Low resolution mode

...κάρτες γραφικών / προβλήματα εικόνας / τηλεοπτικοί δέκτες
Κανόνες Δ. Συζήτησης
Αν έχετε πρόβλημα με την κάρτα γραφικών σας και δεν μπορείτε να μπείτε σε γραφικό περιβάλλον,
δοκιμάστε να τρέξετε την παρακάτω εντολή για να ελέγξετε αν το σύστημά σας χρειάζεται πρόσθετους κλειστούς οδηγούς:
jockey-text

Για κάρτα τηλεόρασης δώστε τα αποτελέσματα των παρακάτω εντολών :
lspci -nn (Για εσωτερικές κάρτες pci)
lsusb (Για εξωτερικές κάρτες με σύνδεση usb)

Low resolution mode

Δημοσίευσηαπό Alexandros » 19 Φεβ 2015, 15:19

Εγκατέστησα το 12.04.5 σε ένα Presario CQ56. Στη αρχή λειτουργούσε κανονικά. Στη συνέχεια εγκατέστησα διάφορες εφαρμογές και έκανα reboot.

Από εκεί και πέρα μου βγάζει μήνυμα ότι μπορεί να λειτουργήσει μόνο σε Low Graphics Mode αλλά ούτε εκεί δεν λειτουργεί τελικά.

Τα logs που έχω είναι αυτά:

lightdm.log
Κώδικας: Επιλογή όλων
[+0.03s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.03s] DEBUG: Starting Light Display Manager 1.2.3, UID=0 PID=1594
[+0.03s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.03s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.14s] DEBUG: Registered seat module xlocal
[+0.14s] DEBUG: Registered seat module xremote
[+0.14s] DEBUG: Adding default seat
[+0.14s] DEBUG: Starting seat
[+0.14s] DEBUG: Starting new display for greeter
[+0.14s] DEBUG: Starting local X display
[+0.15s] DEBUG: X server :0 will replace Plymouth
[+0.17s] DEBUG: Using VT 7
[+0.17s] DEBUG: Activating VT 7
[+0.17s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+0.49s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0
[+0.49s] DEBUG: Launching X Server
[+0.49s] DEBUG: Launching process 1697: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none
[+0.50s] DEBUG: Waiting for ready signal from X server :0
[+0.50s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.50s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+4.03s] DEBUG: Got signal 10 from process 1697
[+4.03s] DEBUG: Got signal from X server :0
[+4.03s] DEBUG: Stopping Plymouth, X server is ready
[+4.06s] DEBUG: Connecting to XServer :0
[+4.06s] DEBUG: Starting greeter
[+4.06s] DEBUG: Started session 1858 with service 'lightdm', username 'lightdm'
[+5.19s] DEBUG: Session 1858 authentication complete with return value 0: Success
[+5.19s] DEBUG: Greeter authorized
[+5.19s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+5.27s] DEBUG: Session 1858 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter
[+5.71s] DEBUG: Greeter closed communication channel
[+5.71s] DEBUG: Session 1858 exited with return value 1
[+5.71s] DEBUG: Greeter quit
[+5.71s] DEBUG: Failed to start greeter
[+5.71s] DEBUG: Stopping display
[+5.71s] DEBUG: Sending signal 15 to process 1697
[+6.43s] DEBUG: Process 1697 exited with return value 0
[+6.43s] DEBUG: X server stopped
[+6.43s] DEBUG: Removing X server authority /var/run/lightdm/root/:0
[+6.43s] DEBUG: Releasing VT 7
[+6.43s] DEBUG: Display server stopped
[+6.43s] DEBUG: Display stopped
[+6.43s] DEBUG: Stopping X local seat, failed to start a display
[+6.43s] DEBUG: Stopping seat
[+6.43s] DEBUG: Seat stopped
[+6.43s] DEBUG: Required seat has stopped
[+6.43s] DEBUG: Stopping display manager
[+6.43s] DEBUG: Display manager stopped
[+6.43s] DEBUG: Stopping daemon
[+6.43s] DEBUG: Exiting with return value 1
ACER ASPIRE 5920G-934G32Bn, Intel Core 2 Duo T9300 (2.5 GHz FSB, 6MB L2 Cache, 800 MHz FSB), 4GB (2x2 GB) DDR2, Nvidia, GEFORCE 9500M-GS 512MB, 15.4 WXGA CB,802.11N - http://www.motorcyclegloves.info
Alexandros
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 964
Εγγραφή: 08 Ιούλ 2008, 14:07
Εκτύπωση

Re: Low resolution mode

Δημοσίευσηαπό Alexandros » 19 Φεβ 2015, 15:20

lspci-vvnn.txt
Κώδικας: Επιλογή όλων
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: [e0] Vendor Specific Information: Len=0a <?>
   Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 43
   Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
   Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
   Region 4: I/O ports at 4110 [size=8]
   Expansion ROM at <unassigned> [disabled]
   Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
      Address: fee0100c  Data: 41d1
   Capabilities: [d0] Power Management version 3
      Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: i915
   Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Region 0: Memory at 92400000 (64-bit, non-prefetchable) [size=1M]
   Capabilities: [d0] Power Management version 3
      Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 16
   Region 4: I/O ports at 40e0 [size=32]
   Capabilities: [50] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 21
   Region 4: I/O ports at 40c0 [size=32]
   Capabilities: [50] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin D routed to IRQ 19
   Region 0: Memory at 94505c00 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [50] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [58] Debug port: BAR=1 offset=00a0
   Capabilities: [98] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 45
   Region 0: Memory at 94500000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
      Address: 00000000fee0100c  Data: 4142
   Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE- FLReset+
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
         ClockPM- Surprise- LLActRep- BwNot-
      LnkCtl:   ASPM Disabled; Disabled- Retrain- CommClk-
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
   Capabilities: [100 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed- WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
         Status:   NegoPending- InProgress-
      VC1:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=1 ArbSelect=Fixed TC/VC=00
         Status:   NegoPending- InProgress-
   Capabilities: [130 v1] Root Complex Link
      Desc:   PortNumber=0f ComponentID=02 EltType=Config
      Link0:   Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
         Addr:   00000000fed1c000
   Kernel driver in use: snd_hda_intel
   Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: 93500000-944fffff
   Prefetchable memory behind bridge: 0000000090400000-00000000913fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
         ClockPM- Surprise- LLActRep+ BwNot-
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
         Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet+ LinkState+
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
      Address: fee0100c  Data: 41a1
   Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1605]
   Capabilities: [a0] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [100 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed+ WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
         Status:   NegoPending- InProgress-
   Capabilities: [180 v1] Root Complex Link
      Desc:   PortNumber=01 ComponentID=02 EltType=Config
      Link0:   Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
         Addr:   00000000fed1c000
   Kernel driver in use: pcieport
   Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   I/O behind bridge: 00002000-00002fff
   Memory behind bridge: 92500000-934fffff
   Prefetchable memory behind bridge: 0000000091400000-00000000923fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
         ClockPM- Surprise- LLActRep+ BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
         Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet+ LinkState+
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
      Address: fee0100c  Data: 41b1
   Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:1605]
   Capabilities: [a0] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [100 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed+ WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
         Status:   NegoPending- InProgress-
   Capabilities: [180 v1] Root Complex Link
      Desc:   PortNumber=02 ComponentID=02 EltType=Config
      Link0:   Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
         Addr:   00000000fed1c000
   Kernel driver in use: pcieport
   Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 20
   Region 4: I/O ports at 40a0 [size=32]
   Capabilities: [50] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 19
   Region 4: I/O ports at 4080 [size=32]
   Capabilities: [50] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin D routed to IRQ 16
   Region 4: I/O ports at 4060 [size=32]
   Capabilities: [50] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin C routed to IRQ 18
   Region 4: I/O ports at 4040 [size=32]
   Capabilities: [50] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at 94505800 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [50] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [58] Debug port: BAR=1 offset=00a0
   Capabilities: [98] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
   Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:1605]

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: [e0] Vendor Specific Information: Len=0c <?>
   Kernel driver in use: lpc_ich
   Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 44
   Region 0: I/O ports at 4108 [size=8]
   Region 1: I/O ports at 411c [size=4]
   Region 2: I/O ports at 4100 [size=8]
   Region 3: I/O ports at 4118 [size=4]
   Region 4: I/O ports at 4020 [size=32]
   Region 5: Memory at 94505000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
      Address: fee0100c  Data: 41e1
   Capabilities: [70] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
   Capabilities: [b0] PCI Advanced Features
      AFCap: TP+ FLR+
      AFCtrl: FLR-
      AFStatus: TP-
   Kernel driver in use: ahci
   Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin C routed to IRQ 11
   Region 0: Memory at 94506000 (64-bit, non-prefetchable) [size=256]
   Region 4: I/O ports at 4000 [size=32]
   Kernel modules: i2c-i801

00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin C routed to IRQ 11
   Region 0: Memory at 94504000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: [50] Power Management version 3
      Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller [10ec:8171] (rev 10)
   Subsystem: Hewlett-Packard Company Device [103c:1467]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: I/O ports at 3000 [size=256]
   Region 1: Memory at 93500000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: [40] Power Management version 3
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
      Address: 0000000000000000  Data: 0000
   Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
         ClockPM+ Surprise- LLActRep- BwNot-
      LnkCtl:   ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
   Capabilities: [100 v1] Advanced Error Reporting
      UESta:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UEMsk:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UESvrt:   DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
      CESta:   RxErr+ BadTLP- BadDLLP- Rollover- Timeout+ NonFatalErr+
      CEMsk:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
      AERCap:   First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
   Capabilities: [140 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed- WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
         Status:   NegoPending- InProgress-
   Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
   Kernel driver in use: rtl8192se
   Kernel modules: rtl8192se

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
   Subsystem: Hewlett-Packard Company Device [103c:1605]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 42
   Region 0: I/O ports at 2000 [size=256]
   Region 2: Memory at 91410000 (64-bit, prefetchable) [size=4K]
   Region 4: Memory at 91400000 (64-bit, prefetchable) [size=64K]
   Expansion ROM at 91420000 [disabled] [size=64K]
   Capabilities: [40] Power Management version 3
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
      Address: 00000000fee0100c  Data: 41c1
   Capabilities: [70] Express (v2) Endpoint, MSI 01
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 4096 bytes
      DevSta:   CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
         ClockPM+ Surprise- LLActRep- BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      DevCap2: Completion Timeout: Not Supported, TimeoutDis+
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -6dB
   Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
      Vector table: BAR=4 offset=00000000
      PBA: BAR=4 offset=00000800
   Capabilities: [cc] Vital Product Data
      Unknown small resource type 00, will not decode more.
   Capabilities: [100 v1] Advanced Error Reporting
      UESta:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UEMsk:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UESvrt:   DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
      CESta:   RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
      CEMsk:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
      AERCap:   First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
   Capabilities: [140 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed- WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
         Status:   NegoPending- InProgress-
   Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
   Kernel driver in use: r8169
   Kernel modules: r8169
ACER ASPIRE 5920G-934G32Bn, Intel Core 2 Duo T9300 (2.5 GHz FSB, 6MB L2 Cache, 800 MHz FSB), 4GB (2x2 GB) DDR2, Nvidia, GEFORCE 9500M-GS 512MB, 15.4 WXGA CB,802.11N - http://www.motorcyclegloves.info
Alexandros
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 964
Εγγραφή: 08 Ιούλ 2008, 14:07
Εκτύπωση

Re: Low resolution mode

Δημοσίευσηαπό Alexandros » 19 Φεβ 2015, 15:21

Xorg.0.log
Κώδικας: Επιλογή όλων
[    63.699]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    63.699] X Protocol Version 11, Revision 0
[    63.699] Build Operating System: Linux 2.6.42-61-generic x86_64 Ubuntu
[    63.699] Current Operating System: Linux ubuntu 3.13.0-45-generic #74~precise1-Ubuntu SMP Thu Jan 15 20:21:55 UTC 2015 x86_64
[    63.699] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-45-generic root=/dev/mapper/sda6_crypt ro quiet splash vt.handoff=7
[    63.699] Build Date: 12 February 2015  02:49:01PM
[    63.699] xorg-server 2:1.11.4-0ubuntu10.17 (For technical support please see http://www.ubuntu.com/support)
[    63.699] Current version of pixman: 0.30.2
[    63.699]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    63.699] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    63.699] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 19 12:00:28 2015
[    63.846] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    63.989] (==) No Layout section.  Using the first Screen section.
[    63.989] (==) No screen section available. Using defaults.
[    63.989] (**) |-->Screen "Default Screen Section" (0)
[    63.989] (**) |   |-->Monitor "<default monitor>"
[    64.014] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    64.014] (==) Automatically adding devices
[    64.014] (==) Automatically enabling devices
[    64.047] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    64.047]    Entry deleted from font path.
[    64.047] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    64.047]    Entry deleted from font path.
[    64.047] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    64.047]    Entry deleted from font path.
[    64.076] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    64.076]    Entry deleted from font path.
[    64.076] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    64.076]    Entry deleted from font path.
[    64.076] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    64.076]    Entry deleted from font path.
[    64.076] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/Type1,
   built-ins
[    64.076] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    64.076] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    64.076] (II) Loader magic: 0x7f1addcb3b00
[    64.076] (II) Module ABI versions:
[    64.076]    X.Org ANSI C Emulation: 0.4
[    64.076]    X.Org Video Driver: 11.0
[    64.076]    X.Org XInput driver : 16.0
[    64.076]    X.Org Server Extension : 6.0
[    64.077] (--) PCI:*(0:0:2:0) 8086:2a42:103c:1605 rev 7, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00004110/8
[    64.077] (--) PCI: (0:0:2:1) 8086:2a43:103c:1605 rev 7, Mem @ 0x92400000/1048576
[    64.077] (II) Open ACPI successful (/var/run/acpid.socket)
[    64.077] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    64.077] (II) "extmod" will be loaded by default.
[    64.077] (II) "dbe" will be loaded by default.
[    64.077] (II) "glx" will be loaded by default.
[    64.077] (II) "record" will be loaded by default.
[    64.077] (II) "dri" will be loaded by default.
[    64.077] (II) "dri2" will be loaded by default.
[    64.077] (II) LoadModule: "extmod"
[    64.154] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    64.225] (II) Module extmod: vendor="X.Org Foundation"
[    64.225]    compiled for 1.11.3, module version = 1.0.0
[    64.225]    Module class: X.Org Server Extension
[    64.225]    ABI class: X.Org Server Extension, version 6.0
[    64.225] (II) Loading extension MIT-SCREEN-SAVER
[    64.225] (II) Loading extension XFree86-VidModeExtension
[    64.225] (II) Loading extension XFree86-DGA
[    64.225] (II) Loading extension DPMS
[    64.225] (II) Loading extension XVideo
[    64.225] (II) Loading extension XVideo-MotionCompensation
[    64.225] (II) Loading extension X-Resource
[    64.225] (II) LoadModule: "dbe"
[    64.225] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    64.255] (II) Module dbe: vendor="X.Org Foundation"
[    64.255]    compiled for 1.11.3, module version = 1.0.0
[    64.255]    Module class: X.Org Server Extension
[    64.255]    ABI class: X.Org Server Extension, version 6.0
[    64.255] (II) Loading extension DOUBLE-BUFFER
[    64.255] (II) LoadModule: "glx"
[    64.255] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    65.289] (II) Module glx: vendor="NVIDIA Corporation"
[    65.289]    compiled for 4.0.2, module version = 1.0.0
[    65.289]    Module class: X.Org Server Extension
[    65.289] (II) NVIDIA GLX Module  304.125  Mon Dec  1 20:22:48 PST 2014
[    65.289] (II) Loading extension GLX
[    65.289] (II) LoadModule: "record"
[    65.289] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    65.311] (II) Module record: vendor="X.Org Foundation"
[    65.311]    compiled for 1.11.3, module version = 1.13.0
[    65.311]    Module class: X.Org Server Extension
[    65.311]    ABI class: X.Org Server Extension, version 6.0
[    65.311] (II) Loading extension RECORD
[    65.311] (II) LoadModule: "dri"
[    65.311] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    65.330] (II) Module dri: vendor="X.Org Foundation"
[    65.330]    compiled for 1.11.3, module version = 1.0.0
[    65.330]    ABI class: X.Org Server Extension, version 6.0
[    65.330] (II) Loading extension XFree86-DRI
[    65.330] (II) LoadModule: "dri2"
[    65.331] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    65.331] (II) Module dri2: vendor="X.Org Foundation"
[    65.331]    compiled for 1.11.3, module version = 1.2.0
[    65.332]    ABI class: X.Org Server Extension, version 6.0
[    65.332] (II) Loading extension DRI2
[    65.332] (==) Matched intel as autoconfigured driver 0
[    65.332] (==) Matched vesa as autoconfigured driver 1
[    65.332] (==) Matched fbdev as autoconfigured driver 2
[    65.332] (==) Assigned the driver to the xf86ConfigLayout
[    65.332] (II) LoadModule: "intel"
[    65.388] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    65.421] (II) Module intel: vendor="X.Org Foundation"
[    65.421]    compiled for 1.11.3, module version = 2.17.0
[    65.421]    Module class: X.Org Video Driver
[    65.421]    ABI class: X.Org Video Driver, version 11.0
[    65.421] (II) LoadModule: "vesa"
[    65.422] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    65.432] (II) Module vesa: vendor="X.Org Foundation"
[    65.432]    compiled for 1.11.3, module version = 2.3.0
[    65.432]    Module class: X.Org Video Driver
[    65.432]    ABI class: X.Org Video Driver, version 11.0
[    65.432] (II) LoadModule: "fbdev"
[    65.433] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    65.439] (II) Module fbdev: vendor="X.Org Foundation"
[    65.439]    compiled for 1.11.3, module version = 0.4.2
[    65.439]    ABI class: X.Org Video Driver, version 11.0
[    65.439] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
   Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
   Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
   Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
   Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
   Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
   Ivybridge Server (GT2)
[    65.439] (II) VESA: driver for VESA chipsets: vesa
[    65.439] (II) FBDEV: driver for framebuffer: fbdev
[    65.439] (++) using VT number 7

[    65.442] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    65.442] (WW) Falling back to old probe method for vesa
[    65.442] (WW) Falling back to old probe method for fbdev
[    65.442] (II) Loading sub module "fbdevhw"
[    65.442] (II) LoadModule: "fbdevhw"
[    65.442] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    65.457] (II) Module fbdevhw: vendor="X.Org Foundation"
[    65.457]    compiled for 1.11.3, module version = 0.0.2
[    65.458]    ABI class: X.Org Video Driver, version 11.0
[    65.458] drmOpenDevice: node name is /dev/dri/card0
[    65.458] drmOpenDevice: open result is 9, (OK)
[    65.458] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    65.458] drmOpenDevice: node name is /dev/dri/card0
[    65.458] drmOpenDevice: open result is 9, (OK)
[    65.458] drmOpenByBusid: drmOpenMinor returns 9
[    65.458] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    65.458] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    65.458] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    65.458] (==) intel(0): RGB weight 888
[    65.458] (==) intel(0): Default visual is TrueColor
[    65.458] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    65.458] (--) intel(0): Chipset: "GM45"
[    65.458] (**) intel(0): Relaxed fencing enabled
[    65.458] (**) intel(0): Wait on SwapBuffers? enabled
[    65.458] (**) intel(0): Triple buffering? enabled
[    65.458] (**) intel(0): Framebuffer tiled
[    65.458] (**) intel(0): Pixmaps tiled
[    65.458] (**) intel(0): 3D buffers tiled
[    65.458] (**) intel(0): SwapBuffers wait enabled
[    65.458] (==) intel(0): video overlay key set to 0x101fe
[    65.458] (II) intel(0): Output LVDS1 has no monitor section
[    65.458] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    65.488] (II) intel(0): Output VGA1 has no monitor section
[    65.496] (II) intel(0): Output HDMI1 has no monitor section
[    65.544] (II) intel(0): Output DP1 has no monitor section
[    65.592] (II) intel(0): Output DP2 has no monitor section
[    65.592] (II) intel(0): EDID for output LVDS1
[    65.592] (II) intel(0): Manufacturer: CMO  Model: 1593  Serial#: 0
[    65.592] (II) intel(0): Year: 2010  Week: 8
[    65.592] (II) intel(0): EDID Version: 1.3
[    65.592] (II) intel(0): Digital Display Input
[    65.592] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    65.592] (II) intel(0): Gamma: 2.20
[    65.592] (II) intel(0): No DPMS capabilities specified
[    65.592] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    65.592] (II) intel(0): First detailed timing is preferred mode
[    65.592] (II) intel(0): redX: 0.577 redY: 0.364   greenX: 0.348 greenY: 0.563
[    65.592] (II) intel(0): blueX: 0.151 blueY: 0.116   whiteX: 0.313 whiteY: 0.329
[    65.592] (II) intel(0): Manufacturer's mask: 0
[    65.592] (II) intel(0): Supported detailed timing:
[    65.592] (II) intel(0): clock: 69.3 MHz   Image Size:  344 x 193 mm
[    65.592] (II) intel(0): h_active: 1366  h_sync: 1382  h_sync_end 1416 h_blank_end 1466 h_border: 0
[    65.592] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 776 v_blanking: 788 v_border: 0
[    65.592] (II) intel(0):  N156B3-L0B
[    65.592] (II) intel(0):  CMO
[    65.592] (II) intel(0):  N156B3-L0B
[    65.592] (II) intel(0): EDID (in hex):
[    65.592] (II) intel(0):    00ffffffffffff000daf931500000000
[    65.592] (II) intel(0):    08140103802213780ad1f5935d599026
[    65.592] (II) intel(0):    1d505400000001010101010101010101
[    65.592] (II) intel(0):    010101010101121b5664500014301022
[    65.592] (II) intel(0):    260058c110000018000000fe004e3135
[    65.592] (II) intel(0):    3642332d4c30420a2020000000fe0043
[    65.592] (II) intel(0):    4d4f0a202020202020202020000000fe
[    65.592] (II) intel(0):    004e31353642332d4c30420a20200076
[    65.592] (II) intel(0): EDID vendor "CMO", prod id 5523
[    65.592] (II) intel(0): Printing DDC gathered Modelines:
[    65.592] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1382 1416 1466  768 770 776 788 -hsync -vsync (47.3 kHz)
[    65.592] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    65.592] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    65.592] (II) intel(0): Printing probed modes for output LVDS1
[    65.592] (II) intel(0): Modeline "1366x768"x60.0   69.30  1366 1382 1416 1466  768 770 776 788 -hsync -vsync (47.3 kHz)
[    65.592] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    65.592] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[    65.592] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    65.592] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    65.592] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    65.592] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    65.616] (II) intel(0): EDID for output VGA1
[    65.624] (II) intel(0): EDID for output HDMI1
[    65.672] (II) intel(0): EDID for output DP1
[    65.720] (II) intel(0): EDID for output DP2
[    65.720] (II) intel(0): Output LVDS1 connected
[    65.720] (II) intel(0): Output VGA1 disconnected
[    65.720] (II) intel(0): Output HDMI1 disconnected
[    65.720] (II) intel(0): Output DP1 disconnected
[    65.720] (II) intel(0): Output DP2 disconnected
[    65.720] (II) intel(0): Using exact sizes for initial modes
[    65.720] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    65.720] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    65.720] (II) intel(0): Kernel page flipping support detected, enabling
[    65.720] (**) intel(0): Display dimensions: (340, 190) mm
[    65.720] (**) intel(0): DPI set to (102, 102)
[    65.720] (II) Loading sub module "fb"
[    65.720] (II) LoadModule: "fb"
[    65.720] (II) Loading /usr/lib/xorg/modules/libfb.so
[    65.736] (II) Module fb: vendor="X.Org Foundation"
[    65.736]    compiled for 1.11.3, module version = 1.0.0
[    65.736]    ABI class: X.Org ANSI C Emulation, version 0.4
[    65.736] (II) Loading sub module "dri2"
[    65.736] (II) LoadModule: "dri2"
[    65.737] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    65.737] (II) Module dri2: vendor="X.Org Foundation"
[    65.737]    compiled for 1.11.3, module version = 1.2.0
[    65.737]    ABI class: X.Org Server Extension, version 6.0
[    65.737] (II) UnloadModule: "vesa"
[    65.737] (II) Unloading vesa
[    65.737] (II) UnloadModule: "fbdev"
[    65.737] (II) Unloading fbdev
[    65.737] (II) UnloadModule: "fbdevhw"
[    65.737] (II) Unloading fbdevhw
[    65.737] (==) Depth 24 pixmap format is 32 bpp
[    65.737] (II) intel(0): [DRI2] Setup complete
[    65.737] (II) intel(0): [DRI2]   DRI driver: i965
[    65.737] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    65.752] (II) UXA(0): Driver registered support for the following operations:
[    65.752] (II)         solid
[    65.752] (II)         copy
[    65.752] (II)         composite (RENDER acceleration)
[    65.752] (II)         put_image
[    65.752] (II)         get_image
[    65.752] (==) intel(0): Backing store disabled
[    65.752] (==) intel(0): Silken mouse enabled
[    65.752] (II) intel(0): Initializing HW Cursor
[    65.788] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    65.791] (==) intel(0): DPMS enabled
[    65.792] (==) intel(0): Intel XvMC decoder enabled
[    65.792] (II) intel(0): Set up textured video
[    65.792] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    65.792] (II) intel(0): direct rendering: DRI2 Enabled
[    65.792] (==) intel(0): hotplug detection: "enabled"
[    65.792] (--) RandR disabled
[    65.792] (II) Initializing built-in extension Generic Event Extension
[    65.792] (II) Initializing built-in extension SHAPE
[    65.792] (II) Initializing built-in extension MIT-SHM
[    65.792] (II) Initializing built-in extension XInputExtension
[    65.792] (II) Initializing built-in extension XTEST
[    65.792] (II) Initializing built-in extension BIG-REQUESTS
[    65.792] (II) Initializing built-in extension SYNC
[    65.792] (II) Initializing built-in extension XKEYBOARD
[    65.792] (II) Initializing built-in extension XC-MISC
[    65.792] (II) Initializing built-in extension SECURITY
[    65.792] (II) Initializing built-in extension XINERAMA
[    65.792] (II) Initializing built-in extension XFIXES
[    65.792] (II) Initializing built-in extension RENDER
[    65.792] (II) Initializing built-in extension RANDR
[    65.792] (II) Initializing built-in extension COMPOSITE
[    65.792] (II) Initializing built-in extension DAMAGE
[    65.807] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    65.813] (II) intel(0): Setting screen physical size to 361 x 203
[    65.935] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    65.945] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    65.945] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    65.945] (II) LoadModule: "evdev"
[    65.945] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    65.977] (II) Module evdev: vendor="X.Org Foundation"
[    65.977]    compiled for 1.11.3, module version = 2.7.0
[    65.977]    Module class: X.Org XInput Driver
[    65.977]    ABI class: X.Org XInput driver, version 16.0
[    65.977] (II) Using input driver 'evdev' for 'Power Button'
[    65.977] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    65.977] (**) Power Button: always reports core events
[    65.977] (**) evdev: Power Button: Device: "/dev/input/event2"
[    65.978] (--) evdev: Power Button: Vendor 0 Product 0x1
[    65.978] (--) evdev: Power Button: Found keys
[    65.978] (II) evdev: Power Button: Configuring as keyboard
[    65.978] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    65.978] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    65.978] (**) Option "xkb_rules" "evdev"
[    65.978] (**) Option "xkb_model" "pc105"
[    65.978] (**) Option "xkb_layout" "us"
[    65.978] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    65.978] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    65.978] (II) Using input driver 'evdev' for 'Video Bus'
[    65.978] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    65.978] (**) Video Bus: always reports core events
[    65.978] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    65.978] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    65.978] (--) evdev: Video Bus: Found keys
[    65.978] (II) evdev: Video Bus: Configuring as keyboard
[    65.978] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event4"
[    65.978] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    65.978] (**) Option "xkb_rules" "evdev"
[    65.979] (**) Option "xkb_model" "pc105"
[    65.979] (**) Option "xkb_layout" "us"
[    65.979] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    65.979] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    65.979] (II) Using input driver 'evdev' for 'Power Button'
[    65.979] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    65.979] (**) Power Button: always reports core events
[    65.979] (**) evdev: Power Button: Device: "/dev/input/event0"
[    65.979] (--) evdev: Power Button: Vendor 0 Product 0x1
[    65.979] (--) evdev: Power Button: Found keys
[    65.979] (II) evdev: Power Button: Configuring as keyboard
[    65.979] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    65.979] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    65.979] (**) Option "xkb_rules" "evdev"
[    65.979] (**) Option "xkb_model" "pc105"
[    65.979] (**) Option "xkb_layout" "us"
[    65.980] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    65.980] (II) No input driver specified, ignoring this device.
[    65.980] (II) This device may have been added with another device file.
[    65.980] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[    65.980] (II) No input driver specified, ignoring this device.
[    65.980] (II) This device may have been added with another device file.
[    65.980] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[    65.981] (II) No input driver specified, ignoring this device.
[    65.981] (II) This device may have been added with another device file.
[    65.981] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    65.981] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    65.981] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    65.981] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    65.981] (**) AT Translated Set 2 keyboard: always reports core events
[    65.981] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    65.981] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    65.981] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    65.981] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    65.981] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    65.981] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    65.981] (**) Option "xkb_rules" "evdev"
[    65.981] (**) Option "xkb_model" "pc105"
[    65.981] (**) Option "xkb_layout" "us"
[    65.982] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    65.982] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    65.982] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    65.982] (II) LoadModule: "synaptics"
[    65.982] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    65.993] (II) Module synaptics: vendor="X.Org Foundation"
[    65.993]    compiled for 1.11.3, module version = 1.6.2
[    65.993]    Module class: X.Org XInput Driver
[    65.993]    ABI class: X.Org XInput driver, version 16.0
[    65.993] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    65.993] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    65.993] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    65.993] (**) Option "Device" "/dev/input/event8"
[    65.994] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    65.994] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    65.994] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4844
[    65.994] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    65.994] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    65.994] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    65.994] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    65.994] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    65.994] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    65.994] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event8"
[    65.994] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[    65.994] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    65.994] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    65.994] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    65.994] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    65.994] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    65.994] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    65.994] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    65.994] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    65.994] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    65.994] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    65.997] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[    65.997] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    65.997] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    65.997] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    65.997] (**) HP WMI hotkeys: always reports core events
[    65.997] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event5"
[    65.997] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    65.997] (--) evdev: HP WMI hotkeys: Found keys
[    65.997] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    65.997] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event5"
[    65.997] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 11)
[    65.997] (**) Option "xkb_rules" "evdev"
[    65.997] (**) Option "xkb_model" "pc105"
[    65.997] (**) Option "xkb_layout" "us"
[    67.698] (II) evdev: Power Button: Close
[    67.698] (II) UnloadModule: "evdev"
[    67.698] (II) Unloading evdev
[    67.698] (II) evdev: Video Bus: Close
[    67.698] (II) UnloadModule: "evdev"
[    67.698] (II) Unloading evdev
[    67.698] (II) evdev: Power Button: Close
[    67.698] (II) UnloadModule: "evdev"
[    67.698] (II) Unloading evdev
[    67.698] (II) evdev: AT Translated Set 2 keyboard: Close
[    67.698] (II) UnloadModule: "evdev"
[    67.698] (II) Unloading evdev
[    67.698] (II) UnloadModule: "synaptics"
[    67.698] (II) Unloading synaptics
[    67.698] (II) evdev: HP WMI hotkeys: Close
[    67.698] (II) UnloadModule: "evdev"
[    67.698] (II) Unloading evdev
[    68.394]  ddxSigGiveUp: Closing log
[    68.394] Server terminated successfully (0). Closing log file.



Xorg.0.log.old
Κώδικας: Επιλογή όλων
[    75.626]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    75.626] X Protocol Version 11, Revision 0
[    75.626] Build Operating System: Linux 2.6.42-61-generic x86_64 Ubuntu
[    75.626] Current Operating System: Linux ubuntu 3.13.0-45-generic #74~precise1-Ubuntu SMP Thu Jan 15 20:21:55 UTC 2015 x86_64
[    75.626] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-45-generic root=/dev/mapper/sda6_crypt ro quiet splash vt.handoff=7
[    75.626] Build Date: 12 February 2015  02:49:01PM
[    75.626] xorg-server 2:1.11.4-0ubuntu10.17 (For technical support please see http://www.ubuntu.com/support)
[    75.626] Current version of pixman: 0.30.2
[    75.626]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    75.626] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    75.626] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 18 22:29:23 2015
[    75.765] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    75.877] (==) No Layout section.  Using the first Screen section.
[    75.877] (==) No screen section available. Using defaults.
[    75.877] (**) |-->Screen "Default Screen Section" (0)
[    75.877] (**) |   |-->Monitor "<default monitor>"
[    75.935] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    75.935] (==) Automatically adding devices
[    75.935] (==) Automatically enabling devices
[    75.957] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    75.957]    Entry deleted from font path.
[    75.957] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    75.957]    Entry deleted from font path.
[    75.957] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    75.957]    Entry deleted from font path.
[    75.997] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    75.997]    Entry deleted from font path.
[    75.997] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    75.997]    Entry deleted from font path.
[    75.997] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    75.997]    Entry deleted from font path.
[    75.997] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/Type1,
   built-ins
[    75.997] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    75.997] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    75.997] (II) Loader magic: 0x7f80cba26b00
[    75.997] (II) Module ABI versions:
[    75.997]    X.Org ANSI C Emulation: 0.4
[    75.997]    X.Org Video Driver: 11.0
[    75.997]    X.Org XInput driver : 16.0
[    75.997]    X.Org Server Extension : 6.0
[    75.998] (--) PCI:*(0:0:2:0) 8086:2a42:103c:1605 rev 7, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00004110/8
[    75.998] (--) PCI: (0:0:2:1) 8086:2a43:103c:1605 rev 7, Mem @ 0x92400000/1048576
[    75.998] (II) Open ACPI successful (/var/run/acpid.socket)
[    75.998] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    75.998] (II) "extmod" will be loaded by default.
[    75.998] (II) "dbe" will be loaded by default.
[    75.998] (II) "glx" will be loaded by default.
[    75.998] (II) "record" will be loaded by default.
[    75.998] (II) "dri" will be loaded by default.
[    75.998] (II) "dri2" will be loaded by default.
[    75.998] (II) LoadModule: "extmod"
[    76.142] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    76.233] (II) Module extmod: vendor="X.Org Foundation"
[    76.233]    compiled for 1.11.3, module version = 1.0.0
[    76.233]    Module class: X.Org Server Extension
[    76.233]    ABI class: X.Org Server Extension, version 6.0
[    76.233] (II) Loading extension MIT-SCREEN-SAVER
[    76.233] (II) Loading extension XFree86-VidModeExtension
[    76.233] (II) Loading extension XFree86-DGA
[    76.233] (II) Loading extension DPMS
[    76.233] (II) Loading extension XVideo
[    76.233] (II) Loading extension XVideo-MotionCompensation
[    76.233] (II) Loading extension X-Resource
[    76.233] (II) LoadModule: "dbe"
[    76.233] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    76.276] (II) Module dbe: vendor="X.Org Foundation"
[    76.276]    compiled for 1.11.3, module version = 1.0.0
[    76.276]    Module class: X.Org Server Extension
[    76.276]    ABI class: X.Org Server Extension, version 6.0
[    76.276] (II) Loading extension DOUBLE-BUFFER
[    76.276] (II) LoadModule: "glx"
[    76.276] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    77.254] (II) Module glx: vendor="NVIDIA Corporation"
[    77.254]    compiled for 4.0.2, module version = 1.0.0
[    77.254]    Module class: X.Org Server Extension
[    77.254] (II) NVIDIA GLX Module  304.125  Mon Dec  1 20:22:48 PST 2014
[    77.254] (II) Loading extension GLX
[    77.254] (II) LoadModule: "record"
[    77.254] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    77.265] (II) Module record: vendor="X.Org Foundation"
[    77.265]    compiled for 1.11.3, module version = 1.13.0
[    77.265]    Module class: X.Org Server Extension
[    77.265]    ABI class: X.Org Server Extension, version 6.0
[    77.265] (II) Loading extension RECORD
[    77.265] (II) LoadModule: "dri"
[    77.265] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    77.285] (II) Module dri: vendor="X.Org Foundation"
[    77.285]    compiled for 1.11.3, module version = 1.0.0
[    77.285]    ABI class: X.Org Server Extension, version 6.0
[    77.285] (II) Loading extension XFree86-DRI
[    77.285] (II) LoadModule: "dri2"
[    77.285] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    77.286] (II) Module dri2: vendor="X.Org Foundation"
[    77.286]    compiled for 1.11.3, module version = 1.2.0
[    77.286]    ABI class: X.Org Server Extension, version 6.0
[    77.286] (II) Loading extension DRI2
[    77.286] (==) Matched intel as autoconfigured driver 0
[    77.286] (==) Matched vesa as autoconfigured driver 1
[    77.286] (==) Matched fbdev as autoconfigured driver 2
[    77.286] (==) Assigned the driver to the xf86ConfigLayout
[    77.286] (II) LoadModule: "intel"
[    77.331] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    77.365] (II) Module intel: vendor="X.Org Foundation"
[    77.365]    compiled for 1.11.3, module version = 2.17.0
[    77.365]    Module class: X.Org Video Driver
[    77.365]    ABI class: X.Org Video Driver, version 11.0
[    77.365] (II) LoadModule: "vesa"
[    77.365] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    77.375] (II) Module vesa: vendor="X.Org Foundation"
[    77.376]    compiled for 1.11.3, module version = 2.3.0
[    77.376]    Module class: X.Org Video Driver
[    77.376]    ABI class: X.Org Video Driver, version 11.0
[    77.376] (II) LoadModule: "fbdev"
[    77.376] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    77.382] (II) Module fbdev: vendor="X.Org Foundation"
[    77.382]    compiled for 1.11.3, module version = 0.4.2
[    77.382]    ABI class: X.Org Video Driver, version 11.0
[    77.382] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
   Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
   Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
   Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
   Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
   Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
   Ivybridge Server (GT2)
[    77.382] (II) VESA: driver for VESA chipsets: vesa
[    77.382] (II) FBDEV: driver for framebuffer: fbdev
[    77.382] (++) using VT number 7

[    77.385] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    77.385] (WW) Falling back to old probe method for vesa
[    77.385] (WW) Falling back to old probe method for fbdev
[    77.385] (II) Loading sub module "fbdevhw"
[    77.385] (II) LoadModule: "fbdevhw"
[    77.385] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    77.401] (II) Module fbdevhw: vendor="X.Org Foundation"
[    77.401]    compiled for 1.11.3, module version = 0.0.2
[    77.401]    ABI class: X.Org Video Driver, version 11.0
[    77.401] drmOpenDevice: node name is /dev/dri/card0
[    77.401] drmOpenDevice: open result is 9, (OK)
[    77.401] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    77.401] drmOpenDevice: node name is /dev/dri/card0
[    77.401] drmOpenDevice: open result is 9, (OK)
[    77.401] drmOpenByBusid: drmOpenMinor returns 9
[    77.401] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    77.401] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    77.401] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    77.401] (==) intel(0): RGB weight 888
[    77.401] (==) intel(0): Default visual is TrueColor
[    77.401] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    77.401] (--) intel(0): Chipset: "GM45"
[    77.401] (**) intel(0): Relaxed fencing enabled
[    77.401] (**) intel(0): Wait on SwapBuffers? enabled
[    77.401] (**) intel(0): Triple buffering? enabled
[    77.401] (**) intel(0): Framebuffer tiled
[    77.401] (**) intel(0): Pixmaps tiled
[    77.401] (**) intel(0): 3D buffers tiled
[    77.401] (**) intel(0): SwapBuffers wait enabled
[    77.401] (==) intel(0): video overlay key set to 0x101fe
[    77.401] (II) intel(0): Output LVDS1 has no monitor section
[    77.401] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    77.432] (II) intel(0): Output VGA1 has no monitor section
[    77.440] (II) intel(0): Output HDMI1 has no monitor section
[    77.440] (II) intel(0): Output DP1 has no monitor section
[    77.440] (II) intel(0): Output DP2 has no monitor section
[    77.440] (II) intel(0): EDID for output LVDS1
[    77.440] (II) intel(0): Manufacturer: CMO  Model: 1593  Serial#: 0
[    77.440] (II) intel(0): Year: 2010  Week: 8
[    77.440] (II) intel(0): EDID Version: 1.3
[    77.440] (II) intel(0): Digital Display Input
[    77.440] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    77.440] (II) intel(0): Gamma: 2.20
[    77.440] (II) intel(0): No DPMS capabilities specified
[    77.440] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    77.440] (II) intel(0): First detailed timing is preferred mode
[    77.440] (II) intel(0): redX: 0.577 redY: 0.364   greenX: 0.348 greenY: 0.563
[    77.440] (II) intel(0): blueX: 0.151 blueY: 0.116   whiteX: 0.313 whiteY: 0.329
[    77.440] (II) intel(0): Manufacturer's mask: 0
[    77.440] (II) intel(0): Supported detailed timing:
[    77.440] (II) intel(0): clock: 69.3 MHz   Image Size:  344 x 193 mm
[    77.440] (II) intel(0): h_active: 1366  h_sync: 1382  h_sync_end 1416 h_blank_end 1466 h_border: 0
[    77.440] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 776 v_blanking: 788 v_border: 0
[    77.440] (II) intel(0):  N156B3-L0B
[    77.440] (II) intel(0):  CMO
[    77.440] (II) intel(0):  N156B3-L0B
[    77.440] (II) intel(0): EDID (in hex):
[    77.440] (II) intel(0):    00ffffffffffff000daf931500000000
[    77.440] (II) intel(0):    08140103802213780ad1f5935d599026
[    77.440] (II) intel(0):    1d505400000001010101010101010101
[    77.440] (II) intel(0):    010101010101121b5664500014301022
[    77.440] (II) intel(0):    260058c110000018000000fe004e3135
[    77.440] (II) intel(0):    3642332d4c30420a2020000000fe0043
[    77.440] (II) intel(0):    4d4f0a202020202020202020000000fe
[    77.440] (II) intel(0):    004e31353642332d4c30420a20200076
[    77.440] (II) intel(0): EDID vendor "CMO", prod id 5523
[    77.440] (II) intel(0): Printing DDC gathered Modelines:
[    77.440] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1382 1416 1466  768 770 776 788 -hsync -vsync (47.3 kHz)
[    77.440] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    77.440] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    77.440] (II) intel(0): Printing probed modes for output LVDS1
[    77.440] (II) intel(0): Modeline "1366x768"x60.0   69.30  1366 1382 1416 1466  768 770 776 788 -hsync -vsync (47.3 kHz)
[    77.440] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    77.440] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[    77.440] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    77.440] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    77.440] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    77.440] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    77.464] (II) intel(0): EDID for output VGA1
[    77.472] (II) intel(0): EDID for output HDMI1
[    77.472] (II) intel(0): EDID for output DP1
[    77.472] (II) intel(0): EDID for output DP2
[    77.472] (II) intel(0): Output LVDS1 connected
[    77.472] (II) intel(0): Output VGA1 disconnected
[    77.472] (II) intel(0): Output HDMI1 disconnected
[    77.472] (II) intel(0): Output DP1 disconnected
[    77.472] (II) intel(0): Output DP2 disconnected
[    77.472] (II) intel(0): Using exact sizes for initial modes
[    77.472] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    77.472] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    77.472] (II) intel(0): Kernel page flipping support detected, enabling
[    77.472] (**) intel(0): Display dimensions: (340, 190) mm
[    77.472] (**) intel(0): DPI set to (102, 102)
[    77.472] (II) Loading sub module "fb"
[    77.472] (II) LoadModule: "fb"
[    77.472] (II) Loading /usr/lib/xorg/modules/libfb.so
[    77.491] (II) Module fb: vendor="X.Org Foundation"
[    77.491]    compiled for 1.11.3, module version = 1.0.0
[    77.491]    ABI class: X.Org ANSI C Emulation, version 0.4
[    77.491] (II) Loading sub module "dri2"
[    77.491] (II) LoadModule: "dri2"
[    77.491] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    77.491] (II) Module dri2: vendor="X.Org Foundation"
[    77.491]    compiled for 1.11.3, module version = 1.2.0
[    77.491]    ABI class: X.Org Server Extension, version 6.0
[    77.491] (II) UnloadModule: "vesa"
[    77.491] (II) Unloading vesa
[    77.491] (II) UnloadModule: "fbdev"
[    77.491] (II) Unloading fbdev
[    77.491] (II) UnloadModule: "fbdevhw"
[    77.491] (II) Unloading fbdevhw
[    77.491] (==) Depth 24 pixmap format is 32 bpp
[    77.491] (II) intel(0): [DRI2] Setup complete
[    77.491] (II) intel(0): [DRI2]   DRI driver: i965
[    77.491] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    77.506] (II) UXA(0): Driver registered support for the following operations:
[    77.506] (II)         solid
[    77.506] (II)         copy
[    77.506] (II)         composite (RENDER acceleration)
[    77.506] (II)         put_image
[    77.506] (II)         get_image
[    77.506] (==) intel(0): Backing store disabled
[    77.506] (==) intel(0): Silken mouse enabled
[    77.506] (II) intel(0): Initializing HW Cursor
[    77.532] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    77.535] (==) intel(0): DPMS enabled
[    77.536] (==) intel(0): Intel XvMC decoder enabled
[    77.536] (II) intel(0): Set up textured video
[    77.536] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    77.536] (II) intel(0): direct rendering: DRI2 Enabled
[    77.536] (==) intel(0): hotplug detection: "enabled"
[    77.536] (--) RandR disabled
[    77.536] (II) Initializing built-in extension Generic Event Extension
[    77.536] (II) Initializing built-in extension SHAPE
[    77.536] (II) Initializing built-in extension MIT-SHM
[    77.536] (II) Initializing built-in extension XInputExtension
[    77.536] (II) Initializing built-in extension XTEST
[    77.536] (II) Initializing built-in extension BIG-REQUESTS
[    77.536] (II) Initializing built-in extension SYNC
[    77.536] (II) Initializing built-in extension XKEYBOARD
[    77.536] (II) Initializing built-in extension XC-MISC
[    77.536] (II) Initializing built-in extension SECURITY
[    77.536] (II) Initializing built-in extension XINERAMA
[    77.536] (II) Initializing built-in extension XFIXES
[    77.536] (II) Initializing built-in extension RENDER
[    77.536] (II) Initializing built-in extension RANDR
[    77.536] (II) Initializing built-in extension COMPOSITE
[    77.536] (II) Initializing built-in extension DAMAGE
[    77.550] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    77.556] (II) intel(0): Setting screen physical size to 361 x 203
[    77.689] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    77.700] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    77.700] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    77.700] (II) LoadModule: "evdev"
[    77.700] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    77.721] (II) Module evdev: vendor="X.Org Foundation"
[    77.721]    compiled for 1.11.3, module version = 2.7.0
[    77.721]    Module class: X.Org XInput Driver
[    77.721]    ABI class: X.Org XInput driver, version 16.0
[    77.721] (II) Using input driver 'evdev' for 'Power Button'
[    77.721] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    77.721] (**) Power Button: always reports core events
[    77.721] (**) evdev: Power Button: Device: "/dev/input/event2"
[    77.721] (--) evdev: Power Button: Vendor 0 Product 0x1
[    77.721] (--) evdev: Power Button: Found keys
[    77.721] (II) evdev: Power Button: Configuring as keyboard
[    77.721] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    77.721] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    77.721] (**) Option "xkb_rules" "evdev"
[    77.721] (**) Option "xkb_model" "pc105"
[    77.721] (**) Option "xkb_layout" "us"
[    77.721] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    77.722] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    77.722] (II) Using input driver 'evdev' for 'Video Bus'
[    77.722] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    77.722] (**) Video Bus: always reports core events
[    77.722] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    77.722] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    77.722] (--) evdev: Video Bus: Found keys
[    77.722] (II) evdev: Video Bus: Configuring as keyboard
[    77.722] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event4"
[    77.722] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    77.722] (**) Option "xkb_rules" "evdev"
[    77.722] (**) Option "xkb_model" "pc105"
[    77.722] (**) Option "xkb_layout" "us"
[    77.722] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    77.722] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    77.722] (II) Using input driver 'evdev' for 'Power Button'
[    77.722] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    77.722] (**) Power Button: always reports core events
[    77.722] (**) evdev: Power Button: Device: "/dev/input/event0"
[    77.722] (--) evdev: Power Button: Vendor 0 Product 0x1
[    77.722] (--) evdev: Power Button: Found keys
[    77.722] (II) evdev: Power Button: Configuring as keyboard
[    77.722] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    77.722] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    77.722] (**) Option "xkb_rules" "evdev"
[    77.722] (**) Option "xkb_model" "pc105"
[    77.723] (**) Option "xkb_layout" "us"
[    77.723] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    77.723] (II) No input driver specified, ignoring this device.
[    77.723] (II) This device may have been added with another device file.
[    77.723] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[    77.723] (II) No input driver specified, ignoring this device.
[    77.723] (II) This device may have been added with another device file.
[    77.724] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[    77.724] (II) No input driver specified, ignoring this device.
[    77.724] (II) This device may have been added with another device file.
[    77.724] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    77.724] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    77.724] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    77.724] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    77.724] (**) AT Translated Set 2 keyboard: always reports core events
[    77.724] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    77.724] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    77.724] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    77.724] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    77.724] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    77.724] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    77.724] (**) Option "xkb_rules" "evdev"
[    77.724] (**) Option "xkb_model" "pc105"
[    77.724] (**) Option "xkb_layout" "us"
[    77.725] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    77.725] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    77.725] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    77.725] (II) LoadModule: "synaptics"
[    77.725] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    77.736] (II) Module synaptics: vendor="X.Org Foundation"
[    77.736]    compiled for 1.11.3, module version = 1.6.2
[    77.736]    Module class: X.Org XInput Driver
[    77.736]    ABI class: X.Org XInput driver, version 16.0
[    77.736] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    77.736] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    77.736] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    77.736] (**) Option "Device" "/dev/input/event8"
[    77.737] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    77.737] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    77.737] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4844
[    77.737] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    77.737] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    77.737] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    77.737] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    77.737] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    77.737] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    77.737] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event8"
[    77.737] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[    77.737] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    77.737] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    77.737] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    77.737] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    77.737] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    77.737] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    77.737] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    77.737] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    77.737] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    77.737] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    77.739] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[    77.739] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    77.740] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    77.740] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    77.740] (**) HP WMI hotkeys: always reports core events
[    77.740] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event5"
[    77.740] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    77.740] (--) evdev: HP WMI hotkeys: Found keys
[    77.740] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    77.740] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event5"
[    77.740] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 11)
[    77.740] (**) Option "xkb_rules" "evdev"
[    77.740] (**) Option "xkb_model" "pc105"
[    77.740] (**) Option "xkb_layout" "us"
[    79.541] (II) evdev: Power Button: Close
[    79.541] (II) UnloadModule: "evdev"
[    79.541] (II) Unloading evdev
[    79.541] (II) evdev: Video Bus: Close
[    79.541] (II) UnloadModule: "evdev"
[    79.541] (II) Unloading evdev
[    79.541] (II) evdev: Power Button: Close
[    79.541] (II) UnloadModule: "evdev"
[    79.541] (II) Unloading evdev
[    79.541] (II) evdev: AT Translated Set 2 keyboard: Close
[    79.541] (II) UnloadModule: "evdev"
[    79.541] (II) Unloading evdev
[    79.541] (II) UnloadModule: "synaptics"
[    79.541] (II) Unloading synaptics
[    79.541] (II) evdev: HP WMI hotkeys: Close
[    79.541] (II) UnloadModule: "evdev"
[    79.541] (II) Unloading evdev
[    80.214]  ddxSigGiveUp: Closing log
[    80.214] Server terminated successfully (0). Closing log file.


xrandr-verbose.txt
Κώδικας: Επιλογή όλων
Screen 0: minimum 1366 x 768, current 1366 x 768, maximum 1366 x 768
default connected 1366x768+0+0 (0x4a) normal (normal) 0mm x 0mm
   Identifier: 0x49
   Timestamp:  68641
   Subpixel:   unknown
   Clones:   
   CRTC:       0
   CRTCs:      0
   Transform:  1.000000 0.000000 0.000000
               0.000000 1.000000 0.000000
               0.000000 0.000000 1.000000
              filter:
  1366x768 (0x4a)    0.0MHz *current
        h: width  1366 start    0 end    0 total 1366 skew    0 clock    0.0KHz
        v: height  768 start    0 end    0 total  768           clock    0.0Hz
ACER ASPIRE 5920G-934G32Bn, Intel Core 2 Duo T9300 (2.5 GHz FSB, 6MB L2 Cache, 800 MHz FSB), 4GB (2x2 GB) DDR2, Nvidia, GEFORCE 9500M-GS 512MB, 15.4 WXGA CB,802.11N - http://www.motorcyclegloves.info
Alexandros
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 964
Εγγραφή: 08 Ιούλ 2008, 14:07
Εκτύπωση


  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Γραφικών / Εικόνα / TV

cron