Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

...κάρτες γραφικών / προβλήματα εικόνας / τηλεοπτικοί δέκτες
Κανόνες Δ. Συζήτησης
Αν έχετε πρόβλημα με την κάρτα γραφικών σας και δεν μπορείτε να μπείτε σε γραφικό περιβάλλον,
δοκιμάστε να τρέξετε την παρακάτω εντολή για να ελέγξετε αν το σύστημά σας χρειάζεται πρόσθετους κλειστούς οδηγούς:
jockey-text

Για κάρτα τηλεόρασης δώστε τα αποτελέσματα των παρακάτω εντολών :
lspci -nn (Για εσωτερικές κάρτες pci)
lsusb (Για εξωτερικές κάρτες με σύνδεση usb)

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό joe iwannou » 22 Απρ 2013, 16:56

sotos21 έγραψε:Αν σου πω ότι πάλι δεν βλέπω λάθη τι θα πεις.
Όταν το παθαίνεις είσαι με ασύρματο;
Αν ναι, έτσι όπως είναι μαύρη η οθόνη προσπάθησε να του βάλεις καλώδιο.

Σχεδόν ποτέ δεν είμαι με ασύρματο
sotos21 έγραψε:Υπάρχει μια εφαρμογή η xdiagnose που μας δείχνει τα λάθη που έχει το Xorg.conf αλλά άμα την ξεκινήσουμε από τερματικό με gksudo μπορούμε να αλλάξουμε τις παραμέτρους του πυρήνα, για να μας δείχνει τα μηνύματα, έτσι ώστε να καταλάβουμε γιατί κολλάει.

Αναμένω οδηγίες ..
sotos21 έγραψε:Αν είσαι με live δεν βλάπτει επίσης να κάνεις με το gparted έναν έλεγχο και επιδιόρθωση αρχείων.

Αυτό θα το κάνω με την πρώτη ευκαιρία
Spoiler: show
1 Γνώσεις Linux: ⅜ Προγραμματισμού: ‱ ┃ Αγγλικών: ⅜
Desktop
Ubuntu-Mate 20.04
Intel Core i3-4150 CPU @ 3.50GHz ‖ RAM 7,5 GB ‖ ASRock H81M-DGS R2.0
Intel Device [8086:041e] {i915}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Άβαταρ μέλους
joe iwannou
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 1179
Εγγραφή: 25 Απρ 2010, 04:54
Τοποθεσία: Πες με τι δεν καταλαβαινεις
Εκτύπωση

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό sotos21 » 22 Απρ 2013, 18:04

Δώσε
Κώδικας: Επιλογή όλων
gksudo xdiagnose
και διάβασε τις οδηγίες, για αρχή προτείνω να τσεκάρεις πρώτη και δεύτερη επιλογή(πρόσθετα μηνύματα, εμφάνιση μηνυμάτων) και να τσεκάρουμε μετά, ανάλογα τα μηνύματα που βλέπεις στις εκκινήσεις ή στο πιο πλήρες dmesg.
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 23.10 Mantic Minotaur 6.3.0-7-generic 64bit (el_GR.UTF-8, Unity:Unity7:ubuntu unity)
3 AMD Ryzen 7 7730U with Radeon Graphics ‖ RAM 15368 MiB ‖ASUS TN3604YA - ASUS Vivobook_S_Flip TN3604YA_TN3604YA
4 Advanced Micro Devices, Inc. [AMD/ATI] Barcelo [1002:15e7] {amdgpu}
5 wlp1s0: MEDIATEK Corp. Device [14c3:7922]
Άβαταρ μέλους
sotos21
Freedom
Freedom
 
Δημοσιεύσεις: 6304
Εγγραφή: 21 Φεβ 2011, 21:28
Τοποθεσία: Αθήνα
Εκτύπωση

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό joe iwannou » 22 Απρ 2013, 19:22

sotos21 έγραψε:Δώσε
Κώδικας: Επιλογή όλων
gksudo xdiagnose

Εγινε.
sotos21 έγραψε: και διάβασε τις οδηγίες, για αρχή προτείνω να τσεκάρεις πρώτη και δεύτερη επιλογή(πρόσθετα μηνύματα, εμφάνιση μηνυμάτων)

Εγινε κι αυτο
sotos21 έγραψε:και να τσεκάρουμε μετά, ανάλογα τα μηνύματα που βλέπεις στις εκκινήσεις

Αυτο θα γινει μετα
sotos21 έγραψε:ή στο πιο πλήρες dmesg.

Αυτο το θελεις τωρα η μετα την προβληματικη εκκινηση ;
Spoiler: show
1 Γνώσεις Linux: ⅜ Προγραμματισμού: ‱ ┃ Αγγλικών: ⅜
Desktop
Ubuntu-Mate 20.04
Intel Core i3-4150 CPU @ 3.50GHz ‖ RAM 7,5 GB ‖ ASRock H81M-DGS R2.0
Intel Device [8086:041e] {i915}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Άβαταρ μέλους
joe iwannou
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 1179
Εγγραφή: 25 Απρ 2010, 04:54
Τοποθεσία: Πες με τι δεν καταλαβαινεις
Εκτύπωση

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό sotos21 » 22 Απρ 2013, 19:28

joe iwannou έγραψε:Αυτο το θελεις τωρα η μετα την προβληματικη εκκινηση ;

Δώστο και τώρα για να υπάρχει σαν σύγκριση, αλλά σίγουρα μετά για να δούμε τα μηνύματα λάθους.
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 23.10 Mantic Minotaur 6.3.0-7-generic 64bit (el_GR.UTF-8, Unity:Unity7:ubuntu unity)
3 AMD Ryzen 7 7730U with Radeon Graphics ‖ RAM 15368 MiB ‖ASUS TN3604YA - ASUS Vivobook_S_Flip TN3604YA_TN3604YA
4 Advanced Micro Devices, Inc. [AMD/ATI] Barcelo [1002:15e7] {amdgpu}
5 wlp1s0: MEDIATEK Corp. Device [14c3:7922]
Άβαταρ μέλους
sotos21
Freedom
Freedom
 
Δημοσιεύσεις: 6304
Εγγραφή: 21 Φεβ 2011, 21:28
Τοποθεσία: Αθήνα
Εκτύπωση

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό sotos21 » 22 Απρ 2013, 19:28

joe iwannou έγραψε:Αυτο το θελεις τωρα η μετα την προβληματικη εκκινηση ;

Δώστο και τώρα για να υπάρχει σαν σύγκριση, αλλά σίγουρα μετά για να δούμε τα μηνύματα λάθους.
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 23.10 Mantic Minotaur 6.3.0-7-generic 64bit (el_GR.UTF-8, Unity:Unity7:ubuntu unity)
3 AMD Ryzen 7 7730U with Radeon Graphics ‖ RAM 15368 MiB ‖ASUS TN3604YA - ASUS Vivobook_S_Flip TN3604YA_TN3604YA
4 Advanced Micro Devices, Inc. [AMD/ATI] Barcelo [1002:15e7] {amdgpu}
5 wlp1s0: MEDIATEK Corp. Device [14c3:7922]
Άβαταρ μέλους
sotos21
Freedom
Freedom
 
Δημοσιεύσεις: 6304
Εγγραφή: 21 Φεβ 2011, 21:28
Τοποθεσία: Αθήνα
Εκτύπωση

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό joe iwannou » 22 Απρ 2013, 20:20

Κώδικας: Επιλογή όλων
[ 0.355563] NET: Registered protocol family 2
[ 0.355695] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.356717] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.358809] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.359356] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.359360] TCP reno registered
[ 0.359371] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.359398] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.359522] NET: Registered protocol family 1
[ 0.359582] pci 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.359614] pci 0000:00:13.0: PCI INT A disabled
[ 0.359628] pci 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.359645] pci 0000:00:13.1: PCI INT B disabled
[ 0.359659] pci 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.359675] pci 0000:00:13.2: PCI INT C disabled
[ 0.359685] pci 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.359701] pci 0000:00:13.3: PCI INT B disabled
[ 0.359711] pci 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.359727] pci 0000:00:13.4: PCI INT C disabled
[ 0.359741] pci 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.359759] pci 0000:00:13.5: PCI INT D disabled
[ 0.359794] pci 0000:01:00.0: Boot video device
[ 0.359822] PCI: CLS 32 bytes, default 64
[ 0.362314] audit: initializing netlink socket (disabled)
[ 0.362327] type=2000 audit(1366647194.356:1): initialized
[ 0.392427] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.395361] VFS: Disk quotas dquot_6.5.2
[ 0.395447] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.396219] fuse init (API version 7.17)
[ 0.396342] msgmni has been set to 3969
[ 0.396765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.396803] io scheduler noop registered
[ 0.396805] io scheduler deadline registered
[ 0.396852] io scheduler cfq registered (default)
[ 0.397063] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.397106] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.397239] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.397266] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.397669] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.397695] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 0.397790] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.397816] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[ 0.397953] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 0.397958] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.397960] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.397965] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 0.397984] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 0.397988] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 0.398006] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.398008] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
[ 0.398012] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.398032] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.398035] pci 0000:14:00.0: Signaling PME through PCIe PME interrupt
[ 0.398039] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.398065] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.398106] pciehp 0000:00:05.0:pcie04: HPC vendor_id 1002 device_id 7915 ss_vid 1179 ss_did ff00
[ 0.398134] pciehp 0000:00:05.0:pcie04: service driver pciehp loaded
[ 0.398144] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.399947] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.402398] ACPI: AC Adapter [ACAD] (on-line)
[ 0.402486] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.402517] ACPI: Lid Switch [LID]
[ 0.402575] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.402580] ACPI: Power Button [PWRB]
[ 0.402649] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.402653] ACPI: Power Button [PWRF]
[ 0.403044] ACPI: processor limited to max C-state 1
[ 0.428258] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.428271] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.428304] ERST: Table is not found!
[ 0.428306] GHES: HEST is not enabled!
[ 0.428541] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.448047] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.513829] Freeing initrd memory: 13916k freed
[ 0.580606] Linux agpgart interface v0.103
[ 0.582924] brd: module loaded
[ 0.584174] loop: module loaded
[ 0.584425] ahci 0000:00:12.0: version 3.0
[ 0.584456] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.584494] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 0.584592] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.584597] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.585593] scsi0 : ahci
[ 0.585740] scsi1 : ahci
[ 0.585854] scsi2 : ahci
[ 0.585969] scsi3 : ahci
[ 0.586169] ata1: SATA max UDMA/133 abar m1024@0xcf5f6c00 port 0xcf5f6d00 irq 22
[ 0.586175] ata2: SATA max UDMA/133 abar m1024@0xcf5f6c00 port 0xcf5f6d80 irq 22
[ 0.586179] ata3: SATA max UDMA/133 abar m1024@0xcf5f6c00 port 0xcf5f6e00 irq 22
[ 0.586184] ata4: SATA max UDMA/133 abar m1024@0xcf5f6c00 port 0xcf5f6e80 irq 22
[ 0.586509] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.586558] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 0.587138] Fixed MDIO Bus: probed
[ 0.587173] tun: Universal TUN/TAP device driver, 1.6
[ 0.587175] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.587276] PPP generic driver version 2.4.2
[ 0.587458] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.587493] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.587517] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 0.587627] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 0.587665] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 0.587681] ehci_hcd 0000:00:13.5: debug port 1
[ 0.587712] ehci_hcd 0000:00:13.5: irq 19, io mem 0xcf5f6800
[ 0.596034] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 0.596239] hub 1-0:1.0: USB hub found
[ 0.596245] hub 1-0:1.0: 10 ports detected
[ 0.596402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.596435] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.596451] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.596526] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.596556] ohci_hcd 0000:00:13.0: irq 16, io mem 0xcf5fb000
[ 0.652216] hub 2-0:1.0: USB hub found
[ 0.652227] hub 2-0:1.0: 2 ports detected
[ 0.652345] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.652361] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.652433] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.652465] ohci_hcd 0000:00:13.1: irq 17, io mem 0xcf5fa000
[ 0.708211] hub 3-0:1.0: USB hub found
[ 0.708222] hub 3-0:1.0: 2 ports detected
[ 0.708332] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.708347] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 0.708427] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.708456] ohci_hcd 0000:00:13.2: irq 18, io mem 0xcf5f9000
[ 0.764211] hub 4-0:1.0: USB hub found
[ 0.764221] hub 4-0:1.0: 2 ports detected
[ 0.764334] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.764351] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 0.764425] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 0.764443] ohci_hcd 0000:00:13.3: irq 17, io mem 0xcf5f8000
[ 0.820220] hub 5-0:1.0: USB hub found
[ 0.820231] hub 5-0:1.0: 2 ports detected
[ 0.820343] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.820359] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 0.820433] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 0.820452] ohci_hcd 0000:00:13.4: irq 18, io mem 0xcf5f7000
[ 0.876214] hub 6-0:1.0: USB hub found
[ 0.876225] hub 6-0:1.0: 2 ports detected
[ 0.876341] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.876434] usbcore: registered new interface driver libusual
[ 0.876487] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.909585] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.909592] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.909652] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.909695] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.909730] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.909832] mousedev: PS/2 mouse device common for all mice
[ 0.913434] rtc_cmos 00:04: RTC can wake from S4
[ 0.913577] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.913608] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.913728] device-mapper: uevent: version 1.0.3
[ 0.913836] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.913846] cpuidle: using governor ladder
[ 0.913848] cpuidle: using governor menu
[ 0.913851] EFI Variables Facility v0.08 2004-May-17
[ 0.914155] TCP cubic registered
[ 0.914310] NET: Registered protocol family 10
[ 0.915069] NET: Registered protocol family 17
[ 0.915075] Registering the dns_resolver key type
[ 0.915271] PM: Hibernation image not present or could not be loaded.
[ 0.915286] registered taskstats version 1
[ 0.924878] Magic number: 9:505:237
[ 0.925008] rtc_cmos 00:04: setting system clock to 2013-04-22 16:13:16 UTC (1366647196)
[ 0.925018] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00)
[ 0.925064] powernow-k8: fid 0xc (2000 MHz), vid 0x12
[ 0.925067] powernow-k8: fid 0xa (1800 MHz), vid 0x13
[ 0.925070] powernow-k8: fid 0x8 (1600 MHz), vid 0x14
[ 0.925072] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
[ 0.925168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.925171] EDD information not available.
[ 0.938130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.076050] usb 1-8: new high-speed USB device number 4 using ehci_hcd
[ 1.304032] ata1: softreset failed (device not ready)
[ 1.304036] ata1: applying PMP SRST workaround and retrying
[ 1.476048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.488034] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[ 1.876565] ata1.00: ATA-8: TOSHIBA MK2046GSX, LB013M, max UDMA/100
[ 1.876569] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.876573] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.877494] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.877498] ata1.00: configured for UDMA/100
[ 1.877701] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2046GS LB01 PQ: 0 ANSI: 5
[ 1.877884] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.877900] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.877955] sd 0:0:0:0: [sda] Write Protect is off
[ 1.877959] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.877990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.920037] usb 2-2: new full-speed USB device number 3 using ohci_hcd
[ 2.012219] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 2.012948] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.015014] Freeing unused kernel memory: 920k freed
[ 2.015504] Write protecting the kernel read-only data: 12288k
[ 2.022350] Freeing unused kernel memory: 1600k freed
[ 2.028177] Freeing unused kernel memory: 1192k freed
[ 2.055170] udevd[94]: starting version 175
[ 2.082087] usb 2-2: config 1 has an invalid interface number: 4 but max is 3
[ 2.082093] usb 2-2: config 1 has no interface number 3
[ 2.102248] Initializing USB Mass Storage driver...
[ 2.108100] scsi4 : usb-storage 2-2:1.0
[ 2.108243] usbcore: registered new interface driver usb-storage
[ 2.108246] USB Mass Storage support registered.
[ 2.134063] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.134097] r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.134138] r8169 0000:0e:00.0: setting latency timer to 64
[ 2.134201] r8169 0000:0e:00.0: irq 44 for MSI/MSI-X
[ 2.134765] r8169 0000:0e:00.0: eth0: RTL8101e at 0xffffc90000308000, 00:1b:38:b4:3c:5a, XID 94200000 IRQ 44
[ 2.156753] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input4
[ 2.160431] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-1/input0
[ 2.161107] scsi5 : pata_atiixp
[ 2.164071] scsi6 : pata_atiixp
[ 2.164741] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 2.164744] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 2.165246] input: AC209N AC309N as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.4/input/input5
[ 2.165364] generic-usb 0003:E0B6:0811.0002: input,hidraw1: USB HID v2.01 Device [AC209N AC309N ] on usb-0000:00:13.0-2/input4
[ 2.165390] usbcore: registered new interface driver usbhid
[ 2.165393] usbhid: USB HID core driver
[ 2.199881] sdhci: Secure Digital Host Controller Interface driver
[ 2.199885] sdhci: Copyright(c) Pierre Ossman
[ 2.328511] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PW03, max UDMA/33
[ 2.344449] ata5.00: configured for UDMA/33
[ 2.350188] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PW03 PQ: 0 ANSI: 5
[ 2.355442] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.355446] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.355618] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.355782] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.356447] sdhci-pci 0000:1a:04.3: SDHCI controller found [104c:803c] (rev 0)
[ 2.356472] sdhci-pci 0000:1a:04.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.356524] mmc0: no vmmc regulator found
[ 2.356565] Registered led device: mmc0::
[ 2.357613] mmc0: SDHCI controller on PCI [0000:1a:04.3] using DMA
[ 2.360910] firewire_ohci 0000:1a:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.416118] firewire_ohci: Added fw-ohci device 0000:1a:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 2.736485] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.916169] firewire_core: created device fw0: GUID 00023f7cc0409591, S400
[ 3.115100] scsi scan: INQUIRY result too short (5), using 36
[ 3.115109] scsi 4:0:0:0: Direct-Access eral MP3 PLAYER 1.00 PQ: 0 ANSI: 2
[ 3.115848] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.125091] sd 4:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
[ 3.131084] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.131088] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3.137087] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.137090] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.173085] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.173088] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.182091] sdb: sdb1
[ 3.208087] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.208090] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.208093] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 15.391593] Adding 2928636k swap on /dev/sda5. Priority:-1 extents:1 across:2928636k
[ 15.399892] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.420832] udevd[345]: starting version 175
[ 15.485203] lp: driver loaded but no devices found
[ 15.589235] [drm] Initialized drm 1.1.0 20060810
[ 15.610029] wmi: Mapper loaded
[ 15.627693] cfg80211: Calling CRDA to update world regulatory domain
[ 15.633116] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 15.633258] input: Toshiba input device as /devices/virtual/input/input6
[ 15.635931] [drm] radeon defaulting to kernel modesetting.
[ 15.635936] [drm] radeon kernel modesetting enabled.
[ 15.637008] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 15.637017] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 15.637029] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.637038] radeon 0000:01:00.0: setting latency timer to 64
[ 15.637454] [drm] initializing kernel modesetting (RV630 0x1002:0x9581 0x1179:0xFF00).
[ 15.637480] [drm] register mmio base: 0xCFEF0000
[ 15.637482] [drm] register mmio size: 65536
[ 15.637638] ATOM BIOS: IALAA
[ 15.637683] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 15.637687] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 15.638130] [drm] Detected VRAM RAM=512M, BAR=256M
[ 15.638135] [drm] RAM width 128bits DDR
[ 15.639430] [TTM] Zone kernel: Available graphics memory: 1024992 kiB.
[ 15.639434] [TTM] Initializing pool allocator.
[ 15.639465] [drm] radeon: 512M of VRAM memory ready
[ 15.639467] [drm] radeon: 512M of GTT memory ready.
[ 15.639486] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 15.639488] [drm] Driver supports precise vblank timestamp query.
[ 15.639538] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 15.639545] radeon 0000:01:00.0: radeon: using MSI.
[ 15.639579] [drm] radeon: irq initialized.
[ 15.639585] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 15.641246] [drm] Loading RV630 Microcode
[ 15.689423] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.712951] Registered led device: toshiba::illumination
[ 15.714539] ath5k 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 15.714552] ath5k 0000:14:00.0: setting latency timer to 64
[ 15.714626] ath5k 0000:14:00.0: registered as 'phy0'
[ 15.718052] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 15.724317] acpi device:02: registered as cooling_device2
[ 15.724431] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[ 15.724495] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.847115] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 15.965972] type=1400 audit(1366647211.535:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=580 comm="apparmor_parser"
[ 15.966608] type=1400 audit(1366647211.535:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser"
[ 15.966967] type=1400 audit(1366647211.535:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser"
[ 16.106298] MCE: In-kernel MCE decoding enabled.
[ 16.109732] EDAC MC: Ver: 2.1.0
[ 16.140679] Linux video capture interface: v2.00
[ 16.147903] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 16.148168] AMD64 EDAC driver v3.4.0
[ 16.166119] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input8
[ 16.166913] usbcore: registered new interface driver uvcvideo
[ 16.166917] USB Video Class driver (1.1.1)
[ 16.217340] ath: EEPROM regdomain: 0x65
[ 16.217344] ath: EEPROM indicates we should expect a direct regpair map
[ 16.217350] ath: Country alpha2 being used: 00
[ 16.217352] ath: Regpair used: 0x65
[ 16.219933] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219940] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219943] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219947] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219949] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219953] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219956] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219959] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219961] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219965] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219967] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219971] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219973] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219977] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219979] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219983] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219985] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219988] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219991] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219994] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219997] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 16.220056] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.220059] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 16.220063] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.220066] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 16.220069] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.220072] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 16.222319] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.222646] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 16.222735] yenta_cardbus 0000:1a:04.0: CardBus bridge found [1179:ff00]
[ 16.222757] yenta_cardbus 0000:1a:04.0: Enabling burst memory read transactions
[ 16.222764] yenta_cardbus 0000:1a:04.0: Using CSCINT to route CSC interrupts to PCI
[ 16.222766] yenta_cardbus 0000:1a:04.0: Routing CardBus interrupts to PCI
[ 16.222773] yenta_cardbus 0000:1a:04.0: TI: mfunc 0x10a01b22, devctl 0x64
[ 16.226864] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 16.227028] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 16.227264] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 16.229027] EDAC amd64: DRAM ECC disabled.
[ 16.229041] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.229042] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.229044] (Note that use of the override may cause unknown side effects.)
[ 16.229238] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.241765] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.242453] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 16.255637] device-mapper: multipath: version 1.3.0 loaded
[ 16.262109] usbcore: registered new interface driver snd-usb-audio
[ 16.314980] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 16.316159] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 16.452865] yenta_cardbus 0000:1a:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 16.452871] yenta_cardbus 0000:1a:04.0: Socket status: 30000006
[ 16.452877] pci_bus 0000:1a: Raising subordinate bus# of parent bus (#1a) from #1b to #1e
[ 16.452888] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 16.452893] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge window: [mem 0xcfa00000-0xcfafffff]
[ 16.452897] pcmcia_socket pcmcia_socket0: cs: memory probe 0xcfa00000-0xcfafffff: excluding 0xcfaf0000-0xcfafffff
[ 16.452914] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref]
[ 16.452918] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff
[ 16.472123] tifm_7xx1 0000:1a:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 16.575294] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.575300] cfg80211: World regulatory domain updated:
[ 16.575302] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.575306] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.575309] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.575312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.575315] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.575318] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.635668] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 16.635742] radeon 0000:01:00.0: WB enabled
[ 16.660952] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 16.667184] [drm] ring test succeeded in 1 usecs
[ 16.667321] [drm] radeon: ib pool ready.
[ 16.667408] [drm] ib test succeeded in 0 usecs
[ 16.667801] [drm] Radeon Display Connectors
[ 16.667804] [drm] Connector 0:
[ 16.667806] [drm] VGA
[ 16.667809] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 16.667811] [drm] Encoders:
[ 16.667813] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 16.667815] [drm] Connector 1:
[ 16.667816] [drm] HDMI-A
[ 16.667818] [drm] HPD1
[ 16.667821] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 16.667823] [drm] Encoders:
[ 16.667824] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 16.667826] [drm] Connector 2:
[ 16.667828] [drm] DIN
[ 16.667829] [drm] Encoders:
[ 16.667831] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 16.667833] [drm] Connector 3:
[ 16.667834] [drm] LVDS
[ 16.667837] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
[ 16.667839] [drm] Encoders:
[ 16.667840] [drm] LCD1: INTERNAL_LVTM1
[ 16.667853] [drm] Internal thermal controller without fan control
[ 16.667898] [drm] radeon: power management initialized
[ 16.701898] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 16.701930] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 16.701960] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 17.177548] init: failsafe main process (852) killed by TERM signal
[ 17.267686] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d/0x0
[ 17.267695] psmouse serio1: synaptics: Toshiba Satellite A210 detected, limiting rate to 40pps.
[ 17.367386] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 17.493569] [drm] fb mappable at 0xD0142000
[ 17.493573] [drm] vram apper at 0xD0000000
[ 17.493575] [drm] size 4096000
[ 17.493577] [drm] fb depth is 24
[ 17.493579] [drm] pitch is 5120
[ 17.493784] fbcon: radeondrmfb (fb0) is primary device
[ 17.494041] Console: switching to colour frame buffer device 160x50
[ 17.494074] fb0: radeondrmfb frame buffer device
[ 17.494076] drm: registered panic notifier
[ 17.494087] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 17.494986] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 17.495076] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 17.495108] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 17.545516] Bluetooth: Core ver 2.16
[ 17.545595] NET: Registered protocol family 31
[ 17.545598] Bluetooth: HCI device and connection manager initialized
[ 17.545602] Bluetooth: HCI socket layer initialized
[ 17.545605] Bluetooth: L2CAP socket layer initialized
[ 17.546033] Bluetooth: SCO socket layer initialized
[ 17.562039] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 17.562160] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12
[ 17.571971] ppdev: user-space parallel port driver
[ 17.633417] type=1400 audit(1366647213.203:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=973 comm="apparmor_parser"
[ 17.639510] type=1400 audit(1366647213.207:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=972 comm="apparmor_parser"
[ 17.650181] type=1400 audit(1366647213.219:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=973 comm="apparmor_parser"
[ 17.650524] type=1400 audit(1366647213.219:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=973 comm="apparmor_parser"
[ 17.687874] type=1400 audit(1366647213.255:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=986 comm="apparmor_parser"
[ 17.691697] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.691702] Bluetooth: BNEP filters: protocol multicast
[ 17.698243] type=1400 audit(1366647213.267:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=991 comm="apparmor_parser"
[ 17.698961] type=1400 audit(1366647213.267:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=991 comm="apparmor_parser"
[ 17.700069] Bluetooth: RFCOMM TTY layer initialized
[ 17.700075] Bluetooth: RFCOMM socket layer initialized
[ 17.700077] Bluetooth: RFCOMM ver 1.11
[ 17.793779] r8169 0000:0e:00.0: eth0: link down
[ 17.793790] r8169 0000:0e:00.0: eth0: link down
[ 17.794202] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.794784] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.799078] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.201325] i2c i2c-2: sendbytes: NAK bailout.
[ 19.388091] i2c i2c-2: sendbytes: NAK bailout.
[ 19.395471] r8169 0000:0e:00.0: eth0: link up
[ 19.395845] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.287774] i2c i2c-2: sendbytes: NAK bailout.
[ 30.320014] eth0: no IPv6 routers present
[ 32.532097] i2c i2c-2: sendbytes: NAK bailout.
[ 55.932078] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[ 56.067384] scsi7 : usb-storage 1-3:1.0
[ 57.065337] scsi 7:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 0 CCS
[ 57.067368] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 57.465610] sd 7:0:0:0: [sdc] 7870464 512-byte logical blocks: (4.02 GB/3.75 GiB)
[ 57.466211] sd 7:0:0:0: [sdc] Write Protect is off
[ 57.466222] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 57.466706] sd 7:0:0:0: [sdc] No Caching mode page present
[ 57.466716] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 57.471832] sd 7:0:0:0: [sdc] No Caching mode page present
[ 57.471845] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 57.472496] sdc: sdc1
[ 57.477321] sd 7:0:0:0: [sdc] No Caching mode page present
[ 57.477333] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 57.477343] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 174.862134] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 174.871754] SGI XFS Quota Management subsystem
[ 174.911061] JFS: nTxBlock = 8192, nTxLock = 65536
[ 174.978986] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 175.060211] QNX4 filesystem 0.2.3 registered.
[ 175.192749] Btrfs loaded
[ 191.613773] i2c i2c-2: sendbytes: NAK bailout.
[ 293.558364] i2c i2c-2: sendbytes: NAK bailout.
[ 303.714508] i2c i2c-2: sendbytes: NAK bailout.
[ 598.737638] i2c i2c-2: sendbytes: NAK bailout.
[ 690.416046] i2c i2c-2: sendbytes: NAK bailout.
[ 771.792066] i2c i2c-2: sendbytes: NAK bailout.
[ 822.607724] i2c i2c-2: sendbytes: NAK bailout.
[ 1319.973849] i2c i2c-2: sendbytes: NAK bailout.
[ 1634.340241] i2c i2c-2: sendbytes: NAK bailout.
[ 2212.354945] i2c i2c-2: sendbytes: NAK bailout.
[ 2719.299517] i2c i2c-2: sendbytes: NAK bailout.
[ 2931.875943] i2c i2c-2: sendbytes: NAK bailout.
[ 3002.814529] i2c i2c-2: sendbytes: NAK bailout.
[ 3337.476758] i2c i2c-2: sendbytes: NAK bailout.
[ 3727.084221] usb 2-2: USB disconnect, device number 3
[ 3734.220065] usb 2-2: new full-speed USB device number 4 using ohci_hcd
[ 3734.360051] usb 2-2: device descriptor read/64, error -62
[ 3734.604049] usb 2-2: device descriptor read/64, error -62
[ 3734.844086] usb 2-2: new full-speed USB device number 5 using ohci_hcd
[ 3735.370707] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3735.376611] usbcore: registered new interface driver btusb
[ 3743.143885] i2c i2c-2: sendbytes: NAK bailout.
[ 3753.231963] i2c i2c-2: sendbytes: NAK bailout.
[ 3773.497692] i2c i2c-2: sendbytes: NAK bailout.
[ 3803.844883] i2c i2c-2: sendbytes: NAK bailout.
[ 3844.324040] i2c i2c-2: sendbytes: NAK bailout.
[ 3864.536498] i2c i2c-2: sendbytes: NAK bailout.
[ 3935.492996] i2c i2c-2: sendbytes: NAK bailout.
[ 3986.138005] i2c i2c-2: sendbytes: NAK bailout.
[ 4026.629436] i2c i2c-2: sendbytes: NAK bailout.

Spoiler: show
1 Γνώσεις Linux: ⅜ Προγραμματισμού: ‱ ┃ Αγγλικών: ⅜
Desktop
Ubuntu-Mate 20.04
Intel Core i3-4150 CPU @ 3.50GHz ‖ RAM 7,5 GB ‖ ASRock H81M-DGS R2.0
Intel Device [8086:041e] {i915}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Άβαταρ μέλους
joe iwannou
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 1179
Εγγραφή: 25 Απρ 2010, 04:54
Τοποθεσία: Πες με τι δεν καταλαβαινεις
Εκτύπωση

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό sotos21 » 22 Απρ 2013, 20:43

Δεν είναι όλο joe iwannou πιστεύω να το ξέρεις.
Off topic:
Προς τους αγαπημένους διαχειριστές, μπορεί κάποιος να σβήσει την μια από την διπλή δημοσίευση.
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 23.10 Mantic Minotaur 6.3.0-7-generic 64bit (el_GR.UTF-8, Unity:Unity7:ubuntu unity)
3 AMD Ryzen 7 7730U with Radeon Graphics ‖ RAM 15368 MiB ‖ASUS TN3604YA - ASUS Vivobook_S_Flip TN3604YA_TN3604YA
4 Advanced Micro Devices, Inc. [AMD/ATI] Barcelo [1002:15e7] {amdgpu}
5 wlp1s0: MEDIATEK Corp. Device [14c3:7922]
Άβαταρ μέλους
sotos21
Freedom
Freedom
 
Δημοσιεύσεις: 6304
Εγγραφή: 21 Φεβ 2011, 21:28
Τοποθεσία: Αθήνα
Εκτύπωση

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό joe iwannou » 22 Απρ 2013, 20:58

Κώδικας: Επιλογή όλων
1366647196)
[ 0.925018] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00)
[ 0.925064] powernow-k8: fid 0xc (2000 MHz), vid 0x12
[ 0.925067] powernow-k8: fid 0xa (1800 MHz), vid 0x13
[ 0.925070] powernow-k8: fid 0x8 (1600 MHz), vid 0x14
[ 0.925072] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
[ 0.925168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.925171] EDD information not available.
[ 0.938130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.076050] usb 1-8: new high-speed USB device number 4 using ehci_hcd
[ 1.304032] ata1: softreset failed (device not ready)
[ 1.304036] ata1: applying PMP SRST workaround and retrying
[ 1.476048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.488034] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[ 1.876565] ata1.00: ATA-8: TOSHIBA MK2046GSX, LB013M, max UDMA/100
[ 1.876569] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.876573] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.877494] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.877498] ata1.00: configured for UDMA/100
[ 1.877701] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2046GS LB01 PQ: 0 ANSI: 5
[ 1.877884] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.877900] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.877955] sd 0:0:0:0: [sda] Write Protect is off
[ 1.877959] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.877990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.920037] usb 2-2: new full-speed USB device number 3 using ohci_hcd
[ 2.012219] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 2.012948] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.015014] Freeing unused kernel memory: 920k freed
[ 2.015504] Write protecting the kernel read-only data: 12288k
[ 2.022350] Freeing unused kernel memory: 1600k freed
[ 2.028177] Freeing unused kernel memory: 1192k freed
[ 2.055170] udevd[94]: starting version 175
[ 2.082087] usb 2-2: config 1 has an invalid interface number: 4 but max is 3
[ 2.082093] usb 2-2: config 1 has no interface number 3
[ 2.102248] Initializing USB Mass Storage driver...
[ 2.108100] scsi4 : usb-storage 2-2:1.0
[ 2.108243] usbcore: registered new interface driver usb-storage
[ 2.108246] USB Mass Storage support registered.
[ 2.134063] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.134097] r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.134138] r8169 0000:0e:00.0: setting latency timer to 64
[ 2.134201] r8169 0000:0e:00.0: irq 44 for MSI/MSI-X
[ 2.134765] r8169 0000:0e:00.0: eth0: RTL8101e at 0xffffc90000308000, 00:1b:38:b4:3c:5a, XID 94200000 IRQ 44
[ 2.156753] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input4
[ 2.160431] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-1/input0
[ 2.161107] scsi5 : pata_atiixp
[ 2.164071] scsi6 : pata_atiixp
[ 2.164741] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 2.164744] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 2.165246] input: AC209N AC309N as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.4/input/input5
[ 2.165364] generic-usb 0003:E0B6:0811.0002: input,hidraw1: USB HID v2.01 Device [AC209N AC309N ] on usb-0000:00:13.0-2/input4
[ 2.165390] usbcore: registered new interface driver usbhid
[ 2.165393] usbhid: USB HID core driver
[ 2.199881] sdhci: Secure Digital Host Controller Interface driver
[ 2.199885] sdhci: Copyright(c) Pierre Ossman
[ 2.328511] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PW03, max UDMA/33
[ 2.344449] ata5.00: configured for UDMA/33
[ 2.350188] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PW03 PQ: 0 ANSI: 5
[ 2.355442] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.355446] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.355618] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.355782] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.356447] sdhci-pci 0000:1a:04.3: SDHCI controller found [104c:803c] (rev 0)
[ 2.356472] sdhci-pci 0000:1a:04.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.356524] mmc0: no vmmc regulator found
[ 2.356565] Registered led device: mmc0::
[ 2.357613] mmc0: SDHCI controller on PCI [0000:1a:04.3] using DMA
[ 2.360910] firewire_ohci 0000:1a:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.416118] firewire_ohci: Added fw-ohci device 0000:1a:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 2.736485] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.916169] firewire_core: created device fw0: GUID 00023f7cc0409591, S400
[ 3.115100] scsi scan: INQUIRY result too short (5), using 36
[ 3.115109] scsi 4:0:0:0: Direct-Access eral MP3 PLAYER 1.00 PQ: 0 ANSI: 2
[ 3.115848] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.125091] sd 4:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
[ 3.131084] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.131088] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3.137087] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.137090] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.173085] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.173088] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.182091] sdb: sdb1
[ 3.208087] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.208090] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.208093] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 15.391593] Adding 2928636k swap on /dev/sda5. Priority:-1 extents:1 across:2928636k
[ 15.399892] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.420832] udevd[345]: starting version 175
[ 15.485203] lp: driver loaded but no devices found
[ 15.589235] [drm] Initialized drm 1.1.0 20060810
[ 15.610029] wmi: Mapper loaded
[ 15.627693] cfg80211: Calling CRDA to update world regulatory domain
[ 15.633116] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 15.633258] input: Toshiba input device as /devices/virtual/input/input6
[ 15.635931] [drm] radeon defaulting to kernel modesetting.
[ 15.635936] [drm] radeon kernel modesetting enabled.
[ 15.637008] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 15.637017] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 15.637029] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.637038] radeon 0000:01:00.0: setting latency timer to 64
[ 15.637454] [drm] initializing kernel modesetting (RV630 0x1002:0x9581 0x1179:0xFF00).
[ 15.637480] [drm] register mmio base: 0xCFEF0000
[ 15.637482] [drm] register mmio size: 65536
[ 15.637638] ATOM BIOS: IALAA
[ 15.637683] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 15.637687] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 15.638130] [drm] Detected VRAM RAM=512M, BAR=256M
[ 15.638135] [drm] RAM width 128bits DDR
[ 15.639430] [TTM] Zone kernel: Available graphics memory: 1024992 kiB.
[ 15.639434] [TTM] Initializing pool allocator.
[ 15.639465] [drm] radeon: 512M of VRAM memory ready
[ 15.639467] [drm] radeon: 512M of GTT memory ready.
[ 15.639486] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 15.639488] [drm] Driver supports precise vblank timestamp query.
[ 15.639538] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 15.639545] radeon 0000:01:00.0: radeon: using MSI.
[ 15.639579] [drm] radeon: irq initialized.
[ 15.639585] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 15.641246] [drm] Loading RV630 Microcode
[ 15.689423] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.712951] Registered led device: toshiba::illumination
[ 15.714539] ath5k 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 15.714552] ath5k 0000:14:00.0: setting latency timer to 64
[ 15.714626] ath5k 0000:14:00.0: registered as 'phy0'
[ 15.718052] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 15.724317] acpi device:02: registered as cooling_device2
[ 15.724431] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[ 15.724495] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.847115] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 15.965972] type=1400 audit(1366647211.535:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=580 comm="apparmor_parser"
[ 15.966608] type=1400 audit(1366647211.535:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser"
[ 15.966967] type=1400 audit(1366647211.535:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser"
[ 16.106298] MCE: In-kernel MCE decoding enabled.
[ 16.109732] EDAC MC: Ver: 2.1.0
[ 16.140679] Linux video capture interface: v2.00
[ 16.147903] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 16.148168] AMD64 EDAC driver v3.4.0
[ 16.166119] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input8
[ 16.166913] usbcore: registered new interface driver uvcvideo
[ 16.166917] USB Video Class driver (1.1.1)
[ 16.217340] ath: EEPROM regdomain: 0x65
[ 16.217344] ath: EEPROM indicates we should expect a direct regpair map
[ 16.217350] ath: Country alpha2 being used: 00
[ 16.217352] ath: Regpair used: 0x65
[ 16.219933] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219940] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219943] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219947] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219949] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219953] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219956] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219959] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219961] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219965] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219967] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219971] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219973] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219977] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219979] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219983] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219985] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219988] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219991] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219994] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219997] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 16.220056] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.220059] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 16.220063] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.220066] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 16.220069] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.220072] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 16.222319] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.222646] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 16.222735] yenta_cardbus 0000:1a:04.0: CardBus bridge found [1179:ff00]
[ 16.222757] yenta_cardbus 0000:1a:04.0: Enabling burst memory read transactions
[ 16.222764] yenta_cardbus 0000:1a:04.0: Using CSCINT to route CSC interrupts to PCI
[ 16.222766] yenta_cardbus 0000:1a:04.0: Routing CardBus interrupts to PCI
[ 16.222773] yenta_cardbus 0000:1a:04.0: TI: mfunc 0x10a01b22, devctl 0x64
[ 16.226864] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 16.227028] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 16.227264] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 16.229027] EDAC amd64: DRAM ECC disabled.
[ 16.229041] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.229042] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.229044] (Note that use of the override may cause unknown side effects.)
[ 16.229238] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.241765] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.242453] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 16.255637] device-mapper: multipath: version 1.3.0 loaded
[ 16.262109] usbcore: registered new interface driver snd-usb-audio
[ 16.314980] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 16.316159] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 16.452865] yenta_cardbus 0000:1a:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 16.452871] yenta_cardbus 0000:1a:04.0: Socket status: 30000006
[ 16.452877] pci_bus 0000:1a: Raising subordinate bus# of parent bus (#1a) from #1b to #1e
[ 16.452888] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 16.452893] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge window: [mem 0xcfa00000-0xcfafffff]
[ 16.452897] pcmcia_socket pcmcia_socket0: cs: memory probe 0xcfa00000-0xcfafffff: excluding 0xcfaf0000-0xcfafffff
[ 16.452914] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref]
[ 16.452918] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff
[ 16.472123] tifm_7xx1 0000:1a:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 16.575294] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.575300] cfg80211: World regulatory domain updated:
[ 16.575302] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.575306] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.575309] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.575312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.575315] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.575318] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.635668] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 16.635742] radeon 0000:01:00.0: WB enabled
[ 16.660952] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 16.667184] [drm] ring test succeeded in 1 usecs
[ 16.667321] [drm] radeon: ib pool ready.
[ 16.667408] [drm] ib test succeeded in 0 usecs
[ 16.667801] [drm] Radeon Display Connectors
[ 16.667804] [drm] Connector 0:
[ 16.667806] [drm] VGA
[ 16.667809] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 16.667811] [drm] Encoders:
[ 16.667813] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 16.667815] [drm] Connector 1:
[ 16.667816] [drm] HDMI-A
[ 16.667818] [drm] HPD1
[ 16.667821] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 16.667823] [drm] Encoders:
[ 16.667824] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 16.667826] [drm] Connector 2:
[ 16.667828] [drm] DIN
[ 16.667829] [drm] Encoders:
[ 16.667831] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 16.667833] [drm] Connector 3:
[ 16.667834] [drm] LVDS
[ 16.667837] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
[ 16.667839] [drm] Encoders:
[ 16.667840] [drm] LCD1: INTERNAL_LVTM1
[ 16.667853] [drm] Internal thermal controller without fan control
[ 16.667898] [drm] radeon: power management initialized
[ 16.701898] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 16.701930] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 16.701960] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 17.177548] init: failsafe main process (852) killed by TERM signal
[ 17.267686] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d/0x0
[ 17.267695] psmouse serio1: synaptics: Toshiba Satellite A210 detected, limiting rate to 40pps.
[ 17.367386] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 17.493569] [drm] fb mappable at 0xD0142000
[ 17.493573] [drm] vram apper at 0xD0000000
[ 17.493575] [drm] size 4096000
[ 17.493577] [drm] fb depth is 24
[ 17.493579] [drm] pitch is 5120
[ 17.493784] fbcon: radeondrmfb (fb0) is primary device
[ 17.494041] Console: switching to colour frame buffer device 160x50
[ 17.494074] fb0: radeondrmfb frame buffer device
[ 17.494076] drm: registered panic notifier
[ 17.494087] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 17.494986] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 17.495076] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 17.495108] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 17.545516] Bluetooth: Core ver 2.16
[ 17.545595] NET: Registered protocol family 31
[ 17.545598] Bluetooth: HCI device and connection manager initialized
[ 17.545602] Bluetooth: HCI socket layer initialized
[ 17.545605] Bluetooth: L2CAP socket layer initialized
[ 17.546033] Bluetooth: SCO socket layer initialized
[ 17.562039] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 17.562160] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12
[ 17.571971] ppdev: user-space parallel port driver
[ 17.633417] type=1400 audit(1366647213.203:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=973 comm="apparmor_parser"
[ 17.639510] type=1400 audit(1366647213.207:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=972 comm="apparmor_parser"
[ 17.650181] type=1400 audit(1366647213.219:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=973 comm="apparmor_parser"
[ 17.650524] type=1400 audit(1366647213.219:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=973 comm="apparmor_parser"
[ 17.687874] type=1400 audit(1366647213.255:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=986 comm="apparmor_parser"
[ 17.691697] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.691702] Bluetooth: BNEP filters: protocol multicast
[ 17.698243] type=1400 audit(1366647213.267:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=991 comm="apparmor_parser"
[ 17.698961] type=1400 audit(1366647213.267:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=991 comm="apparmor_parser"
[ 17.700069] Bluetooth: RFCOMM TTY layer initialized
[ 17.700075] Bluetooth: RFCOMM socket layer initialized
[ 17.700077] Bluetooth: RFCOMM ver 1.11
[ 17.793779] r8169 0000:0e:00.0: eth0: link down
[ 17.793790] r8169 0000:0e:00.0: eth0: link down
[ 17.794202] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.794784] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.799078] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.201325] i2c i2c-2: sendbytes: NAK bailout.
[ 19.388091] i2c i2c-2: sendbytes: NAK bailout.
[ 19.395471] r8169 0000:0e:00.0: eth0: link up
[ 19.395845] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.287774] i2c i2c-2: sendbytes: NAK bailout.
[ 30.320014] eth0: no IPv6 routers present
[ 32.532097] i2c i2c-2: sendbytes: NAK bailout.
[ 55.932078] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[ 56.067384] scsi7 : usb-storage 1-3:1.0
[ 57.065337] scsi 7:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 0 CCS
[ 57.067368] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 57.465610] sd 7:0:0:0: [sdc] 7870464 512-byte logical blocks: (4.02 GB/3.75 GiB)
[ 57.466211] sd 7:0:0:0: [sdc] Write Protect is off
[ 57.466222] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 57.466706] sd 7:0:0:0: [sdc] No Caching mode page present
[ 57.466716] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 57.471832] sd 7:0:0:0: [sdc] No Caching mode page present
[ 57.471845] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 57.472496] sdc: sdc1
[ 57.477321] sd 7:0:0:0: [sdc] No Caching mode page present
[ 57.477333] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 57.477343] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 174.862134] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 174.871754] SGI XFS Quota Management subsystem
[ 174.911061] JFS: nTxBlock = 8192, nTxLock = 65536
[ 174.978986] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 175.060211] QNX4 filesystem 0.2.3 registered.
[ 175.192749] Btrfs loaded
[ 191.613773] i2c i2c-2: sendbytes: NAK bailout.
[ 293.558364] i2c i2c-2: sendbytes: NAK bailout.
[ 303.714508] i2c i2c-2: sendbytes: NAK bailout.
[ 598.737638] i2c i2c-2: sendbytes: NAK bailout.
[ 690.416046] i2c i2c-2: sendbytes: NAK bailout.
[ 771.792066] i2c i2c-2: sendbytes: NAK bailout.
[ 822.607724] i2c i2c-2: sendbytes: NAK bailout.
[ 1319.973849] i2c i2c-2: sendbytes: NAK bailout.
[ 1634.340241] i2c i2c-2: sendbytes: NAK bailout.
[ 2212.354945] i2c i2c-2: sendbytes: NAK bailout.
[ 2719.299517] i2c i2c-2: sendbytes: NAK bailout.
[ 2931.875943] i2c i2c-2: sendbytes: NAK bailout.
[ 3002.814529] i2c i2c-2: sendbytes: NAK bailout.
[ 3337.476758] i2c i2c-2: sendbytes: NAK bailout.
[ 3727.084221] usb 2-2: USB disconnect, device number 3
[ 3734.220065] usb 2-2: new full-speed USB device number 4 using ohci_hcd
[ 3734.360051] usb 2-2: device descriptor read/64, error -62
[ 3734.604049] usb 2-2: device descriptor read/64, error -62
[ 3734.844086] usb 2-2: new full-speed USB device number 5 using ohci_hcd
[ 3735.370707] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3735.376611] usbcore: registered new interface driver btusb
[ 3743.143885] i2c i2c-2: sendbytes: NAK bailout.
[ 3753.231963] i2c i2c-2: sendbytes: NAK bailout.
[ 3773.497692] i2c i2c-2: sendbytes: NAK bailout.
[ 3803.844883] i2c i2c-2: sendbytes: NAK bailout.
[ 3844.324040] i2c i2c-2: sendbytes: NAK bailout.
[ 3864.536498] i2c i2c-2: sendbytes: NAK bailout.
[ 3935.492996] i2c i2c-2: sendbytes: NAK bailout.
[ 3986.138005] i2c i2c-2: sendbytes: NAK bailout.
[ 4026.629436] i2c i2c-2: sendbytes: NAK bailout.
[ 4107.781003] i2c i2c-2: sendbytes: NAK bailout.
[ 4138.116253] i2c i2c-2: sendbytes: NAK bailout.
[ 4148.170822] i2c i2c-2: sendbytes: NAK bailout.
[ 4168.377688] i2c i2c-2: sendbytes: NAK bailout.
[ 4178.438020] i2c i2c-2: sendbytes: NAK bailout.
[ 4208.773175] i2c i2c-2: sendbytes: NAK bailout.
[ 4228.964478] i2c i2c-2: sendbytes: NAK bailout.
[ 4239.012328] i2c i2c-2: sendbytes: NAK bailout.
[ 4259.203924] i2c i2c-2: sendbytes: NAK bailout.
[ 4279.395488] i2c i2c-2: sendbytes: NAK bailout.
[ 4299.587381] i2c i2c-2: sendbytes: NAK bailout.
[ 4319.766699] i2c i2c-2: sendbytes: NAK bailout.
[ 4329.828339] i2c i2c-2: sendbytes: NAK bailout.
[ 4400.762237] i2c i2c-2: sendbytes: NAK bailout.
[ 4420.998481] i2c i2c-2: sendbytes: NAK bailout.
[ 4512.198860] i2c i2c-2: sendbytes: NAK bailout.
[ 4583.142336] i2c i2c-2: sendbytes: NAK bailout.
[ 4593.190443] i2c i2c-2: sendbytes: NAK bailout.
[ 4623.526906] i2c i2c-2: sendbytes: NAK bailout.
[ 4643.739404] i2c i2c-2: sendbytes: NAK bailout.
[ 4704.539947] i2c i2c-2: sendbytes: NAK bailout.
[ 4755.193843] i2c i2c-2: sendbytes: NAK bailout.
[ 4826.150326] i2c i2c-2: sendbytes: NAK bailout.
[ 4846.363191] i2c i2c-2: sendbytes: NAK bailout.
[ 4856.422896] i2c i2c-2: sendbytes: NAK bailout.
[ 4896.903223] i2c i2c-2: sendbytes: NAK bailout.
[ 4906.951200] i2c i2c-2: sendbytes: NAK bailout.
[ 4927.141920] i2c i2c-2: sendbytes: NAK bailout.
[ 4998.073910] i2c i2c-2: sendbytes: NAK bailout.
[ 5008.134429] i2c i2c-2: sendbytes: NAK bailout.
[ 5119.686984] i2c i2c-2: sendbytes: NAK bailout.
[ 5129.735024] i2c i2c-2: sendbytes: NAK bailout.
[ 5200.666900] i2c i2c-2: sendbytes: NAK bailout.
[ 5251.319415] i2c i2c-2: sendbytes: NAK bailout.
[ 5281.705286] i2c i2c-2: sendbytes: NAK bailout.
[ 5423.558435] i2c i2c-2: sendbytes: NAK bailout.
[ 5464.070936] i2c i2c-2: sendbytes: NAK bailout.
[ 5484.295125] i2c i2c-2: sendbytes: NAK bailout.
[ 5504.487327] i2c i2c-2: sendbytes: NAK bailout.
[ 5524.742523] i2c i2c-2: sendbytes: NAK bailout.
[ 5545.004867] i2c i2c-2: sendbytes: NAK bailout.
[ 5565.261461] i2c i2c-2: sendbytes: NAK bailout.
[ 5585.445332] i2c i2c-2: sendbytes: NAK bailout.
[ 5605.707162] i2c i2c-2: sendbytes: NAK bailout.
[ 5625.861808] i2c i2c-2: sendbytes: NAK bailout.
[ 5646.022396] i2c i2c-2: sendbytes: NAK bailout.
[ 5676.325206] i2c i2c-2: sendbytes: NAK bailout.
[ 5686.392250] i2c i2c-2: sendbytes: NAK bailout.
[ 5706.596510] i2c i2c-2: sendbytes: NAK bailout.
[ 5726.788300] i2c i2c-2: sendbytes: NAK bailout.
[ 5736.855124] i2c i2c-2: sendbytes: NAK bailout.
[ 5758.633649] usb 2-2: USB disconnect, device number 5
[ 5762.492127] usb 2-2: new full-speed USB device number 6 using ohci_hcd
[ 5762.632066] usb 2-2: device descriptor read/64, error -62
[ 5828.068329] i2c i2c-2: sendbytes: NAK bailout.
[ 5959.844720] i2c i2c-2: sendbytes: NAK bailout.
[ 6051.050361] i2c i2c-2: sendbytes: NAK bailout.
Spoiler: show
1 Γνώσεις Linux: ⅜ Προγραμματισμού: ‱ ┃ Αγγλικών: ⅜
Desktop
Ubuntu-Mate 20.04
Intel Core i3-4150 CPU @ 3.50GHz ‖ RAM 7,5 GB ‖ ASRock H81M-DGS R2.0
Intel Device [8086:041e] {i915}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Άβαταρ μέλους
joe iwannou
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 1179
Εγγραφή: 25 Απρ 2010, 04:54
Τοποθεσία: Πες με τι δεν καταλαβαινεις
Εκτύπωση

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό joe iwannou » 22 Απρ 2013, 21:04

dimseg > file

0-700

Κώδικας: Επιλογή όλων
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-40-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #64-Ubuntu SMP Mon Mar 25 21:22:10 UTC 2013 (Ubuntu 3.2.0-40.64-generic 3.2.40)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-generic root=UUID=ac7bb0b8-95d1-49e8-85c2-e908ba16587c ro quiet splash pcie_aspm=force vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe70000 (usable)
[ 0.000000] BIOS-e820: 000000007fe70000 - 000000007fe83000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe83000 - 000000007fe85000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fe85000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: TOSHIBA Satellite A210/IALAA, BIOS V1.80 10/12/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7fe70 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7300] f7300
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fe70000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fe70000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fe70000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 364c2000 - 37259000
[ 0.000000] ACPI: RSDP 00000000000f7260 00024 (v02 TOSCPL)
[ 0.000000] ACPI: XSDT 000000007fe7aa18 00064 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000007fe828f7 000F4 (v03 TOSCPL Herring 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 000000007fe7aa7c 07E7B (v01 TOSCPL SB600 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007fe84fc0 00040
[ 0.000000] ACPI: TCPA 000000007fe82a5f 00032 (v02 TOSCPL 06040000 PTEC 00000000)
[ 0.000000] ACPI: SLIC 000000007fe82a91 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
[ 0.000000] ACPI: SSDT 000000007fe82c07 00206 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000007fe82e0d 00054 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000007fe82e61 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000007fe82e9d 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: ASF! 000000007fe82ed5 0012B (v32 DMA AMDTBL 06040000 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fe70000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007fe70000
[ 0.000000] NODE_DATA [000000007fe6b000 - 000000007fe6ffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007fe70
[ 0.000000] On node 0 totalpages: 523773
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8122 pages used for memmap
[ 0.000000] DMA32 zone: 511670 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515582
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-generic root=UUID=ac7bb0b8-95d1-49e8-85c2-e908ba16587c ro quiet splash pcie_aspm=force vt.handoff=7
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ dc00000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2032356k/2095552k available (6574k kernel code, 460k absent, 62736k reserved, 6629k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.057 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.11 BogoMIPS (lpj=7980228)
[ 0.008012] pid_max: default: 32768 minimum: 301
[ 0.008043] Security Framework initialized
[ 0.008062] AppArmor: AppArmor initialized
[ 0.008064] Yama: becoming mindful.
[ 0.008313] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009401] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.009976] Mount-cache hash table entries: 256
[ 0.010143] Initializing cgroup subsys cpuacct
[ 0.010150] Initializing cgroup subsys memory
[ 0.010161] Initializing cgroup subsys devices
[ 0.010163] Initializing cgroup subsys freezer
[ 0.010166] Initializing cgroup subsys blkio
[ 0.010174] Initializing cgroup subsys perf_event
[ 0.010211] tseg: 007ff00000
[ 0.010214] CPU: Physical Processor ID: 0
[ 0.010216] CPU: Processor Core ID: 0
[ 0.010219] mce: CPU supports 5 MCE banks
[ 0.010232] using AMD E400 aware idle routine
[ 0.013641] ACPI: Core revision 20110623
[ 0.013647] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.013794] ACPI: Forced DSDT copy: length 0x07E7B copied locally, original unmapped
[ 0.020014] ftrace: allocating 26565 entries in 105 pages
[ 0.024493] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.028001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.028001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.028001] ..... (found apic 0 pin 0) ...
[ 0.070720] ....... works.
[ 0.070722] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 0.072003] Performance Events: AMD PMU driver.
[ 0.072003] ... version: 0
[ 0.072003] ... bit width: 48
[ 0.072003] ... generic registers: 4
[ 0.072003] ... value mask: 0000ffffffffffff
[ 0.072003] ... max period: 00007fffffffffff
[ 0.072003] ... fixed-purpose events: 0
[ 0.072003] ... event mask: 000000000000000f
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] Booting Node 0, Processors #1 Ok.
[ 0.072003] smpboot cpu 1: start_ip = 98000
[ 0.156157] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156187] Brought up 2 CPUs
[ 0.156186] System has AMD C1E enabled
[ 0.156199] Total of 2 processors activated (7980.10 BogoMIPS).
[ 0.156186] Switch to broadcast mode on CPU1
[ 0.156791] Switch to broadcast mode on CPU0
[ 0.156791] devtmpfs: initialized
[ 0.157877] EVM: security.selinux
[ 0.157879] EVM: security.SMACK64
[ 0.157881] EVM: security.capability
[ 0.157956] PM: Registering ACPI NVS region at 7fe83000 (8192 bytes)
[ 0.157956] print_constraints: dummy:
[ 0.157956] RTC time: 16:13:15, date: 04/22/13
[ 0.157956] NET: Registered protocol family 16
[ 0.160076] Trying to unpack rootfs image as initramfs...
[ 0.157956] node 0 link 0: io port [1000, fffff]
[ 0.157956] TOM: 0000000080000000 aka 2048M
[ 0.157956] node 0 link 0: mmio [cfb00000, dfffffff]
[ 0.157956] node 0 link 0: mmio [cfa00000, cfafffff]
[ 0.157956] node 0 link 0: mmio [a0000, bffff]
[ 0.157956] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.157956] node 0 link 0: mmio [e0000000, efffffff]
[ 0.157956] node 0 link 0: mmio [80000000, cf9fffff]
[ 0.157956] bus: [00, ff] on node 0 link 0
[ 0.157956] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.157956] bus: 00 index 1 [mem 0x80000000-0xefffffff]
[ 0.157956] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.157956] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
[ 0.157956] ACPI: bus type pci registered
[ 0.157956] PCI: MMCONFIG for domain 0000 [bus 00-1a] at [mem 0xe0000000-0xe1afffff] (base 0xe0000000)
[ 0.157956] PCI: MMCONFIG at [mem 0xe0000000-0xe1afffff] reserved in E820
[ 0.158584] PCI: Using configuration type 1 for base access
[ 0.160044] bio: create slab <bio-0> at 0
[ 0.160164] ACPI: Added _OSI(Module Device)
[ 0.160167] ACPI: Added _OSI(Processor Device)
[ 0.160170] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.160172] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.161356] ACPI: EC: Look up EC in DSDT
[ 0.162064] ACPI Error: No handler for Region [ERAM] (ffff88007bf37ea0) [EmbeddedControl] (20110623/evregion-373)
[ 0.162071] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110623/exfldio-292)
[ 0.162077] ACPI Error: Method parse/execution failed [\_SB_.HTEV] (Node ffff88007bf32780), AE_NOT_EXIST (20110623/psparse-536)
[ 0.162087] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node ffff88007bf3c078), AE_NOT_EXIST (20110623/psparse-536)
[ 0.164395] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.176056] ACPI: Interpreter enabled
[ 0.176061] ACPI: (supports S0 S3 S4 S5)
[ 0.176084] ACPI: Using IOAPIC for interrupt routing
[ 0.176856] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.260471] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.260922] ACPI: EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62
[ 0.261117] ACPI: No dock devices found.
[ 0.261120] HEST: Table not found.
[ 0.261125] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.262146] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.264071] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.264076] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored)
[ 0.264079] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored)
[ 0.264082] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored)
[ 0.264086] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored)
[ 0.264089] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff] (ignored)
[ 0.264092] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff] (ignored)
[ 0.264096] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[ 0.264099] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
[ 0.264103] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.264106] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.264117] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600
[ 0.264156] pci 0000:00:02.0: [1002:7913] type 1 class 0x000604
[ 0.264193] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.264197] pci 0000:00:02.0: PME# disabled
[ 0.264220] pci 0000:00:05.0: [1002:7915] type 1 class 0x000604
[ 0.264255] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.264258] pci 0000:00:05.0: PME# disabled
[ 0.264274] pci 0000:00:06.0: [1002:7916] type 1 class 0x000604
[ 0.264309] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.264313] pci 0000:00:06.0: PME# disabled
[ 0.264332] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604
[ 0.264368] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.264371] pci 0000:00:07.0: PME# disabled
[ 0.264410] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
[ 0.264430] pci 0000:00:12.0: reg 10: [io 0x8440-0x8447]
[ 0.264441] pci 0000:00:12.0: reg 14: [io 0x8434-0x8437]
[ 0.264453] pci 0000:00:12.0: reg 18: [io 0x8438-0x843f]
[ 0.264465] pci 0000:00:12.0: reg 1c: [io 0x8430-0x8433]
[ 0.264476] pci 0000:00:12.0: reg 20: [io 0x8400-0x840f]
[ 0.264488] pci 0000:00:12.0: reg 24: [mem 0xcf5f6c00-0xcf5f6fff]
[ 0.264512] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.264555] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.264571] pci 0000:00:13.0: reg 10: [mem 0xcf5fb000-0xcf5fbfff]
[ 0.264647] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.264663] pci 0000:00:13.1: reg 10: [mem 0xcf5fa000-0xcf5fafff]
[ 0.264739] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.264755] pci 0000:00:13.2: reg 10: [mem 0xcf5f9000-0xcf5f9fff]
[ 0.264831] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.264846] pci 0000:00:13.3: reg 10: [mem 0xcf5f8000-0xcf5f8fff]
[ 0.264922] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.264938] pci 0000:00:13.4: reg 10: [mem 0xcf5f7000-0xcf5f7fff]
[ 0.265020] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.265042] pci 0000:00:13.5: reg 10: [mem 0xcf5f6800-0xcf5f68ff]
[ 0.265136] pci 0000:00:13.5: supports D1 D2
[ 0.265138] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.265143] pci 0000:00:13.5: PME# disabled
[ 0.265172] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.265197] pci 0000:00:14.0: reg 10: [io 0x8410-0x841f]
[ 0.265292] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.265308] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
[ 0.265320] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
[ 0.265331] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.265343] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.265354] pci 0000:00:14.1: reg 20: [io 0x8420-0x842f]
[ 0.265399] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.265424] pci 0000:00:14.2: reg 10: [mem 0xcf5fc000-0xcf5fffff 64bit]
[ 0.265500] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.265505] pci 0000:00:14.2: PME# disabled
[ 0.265521] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.265607] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.265663] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.265686] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.265707] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.265731] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.265763] PCI: peer root bus 00 res updated from pci conf
[ 0.265806] pci 0000:01:00.0: [1002:9581] type 0 class 0x000300
[ 0.265819] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.265828] pci 0000:01:00.0: reg 14: [io 0x9000-0x90ff]
[ 0.265837] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[ 0.265864] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.265899] pci 0000:01:00.0: supports D1 D2
[ 0.265922] pci 0000:01:00.1: [1002:aa08] type 0 class 0x000403
[ 0.265934] pci 0000:01:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
[ 0.266004] pci 0000:01:00.1: supports D1 D2
[ 0.276035] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.276040] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 0.276044] pci 0000:00:02.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.276049] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.276075] pci 0000:00:05.0: PCI bridge to [bus 08-0d]
[ 0.276125] pci 0000:0e:00.0: [10ec:8136] type 0 class 0x000200
[ 0.276141] pci 0000:0e:00.0: reg 10: [io 0xa000-0xa0ff]
[ 0.276168] pci 0000:0e:00.0: reg 18: [mem 0xcf8ff000-0xcf8fffff 64bit]
[ 0.276198] pci 0000:0e:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.276265] pci 0000:0e:00.0: supports D1 D2
[ 0.276268] pci 0000:0e:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.276273] pci 0000:0e:00.0: PME# disabled
[ 0.288030] pci 0000:00:06.0: PCI bridge to [bus 0e-0e]
[ 0.288034] pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
[ 0.288038] pci 0000:00:06.0: bridge window [mem 0xcf800000-0xcf8fffff]
[ 0.288082] pci 0000:14:00.0: [168c:001c] type 0 class 0x000200
[ 0.288102] pci 0000:14:00.0: reg 10: [mem 0xcfcf0000-0xcfcfffff 64bit]
[ 0.300030] pci 0000:00:07.0: PCI bridge to [bus 14-14]
[ 0.300035] pci 0000:00:07.0: bridge window [mem 0xcfc00000-0xcfcfffff]
[ 0.300075] pci 0000:1a:04.0: [104c:8039] type 2 class 0x000607
[ 0.300101] pci 0000:1a:04.0: reg 10: [mem 0xcfafb000-0xcfafbfff]
[ 0.300142] pci 0000:1a:04.0: supports D1 D2
[ 0.300145] pci 0000:1a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300151] pci 0000:1a:04.0: PME# disabled
[ 0.300176] pci 0000:1a:04.1: [104c:803a] type 0 class 0x000c00
[ 0.300202] pci 0000:1a:04.1: reg 10: [mem 0xcfaf9800-0xcfaf9fff]
[ 0.300217] pci 0000:1a:04.1: reg 14: [mem 0xcfafc000-0xcfafffff]
[ 0.300318] pci 0000:1a:04.1: supports D1 D2
[ 0.300320] pci 0000:1a:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.300326] pci 0000:1a:04.1: PME# disabled
[ 0.300352] pci 0000:1a:04.2: [104c:803b] type 0 class 0x000180
[ 0.300376] pci 0000:1a:04.2: reg 10: [mem 0xcfafa000-0xcfafafff]
[ 0.300483] pci 0000:1a:04.2: supports D1 D2
[ 0.300486] pci 0000:1a:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.300492] pci 0000:1a:04.2: PME# disabled
[ 0.300519] pci 0000:1a:04.3: [104c:803c] type 0 class 0x000805
[ 0.300543] pci 0000:1a:04.3: reg 10: [mem 0xcfaf9400-0xcfaf94ff]
[ 0.300650] pci 0000:1a:04.3: supports D1 D2
[ 0.300652] pci 0000:1a:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.300658] pci 0000:1a:04.3: PME# disabled
[ 0.300725] pci 0000:00:14.4: PCI bridge to [bus 1a-1b] (subtractive decode)
[ 0.300733] pci 0000:00:14.4: bridge window [mem 0xcfa00000-0xcfafffff]
[ 0.300739] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.300742] pci 0000:00:14.4: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
[ 0.300746] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.300749] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfcffffffff] (subtractive decode)
[ 0.300801] pci_bus 0000:1b: [bus 1b-1e] partially hidden behind transparent bridge 0000:1a [bus 1a-1b]
[ 0.300823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.300922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[ 0.300983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.301032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.301078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.301126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[ 0.301216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.301298] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.301328] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.308429] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.308483] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.308535] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.308588] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.308640] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.308692] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.308744] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.308795] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.308985] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.308993] vgaarb: loaded
[ 0.308995] vgaarb: bridge control possible 0000:01:00.0
[ 0.309153] i2c-core: driver [aat2870] using legacy suspend method
[ 0.309155] i2c-core: driver [aat2870] using legacy resume method
[ 0.309261] SCSI subsystem initialized
[ 0.312019] libata version 3.00 loaded.
[ 0.312019] usbcore: registered new interface driver usbfs
[ 0.312019] usbcore: registered new interface driver hub
[ 0.312019] usbcore: registered new device driver usb
[ 0.312019] PCI: Using ACPI for IRQ routing
[ 0.312019] PCI: pci_cache_line_size set to 64 bytes
[ 0.312019] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.312019] reserve RAM buffer: 000000007fe70000 - 000000007fffffff
[ 0.312019] NetLabel: Initializing
[ 0.312019] NetLabel: domain hash size = 128
[ 0.312019] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.312019] NetLabel: unlabeled traffic allowed by default
[ 0.312019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.312019] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.312088] Switching to clocksource hpet
[ 0.326919] AppArmor: AppArmor Filesystem Enabled
[ 0.326964] pnp: PnP ACPI init
[ 0.326991] ACPI: bus type pnp registered
[ 0.328217] pnp 00:00: [bus 00-ff]
[ 0.328221] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.328224] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.328227] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.328230] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.328233] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.328236] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.328240] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.328243] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.328246] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.328249] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.328252] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.328255] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.328258] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.328261] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.328264] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.328267] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.328270] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.328273] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.328276] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.328279] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.328282] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.328285] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.328288] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.328291] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.328294] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.328297] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.328300] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.328303] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.328306] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.328309] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.328397] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.328462] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.328465] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.328560] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.328564] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.328568] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.329025] pnp 00:02: [io 0x0000-0x001f]
[ 0.329028] pnp 00:02: [io 0x0080-0x008f]
[ 0.329031] pnp 00:02: [io 0x00c0-0x00df]
[ 0.329034] pnp 00:02: [dma 4]
[ 0.329083] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.329096] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.329114] pnp 00:03: [irq 13]
[ 0.329159] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.329173] pnp 00:04: [io 0x0070-0x0071]
[ 0.329186] pnp 00:04: [irq 8]
[ 0.329233] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.329245] pnp 00:05: [io 0x0061]
[ 0.329292] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.329307] pnp 00:06: [io 0x0060]
[ 0.329310] pnp 00:06: [io 0x0064]
[ 0.329319] pnp 00:06: [irq 1]
[ 0.329367] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.329385] pnp 00:07: [irq 12]
[ 0.329435] pnp 00:07: Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active)
[ 0.329454] pnp 00:08: [io 0x0022-0x0023]
[ 0.329457] pnp 00:08: [io 0x002e-0x002f]
[ 0.329460] pnp 00:08: [io 0x0072-0x0073]
[ 0.329462] pnp 00:08: [io 0x1080]
[ 0.329465] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.329467] pnp 00:08: [io 0x0092]
[ 0.329470] pnp 00:08: [io 0x0220-0x022f]
[ 0.329472] pnp 00:08: [io 0x040b]
[ 0.329475] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.329477] pnp 00:08: [io 0x04d6]
[ 0.329479] pnp 00:08: [io 0x0530-0x0537]
[ 0.329482] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.329485] pnp 00:08: [io 0x0c14]
[ 0.329487] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.329490] pnp 00:08: [io 0x0c6c]
[ 0.329492] pnp 00:08: [io 0x0c6f]
[ 0.329495] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.329497] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.329500] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.329502] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.329505] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.329507] pnp 00:08: [io 0x8000-0x805f]
[ 0.329510] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.329513] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.329516] pnp 00:08: [io 0x0f40-0x0f47]
[ 0.329518] pnp 00:08: [io 0x087f]
[ 0.329521] pnp 00:08: [io 0xfd60-0xfddf]
[ 0.329632] system 00:08: [io 0x1080] has been reserved
[ 0.329636] system 00:08: [io 0x0220-0x022f] has been reserved
[ 0.329639] system 00:08: [io 0x040b] has been reserved
[ 0.329643] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.329646] system 00:08: [io 0x04d6] has been reserved
[ 0.329650] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.329653] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.329656] system 00:08: [io 0x0c14] has been reserved
[ 0.329660] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.329663] system 00:08: [io 0x0c6c] has been reserved
[ 0.329667] system 00:08: [io 0x0c6f] has been reserved
[ 0.329670] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.329674] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.329681] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.329684] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.329688] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.329691] system 00:08: [io 0x8000-0x805f] has been reserved
[ 0.329695] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.329699] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.329703] system 00:08: [io 0x0f40-0x0f47] has been reserved
[ 0.329706] system 00:08: [io 0x087f] has been reserved
[ 0.329710] system 00:08: [io 0xfd60-0xfddf] has been reserved
[ 0.329714] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.329772] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.329775] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.329778] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.329868] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.329872] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.329876] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.329997] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.330046] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.348092] pnp: PnP ACPI: found 11 devices
[ 0.348094] ACPI: ACPI bus type pnp unregistered
[ 0.355137] PCI: max bus depth: 2 pci_try_num: 3
[ 0.355189] pci 0000:00:06.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
[ 0.355194] pci 0000:00:14.4: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.355200] pci 0000:00:14.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.355204] pci 0000:00:05.0: BAR 14: assigned [mem 0x80100000-0x802fffff]
[ 0.355208] pci 0000:00:05.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
[ 0.355213] pci 0000:00:05.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.355219] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.355223] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.355227] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 0.355231] pci 0000:00:02.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.355235] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.355240] pci 0000:00:05.0: PCI bridge to [bus 08-0d]
[ 0.355243] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
[ 0.355247] pci 0000:00:05.0: bridge window [mem 0x80100000-0x802fffff]
[ 0.355251] pci 0000:00:05.0: bridge window [mem 0x80300000-0x804fffff 64bit pref]
[ 0.355257] pci 0000:0e:00.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.355260] pci 0000:00:06.0: PCI bridge to [bus 0e-0e]
[ 0.355263] pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
[ 0.355267] pci 0000:00:06.0: bridge window [mem 0xcf800000-0xcf8fffff]
[ 0.355271] pci 0000:00:06.0: bridge window [mem 0x80000000-0x800fffff pref]
[ 0.355276] pci 0000:00:07.0: PCI bridge to [bus 14-14]
[ 0.355280] pci 0000:00:07.0: bridge window [mem 0xcfc00000-0xcfcfffff]
[ 0.355288] pci 0000:1a:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.355292] pci 0000:1a:04.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.355296] pci 0000:1a:04.0: BAR 14: assigned [io 0x2000-0x20ff]
[ 0.355299] pci 0000:1a:04.0: BAR 13: assigned [io 0x2400-0x24ff]
[ 0.355303] pci 0000:1a:04.0: CardBus bridge to [bus 1b-1e]
[ 0.355306] pci 0000:1a:04.0: bridge window [io 0x2400-0x24ff]
[ 0.355315] pci 0000:1a:04.0: bridge window [io 0x2000-0x20ff]
[ 0.355321] pci 0000:1a:04.0: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.355327] pci 0000:1a:04.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.355334] pci 0000:00:14.4: PCI bridge to [bus 1a-1b]
[ 0.355338] pci 0000:00:14.4: bridge window [io 0x2000-0x2fff]
[ 0.355344] pci 0000:00:14.4: bridge window [mem 0xcfa00000-0xcfafffff]
[ 0.355350] pci 0000:00:14.4: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.355367] pci 0000:00:02.0: setting latency timer to 64
[ 0.355373] pci 0000:00:05.0: enabling device (0000 -> 0003)
[ 0.355377] pci 0000:00:05.0: setting latency timer to 64
[ 0.355383] pci 0000:00:06.0: setting latency timer to 64
[ 0.355389] pci 0000:00:07.0: setting latency timer to 64
[ 0.355420] pci 0000:1a:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.355428] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.355431] pci_bus 0000:00: resource 5 [mem 0x80000000-0xefffffff]
[ 0.355434] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.355437] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfcffffffff]
[ 0.355440] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.355444] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.355447] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.355451] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.355454] pci_bus 0000:08: resource 1 [mem 0x80100000-0x802fffff]
[ 0.355457] pci_bus 0000:08: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
[ 0.355461] pci_bus 0000:0e: resource 0 [io 0xa000-0xafff]
[ 0.355464] pci_bus 0000:0e: resource 1 [mem 0xcf800000-0xcf8fffff]
[ 0.355467] pci_bus 0000:0e: resource 2 [mem 0x80000000-0x800fffff pref]
[ 0.355471] pci_bus 0000:14: resource 1 [mem 0xcfc00000-0xcfcfffff]
[ 0.355474] pci_bus 0000:1a: resource 0 [io 0x2000-0x2fff]
[ 0.355477] pci_bus 0000:1a: resource 1 [mem 0xcfa00000-0xcfafffff]
[ 0.355481] pci_bus 0000:1a: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.355484] pci_bus 0000:1a: resource 4 [io 0x0000-0xffff]
[ 0.355487] pci_bus 0000:1a: resource 5 [mem 0x80000000-0xefffffff]
[ 0.355490] pci_bus 0000:1a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.355494] pci_bus 0000:1a: resource 7 [mem 0xf0000000-0xfcffffffff]
[ 0.355497] pci_bus 0000:1b: resource 0 [io 0x2400-0x24ff]
[ 0.355500] pci_bus 0000:1b: resource 1 [io 0x2000-0x20ff]
[ 0.355503] pci_bus 0000:1b: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.355506] pci_bus 0000:1b: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.355563] NET: Registered protocol family 2
[ 0.355695] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.356717] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.358809] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.359356] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.359360] TCP reno registered
[ 0.359371] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.359398] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.359522] NET: Registered protocol family 1
[ 0.359582] pci 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.359614] pci 0000:00:13.0: PCI INT A disabled
[ 0.359628] pci 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.359645] pci 0000:00:13.1: PCI INT B disabled
[ 0.359659] pci 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.359675] pci 0000:00:13.2: PCI INT C disabled
[ 0.359685] pci 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.359701] pci 0000:00:13.3: PCI INT B disabled
[ 0.359711] pci 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.359727] pci 0000:00:13.4: PCI INT C disabled
[ 0.359741] pci 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.359759] pci 0000:00:13.5: PCI INT D disabled
[ 0.359794] pci 0000:01:00.0: Boot video device
[ 0.359822] PCI: CLS 32 bytes, default 64
[ 0.362314] audit: initializing netlink socket (disabled)
[ 0.362327] type=2000 audit(1366647194.356:1): initialized
[ 0.392427] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.395361] VFS: Disk quotas dquot_6.5.2
[ 0.395447] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.396219] fuse init (API version 7.17)
[ 0.396342] msgmni has been set to 3969
[ 0.396765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.396803] io scheduler noop registered
[ 0.396805] io scheduler deadline registered
[ 0.396852] io scheduler cfq registered (default)
[ 0.397063] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.397106] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.397239] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.397266] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.397669] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.397695] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 0.397790] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.397816] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[ 0.397953] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 0.397958] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.397960] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.397965] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 0.397984] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 0.397988] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 0.398006] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.398008] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
[ 0.398012] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.398032] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.398035] pci 0000:14:00.0: Signaling PME through PCIe PME interrupt
[ 0.398039] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.398065] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.398106] pciehp 0000:00:05.0:pcie04: HPC vendor_id 1002 device_id 7915 ss_vid 1179 ss_did ff00
[ 0.398134] pciehp 0000:00:05.0:pcie04: service driver pciehp loaded
[ 0.398144] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.399947] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.402398] ACPI: AC Adapter [ACAD] (on-line)
[ 0.402486] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.402517] ACPI: Lid Switch [LID]
[ 0.402575] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.402580] ACPI: Power Button [PWRB]
[ 0.402649] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.402653] ACPI: Power Button [PWRF]
[ 0.403044] ACPI: processor limited to max C-state 1
[ 0.428258] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.428271] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.428304] ERST: Table is not found!
[ 0.428306] GHES: HEST is not enabled!
[ 0.428541] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.448047] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.513829] Freeing initrd memory: 13916k freed
[ 0.580606] Linux agpgart interface v0.103
[ 0.582924] brd: module loaded
[ 0.584174] loop: module loaded
[ 0.584425] ahci 0000:00:12.0: version 3.0
[ 0.584456] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.584494] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 0.584592] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.584597] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.585593] scsi0 : ahci
[ 0.585740] scsi1 : ahci
[ 0.585854] scsi2 : ahci
[ 0.585969] scsi3 : ahci
[ 0.586169] ata1: SATA max UDMA/133 abar m1024@0xcf5f6c00 port 0xcf5f6d00 irq 22
[ 0.586175] ata2: SATA max UDMA/133 abar m1024@0xcf5f6c00 port 0xcf5f6d80 irq 22
[ 0.586179] ata3: SATA max UDMA/133 abar m1024@0xcf5f6c00 port 0xcf5f6e00 irq 22
[ 0.586184] ata4: SATA max UDMA/133 abar m1024@0xcf5f6c00 port 0xcf5f6e80 irq 22
[ 0.586509] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.586558] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 0.587138] Fixed MDIO Bus: probed
[ 0.587173] tun: Universal TUN/TAP device driver, 1.6
[ 0.587175] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.587276] PPP generic driver version 2.4.2
[ 0.587458] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.587493] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.587517] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 0.587627] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 0.587665] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 0.587681] ehci_hcd 0000:00:13.5: debug port 1
[ 0.587712] ehci_hcd 0000:00:13.5: irq 19, io mem 0xcf5f6800
[ 0.596034] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 0.596239] hub 1-0:1.0: USB hub found
[ 0.596245] hub 1-0:1.0: 10 ports detected
[ 0.596402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.596435] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.596451] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.596526] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.596556] ohci_hcd 0000:00:13.0: irq 16, io mem 0xcf5fb000
[ 0.652216] hub 2-0:1.0: USB hub found
[ 0.652227] hub 2-0:1.0: 2 ports detected
[ 0.652345] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.652361] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.652433] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.652465] ohci_hcd 0000:00:13.1: irq 17, io mem 0xcf5fa000
[ 0.708211] hub 3-0:1.0: USB hub found
[ 0.708222] hub 3-0:1.0: 2 ports detected
[ 0.708332] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.708347] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 0.708427] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.708456] ohci_hcd 0000:00:13.2: irq 18, io mem 0xcf5f9000
[ 0.764211] hub 4-0:1.0: USB hub found
[ 0.764221] hub 4-0:1.0: 2 ports detected
[ 0.764334] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.764351] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 0.764425] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
Τελευταία επεξεργασία από joe iwannou και 22 Απρ 2013, 21:08, έχει επεξεργασθεί 1 φορά/ες συνολικά
Spoiler: show
1 Γνώσεις Linux: ⅜ Προγραμματισμού: ‱ ┃ Αγγλικών: ⅜
Desktop
Ubuntu-Mate 20.04
Intel Core i3-4150 CPU @ 3.50GHz ‖ RAM 7,5 GB ‖ ASRock H81M-DGS R2.0
Intel Device [8086:041e] {i915}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Άβαταρ μέλους
joe iwannou
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 1179
Εγγραφή: 25 Απρ 2010, 04:54
Τοποθεσία: Πες με τι δεν καταλαβαινεις
Εκτύπωση

Re: Μαύρη οθόνη μετά την εκκίνηση (Mate-gnome fallback)

Δημοσίευσηαπό joe iwannou » 22 Απρ 2013, 21:06

700- τελος

Κώδικας: Επιλογή όλων
[ 0.764443] ohci_hcd 0000:00:13.3: irq 17, io mem 0xcf5f8000
[ 0.820220] hub 5-0:1.0: USB hub found
[ 0.820231] hub 5-0:1.0: 2 ports detected
[ 0.820343] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.820359] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 0.820433] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 0.820452] ohci_hcd 0000:00:13.4: irq 18, io mem 0xcf5f7000
[ 0.876214] hub 6-0:1.0: USB hub found
[ 0.876225] hub 6-0:1.0: 2 ports detected
[ 0.876341] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.876434] usbcore: registered new interface driver libusual
[ 0.876487] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.909585] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.909592] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.909652] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.909695] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.909730] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.909832] mousedev: PS/2 mouse device common for all mice
[ 0.913434] rtc_cmos 00:04: RTC can wake from S4
[ 0.913577] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.913608] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.913728] device-mapper: uevent: version 1.0.3
[ 0.913836] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.913846] cpuidle: using governor ladder
[ 0.913848] cpuidle: using governor menu
[ 0.913851] EFI Variables Facility v0.08 2004-May-17
[ 0.914155] TCP cubic registered
[ 0.914310] NET: Registered protocol family 10
[ 0.915069] NET: Registered protocol family 17
[ 0.915075] Registering the dns_resolver key type
[ 0.915271] PM: Hibernation image not present or could not be loaded.
[ 0.915286] registered taskstats version 1
[ 0.924878] Magic number: 9:505:237
[ 0.925008] rtc_cmos 00:04: setting system clock to 2013-04-22 16:13:16 UTC (1366647196)
[ 0.925018] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00)
[ 0.925064] powernow-k8: fid 0xc (2000 MHz), vid 0x12
[ 0.925067] powernow-k8: fid 0xa (1800 MHz), vid 0x13
[ 0.925070] powernow-k8: fid 0x8 (1600 MHz), vid 0x14
[ 0.925072] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
[ 0.925168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.925171] EDD information not available.
[ 0.938130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.076050] usb 1-8: new high-speed USB device number 4 using ehci_hcd
[ 1.304032] ata1: softreset failed (device not ready)
[ 1.304036] ata1: applying PMP SRST workaround and retrying
[ 1.476048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.488034] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[ 1.876565] ata1.00: ATA-8: TOSHIBA MK2046GSX, LB013M, max UDMA/100
[ 1.876569] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.876573] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.877494] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.877498] ata1.00: configured for UDMA/100
[ 1.877701] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2046GS LB01 PQ: 0 ANSI: 5
[ 1.877884] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.877900] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.877955] sd 0:0:0:0: [sda] Write Protect is off
[ 1.877959] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.877990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.920037] usb 2-2: new full-speed USB device number 3 using ohci_hcd
[ 2.012219] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 2.012948] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.015014] Freeing unused kernel memory: 920k freed
[ 2.015504] Write protecting the kernel read-only data: 12288k
[ 2.022350] Freeing unused kernel memory: 1600k freed
[ 2.028177] Freeing unused kernel memory: 1192k freed
[ 2.055170] udevd[94]: starting version 175
[ 2.082087] usb 2-2: config 1 has an invalid interface number: 4 but max is 3
[ 2.082093] usb 2-2: config 1 has no interface number 3
[ 2.102248] Initializing USB Mass Storage driver...
[ 2.108100] scsi4 : usb-storage 2-2:1.0
[ 2.108243] usbcore: registered new interface driver usb-storage
[ 2.108246] USB Mass Storage support registered.
[ 2.134063] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.134097] r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.134138] r8169 0000:0e:00.0: setting latency timer to 64
[ 2.134201] r8169 0000:0e:00.0: irq 44 for MSI/MSI-X
[ 2.134765] r8169 0000:0e:00.0: eth0: RTL8101e at 0xffffc90000308000, 00:1b:38:b4:3c:5a, XID 94200000 IRQ 44
[ 2.156753] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input4
[ 2.160431] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-1/input0
[ 2.161107] scsi5 : pata_atiixp
[ 2.164071] scsi6 : pata_atiixp
[ 2.164741] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 2.164744] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 2.165246] input: AC209N AC309N as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.4/input/input5
[ 2.165364] generic-usb 0003:E0B6:0811.0002: input,hidraw1: USB HID v2.01 Device [AC209N AC309N ] on usb-0000:00:13.0-2/input4
[ 2.165390] usbcore: registered new interface driver usbhid
[ 2.165393] usbhid: USB HID core driver
[ 2.199881] sdhci: Secure Digital Host Controller Interface driver
[ 2.199885] sdhci: Copyright(c) Pierre Ossman
[ 2.328511] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PW03, max UDMA/33
[ 2.344449] ata5.00: configured for UDMA/33
[ 2.350188] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PW03 PQ: 0 ANSI: 5
[ 2.355442] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.355446] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.355618] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.355782] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.356447] sdhci-pci 0000:1a:04.3: SDHCI controller found [104c:803c] (rev 0)
[ 2.356472] sdhci-pci 0000:1a:04.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.356524] mmc0: no vmmc regulator found
[ 2.356565] Registered led device: mmc0::
[ 2.357613] mmc0: SDHCI controller on PCI [0000:1a:04.3] using DMA
[ 2.360910] firewire_ohci 0000:1a:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.416118] firewire_ohci: Added fw-ohci device 0000:1a:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 2.736485] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.916169] firewire_core: created device fw0: GUID 00023f7cc0409591, S400
[ 3.115100] scsi scan: INQUIRY result too short (5), using 36
[ 3.115109] scsi 4:0:0:0: Direct-Access eral MP3 PLAYER 1.00 PQ: 0 ANSI: 2
[ 3.115848] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.125091] sd 4:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
[ 3.131084] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.131088] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3.137087] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.137090] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.173085] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.173088] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.182091] sdb: sdb1
[ 3.208087] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.208090] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.208093] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 15.391593] Adding 2928636k swap on /dev/sda5. Priority:-1 extents:1 across:2928636k
[ 15.399892] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.420832] udevd[345]: starting version 175
[ 15.485203] lp: driver loaded but no devices found
[ 15.589235] [drm] Initialized drm 1.1.0 20060810
[ 15.610029] wmi: Mapper loaded
[ 15.627693] cfg80211: Calling CRDA to update world regulatory domain
[ 15.633116] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 15.633258] input: Toshiba input device as /devices/virtual/input/input6
[ 15.635931] [drm] radeon defaulting to kernel modesetting.
[ 15.635936] [drm] radeon kernel modesetting enabled.
[ 15.637008] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 15.637017] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 15.637029] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.637038] radeon 0000:01:00.0: setting latency timer to 64
[ 15.637454] [drm] initializing kernel modesetting (RV630 0x1002:0x9581 0x1179:0xFF00).
[ 15.637480] [drm] register mmio base: 0xCFEF0000
[ 15.637482] [drm] register mmio size: 65536
[ 15.637638] ATOM BIOS: IALAA
[ 15.637683] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 15.637687] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 15.638130] [drm] Detected VRAM RAM=512M, BAR=256M
[ 15.638135] [drm] RAM width 128bits DDR
[ 15.639430] [TTM] Zone kernel: Available graphics memory: 1024992 kiB.
[ 15.639434] [TTM] Initializing pool allocator.
[ 15.639465] [drm] radeon: 512M of VRAM memory ready
[ 15.639467] [drm] radeon: 512M of GTT memory ready.
[ 15.639486] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 15.639488] [drm] Driver supports precise vblank timestamp query.
[ 15.639538] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 15.639545] radeon 0000:01:00.0: radeon: using MSI.
[ 15.639579] [drm] radeon: irq initialized.
[ 15.639585] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 15.641246] [drm] Loading RV630 Microcode
[ 15.689423] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.712951] Registered led device: toshiba::illumination
[ 15.714539] ath5k 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 15.714552] ath5k 0000:14:00.0: setting latency timer to 64
[ 15.714626] ath5k 0000:14:00.0: registered as 'phy0'
[ 15.718052] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 15.724317] acpi device:02: registered as cooling_device2
[ 15.724431] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[ 15.724495] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.847115] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 15.965972] type=1400 audit(1366647211.535:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=580 comm="apparmor_parser"
[ 15.966608] type=1400 audit(1366647211.535:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser"
[ 15.966967] type=1400 audit(1366647211.535:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser"
[ 16.106298] MCE: In-kernel MCE decoding enabled.
[ 16.109732] EDAC MC: Ver: 2.1.0
[ 16.140679] Linux video capture interface: v2.00
[ 16.147903] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 16.148168] AMD64 EDAC driver v3.4.0
[ 16.166119] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input8
[ 16.166913] usbcore: registered new interface driver uvcvideo
[ 16.166917] USB Video Class driver (1.1.1)
[ 16.217340] ath: EEPROM regdomain: 0x65
[ 16.217344] ath: EEPROM indicates we should expect a direct regpair map
[ 16.217350] ath: Country alpha2 being used: 00
[ 16.217352] ath: Regpair used: 0x65
[ 16.219933] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219940] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219943] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219947] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219949] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219953] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219956] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219959] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219961] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219965] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219967] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219971] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219973] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219977] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219979] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219983] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219985] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219988] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219991] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 16.219994] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.219997] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 16.220056] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.220059] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 16.220063] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.220066] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 16.220069] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.220072] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 16.222319] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.222646] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 16.222735] yenta_cardbus 0000:1a:04.0: CardBus bridge found [1179:ff00]
[ 16.222757] yenta_cardbus 0000:1a:04.0: Enabling burst memory read transactions
[ 16.222764] yenta_cardbus 0000:1a:04.0: Using CSCINT to route CSC interrupts to PCI
[ 16.222766] yenta_cardbus 0000:1a:04.0: Routing CardBus interrupts to PCI
[ 16.222773] yenta_cardbus 0000:1a:04.0: TI: mfunc 0x10a01b22, devctl 0x64
[ 16.226864] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 16.227028] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 16.227264] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 16.229027] EDAC amd64: DRAM ECC disabled.
[ 16.229041] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.229042] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.229044] (Note that use of the override may cause unknown side effects.)
[ 16.229238] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.241765] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.242453] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 16.255637] device-mapper: multipath: version 1.3.0 loaded
[ 16.262109] usbcore: registered new interface driver snd-usb-audio
[ 16.314980] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 16.316159] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 16.452865] yenta_cardbus 0000:1a:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 16.452871] yenta_cardbus 0000:1a:04.0: Socket status: 30000006
[ 16.452877] pci_bus 0000:1a: Raising subordinate bus# of parent bus (#1a) from #1b to #1e
[ 16.452888] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 16.452893] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge window: [mem 0xcfa00000-0xcfafffff]
[ 16.452897] pcmcia_socket pcmcia_socket0: cs: memory probe 0xcfa00000-0xcfafffff: excluding 0xcfaf0000-0xcfafffff
[ 16.452914] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref]
[ 16.452918] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff
[ 16.472123] tifm_7xx1 0000:1a:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 16.575294] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.575300] cfg80211: World regulatory domain updated:
[ 16.575302] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.575306] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.575309] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.575312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.575315] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.575318] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.635668] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 16.635742] radeon 0000:01:00.0: WB enabled
[ 16.660952] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 16.667184] [drm] ring test succeeded in 1 usecs
[ 16.667321] [drm] radeon: ib pool ready.
[ 16.667408] [drm] ib test succeeded in 0 usecs
[ 16.667801] [drm] Radeon Display Connectors
[ 16.667804] [drm] Connector 0:
[ 16.667806] [drm] VGA
[ 16.667809] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 16.667811] [drm] Encoders:
[ 16.667813] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 16.667815] [drm] Connector 1:
[ 16.667816] [drm] HDMI-A
[ 16.667818] [drm] HPD1
[ 16.667821] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 16.667823] [drm] Encoders:
[ 16.667824] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 16.667826] [drm] Connector 2:
[ 16.667828] [drm] DIN
[ 16.667829] [drm] Encoders:
[ 16.667831] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 16.667833] [drm] Connector 3:
[ 16.667834] [drm] LVDS
[ 16.667837] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
[ 16.667839] [drm] Encoders:
[ 16.667840] [drm] LCD1: INTERNAL_LVTM1
[ 16.667853] [drm] Internal thermal controller without fan control
[ 16.667898] [drm] radeon: power management initialized
[ 16.701898] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 16.701930] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 16.701960] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 17.177548] init: failsafe main process (852) killed by TERM signal
[ 17.267686] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d/0x0
[ 17.267695] psmouse serio1: synaptics: Toshiba Satellite A210 detected, limiting rate to 40pps.
[ 17.367386] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 17.493569] [drm] fb mappable at 0xD0142000
[ 17.493573] [drm] vram apper at 0xD0000000
[ 17.493575] [drm] size 4096000
[ 17.493577] [drm] fb depth is 24
[ 17.493579] [drm] pitch is 5120
[ 17.493784] fbcon: radeondrmfb (fb0) is primary device
[ 17.494041] Console: switching to colour frame buffer device 160x50
[ 17.494074] fb0: radeondrmfb frame buffer device
[ 17.494076] drm: registered panic notifier
[ 17.494087] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 17.494986] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 17.495076] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 17.495108] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 17.545516] Bluetooth: Core ver 2.16
[ 17.545595] NET: Registered protocol family 31
[ 17.545598] Bluetooth: HCI device and connection manager initialized
[ 17.545602] Bluetooth: HCI socket layer initialized
[ 17.545605] Bluetooth: L2CAP socket layer initialized
[ 17.546033] Bluetooth: SCO socket layer initialized
[ 17.562039] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 17.562160] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12
[ 17.571971] ppdev: user-space parallel port driver
[ 17.633417] type=1400 audit(1366647213.203:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=973 comm="apparmor_parser"
[ 17.639510] type=1400 audit(1366647213.207:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=972 comm="apparmor_parser"
[ 17.650181] type=1400 audit(1366647213.219:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=973 comm="apparmor_parser"
[ 17.650524] type=1400 audit(1366647213.219:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=973 comm="apparmor_parser"
[ 17.687874] type=1400 audit(1366647213.255:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=986 comm="apparmor_parser"
[ 17.691697] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.691702] Bluetooth: BNEP filters: protocol multicast
[ 17.698243] type=1400 audit(1366647213.267:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=991 comm="apparmor_parser"
[ 17.698961] type=1400 audit(1366647213.267:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=991 comm="apparmor_parser"
[ 17.700069] Bluetooth: RFCOMM TTY layer initialized
[ 17.700075] Bluetooth: RFCOMM socket layer initialized
[ 17.700077] Bluetooth: RFCOMM ver 1.11
[ 17.793779] r8169 0000:0e:00.0: eth0: link down
[ 17.793790] r8169 0000:0e:00.0: eth0: link down
[ 17.794202] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.794784] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.799078] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.201325] i2c i2c-2: sendbytes: NAK bailout.
[ 19.388091] i2c i2c-2: sendbytes: NAK bailout.
[ 19.395471] r8169 0000:0e:00.0: eth0: link up
[ 19.395845] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.287774] i2c i2c-2: sendbytes: NAK bailout.
[ 30.320014] eth0: no IPv6 routers present
[ 32.532097] i2c i2c-2: sendbytes: NAK bailout.
[ 55.932078] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[ 56.067384] scsi7 : usb-storage 1-3:1.0
[ 57.065337] scsi 7:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 0 CCS
[ 57.067368] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 57.465610] sd 7:0:0:0: [sdc] 7870464 512-byte logical blocks: (4.02 GB/3.75 GiB)
[ 57.466211] sd 7:0:0:0: [sdc] Write Protect is off
[ 57.466222] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 57.466706] sd 7:0:0:0: [sdc] No Caching mode page present
[ 57.466716] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 57.471832] sd 7:0:0:0: [sdc] No Caching mode page present
[ 57.471845] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 57.472496] sdc: sdc1
[ 57.477321] sd 7:0:0:0: [sdc] No Caching mode page present
[ 57.477333] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 57.477343] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 174.862134] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 174.871754] SGI XFS Quota Management subsystem
[ 174.911061] JFS: nTxBlock = 8192, nTxLock = 65536
[ 174.978986] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 175.060211] QNX4 filesystem 0.2.3 registered.
[ 175.192749] Btrfs loaded
[ 191.613773] i2c i2c-2: sendbytes: NAK bailout.
[ 293.558364] i2c i2c-2: sendbytes: NAK bailout.
[ 303.714508] i2c i2c-2: sendbytes: NAK bailout.
[ 598.737638] i2c i2c-2: sendbytes: NAK bailout.
[ 690.416046] i2c i2c-2: sendbytes: NAK bailout.
[ 771.792066] i2c i2c-2: sendbytes: NAK bailout.
[ 822.607724] i2c i2c-2: sendbytes: NAK bailout.
[ 1319.973849] i2c i2c-2: sendbytes: NAK bailout.
[ 1634.340241] i2c i2c-2: sendbytes: NAK bailout.
[ 2212.354945] i2c i2c-2: sendbytes: NAK bailout.
[ 2719.299517] i2c i2c-2: sendbytes: NAK bailout.
[ 2931.875943] i2c i2c-2: sendbytes: NAK bailout.
[ 3002.814529] i2c i2c-2: sendbytes: NAK bailout.
[ 3337.476758] i2c i2c-2: sendbytes: NAK bailout.
[ 3727.084221] usb 2-2: USB disconnect, device number 3
[ 3734.220065] usb 2-2: new full-speed USB device number 4 using ohci_hcd
[ 3734.360051] usb 2-2: device descriptor read/64, error -62
[ 3734.604049] usb 2-2: device descriptor read/64, error -62
[ 3734.844086] usb 2-2: new full-speed USB device number 5 using ohci_hcd
[ 3735.370707] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3735.376611] usbcore: registered new interface driver btusb
[ 3743.143885] i2c i2c-2: sendbytes: NAK bailout.
[ 3753.231963] i2c i2c-2: sendbytes: NAK bailout.
[ 3773.497692] i2c i2c-2: sendbytes: NAK bailout.
[ 3803.844883] i2c i2c-2: sendbytes: NAK bailout.
[ 3844.324040] i2c i2c-2: sendbytes: NAK bailout.
[ 3864.536498] i2c i2c-2: sendbytes: NAK bailout.
[ 3935.492996] i2c i2c-2: sendbytes: NAK bailout.
[ 3986.138005] i2c i2c-2: sendbytes: NAK bailout.
[ 4026.629436] i2c i2c-2: sendbytes: NAK bailout.
[ 4107.781003] i2c i2c-2: sendbytes: NAK bailout.
[ 4138.116253] i2c i2c-2: sendbytes: NAK bailout.
[ 4148.170822] i2c i2c-2: sendbytes: NAK bailout.
[ 4168.377688] i2c i2c-2: sendbytes: NAK bailout.
[ 4178.438020] i2c i2c-2: sendbytes: NAK bailout.
[ 4208.773175] i2c i2c-2: sendbytes: NAK bailout.
[ 4228.964478] i2c i2c-2: sendbytes: NAK bailout.
[ 4239.012328] i2c i2c-2: sendbytes: NAK bailout.
[ 4259.203924] i2c i2c-2: sendbytes: NAK bailout.
[ 4279.395488] i2c i2c-2: sendbytes: NAK bailout.
[ 4299.587381] i2c i2c-2: sendbytes: NAK bailout.
[ 4319.766699] i2c i2c-2: sendbytes: NAK bailout.
[ 4329.828339] i2c i2c-2: sendbytes: NAK bailout.
[ 4400.762237] i2c i2c-2: sendbytes: NAK bailout.
[ 4420.998481] i2c i2c-2: sendbytes: NAK bailout.
[ 4512.198860] i2c i2c-2: sendbytes: NAK bailout.
[ 4583.142336] i2c i2c-2: sendbytes: NAK bailout.
[ 4593.190443] i2c i2c-2: sendbytes: NAK bailout.
[ 4623.526906] i2c i2c-2: sendbytes: NAK bailout.
[ 4643.739404] i2c i2c-2: sendbytes: NAK bailout.
[ 4704.539947] i2c i2c-2: sendbytes: NAK bailout.
[ 4755.193843] i2c i2c-2: sendbytes: NAK bailout.
[ 4826.150326] i2c i2c-2: sendbytes: NAK bailout.
[ 4846.363191] i2c i2c-2: sendbytes: NAK bailout.
[ 4856.422896] i2c i2c-2: sendbytes: NAK bailout.
[ 4896.903223] i2c i2c-2: sendbytes: NAK bailout.
[ 4906.951200] i2c i2c-2: sendbytes: NAK bailout.
[ 4927.141920] i2c i2c-2: sendbytes: NAK bailout.
[ 4998.073910] i2c i2c-2: sendbytes: NAK bailout.
[ 5008.134429] i2c i2c-2: sendbytes: NAK bailout.
[ 5119.686984] i2c i2c-2: sendbytes: NAK bailout.
[ 5129.735024] i2c i2c-2: sendbytes: NAK bailout.
[ 5200.666900] i2c i2c-2: sendbytes: NAK bailout.
[ 5251.319415] i2c i2c-2: sendbytes: NAK bailout.
[ 5281.705286] i2c i2c-2: sendbytes: NAK bailout.
[ 5423.558435] i2c i2c-2: sendbytes: NAK bailout.
[ 5464.070936] i2c i2c-2: sendbytes: NAK bailout.
[ 5484.295125] i2c i2c-2: sendbytes: NAK bailout.
[ 5504.487327] i2c i2c-2: sendbytes: NAK bailout.
[ 5524.742523] i2c i2c-2: sendbytes: NAK bailout.
[ 5545.004867] i2c i2c-2: sendbytes: NAK bailout.
[ 5565.261461] i2c i2c-2: sendbytes: NAK bailout.
[ 5585.445332] i2c i2c-2: sendbytes: NAK bailout.
[ 5605.707162] i2c i2c-2: sendbytes: NAK bailout.
[ 5625.861808] i2c i2c-2: sendbytes: NAK bailout.
[ 5646.022396] i2c i2c-2: sendbytes: NAK bailout.
[ 5676.325206] i2c i2c-2: sendbytes: NAK bailout.
[ 5686.392250] i2c i2c-2: sendbytes: NAK bailout.
[ 5706.596510] i2c i2c-2: sendbytes: NAK bailout.
[ 5726.788300] i2c i2c-2: sendbytes: NAK bailout.
[ 5736.855124] i2c i2c-2: sendbytes: NAK bailout.
[ 5758.633649] usb 2-2: USB disconnect, device number 5
[ 5762.492127] usb 2-2: new full-speed USB device number 6 using ohci_hcd
[ 5762.632066] usb 2-2: device descriptor read/64, error -62
[ 5828.068329] i2c i2c-2: sendbytes: NAK bailout.
[ 5959.844720] i2c i2c-2: sendbytes: NAK bailout.
[ 6051.050361] i2c i2c-2: sendbytes: NAK bailout.
[ 6110.429697] usb 2-2: USB disconnect, device number 6
[ 6152.149507] i2c i2c-2: sendbytes: NAK bailout.
[ 6243.202756] i2c i2c-2: sendbytes: NAK bailout.
[ 6303.842969] i2c i2c-2: sendbytes: NAK bailout.
[ 6476.196952] i2c i2c-2: sendbytes: NAK bailout.
Spoiler: show
1 Γνώσεις Linux: ⅜ Προγραμματισμού: ‱ ┃ Αγγλικών: ⅜
Desktop
Ubuntu-Mate 20.04
Intel Core i3-4150 CPU @ 3.50GHz ‖ RAM 7,5 GB ‖ ASRock H81M-DGS R2.0
Intel Device [8086:041e] {i915}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Άβαταρ μέλους
joe iwannou
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 1179
Εγγραφή: 25 Απρ 2010, 04:54
Τοποθεσία: Πες με τι δεν καταλαβαινεις
Εκτύπωση

ΠροηγούμενηΕπόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Γραφικών / Εικόνα / TV