Πρόβλημα δικτύου(?) σε αδράνεια μικρότερη από λεπτό

[mourj]

Καλησπέρα σας,

Είμαι καινούριος στον χώρο του linux και στο forum. Εγκατέστησα μόλις το Ubuntu 9.10 σύμφωνα με τον πολύ καλό οδηγό vagrale13 αλλά έχω ένα προβληματάκι.

Μετά την εγκατάσταση και κατά την διάρκεια εύρεσης του κοντινότερου server και αργότερα στην αναβάθμιση όταν δεν κουνάω με το touchpad τον δείκτη σαν να κόβεται το δίκτυο, η πρόοδος, η ταχύτητα και ο υπολειπόμενος χρόνος είναι κολλημένος καθώς και το λαμπάκι του lan στο router σταματάει να αναβοσβήνει.

*Edit* το υπόλοιπο δίκτυο στον άλλον υπολογιστή είναι οκ.

π.χ. τώρα έχει κολλήσει 223kb/s 17s απομένουν / κουνάω ελάχιστα τον δείκτη όλα φυσιολογικά με την ταχύτητα να ξεκινάει από το μηδέν (5553Bytes/s) υπολειπόμενος χρόνος 17 λεπτά + για ελάχιστα δευτερόλεπτα βέβαια μέχρι να ξαναπάρει τα πάνω του.

Δηλαδή αν το αφήσω για περίπου 1 λεπτό και λιγότερο σε αδράνεια σταματάει να έχει επαφή με το δίκτυο...

Φιλικά Γιάννης

[vagrale13]

Γεια σου φιλε μου και καλως μας ηρθες καταρχας!!
Διαβασε πρωτα εδω Oδηγίες προς νεοεισερχόμενους σε forum ή linux
και φτιαξε και την υπογραφη σου, για να ειναι πιο ευκολο να σε βοηθησει καποιος οταν χρειαστει!!

Δωσε μας και τα αποτελεσματα απο

Κώδικας: Επιλογή όλων

lspci -nn
ifconfig
iwconfig

Επισης αν καταλαβα καλα, το προβλημα ειναι, οτι χανεται η συνδεση σου στο internet,
και εχεις συνδεση με ασυρματο, σωστα?

Το θεμα σου μετακινηθηκε στην κατηγορια : Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet

[mourj]

Ευχαριστώ για τον χρόνο σου.
Κατ' αρχήν να πω ότι δεν το δημοσίευσα εδώ γιατί δεν μου φάνηκε σαν πρόβλημα δικτύου.
Κατά δεύτερον όχι με ασύρματο, με ethernet ανέφερα και το λαμπάκι του lan.

Μέχρι να φτιάξω την υπογραφή να αναφέρω τα εξής:

Access-Point: Siemens sl2-141
Κύριος υπολογιστής: Windows xp home edition κάρτα δικτύου Realtek static ip στο δίκτυο. (Από αυτό γράφω)
Δευτερεύον: Το netbook που μόλις έβαλα το Ubuntu και το pc της αδερφής μου σε άλλο όροφο με ασύρματο με Windows 7

Επίσης δεν μπορώ να αλλάξω την γλώσσα είτε γιατί δεν αλλάζει, είτε γιατί είμαι χαζός και δεν αλλάζει με alt+shift στο linux.

Οπότε δημοσιεύω και κάνω edit με τα αποτελέσματα από τις εντολές από το netbook.

lspci -nn

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)

ifconfig

Κώδικας: Επιλογή όλων

eth0 Link encap:Ethernet HWaddr 00:03:0d:a3:78:ed
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::203:dff:fea3:78ed/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3160 errors:0 dropped:0 overruns:0 frame:0
TX packets:2861 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3865289 (3.8 MB) TX bytes:409388 (409.3 KB)
Interrupt:25 Base address:0x6000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)


iwconfig

Κώδικας: Επιλογή όλων

lo no wireless extensions.

eth0 no wireless extensions.


[mourj]

Λυπηθείτε με, κάθε φορά που κάνω κάποιο update ή θέλω να κατεβάσω ένα σχετικά μεγάλο αρχείο αν παίρνει πάνω από ένα λεπτό κάθομαι και χαϊδεύω το touchpad

[vagrale13]

Δωσε και τα αποτελεσματα απο

Κώδικας: Επιλογή όλων

lsusb
dmesg

[mourj]

lsusb:

Κώδικας: Επιλογή όλων

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 001 Device 002: ID 0ac8:c312 Z-Star Microelectronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


dmesg: Εμφάνισε πάρα πολλά αποτελέσματα και φαινόταν ότι όταν έφτασα πάνω πάνω ότι έπρεπε να είχε κι άλλα

Κώδικας: Επιλογή όλων

[ 2.056034] alloc kstat_irqs on node -1
[ 2.056053] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.056130] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.056296] scsi0 : ata_piix
[ 2.056512] scsi1 : ata_piix
[ 2.059352] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.059360] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.059569] ata2: port disabled. ignoring.
[ 2.061304] Fixed MDIO Bus: probed
[ 2.061391] PPP generic driver version 2.4.2
[ 2.061603] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.061649] alloc irq_desc for 23 on node -1
[ 2.061655] alloc kstat_irqs on node -1
[ 2.061667] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.061697] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.061705] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.061773] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.061783] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.065705] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.065717] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.065746] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea37c00
[ 2.080038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.080199] usb usb1: configuration #1 chosen from 1 choice
[ 2.080269] hub 1-0:1.0: USB hub found
[ 2.080287] hub 1-0:1.0: 8 ports detected
[ 2.080413] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.080455] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.080530] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.080544] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.080551] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.080624] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.080662] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[ 2.080838] usb usb2: configuration #1 chosen from 1 choice
[ 2.080900] hub 2-0:1.0: USB hub found
[ 2.080914] hub 2-0:1.0: 2 ports detected
[ 2.081022] alloc irq_desc for 19 on node -1
[ 2.081027] alloc kstat_irqs on node -1
[ 2.081039] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.081053] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.081060] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.081136] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.081184] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[ 2.081367] usb usb3: configuration #1 chosen from 1 choice
[ 2.081426] hub 3-0:1.0: USB hub found
[ 2.081455] hub 3-0:1.0: 2 ports detected
[ 2.081543] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.081559] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.081566] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.081629] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.081675] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 2.081843] usb usb4: configuration #1 chosen from 1 choice
[ 2.081902] hub 4-0:1.0: USB hub found
[ 2.081916] hub 4-0:1.0: 2 ports detected
[ 2.082000] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.082012] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.082019] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.082086] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.082132] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
[ 2.082296] usb usb5: configuration #1 chosen from 1 choice
[ 2.082356] hub 5-0:1.0: USB hub found
[ 2.082370] hub 5-0:1.0: 2 ports detected
[ 2.082563] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.088093] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 2.088968] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.088981] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.088989] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.088995] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.089004] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.089196] mice: PS/2 mouse device common for all mice
[ 2.089521] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.089563] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.089818] device-mapper: uevent: version 1.0.3
[ 2.090100] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.090293] device-mapper: multipath: version 1.1.0 loaded
[ 2.090302] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.090599] EISA: Probing bus 0 at eisa.0
[ 2.090641] EISA: Detected 0 cards.
[ 2.091038] cpuidle: using governor ladder
[ 2.091294] cpuidle: using governor menu
[ 2.092465] TCP cubic registered
[ 2.092833] NET: Registered protocol family 10
[ 2.093793] lo: Disabled Privacy Extensions
[ 2.094492] NET: Registered protocol family 17
[ 2.094536] Bluetooth: L2CAP ver 2.13
[ 2.094540] Bluetooth: L2CAP socket layer initialized
[ 2.094546] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.094550] Bluetooth: SCO socket layer initialized
[ 2.094679] Bluetooth: RFCOMM TTY layer initialized
[ 2.094688] Bluetooth: RFCOMM socket layer initialized
[ 2.094692] Bluetooth: RFCOMM ver 1.11
[ 2.095721] Using IPI No-Shortcut mode
[ 2.095886] PM: Resume from disk failed.
[ 2.095911] registered taskstats version 1
[ 2.096155] Magic number: 10:58:686
[ 2.096270] rtc_cmos 00:03: setting system clock to 2010-01-21 13:40:15 UTC (1264081215)
[ 2.096280] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.096285] EDD information not available.
[ 2.097984] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.232763] ata1.00: ATA-7: SAMSUNG HS030GB, FY100-07, max UDMA/100
[ 2.232781] ata1.00: 58633344 sectors, multi 16: LBA
[ 2.240682] ata1.00: configured for UDMA/100
[ 2.488387] ACPI: Battery Slot [BAT1] (battery present)
[ 2.488858] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS030GB FY10 PQ: 0 ANSI: 5
[ 2.489187] sd 0:0:0:0: [sda] 58633344 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 2.489219] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.489352] sd 0:0:0:0: [sda] Write Protect is off
[ 2.489360] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.489431] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.489768] sda:
[ 2.500060] Clocksource tsc unstable (delta = -340533028 ns)
[ 2.663541] sda1 sda2 sda3 sda4 < sda5 >
[ 2.703908] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.703955] Freeing unused kernel memory: 540k freed
[ 2.704518] Write protecting the kernel text: 4580k
[ 2.704596] Write protecting the kernel read-only data: 1840k
[ 2.852117] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 3.148384] usb 1-6: configuration #1 chosen from 1 choice
[ 3.175499] Linux agpgart interface v0.103
[ 3.188503] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 3.188766] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 3.191752] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.205663] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.205712] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.205780] r8169 0000:01:00.0: setting latency timer to 64
[ 3.205851] alloc irq_desc for 25 on node -1
[ 3.205859] alloc kstat_irqs on node -1
[ 3.205886] r8169 0000:01:00.0: irq 25 for MSI/MSI-X
[ 3.207698] eth0: RTL8102e at 0xdfffa000, 00:03:0d:a3:78:ed, XID 34a00000 IRQ 25
[ 3.272130] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 3.309294] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input6
[ 3.309375] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[ 3.355322] [drm] Initialized drm 1.1.0 20060810
[ 3.385697] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.385708] i915 0000:00:02.0: setting latency timer to 64
[ 3.397208] i2c-adapter i2c-1: unable to read EDID block.
[ 3.397222] i915 0000:00:02.0: LVDS-1: no EDID data
[ 3.416603] i2c-adapter i2c-1: unable to read EDID block.
[ 3.416613] i915 0000:00:02.0: LVDS-1: no EDID data
[ 3.421834] [drm] fb0: inteldrmfb frame buffer device
[ 3.421853] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.553244] usb 1-7: configuration #1 chosen from 1 choice
[ 3.689062] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 3.832378] usb 1-8: configuration #1 chosen from 1 choice
[ 3.858840] Initializing USB Mass Storage driver...
[ 3.859121] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3.859324] usbcore: registered new interface driver usb-storage
[ 3.859331] USB Mass Storage support registered.
[ 3.859496] usb-storage: device found at 4
[ 3.859500] usb-storage: waiting for device to settle before scanning
[ 3.898641] [drm] LVDS-8: set mode 1024x600 d
[ 4.120107] Console: switching to colour frame buffer device 128x37
[ 4.829149] PM: Starting manual resume from disk
[ 4.829158] PM: Resume from partition 8:3
[ 4.829163] PM: Checking hibernation image.
[ 4.829513] PM: Resume from disk failed.
[ 4.855453] EXT4-fs (sda1): barriers enabled
[ 4.879215] kjournald2 starting: pid 371, dev sda1:8, commit interval 5 seconds
[ 4.879430] EXT4-fs (sda1): delayed allocation enabled
[ 4.879439] EXT4-fs: file extents enabled
[ 4.880808] EXT4-fs: mballoc enabled
[ 4.880840] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.052943] type=1505 audit(1264081219.455:2): operation="profile_load" pid=396 name=/usr/share/gdm/guest-session/Xsession
[ 6.058215] type=1505 audit(1264081219.459:3): operation="profile_load" pid=397 name=/sbin/dhclient3
[ 6.058822] type=1505 audit(1264081219.459:4): operation="profile_load" pid=397 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.059161] type=1505 audit(1264081219.459:5): operation="profile_load" pid=397 name=/usr/lib/connman/scripts/dhclient-script
[ 6.137919] type=1505 audit(1264081219.539:6): operation="profile_load" pid=398 name=/usr/bin/evince
[ 6.147204] type=1505 audit(1264081219.547:7): operation="profile_load" pid=398 name=/usr/bin/evince-previewer
[ 6.152916] type=1505 audit(1264081219.555:8): operation="profile_load" pid=398 name=/usr/bin/evince-thumbnailer
[ 6.185033] type=1505 audit(1264081219.587:9): operation="profile_load" pid=400 name=/usr/lib/cups/backend/cups-pdf
[ 6.185801] type=1505 audit(1264081219.587:10): operation="profile_load" pid=400 name=/usr/sbin/cupsd
[ 6.201480] type=1505 audit(1264081219.603:11): operation="profile_load" pid=401 name=/usr/sbin/tcpdump
[ 7.808094] Adding 2931852k swap on /dev/sda3. Priority:-1 extents:1 across:2931852k
[ 8.698828] EXT4-fs (sda1): internal journal on sda1:8
[ 8.857653] usb-storage: device scan complete
[ 8.859923] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 8.861078] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 8.865551] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 9.564508] udev: starting version 147
[ 9.915714] EXT4-fs (sda2): barriers enabled
[ 9.929816] kjournald2 starting: pid 477, dev sda2:8, commit interval 5 seconds
[ 10.014963] EXT4-fs (sda2): internal journal on sda2:8
[ 10.014977] EXT4-fs (sda2): delayed allocation enabled
[ 10.014987] EXT4-fs: file extents enabled
[ 10.017401] EXT4-fs: mballoc enabled
[ 10.017455] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 12.215333] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input7
[ 12.235932] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input8
[ 12.244949] lp: driver loaded but no devices found
[ 23.021246] usb 1-7: USB disconnect, address 3
[ 23.531431] intel_rng: FWH not detected
[ 23.865809] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.812293] kjournald starting. Commit interval 5 seconds
[ 27.946782] EXT3 FS on sda5, internal journal
[ 27.946806] EXT3-fs: mounted filesystem with writeback data mode.
[ 28.526663] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 28.526730] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 28.782827] hda_codec: Unknown model for ALC662 rev1, trying auto-probe from BIOS...
[ 28.783971] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 29.693301] Linux video capture interface: v2.00
[ 29.748615] uvcvideo: Found UVC 1.00 device Sirius USB2.0 Camera (0ac8:c312)
[ 29.752881] input: Sirius USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10
[ 29.753042] usbcore: registered new interface driver uvcvideo
[ 29.753053] USB Video Class driver (v0.1.0)
[ 30.264760] r8169: eth0: link down
[ 30.264903] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.369378] cfg80211: Calling CRDA to update world regulatory domain
[ 31.827437] cfg80211: World regulatory domain updated:
[ 31.827446] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 31.827454] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.827461] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 31.827467] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 31.827474] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.827480] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.157286] usbcore: registered new interface driver rt73usb
[ 32.507599] type=1505 audit(1264081245.907:12): operation="profile_replace" pid=986 name=/usr/share/gdm/guest-session/Xsession
[ 32.511247] type=1505 audit(1264081245.911:13): operation="profile_replace" pid=987 name=/sbin/dhclient3
[ 32.511842] type=1505 audit(1264081245.911:14): operation="profile_replace" pid=987 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 32.512213] type=1505 audit(1264081245.915:15): operation="profile_replace" pid=987 name=/usr/lib/connman/scripts/dhclient-script
[ 32.521560] type=1505 audit(1264081245.923:16): operation="profile_replace" pid=988 name=/usr/bin/evince
[ 32.531093] type=1505 audit(1264081245.931:17): operation="profile_replace" pid=988 name=/usr/bin/evince-previewer
[ 32.537131] type=1505 audit(1264081245.939:18): operation="profile_replace" pid=988 name=/usr/bin/evince-thumbnailer
[ 32.548639] type=1505 audit(1264081245.951:19): operation="profile_replace" pid=990 name=/usr/lib/cups/backend/cups-pdf
[ 32.549581] type=1505 audit(1264081245.951:20): operation="profile_replace" pid=990 name=/usr/sbin/cupsd
[ 32.553710] type=1505 audit(1264081245.955:21): operation="profile_replace" pid=991 name=/usr/sbin/tcpdump
[ 34.854372] i2c-adapter i2c-1: unable to read EDID block.
[ 34.854387] i915 0000:00:02.0: LVDS-1: no EDID data
[ 34.932184] i2c-adapter i2c-1: unable to read EDID block.
[ 34.932194] i915 0000:00:02.0: LVDS-1: no EDID data
[ 38.149063] ppdev: user-space parallel port driver
[ 40.457181] CPU0 attaching NULL sched-domain.
[ 40.457192] CPU1 attaching NULL sched-domain.
[ 40.476227] CPU0 attaching sched-domain:
[ 40.476243] domain 0: span 0-1 level SIBLING
[ 40.476256] groups: 0 1
[ 40.476276] domain 1: span 0-1 level MC
[ 40.476287] groups: 0-1 (__cpu_power = 2048)
[ 40.476308] CPU1 attaching sched-domain:
[ 40.476318] domain 0: span 0-1 level SIBLING
[ 40.476329] groups: 1 0
[ 40.476351] domain 1: span 0-1 level MC
[ 40.476356] groups: 0-1 (__cpu_power = 2048)
[ 46.249887] CPU0 attaching NULL sched-domain.
[ 46.249901] CPU1 attaching NULL sched-domain.
[ 46.265267] CPU0 attaching sched-domain:
[ 46.265285] domain 0: span 0-1 level SIBLING
[ 46.265298] groups: 0 1
[ 46.265317] domain 1: span 0-1 level MC
[ 46.265328] groups: 0-1 (__cpu_power = 2048)
[ 46.265354] CPU1 attaching sched-domain:
[ 46.265359] domain 0: span 0-1 level SIBLING
[ 46.265364] groups: 1 0
[ 46.265372] domain 1: span 0-1 level MC
[ 46.265377] groups: 0-1 (__cpu_power = 2048)
[ 47.649583] i2c-adapter i2c-1: unable to read EDID block.
[ 47.649594] i915 0000:00:02.0: LVDS-1: no EDID data
[ 47.688702] i2c-adapter i2c-1: unable to read EDID block.
[ 47.688712] i915 0000:00:02.0: LVDS-1: no EDID data
[ 47.769691] i2c-adapter i2c-1: unable to read EDID block.
[ 47.769703] i915 0000:00:02.0: LVDS-1: no EDID data
[ 52.837711] i2c-adapter i2c-1: unable to read EDID block.
[ 52.837721] i915 0000:00:02.0: LVDS-1: no EDID data
[ 64.510950] CPU0 attaching NULL sched-domain.
[ 64.510973] CPU1 attaching NULL sched-domain.
[ 64.521363] CPU0 attaching sched-domain:
[ 64.521375] domain 0: span 0-1 level SIBLING
[ 64.521383] groups: 0 1
[ 64.521395] CPU1 attaching sched-domain:
[ 64.521400] domain 0: span 0-1 level SIBLING
[ 64.521405] groups: 1 0
[ 68.540595] CPU0 attaching NULL sched-domain.
[ 68.540609] CPU1 attaching NULL sched-domain.
[ 68.552171] CPU0 attaching sched-domain:
[ 68.552183] domain 0: span 0-1 level SIBLING
[ 68.552192] groups: 0 1
[ 68.552205] domain 1: span 0-1 level MC
[ 68.552213] groups: 0-1 (__cpu_power = 2048)
[ 68.552228] CPU1 attaching sched-domain:
[ 68.552235] domain 0: span 0-1 level SIBLING
[ 68.552242] groups: 1 0
[ 68.552254] domain 1: span 0-1 level MC
[ 68.552261] groups: 0-1 (__cpu_power = 2048)
[ 78.694708] CPU0 attaching NULL sched-domain.
[ 78.694721] CPU1 attaching NULL sched-domain.
[ 78.708260] CPU0 attaching sched-domain:
[ 78.708276] domain 0: span 0-1 level SIBLING
[ 78.708290] groups: 0 1
[ 78.708312] CPU1 attaching sched-domain:
[ 78.708322] domain 0: span 0-1 level SIBLING
[ 78.708333] groups: 1 0
[ 126.006829] CPU0 attaching NULL sched-domain.
[ 126.006845] CPU1 attaching NULL sched-domain.
[ 126.021179] CPU0 attaching sched-domain:
[ 126.021190] domain 0: span 0-1 level SIBLING
[ 126.021198] groups: 0 1
[ 126.021214] CPU1 attaching sched-domain:
[ 126.021220] domain 0: span 0-1 level SIBLING
[ 126.021228] groups: 1 0
[ 133.513046] PM: Syncing filesystems ... done.
[ 133.866042] PM: Preparing system for mem sleep
[ 133.866053] Freezing user space processes ... (elapsed 0.09 seconds) done.
[ 133.958842] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 133.959022] PM: Entering mem sleep
[ 133.959043] Suspending console(s) (use no_console_suspend to debug)
[ 133.988119] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 133.988497] sd 0:0:0:0: [sda] Stopping disk
[ 134.862033] ata2: port disabled. ignoring.
[ 134.862103] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 134.876132] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 134.876155] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 134.876173] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 134.876191] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 134.876208] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 134.876256] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 134.876333] ACPI handle has no context!
[ 134.912037] i915 0000:00:02.0: PCI INT A disabled
[ 134.928273] PM: suspend devices took 0.972 seconds
[ 134.928504] r8169 0000:01:00.0: PME# enabled
[ 134.928528] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[ 134.944188] ehci_hcd 0000:00:1d.7: PME# disabled
[ 134.960252] ACPI: Preparing to enter system sleep state S3
[ 134.960998] Disabling non-boot CPUs ...
[ 135.064034] CPU 1 is now offline
[ 135.064040] SMP alternatives: switching to UP code
[ 135.069403] CPU0 attaching NULL sched-domain.
[ 135.069410] CPU1 attaching NULL sched-domain.
[ 135.069423] CPU0 attaching NULL sched-domain.
[ 135.070109] CPU1 is down
[ 135.070129] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 135.070129] Back to C!
[ 135.070129] CPU0: Thermal monitoring enabled (TM1)
[ 135.070129] Enabling non-boot CPUs ...
[ 135.070129] SMP alternatives: switching to SMP code
[ 135.075653] Booting processor 1 APIC 0x1 ip 0x6000
[ 135.069157] Initializing CPU#1
[ 135.069157] Calibrating delay using timer specific routine.. 3191.96 BogoMIPS (lpj=6383932)
[ 135.069157] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 135.069157] CPU: L2 cache: 512K
[ 135.069157] CPU: Physical Processor ID: 0
[ 135.069157] CPU: Processor Core ID: 0
[ 135.069157] mce: CPU supports 5 MCE banks
[ 135.069157] CPU1: Thermal monitoring enabled (TM1)
[ 135.069157] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 135.165046] CPU1: Intel(R) Core(TM) CPU N270 @ 1.60GHz stepping 02
[ 135.165193] CPU0 attaching NULL sched-domain.
[ 135.169019] Switched to high resolution mode on CPU 1
[ 135.176035] CPU0 attaching sched-domain:
[ 135.176044] domain 0: span 0-1 level SIBLING
[ 135.176051] groups: 0 1
[ 135.176063] CPU1 attaching sched-domain:
[ 135.176069] domain 0: span 0-1 level SIBLING
[ 135.176075] groups: 1 0
[ 135.177039] CPU1 is up
[ 135.177046] ACPI: Waking up from system sleep state S3
[ 135.177947] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xfe980000)
[ 135.177961] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 135.178013] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[ 135.178026] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 135.178068] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a)
[ 135.178097] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[ 135.178111] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 135.178183] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 135.178228] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 135.178272] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 135.178315] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 135.178370] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 135.178398] ehci_hcd 0000:00:1d.7: PME# disabled
[ 135.178415] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
[ 135.178531] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 135.178618] r8169 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[ 135.178635] r8169 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebe0000)
[ 135.178654] r8169 0000:01:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfdfe000c)
[ 135.178669] r8169 0000:01:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfdfff00c)
[ 135.178684] r8169 0000:01:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xec01)
[ 135.178697] r8169 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[ 135.178712] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 136.019092] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 136.019101] i915 0000:00:02.0: setting latency timer to 64
[ 136.080316] [drm] LVDS-8: set mode 1024x600 d
[ 136.100400] pci 0000:00:02.1: PME# disabled
[ 136.100419] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 136.100430] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 136.100467] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 136.100477] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 136.100506] usb usb2: root hub lost power or was reset
[ 136.100531] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 136.100541] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 136.100567] usb usb3: root hub lost power or was reset
[ 136.100591] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 136.100600] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 136.100626] usb usb4: root hub lost power or was reset
[ 136.100650] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 136.100660] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 136.100686] usb usb5: root hub lost power or was reset
[ 136.100709] ehci_hcd 0000:00:1d.7: PME# disabled
[ 136.100718] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 136.100728] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 136.100748] pci 0000:00:1e.0: setting latency timer to 64
[ 136.100769] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 136.100780] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 136.100820] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[ 136.100831] r8169 0000:01:00.0: PME# disabled
[ 136.105083] ata2: port disabled. ignoring.
[ 136.233128] sd 0:0:0:0: [sda] Starting disk
[ 136.272538] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 136.272547] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 136.272712] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 136.284735] ata1.00: configured for UDMA/100
[ 136.300713] ata1.00: configured for UDMA/100
[ 136.300730] ata1: EH complete
[ 136.584150] usb 1-6: reset high speed USB device using ehci_hcd and address 2
[ 136.912165] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[ 137.052450] PM: resume devices took 1.876 seconds
[ 137.052509] PM: Finishing wakeup.
[ 137.052513] Restarting tasks ... done.
[ 139.867049] r8169: eth0: link down
[ 139.867291] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 142.313699] CPU0 attaching NULL sched-domain.
[ 142.313712] CPU1 attaching NULL sched-domain.
[ 142.336144] CPU0 attaching sched-domain:
[ 142.336157] domain 0: span 0-1 level SIBLING
[ 142.336165] groups: 0 1
[ 142.336177] domain 1: span 0-1 level MC
[ 142.336184] groups: 0-1 (__cpu_power = 2048)
[ 142.336201] CPU1 attaching sched-domain:
[ 142.336208] domain 0: span 0-1 level SIBLING
[ 142.336215] groups: 1 0
[ 142.336226] domain 1: span 0-1 level MC
[ 142.336233] groups: 0-1 (__cpu_power = 2048)
[ 142.993607] CPU0 attaching NULL sched-domain.
[ 142.993623] CPU1 attaching NULL sched-domain.
[ 143.008210] CPU0 attaching sched-domain:
[ 143.008222] domain 0: span 0-1 level SIBLING
[ 143.008231] groups: 0 1
[ 143.008244] domain 1: span 0-1 level MC
[ 143.008252] groups: 0-1 (__cpu_power = 2048)
[ 143.008269] CPU1 attaching sched-domain:
[ 143.008276] domain 0: span 0-1 level SIBLING
[ 143.008284] groups: 1 0
[ 143.008296] domain 1: span 0-1 level MC
[ 143.008304] groups: 0-1 (__cpu_power = 2048)
[ 158.582947] r8169: eth0: link up
[ 158.583149] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 169.192074] eth0: no IPv6 routers present


[vagrale13]

Δωσε και τα αποτελεσματα απο

Κώδικας: Επιλογή όλων

lsmod
sudo iwlist scan
rfkill list

[mourj]

Αναλαμπή, είμαι στην δουλειά και εδώ έχει router netfaster στο οποίο δεν μου παρουσίασε και πρόβλημα... Κάπου μέσα στο forum είχα διαβάσει για ασυμβατότητα κάποιον router με το linux. Ισχύει κάτι τέτοιο? Τελοσπάντων αποτελέσματα εντολών που ζήτησες.

lsmod:

Κώδικας: Επιλογή όλων

Module Size Used by
aes_i586 8124 1
aes_generic 27484 1 aes_i586
arc4 1660 2
ecb 2524 2
binfmt_misc 8356 1
ppdev 6688 0
rt73usb 26336 0
crc_itu_t 1852 1 rt73usb
rt2x00usb 11548 1 rt73usb
rt2x00lib 29756 2 rt73usb,rt2x00usb
led_class 4096 1 rt2x00lib
input_polldev 3716 1 rt2x00lib
mac80211 181140 2 rt2x00usb,rt2x00lib
cfg80211 93052 2 rt2x00lib,mac80211
uvcvideo 59080 0
videodev 36736 1 uvcvideo
v4l1_compat 14336 2 uvcvideo,videodev
snd_hda_codec_realtek 203328 1
snd_hda_intel 26920 2
snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7200 1 snd_hda_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6464 0
snd_rawmidi 22176 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 59204 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7264 1 snd
snd_page_alloc 9156 2 snd_hda_intel,snd_pcm
iptable_filter 3100 0
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
joydev 10240 0
psmouse 56500 0
lp 8964 0
parport 35340 2 ppdev,lp
serio_raw 5280 0
usb_storage 52768 0
fbcon 36640 72
tileblit 2460 1 fbcon
font 8124 1 fbcon
bitblit 5372 1 fbcon
softcursor 1756 1 bitblit
i915 226120 3
drm 160032 3 i915
i2c_algo_bit 5760 1 i915
r8169 32064 0
mii 5212 1 r8169
intel_agp 27676 2 i915
agpgart 34988 2 drm,intel_agp
video 19380 1 i915
output 2780 1 video


sudo iwlist scan: (ΣΗΜ. Συνδέομαι από την δουλειά over netfaster με ασύρματο ενώ από το σπίτι μου με Siemens sl2-141 και ethernet)

Κώδικας: Επιλογή όλων

lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wmaster0 Interface doesn't support scanning.

wlan0 Scan completed :
Cell 01 - Address: 00:05:59:05:EE:83
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=70/70 Signal level=-32 dBm
Encryption key:on
ESSID:"NetFasteR IAD (PSTN)"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000029612a85e11
Extra: Last beacon: 1048ms ago
IE: Unknown: 00144E65744661737465522049414420285053544E29
IE: Unknown: 010582848B962C
IE: Unknown: 030106
IE: Unknown: 2A0100
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Preauthentication Supported
IE: Unknown: 32080C1218243048606C
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK


rfkill list

Κώδικας: Επιλογή όλων

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no