προβλημα με ati/amd και κολλημα το συστημα

[fotioskats]

...και εγω αργησα ελειπα!!χααχαχχα!!!!

[Learner]

Οι θερμοκρασίες σου καλές φαίνονται . Το ότι ζεσταίνεται ίσως να οφείλεται και στον σκληρό..
Εγκατέστησε το hddtemp και τρέξε πάλι το sensors-detect

Κώδικας: Επιλογή όλων

sudo apt-get install hddtemp
sudo sensors-detect

στο πρώτο θα σε ρωτήσει αν θες να τρέχει ως daemon , πάτησε Yes (με το πλήκτρο Tab αλλάζεις μεταξύ των απαντήσεων) και τα υπόλοιπα άστα default (κενά).
Μετά εγκατέστησε ένα πρόγραμμα για θερμοκρασίες όπως είναι το psensor

Κώδικας: Επιλογή όλων

sudo apt-get install psensor

δεν ξέρω αν το jupiter δείχνει θερμοκρασίες σκληρού..
και κάνε μια επανεκκίνηση.

[sotos21]

Συγνώμη αλλά οι κλειστοί οδηγοί έχουν εγκατασταθεί σωστά, και οι θερμοκρασίες για την εποχή είναι πολύ καλές.
Τις πρώτες θερμοκρασίες που ανέβασες με το jupiter πρέπει να ήταν πριν την εγκατάσταση των κλειστών.

Edit Το jupiter να το έχεις στη λειτουργία ondemand όταν είσαι στο ρεύμα.

[fotioskats]

Κώδικας: Επιλογή όλων

nsors
acpitz-virtual-0
Adapter: Virtual device
temp1: +53.0°C (crit = +200.0°C)
temp2: +0.0°C (crit = +200.0°C)

k10temp-pci-00c3
Adapter: PCI adapter
temp1: +52.9°C (high = +70.0°C)
(crit = +100.0°C, hyst = +95.0°C)

Κώδικας: Επιλογή όλων

value min max
temp1 53 53 57
temp1 51 51 56
sda 48 48 48
cpu usg 28% 6% 100%

[sotos21]

Μια χαρά είσαι, μην ξεχνάς ότι η εξωτερική θερμοκρασία αυτή την στιγμή είναι 31 βαθμούς.

[fotioskats]

τοτε γιατι καποια στιγμη κολλανε ολα...ακομα και ο κερσορας???

[Learner]

Οι θερμοκρασίες σου , όπως λέει και ο Sotos , είναι μια χαρά.. μην το σκέφτεσαι καθόλου.

τοτε γιατι καποια στιγμη κολλανε ολα...ακομα και ο κερσορας???

Αυτό μπορεί να οφείλεται και κάπου αλλού..
Κοίτα λίγο το dmesg ή το .xsession-errors για να δεις σχετικές αναφορές.

[sotos21]

Πάντως δεν κολλάει από αυξημένη θερμοκρασία (θα σου έκλεινε αλλιώς).
Πες μου όταν το παθαίνεις αν είσαι σε unity (σε εμένα για παράδειγμα κολλάει σε classic gnome όταν είμαι με μπαταρία και τύχει να κάνω κλικ στο εικονίδιο της μπαταρίας-bug στο gnomen panel-)
Θυμάσαι αν γίνεται τυχαία ή μετά το άνοιγμα μιας τυχαίας ή συγκεκριμένης εφαρμογής;
Όταν το ξαναπάθεις, μπες πάλι και ανέβασε το .xsessions.old εδώ στο forum.
Eπίσης αν το πάθεις για δοκίμασε αν δουλεύει ο συνδιασμός ctrl-alt-f2, αν ναι γράψε το username,τον κωδικό σου και μετά ή killall και την εφαρμογή που σου κόλλησε το σύστημα π.χ.

Κώδικας: Επιλογή όλων

killall firefox

ή

Κώδικας: Επιλογή όλων

sudo lightdm restart

για να σε ξαναβγάλει στην οθόνη σύνδεσης.

Εdit Μήπως όταν κολλάει το σύστημα σου αναβοσβήνει το λαμπάκι του caps-lock;

[fotioskats]

Κώδικας: Επιλογή όλων

[ 0.285886] pci_bus 0000:01: resource 1 [mem 0x92200000-0x923fffff]
[ 0.285889] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.285892] pci_bus 0000:02: resource 0 [io 0x3000-0x6fff]
[ 0.285894] pci_bus 0000:02: resource 1 [mem 0x91200000-0x921fffff]
[ 0.285897] pci_bus 0000:02: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.285900] pci_bus 0000:08: resource 1 [mem 0x91100000-0x911fffff]
[ 0.285903] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.285905] pci_bus 0000:09: resource 1 [mem 0x91000000-0x910fffff]
[ 0.285908] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.285911] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.285913] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.285916] pci_bus 0000:0a: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.285918] pci_bus 0000:0a: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.285921] pci_bus 0000:0a: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.285924] pci_bus 0000:0a: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.285926] pci_bus 0000:0a: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.285929] pci_bus 0000:0a: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.285932] pci_bus 0000:0a: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.285934] pci_bus 0000:0a: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.285937] pci_bus 0000:0a: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.285939] pci_bus 0000:0a: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.285942] pci_bus 0000:0a: resource 17 [mem 0x000ec000-0x000effff]
[ 0.285945] pci_bus 0000:0a: resource 18 [mem 0x80000000-0xf6ffffff]
[ 0.285947] pci_bus 0000:0a: resource 19 [mem 0xf8000000-0xffffffff]
[ 0.285994] NET: Registered protocol family 2
[ 0.286112] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.286843] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.288512] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.288900] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.288903] TCP reno registered
[ 0.288918] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.288938] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.289036] NET: Registered protocol family 1
[ 0.289050] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.289081] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.380096] pci 0000:00:12.0: PCI INT A disabled
[ 0.380116] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.472134] pci 0000:00:12.1: PCI INT A disabled
[ 0.472154] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.488136] pci 0000:00:12.2: PCI INT B disabled
[ 0.488154] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.580124] pci 0000:00:13.0: PCI INT A disabled
[ 0.580142] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.672125] pci 0000:00:13.1: PCI INT A disabled
[ 0.672158] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.677886] Freeing initrd memory: 19928k freed
[ 0.688134] pci 0000:00:13.2: PCI INT B disabled
[ 0.688167] pci 0000:01:05.0: Boot video device
[ 0.688174] PCI: CLS 64 bytes, default 64
[ 0.689574] Simple Boot Flag at 0x44 set to 0x1
[ 0.689836] IBS: LVT offset 1 assigned
[ 0.689850] perf: AMD IBS detected (0x0000001f)
[ 0.690049] audit: initializing netlink socket (disabled)
[ 0.690067] type=2000 audit(1339514603.688:1): initialized
[ 0.718016] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.729347] VFS: Disk quotas dquot_6.5.2
[ 0.729407] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.730051] fuse init (API version 7.17)
[ 0.730220] msgmni has been set to 3488
[ 0.730803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.730906] io scheduler noop registered
[ 0.730911] io scheduler deadline registered
[ 0.730979] io scheduler cfq registered (default)
[ 0.731266] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.731298] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.731434] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.731458] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.731605] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.731630] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 0.731793] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.731823] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.733598] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.735553] ACPI: AC Adapter [AC] (off-line)
[ 0.735699] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.735705] ACPI: Power Button [PWRB]
[ 0.735744] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.735748] ACPI: Sleep Button [SLPB]
[ 0.735802] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.735859] ACPI: Lid Switch [LID]
[ 0.735897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.735900] ACPI: Power Button [PWRF]
[ 0.736065] ACPI: processor limited to max C-state 1
[ 0.758027] ACPI: Invalid active0 threshold
[ 0.760620] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.760624] ACPI: Thermal Zone [THRM] (59 C)
[ 0.762703] ACPI: Invalid active0 threshold
[ 0.763613] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.763617] ACPI: Thermal Zone [THR1] (0 C)
[ 0.763661] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.763682] ACPI: Battery Slot [BAT0] (battery present)
[ 0.763711] ERST: Table is not found!
[ 0.763712] GHES: HEST is not enabled!
[ 0.763823] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.829786] ACPI: Battery Slot [BAT0] (battery present)
[ 0.860912] Linux agpgart interface v0.103
[ 0.863365] brd: module loaded
[ 0.864710] loop: module loaded
[ 0.865025] ahci 0000:00:11.0: version 3.0
[ 0.865049] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.865099] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 0.865164] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.865168] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part ccc sxs
[ 0.865677] scsi0 : ahci
[ 0.865852] scsi1 : ahci
[ 0.865967] ata1: SATA max UDMA/133 abar m1024@0x92408000 port 0x92408100 irq 43
[ 0.865971] ata2: SATA max UDMA/133 abar m1024@0x92408000 port 0x92408180 irq 43
[ 0.866435] Fixed MDIO Bus: probed
[ 0.866455] tun: Universal TUN/TAP device driver, 1.6
[ 0.866457] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.866590] PPP generic driver version 2.4.2
[ 0.866828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.866917] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.866942] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 0.866946] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.867098] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.867151] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.867180] ehci_hcd 0000:00:12.2: debug port 1
[ 0.867205] ehci_hcd 0000:00:12.2: irq 17, io mem 0x92408500
[ 0.876110] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.876393] hub 1-0:1.0: USB hub found
[ 0.876399] hub 1-0:1.0: 6 ports detected
[ 0.876611] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.876632] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 0.876636] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.876730] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.876739] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.876761] ehci_hcd 0000:00:13.2: debug port 1
[ 0.876788] ehci_hcd 0000:00:13.2: irq 19, io mem 0x92408400
[ 0.888126] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.888308] hub 2-0:1.0: USB hub found
[ 0.888312] hub 2-0:1.0: 6 ports detected
[ 0.888517] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.888657] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.888683] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 0.888686] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.888797] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.888831] ohci_hcd 0000:00:12.0: irq 16, io mem 0x92407000
[ 0.948298] hub 3-0:1.0: USB hub found
[ 0.948336] hub 3-0:1.0: 3 ports detected
[ 0.948505] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.948527] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 0.948531] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.948619] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.948639] ohci_hcd 0000:00:12.1: irq 16, io mem 0x92406000
[ 1.008294] hub 4-0:1.0: USB hub found
[ 1.008335] hub 4-0:1.0: 3 ports detected
[ 1.008505] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.008527] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.008531] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.008653] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.008735] ohci_hcd 0000:00:13.0: irq 18, io mem 0x92405000
[ 1.068301] hub 5-0:1.0: USB hub found
[ 1.068333] hub 5-0:1.0: 3 ports detected
[ 1.068499] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.068521] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 1.068525] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.068610] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.068630] ohci_hcd 0000:00:13.1: irq 18, io mem 0x92404000
[ 1.128338] hub 6-0:1.0: USB hub found
[ 1.128362] hub 6-0:1.0: 3 ports detected
[ 1.128489] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.128572] usbcore: registered new interface driver libusual
[ 1.128611] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.144852] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.144858] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.145017] mousedev: PS/2 mouse device common for all mice
[ 1.146519] rtc_cmos 00:04: RTC can wake from S4
[ 1.146664] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.146691] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.146779] device-mapper: uevent: version 1.0.3
[ 1.146916] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.146924] cpuidle: using governor ladder
[ 1.146926] cpuidle: using governor menu
[ 1.146928] EFI Variables Facility v0.08 2004-May-17
[ 1.147151] TCP cubic registered
[ 1.147246] NET: Registered protocol family 10
[ 1.147720] NET: Registered protocol family 17
[ 1.147739] Registering the dns_resolver key type
[ 1.147941] PM: Hibernation image not present or could not be loaded.
[ 1.147953] registered taskstats version 1
[ 1.160564] Magic number: 0:315:386
[ 1.160576] usb usb4: hash matches
[ 1.160601] thermal cooling_device1: hash matches
[ 1.160721] rtc_cmos 00:04: setting system clock to 2012-06-12 15:23:24 UTC (1339514604)
[ 1.160730] powernow-k8: Found 1 AMD Athlon(tm) II Dual-Core M320 (2 cpu cores) (version 2.20.00)
[ 1.160761] powernow-k8: 0 : pstate 0 (2100 MHz)
[ 1.160763] powernow-k8: 1 : pstate 1 (1500 MHz)
[ 1.160765] powernow-k8: 2 : pstate 2 (800 MHz)
[ 1.160937] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.160941] EDD information not available.
[ 1.163961] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.200137] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 1.356085] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.360100] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.374328] ata2.00: ATAPI: Slimtype DVD A DS8A2L-A, 7H63, max UDMA/100
[ 1.388278] ata2.00: configured for UDMA/100
[ 1.403844] ata1.00: ATA-8: ST9250315AS, 0010LVM1, max UDMA/100
[ 1.403848] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.405879] ata1.00: configured for UDMA/100
[ 1.406140] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0010 PQ: 0 ANSI: 5
[ 1.406339] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.406366] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.406414] sd 0:0:0:0: [sda] Write Protect is off
[ 1.406417] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.406437] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.409282] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A2L-A 7H63 PQ: 0 ANSI: 5
[ 1.414041] sr0: scsi3-mmc drive: 24x/6x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 1.414046] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.414236] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.414351] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.419112] sda: sda1 sda2 sda3
[ 1.419756] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.421546] Freeing unused kernel memory: 920k freed
[ 1.421829] Write protecting the kernel read-only data: 12288k
[ 1.427940] Freeing unused kernel memory: 1608k freed
[ 1.433008] Freeing unused kernel memory: 1196k freed
[ 1.460115] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 1.460380] zram: num_devices not specified. Using default: 1
[ 1.460383] zram: Creating 1 devices ...
[ 1.465846] udevd[130]: starting version 175
[ 1.558258] atl1c 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.558272] atl1c 0000:09:00.0: setting latency timer to 64
[ 1.566939] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 1.579362] acpi device:03: registered as cooling_device2
[ 1.579477] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
[ 1.579531] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.587218] Adding 895028k swap on /dev/zram0. Priority:100 extents:1 across:895028k SS
[ 1.652655] atl1c 0000:09:00.0: version 1.0.1.0-NAPI
[ 1.692081] Refined TSC clocksource calibration: 2094.749 MHz.
[ 1.692088] Switching to clocksource tsc
[ 3.091201] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 3.091206] vesafb: scrolling: redraw
[ 3.091209] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 3.091699] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90001d80000, using 1536k, total 1536k
[ 3.091847] Console: switching to colour frame buffer device 128x48
[ 3.091868] fb0: VESA VGA frame buffer device
[ 3.306139] Btrfs loaded
[ 3.313753] xor: automatically using best checksumming function: generic_sse
[ 3.332086] generic_sse: 6880.000 MB/sec
[ 3.332089] xor: using function: generic_sse (6880.000 MB/sec)
[ 3.332708] device-mapper: dm-raid45: initialized v0.2594b
[ 3.647653] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.647658] EXT4-fs (sda2): write access will be enabled during recovery
[ 11.828267] EXT4-fs (sda2): recovery complete
[ 11.834436] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 13.946338] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.075991] Adding 4096536k swap on /dev/sda1. Priority:-1 extents:1 across:4096536k
[ 14.213860] udevd[436]: starting version 175
[ 15.317873] lp: driver loaded but no devices found
[ 15.745733] device-mapper: multipath: version 1.3.0 loaded
[ 15.811673] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6
[ 15.816142] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.860500] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 15.911863] MCE: In-kernel MCE decoding enabled.
[ 16.274322] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 16.274509] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 16.451088] EDAC MC: Ver: 2.1.0
[ 16.460663] AMD64 EDAC driver v3.4.0
[ 16.460819] EDAC amd64: DRAM ECC disabled.
[ 16.460828] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.460830] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.460831] (Note that use of the override may cause unknown side effects.)
[ 16.817988] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 16.826424] cfg80211: Calling CRDA to update world regulatory domain
[ 16.846039] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 17.522580] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.522592] ath9k 0000:08:00.0: setting latency timer to 64
[ 17.572515] ath: EEPROM regdomain: 0x6a
[ 17.572517] ath: EEPROM indicates we should expect a direct regpair map
[ 17.572521] ath: Country alpha2 being used: 00
[ 17.572522] ath: Regpair used: 0x6a
[ 17.572525] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572528] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572530] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572533] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572535] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572538] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572540] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572543] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572545] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572547] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572549] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572552] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572554] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572557] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572559] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572561] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572563] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572566] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572568] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572571] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572573] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572576] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572578] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572580] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572583] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.572585] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.572587] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 17.574224] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.598259] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 17.598853] Registered led device: ath9k-phy0
[ 17.598863] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000360000, irq=17
[ 17.893985] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 17.893990] Disabling lock debugging due to kernel taint
[ 17.921928] [fglrx] Maximum main memory to use for locked dma buffers: 1633 MBytes.
[ 17.922026] [fglrx] vendor: 1002 device: 9712 count: 1
[ 17.922562] [fglrx] ioport: bar 1, base 0x7000, size: 0x100
[ 17.922577] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 17.922582] pci 0000:01:05.0: setting latency timer to 64
[ 17.923048] [fglrx] Kernel PAT support is enabled
[ 17.923072] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 17.977623] type=1400 audit(1339514621.315:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=675 comm="apparmor_parser"
[ 17.977658] type=1400 audit(1339514621.315:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=607 comm="apparmor_parser"
[ 17.978170] type=1400 audit(1339514621.315:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=675 comm="apparmor_parser"
[ 17.978209] type=1400 audit(1339514621.315:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=607 comm="apparmor_parser"
[ 17.978487] type=1400 audit(1339514621.315:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=675 comm="apparmor_parser"
[ 17.978532] type=1400 audit(1339514621.315:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
[ 17.979239] type=1400 audit(1339514621.315:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
[ 17.979806] type=1400 audit(1339514621.315:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
[ 17.980151] type=1400 audit(1339514621.315:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[ 18.769804] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 18.778468] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.778474] cfg80211: World regulatory domain updated:
[ 18.778476] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.778479] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.778481] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.778484] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.778487] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.778489] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.921879] Linux video capture interface: v2.00
[ 18.945967] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0148)
[ 18.948838] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input9
[ 18.948934] usbcore: registered new interface driver uvcvideo
[ 18.948936] USB Video Class driver (1.1.1)
[ 19.037365] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.037458] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[ 19.119248] hda_codec: CX20585: BIOS auto-probing.
[ 19.121753] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 19.121919] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 19.913225] init: failsafe main process (1066) killed by TERM signal
[ 21.646368] type=1400 audit(1339514624.979:11): apparmor="STATUS" operation="profile_load" name="/opt/extras.ubuntu.com/unity-lens-askubuntu/unity-askubuntu-daemon" pid=1181 comm="apparmor_parser"
[ 22.378904] ppdev: user-space parallel port driver
[ 22.812224] Bluetooth: Core ver 2.16
[ 22.812256] NET: Registered protocol family 31
[ 22.812258] Bluetooth: HCI device and connection manager initialized
[ 22.812262] Bluetooth: HCI socket layer initialized
[ 22.812264] Bluetooth: L2CAP socket layer initialized
[ 22.812270] Bluetooth: SCO socket layer initialized
[ 22.869350] Bluetooth: RFCOMM TTY layer initialized
[ 22.869357] Bluetooth: RFCOMM socket layer initialized
[ 22.869359] Bluetooth: RFCOMM ver 1.11
[ 22.899966] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.899970] Bluetooth: BNEP filters: protocol multicast
[ 24.893252] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.896712] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.903647] atl1c 0000:09:00.0: irq 44 for MSI/MSI-X
[ 24.960679] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.961612] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.504174] [fglrx] ATIF platform detected with notification ID: 0x81
[ 27.593246] [fglrx] GART Table is not in FRAME_BUFFER range
[ 27.593565] [fglrx] Could not enable MSI; System prevented initialization
[ 27.594425] [fglrx] Firegl kernel thread PID: 1532
[ 27.594613] [fglrx] Firegl kernel thread PID: 1533
[ 27.594777] [fglrx] Firegl kernel thread PID: 1534
[ 27.594947] [fglrx] IRQ 18 Enabled
[ 27.896515] vboxdrv: Found 2 processor cores.
[ 27.897051] vboxdrv: fAsync=0 offMin=0x31f offMax=0x7ed
[ 27.897191] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 27.897194] vboxdrv: Successfully loaded version 4.1.16 (interface 0x00190000).
[ 28.053808] [fglrx] Gart USWC size:548 M.
[ 28.053860] [fglrx] Gart cacheable size:214 M.
[ 28.053864] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 28.053867] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 28.210192] wlan0: authenticate with 58:98:35:7a:83:e1 (try 1)
[ 28.212181] wlan0: authenticated
[ 28.212390] wlan0: associate with 58:98:35:7a:83:e1 (try 1)
[ 28.216555] wlan0: RX AssocResp from 58:98:35:7a:83:e1 (capab=0x411 status=0 aid=1)
[ 28.216559] wlan0: associated
[ 28.216952] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.382451] vboxpci: IOMMU not found (not registered)
[ 35.456634] init: plymouth-stop pre-start process (1972) terminated with status 1
[ 38.848014] wlan0: no IPv6 routers present
[ 70.775746] audit_printk_skb: 60 callbacks suppressed
[ 70.775758] type=1400 audit(1339514674.108:32): apparmor="DENIED" operation="open" parent=2668 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=2669 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 86.309061] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0x40c0002 action 0xe frozen
[ 86.309073] ata1.00: irq_stat 0x00000040, connection status changed
[ 86.309083] ata1: SError: { RecovComm CommWake 10B8B DevExch }
[ 86.309095] ata1.00: failed command: READ FPDMA QUEUED
[ 86.309110] ata1.00: cmd 60/00:00:7e:12:79/01:00:02:00:00/40 tag 0 ncq 131072 in
[ 86.309114] res 40/00:10:de:73:8a/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[ 86.309121] ata1.00: status: { DRDY }
[ 86.309136] ata1: hard resetting link
[ 87.208245] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 87.259792] ata1.00: configured for UDMA/100
[ 87.260176] ata1: EH complete
[ 2082.637206] NMI watchdog enabled, takes one hw-pmu counter.
[ 2082.637273] NMI watchdog enabled, takes one hw-pmu counter.


το xsession δεν παιζει..μου το κανει τις περισσοτερες φορες με το firefox or chrome
oxi δεν αναβοσβηνει

[fkol k4]

Βλέπω

Κώδικας: Επιλογή όλων

[ 86.309095] ata1.00: failed command: READ FPDMA QUEUED
[ 86.309114] res 40/00:10:de:73:8a/00:00:02:00:00/40 Emask 0x10 (ATA bus error)

Ίσως να μην είναι αυτό, αλλά δεν κάνεις καλού κακού έναν έλεγχο στο δίσκο σου;