1.0: USB hub found
[ 0.883348] hub 6-0:1.0: 2 ports detected
[ 0.883420] uhci_hcd 0000:00:1d.2: found PCI INT D -> IRQ 5
[ 0.883493] uhci_hcd 0000:00:1d.2: sharing IRQ 5 with 0000:02:00.0
[ 0.883525] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.883528] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.883535] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.883567] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00006060
[ 0.883601] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.883607] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.883613] usb usb7: Product: UHCI Host Controller
[ 0.883617] usb usb7: Manufacturer: Linux 3.8.0-31-generic uhci_hcd
[ 0.883622] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.883700] hub 7-0:1.0: USB hub found
[ 0.883706] hub 7-0:1.0: 2 ports detected
[ 0.883778] uhci_hcd 0000:00:1d.3: found PCI INT C -> IRQ 11
[ 0.883840] uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:1f.3
[ 0.883882] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.883886] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.883893] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.883925] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00006040
[ 0.883959] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.883965] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.883971] usb usb8: Product: UHCI Host Controller
[ 0.883975] usb usb8: Manufacturer: Linux 3.8.0-31-generic uhci_hcd
[ 0.883980] usb usb8: SerialNumber: 0000:00:1d.3
[ 0.884077] hub 8-0:1.0: USB hub found
[ 0.884083] hub 8-0:1.0: 2 ports detected
[ 0.884198] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.944104] isapnp: No Plug & Play device found
[ 0.956051] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.956059] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.956160] mousedev: PS/2 mouse device common for all mice
[ 0.957388] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.957415] rtc0: alarms up to one day, 114 bytes nvram
[ 0.957512] device-mapper: uevent: version 1.0.3
[ 0.957572] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.957594] EISA: Probing bus 0 at eisa.0
[ 0.957602] Cannot allocate resource for EISA slot 1
[ 0.957606] Cannot allocate resource for EISA slot 2
[ 0.957610] Cannot allocate resource for EISA slot 3
[ 0.957614] Cannot allocate resource for EISA slot 4
[ 0.957617] Cannot allocate resource for EISA slot 5
[ 0.957621] Cannot allocate resource for EISA slot 6
[ 0.957633] EISA: Detected 0 cards.
[ 0.957644] cpufreq-nforce2: No nForce2 chipset.
[ 0.957649] cpuidle: using governor ladder
[ 0.957653] cpuidle: using governor menu
[ 0.957657] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.957661] EFI Variables Facility v0.08 2004-May-17
[ 0.957828] ashmem: initialized
[ 0.957963] TCP: cubic registered
[ 0.958069] NET: Registered protocol family 10
[ 0.958261] NET: Registered protocol family 17
[ 0.958276] Key type dns_resolver registered
[ 0.958430] Using IPI No-Shortcut mode
[ 0.958499] Loading module verification certificates
[ 0.963497] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: be06a87ed5dd6bd2e94b82fbc0aa607728b7aeda'
[ 0.963515] registered taskstats version 1
[ 0.966185] Key type trusted registered
[ 0.968480] Key type encrypted registered
[ 0.971255] rtc_cmos rtc_cmos: setting system clock to 2013-10-08 15:17:05 UTC (1381245425)
[ 0.971299] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.971304] EDD information not available.
[ 0.971435] Freeing unused kernel memory: 788k freed
[ 0.971708] Write protecting the kernel text: 6260k
[ 0.971756] Write protecting the kernel read-only data: 2436k
[ 0.971760] NX-protecting the kernel data: 3980k
[ 0.987617] udevd[89]: starting version 175
[ 0.992615] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.091660] Disabling lock debugging due to kernel taint
[ 1.125703] ahci 0000:00:1f.2: version 3.0
[ 1.125723] ahci 0000:00:1f.2: found PCI INT B -> IRQ 11
[ 1.125743] ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1a.7
[ 1.125770] ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1d.1
[ 1.125888] ahci 0000:00:1f.2: irq 16 for MSI/MSI-X
[ 1.125983] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.125992] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
[ 1.126002] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.137023] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.137079] r8169 0000:02:00.0: found PCI INT A -> IRQ 5
[ 1.137368] r8169 0000:02:00.0: irq 17 for MSI/MSI-X
[ 1.137552] r8169 0000:02:00.0 eth0: RTL8102e at 0xf8402000, 00:1e:33:9f:fb:c7, XID 14a00000 IRQ 17
[ 1.142503] sdhci: Secure Digital Host Controller Interface driver
[ 1.142512] sdhci: Copyright(c) Pierre Ossman
[ 1.154861] scsi0 : ahci
[ 1.157991] scsi1 : ahci
[ 1.160089] scsi2 : ahci
[ 1.162997] sdhci-pci 0000:04:06.1: SDHCI controller found [1180:0822] (rev 22)
[ 1.164037] sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.164083] mmc0: no vqmmc regulator found
[ 1.164099] scsi3 : ahci
[ 1.167215] scsi4 : ahci
[ 1.170474] scsi5 : ahci
[ 1.170543] ata1: SATA max UDMA/133 abar m2048@0xd6405000 port 0xd6405100 irq 16
[ 1.170551] ata2: SATA max UDMA/133 abar m2048@0xd6405000 port 0xd6405180 irq 16
[ 1.170556] ata3: DUMMY
[ 1.170560] ata4: DUMMY
[ 1.170564] ata5: SATA max UDMA/133 abar m2048@0xd6405000 port 0xd6405300 irq 16
[ 1.170571] ata6: SATA max UDMA/133 abar m2048@0xd6405000 port 0xd6405380 irq 16
[ 1.170661] mmc0: no vmmc regulator found
[ 1.171670] sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.205112] mmc0: SDHCI controller on PCI [0000:04:06.1] using DMA
[ 1.205389] firewire_ohci 0000:04:06.0: setting latency timer to 64
[ 1.231063] sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.269102] firewire_ohci 0000:04:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.293073] sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.316085] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 1.353072] sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.413077] sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.460107] usb 1-2: New USB device found, idVendor=04f2, idProduct=b008
[ 1.460114] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.460119] usb 1-2: Product: Chicony USB 2.0 Camera
[ 1.460124] usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.460129] usb 1-2: SerialNumber: SN0001
[ 1.488102] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.492100] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.496099] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.532091] Switching to clocksource tsc
[ 1.668099] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.672159] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RT04, max UDMA/133
[ 1.676991] ata6.00: configured for UDMA/133
[ 1.682468] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RT04 PQ: 0 ANSI: 5
[ 1.687375] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.687382] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.687491] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.687560] sr 5:0:0:0: Attached scsi generic sg0 type 5
[ 1.700099] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 1.772161] firewire_core 0000:04:06.0: created device fw0: GUID 00080d1e339ffbc7, S400
[ 1.837487] usb 2-3: New USB device found, idVendor=1058, idProduct=0702
[ 1.837495] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.837501] usb 2-3: Product: External HDD
[ 1.837506] usb 2-3: Manufacturer: Western Digital
[ 1.837510] usb 2-3: SerialNumber: 575843383037363133363431
[ 1.840593] Initializing USB Mass Storage driver...
[ 1.840715] scsi6 : usb-storage 2-3:1.0
[ 1.840991] usbcore: registered new interface driver usb-storage
[ 1.840997] USB Mass Storage support registered.
[ 2.076106] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.840747] scsi 6:0:0:0: Direct-Access WD 1600BEVExternal 1.02 PQ: 0 ANSI: 0
[ 2.841273] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 2.843361] sd 6:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.844239] sd 6:0:0:0: [sda] Write Protect is off
[ 2.844245] sd 6:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 2.845104] sd 6:0:0:0: [sda] Asking for cache data failed
[ 2.845109] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 2.847855] sd 6:0:0:0: [sda] Asking for cache data failed
[ 2.847863] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 4.616246] usb 3-1: New USB device found, idVendor=0930, idProduct=0200
[ 4.616253] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.616259] usb 3-1: Product: TAIYO YUDEN for Toshiba(0x0200)
[ 4.616264] usb 3-1: Manufacturer: Broadcom Corp
[ 4.616268] usb 3-1: SerialNumber: 002258E21429
[ 6.473225] sda: sda1 sda2 sda3 sda4
[ 6.476571] sd 6:0:0:0: [sda] Asking for cache data failed
[ 6.476581] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 6.476588] sd 6:0:0:0: [sda] Attached SCSI disk
[ 12.319677] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 26.726868] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.772127] udevd[316]: starting version 175
[ 27.047978] lp: driver loaded but no devices found
[ 27.152723] ACPI Exception: AE_BAD_PARAMETER, Thread 4145663200 could not acquire Mutex [0x1] (20121018/utmutex-278)
[ 27.152738] ACPI Exception: AE_BAD_PARAMETER, Thread 4145663200 could not acquire Mutex [0x1] (20121018/utmutex-278)
[ 27.152741] ACPI Exception: AE_BAD_PARAMETER, Thread 4145663200 could not acquire Mutex [0x1] (20121018/utmutex-278)
[ 27.184466] type=1400 audit(1381245451.712:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=394 comm="apparmor_parser"
[ 27.184963] type=1400 audit(1381245451.712:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=394 comm="apparmor_parser"
[ 27.185219] type=1400 audit(1381245451.712:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=394 comm="apparmor_parser"
[ 27.226461] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[ 27.229416] Bluetooth: Core ver 2.16
[ 27.229968] NET: Registered protocol family 31
[ 27.229971] Bluetooth: HCI device and connection manager initialized
[ 27.229980] Bluetooth: HCI socket layer initialized
[ 27.229983] Bluetooth: L2CAP socket layer initialized
[ 27.229991] Bluetooth: SCO socket layer initialized
[ 27.301411] cfg80211: Calling CRDA to update world regulatory domain
[ 27.312137] usbcore: registered new interface driver btusb
[ 27.446836] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 27.481549] [drm] Initialized drm 1.1.0 20060810
[ 27.544537] Linux video capture interface: v2.00
[ 27.752207] r592 0000:04:06.2: setting latency timer to 64
[ 27.759053] r592: driver successfully loaded
[ 28.038900] Adding 1048572k swap on /mnt/1024MiB.swap. Priority:-1 extents:11 across:1556476k
[ 28.207992] pci 0000:01:00.0: found PCI INT A -> IRQ 5
[ 28.243911] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 28.250561] ath9k 0000:03:00.0: found PCI INT A -> IRQ 11
[ 28.250593] ath9k 0000:03:00.0: sharing IRQ 11 with 0000:00:1c.4
[ 28.683648] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 28.683650] [drm] No driver support for vblank timestamp query.
[ 28.683654] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[ 28.685907] ath: EEPROM regdomain: 0x65
[ 28.685910] ath: EEPROM indicates we should expect a direct regpair map
[ 28.685913] ath: Country alpha2 being used: 00
[ 28.685914] ath: Regpair used: 0x65
[ 28.699253] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 28.702831] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input1
[ 28.702954] usbcore: registered new interface driver uvcvideo
[ 28.702957] USB Video Class driver (1.1.1)
[ 28.711011] r852 0000:04:06.3: setting latency timer to 64
[ 28.713703] r852: driver loaded successfully
[ 28.717919] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 28.749632] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.751051] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8860000, irq=11
[ 28.779813] snd_hda_intel 0000:00:1b.0: found PCI INT A -> IRQ 11
[ 28.779974] snd_hda_intel 0000:00:1b.0: irq 18 for MSI/MSI-X
[ 28.835724] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
[ 28.835935] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 29.022110] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000/0x0, board id: 3655, fw id: 430032
[ 29.022118] psmouse serio1: synaptics: Toshiba Satellite A300 detected, limiting rate to 40pps.
[ 29.116064] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 29.193861] cfg80211: World regulatory domain updated:
[ 29.193867] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 29.193869] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.193872] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 29.193874] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 29.193876] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.193878] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.279426] init: failsafe main process (720) killed by TERM signal
[ 29.633243] type=1400 audit(1381245454.160:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=767 comm="apparmor_parser"
[ 29.633815] type=1400 audit(1381245454.164:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=767 comm="apparmor_parser"
[ 29.634130] type=1400 audit(1381245454.164:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=767 comm="apparmor_parser"
[ 29.644247] type=1400 audit(1381245454.172:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=771 comm="apparmor_parser"
[ 31.795618] init: plymouth-upstart-bridge main process (735) killed by TERM signal
[ 31.824525] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 31.925264] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[ 31.926243] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 36.831714] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 46.869303] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[ 46.869908] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 46.895355] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 46.895358] vesafb: scrolling: redraw
[ 46.895361] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 46.895951] vesafb: framebuffer at 0xc0000000, mapped to 0xf8c80000, using 3072k, total 3072k
[ 46.896831] Console: switching to colour frame buffer device 128x48
[ 46.900001] fb0: VESA VGA frame buffer device
[ 59.393324] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 153.719993] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 158.220472] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 158.440928] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 161.608342] wlan2: authenticate with 00:24:17:af:33:dd
[ 161.624189] wlan2: send auth to 00:24:17:af:33:dd (try 1/3)
[ 161.626476] wlan2: authenticated
[ 161.626496] ath9k 0000:03:00.0 wlan2: disabling HT as WMM/QoS is not supported by the AP
[ 161.626499] ath9k 0000:03:00.0 wlan2: disabling VHT as WMM/QoS is not supported by the AP
[ 161.628200] wlan2: associate with 00:24:17:af:33:dd (try 1/3)
[ 161.630948] wlan2: RX AssocResp from 00:24:17:af:33:dd (capab=0x411 status=0 aid=1)
[ 161.631175] wlan2: associated
[ 161.631191] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[ 1753.101324] Clocksource tsc unstable (delta = 127998055 ns)
[ 1753.101370] Switching to clocksource refined-jiffies
[ 7182.345924] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 7182.403099] JFS: nTxBlock = 8192, nTxLock = 65536
[ 7182.442707] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 7182.539616] QNX4 filesystem 0.2.3 registered.
[ 7182.629511] Btrfs loaded

Pcmagas μια καρτα γραφικων εχει ! Δεν θελω ομως να μπω σε διαδικασια ψησιματος αυτες η πρακτικες με τρομαζουν !!!
Εliasps ελπιζω να βλεπεις κατι !

Σας ευχαριστω κ τους δυο !!!

[pc_magas]

Pcmagas μια καρτα γραφικων εχει ! Δεν θελω ομως να μπω σε διαδικασια ψησιματος αυτες η πρακτικες με τρομαζουν !!!
Εliasps ελπιζω να βλεπεις κατι !

Σας ευχαριστω κ τους δυο !!!

Μπορεί ένας ηλεκτρονικός να στην κάνει την δουλειά αυτήν risk free

Ακόμη υπάρχει και η διαδικασία του manual reballing ή ακόμη αν δεν είναι ενσωματωμένη onboard να αντικατασταθεί.

Προσωπικά πιστεύω 100% ότι είναι Hardware prob.

[eliasps]

Δεν βλέπω κάτι στο dmesg, και η εσωτερική κάρτα γραφικών αναγνωρίζεται από τον πυρήνα αλλά είναι UNCLAIMED, δηλαδή δεν την διαχειρίζεται κάποιος οδηγός.
Έχεις συνδέσει εξωτερική κάρτα; Αυτή τη στιγμή τα γραφικά του υπολογιστή είναι εντάξει;

[the_eye]

Λογικά πρέπει να λειτουργεί σε vesa mode. Ειναι μια πολυ απλη λειτουργια αλλα μην περιμενεις πολλα και όσο αντέξει.

[Lionux]

Δεν βλέπω κάτι στο dmesg, και η εσωτερική κάρτα γραφικών αναγνωρίζεται από τον πυρήνα αλλά είναι UNCLAIMED, δηλαδή δεν την διαχειρίζεται κάποιος οδηγός.
Έχεις συνδέσει εξωτερική κάρτα; Αυτή τη στιγμή τα γραφικά του υπολογιστή είναι εντάξει;

Δεν εχω συνδεσει καμια εξωτερικη καρτα ! Τα γραφικα παιζουν περιεργως αψογα ! Μαλιστα προηγουμενως ειχα βαλει στον vlc βιντεο σχετικα υψηλης ποιοτητας κ το αναπαρηγαγε χωρις κανενα προβλημα ! Τρεχοντας kubuntu 12.04.2 μου εντοπισε πως η καρτα γραφικων ειναι ανενεργη κ μου προτεινε να εγκαταστησει καποιον οδηγο fglrx αν δεν κανω λαθος ! Πατησα οκ εκανε downloading αλλα μου εβγαλε μηνυμα πως δεν μπορουσε να συνεχισει στην εγκατασταση ! Αρα κατα πασα πιθανοτητα η εγγραφη που περασα στον grub βοηθησε να απενεργοποιηθει η καρτα γραφικων !

Λογικά πρέπει να λειτουργεί σε vesa mode. Ειναι μια πολυ απλη λειτουργια αλλα μην περιμενεις πολλα και όσο αντέξει.

Αν επιτρεπετε πως μπορω να το δω αυτο μεσα απο το τερματικο κ αν σου ειναι ευκολο μπορεις να μου πεις συνοπτικα τι ειναι ο vesa ? Επισης τι εννοεις οσο αντεξει ?

Ιδου κ ενα screenshot που τραβηξα απο το kubuntu με την εφαρμογη kinfocenter

[the_eye]

Αν επιτρεπετε πως μπορω να το δω αυτο μεσα απο το τερματικο

Φαίνεται στο τέλος του dmesg που παρέθεσες.

συνοπτικα τι ειναι ο vesa

Είναι μια τυπική λειτουργία απεικόνισης που έχουν η κάρτες. Για να μπορέσουν ακόμα και αν λείπει ο driver να δείξουν κάτι, έτσι ώστε να μπορεί να γίνει χειρισμός.
Πώς θα μπορούσαμε να βάλουμε drivers, αν η κάρτα δεν λειτουργούσε !

Επισης τι εννοεις οσο αντεξει ?

Είναι σίγουρο ότι η κάρτα έχει κάποιο ηλεκτρονικό πρόβλημα. Οπότε μπορεί να καεί ανά πάσα στιγμή.