FlyTv Platinum Tv Tuner

...κάρτες γραφικών / προβλήματα εικόνας / τηλεοπτικοί δέκτες
Κανόνες Δ. Συζήτησης
Αν έχετε πρόβλημα με την κάρτα γραφικών σας και δεν μπορείτε να μπείτε σε γραφικό περιβάλλον,
δοκιμάστε να τρέξετε την παρακάτω εντολή για να ελέγξετε αν το σύστημά σας χρειάζεται πρόσθετους κλειστούς οδηγούς:
jockey-text

Για κάρτα τηλεόρασης δώστε τα αποτελέσματα των παρακάτω εντολών :
lspci -nn (Για εσωτερικές κάρτες pci)
lsusb (Για εξωτερικές κάρτες με σύνδεση usb)

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό elbuntu » 28 Απρ 2011, 12:49

Έκανα δημιουργία νέου χρήστη και πάλι τα ίδια
Κώδικας: Επιλογή όλων
elbuntu@elias-System-Product-Name:~$ tvtime
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/elbuntu/.tvtime/tvtime.xml
videoinput: Cannot open capture device /dev/video0: Δεν υπάρχει τέτοιο αρχείο ή κατάλογος
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
Σφάλμα κατάτμησης (segmentation fault)
elbuntu@elias-System-Product-Name:~$


apt-cache policy tvtime
Κώδικας: Επιλογή όλων
tvtime:
Εγκατεστημένα: 1.0.2-6.1ubuntu1
Υποψήφιο: 1.0.2-6.1ubuntu1
Πίνακας Έκδοσης:
*** 1.0.2-6.1ubuntu1 0
500 http://gr.archive.ubuntu.com/ubuntu/ maverick/universe i386 Packages
100 /var/lib/dpkg/status
elias@elias-System-Product-Name:~$
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 15.10 wily 4.2.0-22-generic 64bit (el_GR.UTF-8, Unity ubuntu), Windows 8
3 Intel Core i7 CPU 920 2.67GHz ‖ RAM 3942 MiB ‖ MSI MSI X58 Pro (MS-7522) - MSI MS-7522
4 Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4870] [1002:9440] {radeon}
5 enp6s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
elbuntu
babeTUX
babeTUX
 
Δημοσιεύσεις: 54
Εγγραφή: 17 Απρ 2011, 23:53
Εκτύπωση

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό vagrale13 » 28 Απρ 2011, 15:04

Δωσε τα αποτελεσματα απο τις εντολες
Κώδικας: Επιλογή όλων
cat /etc/modules
ls -l /dev/vid*
Desktop 1: Mint 13 Maya i386 / Ubuntu 14.10 Utopic Unicorn i386 (development branch)
CPU: AMD ATHLON II X2 215 │ RAM: 4026Mb │ Graphics Card: GeForce 210 512MB │ LG W2243S : 1920 x 1080
Desktop 2: Ubuntu 12.04 LTS Precise Pangoli i386
AMD Athlon 64 X2 5800+ │ 1024Mb │ nForce 7600 256MB (onboard) | 1024 x 768
Laptop : Sony Vaio VGN-N11m : Ubuntu 14.04Lts Trusty Tahr i386 (Mate desktop)


*Οδηγοί - How to - Tutorials σε Κατηγορίες
*Oδηγίες προς νεοεισερχόμενους σε forum ή linux
Άβαταρ μέλους
vagrale13
Freedom
Freedom
 
Δημοσιεύσεις: 7107
Εγγραφή: 04 Απρ 2009, 19:29
Τοποθεσία: κάπου εδώ μέσα στο net :P
Launchpad: vagrale
IRC: vagrale13
Εκτύπωση

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό elbuntu » 28 Απρ 2011, 15:39

Κώδικας: Επιλογή όλων
elias@elias-System-Product-Name:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp
saa7134 card=100
saa7134 card=100
elias@elias-System-Product-Name:~$ ls -l /dev/vid*
ls: αδυναμία πρόσβασης του /dev/vid*: Δεν υπάρχει τέτοιο αρχείο ή κατάλογος
elias@elias-System-Product-Name:~$
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 15.10 wily 4.2.0-22-generic 64bit (el_GR.UTF-8, Unity ubuntu), Windows 8
3 Intel Core i7 CPU 920 2.67GHz ‖ RAM 3942 MiB ‖ MSI MSI X58 Pro (MS-7522) - MSI MS-7522
4 Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4870] [1002:9440] {radeon}
5 enp6s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
elbuntu
babeTUX
babeTUX
 
Δημοσιεύσεις: 54
Εγγραφή: 17 Απρ 2011, 23:53
Εκτύπωση

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό vagrale13 » 28 Απρ 2011, 15:51

Εκτελεσε στο τερματικο
Κώδικας: Επιλογή όλων
sudo gedit /etc/modules

και το αρχειο που θα ανοιξει, σβησε τις 2 τελευταιες γραμμες,
δηλαδη η τελικη μορφη του αρχειου, να ειναι ετσι
Κώδικας: Επιλογή όλων
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp

πατησε Αποθηκευση - κλεισε το αρχειο - κανε επανεκκινηση, και μετα που θα μπεις, ξαναδωσε το αποτελεσμα απο
Κώδικας: Επιλογή όλων
ls -l /dev/vid*
Desktop 1: Mint 13 Maya i386 / Ubuntu 14.10 Utopic Unicorn i386 (development branch)
CPU: AMD ATHLON II X2 215 │ RAM: 4026Mb │ Graphics Card: GeForce 210 512MB │ LG W2243S : 1920 x 1080
Desktop 2: Ubuntu 12.04 LTS Precise Pangoli i386
AMD Athlon 64 X2 5800+ │ 1024Mb │ nForce 7600 256MB (onboard) | 1024 x 768
Laptop : Sony Vaio VGN-N11m : Ubuntu 14.04Lts Trusty Tahr i386 (Mate desktop)


*Οδηγοί - How to - Tutorials σε Κατηγορίες
*Oδηγίες προς νεοεισερχόμενους σε forum ή linux
Άβαταρ μέλους
vagrale13
Freedom
Freedom
 
Δημοσιεύσεις: 7107
Εγγραφή: 04 Απρ 2009, 19:29
Τοποθεσία: κάπου εδώ μέσα στο net :P
Launchpad: vagrale
IRC: vagrale13
Εκτύπωση

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό elbuntu » 28 Απρ 2011, 16:27

Κώδικας: Επιλογή όλων
elias@elias-System-Product-Name:~$ ls -l /dev/vid*
ls: αδυναμία πρόσβασης του /dev/vid*: Δεν υπάρχει τέτοιο αρχείο ή κατάλογος
elias@elias-System-Product-Name:~$


Η αλήθεια είναι ότι όντως δεν υπάρχει ο φάκελος vid σε αυτήν την διαδρομή.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 15.10 wily 4.2.0-22-generic 64bit (el_GR.UTF-8, Unity ubuntu), Windows 8
3 Intel Core i7 CPU 920 2.67GHz ‖ RAM 3942 MiB ‖ MSI MSI X58 Pro (MS-7522) - MSI MS-7522
4 Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4870] [1002:9440] {radeon}
5 enp6s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
elbuntu
babeTUX
babeTUX
 
Δημοσιεύσεις: 54
Εγγραφή: 17 Απρ 2011, 23:53
Εκτύπωση

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό elbuntu » 28 Απρ 2011, 17:35

Δεν ξέρω αν αυτό είναι αισιόδοξο αλλά όταν δίνω tvtime έχω:


Κώδικας: Επιλογή όλων
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/elias/.tvtime/tvtime.xml
[u]videoinput: Cannot open capture device /dev/video0: Δεν υπάρχει τέτοιο αρχείο ή κατάλογος[/u]
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
Σφάλμα κατάτμησης (segmentation fault)
elias@elias-System-Product-Name:~$

Στις δύο πρώτες γραμμές μου έβγαζε άρνηση πρόσβασης,έιχα κάνει μια πατάτα, φαίνεται στο history σε προηγούμενο ποστ.Το πρόβλημα τώρα έιναι ότι η γραμμή videoinput.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 15.10 wily 4.2.0-22-generic 64bit (el_GR.UTF-8, Unity ubuntu), Windows 8
3 Intel Core i7 CPU 920 2.67GHz ‖ RAM 3942 MiB ‖ MSI MSI X58 Pro (MS-7522) - MSI MS-7522
4 Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4870] [1002:9440] {radeon}
5 enp6s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
elbuntu
babeTUX
babeTUX
 
Δημοσιεύσεις: 54
Εγγραφή: 17 Απρ 2011, 23:53
Εκτύπωση

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό simosx » 28 Απρ 2011, 17:45

elbuntu έγραψε:Δεν ξέρω αν αυτό είναι αισιόδοξο αλλά όταν δίνω tvtime έχω:


Κώδικας: Επιλογή όλων
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/elias/.tvtime/tvtime.xml
[u]videoinput: Cannot open capture device /dev/video0: Δεν υπάρχει τέτοιο αρχείο ή κατάλογος[/u]
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
Σφάλμα κατάτμησης (segmentation fault)
elias@elias-System-Product-Name:~$

Στις δύο πρώτες γραμμές μου έβγαζε άρνηση πρόσβασης,έιχα κάνει μια πατάτα, φαίνεται στο history σε προηγούμενο ποστ.Το πρόβλημα τώρα έιναι ότι η γραμμή videoinput.


Φαίνεται για κάποιο λόγο ότι δεν έχεις και ήχο. Είναι έτσι;
Αν ναι,
1. Δώσε τις πληροφορίες κατά viewtopic.php?f=38&t=7867
2. Νομίζω ότι απλά για σένα δε φορτώνεται σωστά το άρθρωμα για την κάρτα τηλεόρασης. Δώσε το αποτέλεσμα της εντολής dmesg (το γράφεις μέσα σε [cοde][/cοde], δες το κατάλληλο κουμπί επάνω).
προσωπικό ιστολόγιο ϗ πλανήτης Ubuntu-gr
Συμβάλετε και εσείς στο ελληνικό βιβλίο Ubuntu!
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 13.10 saucy 3.11.0-031100rc1-generic 64bit (el_GR.UTF-8, Unity ubuntu)
3 AMD E-450 APU with Radeon HD Graphics ‖ RAM 3555 MiB ‖ Sony Corporation VAIO
4 AMD nee ATI Wrestler [Radeon HD 6320] [1002:9806] {fglrx_pci}
5 eth0: Atheros Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) ⋮ wlan0: Atheros Inc. AR9285 [168c:002b] (rev 01)
Φτιάξτε και εσείς τη δική σας υπογραφή (παραπάνω κείμενο) αυτόματα με κλικ εδώ!
simosx
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10334
Εγγραφή: 11 Μάιος 2008, 18:52
Launchpad: simosx
IRC: simosx
Εκτύπωση

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό elbuntu » 28 Απρ 2011, 19:43

Ήχο έχω όταν για παράδειγμα αναπαράγω ένα video ή μουσική.

dmseg

Κώδικας: Επιλογή όλων
[ 0.197572] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.197575] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xffffffff] (subtractive decode)
[ 0.197598] pci_bus 0000:00: on NUMA node 0
[ 0.197602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.197820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.197892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.198051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.198130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.198202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.215040] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.215166] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.215294] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.215417] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.215539] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.215663] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.215786] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.215909] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.215965] HEST: Table is not found!
[ 0.216069] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.216076] vgaarb: loaded
[ 0.216255] SCSI subsystem initialized
[ 0.216341] libata version 3.00 loaded.
[ 0.216397] usbcore: registered new interface driver usbfs
[ 0.216410] usbcore: registered new interface driver hub
[ 0.216436] usbcore: registered new device driver usb
[ 0.216579] ACPI: WMI: Mapper loaded
[ 0.216582] PCI: Using ACPI for IRQ routing
[ 0.216586] PCI: pci_cache_line_size set to 64 bytes
[ 0.216697] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.216700] reserve RAM buffer: 00000000bbf90000 - 00000000bbffffff
[ 0.216800] NetLabel: Initializing
[ 0.216803] NetLabel: domain hash size = 128
[ 0.216804] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.216817] NetLabel: unlabeled traffic allowed by default
[ 0.216850] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.216855] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.216861] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.224032] Switching to clocksource tsc
[ 0.236031] AppArmor: AppArmor Filesystem Enabled
[ 0.236049] pnp: PnP ACPI init
[ 0.236068] ACPI: bus type pnp registered
[ 0.240835] pnp: PnP ACPI: found 17 devices
[ 0.240838] ACPI: ACPI bus type pnp unregistered
[ 0.240842] PnPBIOS: Disabled by ACPI PNP
[ 0.240856] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.240866] system 00:08: [io 0x0290-0x0297] has been reserved
[ 0.240872] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.240875] system 00:09: [io 0x0800-0x087f] has been reserved
[ 0.240878] system 00:09: [io 0x0480-0x04bf] has been reserved
[ 0.240882] system 00:09: [mem 0xffafe000-0xffb0cbff] could not be reserved
[ 0.240885] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.240889] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.240892] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.240895] system 00:09: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.240898] system 00:09: [mem 0xfebfe000-0xfebfec00] has been reserved
[ 0.240906] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.240909] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.240916] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.240922] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.240925] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.240929] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.240932] system 00:10: [mem 0x00100000-0xbbffffff] could not be reserved
[ 0.277142] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc000000-0xbc3fffff]
[ 0.277147] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.277151] pci 0000:00:1c.4: BAR 15: assigned [mem 0xbc600000-0xbc7fffff 64bit pref]
[ 0.277156] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.277159] pci 0000:00:1f.3: BAR 0: assigned [mem 0xbc800000-0xbc8000ff]
[ 0.277165] pci 0000:00:1f.3: BAR 0: set to [mem 0xbc800000-0xbc8000ff] (PCI address [0xbc800000-0xbc8000ff]
[ 0.277169] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.277173] pci 0000:00:01.0: bridge window [io 0x7000-0x9fff]
[ 0.277177] pci 0000:00:01.0: bridge window [mem 0xff600000-0xff6fffff]
[ 0.277181] pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfdfffff 64bit pref]
[ 0.277187] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.277191] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.277197] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbc3fffff]
[ 0.277201] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.277208] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.277211] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.277217] pci 0000:00:1c.3: bridge window [mem 0xff800000-0xff8fffff]
[ 0.277222] pci 0000:00:1c.3: bridge window [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.277229] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.277232] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 0.277238] pci 0000:00:1c.4: bridge window [mem 0xff700000-0xff7fffff]
[ 0.277242] pci 0000:00:1c.4: bridge window [mem 0xbc600000-0xbc7fffff 64bit pref]
[ 0.277249] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.277251] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.277256] pci 0000:00:1e.0: bridge window [mem 0xff900000-0xff9fffff]
[ 0.277260] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.277280] alloc irq_desc for 16 on node -1
[ 0.277282] alloc kstat_irqs on node -1
[ 0.277290] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.277294] pci 0000:00:01.0: setting latency timer to 64
[ 0.277303] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.277308] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.277312] pci 0000:00:1c.0: setting latency timer to 64
[ 0.277321] alloc irq_desc for 19 on node -1
[ 0.277323] alloc kstat_irqs on node -1
[ 0.277327] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.277332] pci 0000:00:1c.3: setting latency timer to 64
[ 0.277341] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.277345] pci 0000:00:1c.4: setting latency timer to 64
[ 0.277352] pci 0000:00:1e.0: setting latency timer to 64
[ 0.277357] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.277360] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.277363] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.277365] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.277368] pci_bus 0000:00: resource 8 [mem 0xbc000000-0xffffffff]
[ 0.277371] pci_bus 0000:01: resource 0 [io 0x7000-0x9fff]
[ 0.277373] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
[ 0.277376] pci_bus 0000:01: resource 2 [mem 0xbfe00000-0xdfdfffff 64bit pref]
[ 0.277379] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.277382] pci_bus 0000:04: resource 1 [mem 0xbc000000-0xbc3fffff]
[ 0.277385] pci_bus 0000:04: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.277388] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.277390] pci_bus 0000:03: resource 1 [mem 0xff800000-0xff8fffff]
[ 0.277393] pci_bus 0000:03: resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.277396] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.277399] pci_bus 0000:02: resource 1 [mem 0xff700000-0xff7fffff]
[ 0.277401] pci_bus 0000:02: resource 2 [mem 0xbc600000-0xbc7fffff 64bit pref]
[ 0.277404] pci_bus 0000:05: resource 1 [mem 0xff900000-0xff9fffff]
[ 0.277407] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.277410] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.277412] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.277415] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.277418] pci_bus 0000:05: resource 8 [mem 0xbc000000-0xffffffff]
[ 0.277463] NET: Registered protocol family 2
[ 0.277543] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.277818] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.278262] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.278482] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.278484] TCP reno registered
[ 0.278488] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.278497] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.278591] NET: Registered protocol family 1
[ 0.278752] pci 0000:01:00.0: Boot video device
[ 0.278770] PCI: CLS 32 bytes, default 64
[ 0.278981] cpufreq-nforce2: No nForce2 chipset.
[ 0.279018] Scanning for low memory corruption every 60 seconds
[ 0.279135] audit: initializing netlink socket (disabled)
[ 0.279146] type=2000 audit(1304019244.272:1): initialized
[ 0.290729] highmem bounce pool size: 64 pages
[ 0.290736] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.292280] VFS: Disk quotas dquot_6.5.2
[ 0.292350] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.292984] fuse init (API version 7.14)
[ 0.293086] msgmni has been set to 1666
[ 0.430432] Freeing initrd memory: 10484k freed
[ 0.437934] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.437939] io scheduler noop registered
[ 0.437941] io scheduler deadline registered
[ 0.437957] io scheduler cfq registered (default)
[ 0.438092] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.438120] alloc irq_desc for 40 on node -1
[ 0.438123] alloc kstat_irqs on node -1
[ 0.438133] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.438200] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.438232] alloc irq_desc for 41 on node -1
[ 0.438234] alloc kstat_irqs on node -1
[ 0.438241] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.438328] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.438360] alloc irq_desc for 42 on node -1
[ 0.438362] alloc kstat_irqs on node -1
[ 0.438369] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.438458] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.438491] alloc irq_desc for 43 on node -1
[ 0.438493] alloc kstat_irqs on node -1
[ 0.438500] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.438607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.438714] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.438824] intel_idle: MWAIT substates: 0x20
[ 0.438826] intel_idle: does not run on family 6 model 15
[ 0.438944] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.438950] ACPI: Power Button [PWRB]
[ 0.439003] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.439006] ACPI: Power Button [PWRF]
[ 0.439309] ACPI: acpi_idle registered with cpuidle
[ 0.442793] ERST: Table is not found!
[ 0.442820] isapnp: Scanning for PnP cards...
[ 0.443051] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.443149] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.443524] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.444980] brd: module loaded
[ 0.445576] loop: module loaded
[ 0.445790] ata_piix 0000:00:1f.2: version 2.13
[ 0.445805] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.445810] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.599945] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.600007] scsi0 : ata_piix
[ 0.600084] scsi1 : ata_piix
[ 0.602439] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[ 0.602445] ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[ 0.602478] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.602483] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.602520] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.602559] scsi2 : ata_piix
[ 0.602616] scsi3 : ata_piix
[ 0.604153] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
[ 0.604158] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
[ 0.604210] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.604215] alloc irq_desc for 17 on node -1
[ 0.604217] alloc kstat_irqs on node -1
[ 0.604223] pata_acpi 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.604253] pata_acpi 0000:02:00.1: setting latency timer to 64
[ 0.604266] pata_acpi 0000:02:00.1: PCI INT B disabled
[ 0.604596] Fixed MDIO Bus: probed
[ 0.604631] PPP generic driver version 2.4.2
[ 0.604670] tun: Universal TUN/TAP device driver, 1.6
[ 0.604672] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.604766] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.604782] alloc irq_desc for 18 on node -1
[ 0.604784] alloc kstat_irqs on node -1
[ 0.604789] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.604802] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.604806] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.604841] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.604867] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.608739] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.608758] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xffaffc00
[ 0.623932] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.624054] hub 1-0:1.0: USB hub found
[ 0.624059] hub 1-0:1.0: 4 ports detected
[ 0.624136] alloc irq_desc for 23 on node -1
[ 0.624138] alloc kstat_irqs on node -1
[ 0.624143] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.624154] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.624158] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.624197] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.624223] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.628118] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.628132] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffaff800
[ 0.643928] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.644035] hub 2-0:1.0: USB hub found
[ 0.644044] hub 2-0:1.0: 6 ports detected
[ 0.644122] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.644139] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.644159] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.644165] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.644168] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.644204] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.644235] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
[ 0.644356] hub 3-0:1.0: USB hub found
[ 0.644361] hub 3-0:1.0: 2 ports detected
[ 0.644429] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.644435] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.644438] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.644479] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.644510] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
[ 0.644631] hub 4-0:1.0: USB hub found
[ 0.644636] hub 4-0:1.0: 2 ports detected
[ 0.644701] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.644707] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.644711] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.644748] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.644770] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
[ 0.644895] hub 5-0:1.0: USB hub found
[ 0.644900] hub 5-0:1.0: 2 ports detected
[ 0.644966] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.644972] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.644975] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.645009] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.645031] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 0.645151] hub 6-0:1.0: USB hub found
[ 0.645156] hub 6-0:1.0: 2 ports detected
[ 0.645222] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.645228] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.645231] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.645265] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.645287] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
[ 0.645406] hub 7-0:1.0: USB hub found
[ 0.645410] hub 7-0:1.0: 2 ports detected
[ 0.645560] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.648545] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.648551] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.648661] mice: PS/2 mouse device common for all mice
[ 0.648790] rtc_cmos 00:03: RTC can wake from S4
[ 0.648829] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.648852] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.648961] device-mapper: uevent: version 1.0.3
[ 0.649063] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.649125] device-mapper: multipath: version 1.1.1 loaded
[ 0.649128] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.649242] EISA: Probing bus 0 at eisa.0
[ 0.649245] EISA: Cannot allocate resource for mainboard
[ 0.649247] Cannot allocate resource for EISA slot 1
[ 0.649250] Cannot allocate resource for EISA slot 2
[ 0.649252] Cannot allocate resource for EISA slot 3
[ 0.649254] Cannot allocate resource for EISA slot 4
[ 0.649256] Cannot allocate resource for EISA slot 5
[ 0.649258] Cannot allocate resource for EISA slot 6
[ 0.649261] Cannot allocate resource for EISA slot 7
[ 0.649263] Cannot allocate resource for EISA slot 8
[ 0.649265] EISA: Detected 0 cards.
[ 0.649332] cpuidle: using governor ladder
[ 0.649334] cpuidle: using governor menu
[ 0.649673] TCP cubic registered
[ 0.649813] NET: Registered protocol family 10
[ 0.650216] lo: Disabled Privacy Extensions
[ 0.650481] NET: Registered protocol family 17
[ 0.651011] Using IPI No-Shortcut mode
[ 0.651096] PM: Resume from disk failed.
[ 0.651111] registered taskstats version 1
[ 0.651440] Magic number: 7:138:598
[ 0.651455] virtio-pci: hash matches
[ 0.651507] rtc_cmos 00:03: setting system clock to 2011-04-28 19:34:04 UTC (1304019244)
[ 0.651510] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.651512] EDD information not available.
[ 0.665839] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.795768] isapnp: No Plug & Play device found
[ 0.943219] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.953812] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.266676] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.266694] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 1.420085] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.420100] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 1.428333] ata1.00: ATA-7: HDT722525DLA380, V44OA9BA, max UDMA/133
[ 1.428338] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.444393] ata1.00: configured for UDMA/133
[ 1.444584] scsi 0:0:0:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5
[ 1.444774] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.444791] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.444833] sd 0:0:0:0: [sda] Write Protect is off
[ 1.444836] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.444875] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.445088] sda: sda1 sda2 < sda5 > sda3 sda4
[ 1.487210] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.487234] Freeing unused kernel memory: 708k freed
[ 1.487601] Write protecting the kernel text: 5096k
[ 1.487690] Write protecting the kernel read-only data: 2016k
[ 1.505299] udev[82]: starting version 163
[ 1.573463] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.573502] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 1.603809] scsi4 : pata_jmicron
[ 1.623492] scsi5 : pata_jmicron
[ 1.624522] ata5: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 17
[ 1.624526] ata6: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 17
[ 1.626189] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.626211] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.626258] r8169 0000:03:00.0: setting latency timer to 64
[ 1.626318] alloc irq_desc for 44 on node -1
[ 1.626320] alloc kstat_irqs on node -1
[ 1.626336] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[ 1.626924] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf848e000, 00:18:f3:0f:b5:92, XID 18000000 IRQ 44
[ 1.650750] Floppy drive(s): fd0 is 1.44M
[ 1.668235] FDC 0 is a post-1991 82077
[ 2.005158] ata5.00: ATAPI: LITE-ON DVDRW LH-20A1P, KL0P, max UDMA/66
[ 2.005202] ata5.01: ATAPI: ATAPI DVD D DH16D2P, HP58, max UDMA/33
[ 2.030798] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.037055] ata5.00: configured for UDMA/66
[ 2.080589] ata5.01: configured for UDMA/33
[ 2.082870] scsi 4:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1P KL0P PQ: 0 ANSI: 5
[ 2.085325] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.085330] Uniform CD-ROM driver Revision: 3.20
[ 2.085506] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.085582] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.086981] scsi 4:0:1:0: CD-ROM ATAPI DVD D DH16D2P HP58 PQ: 0 ANSI: 5
[ 2.091045] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.091197] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 2.091273] sr 4:0:1:0: Attached scsi generic sg2 type 5
[ 3.563783] Adding 1999868k swap on /dev/sda3. Priority:-1 extents:1 across:1999868k
[ 4.805233] udev[339]: starting version 163
[ 4.969935] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 6.148058] parport_pc 00:0b: reported by Plug and Play ACPI
[ 6.148170] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 6.299204] ahci 0000:02:00.0: version 3.0
[ 6.299229] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.305029] lp0: using parport0 (interrupt-driven).
[ 6.312001] ppdev: user-space parallel port driver
[ 6.312480] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 6.312485] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 6.312492] ahci 0000:02:00.0: setting latency timer to 64
[ 6.312649] scsi6 : ahci
[ 6.312869] scsi7 : ahci
[ 6.312996] ata7: SATA max UDMA/133 abar m8192@0xff7fe000 port 0xff7fe100 irq 16
[ 6.313001] ata8: SATA max UDMA/133 abar m8192@0xff7fe000 port 0xff7fe180 irq 16
[ 6.506241] Linux agpgart interface v0.103
[ 6.632119] ata7: SATA link down (SStatus 0 SControl 300)
[ 6.632157] ata8: SATA link down (SStatus 0 SControl 300)
[ 6.882579] IR NEC protocol handler initialized
[ 6.913887] IR RC5(x) protocol handler initialized
[ 7.012629] psmouse serio1: ID: 10 00 64
[ 7.065010] Linux video capture interface: v2.00
[ 7.107031] saa7134: `1,1,1,1' invalid for parameter `disable_ir'
[ 7.127233] saa7134: `1,1,1,1' invalid for parameter `disable_ir'
[ 7.174614] IR RC6 protocol handler initialized
[ 7.401492] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.401497] Disabling lock debugging due to kernel taint
[ 7.513528] [fglrx] Maximum main memory to use for locked dma buffers: 2814 MBytes.
[ 7.513902] [fglrx] vendor: 1002 device: 9442 count: 1
[ 7.514694] [fglrx] ioport: bar 4, base 0x9000, size: 0x100
[ 7.514711] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.514717] pci 0000:01:00.0: setting latency timer to 64
[ 7.515172] [fglrx] Kernel PAT support is enabled
[ 7.515196] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors
[ 7.565745] IR JVC protocol handler initialized
[ 7.608265] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 7.636048] IR Sony protocol handler initialized
[ 7.674036] alloc irq_desc for 22 on node -1
[ 7.674040] alloc kstat_irqs on node -1
[ 7.674048] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.674098] alloc irq_desc for 45 on node -1
[ 7.674101] alloc kstat_irqs on node -1
[ 7.674110] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 7.674137] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.910839] lirc_dev: IR Remote Control driver registered, major 250
[ 7.939995] type=1400 audit(1304008451.782:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=536 comm="apparmor_parser"
[ 7.940007] type=1400 audit(1304008451.782:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=535 comm="apparmor_parser"
[ 7.940720] type=1400 audit(1304008451.786:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=536 comm="apparmor_parser"
[ 7.940737] type=1400 audit(1304008451.786:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=535 comm="apparmor_parser"
[ 7.941107] type=1400 audit(1304008451.786:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=536 comm="apparmor_parser"
[ 7.941127] type=1400 audit(1304008451.786:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=535 comm="apparmor_parser"
[ 7.974776] IR LIRC bridge handler initialized
[ 8.630383] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.630435] alloc irq_desc for 46 on node -1
[ 8.630438] alloc kstat_irqs on node -1
[ 8.630449] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 8.630476] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 11.056492] type=1400 audit(1304008454.902:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=922 comm="apparmor_parser"
[ 11.057215] type=1400 audit(1304008454.902:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=922 comm="apparmor_parser"
[ 11.057607] type=1400 audit(1304008454.902:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=922 comm="apparmor_parser"
[ 11.097696] type=1400 audit(1304008454.942:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=921 comm="apparmor_parser"
[ 13.294717] r8169 0000:03:00.0: eth0: link up
[ 13.294724] r8169 0000:03:00.0: eth0: link up
[ 14.771168] audit_printk_skb: 30 callbacks suppressed
[ 14.771171] type=1400 audit(1304008458.614:22): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1112 comm="apparmor_parser"
[ 16.306616] alloc irq_desc for 47 on node -1
[ 16.306620] alloc kstat_irqs on node -1
[ 16.306631] fglrx_pci 0000:01:00.0: irq 47 for MSI/MSI-X
[ 16.307629] [fglrx] Firegl kernel thread PID: 1255
[ 16.307838] [fglrx] IRQ 47 Enabled
[ 17.336913] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.110735] [fglrx] Gart USWC size:924 M.
[ 19.110738] [fglrx] Gart cacheable size:365 M.
[ 19.110745] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.110748] [fglrx] Reserved FB block: Unshared offset:fd1b000, size:2e5000
[ 19.110751] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 24.208539] eth0: no IPv6 routers present
[ 26.840613] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0
[ 34.260750] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 41.193257] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 41.696955] ISOFS: changing to secondary root
[ 47.917561] lo: Disabled Privacy Extensions
elias@elias-System-Product-Name:~$
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 15.10 wily 4.2.0-22-generic 64bit (el_GR.UTF-8, Unity ubuntu), Windows 8
3 Intel Core i7 CPU 920 2.67GHz ‖ RAM 3942 MiB ‖ MSI MSI X58 Pro (MS-7522) - MSI MS-7522
4 Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4870] [1002:9440] {radeon}
5 enp6s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
elbuntu
babeTUX
babeTUX
 
Δημοσιεύσεις: 54
Εγγραφή: 17 Απρ 2011, 23:53
Εκτύπωση

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό vagrale13 » 28 Απρ 2011, 20:03

Την εγκατασταση πως την εχεις κανει, κανονικα ή μεσα απο τα παραθυρα(wubi) ?
Desktop 1: Mint 13 Maya i386 / Ubuntu 14.10 Utopic Unicorn i386 (development branch)
CPU: AMD ATHLON II X2 215 │ RAM: 4026Mb │ Graphics Card: GeForce 210 512MB │ LG W2243S : 1920 x 1080
Desktop 2: Ubuntu 12.04 LTS Precise Pangoli i386
AMD Athlon 64 X2 5800+ │ 1024Mb │ nForce 7600 256MB (onboard) | 1024 x 768
Laptop : Sony Vaio VGN-N11m : Ubuntu 14.04Lts Trusty Tahr i386 (Mate desktop)


*Οδηγοί - How to - Tutorials σε Κατηγορίες
*Oδηγίες προς νεοεισερχόμενους σε forum ή linux
Άβαταρ μέλους
vagrale13
Freedom
Freedom
 
Δημοσιεύσεις: 7107
Εγγραφή: 04 Απρ 2009, 19:29
Τοποθεσία: κάπου εδώ μέσα στο net :P
Launchpad: vagrale
IRC: vagrale13
Εκτύπωση

Re: FlyTv Platinum Tv Tuner

Δημοσίευσηαπό elbuntu » 28 Απρ 2011, 20:07

κανονικά από το cd από τον υπολογιστή όχι μέσα από παράθυρα γιατί έτσι δεν έχει νόημα.Double boot νομίζω το λένε όπου όταν ανοίγει ο υπολογιστής διαλέγεις λειτουργικό για να μπεις.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 15.10 wily 4.2.0-22-generic 64bit (el_GR.UTF-8, Unity ubuntu), Windows 8
3 Intel Core i7 CPU 920 2.67GHz ‖ RAM 3942 MiB ‖ MSI MSI X58 Pro (MS-7522) - MSI MS-7522
4 Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4870] [1002:9440] {radeon}
5 enp6s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
elbuntu
babeTUX
babeTUX
 
Δημοσιεύσεις: 54
Εγγραφή: 17 Απρ 2011, 23:53
Εκτύπωση

ΠροηγούμενηΕπόμενο

Επιστροφή στο Κάρτες Γραφικών / Εικόνα / TV