πρόβλημα με ήχο.

[mangelasakis]

Καλησπέρα παιδιά... Έχω κάνει εγκατάσταση debian testing lxde σε ένα λαπτοπ το οποιο προοριζετε μονο για χρηση ιντερνετ και skype αλλά δεν έχω ήχο.
Η κάρτα ήχου είναι αυτή:

Κώδικας: Επιλογή όλων

00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)

Κώδικας: Επιλογή όλων

00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
Subsystem: Packard Bell B.V. Device c011
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at c8000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel

Κώδικας: Επιλογή όλων

root@debian-Thanasis:/home/thanasis# uname -a
Linux debian-Thanasis 3.16.0-4-686-pae #1 SMP Debian 3.16.7-2 (2014-11-06) i686 GNU/Linux

Ανοίγοντας το alsamixer από τερματικό μου βγάζει μόνο το master το οποίο το έχω στο max αλλά τίποτα. Έψαξα και στο ιντερνετ για παρόμοια προβλήματα και αυτό που βρήκα είναι ότι σε παλιότερες εκδόσεις linux απλά εγκαθιστούν ξανά το alsa-driver πακέτο το οποίο όμως δεν μπορώ να το κάνω εγκατάσταση. Δεν ξέρω τι άλλο να κάνω για αυτό ζητάω την βοηθεια σας...

έτρεξα και αυτό το προγραμματάκι που βρήκα εδώ:
http://www.alsa-project.org/main/index.php/HDA_Analyzer

και τα αποτελέσματα είναι αυτά:

Κώδικας: Επιλογή όλων

root@debian-Thanasis:/home/thanasis# python run.py
Using temporary directory: /dev/shm/hda-analyzer
You may remove this directory when finished or if you like to
download the most recent copy of hda-analyzer tool.
File cached /dev/shm/hda-analyzer/hda_analyzer.py
File cached /dev/shm/hda-analyzer/hda_guilib.py
File cached /dev/shm/hda-analyzer/hda_codec.py
File cached /dev/shm/hda-analyzer/hda_proc.py
File cached /dev/shm/hda-analyzer/hda_graph.py
File cached /dev/shm/hda-analyzer/hda_mixer.py
Downloaded all files, executing hda_analyzer.py
No HDA codecs were found or insufficient priviledges for
/dev/snd/controlC* and /dev/snd/hwdepC*D* device files.

You may also check, if you compiled HDA driver with HWDEP
interface as well or close all application using HWDEP.

Try run this program as root user.
root@debian-Thanasis:/home/thanasis#


εχω δοκιμάσει και lubuntu 14.04 και 14.10 αλλά χωρίς αποτέλεσμα...

[the_eye]

Δώσε dmesg και viewtopic.php?f=9&t=7242

[mangelasakis]

http://www.alsa-project.org/db/?f=66abe533b97dd04ba2a780dc211ac32007f05497

Κώδικας: Επιλογή όλων

root@debian-Thanasis:/home/thanasis# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fe7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005fe80000-0x000000005fe94fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005fe95000-0x000000005fefffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005ff00000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: NEC Computers International EASYNOTE PB37R00942/K2W, BIOS NOTE BIOS Version Q3A05 09/30/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x5fe80 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 05FF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36200000-0x363fffff]
[ 0.000000] [mem 0x36200000-0x363fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x361fffff]
[ 0.000000] [mem 0x34000000-0x361fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x36400000-0x375fdfff]
[ 0.000000] [mem 0x36400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x01795000, 0x01795fff] PGTABLE
[ 0.000000] BRK [0x01796000, 0x01797fff] PGTABLE
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36518000-0x37283fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F7C20 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x5FE8F77C 00003C (v01 NEC ND000104 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACP 0x5FE94E88 000074 (v01 NEC ND000104 00000001 MSTF 0100000E)
[ 0.000000] ACPI: DSDT 0x5FE9005E 004E2A (v01 NEC ND000104 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x5FEA5FC0 000040
[ 0.000000] ACPI: BOOT 0x5FE94FD8 000028 (v01 NEC ND000104 00000001 MSFT 0100000E)
[ 0.000000] ACPI: MCFG 0x5FE94F9C 00003C (v01 INTEL ALVISO 00000001 LOHR 0000005F)
[ 0.000000] ACPI: SSDT 0x5FE8FBAF 0002D9 (v01 PmRef Cpu0Ist 00003000 INTL 20030224)
[ 0.000000] ACPI: SSDT 0x5FE8F9D1 0001DE (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
[ 0.000000] ACPI: SSDT 0x5FE8F7B8 000219 (v01 PmRef CpuPm 00003000 INTL 20030224)
[ 0.000000] 648MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x0179a000, 0x0179afff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x5fe7ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5fe7ffff]
[ 0.000000] On node 0 totalpages: 392734
[ 0.000000] free_area_init_node: node 0, pgdat c1656c40, node_mem_map f5918020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1298 pages used for memmap
[ 0.000000] HighMem zone: 166018 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75e7000 s35328 r0 d22016 u57344
[ 0.000000] pcpu-alloc: s35328 r0 d22016 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390962
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=fadc391c-8566-4e34-9b9c-8126e9e28d7b ro initrd=/install/gtk/initrd.gz quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0005fe80)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1536168K/1570936K available (4591K kernel code, 521K rwdata, 1444K rodata, 652K init, 460K bss, 34768K reserved, 664072K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc166b000 - 0xc170e000 ( 652 kB)
.data : 0xc147c07e - 0xc1669600 (1973 kB)
.text : 0xc1000000 - 0xc147c07e (4592 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.237 MHz processor
[ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.47 BogoMIPS (lpj=7980948)
[ 0.004019] pid_max: default: 32768 minimum: 301
[ 0.004035] ACPI: Core revision 20140424
[ 0.011010] ACPI: All ACPI Tables successfully acquired
[ 0.011020] ACPI: setting ELCR to 0200 (from 0800)
[ 0.011877] Security Framework initialized
[ 0.011895] AppArmor: AppArmor disabled by boot time parameter
[ 0.011897] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.011922] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.011925] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.012323] Initializing cgroup subsys memory
[ 0.012333] Initializing cgroup subsys devices
[ 0.012345] Initializing cgroup subsys freezer
[ 0.012351] Initializing cgroup subsys net_cls
[ 0.012360] Initializing cgroup subsys blkio
[ 0.012367] Initializing cgroup subsys perf_event
[ 0.012371] Initializing cgroup subsys net_prio
[ 0.012402] Disabled fast string operations
[ 0.012411] mce: CPU supports 5 MCE banks
[ 0.012429] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[ 0.019524] Freeing SMP alternatives memory: 20K (c170e000 - c1713000)
[ 0.021172] ftrace: allocating 20708 entries in 41 pages
[ 0.028107] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.028112] smpboot: SMP motherboard not detected
[ 0.028115] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.028116] smpboot: SMP disabled
[ 0.028150] Performance Events:
[ 0.028154] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.028156] no hardware sampling interrupt available.
[ 0.028158] p6 PMU driver.
[ 0.028161] ... version: 0
[ 0.028163] ... bit width: 32
[ 0.028164] ... generic registers: 2
[ 0.028166] ... value mask: 00000000ffffffff
[ 0.028168] ... max period: 000000007fffffff
[ 0.028170] ... fixed-purpose events: 0
[ 0.028171] ... event mask: 0000000000000003
[ 0.033660] x86: Booted up 1 node, 1 CPUs
[ 0.033665] smpboot: Total of 1 processors activated (3990.47 BogoMIPS)
[ 0.033732] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.033850] devtmpfs: initialized
[ 0.034198] PM: Registering ACPI NVS region [mem 0x5fe95000-0x5fefffff] (438272 bytes)
[ 0.035783] pinctrl core: initialized pinctrl subsystem
[ 0.035880] NET: Registered protocol family 16
[ 0.036081] cpuidle: using governor ladder
[ 0.036085] cpuidle: using governor menu
[ 0.036165] ACPI: bus type PCI registered
[ 0.036169] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.036275] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.036279] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.036281] PCI: Using MMCONFIG for extended config space
[ 0.036283] PCI: Using configuration type 1 for base access
[ 0.037697] ACPI: Added _OSI(Module Device)
[ 0.037700] ACPI: Added _OSI(Processor Device)
[ 0.037702] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.037704] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.040989] ACPI: Interpreter enabled
[ 0.041016] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.041022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.041039] ACPI: (supports S0 S3 S4 S5)
[ 0.041042] ACPI: Using PIC for interrupt routing
[ 0.041080] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.045083] ACPI: Power Resource [QFAN] (off)
[ 0.045891] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.045899] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.045906] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.046626] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.046630] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.046633] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.046636] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.046639] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.046642] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.046646] acpi PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[ 0.046649] PCI: root bus 00: using default resources
[ 0.046789] PCI host bridge to bus 0000:00
[ 0.046794] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.046797] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.046800] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.046812] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.046926] pci 0000:00:01.0: [8086:2591] type 01 class 0x060400
[ 0.046972] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.047107] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
[ 0.047132] pci 0000:00:1b.0: reg 0x10: [mem 0xc8000000-0xc8003fff 64bit]
[ 0.047237] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.047282] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.047352] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.047405] pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
[ 0.047510] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.047562] pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
[ 0.047667] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.047720] pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
[ 0.047824] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.047876] pci 0000:00:1d.3: reg 0x20: [io 0x1860-0x187f]
[ 0.048005] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.048029] pci 0000:00:1d.7: reg 0x10: [mem 0xc8004000-0xc80043ff]
[ 0.048130] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.048231] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.048384] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.048488] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.048498] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
[ 0.048505] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.048510] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
[ 0.048515] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
[ 0.048611] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.048632] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.048643] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.048655] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.048667] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.048679] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf]
[ 0.048704] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.048706] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.048709] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.048712] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.048742] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.048841] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.048912] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff]
[ 0.049087] pci 0000:01:00.0: [1002:5653] type 00 class 0x030000
[ 0.049100] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.049109] pci 0000:01:00.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.049117] pci 0000:01:00.0: reg 0x18: [mem 0xc8100000-0xc810ffff]
[ 0.049141] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.049172] pci 0000:01:00.0: supports D1 D2
[ 0.049231] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.049240] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.049243] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.049247] pci 0000:00:01.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.049251] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.049334] pci 0000:06:00.0: [10ec:8139] type 00 class 0x020000
[ 0.049359] pci 0000:06:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.049374] pci 0000:06:00.0: reg 0x14: [mem 0xc8206000-0xc82060ff]
[ 0.049472] pci 0000:06:00.0: supports D1 D2
[ 0.049475] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.049501] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.049586] pci 0000:06:08.0: [8086:4220] type 00 class 0x028000
[ 0.049612] pci 0000:06:08.0: reg 0x10: [mem 0xc8207000-0xc8207fff]
[ 0.049723] pci 0000:06:08.0: PME# supported from D0 D3hot D3cold
[ 0.049810] pci 0000:06:09.0: [104c:8031] type 02 class 0x060700
[ 0.049836] pci 0000:06:09.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.049877] pci 0000:06:09.0: supports D1 D2
[ 0.049880] pci 0000:06:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.049970] pci 0000:06:09.2: [104c:8032] type 00 class 0x0c0010
[ 0.049995] pci 0000:06:09.2: reg 0x10: [mem 0xc8206800-0xc8206fff]
[ 0.050010] pci 0000:06:09.2: reg 0x14: [mem 0xc8200000-0xc8203fff]
[ 0.050114] pci 0000:06:09.2: supports D1 D2
[ 0.050116] pci 0000:06:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.050204] pci 0000:06:09.3: [104c:8033] type 00 class 0x018000
[ 0.050228] pci 0000:06:09.3: reg 0x10: [mem 0xc8204000-0xc8205fff]
[ 0.050337] pci 0000:06:09.3: supports D1 D2
[ 0.050340] pci 0000:06:09.3: PME# supported from D0 D1 D2 D3hot
[ 0.050427] pci 0000:06:09.4: [104c:8034] type 00 class 0x080500
[ 0.050453] pci 0000:06:09.4: reg 0x10: [mem 0xc8208400-0xc82084ff]
[ 0.050467] pci 0000:06:09.4: reg 0x14: [mem 0xc8208000-0xc82080ff]
[ 0.050481] pci 0000:06:09.4: reg 0x18: [mem 0xc8206400-0xc82064ff]
[ 0.050565] pci 0000:06:09.4: supports D1 D2
[ 0.050568] pci 0000:06:09.4: PME# supported from D0 D1 D2 D3hot
[ 0.050683] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.050689] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.050695] pci 0000:00:1e.0: bridge window [mem 0xc8200000-0xc82fffff]
[ 0.050703] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.050706] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.050711] pci 0000:06:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.050781] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06] (conflicts with (null) [bus 06])
[ 0.050787] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
[ 0.050791] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06] (conflicts with (null) [bus 06])
[ 0.050797] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06]
[ 0.050801] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 0a
[ 0.050815] pci_bus 0000:00: on NUMA node 0
[ 0.050910] ACPI: PCI Interrupt Link [LNKA] (IRQs 5) *11
[ 0.050986] ACPI: PCI Interrupt Link [LNKB] (IRQs 7) *0, disabled.
[ 0.051061] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *11
[ 0.051135] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ 0.051209] ACPI: PCI Interrupt Link [LNKE] (IRQs 5) *11
[ 0.051283] ACPI: PCI Interrupt Link [LNKF] (IRQs 7) *0, disabled.
[ 0.051357] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
[ 0.051432] ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
[ 0.052091] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.052240] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.052243] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.052245] vgaarb: loaded
[ 0.052247] vgaarb: bridge control possible 0000:01:00.0
[ 0.052324] PCI: Using ACPI for IRQ routing
[ 0.062073] PCI: pci_cache_line_size set to 64 bytes
[ 0.062137] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.062140] e820: reserve RAM buffer [mem 0x5fe80000-0x5fffffff]
[ 0.062499] hpet clockevent registered
[ 0.062504] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.062510] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.062515] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.064000] Switched to clocksource hpet
[ 0.069001] pnp: PnP ACPI init
[ 0.069035] ACPI: bus type PNP registered
[ 0.069174] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.069179] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.069183] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.069186] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.069190] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.069193] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.069199] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.069549] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.069554] system 00:01: [io 0x0680-0x06ff] has been reserved
[ 0.069557] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.069562] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.069566] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.069569] system 00:01: [io 0x1640-0x164f] has been reserved
[ 0.069573] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.069577] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.069640] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.069696] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.069743] pnp 00:04: Plug and Play ACPI device, IDs AUI0200 PNP0f13 (active)
[ 0.069816] pnp: PnP ACPI: found 5 devices
[ 0.069818] ACPI: bus type PNP unregistered
[ 0.069827] PnPBIOS: Disabled by ACPI PNP
[ 0.107073] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.107087] pci 0000:01:00.0: BAR 6: assigned [mem 0xc8120000-0xc813ffff pref]
[ 0.107091] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.107095] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.107100] pci 0000:00:01.0: bridge window [mem 0xc8100000-0xc81fffff]
[ 0.107104] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.107113] pci 0000:06:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.107116] pci 0000:06:09.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.107119] pci 0000:06:09.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.107122] pci 0000:06:09.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.107128] pci 0000:06:09.0: BAR 0: assigned [mem 0xcc000000-0xcc000fff]
[ 0.107137] pci 0000:06:09.0: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
[ 0.107142] pci 0000:06:09.0: BAR 16: assigned [mem 0xdc000000-0xdfffffff]
[ 0.107145] pci 0000:06:09.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.107149] pci 0000:06:09.0: BAR 14: assigned [io 0x3800-0x38ff]
[ 0.107152] pci 0000:06:09.0: CardBus bridge to [bus 07-0a]
[ 0.107155] pci 0000:06:09.0: bridge window [io 0x3400-0x34ff]
[ 0.107161] pci 0000:06:09.0: bridge window [io 0x3800-0x38ff]
[ 0.107168] pci 0000:06:09.0: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 0.107174] pci 0000:06:09.0: bridge window [mem 0xdc000000-0xdfffffff]
[ 0.107179] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.107183] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.107190] pci 0000:00:1e.0: bridge window [mem 0xc8200000-0xc82fffff]
[ 0.107202] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.107205] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.107208] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.107211] pci_bus 0000:01: resource 1 [mem 0xc8100000-0xc81fffff]
[ 0.107214] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref]
[ 0.107217] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.107220] pci_bus 0000:06: resource 1 [mem 0xc8200000-0xc82fffff]
[ 0.107223] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.107226] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.107229] pci_bus 0000:07: resource 0 [io 0x3400-0x34ff]
[ 0.107232] pci_bus 0000:07: resource 1 [io 0x3800-0x38ff]
[ 0.107235] pci_bus 0000:07: resource 2 [mem 0xd8000000-0xdbffffff pref]
[ 0.107238] pci_bus 0000:07: resource 3 [mem 0xdc000000-0xdfffffff]
[ 0.107277] NET: Registered protocol family 2
[ 0.107605] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.107634] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.107684] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.107724] TCP: reno registered
[ 0.107728] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.107743] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.107821] NET: Registered protocol family 1
[ 0.108196] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.108199] PCI: setting IRQ 11 as level-triggered
[ 0.108658] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.109108] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.109110] PCI: setting IRQ 10 as level-triggered
[ 0.109561] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 0.109563] PCI: setting IRQ 5 as level-triggered
[ 0.110248] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.110270] PCI: CLS 32 bytes, default 64
[ 0.110341] Unpacking initramfs...
[ 0.518741] Freeing initrd memory: 13744K (f6518000 - f7284000)
[ 0.518880] Simple Boot Flag at 0x35 set to 0x1
[ 0.518997] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 0.519100] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.519493] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.519537] audit: initializing netlink subsys (disabled)
[ 0.519566] audit: type=2000 audit(1416777060.516:1): initialized
[ 0.519991] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.520066] zbud: loaded
[ 0.520144] VFS: Disk quotas dquot_6.5.2
[ 0.520163] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.520245] msgmni has been set to 1730
[ 0.520653] alg: No test for stdrng (krng)
[ 0.520683] bounce: pool size: 64 pages
[ 0.520700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.520751] io scheduler noop registered
[ 0.520755] io scheduler deadline registered
[ 0.520799] io scheduler cfq registered (default)
[ 0.521161] pcieport 0000:00:01.0: irq 16 for MSI/MSI-X
[ 0.521278] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.521307] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.521384] intel_idle: does not run on family 6 model 13
[ 0.521435] GHES: HEST is not enabled!
[ 0.521461] isapnp: Scanning for PnP cards...
[ 0.875290] isapnp: No Plug & Play device found
[ 0.875394] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.876035] Linux agpgart interface v0.103
[ 0.876348] i8042: PNP: PS/2 Controller [PNP0303:KBCE,AUI0200:MSEE] at 0x60,0x64 irq 1,12
[ 0.878975] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.878984] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.879165] mousedev: PS/2 mouse device common for all mice
[ 0.879248] rtc_cmos 00:02: RTC can wake from S4
[ 0.879408] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.879436] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.879455] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.880236] TCP: cubic registered
[ 0.880254] NET: Registered protocol family 10
[ 0.880532] mip6: Mobile IPv6
[ 0.880537] NET: Registered protocol family 17
[ 0.880543] mpls_gso: MPLS GSO support
[ 0.880721] Using IPI No-Shortcut mode
[ 0.880863] registered taskstats version 1
[ 0.881268] rtc_cmos 00:02: setting system clock to 2014-11-23 21:11:01 UTC (1416777061)
[ 0.881354] PM: Hibernation image not present or could not be loaded.
[ 0.881709] Freeing unused kernel memory: 652K (c166b000 - c170e000)
[ 0.881754] Write protecting the kernel text: 4596k
[ 0.881796] Write protecting the kernel read-only data: 1448k
[ 0.881798] NX-protecting the kernel data: 3596k
[ 0.894203] systemd-udevd[53]: starting version 215
[ 0.894607] random: systemd-udevd urandom read with 3 bits of entropy available
[ 0.918035] ACPI: bus type USB registered
[ 0.918082] usbcore: registered new interface driver usbfs
[ 0.918099] usbcore: registered new interface driver hub
[ 0.918284] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.925149] usbcore: registered new device driver usb
[ 0.925842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.926223] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.926493] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.926502] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.926512] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.926541] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 0.926922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.926925] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.926928] usb usb1: Product: UHCI Host Controller
[ 0.926931] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.926933] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.927117] hub 1-0:1.0: USB hub found
[ 0.927255] hub 1-0:1.0: 2 ports detected
[ 0.929628] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.929640] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.929650] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.929675] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 0.929742] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.929746] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.929748] usb usb2: Product: UHCI Host Controller
[ 0.929751] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.929753] usb usb2: SerialNumber: 0000:00:1d.1
[ 0.930437] hub 2-0:1.0: USB hub found
[ 0.930759] hub 2-0:1.0: 2 ports detected
[ 0.931443] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.931451] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.931459] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.931484] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
[ 0.932589] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.932594] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.932596] usb usb3: Product: UHCI Host Controller
[ 0.932599] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.932602] usb usb3: SerialNumber: 0000:00:1d.2
[ 0.932756] hub 3-0:1.0: USB hub found
[ 0.932872] hub 3-0:1.0: 2 ports detected
[ 0.933759] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.933767] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.933775] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.933799] uhci_hcd 0000:00:1d.3: irq 5, io base 0x00001860
[ 0.935689] ACPI: Fan [FAN] (off)
[ 0.935800] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.935804] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.935807] usb usb4: Product: UHCI Host Controller
[ 0.935810] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 0.935812] usb usb4: SerialNumber: 0000:00:1d.3
[ 0.936275] hub 4-0:1.0: USB hub found
[ 0.936284] hub 4-0:1.0: 2 ports detected
[ 0.937957] ehci-pci: EHCI PCI platform driver
[ 0.938548] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.938556] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 0.938573] ehci-pci 0000:00:1d.7: debug port 1
[ 0.942486] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.943662] ehci-pci 0000:00:1d.7: irq 11, io mem 0xc8004000
[ 0.946175] SCSI subsystem initialized
[ 0.949536] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.949569] 8139cp 0000:06:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 0.949991] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 0.951027] 8139too 0000:06:00.0 eth0: RealTek RTL8139 at 0x00013000, 00:c0:9f:db:5b:34, IRQ 11
[ 0.952595] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.952697] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.952700] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952703] usb usb5: Product: EHCI Host Controller
[ 0.952706] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 0.952708] usb usb5: SerialNumber: 0000:00:1d.7
[ 0.952887] hub 5-0:1.0: USB hub found
[ 0.952897] hub 5-0:1.0: 8 ports detected
[ 0.957577] sdhci: Secure Digital Host Controller Interface driver
[ 0.957581] sdhci: Copyright(c) Pierre Ossman
[ 0.957899] sdhci-pci 0000:06:09.4: SDHCI controller found [104c:8034] (rev 0)
[ 0.958040] mmc0: no vqmmc regulator found
[ 0.958042] mmc0: no vmmc regulator found
[ 0.960277] libata version 3.00 loaded.
[ 0.963277] mmc0: SDHCI controller on PCI [0000:06:09.4] using PIO
[ 0.963300] mmc1: no vqmmc regulator found
[ 0.963302] mmc1: no vmmc regulator found
[ 0.967649] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.967652] ACPI: Thermal Zone [THRM] (92 C)
[ 0.970327] mmc1: SDHCI controller on PCI [0000:06:09.4] using PIO
[ 0.970345] mmc2: no vqmmc regulator found
[ 0.970346] mmc2: no vmmc regulator found
[ 0.975033] mmc2: SDHCI controller on PCI [0000:06:09.4] using PIO
[ 0.976127] hub 1-0:1.0: USB hub found
[ 0.976138] hub 1-0:1.0: 2 ports detected
[ 1.000099] hub 2-0:1.0: USB hub found
[ 1.000110] hub 2-0:1.0: 2 ports detected
[ 1.024087] hub 3-0:1.0: USB hub found
[ 1.024096] hub 3-0:1.0: 2 ports detected
[ 1.028071] firewire_ohci 0000:06:09.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.048089] hub 4-0:1.0: USB hub found
[ 1.048099] hub 4-0:1.0: 2 ports detected
[ 1.048515] ahci 0000:00:1f.2: version 3.0
[ 1.048724] ahci 0000:00:1f.2: controller is in combined mode, can't enable AHCI mode
[ 1.049439] ata_piix 0000:00:1f.2: version 2.13
[ 1.049624] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.052361] scsi0 : ata_piix
[ 1.052529] scsi1 : ata_piix
[ 1.052602] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 1.052605] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 1.208452] ata2.01: NODEV after polling detection
[ 1.216779] ata2.00: ATAPI: PHILIPS DVD+/-RW SDVD8431, LX48, max UDMA/33
[ 1.217643] ata1.00: ATA-7: ST9160821AS, 3.ALC, max UDMA/133
[ 1.217647] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.232440] ata2.00: configured for UDMA/33
[ 1.234300] ata1.00: configured for UDMA/133
[ 1.234448] scsi 0:0:0:0: Direct-Access ATA ST9160821AS C PQ: 0 ANSI: 5
[ 1.236729] scsi 1:0:0:0: CD-ROM PHILIPS DVD+-RW SDVD8431 LX48 PQ: 0 ANSI: 5
[ 1.250476] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.250538] sd 0:0:0:0: [sda] Write Protect is off
[ 1.250541] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.250567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.258228] sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
[ 1.258231] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.258382] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.259559] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.259771] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.320061] usb 5-3: new high-speed USB device number 3 using ehci-pci
[ 1.330738] sda: sda1 sda2 < sda5 >
[ 1.331256] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.520028] tsc: Refined TSC clocksource calibration: 1995.195 MHz
[ 1.528121] firewire_core 0000:06:09.2: created device fw0: GUID 00c09f000070220b, S400
[ 1.554470] usb 5-3: New USB device found, idVendor=045e, idProduct=074a
[ 1.554473] usb 5-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.554476] usb 5-3: Product: Microsoft LifeCam
[ 1.554479] usb 5-3: Manufacturer: Microsoft
[ 1.921042] PM: Starting manual resume from disk
[ 1.921050] PM: Hibernation image partition 8:5 present
[ 1.921052] PM: Looking for hibernation image.
[ 1.921232] PM: Image not found (code -22)
[ 1.921234] PM: Hibernation image not present or could not be loaded.
[ 2.009478] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.108039] usb 1-2: new low-speed USB device number 2 using uhci_hcd
[ 2.494069] usb 1-2: New USB device found, idVendor=045e, idProduct=0040
[ 2.494073] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.494076] usb 1-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.494079] usb 1-2: Manufacturer: Microsoft
[ 2.520059] Switched to clocksource tsc
[ 2.940038] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 3.122061] usb 3-2: New USB device found, idVendor=147a, idProduct=e020
[ 3.122065] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.122068] usb 3-2: Product: Formosa RC105 USB Remot
[ 3.122070] usb 3-2: Manufacturer: Formosa Industrial Computin
[ 3.376027] random: nonblocking pool is initialized
[ 5.976666] lp: driver loaded but no devices found
[ 6.014886] ppdev: user-space parallel port driver
[ 6.137557] fuse init (API version 7.23)
[ 6.275168] loop: module loaded
[ 6.554852] systemd-udevd[145]: starting version 215
[ 9.046384] tsc: Marking TSC unstable due to TSC halts in idle
[ 9.046404] ACPI: acpi_idle registered with cpuidle
[ 9.051744] Switched to clocksource hpet
[ 9.156834] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 9.164744] ACPI: Lid Switch [LID0]
[ 9.164845] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 9.164852] ACPI: Power Button [PWRB]
[ 9.164963] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.164967] ACPI: Power Button [PWRF]
[ 9.209754] ACPI: AC Adapter [ACAD] (on-line)
[ 9.335325] ACPI: Battery Slot [BAT1] (battery absent)
[ 9.415407] lib80211: common routines for IEEE802.11 drivers
[ 9.415415] lib80211_crypt: registered algorithm 'NULL'
[ 9.458982] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.598236] cfg80211: Calling CRDA to update world regulatory domain
[ 9.639980] libipw: 802.11 data/management/control stack, git-1.1.13
[ 9.639983] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 9.844333] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.937528] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 9.937536] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 9.937995] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 10.289280] ipw2200 0000:06:08.0: firmware: direct-loading firmware ipw2200-bss.fw
[ 10.356112] snd_hda_intel 0000:00:1b.0: irq 17 for MSI/MSI-X
[ 10.433743] intel_rng: FWH not detected
[ 10.434423] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.437794] [drm] Initialized drm 1.1.0 20060810
[ 10.438217] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 10.438667] yenta_cardbus 0000:06:09.0: CardBus bridge found [1631:c011]
[ 10.438690] yenta_cardbus 0000:06:09.0: Using CSCINT to route CSC interrupts to PCI
[ 10.438693] yenta_cardbus 0000:06:09.0: Routing CardBus interrupts to PCI
[ 10.438699] yenta_cardbus 0000:06:09.0: TI: mfunc 0x01621b22, devctl 0x64
[ 10.464749] media: Linux media interface: v0.10
[ 10.502065] Linux video capture interface: v2.00
[ 10.530034] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20140424/utaddress-258)
[ 10.530053] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.530059] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20140424/utaddress-258)
[ 10.530071] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.530075] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.594392] hid (null): usage index exceeded
[ 10.595698] hid (null): usage index exceeded
[ 10.598481] usbcore: registered new interface driver usbhid
[ 10.598487] usbhid: USB HID core driver
[ 10.668510] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x00d8, PCI irq 5
[ 10.668523] yenta_cardbus 0000:06:09.0: Socket status: 30000006
[ 10.668532] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 10.668550] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 10.668559] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[ 10.669928] excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff
[ 10.676341] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0xc8200000-0xc82fffff]
[ 10.676347] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc8200000-0xc82fffff:
[ 10.676352] excluding 0xc8200000-0xc820ffff
[ 10.771042] systemd-journald[131]: Received request to flush runtime journal from PID 1
[ 10.951206] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.963260] ACPI Warning: SystemIO range 0x000018e0-0x000018ff conflicts with OpRegion 0x000018e0-0x000018ef (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 10.963274] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.212806] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:045E:0040.0001/input/input6
[ 11.213544] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2/input0
[ 11.217988] hid-generic 0003:147A:E020.0002: usage index exceeded
[ 11.218039] hid-generic 0003:147A:E020.0002: item 0 2 2 2 parsing failed
[ 11.218101] hid-generic: probe of 0003:147A:E020.0002 failed with error -22
[ 11.286746] iTCO_vendor_support: vendor-support=0
[ 11.338667] [drm] radeon kernel modesetting enabled.
[ 11.339225] [drm] initializing kernel modesetting (RV410 0x1002:0x5653 0x1631:0xC011).
[ 11.339242] [drm] register mmio base: 0xC8100000
[ 11.339244] [drm] register mmio size: 65536
[ 11.339359] ATOM BIOS: Quanta/NECCI
[ 11.339383] [drm] Generation 2 PCI interface, using max accessible memory
[ 11.339390] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[ 11.339394] radeon 0000:01:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[ 11.341299] [drm] Detected VRAM RAM=128M, BAR=128M
[ 11.341304] [drm] RAM width 128bits DDR
[ 11.341382] [TTM] Zone kernel: Available graphics memory: 443256 kiB
[ 11.341384] [TTM] Zone highmem: Available graphics memory: 775292 kiB
[ 11.341386] [TTM] Initializing pool allocator
[ 11.341394] [TTM] Initializing DMA pool allocator
[ 11.341426] [drm] radeon: 128M of VRAM memory ready
[ 11.341429] [drm] radeon: 512M of GTT memory ready.
[ 11.341452] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 11.342455] [drm] radeon: power management initialized
[ 11.343766] [drm] PCIE GART of 512M enabled (table at 0x00000000D0040000).
[ 11.343775] [drm] radeon: 2 quad pipes, 1 z pipes initialized.
[ 11.345205] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.345259] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 11.345472] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.346559] radeon 0000:01:00.0: WB enabled
[ 11.346566] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xff657000
[ 11.346570] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.346571] [drm] Driver supports precise vblank timestamp query.
[ 11.346597] radeon 0000:01:00.0: irq 18 for MSI/MSI-X
[ 11.346610] radeon 0000:01:00.0: radeon: using MSI.
[ 11.346636] [drm] radeon: irq initialized.
[ 11.346650] [drm] Loading R400 Microcode
[ 11.346677] radeon 0000:01:00.0: firmware: failed to load radeon/R420_cp.bin (-2)
[ 11.346724] radeon 0000:01:00.0: Direct firmware load failed with error -2
[ 11.346726] radeon 0000:01:00.0: Falling back to user helper
[ 11.347384] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 11.347429] radeon 0000:01:00.0: failed initializing CP (-12).
[ 11.347470] radeon 0000:01:00.0: Disabling GPU acceleration
[ 11.347513] [drm] radeon: cp finalized
[ 11.350608] [drm] Radeon Display Connectors
[ 11.350612] [drm] Connector 0:
[ 11.350613] [drm] VGA-1
[ 11.350616] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 11.350618] [drm] Encoders:
[ 11.350619] [drm] CRT1: INTERNAL_DAC1
[ 11.350621] [drm] Connector 1:
[ 11.350622] [drm] LVDS-1
[ 11.350625] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 11.350626] [drm] Encoders:
[ 11.350628] [drm] LCD1: INTERNAL_LVDS
[ 11.350629] [drm] Connector 2:
[ 11.350631] [drm] SVIDEO-1
[ 11.350632] [drm] Encoders:
[ 11.350633] [drm] TV1: INTERNAL_DAC2
[ 11.350635] [drm] Connector 3:
[ 11.350636] [drm] DVI-I-1
[ 11.350638] [drm] HPD1
[ 11.350640] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 11.350642] [drm] Encoders:
[ 11.350643] [drm] DFP1: INTERNAL_TMDS1
[ 12.148038] snd_hda_intel 0000:00:1b.0: Codec #0 probe error; disabling it...
[ 12.327906] [drm] fb mappable at 0xD0040000
[ 12.327911] [drm] vram apper at 0xD0000000
[ 12.327913] [drm] size 4096000
[ 12.327914] [drm] fb depth is 24
[ 12.327916] [drm] pitch is 5120
[ 12.328403] fbcon: radeondrmfb (fb0) is primary device
[ 13.175001] snd_hda_intel 0000:00:1b.0: Codec #1 probe error; disabling it...
[ 13.608092] Console: switching to colour frame buffer device 160x50
[ 13.613378] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 13.613381] radeon 0000:01:00.0: registered panic notifier
[ 13.613391] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[ 13.659933] uvcvideo: Found UVC 1.00 device Microsoft LifeCam (045e:074a)
[ 13.664263] input: Microsoft LifeCam as /devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.0/input/input8
[ 13.665021] usbcore: registered new interface driver uvcvideo
[ 13.665027] USB Video Class driver (1.1.1)
[ 13.756709] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 13.757761] excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x370-0x377
[ 13.758545] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 13.758951] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 13.759349] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 13.759970] clean.
[ 13.761422] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 13.762113] clean.
[ 13.762165] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 13.762180] excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 13.762244] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 13.762284] clean.
[ 13.762321] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 13.762360] clean.
[ 13.762397] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 13.763106] clean.
[ 14.549921] Adding 3139580k swap on /dev/sda5. Priority:-1 extents:1 across:3139580k FS
[ 14.854450] cfg80211: World regulatory domain updated:
[ 14.854460] cfg80211: DFS Master region: unset
[ 14.854465] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 14.854473] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.854480] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.854487] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.854493] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.854500] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 14.854507] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 14.854514] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.854520] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 15.813936] RPC: Registered named UNIX socket transport module.
[ 15.813941] RPC: Registered udp transport module.
[ 15.813943] RPC: Registered tcp transport module.
[ 15.813945] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.855351] FS-Cache: Loaded
[ 15.888072] FS-Cache: Netfs 'nfs' registered for caching
[ 16.008123] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.212055] snd_hda_intel 0000:00:1b.0: no AFG or MFG node found
[ 23.236060] snd_hda_intel 0000:00:1b.0: no AFG or MFG node found
[ 23.236213] snd_hda_intel 0000:00:1b.0: no codecs initialized
[ 25.409786] 8139too 0000:06:00.0 eth0: link down
[ 25.411509] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.969703] lib80211_crypt: registered algorithm 'CCMP'
[ 28.115218] lib80211_crypt: registered algorithm 'TKIP'
root@debian-Thanasis:/home/thanasis#

[the_eye]

Έχεις εγκαταστήσει alsa ;
Στο dmesg βλέπω και ένα θέμα με την κάρτα γραφικών.

[mangelasakis]

To alsa ήταν εγκαταστημένο στην έκδοση 1.0.28 από την αρχική εγκατάσταση του lxde debian 7 όπου και ο ήχος έπαιζε, αλλά με συνεχόμενες διακοπές οπότε και αναβάθμισα σε debian testing, μήπως και διορθωθεί το πρόβλημα με αποτέλεσμα όμως να μην έχω καθόλου ήχο τώρα. Το alsamixer πάντως ανοίγει κανονικά αλλα μου έχει μόνο το master το οποίο δεν κάνει και τίποτα...

Σε κάποια ποστ που βρήκα στο internet έλεγε ότι διορθωνόταν το πρόβλημα με επανεγκατάσταση του alsa και φόρτωση του κατάληλλου module. Αλλά αναφερόταν σε παλιότερες εκδόσεις linux καθώς και δεν ήξερα αν έχω το ίδιο πρόβλημα... Για αυτό ζήτησα την βοήθεια σας...

Όσον αφορά την κάρτα γραφικών δεν μου παρουσιάζει κάποιο ιδιαίτερο πρόβλημα. Παίζει μια χαρά. Άλλωστε το pc είναι σχετικά παλιό με 1 GB ram , μονοπύρηνο , και προορίζετε για κανενα skype και πλοήγηση στο ιντερνετ , τίποτα περισσότερο. Αλλά γενικά με LXDE λειτουργεί "ανησυχητικά" γρήγορα...

[the_eye]

Από το λινκ που έδωσες δεν φαίνεται να έχει φορτώσει alsa.

Αλλά γενικά με LXDE λειτουργεί "ανησυχητικά" γρήγορα...

Μην σε ανησυχεί, όταν θα ανοίξει το youtube θα σέρνετε μια χαρά

[mangelasakis]

Από το λινκ που έδωσες δεν φαίνεται να έχει φορτώσει alsa.

Αλλά γενικά με LXDE λειτουργεί "ανησυχητικά" γρήγορα...

Μην σε ανησυχεί, όταν θα ανοίξει το youtube θα σέρνετε μια χαρά

Όχι μια χαρά παίζει και youtube (αν και λάθος όμως από youtube δοκιμάζω τον ήχο). Τώρα είμαι δουλειά και δεν έχω το laptop μαζί μου και γενικά δεν έχω πολύ χρόνο να ασχοληθώ. Μόλις πάω σπίτι θα σας στείλω και αλλες πληροφορίες για το laptop. Το κυριότερο πρόβλημα πάντως είναι ότι δεν έχει ήχο και άρα δεν μπορεί να κάνει κλήση σε skyp αφού κυρίως για κλησεις skype προορίζεται κυρίως...

[mangelasakis]

ρε παιδιά καμία λύση τιποτα; Θα αναγκαστώ να του βάλω παραθύρια ξανά....

[the_eye]

Δοκίμασε και με κανένα livecd ubuntu, έχει ήχο ;

[mangelasakis]

έχω δοκιμάσει με 14.04 και 14.10 και δεν είχε ήχο και με 12.04 το οποίο δεν έτρεξε από usb live (συγκεκριμένα κόλαγε στο boot), και επίσης έχω δοκιμάσει και με fedora και με debian τώρα. Θα ξαναδοκιμάσω με live dvd ubuntu 12.04 αλλά δεν νομίζω να κάνω κάτι...
Εdit:
λοιπόν αυτή την στιγμή είμαι με ubuntu 12.04.5 x32 και δεν έχω ήχο. Δεν έχει εγκαταστήσει καν το alsa...