TV USB stickTurbo X DTT 1000 σε netbook

[hladop]

Κώδικας: Επιλογή όλων

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 1b80:d394 Afatech
Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver

[konnn]

Τι θα ήθελες να πεις με τη δημοσίευσή σου; Ανανέωσε την ώστε να γίνει πιο κατανοητό αυτό που ζητάς.
Ευχαριστούμε.

[Learner]

Υπάρχει ήδη θέμα για το συγκεκριμένο Usb Tv (1b80:d394 Afatech). http://forum.ubuntu-gr.org/viewtopic.ph ... =0#p202643
και για παρόμοιο TV Usb (1b80:d418 Afatech) http://forum.ubuntu-gr.org/viewtopic.ph ... 10#p246359
Το βλέπω δύσκολο , να δουλέψει.

[hladop]

Το γνωρίζω το άλλο topic απλώς ρωτώ αν υπάρχει κάτι νεότερο στην έκδοση 12.04.

[simosx]

Έχω μια Afatech και λειτουργεί (και με mpeg4).
Μπορείς να γράψεις το αποτέλεσμα της dmesg ώστε να δούμε τα μηνύματα καθώς συνδέεις τη συσκευή στο USB;

[hladop]

Κώδικας: Επιλογή όλων

[ 0.409051] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.409061] pci_bus 0000:05: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.409070] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
[ 0.409079] pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.409089] pci_bus 0000:09: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.409098] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.409107] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.409116] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.409125] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.409134] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.409143] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.409152] pci_bus 0000:11: resource 10 [mem 0x000e4000-0x000e7fff]
[ 0.409161] pci_bus 0000:11: resource 11 [mem 0x40000000-0xf7ffffff]
[ 0.409170] pci_bus 0000:11: resource 12 [io 0x0d00-0xfdff]
[ 0.409279] NET: Registered protocol family 2
[ 0.409479] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.410117] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.411204] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.411765] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.411775] TCP reno registered
[ 0.411789] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.411812] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.412098] NET: Registered protocol family 1
[ 0.412148] pci 0000:00:02.0: Boot video device
[ 0.412220] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.412253] pci 0000:00:1d.0: PCI INT A disabled
[ 0.412287] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.412316] pci 0000:00:1d.1: PCI INT B disabled
[ 0.412337] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.412364] pci 0000:00:1d.2: PCI INT C disabled
[ 0.412384] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.412411] pci 0000:00:1d.3: PCI INT D disabled
[ 0.412433] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.412489] pci 0000:00:1d.7: PCI INT A disabled
[ 0.412548] PCI: CLS 32 bytes, default 64
[ 0.412563] Simple Boot Flag at 0x36 set to 0x1
[ 0.413564] audit: initializing netlink socket (disabled)
[ 0.413591] type=2000 audit(1344434182.408:1): initialized
[ 0.475992] highmem bounce pool size: 64 pages
[ 0.476050] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.487562] VFS: Disk quotas dquot_6.5.2
[ 0.487784] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.489747] fuse init (API version 7.17)
[ 0.490082] msgmni has been set to 1710
[ 0.491248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.491366] io scheduler noop registered
[ 0.491373] io scheduler deadline registered
[ 0.491400] io scheduler cfq registered (default)
[ 0.491739] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.491834] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.491997] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.492118] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.492356] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.492455] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.492678] intel_idle: MWAIT substates: 0x20220
[ 0.492696] intel_idle: v0.4 model 0x1C
[ 0.492702] intel_idle: lapic_timer_reliable_states 0x2
[ 0.492709] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.692895] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.842095] Freeing initrd memory: 13828k freed
[ 0.892856] ACPI: AC Adapter [ADP0] (off-line)
[ 0.893194] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.893208] ACPI: Power Button [PWRB]
[ 0.893324] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.894732] ACPI: Lid Switch [LID0]
[ 0.894881] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.894892] ACPI: Sleep Button [SLPB]
[ 0.895025] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.895035] ACPI: Power Button [PWRF]
[ 0.909031] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.909039] ACPI: Thermal Zone [TZ0] (25 C)
[ 0.909089] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.909111] ACPI: Battery Slot [BAT0] (battery present)
[ 0.909195] ERST: Table is not found!
[ 0.909200] GHES: HEST is not enabled!
[ 0.909344] isapnp: Scanning for PnP cards...
[ 0.909466] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.934820] ACPI: Battery Slot [BAT0] (battery present)
[ 1.263188] isapnp: No Plug & Play device found
[ 1.301016] Linux agpgart interface v0.103
[ 1.301189] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.301390] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.301637] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.301888] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.305917] brd: module loaded
[ 1.308074] loop: module loaded
[ 1.308404] ahci 0000:00:1f.2: version 3.0
[ 1.308432] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.308526] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.308595] ahci: SSS flag set, parallel bus scan disabled
[ 1.308645] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.308654] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[ 1.308665] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.309843] scsi0 : ahci
[ 1.310091] scsi1 : ahci
[ 1.310292] scsi2 : ahci
[ 1.310492] scsi3 : ahci
[ 1.310814] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 42
[ 1.310823] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 42
[ 1.310829] ata3: DUMMY
[ 1.310833] ata4: DUMMY
[ 1.311982] Fixed MDIO Bus: probed
[ 1.312077] tun: Universal TUN/TAP device driver, 1.6
[ 1.312082] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.312241] PPP generic driver version 2.4.2
[ 1.312514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.312563] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.312602] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.312610] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.312735] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.312769] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.312788] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.316668] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.316713] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
[ 1.332036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.332383] hub 1-0:1.0: USB hub found
[ 1.332395] hub 1-0:1.0: 8 ports detected
[ 1.332571] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.332606] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.332654] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.332671] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.332679] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.332810] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.332852] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.333173] hub 2-0:1.0: USB hub found
[ 1.333184] hub 2-0:1.0: 2 ports detected
[ 1.333327] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.333343] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.333351] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.333469] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.333527] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.333847] hub 3-0:1.0: USB hub found
[ 1.333859] hub 3-0:1.0: 2 ports detected
[ 1.333996] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.334016] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.334024] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.334146] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.334206] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.334535] hub 4-0:1.0: USB hub found
[ 1.334546] hub 4-0:1.0: 2 ports detected
[ 1.334689] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.334705] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.334713] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.334840] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.334897] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.335219] hub 5-0:1.0: USB hub found
[ 1.335230] hub 5-0:1.0: 2 ports detected
[ 1.335503] usbcore: registered new interface driver libusual
[ 1.335615] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:SENM] at 0x60,0x64 irq 1,12
[ 1.340682] i8042: Detected active multiplexing controller, rev 1.1
[ 1.342836] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.342856] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.342940] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.343010] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.343079] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.343445] mousedev: PS/2 mouse device common for all mice
[ 1.344251] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.344301] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.344471] device-mapper: uevent: version 1.0.3
[ 1.344667] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.344760] EISA: Probing bus 0 at eisa.0
[ 1.344765] EISA: Cannot allocate resource for mainboard
[ 1.344771] Cannot allocate resource for EISA slot 1
[ 1.344776] Cannot allocate resource for EISA slot 2
[ 1.344781] Cannot allocate resource for EISA slot 3
[ 1.344786] Cannot allocate resource for EISA slot 4
[ 1.344790] Cannot allocate resource for EISA slot 5
[ 1.344795] Cannot allocate resource for EISA slot 6
[ 1.344800] Cannot allocate resource for EISA slot 7
[ 1.344804] Cannot allocate resource for EISA slot 8
[ 1.344809] EISA: Detected 0 cards.
[ 1.344836] cpufreq-nforce2: No nForce2 chipset.
[ 1.344992] cpuidle: using governor ladder
[ 1.345254] cpuidle: using governor menu
[ 1.345260] EFI Variables Facility v0.08 2004-May-17
[ 1.345815] TCP cubic registered
[ 1.346123] NET: Registered protocol family 10
[ 1.347445] NET: Registered protocol family 17
[ 1.347458] Registering the dns_resolver key type
[ 1.347502] Using IPI No-Shortcut mode
[ 1.347929] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.348296] PM: Hibernation image not present or could not be loaded.
[ 1.348328] registered taskstats version 1
[ 1.366465] Magic number: 8:880:937
[ 1.366618] rtc_cmos 00:04: setting system clock to 2012-08-08 13:56:24 UTC (1344434184)
[ 1.367472] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.367479] EDD information not available.
[ 1.628151] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.629715] ata1.00: ATA-8: WDC WD2500BUDT-63DPZY0, 01.01A01, max UDMA/133
[ 1.629733] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.631428] ata1.00: configured for UDMA/133
[ 1.631793] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BUDT-6 01.0 PQ: 0 ANSI: 5
[ 1.632248] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.632260] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.632360] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.632506] sd 0:0:0:0: [sda] Write Protect is off
[ 1.632520] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.632638] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.686865] sda: sda1 sda2 < sda5 >
[ 1.688113] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.756134] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 1.952096] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.952508] Freeing unused kernel memory: 740k freed
[ 1.953105] Write protecting the kernel text: 5816k
[ 1.953162] Write protecting the kernel read-only data: 2376k
[ 1.953171] NX-protecting the kernel data: 4424k
[ 2.003238] udevd[94]: starting version 175
[ 2.144095] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 2.571080] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 2.571174] jme 0000:09:00.5: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.571209] jme 0000:09:00.5: setting latency timer to 64
[ 2.573164] sdhci: Secure Digital Host Controller Interface driver
[ 2.573176] sdhci: Copyright(c) Pierre Ossman
[ 2.589950] jme 0000:09:00.5: eth0: JMC260 Fast Ethernet chiprev:22 pcirev:2 macaddr:00:90:f5:a5:04:30
[ 2.590028] sdhci-pci 0000:09:00.0: SDHCI controller found [197b:2382] (rev 80)
[ 2.590063] sdhci-pci 0000:09:00.0: enabling device (0104 -> 0106)
[ 2.590089] sdhci-pci 0000:09:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.590185] sdhci-pci 0000:09:00.0: setting latency timer to 64
[ 2.590220] mmc0: no vmmc regulator found
[ 2.590334] Registered led device: mmc0::
[ 2.595980] mmc0: SDHCI controller on PCI [0000:09:00.0] using ADMA
[ 2.596076] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2381] (rev 80)
[ 2.596109] sdhci-pci 0000:09:00.2: enabling device (0104 -> 0106)
[ 2.596131] sdhci-pci 0000:09:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.596155] sdhci-pci 0000:09:00.2: Refusing to bind to secondary interface.
[ 2.596175] sdhci-pci 0000:09:00.2: PCI INT B disabled
[ 2.786140] usbcore: registered new interface driver usbhid
[ 2.786151] usbhid: USB HID core driver
[ 2.859670] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.948146] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.026317] udevd[325]: starting version 175
[ 17.058049] Adding 1036284k swap on /dev/sda5. Priority:-1 extents:1 across:1036284k
[ 17.099852] lp: driver loaded but no devices found
[ 17.606551] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 18.067789] wmi: Mapper loaded
[ 18.071603] cfg80211: Calling CRDA to update world regulatory domain
[ 18.084817] [drm] Initialized drm 1.1.0 20060810
[ 18.153653] jmb38x_ms 0000:09:00.3: enabling device (0104 -> 0106)
[ 18.153678] jmb38x_ms 0000:09:00.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 18.153698] jmb38x_ms 0000:09:00.3: setting latency timer to 64
[ 18.303301] ppdev: user-space parallel port driver
[ 18.332585] Bluetooth: Core ver 2.16
[ 18.332831] NET: Registered protocol family 31
[ 18.332842] Bluetooth: HCI device and connection manager initialized
[ 18.332854] Bluetooth: HCI socket layer initialized
[ 18.332862] Bluetooth: L2CAP socket layer initialized
[ 18.332932] Bluetooth: SCO socket layer initialized
[ 18.384523] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.384535] Bluetooth: BNEP filters: protocol multicast
[ 18.387212] Bluetooth: RFCOMM TTY layer initialized
[ 18.387234] Bluetooth: RFCOMM socket layer initialized
[ 18.387244] Bluetooth: RFCOMM ver 1.11
[ 18.429299] type=1400 audit(1344423401.558:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=574 comm="apparmor_parser"
[ 18.435350] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.435369] i915 0000:00:02.0: setting latency timer to 64
[ 18.442118] type=1400 audit(1344423401.570:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=574 comm="apparmor_parser"
[ 18.670798] type=1400 audit(1344423401.798:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=587 comm="apparmor_parser"
[ 18.682248] type=1400 audit(1344423401.810:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser"
[ 18.683282] type=1400 audit(1344423401.810:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser"
[ 18.752477] rtl8192se 0000:05:00.0: enabling device (0104 -> 0107)
[ 18.752501] rtl8192se 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.752526] rtl8192se 0000:05:00.0: setting latency timer to 64
[ 18.759645] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 18.759663] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 18.759671] [drm] Driver supports precise vblank timestamp query.
[ 18.765005] rtl8192se: rtl8192ce: FW Power Save off (module option)
[ 18.785242] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 18.840347] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2
[ 18.848475] fixme: max PWM is zero.
[ 18.851545] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/input/input5
[ 18.853425] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:1d.0-2:1
[ 18.904533] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[ 18.904541] Loading firmware rtlwifi/rtl8192sefw.bin
[ 19.214899] [drm] initialized overlay support
[ 19.461843] fbcon: inteldrmfb (fb0) is primary device
[ 19.462486] Console: switching to colour frame buffer device 128x37
[ 19.462583] fb0: inteldrmfb frame buffer device
[ 19.462591] drm: registered panic notifier
[ 19.764725] acpi device:02: registered as cooling_device2
[ 19.765234] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 19.765542] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.765783] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 19.823066] snd_hda_intel 0000:00:1b.0: enabling device (0104 -> 0106)
[ 19.823126] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 19.823271] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 19.823360] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 20.016715] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 20.017625] init: failsafe main process (674) killed by TERM signal
[ 20.032149] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 20.579045] type=1400 audit(1344423403.706:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=792 comm="apparmor_parser"
[ 20.622461] type=1400 audit(1344423403.750:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=793 comm="apparmor_parser"
[ 20.638348] type=1400 audit(1344423403.766:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=793 comm="apparmor_parser"
[ 20.639315] type=1400 audit(1344423403.766:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=793 comm="apparmor_parser"
[ 20.697698] jme 0000:09:00.5: irq 45 for MSI/MSI-X
[ 20.720761] jme 0000:09:00.5: eth0: Link is down
[ 20.721477] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.723243] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.751067] cfg80211: World regulatory domain updated:
[ 20.751079] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.751093] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.751106] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.751118] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.751131] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.751143] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.775480] type=1400 audit(1344423403.902:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=804 comm="apparmor_parser"
[ 20.988497] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988513] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988524] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988538] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988548] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988560] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988571] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988584] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988594] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988607] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988618] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988631] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988642] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988656] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988667] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988680] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988691] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988705] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988716] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988729] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988739] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988752] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988763] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988776] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988787] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 20.988801] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.988811] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 21.002319] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 21.048377] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 21.084446] cfg80211: Calling CRDA for country: EC
[ 21.191966] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 21.191983] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.191995] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192059] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192071] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192083] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192093] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192105] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192115] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192127] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192137] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192149] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192159] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192170] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192180] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192192] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192202] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192214] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192223] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192236] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192245] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192257] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192267] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192279] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192288] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 21.192300] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.192309] cfg80211: Disabling freq 2484 MHz
[ 21.192322] cfg80211: Regulatory domain changed to country: EC
[ 21.192329] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.192340] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 21.192351] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
[ 21.192362] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
[ 21.192373] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
[ 21.404848] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.466537] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.493821] psmouse serio2: sentelic: Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K
[ 23.936199] init: plymouth-stop pre-start process (1097) terminated with status 1
[ 25.170527] wlan0: authenticate with 00:1c:a8:fb:bc:45 (try 1)
[ 25.172066] wlan0: authenticated
[ 25.172642] wlan0: associate with 00:1c:a8:fb:bc:45 (try 1)
[ 25.175483] wlan0: RX AssocResp from 00:1c:a8:fb:bc:45 (capab=0x451 status=0 aid=3)
[ 25.175493] wlan0: associated
[ 25.187357] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.219342] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input9
[ 36.488048] wlan0: no IPv6 routers present


[simosx]

Δεν είδα πληροφορίες για τη συσκευή. Επιβεβαίωσε ότι έχεις συνδέσει το USB stick, περιμένεις για 5-10 δευτερόλεπτα, και μετά λαμβάνεις φρέσκο dmesg.

[konnn]

Κώδικας: Επιλογή όλων

[ 0.421147] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
[ 0.421156] pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.421165] pci_bus 0000:09: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.421175] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.421184] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.421193] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.421202] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.421211] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.421220] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.421229] pci_bus 0000:11: resource 10 [mem 0x000e4000-0x000e7fff]
[ 0.421238] pci_bus 0000:11: resource 11 [mem 0x40000000-0xf7ffffff]
[ 0.421247] pci_bus 0000:11: resource 12 [io 0x0d00-0xfdff]
[ 0.421354] NET: Registered protocol family 2
[ 0.421548] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.422204] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.423329] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.423879] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.423890] TCP reno registered
[ 0.423905] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.423929] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.424232] NET: Registered protocol family 1
[ 0.424279] pci 0000:00:02.0: Boot video device
[ 0.424353] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.424386] pci 0000:00:1d.0: PCI INT A disabled
[ 0.424425] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.424455] pci 0000:00:1d.1: PCI INT B disabled
[ 0.424478] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.424505] pci 0000:00:1d.2: PCI INT C disabled
[ 0.424525] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.424552] pci 0000:00:1d.3: PCI INT D disabled
[ 0.424573] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.424626] pci 0000:00:1d.7: PCI INT A disabled
[ 0.424683] PCI: CLS 32 bytes, default 64
[ 0.424695] Simple Boot Flag at 0x36 set to 0x1
[ 0.425709] audit: initializing netlink socket (disabled)
[ 0.425736] type=2000 audit(1344519622.420:1): initialized
[ 0.488087] highmem bounce pool size: 64 pages
[ 0.488104] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.499658] VFS: Disk quotas dquot_6.5.2
[ 0.499873] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.501819] fuse init (API version 7.17)
[ 0.502157] msgmni has been set to 1710
[ 0.503322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.503425] io scheduler noop registered
[ 0.503432] io scheduler deadline registered
[ 0.503456] io scheduler cfq registered (default)
[ 0.503788] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.503883] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.504099] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.504184] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.504421] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.504510] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.504742] intel_idle: MWAIT substates: 0x20220
[ 0.504759] intel_idle: v0.4 model 0x1C
[ 0.504765] intel_idle: lapic_timer_reliable_states 0x2
[ 0.504773] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.704822] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.850606] Freeing initrd memory: 13828k freed
[ 0.904832] ACPI: AC Adapter [ADP0] (off-line)
[ 0.905173] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.905187] ACPI: Power Button [PWRB]
[ 0.905307] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.906597] ACPI: Lid Switch [LID0]
[ 0.906744] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.906756] ACPI: Sleep Button [SLPB]
[ 0.906882] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.906891] ACPI: Power Button [PWRF]
[ 0.920892] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.920899] ACPI: Thermal Zone [TZ0] (25 C)
[ 0.920950] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.920971] ACPI: Battery Slot [BAT0] (battery present)
[ 0.921056] ERST: Table is not found!
[ 0.921061] GHES: HEST is not enabled!
[ 0.921213] isapnp: Scanning for PnP cards...
[ 0.921317] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.928445] ACPI: Battery Slot [BAT0] (battery present)
[ 1.275398] isapnp: No Plug & Play device found
[ 1.312634] Linux agpgart interface v0.103
[ 1.312807] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.313008] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.313253] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.313509] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.317542] brd: module loaded
[ 1.319668] loop: module loaded
[ 1.320000] ahci 0000:00:1f.2: version 3.0
[ 1.320064] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.320160] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.320229] ahci: SSS flag set, parallel bus scan disabled
[ 1.320279] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.320288] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[ 1.320298] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.321475] scsi0 : ahci
[ 1.321723] scsi1 : ahci
[ 1.321923] scsi2 : ahci
[ 1.322124] scsi3 : ahci
[ 1.322442] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 42
[ 1.322451] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 42
[ 1.322457] ata3: DUMMY
[ 1.322461] ata4: DUMMY
[ 1.323570] Fixed MDIO Bus: probed
[ 1.323624] tun: Universal TUN/TAP device driver, 1.6
[ 1.323629] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.323789] PPP generic driver version 2.4.2
[ 1.324096] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.324143] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.324182] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.324190] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.324318] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.324355] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.324373] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.328261] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.328301] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
[ 1.344043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.344411] hub 1-0:1.0: USB hub found
[ 1.344424] hub 1-0:1.0: 8 ports detected
[ 1.344645] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.344681] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.344798] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.344823] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.344832] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.344966] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.345009] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.345332] hub 2-0:1.0: USB hub found
[ 1.345344] hub 2-0:1.0: 2 ports detected
[ 1.345487] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.345507] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.345515] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.345628] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.345688] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.346000] hub 3-0:1.0: USB hub found
[ 1.346011] hub 3-0:1.0: 2 ports detected
[ 1.346155] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.346171] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.346178] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.346291] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.346349] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.346674] hub 4-0:1.0: USB hub found
[ 1.346685] hub 4-0:1.0: 2 ports detected
[ 1.346825] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.346841] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.346849] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.346979] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.347036] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.347351] hub 5-0:1.0: USB hub found
[ 1.347363] hub 5-0:1.0: 2 ports detected
[ 1.347645] usbcore: registered new interface driver libusual
[ 1.347739] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:SENM] at 0x60,0x64 irq 1,12
[ 1.353323] i8042: Detected active multiplexing controller, rev 1.1
[ 1.355740] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.355760] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.355844] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.355915] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.355984] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.356350] mousedev: PS/2 mouse device common for all mice
[ 1.357096] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.357142] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.357286] device-mapper: uevent: version 1.0.3
[ 1.357470] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.357561] EISA: Probing bus 0 at eisa.0
[ 1.357567] EISA: Cannot allocate resource for mainboard
[ 1.357573] Cannot allocate resource for EISA slot 1
[ 1.357578] Cannot allocate resource for EISA slot 2
[ 1.357582] Cannot allocate resource for EISA slot 3
[ 1.357587] Cannot allocate resource for EISA slot 4
[ 1.357592] Cannot allocate resource for EISA slot 5
[ 1.357596] Cannot allocate resource for EISA slot 6
[ 1.357601] Cannot allocate resource for EISA slot 7
[ 1.357606] Cannot allocate resource for EISA slot 8
[ 1.357610] EISA: Detected 0 cards.
[ 1.357628] cpufreq-nforce2: No nForce2 chipset.
[ 1.357777] cpuidle: using governor ladder
[ 1.358037] cpuidle: using governor menu
[ 1.358043] EFI Variables Facility v0.08 2004-May-17
[ 1.358627] TCP cubic registered
[ 1.358909] NET: Registered protocol family 10
[ 1.360285] NET: Registered protocol family 17
[ 1.360298] Registering the dns_resolver key type
[ 1.360374] Using IPI No-Shortcut mode
[ 1.360703] PM: Hibernation image not present or could not be loaded.
[ 1.360730] registered taskstats version 1
[ 1.363063] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.379125] Magic number: 8:199:685
[ 1.379277] rtc_cmos 00:04: setting system clock to 2012-08-09 13:40:24 UTC (1344519624)
[ 1.380189] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.380197] EDD information not available.
[ 1.640133] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.641666] ata1.00: ATA-8: WDC WD2500BUDT-63DPZY0, 01.01A01, max UDMA/133
[ 1.641684] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.643453] ata1.00: configured for UDMA/133
[ 1.643816] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BUDT-6 01.0 PQ: 0 ANSI: 5
[ 1.644273] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.644285] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.644378] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.644559] sd 0:0:0:0: [sda] Write Protect is off
[ 1.644572] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.644693] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.699490] sda: sda1 sda2 < sda5 >
[ 1.700795] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.768097] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 1.964088] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.964494] Freeing unused kernel memory: 740k freed
[ 1.965120] Write protecting the kernel text: 5816k
[ 1.965177] Write protecting the kernel read-only data: 2376k
[ 1.965185] NX-protecting the kernel data: 4424k
[ 2.015194] udevd[93]: starting version 175
[ 2.156176] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 2.577439] sdhci: Secure Digital Host Controller Interface driver
[ 2.577450] sdhci: Copyright(c) Pierre Ossman
[ 2.578635] sdhci-pci 0000:09:00.0: SDHCI controller found [197b:2382] (rev 80)
[ 2.578672] sdhci-pci 0000:09:00.0: enabling device (0104 -> 0106)
[ 2.578695] sdhci-pci 0000:09:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.578779] sdhci-pci 0000:09:00.0: setting latency timer to 64
[ 2.578809] mmc0: no vmmc regulator found
[ 2.578912] Registered led device: mmc0::
[ 2.579082] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 2.585114] mmc0: SDHCI controller on PCI [0000:09:00.0] using ADMA
[ 2.585207] jme 0000:09:00.5: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.585240] jme 0000:09:00.5: setting latency timer to 64
[ 2.587855] jme 0000:09:00.5: eth0: JMC260 Fast Ethernet chiprev:22 pcirev:2 macaddr:00:90:f5:a5:04:30
[ 2.589152] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2381] (rev 80)
[ 2.589185] sdhci-pci 0000:09:00.2: enabling device (0104 -> 0106)
[ 2.589209] sdhci-pci 0000:09:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.589233] sdhci-pci 0000:09:00.2: Refusing to bind to secondary interface.
[ 2.589253] sdhci-pci 0000:09:00.2: PCI INT B disabled
[ 2.828211] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.831771] usbcore: registered new interface driver usbhid
[ 2.831782] usbhid: USB HID core driver
[ 17.341393] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.394612] udevd[310]: starting version 175
[ 17.426286] Adding 1036284k swap on /dev/sda5. Priority:-1 extents:1 across:1036284k
[ 17.482061] lp: driver loaded but no devices found
[ 18.084325] wmi: Mapper loaded
[ 18.174084] cfg80211: Calling CRDA to update world regulatory domain
[ 18.205755] jmb38x_ms 0000:09:00.3: enabling device (0104 -> 0106)
[ 18.205782] jmb38x_ms 0000:09:00.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 18.205803] jmb38x_ms 0000:09:00.3: setting latency timer to 64
[ 18.217676] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 18.299054] [drm] Initialized drm 1.1.0 20060810
[ 18.352533] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2
[ 18.358970] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/input/input5
[ 18.359479] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:1d.0-2:1
[ 18.368683] rtl8192se 0000:05:00.0: enabling device (0104 -> 0107)
[ 18.368709] rtl8192se 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.368730] rtl8192se 0000:05:00.0: setting latency timer to 64
[ 18.381060] rtl8192se: rtl8192ce: FW Power Save off (module option)
[ 18.486621] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.486638] i915 0000:00:02.0: setting latency timer to 64
[ 18.526064] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[ 18.526073] Loading firmware rtlwifi/rtl8192sefw.bin
[ 18.634991] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 18.635011] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 18.635021] [drm] Driver supports precise vblank timestamp query.
[ 18.879756] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.062439] type=1400 audit(1344508842.179:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=586 comm="apparmor_parser"
[ 19.068314] type=1400 audit(1344508842.187:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=586 comm="apparmor_parser"
[ 19.069354] type=1400 audit(1344508842.187:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=586 comm="apparmor_parser"
[ 19.139041] fixme: max PWM is zero.
[ 19.280638] Bluetooth: Core ver 2.16
[ 19.282596] NET: Registered protocol family 31
[ 19.282610] Bluetooth: HCI device and connection manager initialized
[ 19.282621] Bluetooth: HCI socket layer initialized
[ 19.282630] Bluetooth: L2CAP socket layer initialized
[ 19.282663] Bluetooth: SCO socket layer initialized
[ 19.294795] ppdev: user-space parallel port driver
[ 19.483439] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.483452] Bluetooth: BNEP filters: protocol multicast
[ 19.499621] Bluetooth: RFCOMM TTY layer initialized
[ 19.499643] Bluetooth: RFCOMM socket layer initialized
[ 19.499652] Bluetooth: RFCOMM ver 1.11
[ 19.792746] type=1400 audit(1344508842.911:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=652 comm="apparmor_parser"
[ 19.794820] type=1400 audit(1344508842.911:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=652 comm="apparmor_parser"
[ 19.838439] [drm] initialized overlay support
[ 19.870034] fbcon: inteldrmfb (fb0) is primary device
[ 19.874698] Console: switching to colour frame buffer device 128x37
[ 19.874798] fb0: inteldrmfb frame buffer device
[ 19.874807] drm: registered panic notifier
[ 19.910393] acpi device:02: registered as cooling_device2
[ 19.910900] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 19.911262] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.911537] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 20.267653] snd_hda_intel 0000:00:1b.0: enabling device (0104 -> 0106)
[ 20.267723] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 20.269836] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 20.269922] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 20.382792] init: failsafe main process (692) killed by TERM signal
[ 20.417495] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 20.427201] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 20.844834] cfg80211: World regulatory domain updated:
[ 20.844847] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.844861] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.844873] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.844885] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.844897] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.844909] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.052000] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052072] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052083] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052096] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052106] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052118] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052128] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052141] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052152] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052165] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052175] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052188] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052199] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052213] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052224] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052237] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052248] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052262] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052273] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052286] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052297] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052310] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052322] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052335] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052346] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 21.052359] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.052370] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 21.059906] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 21.089521] type=1400 audit(1344508844.207:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=805 comm="apparmor_parser"
[ 21.098841] type=1400 audit(1344508844.215:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=806 comm="apparmor_parser"
[ 21.104084] psmouse serio2: sentelic: Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K
[ 21.104462] cfg80211: Calling CRDA for country: EC
[ 21.110973] type=1400 audit(1344508844.227:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=806 comm="apparmor_parser"
[ 21.112057] type=1400 audit(1344508844.227:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=806 comm="apparmor_parser"
[ 21.113745] jme 0000:09:00.5: irq 45 for MSI/MSI-X
[ 21.136707] jme 0000:09:00.5: eth0: Link is down
[ 21.137471] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.138803] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 21.164637] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.225744] type=1400 audit(1344508844.343:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=819 comm="apparmor_parser"
[ 21.436995] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.441807] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.511050] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511067] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511078] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511091] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511102] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511114] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511125] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511138] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511148] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511161] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511172] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511185] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511196] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511209] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511219] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511232] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511243] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511256] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511266] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511279] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511290] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511302] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511313] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511325] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511336] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 21.511349] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 21.511358] cfg80211: Disabling freq 2484 MHz
[ 21.511372] cfg80211: Regulatory domain changed to country: EC
[ 21.511380] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.511393] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 21.511405] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
[ 21.511417] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
[ 21.511430] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
[ 23.464531] init: anacron main process (931) killed by TERM signal
[ 24.531523] init: plymouth-stop pre-start process (1106) terminated with status 1
[ 25.180070] wlan0: authenticate with 00:1c:a8:fb:bc:45 (try 1)
[ 25.181775] wlan0: authenticated
[ 25.202810] wlan0: associate with 00:1c:a8:fb:bc:45 (try 1)
[ 25.205805] wlan0: RX AssocResp from 00:1c:a8:fb:bc:45 (capab=0x451 status=0 aid=2)
[ 25.205820] wlan0: associated
[ 25.207870] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.140075] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input9
[ 36.176051] wlan0: no IPv6 routers present
[ 137.421567] usb 1-3: USB disconnect, device number 3
[ 143.016187] usb 1-3: new high-speed USB device number 4 using ehci_hcd


Είναι καλό να παραθέτουμε και τη δημοσίευση (κουμπί "ΠΑΡΑΘΕΣΗ") που μας προτείνει μια εντολή ή την ίδια την εντολή ώστε κάποιος που διαβάζει πχ αυτή τη δημοσίευση να μη χρειάζεται να κάνει αναδρομές . Ευχαριστούμε.

[simosx]

[ 137.421567] usb 1-3: USB disconnect, device number 3
[ 143.016187] usb 1-3: new high-speed USB device number 4 using ehci_hcd

Ακόμα δε βλέπω κάτι σχετικό (ή μπορεί να μην το πρόσεξα).
Στο τέλος του παραπάνω κειμένου υπάρχει αυτή η αναφορά για αποσύνδεση συσκευής. Δεν εντόπισα από τον κατεβατό του κειμένου που συνδέθηκε.
Κάτι που βοηθάει είναι
1. Ξεκινάς τον υπολογιστή σου δίχως να είναι συνδεδεμένο το USB.
2. Μπαίνεις στο γραφικό περιβάλλον.
3. Συνδέεις το USB, Οπότε στο dmesg θα φανούν στο τέλος οι σχετικές εντολές που χρειαζόμαστε.
4. Στέλνεις το αποτέλεσμα της dmesg.

[Learner]

Κάτι που μπορείς να κάνεις , για να δούμε αν αναγνωρίζει ή και πως το αναγνωρίζει το USB , είναι:

Ανοίγεις τερματικό(σε Fullscreen) και γράφεις

Κώδικας: Επιλογή όλων

watch -n 1 "dmesg | tail -n30"

Μετά συνδέεις το USB και προσέχεις τι μηνύματα θα σου εμφανίσει.
Τα μηνύματα που θα σου εμφανίσει κάνε τα ένα copy-paste εδώ.
Βγαίνεις από την εντολή με Ctrl + C