Εγκατάσταση: κατέβασα το CD, έκοψα τον σκληρό μου σε 3 κομμάτια (windows,linux,swap)
και έκανα εγκατάσταση στο linux
Ο κώδικας που ζήτησες:
- Κώδικας: Επιλογή όλων
george@george-laptop:~$ lspci -nn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 CPU Host Bridge [1106:2259]
00:00.3 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:3259]
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:4259]
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:7259]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198]
00:06.0 Network controller [0280]: RaLink RT2500 802.11g Cardbus/mini-PCI [1814:0201] (rev 01)
00:0c.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01)
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82)
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 74)
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN400/PM800/PM880/PN800/PN880 [S3 UniChrome Pro] [1106:3118] (rev 02)
george@george-laptop:~$ xrandr --verbose
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1600 x 1200
default connected 1024x768+0+0 (0x77) normal (normal) 0mm x 0mm
Identifier: 0x72
Timestamp: 23667
Subpixel: no subpixels
Clones:
CRTC: 0
CRTCs: 0
Panning: 0x0+0+0
Tracking: 0x0+0+0
Border: 0/0/0/0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
1600x1200 (0x73) 0.0MHz
h: width 1600 start 0 end 0 total 1600 skew 0 clock 0.0KHz
v: height 1200 start 0 end 0 total 1200 clock 0.0Hz
1400x1050 (0x74) 88.2MHz
h: width 1400 start 0 end 0 total 1400 skew 0 clock 63.0KHz
v: height 1050 start 0 end 0 total 1050 clock 60.0Hz
1280x1024 (0x75) 99.6MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 77.8KHz
v: height 1024 start 0 end 0 total 1024 clock 76.0Hz
1280x768 (0x76) 0.0MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 0.0KHz
v: height 768 start 0 end 0 total 768 clock 0.0Hz
1024x768 (0x77) 59.8MHz *current
h: width 1024 start 0 end 0 total 1024 skew 0 clock 58.4KHz
v: height 768 start 0 end 0 total 768 clock 76.0Hz
800x600 (0x78) 35.0MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 43.8KHz
v: height 600 start 0 end 0 total 600 clock 73.0Hz
720x576 (0x79) 0.0MHz
h: width 720 start 0 end 0 total 720 skew 0 clock 0.0KHz
v: height 576 start 0 end 0 total 576 clock 0.0Hz
720x540 (0x7a) 0.0MHz
h: width 720 start 0 end 0 total 720 skew 0 clock 0.0KHz
v: height 540 start 0 end 0 total 540 clock 0.0Hz
720x480 (0x7b) 0.0MHz
h: width 720 start 0 end 0 total 720 skew 0 clock 0.0KHz
v: height 480 start 0 end 0 total 480 clock 0.0Hz
640x480 (0x7c) 22.4MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 35.0KHz
v: height 480 start 0 end 0 total 480 clock 73.0Hz
λόγω περιορισμένου χρόνου δεν διάβασα πολλά πράγματα από το site πριν δημοσιεύσω
σιγά σιγά θα μπω στο κλίμα βέβαια.
δεν κατάφερα ακόμα να βρω πως φτιάχνω την υπογραφή,
είμαι πολύ αρχάριος στον προγραμματισμό αλλά κάτι καταλαβαίνω
Ευχαριστώ για την γρήγορη απάντηση