Κάρτα τηλεόρασης Crypto - Mpeg 4

[earentil21]

Γενικά δεν είμαι τηλεορασάκιας για αυτό και δεν έχω ξεχωριστή TV αλλά μία κάρτα πάνω στο PC. Πως θα καταφέρω να περάσω την Crypto MPEG-4 στο ubuntu ? Παίζει και η ΑΕΚ σε καμια ωρίτσα...

[linuxman]

Για δοκίμασε να κάνεις εγκατάσταση το tvtime και δες εάν παίζει με αυτό .
Αν όχι δώσε αποτελέσματα από εντολές στο τερματικό
1.

Κώδικας: Επιλογή όλων

lspci -nn

2.

Κώδικας: Επιλογή όλων

lsusb

3.

Κώδικας: Επιλογή όλων

lsmod

Όλα μέσα στο

Κώδικας: Επιλογή όλων

[code]εδώ[/code]

να δούμε τι κάρτα είναι .
Επίσης εγκατάσταση σου είναι κανονική η την έκανες μέσα από τα παράθυρα ?

[earentil21]

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 0e)
00:01.0 PCI bridge [0604]: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port [8086:2581] (rev 0e)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV41 [GeForce 6800 GS] [10de:00c0] (rev a2)
02:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
02:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)


Ευχαριστώ για το χρόνο σου.. Κάπου διάβασα τι να κάνω για το tvtime σε ένα άλλο thread με κάποιον με παρόμοια κάρτα...

[logari81]

Κώδικας: Επιλογή όλων

02:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)

αυτην ειναι η καρτα σου. Αποτι ειδα με μια συντομη αναζητηση κανα δυο φορες που ασχοληθηκαμε με αυτην την καρτα δεν την καταφεραμε να δουλεψει. ΚΑταρχην εγκατεστησε τα προγραμματα tvtime και xawtv και δες αν δουλευει. Αν δεν δουλευει στειλε μας το αποτελεσμα των εντολών

Κώδικας: Επιλογή όλων

lsmod
dmesg

Παίζει και η ΑΕΚ σε καμια ωρίτσα...

και θελεις να προλαβεις να το δεις; Το αλλο με τον τοτο το ξερεις; :p

[earentil21]

Για κοίτα την ώρα που το πόσταρα

[earentil21]

Κώδικας: Επιλογή όλων

Module Size Used by
af_packet 25728 2
binfmt_misc 16904 1
rfcomm 44432 0
bridge 56980 0
stp 10628 1 bridge
bnep 20480 2
sco 18308 2
l2cap 30464 6 rfcomm,bnep
bluetooth 61924 6 rfcomm,bnep,sco,l2cap
ipv6 263972 18
vboxdrv 71576 0
ppdev 15620 0
acpi_cpufreq 15500 0
cpufreq_userspace 11396 0
cpufreq_powersave 9856 0
cpufreq_conservative 14600 0
cpufreq_ondemand 14988 2
cpufreq_stats 13188 0
freq_table 12672 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
pci_slot 12680 0
wmi 14504 0
sbs 19464 0
sbshc 13440 1 sbs
container 11520 0
video 25232 0
output 11008 1 video
battery 18436 0
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
ac 12292 0
lp 17156 0
loop 23180 0
snd_intel8x0 37532 3
snd_ac97_codec 111652 1 snd_intel8x0
ac97_bus 9856 1 snd_ac97_codec
snd_seq_dummy 10884 0
snd_seq_oss 38528 0
saa7134_alsa 20000 0
snd_pcm_oss 46848 0
snd_mixer_oss 22784 1 snd_pcm_oss
snd_seq_midi 14336 0
evdev 17696 6
snd_rawmidi 29824 1 snd_seq_midi
snd_pcm 83204 4 snd_intel8x0,snd_ac97_codec,saa7134_alsa,snd_pcm_oss
nvidia 6909268 40
parport_pc 39204 1
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
parport 42604 3 ppdev,lp,parport_pc
saa7134 147796 1 saa7134_alsa
ir_common 48900 1 saa7134
snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
videodev 41344 1 saa7134
v4l1_compat 22404 1 videodev
compat_ioctl32 9344 1 saa7134
v4l2_common 19840 1 saa7134
videobuf_dma_sg 20612 2 saa7134_alsa,saa7134
videobuf_core 26628 2 saa7134,videobuf_dma_sg
tveeprom 20228 1 saa7134
i2c_core 31892 4 nvidia,saa7134,v4l2_common,tveeprom
snd_timer 29960 2 snd_pcm,snd_seq
snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 63268 17 snd_intel8x0,snd_ac97_codec,snd_seq_oss,saa7134_alsa,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 15328 1 snd
pcspkr 10624 0
button 14224 0
snd_page_alloc 16136 2 snd_intel8x0,snd_pcm
iTCO_wdt 18596 0
iTCO_vendor_support 11652 1 iTCO_wdt
shpchp 38036 0
pci_hotplug 34976 1 shpchp
intel_agp 33724 0
agpgart 42184 2 nvidia,intel_agp
ext3 133256 3
jbd 55828 1 ext3
mbcache 16004 1 ext3
sr_mod 22212 1
cdrom 43168 1 sr_mod
sd_mod 42392 8
crc_t10dif 9984 1 sd_mod
sg 39732 2
ata_generic 12932 0
pata_acpi 12160 0
8139cp 27520 0
usbhid 35840 0
hid 50560 1 usbhid
ata_piix 24580 9
8139too 31616 0
mii 13440 2 8139cp,8139too
libata 178208 3 ata_generic,pata_acpi,ata_piix
scsi_mod 155212 4 sr_mod,sd_mod,sg,libata
dock 16656 1 libata
ehci_hcd 43788 0
uhci_hcd 30736 0
usbcore 149360 4 usbhid,ehci_hcd,uhci_hcd
thermal 23708 0
processor 42156 2 acpi_cpufreq,thermal
fan 12548 0
fuse 60828 5
vesafb 13828 1
fbcon 47648 72
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit


Κώδικας: Επιλογή όλων

IO/TCO
[ 0.480265] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.480286] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.480293] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.480300] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.480307] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.480315] PCI: 0000:00:1f.1 reg 20 io port: [f000, f00f]
[ 0.480358] PCI: 0000:00:1f.2 reg 10 io port: [d000, d007]
[ 0.480365] PCI: 0000:00:1f.2 reg 14 io port: [d400, d403]
[ 0.480371] PCI: 0000:00:1f.2 reg 18 io port: [d800, d807]
[ 0.480378] PCI: 0000:00:1f.2 reg 1c io port: [dc00, dc03]
[ 0.480385] PCI: 0000:00:1f.2 reg 20 io port: [e000, e00f]
[ 0.480409] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.480413] pci 0000:00:1f.2: PME# disabled
[ 0.480458] PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
[ 0.480514] PCI: 0000:01:00.0 reg 10 32bit mmio: [f0000000, f0ffffff]
[ 0.480526] PCI: 0000:01:00.0 reg 14 64bit mmio: [e0000000, efffffff]
[ 0.480537] PCI: 0000:01:00.0 reg 1c 64bit mmio: [f1000000, f1ffffff]
[ 0.480547] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.480601] PCI: bridge 0000:00:01.0 32bit mmio: [f0000000, f2ffffff]
[ 0.480605] PCI: bridge 0000:00:01.0 32bit mmio pref: [e0000000, efffffff]
[ 0.480649] PCI: 0000:02:01.0 reg 10 32bit mmio: [f3000000, f30003ff]
[ 0.480699] pci 0000:02:01.0: supports D1
[ 0.480701] pci 0000:02:01.0: supports D2
[ 0.480734] PCI: 0000:02:02.0 reg 10 io port: [a000, a0ff]
[ 0.480742] PCI: 0000:02:02.0 reg 14 32bit mmio: [f3001000, f30010ff]
[ 0.480786] pci 0000:02:02.0: supports D1
[ 0.480788] pci 0000:02:02.0: supports D2
[ 0.480790] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.480795] pci 0000:02:02.0: PME# disabled
[ 0.480838] pci 0000:00:1e.0: transparent bridge
[ 0.480843] PCI: bridge 0000:00:1e.0 io port: [a000, afff]
[ 0.480847] PCI: bridge 0000:00:1e.0 32bit mmio: [f3000000, f30fffff]
[ 0.480863] bus 00 -> node 0
[ 0.480872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.481139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.492179] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.492334] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.492482] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.492630] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.492778] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.492927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.493077] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.493226] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.493305] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.493305] pnp: PnP ACPI init
[ 0.493305] ACPI: bus type pnp registered
[ 0.496762] pnp: PnP ACPI: found 14 devices
[ 0.496762] ACPI: ACPI bus type pnp unregistered
[ 0.496762] PnPBIOS: Disabled by ACPI PNP
[ 0.496762] PCI: Using ACPI for IRQ routing
[ 0.500050] NET: Registered protocol family 8
[ 0.500054] NET: Registered protocol family 20
[ 0.500081] NetLabel: Initializing
[ 0.500081] NetLabel: domain hash size = 128
[ 0.500081] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.500089] NetLabel: unlabeled traffic allowed by default
[ 0.500165] hpet clockevent registered
[ 0.500171] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.500177] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.501838] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.501840] actual entries 65620
[ 0.501946] AppArmor: AppArmor Filesystem Enabled
[ 0.501968] ACPI: RTC can wake from S4
[ 0.504661] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.504665] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.504669] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.504673] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.504692] system 00:0b: ioport range 0x400-0x4bf could not be reserved
[ 0.504701] system 00:0c: iomem range 0xd0000000-0xdfffffff could not be reserved
[ 0.504710] system 00:0d: iomem range 0xd0000-0xd7fff has been reserved
[ 0.504719] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.504722] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.504726] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.504729] system 00:0d: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.504733] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.504736] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.504740] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.504743] system 00:0d: iomem range 0xfed13000-0xfed1dfff could not be reserved
[ 0.504747] system 00:0d: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 0.504750] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.504754] system 00:0d: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.504757] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.504761] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.540222] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.540225] pci 0000:00:01.0: IO window: disabled
[ 0.540231] pci 0000:00:01.0: MEM window: 0xf0000000-0xf2ffffff
[ 0.540235] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.540242] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.540246] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.540252] pci 0000:00:1e.0: MEM window: 0xf3000000-0xf30fffff
[ 0.540257] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.540273] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.540278] pci 0000:00:01.0: setting latency timer to 64
[ 0.540287] pci 0000:00:1e.0: setting latency timer to 64
[ 0.540291] bus: 00 index 0 io port: [0, ffff]
[ 0.540294] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.540296] bus: 01 index 0 mmio: [0, 0]
[ 0.540299] bus: 01 index 1 mmio: [f0000000, f2ffffff]
[ 0.540301] bus: 01 index 2 mmio: [e0000000, efffffff]
[ 0.540303] bus: 01 index 3 mmio: [0, 0]
[ 0.540306] bus: 02 index 0 io port: [a000, afff]
[ 0.540308] bus: 02 index 1 mmio: [f3000000, f30fffff]
[ 0.540310] bus: 02 index 2 mmio: [0, 0]
[ 0.540313] bus: 02 index 3 io port: [0, ffff]
[ 0.540315] bus: 02 index 4 mmio: [0, ffffffff]
[ 0.540325] NET: Registered protocol family 2
[ 0.552721] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.553054] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.553345] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.553516] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.553519] TCP reno registered
[ 0.556746] NET: Registered protocol family 1
[ 0.556884] checking if image is initramfs... it is
[ 1.000693] Switched to high resolution mode on CPU 1
[ 1.004093] Switched to high resolution mode on CPU 0
[ 1.181592] Freeing initrd memory: 8001k freed
[ 1.183185] audit: initializing netlink socket (disabled)
[ 1.183202] type=2000 audit(1235361743.181:1): initialized
[ 1.188202] highmem bounce pool size: 64 pages
[ 1.188212] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.191961] VFS: Disk quotas dquot_6.5.1
[ 1.192098] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.192249] msgmni has been set to 1743
[ 1.192412] io scheduler noop registered
[ 1.192415] io scheduler anticipatory registered
[ 1.192418] io scheduler deadline registered
[ 1.192432] io scheduler cfq registered (default)
[ 1.192546] pci 0000:01:00.0: Boot video device
[ 1.192690] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.192733] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.192769] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.192842] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.193361] isapnp: Scanning for PnP cards...
[ 1.545028] isapnp: No Plug & Play device found
[ 1.601331] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.601483] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.601665] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.602427] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.602782] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.605687] brd: module loaded
[ 1.605789] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.605975] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.605979] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.606605] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.612192] mice: PS/2 mouse device common for all mice
[ 1.612385] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.612410] rtc0: alarms up to one month, hpet irqs
[ 1.612619] EISA: Probing bus 0 at eisa.0
[ 1.612656] EISA: Detected 0 cards.
[ 1.612660] cpuidle: using governor ladder
[ 1.612663] cpuidle: using governor menu
[ 1.613351] TCP cubic registered
[ 1.613384] Using IPI No-Shortcut mode
[ 1.613676] registered taskstats version 1
[ 1.613797] Magic number: 13:86:10
[ 1.613869] rtc_cmos 00:03: setting system clock to 2009-02-23 04:02:24 UTC (1235361744)
[ 1.613873] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.613876] EDD information not available.
[ 1.614118] Freeing unused kernel memory: 424k freed
[ 1.614178] Write protecting the kernel text: 2580k
[ 1.614214] Write protecting the kernel read-only data: 940k
[ 1.640033] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.690209] vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 10240k, total 262144k
[ 1.690213] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 1.690216] vesafb: protected mode interface info at c000:d300
[ 1.690219] vesafb: pmi: set display start = c00cd336, set palette = c00cd3a0
[ 1.690222] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 1.690240] vesafb: scrolling: redraw
[ 1.690243] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.690549] Console: switching to colour frame buffer device 160x64
[ 1.743777] fb0: VESA VGA frame buffer device
[ 1.941662] fuse init (API version 7.9)
[ 1.965153] processor ACPI0007:00: registered as cooling_device0
[ 1.965162] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 1.965407] ACPI: SSDT 7FFF7080, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 1.965729] processor ACPI0007:01: registered as cooling_device1
[ 1.965736] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 2.218805] usbcore: registered new interface driver usbfs
[ 2.218850] usbcore: registered new interface driver hub
[ 2.218928] usbcore: registered new device driver usb
[ 2.234134] USB Universal Host Controller Interface driver v3.0
[ 2.234204] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.234221] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.234229] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.234307] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.234359] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[ 2.234627] usb usb1: configuration #1 chosen from 1 choice
[ 2.234688] hub 1-0:1.0: USB hub found
[ 2.234712] hub 1-0:1.0: 2 ports detected
[ 2.337355] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.337369] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.337375] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.337418] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.337462] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[ 2.337628] usb usb2: configuration #1 chosen from 1 choice
[ 2.337679] hub 2-0:1.0: USB hub found
[ 2.337691] hub 2-0:1.0: 2 ports detected
[ 2.441346] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.441360] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.441367] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.441411] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.441451] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[ 2.441602] usb usb3: configuration #1 chosen from 1 choice
[ 2.441652] hub 3-0:1.0: USB hub found
[ 2.441664] hub 3-0:1.0: 2 ports detected
[ 2.502307] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.543360] No dock devices found.
[ 2.545419] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.545434] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.545442] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.545489] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.545533] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[ 2.545712] usb usb4: configuration #1 chosen from 1 choice
[ 2.545768] hub 4-0:1.0: USB hub found
[ 2.545781] hub 4-0:1.0: 2 ports detected
[ 2.594434] SCSI subsystem initialized
[ 2.629677] libata version 3.00 loaded.
[ 2.638415] 8139too Fast Ethernet driver 0.9.28
[ 2.753609] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.753632] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.753641] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.753702] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.757627] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.757638] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3100000
[ 2.865107] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 2.877030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.877433] usb usb5: configuration #1 chosen from 1 choice
[ 2.877502] hub 5-0:1.0: USB hub found
[ 2.877520] hub 5-0:1.0: 8 ports detected
[ 2.933073] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 3.089715] ata_piix 0000:00:1f.1: version 2.12
[ 3.089739] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.089801] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.089888] scsi0 : ata_piix
[ 3.090075] scsi1 : ata_piix
[ 3.091638] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 3.091646] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 3.264354] ata1.00: HPA unlocked: 39100223 -> 39102336, native 39102336
[ 3.264362] ata1.00: ATA-5: WDC WD200BB-00DEA0, 05.03E05, max UDMA/100
[ 3.264366] ata1.00: 39102336 sectors, multi 16: LBA
[ 3.264384] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 3.281406] ata1.00: configured for UDMA/33
[ 3.380025] usb 4-1: new low speed USB device using uhci_hcd and address 3
[ 3.446952] scsi 0:0:0:0: Direct-Access ATA WDC WD200BB-00DE 05.0 PQ: 0 ANSI: 5
[ 3.447577] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.447586] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.447644] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.447725] scsi2 : ata_piix
[ 3.447839] scsi3 : ata_piix
[ 3.449819] ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 19
[ 3.449826] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 19
[ 3.564765] usb 4-1: configuration #1 chosen from 1 choice
[ 3.586856] usbcore: registered new interface driver hiddev
[ 3.599859] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input2
[ 3.600206] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.3-1
[ 3.600231] usbcore: registered new interface driver usbhid
[ 3.600236] usbhid: v2.6:USB HID core driver
[ 3.621344] ata3.00: ATA-7: ST3250410AS, 3.AAF, max UDMA/133
[ 3.621350] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.621510] ata3.01: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
[ 3.621515] ata3.01: 156250000 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.637374] ata3.00: configured for UDMA/133
[ 3.644363] ata3.01: configured for UDMA/133
[ 3.800150] ata4.01: NODEV after polling detection
[ 3.808230] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-H66N, CB00, max UDMA/100
[ 3.824252] ata4.00: configured for UDMA/100
[ 3.824403] scsi 2:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
[ 3.824583] scsi 2:0:1:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5
[ 3.827806] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H66N CB00 PQ: 0 ANSI: 5
[ 3.827948] 8139too 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.828959] eth0: RealTek RTL8139 at 0xa000, 00:1e:2a:b8:20:7d, IRQ 18
[ 3.828963] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 3.834314] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.860339] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.860414] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.860488] scsi 2:0:1:0: Attached scsi generic sg2 type 0
[ 3.860558] scsi 3:0:0:0: Attached scsi generic sg3 type 5
[ 3.891073] Driver 'sd' needs updating - please use bus_type methods
[ 3.891228] sd 0:0:0:0: [sda] 39102336 512-byte hardware sectors (20020 MB)
[ 3.891265] sd 0:0:0:0: [sda] Write Protect is off
[ 3.891271] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.891333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.891467] sd 0:0:0:0: [sda] 39102336 512-byte hardware sectors (20020 MB)
[ 3.891503] sd 0:0:0:0: [sda] Write Protect is off
[ 3.891508] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.891566] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.891573] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 3.916850] sda1
[ 3.916986] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.917099] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 3.917125] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.917129] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.917172] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.917251] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 3.917275] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.917278] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.917320] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.917325] sdb: sdb1
[ 3.920116] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.920217] sd 2:0:1:0: [sdc] 156250000 512-byte hardware sectors (80000 MB)
[ 3.920241] sd 2:0:1:0: [sdc] Write Protect is off
[ 3.920245] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.920287] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.920369] sd 2:0:1:0: [sdc] 156250000 512-byte hardware sectors (80000 MB)
[ 3.920393] sd 2:0:1:0: [sdc] Write Protect is off
[ 3.920396] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.920438] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.920444] sdc: sdc1 < sdc5 sdc6 sdc7 >
[ 4.002087] sd 2:0:1:0: [sdc] Attached SCSI disk
[ 4.021315] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.021323] Uniform CD-ROM driver Revision: 3.20
[ 4.021473] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 9.529122] usplash[1065]: segfault at b7393780 ip b7ef8bb6 sp bfc66a60 error 6 in libusplash.so.0[b7ed4000+28000]
[ 9.549573] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 9.549580] EXT3-fs: write access will be enabled during recovery.
[ 16.551420] kjournald starting. Commit interval 5 seconds
[ 16.551434] EXT3-fs: recovery complete.
[ 16.561445] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.204726] udevd version 124 started
[ 23.045258] Linux agpgart interface v0.103
[ 23.165238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 23.198059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.263986] iTCO_vendor_support: vendor-support=0
[ 23.321179] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 23.321923] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
[ 23.322084] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 23.423443] intel_rng: FWH not detected
[ 23.437486] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 23.451267] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 23.457072] ACPI: Power Button (FF) [PWRF]
[ 23.457183] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 23.485027] ACPI: Power Button (CM) [PWRB]
[ 24.248549] Linux video capture interface: v2.00
[ 24.369994] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 24.370058] saa7134 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 24.370070] saa7130[0]: found at 0000:02:01.0, rev: 1, irq: 19, latency: 32, mmio: 0xf3000000
[ 24.370081] saa7130[0]: subsystem: 1131:203e, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 24.370095] saa7130[0]: board init: gpio is 4131ff
[ 24.520052] saa7130[0]: i2c eeprom 00: 31 11 3e 20 08 20 1c 55 43 43 a9 1c 55 43 43 a9
[ 24.520078] saa7130[0]: i2c eeprom 10: ff ff 00 00 31 30 4d 4f 4f 4e 53 37 31 33 30 20
[ 24.520102] saa7130[0]: i2c eeprom 20: 41 3e 48 53 ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520125] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520149] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520172] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520195] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520218] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520241] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520265] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520288] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520312] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520335] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520358] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520382] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520405] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520604] saa7130[0]: registered device video0 [v4l2]
[ 24.520676] saa7130[0]: registered device vbi0
[ 24.521339] parport_pc 00:09: reported by Plug and Play ACPI
[ 24.521388] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 24.664360] nvidia: module license 'NVIDIA' taints kernel.
[ 24.991158] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.991170] nvidia 0000:01:00.0: setting latency timer to 64
[ 24.991398] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
[ 25.211972] saa7134 ALSA driver for DMA sound loaded
[ 25.212020] saa7130[0]/alsa: saa7130[0] at 0xf3000000 irq 19 registered as card -2
[ 26.061851] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 26.061881] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 26.385039] intel8x0_measure_ac97_clock: measured 54493 usecs
[ 26.385046] intel8x0: clocking to 48000
[ 27.077790] loop: module loaded
[ 27.096528] lp0: using parport0 (interrupt-driven).
[ 27.261471] Adding 4883720k swap on /dev/sdc6. Priority:-1 extents:1 across:4883720k
[ 27.499270] EXT3 FS on sdc5, internal journal
[ 28.851322] kjournald starting. Commit interval 5 seconds
[ 28.851593] EXT3 FS on sdc7, internal journal
[ 28.851601] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.178351] kjournald starting. Commit interval 5 seconds
[ 29.178807] EXT3 FS on sda1, internal journal
[ 29.178816] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.425734] type=1505 audit(1235354572.444:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4161
[ 29.600198] type=1505 audit(1235354572.620:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4166
[ 29.600388] type=1505 audit(1235354572.620:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4166
[ 29.681748] type=1505 audit(1235354572.701:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4170
[ 29.858398] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 30.541937] ACPI: WMI: Mapper loaded
[ 31.483028] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 36.156477] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 36.156484] apm: disabled - APM is not SMP safe.
[ 36.272736] ppdev: user-space parallel port driver
[ 37.883778] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 37.883793] vboxdrv: Successfully done.
[ 37.883798] vboxdrv: Found 2 processor cores.
[ 37.886989] vboxdrv: fAsync=0 offMin=0x438 offMax=0x3ae8
[ 37.887010] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 37.887016] vboxdrv: Successfully loaded version 2.0.4_OSE (interface 0x00090000).
[ 38.022666] NET: Registered protocol family 10
[ 38.025120] lo: Disabled Privacy Extensions
[ 39.594339] Bluetooth: Core ver 2.13
[ 39.594776] NET: Registered protocol family 31
[ 39.594785] Bluetooth: HCI device and connection manager initialized
[ 39.594792] Bluetooth: HCI socket layer initialized
[ 39.625750] Bluetooth: L2CAP ver 2.11
[ 39.625762] Bluetooth: L2CAP socket layer initialized
[ 39.646620] Bluetooth: SCO (Voice Link) ver 0.6
[ 39.646627] Bluetooth: SCO socket layer initialized
[ 39.668532] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.668540] Bluetooth: BNEP filters: protocol multicast
[ 39.713682] Bridge firewalling registered
[ 39.762348] Bluetooth: RFCOMM socket layer initialized
[ 39.763726] Bluetooth: RFCOMM TTY layer initialized
[ 39.763735] Bluetooth: RFCOMM ver 1.10
[ 43.900521] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 44.232089] NET: Registered protocol family 17
[ 54.780029] eth0: no IPv6 routers present
[ 148.432341] ppdev0: registered pardevice
[ 148.476245] ppdev0: unregistered pardevice
[ 148.496177] ppdev0: registered pardevice
[ 148.540313] ppdev0: unregistered pardevice
[ 148.544547] ppdev0: registered pardevice
[ 148.592027] ppdev0: unregistered pardevice
[ 161.149221] NVRM: Xid (0001:00): 1, Channel 00000000 Method 00000000 Data 1a000000
[39474.180525] cdrom: This disc doesn't have any tracks I recognize!
[39474.435456] end_request: I/O error, dev sr0, sector 0
[39474.435473] Buffer I/O error on device sr0, logical block 0
[39474.438381] end_request: I/O error, dev sr0, sector 0
[39474.438397] Buffer I/O error on device sr0, logical block 0
[40452.104275] cdrom: This disc doesn't have any tracks I recognize!
[40452.128987] end_request: I/O error, dev sr0, sector 0
[40452.129003] Buffer I/O error on device sr0, logical block 0
[40452.136061] end_request: I/O error, dev sr0, sector 0
[40452.136076] Buffer I/O error on device sr0, logical block 0


[logari81]

Κώδικας: Επιλογή όλων

[ 24.369994] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 24.370058] saa7134 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 24.370070] saa7130[0]: found at 0000:02:01.0, rev: 1, irq: 19, latency: 32, mmio: 0xf3000000
[ 24.370081] saa7130[0]: subsystem: 1131:203e, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 24.370095] saa7130[0]: board init: gpio is 4131ff
[ 24.520052] saa7130[0]: i2c eeprom 00: 31 11 3e 20 08 20 1c 55 43 43 a9 1c 55 43 43 a9
[ 24.520078] saa7130[0]: i2c eeprom 10: ff ff 00 00 31 30 4d 4f 4f 4e 53 37 31 33 30 20
[ 24.520102] saa7130[0]: i2c eeprom 20: 41 3e 48 53 ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520125] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520149] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520172] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520195] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520218] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520241] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520265] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520288] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520312] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520335] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520358] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520382] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520405] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 24.520604] saa7130[0]: registered device video0 [v4l2]
[ 24.520676] saa7130[0]: registered device vbi0


εδώ φαινεται να εχουν παει ολα καλα, με το tvtime ή το xawtv δεν παιζει;

Αν δεν παιζει δοκιμασε να τρεξεις

Κώδικας: Επιλογή όλων

gstreamer-properties

και να αλλαξεις στην καρτελα video το input μεταξυ v4l και v4l2 και να κανεις test.

[linuxman]

Από αυτά που βλέπω την έχει βρει κανονικά δοκίμασες το tvtime και δεν ?
Έχεις κάνει full update ?
Εγκατάσταση είναι κανονική ?
Έχεις ανοίξει όλα τα αποθετήρια λογισμικού στις πηγές λογισμικού ?
Πάτα και το Alt+F2 και γράψει εκεί gstreamer-properties στην 2 καρτέλα θα πρέπει να δεις την κάρτα σαν επιλογή .
Να συνδέσεις και την κεραία να δεις αν πιάνει κάτι .

[earentil21]

Το δοκίμασα και με τα 2 προγράμματα που μου είπατε και με κεραία αλλά τίποτα... Μαυρίλα.. Για ρίξτε καμία αλλα πρόταση..?

[linuxman]

Το δοκίμασα και με τα 2 προγράμματα που μου είπατε και με κεραία αλλά τίποτα... Μαυρίλα.. Για ρίξτε καμία αλλα πρόταση..?

Δες και αυτά

Έχεις κάνει full update ?
Εγκατάσταση είναι κανονική ?
Έχεις ανοίξει όλα τα αποθετήρια λογισμικού στις πηγές λογισμικού ?
Πάτα και το Alt+F2 και γράψει εκεί gstreamer-properties στην 2 καρτέλα θα πρέπει να δεις την κάρτα σαν επιλογή .

και κάνε μία περιγραφή .