από Learner » 21 Ιουν 2012, 14:16
BHacker έγραψε:αλλά κολλάω εδώ:
To allow you to use Bumblebee (replace $user with your username)
sudo usermod -a -G bumblebee steladlspci -nnk | grep -iA2 vga
από BHacker » 23 Ιουν 2012, 02:16
~$ lspci -nnk | grep -iA2 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
Subsystem: Acer Incorporated [ALI] Device [1025:0504]
Kernel driver in use: i915
--
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev ff)
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10)
Subsystem: Acer Incorporated [ALI] Device [1025:0504]
από Learner » 23 Ιουν 2012, 02:22
lspci -nnk | grep -iA2 vgaapt-cache policy nvidia-currentαπό BHacker » 23 Ιουν 2012, 03:18
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
Subsystem: Acer Incorporated [ALI] Device [1025:0504]
Kernel driver in use: i915
--
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev ff)
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10)
Subsystem: Acer Incorporated [ALI] Device [1025:0504]
stelad@stelad-Aspire-5750G:~$ apt-cache policy nvidia-current
nvidia-current:
Installed: 302.17-0ubuntu1~precise~xup1
Candidate: 302.17-0ubuntu1~precise~xup1
Version table:
*** 302.17-0ubuntu1~precise~xup1 0
500 http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu/ precise/main i386 Packages
100 /var/lib/dpkg/status
295.40-0ubuntu1 0
500 http://gr.archive.ubuntu.com/ubuntu/ precise/restricted i386 Packages
από Learner » 23 Ιουν 2012, 05:47
apt-cache policy ironhidesudo apt-get purge ironhide
sudo add-apt-repository --remove ppa:mj-casalogic/ironhide
sudo apt-get update ; sudo apt-get upgrade dmesg > dmesg.txt
gedit dmesg.txtecho $DESKTOP_SESSIONαπό BHacker » 23 Ιουν 2012, 14:36
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-25-generic-pae (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40-Ubuntu SMP Wed May 23 22:11:24 UTC 2012 (Ubuntu 3.2.0-25.40-generic-pae 3.2.18)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000096e3f000 (usable)
[ 0.000000] BIOS-e820: 0000000096e3f000 - 0000000096ebf000 (reserved)
[ 0.000000] BIOS-e820: 0000000096ebf000 - 0000000096fbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000096fbf000 - 0000000096fff000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000096fff000 - 0000000097000000 (usable)
[ 0.000000] BIOS-e820: 0000000097000000 - 000000009fa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000015fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Acer Aspire 5750G/JE50_HR, BIOS V1.07 03/02/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x15fe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 097000000 mask FFF000000 uncachable
[ 0.000000] 3 base 098000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 140000000 mask FF0000000 write-back
[ 0.000000] 7 base 150000000 mask FF0000000 write-back
[ 0.000000] 8 base 15FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[ 0.000000] RAMDISK: 36500000 - 37278000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 96ffe120 00084 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 96ffc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 96ff0000 08EF7 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 96f6d000 00040
[ 0.000000] ACPI: ASF! 96ffd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 96ffb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 96ffa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 96ff9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 96fef000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 96fee000 00BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 96fec000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 96fe9000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 96fe8000 0090C (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 96fe7000 00996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 96fe2000 04F58 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4738MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0015fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00096e3f
[ 0.000000] 0: 0x00096fff -> 0x00097000
[ 0.000000] 0: 0x00100000 -> 0x0015fe00
[ 0.000000] On node 0 totalpages: 1010637
[ 0.000000] free_area_init_node: node 0, pgdat c186d440, node_mem_map f3900200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 9477 pages used for memmap
[ 0.000000] HighMem zone: 772925 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7b7b000 s34240 r0 d23104 u57344
[ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999376
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic-pae root=UUID=ed0648e6-f11b-40e9-ac53-d84641910fac ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 23060224 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0015fe00)
[ 0.000000] Memory: 3949468k/5765120k available (5828k kernel code, 93080k reserved, 2854k data, 740k init, 3129608k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc187b000 - 0xc1934000 ( 740 kB)
[ 0.000000] .data : 0xc15b1264 - 0xc187ad00 (2854 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15b1264 (5828 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1995.567 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.13 BogoMIPS (lpj=7982268)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000029] Security Framework initialized
[ 0.000043] AppArmor: AppArmor initialized
[ 0.000044] Yama: becoming mindful.
[ 0.000092] Mount-cache hash table entries: 512
[ 0.000210] Initializing cgroup subsys cpuacct
[ 0.000216] Initializing cgroup subsys memory
[ 0.000224] Initializing cgroup subsys devices
[ 0.000226] Initializing cgroup subsys freezer
[ 0.000228] Initializing cgroup subsys blkio
[ 0.000233] Initializing cgroup subsys perf_event
[ 0.000259] CPU: Physical Processor ID: 0
[ 0.000261] CPU: Processor Core ID: 0
[ 0.000266] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000267] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000270] mce: CPU supports 9 MCE banks
[ 0.000285] CPU0: Thermal monitoring enabled (TM1)
[ 0.000292] using mwait in idle threads.
[ 0.002816] ACPI: Core revision 20110623
[ 0.045325] ftrace: allocating 26619 entries in 53 pages
[ 0.056653] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.057116] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.096790] CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz stepping 07
[ 0.203500] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.203506] PEBS disabled due to CPU errata.
[ 0.203508] ... version: 3
[ 0.203510] ... bit width: 48
[ 0.203511] ... generic registers: 4
[ 0.203513] ... value mask: 0000ffffffffffff
[ 0.203514] ... max period: 000000007fffffff
[ 0.203516] ... fixed-purpose events: 3
[ 0.203517] ... event mask: 000000070000000f
[ 0.203677] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203756] CPU 1 irqstacks, hard=f7558000 soft=f755a000
[ 0.203758] Booting Node 0, Processors #1
[ 0.203760] smpboot cpu 1: start_ip = 99000
[ 0.214207] Initializing CPU#1
[ 0.311608] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.311694] CPU 2 irqstacks, hard=f7566000 soft=f7568000
[ 0.311696] #2
[ 0.311698] smpboot cpu 2: start_ip = 99000
[ 0.321944] Initializing CPU#2
[ 0.335455] calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=4281922924 >=post_end=2919276
[ 0.419526] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.419610] CPU 3 irqstacks, hard=f759c000 soft=f759e000
[ 0.419612] #3
[ 0.419613] smpboot cpu 3: start_ip = 99000
[ 0.429957] Initializing CPU#3
[ 0.527541] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.527622] CPU 4 irqstacks, hard=f75b6000 soft=f75b8000
[ 0.527624] #4
[ 0.527625] smpboot cpu 4: start_ip = 99000
[ 0.537970] Initializing CPU#4
[ 0.635449] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.635532] CPU 5 irqstacks, hard=f75d4000 soft=f75d6000
[ 0.635534] #5
[ 0.635535] smpboot cpu 5: start_ip = 99000
[ 0.645879] Initializing CPU#5
[ 0.743459] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.743536] CPU 6 irqstacks, hard=f75e2000 soft=f75e4000
[ 0.743538] #6
[ 0.743539] smpboot cpu 6: start_ip = 99000
[ 0.753884] Initializing CPU#6
[ 0.851364] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.851448] CPU 7 irqstacks, hard=f75f8000 soft=f75fa000
[ 0.851450] #7 Ok.
[ 0.851451] smpboot cpu 7: start_ip = 99000
[ 0.861795] Initializing CPU#7
[ 0.959375] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.959404] Brought up 8 CPUs
[ 0.959407] Total of 8 processors activated (31927.57 BogoMIPS).
[ 0.968491] devtmpfs: initialized
[ 0.968613] EVM: security.selinux
[ 0.968614] EVM: security.SMACK64
[ 0.968616] EVM: security.capability
[ 0.968639] PM: Registering ACPI NVS region at 96ebf000 (1048576 bytes)
[ 0.969685] print_constraints: dummy:
[ 0.969726] RTC time: 11:33:50, date: 06/23/12
[ 0.969765] NET: Registered protocol family 16
[ 0.969864] Trying to unpack rootfs image as initramfs...
[ 0.969869] EISA bus registered
[ 0.969886] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.969888] ACPI: bus type pci registered
[ 0.969961] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.969964] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.969966] PCI: Using MMCONFIG for extended config space
[ 0.969968] PCI: Using configuration type 1 for base access
[ 0.971006] bio: create slab <bio-0> at 0
[ 0.971083] ACPI: Added _OSI(Module Device)
[ 0.971085] ACPI: Added _OSI(Processor Device)
[ 0.971087] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.971089] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.973248] ACPI: EC: Look up EC in DSDT
[ 0.975346] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.031316] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.032587] ACPI: SSDT 96e70718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 1.033130] ACPI: Dynamic OEM Table Load:
[ 1.033133] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 1.063504] ACPI: SSDT 96e71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 1.064091] ACPI: Dynamic OEM Table Load:
[ 1.064093] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 1.095317] ACPI: SSDT 96e6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 1.095859] ACPI: Dynamic OEM Table Load:
[ 1.095862] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 1.159245] ACPI: Interpreter enabled
[ 1.159252] ACPI: (supports S0 S3 S4 S5)
[ 1.159282] ACPI: Using IOAPIC for interrupt routing
[ 1.243258] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.243469] ACPI: No dock devices found.
[ 1.243471] HEST: Table not found.
[ 1.243475] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.243842] \_SB_.PCI0:_OSC invalid UUID
[ 1.243844] _OSC request data:1 8 1f
[ 1.243849] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.244449] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.244452] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.244455] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.244459] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
[ 1.244471] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 1.244516] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 1.244556] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.244559] pci 0000:00:01.0: PME# disabled
[ 1.244586] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[ 1.244599] pci 0000:00:02.0: reg 10: [mem 0xd1400000-0xd17fffff 64bit]
[ 1.244607] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.244612] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
[ 1.244696] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 1.244732] pci 0000:00:16.0: reg 10: [mem 0xd1b04000-0xd1b0400f 64bit]
[ 1.244853] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.244859] pci 0000:00:16.0: PME# disabled
[ 1.244912] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 1.245329] pci 0000:00:1a.0: reg 10: [mem 0xd1b0a000-0xd1b0a3ff]
[ 1.247728] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.247733] pci 0000:00:1a.0: PME# disabled
[ 1.247772] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 1.247800] pci 0000:00:1b.0: reg 10: [mem 0xd1b00000-0xd1b03fff 64bit]
[ 1.247930] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.247935] pci 0000:00:1b.0: PME# disabled
[ 1.247970] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 1.248107] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.248112] pci 0000:00:1c.0: PME# disabled
[ 1.248150] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 1.248287] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.248292] pci 0000:00:1c.1: PME# disabled
[ 1.248331] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 1.248468] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.248473] pci 0000:00:1c.3: PME# disabled
[ 1.248523] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 1.248933] pci 0000:00:1d.0: reg 10: [mem 0xd1b09000-0xd1b093ff]
[ 1.251337] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.251343] pci 0000:00:1d.0: PME# disabled
[ 1.251376] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[ 1.251563] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 1.251599] pci 0000:00:1f.2: reg 10: [io 0x3098-0x309f]
[ 1.251614] pci 0000:00:1f.2: reg 14: [io 0x30bc-0x30bf]
[ 1.251629] pci 0000:00:1f.2: reg 18: [io 0x3090-0x3097]
[ 1.251644] pci 0000:00:1f.2: reg 1c: [io 0x30b8-0x30bb]
[ 1.251658] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
[ 1.251673] pci 0000:00:1f.2: reg 24: [mem 0xd1b08000-0xd1b087ff]
[ 1.251764] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.251769] pci 0000:00:1f.2: PME# disabled
[ 1.251799] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 1.251826] pci 0000:00:1f.3: reg 10: [mem 0xd1b06000-0xd1b060ff 64bit]
[ 1.251866] pci 0000:00:1f.3: reg 20: [io 0x3040-0x305f]
[ 1.251953] pci 0000:01:00.0: [10de:0df4] type 0 class 0x000300
[ 1.251966] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff]
[ 1.251981] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.251995] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 1.252005] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 1.252015] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 1.259166] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.259169] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 1.259172] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff]
[ 1.259177] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.259324] pci 0000:02:00.0: [14e4:16b5] type 0 class 0x000200
[ 1.259363] pci 0000:02:00.0: reg 10: [mem 0xd1830000-0xd183ffff 64bit pref]
[ 1.259393] pci 0000:02:00.0: reg 18: [mem 0xd1840000-0xd184ffff 64bit pref]
[ 1.259450] pci 0000:02:00.0: reg 30: [mem 0xfffff800-0xffffffff pref]
[ 1.259558] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.259565] pci 0000:02:00.0: PME# disabled
[ 1.259643] pci 0000:02:00.1: [14e4:16bc] type 0 class 0x000805
[ 1.259681] pci 0000:02:00.1: reg 10: [mem 0xd1800000-0xd180ffff 64bit pref]
[ 1.259865] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 1.259872] pci 0000:02:00.1: PME# disabled
[ 1.259933] pci 0000:02:00.2: [14e4:16be] type 0 class 0x000880
[ 1.259972] pci 0000:02:00.2: reg 10: [mem 0xd1810000-0xd181ffff 64bit pref]
[ 1.260156] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 1.260163] pci 0000:02:00.2: PME# disabled
[ 1.260224] pci 0000:02:00.3: [14e4:16bf] type 0 class 0x000880
[ 1.260262] pci 0000:02:00.3: reg 10: [mem 0xd1820000-0xd182ffff 64bit pref]
[ 1.260446] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[ 1.260453] pci 0000:02:00.3: PME# disabled
[ 1.267230] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.267246] pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd18fffff 64bit pref]
[ 1.267352] pci 0000:03:00.0: [168c:002e] type 0 class 0x000280
[ 1.267389] pci 0000:03:00.0: reg 10: [mem 0xd1a00000-0xd1a0ffff 64bit]
[ 1.267564] pci 0000:03:00.0: supports D1
[ 1.267566] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 1.267573] pci 0000:03:00.0: PME# disabled
[ 1.275165] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.275174] pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1afffff]
[ 1.275366] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[ 1.275431] pci 0000:05:00.0: reg 10: [mem 0xd1900000-0xd1901fff 64bit]
[ 1.275778] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 1.275794] pci 0000:05:00.0: PME# disabled
[ 1.283221] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 1.283230] pci 0000:00:1c.3: bridge window [mem 0xd1900000-0xd19fffff]
[ 1.283266] pci_bus 0000:00: on NUMA node 0
[ 1.283271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.283459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.283498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.283536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.283595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 1.283680] \_SB_.PCI0:_OSC invalid UUID
[ 1.283682] _OSC request data:1 1f 1f
[ 1.283687] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.283723] \_SB_.PCI0:_OSC invalid UUID
[ 1.283724] _OSC request data:1 0 1d
[ 1.283728] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.283730] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.285819] Freeing initrd memory: 13792k freed
[ 1.288038] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.288094] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.288147] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.288198] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.288250] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.288302] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.288353] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.288403] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.288522] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.288532] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.288537] vgaarb: loaded
[ 1.288538] vgaarb: bridge control possible 0000:01:00.0
[ 1.288539] vgaarb: no bridge control possible 0000:00:02.0
[ 1.288643] i2c-core: driver [aat2870] using legacy suspend method
[ 1.288644] i2c-core: driver [aat2870] using legacy resume method
[ 1.288720] SCSI subsystem initialized
[ 1.288764] libata version 3.00 loaded.
[ 1.288807] usbcore: registered new interface driver usbfs
[ 1.288817] usbcore: registered new interface driver hub
[ 1.288837] usbcore: registered new device driver usb
[ 1.288920] PCI: Using ACPI for IRQ routing
[ 1.302588] PCI: pci_cache_line_size set to 64 bytes
[ 1.302819] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 1.302822] reserve RAM buffer: 0000000096e3f000 - 0000000097ffffff
[ 1.302825] reserve RAM buffer: 0000000097000000 - 0000000097ffffff
[ 1.302827] reserve RAM buffer: 000000015fe00000 - 000000015fffffff
[ 1.302922] NetLabel: Initializing
[ 1.302924] NetLabel: domain hash size = 128
[ 1.302925] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.302935] NetLabel: unlabeled traffic allowed by default
[ 1.302981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.302989] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.306012] Switching to clocksource hpet
[ 1.313194] AppArmor: AppArmor Filesystem Enabled
[ 1.313210] pnp: PnP ACPI init
[ 1.313223] ACPI: bus type pnp registered
[ 1.313553] pnp 00:00: [bus 00-fe]
[ 1.313556] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.313558] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.313560] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.313563] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.313565] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.313567] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.313569] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.313572] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.313574] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.313576] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.313578] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.313580] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.313583] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.313585] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.313587] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.313589] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.313591] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.313594] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[ 1.313656] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.313671] pnp 00:01: [io 0x0000-0x001f]
[ 1.313673] pnp 00:01: [io 0x0081-0x0091]
[ 1.313675] pnp 00:01: [io 0x0093-0x009f]
[ 1.313677] pnp 00:01: [io 0x00c0-0x00df]
[ 1.313679] pnp 00:01: [dma 4]
[ 1.313703] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.313711] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.313734] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.313809] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.313834] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.313845] pnp 00:04: [io 0x00f0]
[ 1.313854] pnp 00:04: [irq 13]
[ 1.313877] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.313889] pnp 00:05: [io 0x002e-0x002f]
[ 1.313891] pnp 00:05: [io 0x004e-0x004f]
[ 1.313893] pnp 00:05: [io 0x0061]
[ 1.313895] pnp 00:05: [io 0x0063]
[ 1.313897] pnp 00:05: [io 0x0065]
[ 1.313898] pnp 00:05: [io 0x0067]
[ 1.313900] pnp 00:05: [io 0x0068]
[ 1.313902] pnp 00:05: [io 0x006c]
[ 1.313903] pnp 00:05: [io 0x0070]
[ 1.313905] pnp 00:05: [io 0x0080]
[ 1.313907] pnp 00:05: [io 0x0092]
[ 1.313909] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.313911] pnp 00:05: [io 0x0680-0x069f]
[ 1.313913] pnp 00:05: [io 0xff2c-0xff2f]
[ 1.313914] pnp 00:05: [io 0x1000-0x100f]
[ 1.313916] pnp 00:05: [io 0xffff]
[ 1.313918] pnp 00:05: [io 0xffff]
[ 1.313921] pnp 00:05: [io 0x0400-0x047f]
[ 1.313923] pnp 00:05: [io 0x0500-0x057f]
[ 1.313925] pnp 00:05: [io 0x164e-0x164f]
[ 1.313985] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.313988] system 00:05: [io 0xff2c-0xff2f] has been reserved
[ 1.313990] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.313993] system 00:05: [io 0xffff] has been reserved
[ 1.313995] system 00:05: [io 0xffff] has been reserved
[ 1.313998] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.314000] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.314002] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.314006] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.314014] pnp 00:06: [io 0x0070-0x0077]
[ 1.314020] pnp 00:06: [irq 8]
[ 1.314045] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.314066] pnp 00:07: [io 0x0454-0x0457]
[ 1.314106] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.314109] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.314128] pnp 00:08: [io 0x0060]
[ 1.314130] pnp 00:08: [io 0x0064]
[ 1.314135] pnp 00:08: [irq 1]
[ 1.314162] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.314206] pnp 00:09: [irq 12]
[ 1.314234] pnp 00:09: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
[ 1.354162] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 1.354164] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 1.354166] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 1.354169] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 1.354171] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 1.354173] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 1.354175] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 1.354177] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 1.354179] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 1.354181] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
[ 1.354235] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.354238] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.354240] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.354243] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.354246] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.354248] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.354251] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.354254] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.354256] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.354259] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 1.354262] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.354495] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 1.354497] pnp 00:0b: [mem 0x40000000-0x401fffff]
[ 1.354563] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[ 1.354566] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
[ 1.354569] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.354588] pnp: PnP ACPI: found 12 devices
[ 1.354589] ACPI: ACPI bus type pnp unregistered
[ 1.354592] PnPBIOS: Disabled by ACPI PNP
[ 1.391305] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 1.391308] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
[ 1.391313] PCI: max bus depth: 1 pci_try_num: 2
[ 1.391361] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff]
[ 1.391364] pci 0000:01:00.0: BAR 6: assigned [mem 0xd1000000-0xd107ffff pref]
[ 1.391367] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.391370] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 1.391374] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff]
[ 1.391377] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.391383] pci 0000:02:00.0: BAR 6: assigned [mem 0xd1850000-0xd18507ff pref]
[ 1.391385] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.391392] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff]
[ 1.391398] pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd18fffff 64bit pref]
[ 1.391408] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.391415] pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1afffff]
[ 1.391428] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 1.391435] pci 0000:00:1c.3: bridge window [mem 0xd1900000-0xd19fffff]
[ 1.391460] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.391464] pci 0000:00:01.0: setting latency timer to 64
[ 1.391475] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.391481] pci 0000:00:1c.0: setting latency timer to 64
[ 1.391489] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.391495] pci 0000:00:1c.1: setting latency timer to 64
[ 1.391508] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.391513] pci 0000:00:1c.3: setting latency timer to 64
[ 1.391518] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.391520] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.391522] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.391525] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 1.391527] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.391529] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd10fffff]
[ 1.391532] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.391534] pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fbfffff]
[ 1.391537] pci_bus 0000:02: resource 2 [mem 0xd1800000-0xd18fffff 64bit pref]
[ 1.391539] pci_bus 0000:03: resource 1 [mem 0xd1a00000-0xd1afffff]
[ 1.391541] pci_bus 0000:05: resource 1 [mem 0xd1900000-0xd19fffff]
[ 1.391572] NET: Registered protocol family 2
[ 1.391625] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.391772] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.392016] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.392119] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.392121] TCP reno registered
[ 1.392124] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.392129] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.392188] NET: Registered protocol family 1
[ 1.392200] pci 0000:00:02.0: Boot video device
[ 1.392212] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.405980] pci 0000:00:1a.0: PCI INT A disabled
[ 1.406030] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.421965] pci 0000:00:1d.0: PCI INT A disabled
[ 1.422173] pci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.424327] pci 0000:05:00.0: PCI INT A disabled
[ 1.424333] PCI: CLS 64 bytes, default 64
[ 1.424340] Simple Boot Flag at 0x44 set to 0x1
[ 1.425028] audit: initializing netlink socket (disabled)
[ 1.425036] type=2000 audit(1340451230.156:1): initialized
[ 1.453124] highmem bounce pool size: 64 pages
[ 1.453129] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.459556] VFS: Disk quotas dquot_6.5.2
[ 1.459623] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.460137] fuse init (API version 7.17)
[ 1.460230] msgmni has been set to 1628
[ 1.460614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.460643] io scheduler noop registered
[ 1.460645] io scheduler deadline registered
[ 1.460651] io scheduler cfq registered (default)
[ 1.460749] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.460779] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.461053] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.461081] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.461138] intel_idle: MWAIT substates: 0x21120
[ 1.461140] intel_idle: v0.4 model 0x2A
[ 1.461141] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.657894] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.857845] ACPI: AC Adapter [ACAD] (on-line)
[ 1.857977] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[ 1.857982] ACPI: Power Button [PWRB]
[ 1.858026] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
[ 1.858045] ACPI: Lid Switch [LID0]
[ 1.858086] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[ 1.858090] ACPI: Sleep Button [SLPB]
[ 1.858135] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.858138] ACPI: Power Button [PWRF]
[ 1.899003] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.899011] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.899040] ERST: Table is not found!
[ 1.899042] GHES: HEST is not enabled!
[ 1.899103] isapnp: Scanning for PnP cards...
[ 1.899116] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.937778] ACPI: Battery Slot [BAT0] (battery absent)
[ 2.252988] isapnp: No Plug & Play device found
[ 2.274311] Linux agpgart interface v0.103
[ 2.274420] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 2.274479] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.275718] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 2.275845] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 2.277371] brd: module loaded
[ 2.278156] loop: module loaded
[ 2.278282] ahci 0000:00:1f.2: version 3.0
[ 2.278295] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.278356] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.278389] ahci: SSS flag set, parallel bus scan disabled
[ 2.278419] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 2.278423] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 2.278429] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.286247] scsi0 : ahci
[ 2.286334] scsi1 : ahci
[ 2.286410] scsi2 : ahci
[ 2.286482] scsi3 : ahci
[ 2.286554] scsi4 : ahci
[ 2.286623] scsi5 : ahci
[ 2.286728] ata1: SATA max UDMA/133 abar m2048@0xd1b08000 port 0xd1b08100 irq 41
[ 2.286732] ata2: SATA max UDMA/133 abar m2048@0xd1b08000 port 0xd1b08180 irq 41
[ 2.286734] ata3: DUMMY
[ 2.286736] ata4: DUMMY
[ 2.286737] ata5: DUMMY
[ 2.286738] ata6: DUMMY
[ 2.287111] Fixed MDIO Bus: probed
[ 2.287129] tun: Universal TUN/TAP device driver, 1.6
[ 2.287131] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.287176] PPP generic driver version 2.4.2
[ 2.287268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.287283] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.287298] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.287302] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.287347] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.287375] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.291257] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.291273] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd1b0a000
[ 2.305676] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.305863] hub 1-0:1.0: USB hub found
[ 2.305868] hub 1-0:1.0: 2 ports detected
[ 2.305930] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.305945] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.305949] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.305993] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.306020] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.309898] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.309913] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd1b09000
[ 2.325669] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.325838] hub 2-0:1.0: USB hub found
[ 2.325842] hub 2-0:1.0: 2 ports detected
[ 2.325901] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.325913] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.325949] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.325970] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 2.325976] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 2.326019] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 2.326221] xhci_hcd 0000:05:00.0: irq 19, io mem 0xd1900000
[ 2.326337] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
[ 2.326346] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
[ 2.326352] xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X
[ 2.326358] xhci_hcd 0000:05:00.0: irq 45 for MSI/MSI-X
[ 2.326364] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
[ 2.326371] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X
[ 2.326376] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
[ 2.326383] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 2.326607] xHCI xhci_add_endpoint called for root hub
[ 2.326609] xHCI xhci_check_bandwidth called for root hub
[ 2.326635] hub 3-0:1.0: USB hub found
[ 2.326644] hub 3-0:1.0: 2 ports detected
[ 2.326708] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 2.326750] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[ 2.329682] xHCI xhci_add_endpoint called for root hub
[ 2.329684] xHCI xhci_check_bandwidth called for root hub
[ 2.329707] hub 4-0:1.0: USB hub found
[ 2.329715] hub 4-0:1.0: 2 ports detected
[ 2.373727] usbcore: registered new interface driver libusual
[ 2.373800] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 2.421630] Refined TSC clocksource calibration: 1995.467 MHz.
[ 2.421634] Switching to clocksource tsc
[ 2.431300] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.431306] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.431425] mousedev: PS/2 mouse device common for all mice
[ 2.431594] rtc_cmos 00:06: RTC can wake from S4
[ 2.431724] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.431761] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.431817] device-mapper: uevent: version 1.0.3
[ 2.431881] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.431911] EISA: Probing bus 0 at eisa.0
[ 2.431913] EISA: Cannot allocate resource for mainboard
[ 2.431915] Cannot allocate resource for EISA slot 1
[ 2.431917] Cannot allocate resource for EISA slot 2
[ 2.431918] Cannot allocate resource for EISA slot 3
[ 2.431920] Cannot allocate resource for EISA slot 4
[ 2.431922] Cannot allocate resource for EISA slot 5
[ 2.431923] Cannot allocate resource for EISA slot 6
[ 2.431925] Cannot allocate resource for EISA slot 7
[ 2.431927] Cannot allocate resource for EISA slot 8
[ 2.431928] EISA: Detected 0 cards.
[ 2.431936] cpufreq-nforce2: No nForce2 chipset.
[ 2.432197] cpuidle: using governor ladder
[ 2.436134] cpuidle: using governor menu
[ 2.436136] EFI Variables Facility v0.08 2004-May-17
[ 2.436325] TCP cubic registered
[ 2.436438] NET: Registered protocol family 10
[ 2.436865] NET: Registered protocol family 17
[ 2.436879] Registering the dns_resolver key type
[ 2.436900] Using IPI No-Shortcut mode
[ 2.437002] PM: Hibernation image not present or could not be loaded.
[ 2.437012] registered taskstats version 1
[ 2.447188] Magic number: 0:922:580
[ 2.447223] pci_bus 0000:01: hash matches
[ 2.447309] rtc_cmos 00:06: setting system clock to 2012-06-23 11:33:52 UTC (1340451232)
[ 2.448822] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.448824] EDD information not available.
[ 2.491446] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.605666] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.633648] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.636292] ata1.00: ATA-8: TOSHIBA MK7559GSXP, GN003J, max UDMA/100
[ 2.636302] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.637330] ata1.00: configured for UDMA/100
[ 2.637604] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK7559GS GN00 PQ: 0 ANSI: 5
[ 2.637816] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.637823] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.637834] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.638027] sd 0:0:0:0: [sda] Write Protect is off
[ 2.638030] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.638148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.718590] sda: sda1 sda2 < sda5 >
[ 2.719501] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.766465] hub 1-1:1.0: USB hub found
[ 2.766605] hub 1-1:1.0: 6 ports detected
[ 2.877588] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.957565] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.972733] ata2.00: ATAPI: PIONEER DVD-RW DVRTD10RS, 1.00, max UDMA/100
[ 2.985728] ata2.00: configured for UDMA/100
[ 2.997417] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVRTD10RS 1.00 PQ: 0 ANSI: 5
[ 3.010336] hub 2-1:1.0: USB hub found
[ 3.010527] hub 2-1:1.0: 6 ports detected
[ 3.012595] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.012604] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.012860] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.012957] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.013455] Freeing unused kernel memory: 740k freed
[ 3.013679] Write protecting the kernel text: 5832k
[ 3.013738] Write protecting the kernel read-only data: 2380k
[ 3.013739] NX-protecting the kernel data: 4408k
[ 3.027035] udevd[123]: starting version 175
[ 3.081655] usb 1-1.3: new high-speed USB device number 3 using ehci_hcd
[ 3.309527] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd
[ 3.426192] Initializing USB Mass Storage driver...
[ 3.426439] scsi6 : usb-storage 2-1.2:1.0
[ 3.426496] usbcore: registered new interface driver usb-storage
[ 3.426498] USB Mass Storage support registered.
[ 3.441930] sdhci: Secure Digital Host Controller Interface driver
[ 3.441933] sdhci: Copyright(c) Pierre Ossman
[ 3.442480] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[ 3.442537] sdhci-pci 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.442540] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems.
[ 3.442623] sdhci-pci 0000:02:00.1: setting latency timer to 64
[ 3.442647] mmc0: no vmmc regulator found
[ 3.442837] Registered led device: mmc0::
[ 3.443914] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
[ 3.443975] tg3.c:v3.121 (November 2, 2011)
[ 3.444026] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.444077] tg3 0000:02:00.0: setting latency timer to 64
[ 3.488419] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 1c:75:08:f4:76:26
[ 3.488422] tg3 0000:02:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 3.488424] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.488426] tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 3.497465] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[ 3.595902] scsi7 : usb-storage 2-1.4:1.0
[ 4.435286] scsi 6:0:0:0: Direct-Access SAMSUNG HD154UI PQ: 0 ANSI: 2
[ 4.435874] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 4.436794] sd 6:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.439330] sd 6:0:0:0: [sdb] Write Protect is off
[ 4.439333] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 4.441824] sd 6:0:0:0: [sdb] No Caching mode page present
[ 4.441827] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.448057] sd 6:0:0:0: [sdb] No Caching mode page present
[ 4.448059] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.595899] scsi 7:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4
[ 4.596558] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 4.597397] sd 7:0:0:0: [sdc] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 4.599398] sd 7:0:0:0: [sdc] Write Protect is off
[ 4.599401] sd 7:0:0:0: [sdc] Mode Sense: 17 00 10 08
[ 4.601430] sd 7:0:0:0: [sdc] No Caching mode page present
[ 4.601445] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.606677] sd 7:0:0:0: [sdc] No Caching mode page present
[ 4.606680] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.607247] sdc: sdc1
[ 4.621953] sd 7:0:0:0: [sdc] No Caching mode page present
[ 4.621956] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4.621958] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 8.394573] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.003675] sdb: sdb1
[ 9.010353] sd 6:0:0:0: [sdb] No Caching mode page present
[ 9.010356] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 9.010358] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 22.537008] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.567631] udevd[408]: starting version 175
[ 22.657510] lp: driver loaded but no devices found
[ 22.696098] Adding 4040700k swap on /dev/sda5. Priority:-1 extents:1 across:4040700k
[ 23.022786] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 23.023141] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.023148] mei 0000:00:16.0: setting latency timer to 64
[ 23.023224] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 23.026628] wmi: Mapper loaded
[ 23.092962] [drm] Initialized drm 1.1.0 20060810
[ 23.113595] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.113599] i915 0000:00:02.0: setting latency timer to 64
[ 23.128046] i915 0000:00:02.0: irq 51 for MSI/MSI-X
[ 23.128051] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 23.128052] [drm] Driver supports precise vblank timestamp query.
[ 23.128205] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 23.128219] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 23.128221] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 23.282128] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 23.282147] acer_wmi: Function bitmap for Communication Button: 0x1
[ 23.282279] acer_wmi: Brightness must be controlled by generic video driver
[ 23.282495] input: Acer WMI hotkeys as /devices/virtual/input/input5
[ 23.282721] acer_wmi: Get 0x1 Device Status failed: 0xe2 - 0x0
[ 23.282879] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[ 23.436885] type=1400 audit(1340451253.491:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=661 comm="apparmor_parser"
[ 23.436942] type=1400 audit(1340451253.491:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=663 comm="apparmor_parser"
[ 23.437252] type=1400 audit(1340451253.491:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=661 comm="apparmor_parser"
[ 23.437310] type=1400 audit(1340451253.491:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=663 comm="apparmor_parser"
[ 23.437457] type=1400 audit(1340451253.491:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=661 comm="apparmor_parser"
[ 23.437517] type=1400 audit(1340451253.491:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=663 comm="apparmor_parser"
[ 23.439449] cfg80211: Calling CRDA to update world regulatory domain
[ 23.552699] Linux video capture interface: v2.00
[ 23.590750] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002)
[ 23.597296] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
[ 23.597372] usbcore: registered new interface driver uvcvideo
[ 23.597374] USB Video Class driver (1.1.1)
[ 23.638886] cfg80211: World regulatory domain updated:
[ 23.638890] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.638893] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.638896] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.638899] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.638902] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.638904] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.699146] fbcon: inteldrmfb (fb0) is primary device
[ 23.699232] Console: switching to colour frame buffer device 170x48
[ 23.699259] fb0: inteldrmfb frame buffer device
[ 23.699261] drm: registered panic notifier
[ 23.758309] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 23.863721] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 23.863735] ath9k 0000:03:00.0: setting latency timer to 64
[ 23.952653] ath: EEPROM regdomain: 0x65
[ 23.952655] ath: EEPROM indicates we should expect a direct regpair map
[ 23.952658] ath: Country alpha2 being used: 00
[ 23.952659] ath: Regpair used: 0x65
[ 23.952661] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952663] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952665] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952666] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952668] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952670] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952671] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952673] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952674] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952676] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952677] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952679] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952681] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952682] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952684] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952686] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952687] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952689] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952690] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952692] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952693] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952695] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952696] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952698] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952700] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 23.952701] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 23.952703] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 23.953823] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 23.996792] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 23.997301] Registered led device: ath9k-phy0
[ 23.997310] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xf8fc0000, irq=17
[ 23.998815] acpi device:2f: registered as cooling_device8
[ 23.998997] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 23.999047] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 23.999075] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110623/video-1155)
[ 23.999154] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 23.999161] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node f7447a38), AE_NOT_FOUND (20110623/psparse-536)
[ 23.999329] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input8
[ 23.999368] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 23.999401] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 23.999442] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 23.999521] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 23.999555] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 24.087084] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[ 24.093092] init: failsafe main process (800) killed by TERM signal
[ 24.147264] Bluetooth: Core ver 2.16
[ 24.147278] NET: Registered protocol family 31
[ 24.147280] Bluetooth: HCI device and connection manager initialized
[ 24.147282] Bluetooth: HCI socket layer initialized
[ 24.147283] Bluetooth: L2CAP socket layer initialized
[ 24.147287] Bluetooth: SCO socket layer initialized
[ 24.148750] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.148753] Bluetooth: BNEP filters: protocol multicast
[ 24.192396] ppdev: user-space parallel port driver
[ 24.209331] Bluetooth: RFCOMM TTY layer initialized
[ 24.209337] Bluetooth: RFCOMM socket layer initialized
[ 24.209339] Bluetooth: RFCOMM ver 1.11
[ 24.216440] type=1400 audit(1340451254.271:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=874 comm="apparmor_parser"
[ 24.217011] type=1400 audit(1340451254.271:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=874 comm="apparmor_parser"
[ 24.268654] tg3 0000:02:00.0: irq 53 for MSI/MSI-X
[ 24.268661] tg3 0000:02:00.0: irq 54 for MSI/MSI-X
[ 24.268666] tg3 0000:02:00.0: irq 55 for MSI/MSI-X
[ 24.268672] tg3 0000:02:00.0: irq 56 for MSI/MSI-X
[ 24.268677] tg3 0000:02:00.0: irq 57 for MSI/MSI-X
[ 24.432223] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.432673] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.480349] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.480539] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.548873] hda_codec: ALC269: SKU not ready 0x598301f0
[ 24.555567] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 24.555639] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 24.555783] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 24.555915] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 24.654324] type=1400 audit(1340451254.707:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=928 comm="apparmor_parser"
[ 24.654577] type=1400 audit(1340451254.711:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=929 comm="apparmor_parser"
[ 24.748854] bbswitch: version 0.4.2
[ 24.748862] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 24.748871] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 24.748962] bbswitch: detected an Optimus _DSM function
[ 24.748969] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 24.750675] bbswitch: disabling discrete graphics
[ 24.750831] bbswitch: Result of Optimus _DSM call: 11000059
[ 24.766863] pci 0000:01:00.0: power state changed by ACPI to D3
[ 25.436734] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 25.560282] init: plymouth-stop pre-start process (1208) terminated with status 1
[ 25.587787] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 25.977264] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 25.977268] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
[ 25.977271] tg3 0000:02:00.0: eth0: EEE is disabled
[ 25.977404] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.134551] wlan0: authenticate with 58:98:35:07:94:dc (try 1)
[ 27.137761] wlan0: authenticated
[ 27.172999] wlan0: associate with 58:98:35:07:94:dc (try 1)
[ 27.177233] wlan0: RX AssocResp from 58:98:35:07:94:dc (capab=0x411 status=0 aid=1)
[ 27.177237] wlan0: associated
[ 27.185834] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.362890] eth0: no IPv6 routers present
[ 37.578787] wlan0: no IPv6 routers presentubuntuαπό modenas88 » 23 Ιουν 2012, 21:36
BHacker έγραψε:Έχω το λάπτοπ Acer Aspire 5750G με κάρτα γραφικών την Nvidia GtT540M, μπορείτε να μου υποδείξετε με ποιο ακριβώς τρόπο είναι δυνατόν να εγκαταστήσω τους drivers της εν λόγω κάρτας;
Την παρούσα στιγμή στις λεπτομέρειες του συστήματος αναφέρει για την κάρτα γραφικών: Άγνωστο...
Έχεις κάποιο πρόβλημα με τα γραφικά ή ποιο είναι το πρόβλημα ; (δεν βρήκα να αναφέρεται κάτι)
/usr/lib/nux/unity_support_test -p
από BHacker » 24 Ιουν 2012, 01:57
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile x86/MMX/SSE2
OpenGL version string: 3.0 Mesa 8.0.2
Not software rendered: yes
Not blacklisted: yes
GLX fbconfig: yes
GLX texture from pixmap: yes
GL npot or rect textures: yes
GL vertex program: yes
GL fragment program: yes
GL vertex buffer object: yes
GL framebuffer object: yes
GL version is 1.4+: yes
Unity 3D supported: yes
από Learner » 24 Ιουν 2012, 02:13
Άλλαξε τον τίτλο του θέματος σου , κάνε επεξεργασία μόνο στο πρώτο ποστ , σε κάτι πιο συγκεκριμένο. π.χ : Πρόβλημα με (Nvidia GT540M / Intel)-Hybrid , Ubuntu 12.04 , γιατί το πρόβλημα σου αφορά την υβριδική τεχνολογία που έχει το σύστημα σου. Επίσης μπορεί κάποιος που το ξέρει το θέμα(περί Hybrid Graphics) να απαντήσει.
BHacker έγραψε:Το πρόβλημα είναι ότι δεν μπορώ να εγκαταστήσω τους drivers της κάρτας γραφικών.
BHacker έγραψε:stelad@stelad-Aspire-5750G:~$ apt-cache policy nvidia-current
nvidia-current:
Installed: 302.17-0ubuntu1~precise~xup1
Candidate: 302.17-0ubuntu1~precise~xup1
Version table:
*** 302.17-0ubuntu1~precise~xup1 0
500 http://ppa.launchpad.net/ubuntu-x-swat/ ... es/ubuntu/ precise/main i386 Packages
100 /var/lib/dpkg/status
295.40-0ubuntu1 0
500 http://gr.archive.ubuntu.com/ubuntu/ precise/restricted i386 Packages
lsmod | grep -e nouveau -e nvidiamodenas88 έγραψε:Η εντολή lspci -nnk δεν εμφανίζει αυτό που περιμένουμε για την nvidia, επειδή δεν έχουν εγκατασταθεί (στην πραγματικότητα φορτωθεί) οι drivers (modules).
από modenas88 » 24 Ιουν 2012, 20:25
BHacker έγραψε:Το πρόβλημα είναι ότι δεν μπορώ να εγκαταστήσω τους drivers της κάρτας γραφικών.
Learner έγραψε: Τους έχεις εγκαταστήσει από αποθετήριο(ppa:ubuntu-x-swat/x-updates )
Learner έγραψε:Οι drivers έχουν εγκατασταθεί , ωστόσο όπως σωστά λες , δεν φορτώνονται για κάποιο λόγο.. πιθανών κάτι έχει γίνει με το Hybrid σύστημα που έχει . Λογικά όμως το bubmlebee έπρεπε να δουλεύει.
Δεν έχω στα χέρια μου και κάποιο τέτοιο σύστημα , να το τσεκάρω ο ίδιος και δεν έχω δουλέψει το bumblebee γιατί δεν μου χρειάζεται. Ίσως θέλει κάποιο configuration.
Μπαίνει πάντως σε ubuntu 3d και με την intel.
Σκέφτηκα να δοκιμάσουμε να τους κάνουμε force load , από το /etc/modules , επίσης να δοκιμάζαμε και blacklist τον i915 , αλλά υπάρχει περίπτωση να μην έχει μετά γραφικό περιβάλλον. Τι λες ;
Επίσης στο dmesg είδα κάποιες αναφορές λάθους για το ACPI , να ευθύνεται αυτό ; Να δοκιμάσουμε και παράμετρο acpi=force , στον πυρήνα ;
lsmod
grep -i -e nouveau -e nvidia /etc/modprobe.d/*
grep -i -e nouveau -e nvidia /etc/X11/xorg.conf