Δεν Έχω Ήχο σε Opera/Firefox

[Manny]

Παιδιά καλημέρα,
σε ubuntu 10.10 μου παρουσιάζεται το εξής πρόβλημα: ενώ μετά την εγκατάσταση του λειτουργικού όλα φαίνονταν να λειτουργούν εντάξει, μετά από κάπχοιο κλείσιμο/άνοιγμα του πισί δεν είχα καθόλου ήχο. Μέσα από οδηγούς και βοήθειες από το φόρουμ κατάφερα να έχω ήχο σε όλα τα βίντεο και τη μουσική μου. Αλλά όχι στους μπράουζερς. Έχω δοκιμάσει να εγκαταστήσω την τελευταία έκδοση alsa, με alsamixer, μέσα απτις ρυθμίσεις της κάρτας ήχου μπας και κάτι είναι mute κλπ αλλά τζίφος..Κι εδώ έχω κολλήσει γιατί δεν βρήκα σχετική περίπτωση με τη δικιά μου..
οπότε και ζητώ τη βοήθειά σας.
παραθέτω εντολές από alsa config κλπ για να σας κατατοπίσω το δυνατό περισσότερο στο πρόβλημά μου

http://www.alsa-project.org/db/?f=8d1b8f010b518492fed8f09528a259d533c5ba55

Κώδικας: Επιλογή όλων

aplay -l

Κώδικας: Επιλογή όλων

**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CA0106 [CA0106], device 0: ca0106 [CA0106]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CA0106 [CA0106], device 1: ca0106 [CA0106]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CA0106 [CA0106], device 2: ca0106 [CA0106]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CA0106 [CA0106], device 3: ca0106 [CA0106]
Subdevices: 1/1
Subdevice #0: subdevice #0

Κώδικας: Επιλογή όλων

dmesg

Κώδικας: Επιλογή όλων

[ 0.527557] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.527623] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.527633] alloc irq_desc for 41 on node 0
[ 0.527634] alloc kstat_irqs on node 0
[ 0.527639] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.527697] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.527707] alloc irq_desc for 42 on node 0
[ 0.527709] alloc kstat_irqs on node 0
[ 0.527713] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.527776] pcieport 0000:00:0e.0: setting latency timer to 64
[ 0.527787] alloc irq_desc for 43 on node 0
[ 0.527788] alloc kstat_irqs on node 0
[ 0.527792] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.527849] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.527868] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.528042] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.528047] ACPI: Power Button [PWRB]
[ 0.528101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.528104] ACPI: Power Button [PWRF]
[ 0.528156] ACPI: Fan [FAN] (on)
[ 0.528703] ACPI: acpi_idle registered with cpuidle
[ 0.533249] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.533256] ACPI: Thermal Zone [THRM] (40 C)
[ 0.533304] ERST: Table is not found!
[ 0.533490] Linux agpgart interface v0.103
[ 0.533494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.533585] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.533860] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.534887] brd: module loaded
[ 0.535346] loop: module loaded
[ 0.535651] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.536057] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.536063] alloc irq_desc for 23 on node 0
[ 0.536064] alloc kstat_irqs on node 0
[ 0.536076] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.536089] pata_acpi 0000:00:07.0: setting latency timer to 64
[ 0.536095] pata_acpi 0000:00:07.0: PCI INT A disabled
[ 0.536434] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 0.536437] alloc irq_desc for 22 on node 0
[ 0.536438] alloc kstat_irqs on node 0
[ 0.536443] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 0.536469] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.536474] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 0.536825] Fixed MDIO Bus: probed
[ 0.536854] PPP generic driver version 2.4.2
[ 0.536888] tun: Universal TUN/TAP device driver, 1.6
[ 0.536889] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.536973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.537240] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 0.537242] alloc irq_desc for 21 on node 0
[ 0.537244] alloc kstat_irqs on node 0
[ 0.537249] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 0.537264] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.537267] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.537298] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.537328] ehci_hcd 0000:00:02.1: debug port 1
[ 0.537332] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[ 0.537351] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[ 0.549718] Freeing initrd memory: 10748k freed
[ 0.550015] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.550145] hub 1-0:1.0: USB hub found
[ 0.550152] hub 1-0:1.0: 8 ports detected
[ 0.550246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.550580] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 0.550582] alloc irq_desc for 20 on node 0
[ 0.550584] alloc kstat_irqs on node 0
[ 0.550589] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 0.550599] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.550601] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.550651] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.550674] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 0.612092] hub 2-0:1.0: USB hub found
[ 0.612096] hub 2-0:1.0: 8 ports detected
[ 0.612206] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.612336] PNP: No PS/2 controller found. Probing ports directly.
[ 0.612714] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.612722] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.612816] mice: PS/2 mouse device common for all mice
[ 0.612919] rtc_cmos 00:05: RTC can wake from S4
[ 0.612958] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.612982] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.613066] device-mapper: uevent: version 1.0.3
[ 0.613167] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.613283] device-mapper: multipath: version 1.1.1 loaded
[ 0.613286] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.613497] cpuidle: using governor ladder
[ 0.613499] cpuidle: using governor menu
[ 0.613749] TCP cubic registered
[ 0.613870] NET: Registered protocol family 10
[ 0.614242] lo: Disabled Privacy Extensions
[ 0.614468] NET: Registered protocol family 17
[ 0.614498] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
[ 0.614511] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.614512] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.614601] PM: Resume from disk failed.
[ 0.614613] registered taskstats version 1
[ 0.614810] Magic number: 15:349:881
[ 0.614910] rtc_cmos 00:05: setting system clock to 2011-02-13 10:51:00 UTC (1297594260)
[ 0.614912] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.614914] EDD information not available.
[ 0.614995] Freeing unused kernel memory: 908k freed
[ 0.615470] Write protecting the kernel read-only data: 10240k
[ 0.615609] Freeing unused kernel memory: 412k freed
[ 0.615995] Freeing unused kernel memory: 1644k freed
[ 0.633232] udev[108]: starting version 163
[ 0.712886] sata_nv 0000:00:07.0: version 3.5
[ 0.712904] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.712964] sata_nv 0000:00:07.0: setting latency timer to 64
[ 0.728296] Floppy drive(s): fd0 is 1.44M
[ 0.744310] FDC 0 is a post-1991 82077
[ 0.746584] scsi0 : sata_nv
[ 0.763737] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 0.763744] alloc irq_desc for 17 on node 0
[ 0.763746] alloc kstat_irqs on node 0
[ 0.763757] firewire_ohci 0000:01:01.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 0.766729] scsi1 : sata_nv
[ 0.766983] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[ 0.766986] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[ 0.767129] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 0.767188] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.767243] scsi2 : sata_nv
[ 0.767339] scsi3 : sata_nv
[ 0.767506] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22
[ 0.767508] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22
[ 0.767776] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.768195] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.768198] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.768201] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.768247] nv_probe: set workaround bit for reversed mac addr
[ 0.882514] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.920010] firewire_ohci: Added fw-ohci device 0000:01:01.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[ 1.032071] hub 1-1:1.0: USB hub found
[ 1.032387] hub 1-1:1.0: 4 ports detected
[ 1.092516] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.250017] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.270382] ata3.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 1.270385] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.280012] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 1.290399] ata3.00: configured for UDMA/133
[ 1.290755] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:18:f3:80:eb:4a
[ 1.290758] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 1.290823] pata_amd 0000:00:06.0: version 0.4.1
[ 1.290870] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.290928] scsi4 : pata_amd
[ 1.291000] scsi5 : pata_amd
[ 1.291767] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.291770] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.400086] firewire_core: created device fw0: GUID 0011d8000091fab1, S400
[ 1.420015] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.420167] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[ 1.420300] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.420329] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.420397] sd 2:0:0:0: [sda] Write Protect is off
[ 1.420400] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.420521] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.421092] sda: sda1 sda2 sda3 <
[ 1.441474] Initializing USB Mass Storage driver...
[ 1.441626] scsi6 : usb-storage 1-4:1.0
[ 1.441730] usbcore: registered new interface driver usb-storage
[ 1.441733] USB Mass Storage support registered.
[ 1.444948] sda5 sda6 sda7 >
[ 1.488604] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.560013] usb 1-5: new high speed USB device using ehci_hcd and address 6
[ 1.704955] scsi7 : usb-storage 1-5:1.0
[ 1.752515] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.950245] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A300, max UDMA/66
[ 1.950271] ata6.01: ATAPI: HL-DT-ST DVDRAM GSA-H42L, SL00, max UDMA/66
[ 1.950291] ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c5) ACPI=0x1f01f (30:30:0x1f)
[ 1.950296] ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c5) ACPI=0x1f01f (30:30:0x1f)
[ 1.990190] ata6.00: configured for UDMA/66
[ 2.030189] ata6.01: configured for UDMA/66
[ 2.038011] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4160B A300 PQ: 0 ANSI: 5
[ 2.050300] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.050303] Uniform CD-ROM driver Revision: 3.20
[ 2.050426] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.050495] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.053875] scsi 5:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H42L SL00 PQ: 0 ANSI: 5
[ 2.064707] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.064793] sr 5:0:1:0: Attached scsi CD-ROM sr1
[ 2.064867] sr 5:0:1:0: Attached scsi generic sg2 type 5
[ 2.110023] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 2.357003] usbcore: registered new interface driver hiddev
[ 2.364332] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
[ 2.364421] generic-usb 0003:046D:C316.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-2/input0
[ 2.378075] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3
[ 2.378132] generic-usb 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-2/input1
[ 2.378147] usbcore: registered new interface driver usbhid
[ 2.378149] usbhid: USB HID core driver
[ 2.434661] scsi 6:0:0:0: Direct-Access WD My Passport 070A 1030 PQ: 0 ANSI: 4
[ 2.435396] scsi 6:0:0:1: CD-ROM WD Virtual CD 070A 1030 PQ: 0 ANSI: 4
[ 2.436144] scsi 6:0:0:2: Enclosure WD SES Device 1030 PQ: 0 ANSI: 4
[ 2.436713] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 2.438020] sd 6:0:0:0: [sdb] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 2.440518] sr2: scsi3-mmc drive: 51x/51x caddy
[ 2.441051] sr 6:0:0:1: Attached scsi CD-ROM sr2
[ 2.441115] sr 6:0:0:1: Attached scsi generic sg4 type 5
[ 2.441748] scsi 6:0:0:2: Attached scsi generic sg5 type 13
[ 2.442545] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.442549] sd 6:0:0:0: [sdb] Mode Sense: 23 00 10 00
[ 2.442552] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.445540] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.445550] sdb: sdb1
[ 2.446030] sdb: p1 size 975402477 extends beyond EOD, enabling native capacity
[ 2.449519] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.449527] sdb: sdb1
[ 2.450035] sdb: p1 size 975402477 extends beyond EOD, truncated
[ 2.453531] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.453536] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.454770] ses 6:0:0:2: Attached Enclosure device
[ 2.682516] usb 2-3: new low speed USB device using ohci_hcd and address 3
[ 2.712652] scsi 7:0:0:0: Direct-Access WD 5000AAC External 1.65 PQ: 0 ANSI: 4
[ 2.713247] sd 7:0:0:0: Attached scsi generic sg6 type 0
[ 2.714282] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.716512] sd 7:0:0:0: [sdc] Write Protect is off
[ 2.716512] sd 7:0:0:0: [sdc] Mode Sense: 21 00 00 00
[ 2.716512] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 2.719512] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 2.719519] sdc: sdc1
[ 2.720497] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.723526] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 2.723530] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 2.933321] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4
[ 2.933405] generic-usb 0003:045E:001E.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:02.0-3/input0
[ 3.280041] usb 2-6: new low speed USB device using ohci_hcd and address 4
[ 3.566109] input: Logitech Logitech Racing Wheel as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input5
[ 3.566170] generic-usb 0003:046D:CA04.0004: input,hidraw3: USB HID v1.10 Joystick [Logitech Logitech Racing Wheel] on usb-0000:00:02.0-6/input0
[ 3.643652] usb 1-1.4: new high speed USB device using ehci_hcd and address 8
[ 3.762139] scsi8 : usb-storage 1-1.4:1.0
[ 4.751656] scsi 8:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
[ 4.752122] sd 8:0:0:0: Attached scsi generic sg7 type 0
[ 4.753390] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 13.681484] udev[488]: starting version 163
[ 13.711085] lp: driver loaded but no devices found
[ 13.740100] Adding 9964540k swap on /dev/sda7. Priority:-1 extents:1 across:9964540k
[ 13.818489] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[ 13.818561] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[ 13.854945] EDAC MC: Ver: 2.1.0 Jan 21 2011
[ 13.890297] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 13.921809] parport_pc 00:0a: reported by Plug and Play ACPI
[ 13.921849] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 13.926755] EDAC amd64_edac: Ver: 3.3.0 Jan 21 2011
[ 13.983627] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 13.983637] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 13.983639] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 13.983640] (Note that use of the override may cause unknown side effects.)
[ 13.983668] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 14.000256] lp0: using parport0 (interrupt-driven).
[ 14.019063] ppdev: user-space parallel port driver
[ 14.040183] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 14.040189] Disabling lock debugging due to kernel taint
[ 14.131566] [fglrx] Maximum main memory to use for locked dma buffers: 2871 MBytes.
[ 14.132035] [fglrx] vendor: 1002 device: 9442 count: 1
[ 14.132352] [fglrx] ioport: bar 4, base 0xac00, size: 0x100
[ 14.132660] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 14.132665] alloc irq_desc for 18 on node 0
[ 14.132667] alloc kstat_irqs on node 0
[ 14.132677] pci 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 14.132682] pci 0000:05:00.0: setting latency timer to 64
[ 14.132876] [fglrx] Kernel PAT support is enabled
[ 14.132904] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors
[ 14.137442] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 14.139003] type=1400 audit(1297587074.005:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=834 comm="apparmor_parser"
[ 14.139241] type=1400 audit(1297587074.005:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=834 comm="apparmor_parser"
[ 14.139375] type=1400 audit(1297587074.005:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=834 comm="apparmor_parser"
[ 14.140730] type=1400 audit(1297587074.015:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=816 comm="apparmor_parser"
[ 14.140975] type=1400 audit(1297587074.015:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=816 comm="apparmor_parser"
[ 14.141119] type=1400 audit(1297587074.015:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=816 comm="apparmor_parser"
[ 14.145028] type=1400 audit(1297587074.015:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=867 comm="apparmor_parser"
[ 14.147984] type=1400 audit(1297587074.015:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=868 comm="apparmor_parser"
[ 14.460918] type=1400 audit(1297587074.335:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1007 comm="apparmor_parser"
[ 14.464316] type=1400 audit(1297587074.335:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1008 comm="apparmor_parser"
[ 14.653223] snd_seq_oss: disagrees about version of symbol snd_info_register
[ 14.653228] snd_seq_oss: Unknown symbol snd_info_register (err -22)
[ 14.653381] snd_seq_oss: disagrees about version of symbol snd_info_create_module_entry
[ 14.653383] snd_seq_oss: Unknown symbol snd_info_create_module_entry (err -22)
[ 14.653699] snd_seq_oss: disagrees about version of symbol snd_info_free_entry
[ 14.653701] snd_seq_oss: Unknown symbol snd_info_free_entry (err -22)
[ 14.653779] snd_seq_oss: disagrees about version of symbol snd_seq_root
[ 14.653781] snd_seq_oss: Unknown symbol snd_seq_root (err -22)
[ 14.653955] snd_seq_oss: Unknown symbol snd_unregister_oss_device (err 0)
[ 14.654122] snd_seq_oss: Unknown symbol snd_register_oss_device (err 0)
[ 14.654204] snd_seq_oss: disagrees about version of symbol snd_seq_device_register_driver
[ 14.654206] snd_seq_oss: Unknown symbol snd_seq_device_register_driver (err -22)
[ 14.654637] snd_seq_oss: Unknown symbol snd_oss_info_register (err 0)
[ 14.655138] snd_seq_oss: disagrees about version of symbol snd_seq_create_kernel_client
[ 14.655140] snd_seq_oss: Unknown symbol snd_seq_create_kernel_client (err -22)
[ 14.655852] snd_seq_oss: disagrees about version of symbol snd_info_register
[ 14.655854] snd_seq_oss: Unknown symbol snd_info_register (err -22)
[ 14.656008] snd_seq_oss: disagrees about version of symbol snd_info_create_module_entry
[ 14.656010] snd_seq_oss: Unknown symbol snd_info_create_module_entry (err -22)
[ 14.656325] snd_seq_oss: disagrees about version of symbol snd_info_free_entry
[ 14.656327] snd_seq_oss: Unknown symbol snd_info_free_entry (err -22)
[ 14.656405] snd_seq_oss: disagrees about version of symbol snd_seq_root
[ 14.656407] snd_seq_oss: Unknown symbol snd_seq_root (err -22)
[ 14.656573] snd_seq_oss: Unknown symbol snd_unregister_oss_device (err 0)
[ 14.656740] snd_seq_oss: Unknown symbol snd_register_oss_device (err 0)
[ 14.656821] snd_seq_oss: disagrees about version of symbol snd_seq_device_register_driver
[ 14.656824] snd_seq_oss: Unknown symbol snd_seq_device_register_driver (err -22)
[ 14.657254] snd_seq_oss: Unknown symbol snd_oss_info_register (err 0)
[ 14.657754] snd_seq_oss: disagrees about version of symbol snd_seq_create_kernel_client
[ 14.657757] snd_seq_oss: Unknown symbol snd_seq_create_kernel_client (err -22)
[ 14.714024] snd_mixer_oss: disagrees about version of symbol snd_info_register
[ 14.714030] snd_mixer_oss: Unknown symbol snd_info_register (err -22)
[ 14.714109] snd_mixer_oss: disagrees about version of symbol snd_info_free_entry
[ 14.714111] snd_mixer_oss: Unknown symbol snd_info_free_entry (err -22)
[ 14.714291] snd_mixer_oss: Unknown symbol snd_unregister_oss_device (err 0)
[ 14.714395] snd_mixer_oss: disagrees about version of symbol snd_ctl_find_id
[ 14.714398] snd_mixer_oss: Unknown symbol snd_ctl_find_id (err -22)
[ 14.714493] snd_mixer_oss: disagrees about version of symbol snd_info_register
[ 14.714498] snd_mixer_oss: Unknown symbol snd_info_register (err -22)
[ 14.714580] snd_mixer_oss: Unknown symbol snd_register_oss_device (err 0)
[ 14.714657] snd_mixer_oss: disagrees about version of symbol snd_info_free_entry
[ 14.714660] snd_mixer_oss: Unknown symbol snd_info_free_entry (err -22)
[ 14.714750] snd_mixer_oss: disagrees about version of symbol snd_card_file_add
[ 14.714753] snd_mixer_oss: Unknown symbol snd_card_file_add (err -22)
[ 14.714921] snd_mixer_oss: Unknown symbol snd_unregister_oss_device (err 0)
[ 14.715003] snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback (err 0)
[ 14.715081] snd_mixer_oss: disagrees about version of symbol snd_ctl_find_id
[ 14.715083] snd_mixer_oss: Unknown symbol snd_ctl_find_id (err -22)
[ 14.715172] snd_mixer_oss: Unknown symbol snd_register_oss_device (err 0)
[ 14.715407] snd_mixer_oss: disagrees about version of symbol snd_card_file_add
[ 14.715409] snd_mixer_oss: Unknown symbol snd_card_file_add (err -22)
[ 14.715487] snd_mixer_oss: disagrees about version of symbol snd_cards
[ 14.715489] snd_mixer_oss: Unknown symbol snd_cards (err -22)
[ 14.715572] snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback (err 0)
[ 14.715842] snd_mixer_oss: disagrees about version of symbol snd_cards
[ 14.715844] snd_mixer_oss: Unknown symbol snd_cards (err -22)
[ 14.715921] snd_mixer_oss: disagrees about version of symbol snd_ctl_notify
[ 14.715923] snd_mixer_oss: Unknown symbol snd_ctl_notify (err -22)
[ 14.716011] snd_mixer_oss: Unknown symbol snd_oss_info_register (err 0)
[ 14.716137] snd_mixer_oss: disagrees about version of symbol snd_ctl_notify
[ 14.716139] snd_mixer_oss: Unknown symbol snd_ctl_notify (err -22)
[ 14.716227] snd_mixer_oss: Unknown symbol snd_oss_info_register (err 0)
[ 14.716392] snd_mixer_oss: Unknown symbol snd_lookup_oss_minor_data (err 0)
[ 14.716572] snd_mixer_oss: disagrees about version of symbol snd_info_create_card_entry
[ 14.716574] snd_mixer_oss: Unknown symbol snd_info_create_card_entry (err -22)
[ 14.716655] snd_mixer_oss: Unknown symbol snd_lookup_oss_minor_data (err 0)
[ 14.716746] snd_mixer_oss: disagrees about version of symbol snd_card_file_remove
[ 14.716748] snd_mixer_oss: Unknown symbol snd_card_file_remove (err -22)
[ 14.716836] snd_mixer_oss: disagrees about version of symbol snd_ctl_find_numid
[ 14.716838] snd_mixer_oss: Unknown symbol snd_ctl_find_numid (err -22)
[ 14.716942] snd_mixer_oss: disagrees about version of symbol snd_info_create_card_entry
[ 14.716945] snd_mixer_oss: Unknown symbol snd_info_create_card_entry (err -22)
[ 14.717118] snd_mixer_oss: disagrees about version of symbol snd_card_file_remove
[ 14.717120] snd_mixer_oss: Unknown symbol snd_card_file_remove (err -22)
[ 14.717206] snd_mixer_oss: disagrees about version of symbol snd_ctl_find_numid
[ 14.717208] snd_mixer_oss: Unknown symbol snd_ctl_find_numid (err -22)
[ 14.806543] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 14.806550] alloc irq_desc for 19 on node 0
[ 14.806552] alloc kstat_irqs on node 0
[ 14.806562] HDA Intel 0000:05:00.1: PCI INT B -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 14.806608] alloc irq_desc for 44 on node 0
[ 14.806609] alloc kstat_irqs on node 0
[ 14.806617] HDA Intel 0000:05:00.1: irq 44 for MSI/MSI-X
[ 14.806638] HDA Intel 0000:05:00.1: setting latency timer to 64
[ 14.806642] ALSA hda_intel.c:2561: chipset global capabilities = 0x1001
[ 14.826076] CA0106 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 14.826096] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[ 14.837753] ALSA ca0106_main.c:1844: ca0106: probe for MIDI channel A ...
[ 14.837759] ALSA ca0106_main.c:1848: done.
[ 14.841113] ALSA hda_intel.c:914: codec_mask = 0x1
[ 14.841999] ALSA hda_intel.c:1354: codec #0 probed OK
[ 14.911568] HDMI: sink_present = 0, eld_valid = 1
[ 15.213405] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 16.462256] alloc irq_desc for 45 on node 0
[ 16.462260] alloc kstat_irqs on node 0
[ 16.462270] fglrx_pci 0000:05:00.0: irq 45 for MSI/MSI-X
[ 16.462852] [fglrx] Firegl kernel thread PID: 1480
[ 16.463098] [fglrx] IRQ 45 Enabled
[ 16.877705] [fglrx] Gart USWC size:944 M.
[ 16.877708] [fglrx] Gart cacheable size:373 M.
[ 16.877714] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 16.877716] [fglrx] Reserved FB block: Unshared offset:fd0b000, size:2f5000
[ 16.877718] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 18.490450] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.038927] ALSA hda_intel.c:1679: azx_pcm_prepare: bufsize=0x3700, format=0x4011
[ 19.038951] ALSA hda_codec.c:1227: hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x4011
[ 19.052600] ALSA hda_intel.c:1679: azx_pcm_prepare: bufsize=0x3700, format=0x4011
[ 19.052622] ALSA hda_codec.c:1227: hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x4011
[ 19.053883] ALSA hda_codec.c:1290: hda_codec_cleanup_stream: NID=0x2
[ 19.053926] ALSA hda_codec.c:1290: hda_codec_cleanup_stream: NID=0x2
[ 19.056618] ALSA hda_intel.c:1679: azx_pcm_prepare: bufsize=0x10000, format=0x4011
[ 19.056639] ALSA hda_codec.c:1227: hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x4011
[ 19.056655] ALSA hda_intel.c:1679: azx_pcm_prepare: bufsize=0x10000, format=0x4011
[ 19.056673] ALSA hda_codec.c:1227: hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x4011
[ 19.189401] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 20.441577] UDF-fs: Partition marked readonly; forcing readonly mount
[ 20.442437] UDF-fs INFO UDF: Mounting volume 'WD SmartWare', timestamp 2009/09/11 21:33 (1078)
[ 24.107362] ALSA hda_codec.c:1290: hda_codec_cleanup_stream: NID=0x2
[ 24.107436] ALSA hda_codec.c:1290: hda_codec_cleanup_stream: NID=0x2
[ 25.140009] eth0: no IPv6 routers present
[ 1689.898987] ALSA hda_intel.c:1679: azx_pcm_prepare: bufsize=0x10000, format=0x4011
[ 1689.899011] ALSA hda_codec.c:1227: hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x4011
[ 1689.899028] ALSA hda_intel.c:1679: azx_pcm_prepare: bufsize=0x10000, format=0x4011
[ 1689.899045] ALSA hda_codec.c:1227: hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x4011
[ 1698.205369] ALSA hda_codec.c:1290: hda_codec_cleanup_stream: NID=0x2
[ 1698.205438] ALSA hda_codec.c:1290: hda_codec_cleanup_stream: NID=0x2


Όποιος μπορεί να με βοηθήσει...

[simosx]

Ο τρόπος για να έχεις ήχο σε Firefox είναι να έχει ήχο στο Flash. Οπότε, το πρόβλημα δεν είναι ουσιαστικά στο Firefox αλλά στο κλειστό λογισμικό Flash. Είναι έτσι;

Δες στο http://simos.info/blog/archives/804 για οδηγίες όπου εγκαθιστάς την 64-bit έκδοση του Flash (απεγκαθιστάς την έκδοση 32-bit).

Έκανες μια σειρά από αλλαγές στο σύστημά σου. Εγκατέστησες την Alsa 1.0.24 (βγήκε πριν λίγες μέρες). Όταν μεταγλωττίζεις το alsa-driver σε Ubuntu,
είναι καλό να βάζεις ./configure --with-oss=no όπου απενεργοποιηθεί το OSS.

Στο dmesg αναφέρει ότι έχεις απενεργοποιήσει κάτι στη μνήμη όπου δε λειτουργεί το ECC. Δες στο dmesg για περισσότερα.

[Manny]

Δες στο http://simos.info/blog/archives/804 για οδηγίες όπου εγκαθιστάς την 64-bit έκδοση του Flash (απεγκαθιστάς την έκδοση 32-bit).

Μπα-χα!! Όντως έφτιαξε!!

Έκανες μια σειρά από αλλαγές στο σύστημά σου. Εγκατέστησες την Alsa 1.0.24 (βγήκε πριν λίγες μέρες).

Όντως εγκατέστησα την Άλσα 1.0.24. Αλλά από κει και πέρα χάθηκα =/

Όταν μεταγλωττίζεις το alsa-driver σε Ubuntu,είναι καλό να βάζεις ./configure --with-oss=no όπου απενεργοποιηθεί το OSS.Στο dmesg αναφέρει ότι έχεις απενεργοποιήσει κάτι στη μνήμη όπου δε λειτουργεί το ECC. Δες στο dmesg για περισσότερα.

Εχμ... αυτό δεν το κατάλαβα καθόλου.. δεν ξέρω τί θα έπρεπε να κάνω. Σημασία έχει ότι έφτιαξε, όμως, ε;

Off topic:
Όταν λέτε για μεταγλώττιση, είναι κυριολεκτικό, ή κάπχοιος όρος που δεν ξέρω..;

Μία τελευταία ερώτηση: είναι λογικό όταν πχ παίζει ένα τραγούδι στο audacious, να μην παίζει ήχος στο γιου τιουμπ; ή όταν παίζει ένα βίντεο στο γιου τιουμπ, να μην ξεκινάει ένα τραγούδι, ή μια ταινία χωρίς ήχο; (3 ερωτήσεις ε..; )

Σίμο και πάλι, ευχαριστώ πάρα πολύ!! =)

[simosx]

Πολύ ωραία. Οπότε πάτησε εκείνο το πράσινο τικ για να σημάνεις με ποια απάντηση βρέθηκε η λύση.

μεταγλώττιση = compile. Μπορείς να το αφήσεις αυτό όπως είναι.

Υπάρχουν εφαρμογές που χρησιμοποιούν, για έξοδο ήχου, τα υποσυστήματα 1. OSS, 2. ALSA και 3. PulseAudio.
Αν τα καθορίσεις όλα σε PulseAudio, τότε είσαι μια χαρά.
Αν μια εφαρμογή χρησιμοποιεί Alsa, το βάζεις να γίνει PulseAudio. Αν δεν έχει, τότε δεν την χρησιμοποιείς.
Αν μια εφαρμογή χρησιμοποιεί μόνο OSS, τότε δε θα δουλέψει πια με το Ubuntu 10.10 ή νεότερο.

[Manny]

Αν τα καθορίσεις όλα σε PulseAudio, τότε είσαι μια χαρά.

Να υποθέσω αυτό γίνεται χειροκίνητα ένα πρόγραμμα τη φορά και ότι πρέπει να χρησιμοποιώ προγράμματα που χρησιμοποιούν PulsaAudio.. Έγινε!!
=)

[simosx]

Αν τα καθορίσεις όλα σε PulseAudio, τότε είσαι μια χαρά.

Να υποθέσω αυτό γίνεται χειροκίνητα ένα πρόγραμμα τη φορά και ότι πρέπει να χρησιμοποιώ προγράμματα που χρησιμοποιούν PulsaAudio.. Έγινε!!
=)

Κάποια προγράμματα επιτρέπουν να επιλέξεις μεταξύ Alsa ή PulseAudio, οπότε επιλέγεις (μια φορά) το PulseAudio και είσαι εντάξει.
Κάποια παλιά παιχνίδια υποστηρίζουν μόνο το λεγόμενο OSS οπότε για τις εφαρμογές αυτές δεν λειτουργεί πια ήχος σε Ubuntu 10.10 ή νεότερο.
Το OSS emultion ήταν «deprecated» εδώ και πέντε χρόνια, και τώρα έγινε η αλλαγή ώστε να απενεργοποιηθεί.

[Manny]

Το πρόβλημα (με το flash;; ) συνεχίζει.. =(
Δεν έχω καταφέρει να καταλάβω αν κάτι το προκαλεί. Είναι φορές που όταν ανοίγω τον υπολογιστή έχω ήχο και είναι φορές που δεν έχω. Σα να γίνεται τελείως αυθαίρετα. Απεγκατέστηκα και επανεγκατέστηκα το flash, αλλά το πρόβλημα εξακολουθεί να υπάρχει. Οι ρυθμίσεις του alsamixer είναι οι ίδιες. Δεν τις έχω πειράξει. Έχω συνδεθεί και σε kernel 2.6.35-25 και σε 2.6.35-22, αλλά πάλι το ίδιο πράμα. Επίσης, όταν έχω ήχο και έχω βάλει πχ ράδιο στον opera/mozilla δεν έχω ήχο στο vlc ή σε κάποιο άλλο media player. Και το αντίθετο. Είναι λογικό αυτό;

Συνέχισα το ίδιο θέμα, γιατί κρίνω ότι είναι το ίδιο πρόβλημα. Δεν ξέρω αν έπρεπε να δημιουργήσω καινούριο θέμα.. =/

[simosx]

Δώσε ένα φρέσκο alsa-info.

Ακόμα, πήγαινε στο (Firefox) Εργαλεία→Πρόσθετα→Plugins και ανέφερε τι έκδοση εμφανίζει για το flash, ή αν έχει παραπάνω από ένα plugin για Flash.

[Manny]

Κώδικας: Επιλογή όλων

Alsa config

http://www.alsa-project.org/db/?f=682a9 ... 25dec15390

Κώδικας: Επιλογή όλων

aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: CA0106 [CA0106], device 0: ca0106 [CA0106]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: CA0106 [CA0106], device 1: ca0106 [CA0106]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: CA0106 [CA0106], device 2: ca0106 [CA0106]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: CA0106 [CA0106], device 3: ca0106 [CA0106]
Subdevices: 1/1
Subdevice #0: subdevice #0

Κώδικας: Επιλογή όλων

dmesg

Κώδικας: Επιλογή όλων

[ 0.462340] pci 0000:00:0e.0: setting latency timer to 64
[ 0.462343] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.462345] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.462347] pci_bus 0000:00: resource 6 [mem 0xfe030000-0xfcffffffff]
[ 0.462350] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xefffffff]
[ 0.462352] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfe02ffff]
[ 0.462354] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.462356] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.462358] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.462360] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.462363] pci_bus 0000:01: resource 6 [mem 0xfe030000-0xfcffffffff]
[ 0.462365] pci_bus 0000:01: resource 7 [mem 0xc0000000-0xefffffff]
[ 0.462367] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfe02ffff]
[ 0.462370] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.462372] pci_bus 0000:05: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.462374] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.462414] NET: Registered protocol family 2
[ 0.462567] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.464391] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.471442] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.472300] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.472303] TCP reno registered
[ 0.472319] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.472383] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.472551] NET: Registered protocol family 1
[ 0.490070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.490075] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.490081] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.490084] pci 0000:00:0b.0: Linking AER extended capability
[ 0.490114] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.490118] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.490125] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.490127] pci 0000:00:0c.0: Linking AER extended capability
[ 0.490159] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.490163] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.490170] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.490172] pci 0000:00:0d.0: Linking AER extended capability
[ 0.490206] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.490210] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.490217] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.490219] pci 0000:00:0e.0: Linking AER extended capability
[ 0.490236] pci 0000:05:00.0: Boot video device
[ 0.490241] PCI: CLS 32 bytes, default 64
[ 0.491254] Scanning for low memory corruption every 60 seconds
[ 0.491371] audit: initializing netlink socket (disabled)
[ 0.491380] type=2000 audit(1299105432.490:1): initialized
[ 0.502845] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.504171] VFS: Disk quotas dquot_6.5.2
[ 0.504230] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.504807] fuse init (API version 7.14)
[ 0.504884] msgmni has been set to 6008
[ 0.549338] Freeing initrd memory: 10756k freed
[ 0.559655] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.559658] io scheduler noop registered
[ 0.559659] io scheduler deadline registered
[ 0.559698] io scheduler cfq registered (default)
[ 0.559837] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.559851] alloc irq_desc for 40 on node 0
[ 0.559853] alloc kstat_irqs on node 0
[ 0.559862] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.559963] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.559974] alloc irq_desc for 41 on node 0
[ 0.559975] alloc kstat_irqs on node 0
[ 0.559979] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.560072] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.560082] alloc irq_desc for 42 on node 0
[ 0.560084] alloc kstat_irqs on node 0
[ 0.560088] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.560159] pcieport 0000:00:0e.0: setting latency timer to 64
[ 0.560169] alloc irq_desc for 43 on node 0
[ 0.560170] alloc kstat_irqs on node 0
[ 0.560174] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.560266] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.560289] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.560489] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.560496] ACPI: Power Button [PWRB]
[ 0.560553] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.560556] ACPI: Power Button [PWRF]
[ 0.560609] ACPI: Fan [FAN] (on)
[ 0.561165] ACPI: acpi_idle registered with cpuidle
[ 0.565706] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.565714] ACPI: Thermal Zone [THRM] (40 C)
[ 0.565763] ERST: Table is not found!
[ 0.565979] Linux agpgart interface v0.103
[ 0.565983] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.566070] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.566332] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.567325] brd: module loaded
[ 0.567761] loop: module loaded
[ 0.568037] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.568460] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.568464] alloc irq_desc for 23 on node 0
[ 0.568465] alloc kstat_irqs on node 0
[ 0.568472] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.568492] pata_acpi 0000:00:07.0: setting latency timer to 64
[ 0.568498] pata_acpi 0000:00:07.0: PCI INT A disabled
[ 0.568841] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 0.568844] alloc irq_desc for 22 on node 0
[ 0.568845] alloc kstat_irqs on node 0
[ 0.568850] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 0.568873] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.568879] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 0.569228] Fixed MDIO Bus: probed
[ 0.569255] PPP generic driver version 2.4.2
[ 0.569284] tun: Universal TUN/TAP device driver, 1.6
[ 0.569286] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.569347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.569622] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 0.569625] alloc irq_desc for 21 on node 0
[ 0.569626] alloc kstat_irqs on node 0
[ 0.569632] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 0.569647] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.569650] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.569716] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.569744] ehci_hcd 0000:00:02.1: debug port 1
[ 0.569749] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[ 0.569767] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[ 0.580023] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.580128] hub 1-0:1.0: USB hub found
[ 0.580133] hub 1-0:1.0: 8 ports detected
[ 0.580209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.580488] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 0.580490] alloc irq_desc for 20 on node 0
[ 0.580492] alloc kstat_irqs on node 0
[ 0.580497] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 0.580505] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.580507] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.580543] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.580563] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 0.642089] hub 2-0:1.0: USB hub found
[ 0.642094] hub 2-0:1.0: 8 ports detected
[ 0.642165] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.642254] PNP: No PS/2 controller found. Probing ports directly.
[ 0.642607] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.642614] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.642681] mice: PS/2 mouse device common for all mice
[ 0.642775] rtc_cmos 00:05: RTC can wake from S4
[ 0.642814] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.642838] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.642922] device-mapper: uevent: version 1.0.3
[ 0.643012] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.643115] device-mapper: multipath: version 1.1.1 loaded
[ 0.643118] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.643329] cpuidle: using governor ladder
[ 0.643331] cpuidle: using governor menu
[ 0.643579] TCP cubic registered
[ 0.643698] NET: Registered protocol family 10
[ 0.644061] lo: Disabled Privacy Extensions
[ 0.644244] NET: Registered protocol family 17
[ 0.644278] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
[ 0.644289] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.644290] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.644370] PM: Resume from disk failed.
[ 0.644380] registered taskstats version 1
[ 0.644577] Magic number: 3:47:653
[ 0.644687] rtc_cmos 00:05: setting system clock to 2011-03-02 22:37:13 UTC (1299105433)
[ 0.644689] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.644691] EDD information not available.
[ 0.644766] Freeing unused kernel memory: 912k freed
[ 0.645214] Write protecting the kernel read-only data: 10240k
[ 0.645354] Freeing unused kernel memory: 408k freed
[ 0.645734] Freeing unused kernel memory: 1644k freed
[ 0.662394] udev[108]: starting version 163
[ 0.747800] Floppy drive(s): fd0 is 1.44M
[ 0.753340] sata_nv 0000:00:07.0: version 3.5
[ 0.753362] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.753437] sata_nv 0000:00:07.0: setting latency timer to 64
[ 0.765783] scsi0 : sata_nv
[ 0.769483] FDC 0 is a post-1991 82077
[ 0.792386] scsi1 : sata_nv
[ 0.792634] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[ 0.792637] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[ 0.797045] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 0.797053] alloc irq_desc for 17 on node 0
[ 0.797056] alloc kstat_irqs on node 0
[ 0.797068] firewire_ohci 0000:01:01.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 0.797368] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 0.797409] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.798938] scsi2 : sata_nv
[ 0.799093] scsi3 : sata_nv
[ 0.799301] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22
[ 0.799305] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22
[ 0.799566] pata_amd 0000:00:06.0: version 0.4.1
[ 0.799609] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.799664] scsi4 : pata_amd
[ 0.799760] scsi5 : pata_amd
[ 0.800566] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.800569] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.800831] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.801228] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.801233] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.801236] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.801289] nv_probe: set workaround bit for reversed mac addr
[ 0.902512] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.950011] firewire_ohci: Added fw-ohci device 0000:01:01.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[ 1.064466] hub 1-1:1.0: USB hub found
[ 1.064789] hub 1-1:1.0: 4 ports detected
[ 1.120049] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.280018] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.300014] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 1.301207] ata3.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 1.301210] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.330703] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:18:f3:80:eb:4a
[ 1.330707] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 1.340259] ata3.00: configured for UDMA/133
[ 1.432590] firewire_core: created device fw0: GUID 0011d8000091fab1, S400
[ 1.450013] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.450162] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[ 1.450299] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.450323] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.450346] sd 2:0:0:0: [sda] Write Protect is off
[ 1.450349] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.450369] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.450562] sda:
[ 1.458939] Initializing USB Mass Storage driver...
[ 1.459105] scsi6 : usb-storage 1-4:1.0
[ 1.459206] usbcore: registered new interface driver usb-storage
[ 1.459209] USB Mass Storage support registered.
[ 1.469980] sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.515590] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.570012] usb 1-5: new high speed USB device using ehci_hcd and address 6
[ 1.725210] scsi7 : usb-storage 1-5:1.0
[ 1.940023] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.960218] ata4.00: ATA-7: ST3250410AS, 3.AAA, max UDMA/133
[ 1.960220] ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 2.002712] ata4.00: configured for UDMA/133
[ 2.002825] scsi 3:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
[ 2.002969] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.002977] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.003074] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.003076] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.003095] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.003282] sdb: sdb1
[ 2.016874] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.120012] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 2.202738] ata6.00: ATAPI: ATAPI iHAP122 W, LL06, max UDMA/66
[ 2.202762] ata6.01: ATAPI: HL-DT-ST DVDRAM GSA-H42L, SL00, max UDMA/66
[ 2.202782] ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c5) ACPI=0x1f01f (30:30:0x1f)
[ 2.202787] ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c5) ACPI=0x1f01f (30:30:0x1f)
[ 2.240191] ata6.00: configured for UDMA/66
[ 2.280188] ata6.01: configured for UDMA/66
[ 2.283380] scsi 5:0:0:0: CD-ROM ATAPI iHAP122 W LL06 PQ: 0 ANSI: 5
[ 2.288740] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.288743] Uniform CD-ROM driver Revision: 3.20
[ 2.288831] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.288893] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 2.292239] scsi 5:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H42L SL00 PQ: 0 ANSI: 5
[ 2.303073] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.303153] sr 5:0:1:0: Attached scsi CD-ROM sr1
[ 2.303198] sr 5:0:1:0: Attached scsi generic sg3 type 5
[ 2.375018] usbcore: registered new interface driver hiddev
[ 2.382330] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
[ 2.382425] generic-usb 0003:046D:C316.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-2/input0
[ 2.396114] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3
[ 2.396214] generic-usb 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-2/input1
[ 2.396237] usbcore: registered new interface driver usbhid
[ 2.396239] usbhid: USB HID core driver
[ 2.455059] scsi 6:0:0:0: Direct-Access WD My Passport 070A 1030 PQ: 0 ANSI: 4
[ 2.455797] scsi 6:0:0:1: CD-ROM WD Virtual CD 070A 1030 PQ: 0 ANSI: 4
[ 2.456546] scsi 6:0:0:2: Enclosure WD SES Device 1030 PQ: 0 ANSI: 4
[ 2.457077] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.458046] sd 6:0:0:0: [sdc] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 2.459922] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.459925] sd 6:0:0:0: [sdc] Mode Sense: 23 00 10 00
[ 2.459928] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2.462919] sr2: scsi3-mmc drive: 51x/51x caddy
[ 2.463008] sr 6:0:0:1: Attached scsi CD-ROM sr2
[ 2.463933] sr 6:0:0:1: Attached scsi generic sg5 type 5
[ 2.464399] scsi 6:0:0:2: Attached scsi generic sg6 type 13
[ 2.465939] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2.465947] sdc: sdc1
[ 2.466437] sdc: p1 size 975402477 extends beyond EOD, enabling native capacity
[ 2.468927] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2.468937] sdc: sdc1
[ 2.469427] sdc: p1 size 975402477 extends beyond EOD, truncated
[ 2.472933] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2.472937] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2.474147] ses 6:0:0:2: Attached Enclosure device
[ 2.702514] usb 2-3: new low speed USB device using ohci_hcd and address 3
[ 2.732056] scsi 7:0:0:0: Direct-Access WD 5000AAC External 1.65 PQ: 0 ANSI: 4
[ 2.732697] sd 7:0:0:0: Attached scsi generic sg7 type 0
[ 2.733418] sd 7:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.735921] sd 7:0:0:0: [sdd] Write Protect is off
[ 2.735924] sd 7:0:0:0: [sdd] Mode Sense: 21 00 00 00
[ 2.735926] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 2.738917] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 2.738924] sdd: sdd1
[ 2.742983] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 2.742987] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 2.964308] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4
[ 2.964420] generic-usb 0003:045E:001E.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:02.0-3/input0
[ 3.310029] usb 2-6: new low speed USB device using ohci_hcd and address 4
[ 3.599126] input: Logitech Logitech Racing Wheel as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input5
[ 3.599221] generic-usb 0003:046D:CA04.0004: input,hidraw3: USB HID v1.10 Joystick [Logitech Logitech Racing Wheel] on usb-0000:00:02.0-6/input0
[ 3.673043] usb 1-1.3: new full speed USB device using ehci_hcd and address 8
[ 3.779137] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.863050] usb 1-1.4: new high speed USB device using ehci_hcd and address 9
[ 3.974531] scsi8 : usb-storage 1-1.4:1.0
[ 4.975061] scsi 8:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
[ 4.975565] sd 8:0:0:0: Attached scsi generic sg8 type 0
[ 4.976915] sd 8:0:0:0: [sde] Attached SCSI removable disk
[ 16.850182] udev[478]: starting version 163
[ 16.946713] Adding 9964540k swap on /dev/sda7. Priority:-1 extents:1 across:9964540k
[ 17.597639] type=1400 audit(1299098250.440:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=910 comm="apparmor_parser"
[ 17.597685] type=1400 audit(1299098250.440:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=655 comm="apparmor_parser"
[ 17.597880] type=1400 audit(1299098250.440:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=910 comm="apparmor_parser"
[ 17.597929] type=1400 audit(1299098250.440:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=655 comm="apparmor_parser"
[ 17.598014] type=1400 audit(1299098250.440:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=910 comm="apparmor_parser"
[ 17.598067] type=1400 audit(1299098250.440:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=655 comm="apparmor_parser"
[ 17.600417] type=1400 audit(1299098250.450:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=971 comm="apparmor_parser"
[ 17.600513] type=1400 audit(1299098250.450:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=972 comm="apparmor_parser"
[ 17.655085] parport_pc 00:0a: reported by Plug and Play ACPI
[ 17.655125] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 17.833127] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 17.950928] ppdev: user-space parallel port driver
[ 17.958531] lp0: using parport0 (interrupt-driven).
[ 17.993449] EDAC MC: Ver: 2.1.0 Feb 22 2011
[ 18.019025] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.121522] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 18.130069] it87: Found IT8716F chip at 0x290, revision 1
[ 18.130078] it87: VID is disabled (pins used for GPIO)
[ 18.130085] it87: in3 is VCC (+5V)
[ 18.130086] it87: in7 is VCCH (+5V Stand-By)
[ 18.130175] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x0295-0x0296 window disabled]
[ 18.130178] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.157078] it87: Found IT8716F chip at 0x290, revision 1
[ 18.157087] it87: VID is disabled (pins used for GPIO)
[ 18.157094] it87: in3 is VCC (+5V)
[ 18.157095] it87: in7 is VCCH (+5V Stand-By)
[ 18.157214] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x0295-0x0296 window disabled]
[ 18.157216] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.178193] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 18.178198] Disabling lock debugging due to kernel taint
[ 18.239550] it87: Found IT8716F chip at 0x290, revision 1
[ 18.239559] it87: VID is disabled (pins used for GPIO)
[ 18.239566] it87: in3 is VCC (+5V)
[ 18.239567] it87: in7 is VCCH (+5V Stand-By)
[ 18.239794] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x0295-0x0296 window disabled]
[ 18.239797] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.250610] [fglrx] Maximum main memory to use for locked dma buffers: 2871 MBytes.
[ 18.250783] [fglrx] vendor: 1002 device: 9442 count: 1
[ 18.251120] [fglrx] ioport: bar 4, base 0xac00, size: 0x100
[ 18.251371] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 18.251376] alloc irq_desc for 18 on node 0
[ 18.251378] alloc kstat_irqs on node 0
[ 18.251387] pci 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 18.251392] pci 0000:05:00.0: setting latency timer to 64
[ 18.251583] [fglrx] Kernel PAT support is enabled
[ 18.251612] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors
[ 18.266936] EDAC amd64_edac: Ver: 3.3.0 Feb 22 2011
[ 18.267123] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 18.267132] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 18.267133] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 18.267134] (Note that use of the override may cause unknown side effects.)
[ 18.267220] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 18.449185] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[ 18.449432] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[ 18.509966] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 18.511102] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 18.511104] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 18.511106] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 18.609877] Linux video capture interface: v2.00
[ 18.661213] type=1400 audit(1299098251.500:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1129 comm="apparmor_parser"
[ 18.661687] type=1400 audit(1299098251.500:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1130 comm="apparmor_parser"
[ 18.698341] gspca: main v2.9.0 registered
[ 18.700004] gspca: probing 045e:00f7
[ 18.700517] sonixj: Sonix chip id: 11
[ 18.701067] input: sonixj as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.3/input/input6
[ 18.701283] gspca: video0 created
[ 18.701286] gspca: found int in endpoint: 0x83, buffer_len=1, interval=100
[ 18.701319] gspca: probing 045e:00f7
[ 18.701328] gspca: probing 045e:00f7
[ 18.701924] usbcore: registered new interface driver sonixj
[ 18.701926] sonixj: registered
[ 19.479971] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 19.479977] alloc irq_desc for 19 on node 0
[ 19.479980] alloc kstat_irqs on node 0
[ 19.480024] HDA Intel 0000:05:00.1: PCI INT B -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 19.480145] alloc irq_desc for 44 on node 0
[ 19.480147] alloc kstat_irqs on node 0
[ 19.480154] HDA Intel 0000:05:00.1: irq 44 for MSI/MSI-X
[ 19.480179] HDA Intel 0000:05:00.1: setting latency timer to 64
[ 19.501151] usbcore: registered new interface driver snd-usb-audio
[ 19.672494] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.817683] CA0106 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 19.817707] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[ 20.360420] alloc irq_desc for 45 on node 0
[ 20.360423] alloc kstat_irqs on node 0
[ 20.360433] fglrx_pci 0000:05:00.0: irq 45 for MSI/MSI-X
[ 20.361050] [fglrx] Firegl kernel thread PID: 1661
[ 20.361298] [fglrx] IRQ 45 Enabled
[ 21.584657] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 21.596065] [fglrx] Gart USWC size:944 M.
[ 21.596069] [fglrx] Gart cacheable size:373 M.
[ 21.596074] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 21.596076] [fglrx] Reserved FB block: Unshared offset:fd0b000, size:2f5000
[ 21.596078] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 23.705818] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 24.916481] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 27.156966] UDF-fs: Partition marked readonly; forcing readonly mount
[ 27.157483] UDF-fs INFO UDF: Mounting volume 'WD SmartWare', timestamp 2009/09/11 21:33 (1078)
[ 29.622521] eth0: no IPv6 routers present
[ 90.978682] [UFW BLOCK] IN=eth0 OUT= MAC=00:18:f3:80:eb:4a:00:24:b2:3f:ed:c8:08:00 SRC=192.168.0.1 DST=192.168.0.2 LEN=260 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=44883 LEN=240
[ 90.979397] [UFW BLOCK] IN=eth0 OUT= MAC=00:18:f3:80:eb:4a:00:24:b2:3f:ed:c8:08:00 SRC=192.168.0.1 DST=192.168.0.2 LEN=260 TOS=0x00 PREC=0x00 TTL=64 ID=1 DF PROTO=UDP SPT=1900 DPT=1900 LEN=240
[ 90.979948] [UFW BLOCK] IN=eth0 OUT= MAC=00:18:f3:80:eb:4a:00:24:b2:3f:ed:c8:08:00 SRC=192.168.0.1 DST=192.168.0.2 LEN=260 TOS=0x00 PREC=0x00 TTL=64 ID=2 DF PROTO=UDP SPT=1900 DPT=1900 LEN=240
[ 92.981523] [UFW BLOCK] IN=eth0 OUT= MAC=00:18:f3:80:eb:4a:00:24:b2:3f:ed:c8:08:00 SRC=192.168.0.1 DST=192.168.0.2 LEN=260 TOS=0x00 PREC=0x00 TTL=64 ID=3 DF PROTO=UDP SPT=1900 DPT=44883 LEN=240
[ 92.982054] [UFW BLOCK] IN=eth0 OUT= MAC=00:18:f3:80:eb:4a:00:24:b2:3f:ed:c8:08:00 SRC=192.168.0.1 DST=192.168.0.2 LEN=260 TOS=0x00 PREC=0x00 TTL=64 ID=4 DF PROTO=UDP SPT=1900 DPT=1900 LEN=240
[ 92.982585] [UFW BLOCK] IN=eth0 OUT= MAC=00:18:f3:80:eb:4a:00:24:b2:3f:ed:c8:08:00 SRC=192.168.0.1 DST=192.168.0.2 LEN=260 TOS=0x00 PREC=0x00 TTL=64 ID=5 DF PROTO=UDP SPT=1900 DPT=1900 LEN=240
[ 140.620920] [UFW BLOCK] IN=eth0 OUT= MAC=00:18:f3:80:eb:4a:00:24:b2:3f:ed:c8:08:00 SRC=178.162.33.128 DST=192.168.0.2 LEN=131 TOS=0x00 PREC=0x00 TTL=114 ID=17076 PROTO=UDP SPT=31522 DPT=57869 LEN=111

Κώδικας: Επιλογή όλων

Opera Plugins

Κώδικας: Επιλογή όλων

Description: Shockwave Flash 10.2 r152

Κώδικας: Επιλογή όλων

Firefox Plugins

Κώδικας: Επιλογή όλων

Description: Shockwave Flash 10.2 r152

[Manny]

Άλλη μία παρατήρηση: Όταν δεν έχω ήχο στους explorers το καταλαβαίνω, γιατί δεν παίζει ο ήχος εκκίνησης του λειτουργικού.. =/