ηχος tvtime

[elias1982]

γεια σας παιδια! εχτες εγκατεστησα το ubuntu 10.10. εγκατεστησα και το tvtime αλλα δεν εχω ηχο εικονα εχω. στο 10.04 που ειχα ως προχτες εβγαζε ηχο. στο alsamixer και στις ρυθμισεις ηχου ειναι ολα στο τερμα της εντασης και χωρις να ειναι επιλεγμενη η σιγαση. εν τω μεταξυ και στο 9.04 ubuntu που εχω παραλληλα εγκατεστημενο βγαζει ηχο οπως και στα παραθυρα. τι μπορει να συμβαινει?

[elias1982]

up

[elias1982]

up

[elias1982]

up

[Mitsakos]

Φίλε μου δεν χρειάζεται να κάνεις ποστ συνεχόμενα και μέσα σε μερικές ώρες για να πάρεις απάντηση στο πρόβλημά σου.
Όταν κάποιος διαβάσει το μήνυμα και ξέρει κάτι που θα βοηθήσει θα σου απαντήσει.

Υπομονή...

[idomeneas]

Έχεις κάποιο tvtuner ; Μήπως είχες ήχο από το tvtime στο 9.04 και 10.04 με κάποια εντολή sox για να γίνει η ανακατεύθυνση του ήχου από την κάρτα τηλεόρασης προς την κάρτα ήχου σου ; Π.χ.

Κώδικας: Επιλογή όλων

sox --channels 2 -s --rate 44100 --type ossdsp /dev/dsp1 --type ossdsp /dev/dsp

Δώσε αποτέλεσμα και από

Κώδικας: Επιλογή όλων

dmesg | grep saa*

[elias1982]

γεια σας! εχω tvtuner. δεν εβαζα καμια εντολη sox για ανακατευθυνση του ηχου.

Κώδικας: Επιλογή όλων

elias1982@elias1982-P55-US3L:~$ dmesg | grep saa*
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfbe0000 (usable)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 0000000000100000 - 00000000dfbe0000 (usable)
[ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfbe0000 - 00000000dfbe2000
[ 0.000000] PM: Registered nosave memory: 00000000dfbe2000 - 00000000dfbf0000
[ 0.000000] PM: Registered nosave memory: 00000000dfbf0000 - 00000000dfc00000
[ 0.000000] PM: Registered nosave memory: 00000000dfc00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.786860] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.787157] pci 0000:00:03.0: PME# disabled
[ 0.787613] pci 0000:00:1a.7: PME# disabled
[ 0.787685] pci 0000:00:1b.0: PME# disabled
[ 0.787745] pci 0000:00:1c.0: PME# disabled
[ 0.787808] pci 0000:00:1c.4: PME# disabled
[ 0.787868] pci 0000:00:1c.5: PME# disabled
[ 0.788133] pci 0000:00:1d.7: PME# disabled
[ 0.807647] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.807650] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.807655] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.807801] pci 0000:03:00.0: PME# disabled
[ 0.807933] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.807956] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.808096] pci 0000:04:00.0: PME# disabled
[ 0.827682] pci 0000:05:03.0: PME# disabled
[ 0.827789] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.827797] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.846423] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.891109] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.891116] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 2.287144] audit: initializing netlink socket (disabled)
[ 2.306331] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 2.306544] tun: Universal TUN/TAP device driver, 1.6
[ 2.346928] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.348038] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.349353] lo: Disabled Privacy Extensions
[ 16.373919] Disabling lock debugging due to kernel taint
[ 16.412502] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 16.412552] saa7134 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.412557] saa7134[0]: found at 0000:05:04.0, rev: 1, irq: 16, latency: 32, mmio: 0xfbcfe000
[ 16.412564] saa7134[0]: subsystem: 153b:1158, board: Terratec Cinergy 600 TV MK3 [card=48,autodetected]
[ 16.412604] saa7134[0]: board init: gpio is 50000
[ 16.438310] input: saa7134 IR (Terratec Cinergy 60 as /devices/pci0000:00/0000:00:1e.0/0000:05:04.0/rc/rc0/input4
[ 16.438363] rc0: saa7134 IR (Terratec Cinergy 60 as /devices/pci0000:00/0000:00:1e.0/0000:05:04.0/rc/rc0
[ 16.619383] saa7134[0]: i2c eeprom 00: 3b 15 58 11 ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619390] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619396] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619401] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619406] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619412] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619417] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619423] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619428] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619433] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619439] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619444] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619449] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619455] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619460] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.619466] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.859410] tuner 0-0043: chip found @ 0x86 (saa7134[0])
[ 16.917952] tuner 0-0060: chip found @ 0xc0 (saa7134[0])
[ 17.099085] saa6588 0-0010: saa6588 found @ 0x20 (saa7134[0])
[ 17.127189] saa7134[0]: found RDS decoder
[ 17.157354] saa7134[0]: registered device video0 [v4l2]
[ 17.157416] saa7134[0]: registered device vbi0
[ 17.157433] saa7134[0]: registered device radio0
[ 17.160764] saa7134 ALSA driver for DMA sound loaded
[ 17.160781] saa7134[0]/alsa: saa7134[0] at 0xfbcfe000 irq 16 registered as card -2


[the_eye]

Πες μας τι tvtuner έχεις

[elias1982]

εχω εσωτερικη καρτα tvtuner το μοντελο ειναι terratec cinergy 600 tv

[elias1982]

up