Soundblaster AWE64 Gold ISA δεν έχει ηχο Lubuntu 12.04

[becoming_i]

Καλησπέρα

Όπως αναφέρει και ο τίτλος του topic δεν έχω ήχο με Soundblaster AWE64 Gold σε Lubuntu 12.04
Το Link του alsa-project

http://www.alsa-project.org/db/?f=a961e ... 92a07ed590


Οπως βλέπετε το module για την Soundblaster το φορτώνει αλλά παρόλα αυτά δεν βλέπει κάν την κάρτα
Το μόνο που δεν δοκίμασα είναι να κάνω blacklist τα modules sb16 που φορτώνονται

snd_sb16_dsp
snd_sb16_csp
snd_sb_common

Σημειωτέον η κάρτα ήχου είναι ISA και όχι PCI και για αυτόν τον λόγο άνοιξα το τοπικ

Το υπόλοιπο configuration του PC έιναι
Pentium 3 936Mhz
256MB RAM
40G HDD
Ati Radeon 9200

ΥΓ. Επίσης δοκίμασα τον οδηγό που δίνεται εδώ χωρίς όμως επιτυχία.

Ευχαριστώ εκ των προτέρων.-

[the_eye]

Το hardware (ISA) είναι πάρα πολύ παλιό, είσαι σίγουρος ότι δουλεύει ;

Δώσε και το αποτέλεσμα των

Κώδικας: Επιλογή όλων

lspci -nn
dmesg

[becoming_i]

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev 44)
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598]
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C596 ISA [Mobile South] [1106:0596] (rev 23)
00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10)
00:07.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 11)
00:07.3 Host bridge [0600]: VIA Technologies, Inc. VT82C596 Power Management [1106:3050] (rev 30)
00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
00:0a.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
00:0a.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
00:0a.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200] [1002:5961] (rev 01)
bill@Pentium3:~$ lspci -nn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev 44)
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598]
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C596 ISA [Mobile South] [1106:0596] (rev 23)
00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10)
00:07.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 11)
00:07.3 Host bridge [0600]: VIA Technologies, Inc. VT82C596 Power Management [1106:3050] (rev 30)
00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
00:0a.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
00:0a.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
00:0a.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200] [1002:5961] (rev 01)


Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-30-generic (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 (Ubuntu 3.2.0-30.48-generic 3.2.27)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: VIA Technologies, Inc. VT82C693ABX/Advance-9, BIOS 4.51 PG 07/27/2000
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 0F0000000 mask FFC000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000fc00000 page 2M
[ 0.000000] 000fc00000 - 000fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to fff0000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 0d87c000 - 0ec1d000
[ 0.000000] ACPI: RSDP 000f7430 00014 (v00 QDIGRP)
[ 0.000000] ACPI: RSDT 0fff3000 00028 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0fff30c0 01DBF (v01 QDIGRP AWRDACPI 00001000 MSFT 0100000A)
[ 0.000000] ACPI: FACS 0fff0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fff0000
[ 0.000000] low ram: 0 - 0fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000fff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] On node 0 totalpages: 65408
[ 0.000000] free_area_init_node: node 0, pgdat c1822ec0, node_mem_map cfdef200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60944 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @cfdde000 s31616 r0 d21632 u53248
[ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64896
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-30-generic root=UUID=15813532-cb3f-4054-a0f0-b4b53b0279bf ro splash quiet vt.handoff=7
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1048064 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 228156k/262080k available (5618k kernel code, 33476k reserved, 2762k data, 712k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.000000] .init : 0xc1830000 - 0xc18e2000 ( 712 kB)
[ 0.000000] .data : 0xc157cac4 - 0xc182f5c0 (2762 kB)
[ 0.000000] .text : 0xc1000000 - 0xc157cac4 (5618 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cf808000 soft=cf80a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 938.832 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 1877.66 BogoMIPS (lpj=3755328)
[ 0.004025] pid_max: default: 32768 minimum: 301
[ 0.004104] Security Framework initialized
[ 0.004186] AppArmor: AppArmor initialized
[ 0.004192] Yama: becoming mindful.
[ 0.008102] Mount-cache hash table entries: 512
[ 0.008596] Initializing cgroup subsys cpuacct
[ 0.008618] Initializing cgroup subsys memory
[ 0.008647] Initializing cgroup subsys devices
[ 0.008656] Initializing cgroup subsys freezer
[ 0.008663] Initializing cgroup subsys blkio
[ 0.008687] Initializing cgroup subsys perf_event
[ 0.008780] CPU serial number disabled.
[ 0.008794] mce: CPU supports 5 MCE banks
[ 0.008979] SMP alternatives: switching to UP code
[ 0.022836] Freeing SMP alternatives: 24k freed
[ 0.022931] ACPI: Core revision 20110623
[ 0.025663] ACPI: setting ELCR to 0200 (from 1e20)
[ 0.027226] ftrace: allocating 25901 entries in 51 pages
[ 0.036072] weird, boot CPU (#0) not listed by the BIOS.
[ 0.036090] SMP motherboard not detected.
[ 0.036099] Local APIC not detected. Using dummy APIC emulation.
[ 0.036104] SMP disabled
[ 0.036112] Performance Events:
[ 0.036122] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.036128] no hardware sampling interrupt available.
[ 0.036140] p6 PMU driver.
[ 0.036158] ... version: 0
[ 0.036163] ... bit width: 32
[ 0.036168] ... generic registers: 2
[ 0.036174] ... value mask: 00000000ffffffff
[ 0.036179] ... max period: 000000007fffffff
[ 0.036185] ... fixed-purpose events: 0
[ 0.036190] ... event mask: 0000000000000003
[ 0.037419] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[ 0.037777] Brought up 1 CPUs
[ 0.037792] Total of 1 processors activated (1877.66 BogoMIPS).
[ 0.038932] devtmpfs: initialized
[ 0.039405] EVM: security.selinux
[ 0.039412] EVM: security.SMACK64
[ 0.039417] EVM: security.capability
[ 0.039658] PM: Registering ACPI NVS region at fff0000 (12288 bytes)
[ 0.044648] print_constraints: dummy:
[ 0.044724] RTC time: 15:27:55, date: 09/08/12
[ 0.044901] NET: Registered protocol family 16
[ 0.045346] EISA bus registered
[ 0.045487] ACPI: bus type pci registered
[ 0.075433] PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
[ 0.075441] PCI: Using configuration type 1 for base access
[ 0.079763] bio: create slab <bio-0> at 0
[ 0.080215] ACPI: Added _OSI(Module Device)
[ 0.080225] ACPI: Added _OSI(Processor Device)
[ 0.080233] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.080240] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.081162] ACPI: EC: Look up EC in DSDT
[ 0.084172] ACPI: Interpreter enabled
[ 0.084202] ACPI: (supports S0 S1 S5)
[ 0.084254] ACPI: Using PIC for interrupt routing
[ 0.090350] ACPI: No dock devices found.
[ 0.090362] HEST: Table not found.
[ 0.090383] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.090616] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.091023] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.091033] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] (ignored)
[ 0.091043] pci_root PNP0A03:00: host bridge window [io 0x4100-0x4fff] (ignored)
[ 0.091051] pci_root PNP0A03:00: host bridge window [io 0x5010-0xffff] (ignored)
[ 0.091060] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xffffffff] (ignored)
[ 0.091104] pci 0000:00:00.0: [1106:0691] type 0 class 0x000600
[ 0.091131] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref]
[ 0.091219] pci 0000:00:01.0: [1106:8598] type 1 class 0x000604
[ 0.091271] pci 0000:00:01.0: supports D1
[ 0.091303] pci 0000:00:07.0: [1106:0596] type 0 class 0x000601
[ 0.091390] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101
[ 0.091438] pci 0000:00:07.1: reg 20: [io 0xd000-0xd00f]
[ 0.091506] pci 0000:00:07.2: [1106:3038] type 0 class 0x000c03
[ 0.091553] pci 0000:00:07.2: reg 20: [io 0xd400-0xd41f]
[ 0.091615] pci 0000:00:07.3: [1106:3050] type 0 class 0x000600
[ 0.091699] pci 0000:00:09.0: [10ec:8139] type 0 class 0x000200
[ 0.091720] pci 0000:00:09.0: reg 10: [io 0xd800-0xd8ff]
[ 0.091735] pci 0000:00:09.0: reg 14: [mem 0xf6000000-0xf60000ff]
[ 0.091799] pci 0000:00:09.0: supports D1 D2
[ 0.091806] pci 0000:00:09.0: PME# supported from D1 D2 D3hot
[ 0.091818] pci 0000:00:09.0: PME# disabled
[ 0.091847] pci 0000:00:0a.0: [1106:3038] type 0 class 0x000c03
[ 0.091895] pci 0000:00:0a.0: reg 20: [io 0xdc00-0xdc1f]
[ 0.091937] pci 0000:00:0a.0: supports D1 D2
[ 0.091944] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.091953] pci 0000:00:0a.0: PME# disabled
[ 0.092058] pci 0000:00:0a.1: [1106:3038] type 0 class 0x000c03
[ 0.092106] pci 0000:00:0a.1: reg 20: [io 0xe000-0xe01f]
[ 0.092149] pci 0000:00:0a.1: supports D1 D2
[ 0.092155] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot
[ 0.092164] pci 0000:00:0a.1: PME# disabled
[ 0.092192] pci 0000:00:0a.2: [1106:3104] type 0 class 0x000c03
[ 0.092214] pci 0000:00:0a.2: reg 10: [mem 0xf6001000-0xf60010ff]
[ 0.092283] pci 0000:00:0a.2: supports D1 D2
[ 0.092290] pci 0000:00:0a.2: PME# supported from D0 D1 D2 D3hot
[ 0.092299] pci 0000:00:0a.2: PME# disabled
[ 0.092386] pci 0000:01:00.0: [1002:5961] type 0 class 0x000300
[ 0.092410] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.092425] pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
[ 0.092440] pci 0000:01:00.0: reg 18: [mem 0xf5000000-0xf500ffff]
[ 0.092474] pci 0000:01:00.0: reg 30: [mem 0xf4000000-0xf401ffff pref]
[ 0.092512] pci 0000:01:00.0: supports D1 D2
[ 0.092560] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.092571] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.092580] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.092591] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref]
[ 0.092607] pci_bus 0000:00: on NUMA node 0
[ 0.092625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.093133] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.096242] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.096665] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[ 0.097069] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 0.097488] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.098112] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.098121] vgaarb: loaded
[ 0.098127] vgaarb: bridge control possible 0000:01:00.0
[ 0.098573] i2c-core: driver [aat2870] using legacy suspend method
[ 0.098580] i2c-core: driver [aat2870] using legacy resume method
[ 0.098982] SCSI subsystem initialized
[ 0.099265] libata version 3.00 loaded.
[ 0.099477] usbcore: registered new interface driver usbfs
[ 0.099521] usbcore: registered new interface driver hub
[ 0.099642] usbcore: registered new device driver usb
[ 0.100046] PCI: Using ACPI for IRQ routing
[ 0.100062] PCI: pci_cache_line_size set to 32 bytes
[ 0.100162] reserve RAM buffer: 000000000fff0000 - 000000000fffffff
[ 0.100649] NetLabel: Initializing
[ 0.100657] NetLabel: domain hash size = 128
[ 0.100662] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.100708] NetLabel: unlabeled traffic allowed by default
[ 0.101004] Switching to clocksource pit
[ 0.136467] AppArmor: AppArmor Filesystem Enabled
[ 0.136668] pnp: PnP ACPI init
[ 0.136760] ACPI: bus type pnp registered
[ 0.137507] pnp 00:00: [mem 0x000a0000-0x000effff window]
[ 0.137518] pnp 00:00: [mem 0x000cd000-0x000cffff]
[ 0.137526] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[ 0.137533] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.137540] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.137548] pnp 00:00: [mem 0x0fff0000-0x0fffffff]
[ 0.137555] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.137562] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.137570] pnp 00:00: [mem 0x00100000-0x0ffeffff]
[ 0.137834] system 00:00: [mem 0x000a0000-0x000effff window] could not be reserved
[ 0.137846] system 00:00: [mem 0x000cd000-0x000cffff] has been reserved
[ 0.137855] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.137865] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.137874] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.137884] system 00:00: [mem 0x0fff0000-0x0fffffff] could not be reserved
[ 0.137893] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.137902] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.137912] system 00:00: [mem 0x00100000-0x0ffeffff] could not be reserved
[ 0.137927] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.138144] pnp 00:01: [bus 00-ff]
[ 0.138154] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.138162] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.138184] pnp 00:01: [io 0x0d00-0x3fff window]
[ 0.138192] pnp 00:01: [io 0x4000-0x407f]
[ 0.138199] pnp 00:01: [io 0x4080-0x40ff]
[ 0.138206] pnp 00:01: [io 0x4100-0x4fff window]
[ 0.138213] pnp 00:01: [io 0x5000-0x500f]
[ 0.138220] pnp 00:01: [io 0x5010-0xffff window]
[ 0.138227] pnp 00:01: [mem 0x10000000-0xffffffff window]
[ 0.138362] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.138696] pnp 00:02: [io 0x0010-0x001f]
[ 0.138705] pnp 00:02: [io 0x0022-0x003f]
[ 0.138712] pnp 00:02: [io 0x0044-0x005f]
[ 0.138718] pnp 00:02: [io 0x0062-0x0063]
[ 0.138725] pnp 00:02: [io 0x0065-0x006f]
[ 0.138732] pnp 00:02: [io 0x0074-0x007f]
[ 0.138738] pnp 00:02: [io 0x0091-0x0093]
[ 0.138745] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.138751] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.138758] pnp 00:02: [io 0x03f0-0x03f1]
[ 0.138765] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.138772] pnp 00:02: [io 0x0294-0x0297]
[ 0.139053] system 00:02: [io 0x03f0-0x03f1] has been reserved
[ 0.139063] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.139072] system 00:02: [io 0x0294-0x0297] has been reserved
[ 0.139083] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.139134] pnp 00:03: [dma 4]
[ 0.139142] pnp 00:03: [io 0x0000-0x000f]
[ 0.139149] pnp 00:03: [io 0x0080-0x0090]
[ 0.139156] pnp 00:03: [io 0x0094-0x009f]
[ 0.139162] pnp 00:03: [io 0x00c0-0x00df]
[ 0.139273] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.139312] pnp 00:04: [io 0x0070-0x0073]
[ 0.139328] pnp 00:04: [irq 8]
[ 0.139416] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.139448] pnp 00:05: [io 0x0061]
[ 0.139550] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.139583] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.139591] pnp 00:06: [irq 13]
[ 0.139678] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.140014] pnp 00:07: [io 0x03f2-0x03f5]
[ 0.140022] pnp 00:07: [io 0x03f7]
[ 0.140030] pnp 00:07: [irq 6]
[ 0.140037] pnp 00:07: [dma 2]
[ 0.140179] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.140590] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.140599] pnp 00:08: [irq 4]
[ 0.140766] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.141186] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.141194] pnp 00:09: [irq 3]
[ 0.141343] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.141844] pnp 00:0a: [io 0x0378-0x037f]
[ 0.141853] pnp 00:0a: [irq 7]
[ 0.142029] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.142439] pnp 00:0b: [io 0x0060]
[ 0.142446] pnp 00:0b: [io 0x0064]
[ 0.142454] pnp 00:0b: [irq 1]
[ 0.142547] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.142572] pnp: PnP ACPI: found 12 devices
[ 0.142578] ACPI: ACPI bus type pnp unregistered
[ 0.142593] PnPBIOS: Disabled by ACPI PNP
[ 0.184301] Switching to clocksource acpi_pm
[ 0.184409] PCI: max bus depth: 1 pci_try_num: 2
[ 0.184463] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.184476] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.184491] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.184502] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref]
[ 0.184536] pci 0000:00:01.0: setting latency timer to 64
[ 0.184550] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.184558] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.184567] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.184575] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.184583] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref]
[ 0.184795] NET: Registered protocol family 2
[ 0.185068] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.185775] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.186178] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.186570] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.186579] TCP reno registered
[ 0.186590] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.186641] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.187147] NET: Registered protocol family 1
[ 0.187234] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.187249] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.188410] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.188422] PCI: setting IRQ 10 as level-triggered
[ 0.188439] pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 0.188475] pci 0000:00:07.2: PCI INT D disabled
[ 0.189234] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
[ 0.189242] PCI: setting IRQ 12 as level-triggered
[ 0.189254] pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
[ 0.189276] pci 0000:00:0a.0: PCI INT A disabled
[ 0.189836] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 0.189843] PCI: setting IRQ 5 as level-triggered
[ 0.189855] pci 0000:00:0a.1: PCI INT B -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 0.189876] pci 0000:00:0a.1: PCI INT B disabled
[ 0.189898] pci 0000:00:0a.2: PCI INT C -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 0.189966] pci 0000:00:0a.2: PCI INT C disabled
[ 0.189982] pci 0000:01:00.0: Boot video device
[ 0.189991] PCI: CLS 32 bytes, default 32
[ 0.191507] audit: initializing netlink socket (disabled)
[ 0.191564] type=2000 audit(1347118075.184:1): initialized
[ 0.254816] Trying to unpack rootfs image as initramfs...
[ 0.326521] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.344742] VFS: Disk quotas dquot_6.5.2
[ 0.344985] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.347410] fuse init (API version 7.17)
[ 0.347810] msgmni has been set to 445
[ 0.364701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.365012] io scheduler noop registered
[ 0.365019] io scheduler deadline registered
[ 0.365059] io scheduler cfq registered (default)
[ 0.365585] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.365689] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.366228] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.366256] ACPI: Power Button [PWRB]
[ 0.366433] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.366444] ACPI: Power Button [PWRF]
[ 0.366631] Marking TSC unstable due to TSC halts in idle
[ 0.366655] ACPI: acpi_idle registered with cpuidle
[ 0.369133] ERST: Table is not found!
[ 0.369142] GHES: HEST is not enabled!
[ 0.369752] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.390473] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.390576] isapnp: Scanning for PnP cards...
[ 0.513100] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.582123] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.645712] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.646109] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.646121] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.646134] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.646274] pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0
[ 0.646283] pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0
[ 0.646291] pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1
[ 0.646299] pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1
[ 0.646416] 01:01: card 'Creative SB AWE64 Gold'
[ 0.646423] isapnp: 1 Plug & Play card detected total
[ 0.673287] Linux agpgart interface v0.103
[ 0.673578] agpgart: Detected VIA Apollo Pro 133 chipset
[ 0.677973] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[ 0.688852] brd: module loaded
[ 0.698433] loop: module loaded
[ 0.700879] Fixed MDIO Bus: probed
[ 0.700957] tun: Universal TUN/TAP device driver, 1.6
[ 0.700964] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.701259] PPP generic driver version 2.4.2
[ 0.701621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.701717] ehci_hcd 0000:00:0a.2: PCI INT C -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 0.701784] ehci_hcd 0000:00:0a.2: EHCI Host Controller
[ 0.701948] ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[ 0.702105] ehci_hcd 0000:00:0a.2: irq 10, io mem 0xf6001000
[ 0.712733] ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 1.00
[ 0.713540] hub 1-0:1.0: USB hub found
[ 0.713563] hub 1-0:1.0: 4 ports detected
[ 0.713845] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.713908] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.714055] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 0.714098] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 0.714329] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
[ 0.714415] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
[ 0.714951] hub 2-0:1.0: USB hub found
[ 0.714969] hub 2-0:1.0: 2 ports detected
[ 0.715221] uhci_hcd 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
[ 0.715249] uhci_hcd 0000:00:0a.0: UHCI Host Controller
[ 0.715449] uhci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3
[ 0.715514] uhci_hcd 0000:00:0a.0: irq 12, io base 0x0000dc00
[ 0.721235] hub 3-0:1.0: USB hub found
[ 0.721269] hub 3-0:1.0: 2 ports detected
[ 0.721547] uhci_hcd 0000:00:0a.1: PCI INT B -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 0.721589] uhci_hcd 0000:00:0a.1: UHCI Host Controller
[ 0.721930] uhci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 4
[ 0.722012] uhci_hcd 0000:00:0a.1: irq 5, io base 0x0000e000
[ 0.722645] hub 4-0:1.0: USB hub found
[ 0.722663] hub 4-0:1.0: 2 ports detected
[ 0.723113] usbcore: registered new interface driver libusual
[ 0.723291] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.723300] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.724290] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.724754] mousedev: PS/2 mouse device common for all mice
[ 0.725522] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.725570] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.725881] device-mapper: uevent: version 1.0.3
[ 0.726150] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.726276] EISA: Probing bus 0 at eisa.0
[ 0.726323] Cannot allocate resource for EISA slot 4
[ 0.726352] EISA: Detected 0 cards.
[ 0.726397] cpufreq-nforce2: No nForce2 chipset.
[ 0.726500] cpuidle: using governor ladder
[ 0.726629] cpuidle: using governor menu
[ 0.726636] EFI Variables Facility v0.08 2004-May-17
[ 0.727493] TCP cubic registered
[ 0.728005] NET: Registered protocol family 10
[ 0.740467] NET: Registered protocol family 17
[ 0.740545] Registering the dns_resolver key type
[ 0.740705] Using IPI No-Shortcut mode
[ 0.741305] PM: Hibernation image not present or could not be loaded.
[ 0.741384] registered taskstats version 1
[ 0.758325] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.024387] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 2.179194] Freeing initrd memory: 20100k freed
[ 2.310098] Magic number: 12:136:487
[ 2.310390] rtc_cmos 00:04: setting system clock to 2012-09-08 15:27:57 UTC (1347118077)
[ 2.310472] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.310479] EDD information not available.
[ 2.311023] Freeing unused kernel memory: 712k freed
[ 2.314541] Write protecting the kernel text: 5620k
[ 2.314677] Write protecting the kernel read-only data: 2324k
[ 2.419558] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.420600] zram: num_devices not specified. Using default: 1
[ 2.420608] zram: Creating 1 devices ...
[ 2.447270] udevd[87]: starting version 175
[ 3.023680] pata_via 0000:00:07.1: version 0.3.4
[ 3.060302] scsi0 : pata_via
[ 3.064278] scsi1 : pata_via
[ 3.064611] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 3.064623] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 3.191563] Floppy drive(s): fd0 is 1.44M
[ 3.228333] FDC 0 is a post-1991 82077
[ 3.228873] ata1.00: ATA-6: WDC WD400JB-00FMA0, 13.03G13, max UDMA/100
[ 3.228883] ata1.00: 78165360 sectors, multi 16: LBA
[ 3.231616] Adding 124492k swap on /dev/zram0. Priority:100 extents:1 across:124492k SS
[ 3.244690] ata1.00: configured for UDMA/66
[ 3.245249] scsi 0:0:0:0: Direct-Access ATA WDC WD400JB-00FM 13.0 PQ: 0 ANSI: 5
[ 3.246123] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.246739] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 3.246910] sd 0:0:0:0: [sda] Write Protect is off
[ 3.246921] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.246991] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.263602] [drm] Initialized drm 1.1.0 20060810
[ 3.285304] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.285386] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.293692] sda: sda1 sda2 < sda5 >
[ 3.295127] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.416518] ata2.00: ATAPI: CD-532E, 1.0A, max MWDMA2
[ 3.416544] ata2.01: ATAPI: _NEC DVD_RW ND-2500A, 1.07, max UDMA/33
[ 3.432546] ata2.00: configured for MWDMA2
[ 3.448574] ata2.01: configured for UDMA/33
[ 3.451008] scsi 1:0:0:0: CD-ROM TEAC CD-532E 1.0A PQ: 0 ANSI: 5
[ 3.453244] sr0: scsi3-mmc drive: 32x/32x xa/form2 cdda tray
[ 3.453264] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.453769] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.454226] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.457099] scsi 1:0:1:0: CD-ROM _NEC DVD_RW ND-2500A 1.07 PQ: 0 ANSI: 5
[ 3.458594] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 3.459130] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 3.459529] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 3.471379] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 3.472698] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 3.472711] PCI: setting IRQ 11 as level-triggered
[ 3.472729] 8139too 0000:00:09.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 3.474677] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xd800, 00:0e:2e:29:98:30, IRQ 11
[ 3.490691] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-2/2-2:1.0/input/input3
[ 3.491253] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:07.2-2/input0
[ 3.491351] usbcore: registered new interface driver usbhid
[ 3.491358] usbhid: USB HID core driver
[ 3.796214] [drm] radeon defaulting to kernel modesetting.
[ 3.796236] [drm] radeon kernel modesetting enabled.
[ 3.796496] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 3.804289] [drm] initializing kernel modesetting (RV280 0x1002:0x5961 0x148C:0x2069).
[ 3.804362] [drm] register mmio base: 0xF5000000
[ 3.804368] [drm] register mmio size: 65536
[ 3.805186] agpgart-via 0000:00:00.0: AGP 1.0 bridge
[ 3.806598] agpgart-via 0000:00:00.0: putting AGP V2 device into 2x mode
[ 3.806658] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
[ 3.806674] radeon 0000:01:00.0: GTT: 64M 0xF0000000 - 0xF3FFFFFF
[ 3.806687] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.806701] radeon 0000:01:00.0: VRAM: 256M 0x00000000E0000000 - 0x00000000EFFFFFFF (128M used)
[ 3.806798] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.806805] [drm] Driver supports precise vblank timestamp query.
[ 3.806862] [drm] radeon: irq initialized.
[ 3.812591] [drm] Detected VRAM RAM=256M, BAR=256M
[ 3.812604] [drm] RAM width 64bits DDR
[ 3.814870] [TTM] Zone kernel: Available graphics memory: 124496 kiB.
[ 3.814882] [TTM] Initializing pool allocator.
[ 3.815000] [drm] radeon: 128M of VRAM memory ready
[ 3.815009] [drm] radeon: 64M of GTT memory ready.
[ 3.817424] radeon 0000:01:00.0: WB disabled
[ 3.819995] [drm] Loading R200 Microcode
[ 3.837484] [drm] radeon: ring at 0x00000000F0001000
[ 3.837521] [drm] ring test succeeded in 0 usecs
[ 3.838019] [drm] radeon: ib pool ready.
[ 3.838278] [drm] ib test succeeded in 0 usecs
[ 3.838951] [drm] No TV DAC info found in BIOS
[ 3.839164] [drm] Radeon Display Connectors
[ 3.839170] [drm] Connector 0:
[ 3.839175] [drm] VGA
[ 3.839184] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 3.839190] [drm] Encoders:
[ 3.839195] [drm] CRT1: INTERNAL_DAC1
[ 3.839200] [drm] Connector 1:
[ 3.839204] [drm] DVI-I
[ 3.839209] [drm] HPD1
[ 3.839215] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 3.839221] [drm] Encoders:
[ 3.839225] [drm] CRT2: INTERNAL_DAC2
[ 3.839230] [drm] DFP1: INTERNAL_TMDS1
[ 3.839235] [drm] Connector 2:
[ 3.839239] [drm] S-video
[ 3.839243] [drm] Encoders:
[ 3.839248] [drm] TV1: INTERNAL_DAC2
[ 4.024699] [drm] fb mappable at 0xE0040000
[ 4.024809] [drm] vram apper at 0xE0000000
[ 4.024816] [drm] size 8294400
[ 4.024821] [drm] fb depth is 24
[ 4.024826] [drm] pitch is 7680
[ 4.030722] fbcon: radeondrmfb (fb0) is primary device
[ 4.032899] Console: switching to colour frame buffer device 240x67
[ 4.033188] fb0: radeondrmfb frame buffer device
[ 4.033195] drm: registered panic notifier
[ 4.033235] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 7.051000] Btrfs loaded
[ 7.089884] xor: automatically using best checksumming function: pIII_sse
[ 7.108036] pIII_sse : 1899.000 MB/sec
[ 7.108044] xor: using function: pIII_sse (1899.000 MB/sec)
[ 7.114033] device-mapper: dm-raid45: initialized v0.2594b
[ 7.263700] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.263723] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.263737] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.263769] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 00 20 00 00 02 00
[ 7.263795] end_request: I/O error, dev sr1, sector 128
[ 7.263808] Buffer I/O error on device sr1, logical block 32
[ 7.263819] Buffer I/O error on device sr1, logical block 33
[ 7.265519] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.265531] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.265542] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.265559] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 00 20 00 00 01 00
[ 7.265582] end_request: I/O error, dev sr1, sector 128
[ 7.265590] Buffer I/O error on device sr1, logical block 32
[ 7.268767] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.268782] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.268794] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.268815] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 00 21 00 00 01 00
[ 7.268839] end_request: I/O error, dev sr1, sector 132
[ 7.268850] Buffer I/O error on device sr1, logical block 33
[ 7.270363] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.270375] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.270387] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.270405] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 80 00 00 00 04 00
[ 7.270428] end_request: I/O error, dev sr1, sector 131072
[ 7.270436] Buffer I/O error on device sr1, logical block 32768
[ 7.270446] Buffer I/O error on device sr1, logical block 32769
[ 7.270458] Buffer I/O error on device sr1, logical block 32770
[ 7.270465] Buffer I/O error on device sr1, logical block 32771
[ 7.272194] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.272206] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.272218] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.272234] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 80 00 00 00 01 00
[ 7.272257] end_request: I/O error, dev sr1, sector 131072
[ 7.272265] Buffer I/O error on device sr1, logical block 32768
[ 7.273901] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.273912] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.273923] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.273937] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 80 01 00 00 01 00
[ 7.273960] end_request: I/O error, dev sr1, sector 131076
[ 7.273967] Buffer I/O error on device sr1, logical block 32769
[ 7.420077] end_request: I/O error, dev fd0, sector 0
[ 7.515311] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.907741] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.006389] udevd[398]: starting version 175
[ 21.027518] Adding 520188k swap on /dev/sda5. Priority:-1 extents:1 across:520188k
[ 21.568870] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.103922] sbawe 01:01.00: unable to assign resources
[ 22.103942] sbawe: AUDIO pnp configure failure
[ 22.222923] lp: driver loaded but no devices found
[ 22.457355] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.734256] parport_pc 00:0a: reported by Plug and Play ACPI
[ 22.734336] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 22.911334] lp0: using parport0 (interrupt-driven).
[ 23.175416] ppdev: user-space parallel port driver
[ 23.305610] Bluetooth: Core ver 2.16
[ 23.310095] NET: Registered protocol family 31
[ 23.310115] Bluetooth: HCI device and connection manager initialized
[ 23.310129] Bluetooth: HCI socket layer initialized
[ 23.310136] Bluetooth: L2CAP socket layer initialized
[ 23.310198] Bluetooth: SCO socket layer initialized
[ 23.392414] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.392436] Bluetooth: BNEP filters: protocol multicast
[ 23.458325] Bluetooth: RFCOMM TTY layer initialized
[ 23.458359] Bluetooth: RFCOMM socket layer initialized
[ 23.458366] Bluetooth: RFCOMM ver 1.11
[ 23.552816] type=1400 audit(1347118098.741:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=616 comm="apparmor_parser"
[ 23.562592] type=1400 audit(1347118098.749:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=616 comm="apparmor_parser"
[ 24.075014] type=1400 audit(1347118099.261:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=629 comm="apparmor_parser"
[ 24.086102] type=1400 audit(1347118099.273:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=629 comm="apparmor_parser"
[ 24.087031] type=1400 audit(1347118099.273:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=629 comm="apparmor_parser"
[ 24.147627] type=1400 audit(1347118099.333:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=631 comm="apparmor_parser"
[ 24.535907] device-mapper: multipath: version 1.3.0 loaded
[ 28.347665] init: failsafe main process (761) killed by TERM signal
[ 29.575390] type=1400 audit(1347118104.760:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=863 comm="apparmor_parser"
[ 29.647153] type=1400 audit(1347118104.832:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=864 comm="apparmor_parser"
[ 29.676931] type=1400 audit(1347118104.864:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser"
[ 29.677933] type=1400 audit(1347118104.864:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser"
[ 29.717237] 8139too 0000:00:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 30.093909] type=1400 audit(1347118105.280:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=866 comm="apparmor_parser"
[ 30.254031] type=1400 audit(1347118105.440:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=866 comm="apparmor_parser"
[ 30.323744] type=1400 audit(1347118105.508:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=866 comm="apparmor_parser"
[ 30.403384] type=1400 audit(1347118105.588:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=866 comm="apparmor_parser"
[ 30.480179] type=1400 audit(1347118105.664:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=866 comm="apparmor_parser"
[ 30.508955] type=1400 audit(1347118105.696:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=866 comm="apparmor_parser"
[ 32.823326] init: alsa-restore main process (980) terminated with status 19
[ 33.394161] init: lxdm main process (991) killed by TERM signal
[ 33.524938] init: gdm main process (1042) killed by TERM signal
[ 37.218407] init: plymouth-stop pre-start process (1272) terminated with status 1
[ 40.896142] eth0: no IPv6 routers present

Δεν ξέρω αν δουλεύει αλλά για να τα κατάφερανε στο ubuntuforums μάλλον κάτι θα γίνεται

[the_eye]

Δεν ξέρω αν δουλεύει αλλά για να τα κατάφερανε στο ubuntuforums μάλλον κάτι θα γίνεται

Δεν λέω ότι είναι ανέφικτο αλλά μήπως έχει χαλάσει η κάρτα.

Από το dmesg βλέπω αυτό το πρόβλημα

Κώδικας: Επιλογή όλων

[ 0.726323] Cannot allocate resource for EISA slot 4

που δείχνει πρόβλημα σε κάποια isa υποδοχή

και αυτό

Κώδικας: Επιλογή όλων

[ 22.103942] sbawe: AUDIO pnp configure failure

[simosx]

Κώδικας: Επιλογή όλων


!!Soundcards recognised by ALSA
!!-----------------------------

--- no soundcards ---


Δεν αναγνωρίστηκε κάρτα ήχου.
Δεν κατέχω από κάρτες ήχου ISA και δε μπορώ να βοηθήσω.
Θα μπορούσες να αγοράσεις μια κάρτα ήχου PCI ή ακόμα καλύτερα μια κάρτα ήχου USB. Κάπου 10€.

[becoming_i]

Εδώ είναι το κουλό !!!
Στα windows XP δουλεύει κανονικότατα!!!

Πραγματικά παράξενο.-

Ευχαριστώ για την προσπάθεια

ΥΓ. Παραπάνω αναφέρθηκα ότι δεν ξέρω αν δουλεύει στο linux.

[simosx]

Εδώ είναι το κουλό !!!
Στα windows XP δουλεύει κανονικότατα!!!

Πραγματικά παράξενο.-

Μπορείς να το προσπαθήσεις ακόμα για να δουλέψει σε Linux.
Βλέπω ότι σε μένα δεν υπάρχει snd-sbawe άρθρωμα πυρήνα, οπότε μπορεί να μη το βάζουν από προεπιλογή στο Ubuntu.
Στο http://www.alsa-project.org/main/index. ... dule-sbawe μπορείς να δεις όλες τις λεπτομέρειες.
Μπορεί να χρειαστεί να μεταγλωττίσεις ξανά την Alsa Με την επιλογή για snd-sbawe.

[becoming_i]

OK simosx θα το δοκιμάσω, ευχαριστώ