προβλημα με wireless...

[Giant]

χαιρετω την κοινοτητα....να σας ρωτησω ..ενας φιλος εχει βαλει τα mint8 helena κ δεν μπορει να συνδεθει ασυρματα...δεν εχει το εικονιδιο NetworkManager αλλα ειναι εγκατεστημενο...καμια ιδεα παιδες????

[logari81]

Κώδικας: Επιλογή όλων

lsusb
dmesg
iwconfig

και δωσε μας τα αποτελέσματα.

[Giant]

Κώδικας: Επιλογή όλων

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 04f2:b015 Chicony Electronics Co., Ltd VGA 24fps UVC Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Κώδικας: Επιλογή όλων

[ 0.003769] ... counter mask: 000000000000000f
[ 0.003774] Checking 'hlt' instruction... OK.
[ 0.018047] ACPI: Core revision 20090521
[ 0.028530] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070765] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4000.38 BogoMIPS (lpj=8000765)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 5 MCE banks
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.156447] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01
[ 0.156473] Brought up 2 CPUs
[ 0.156476] Total of 2 processors activated (8000.37 BogoMIPS).
[ 0.156472] System has AMD C1E enabled
[ 0.156472] Switch to broadcast mode on CPU1
[ 0.156568] CPU0 attaching sched-domain:
[ 0.156571] domain 0: span 0-1 level MC
[ 0.156574] groups: 0 1
[ 0.156580] CPU1 attaching sched-domain:
[ 0.156582] domain 0: span 0-1 level MC
[ 0.156585] groups: 1 0
[ 0.156656] Switch to broadcast mode on CPU0
[ 0.156656] Booting paravirtualized kernel on bare hardware
[ 0.156656] regulator: core version 0.5
[ 0.156656] Time: 21:23:13 Date: 01/21/10
[ 0.156656] NET: Registered protocol family 16
[ 0.156656] EISA bus registered
[ 0.156656] ACPI: bus type pci registered
[ 0.156656] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
[ 0.156656] PCI: MCFG area at e0000000 reserved in E820
[ 0.156656] PCI: Using MMCONFIG for extended config space
[ 0.156656] PCI: Using configuration type 1 for base access
[ 0.157233] bio: create slab <bio-0> at 0
[ 0.157233] ACPI: EC: Enabling special treatment for EC from MSI.
[ 0.157233] ACPI: EC: Look up EC in DSDT
[ 0.161199] ACPI: BIOS _OSI(Linux) query ignored
[ 0.162033] ACPI: Interpreter enabled
[ 0.162038] ACPI: (supports S0 S3 S4 S5)
[ 0.162058] ACPI: Using IOAPIC for interrupt routing
[ 0.160021] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.171046] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.171048] ACPI: EC: driver started in interrupt mode
[ 0.171392] ACPI: No dock devices found.
[ 0.171604] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.171821] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf]
[ 0.171833] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f]
[ 0.171838] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f]
[ 0.171857] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.171863] pci 0000:00:01.1: PME# disabled
[ 0.171919] pci 0000:00:01.3: reg 10 32bit mmio: [0xf6200000-0xf627ffff]
[ 0.171999] pci 0000:00:02.0: reg 10 32bit mmio: [0xf6486000-0xf6486fff]
[ 0.172024] pci 0000:00:02.0: supports D1 D2
[ 0.172026] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172030] pci 0000:00:02.0: PME# disabled
[ 0.172053] pci 0000:00:02.1: reg 10 32bit mmio: [0xf6489000-0xf64890ff]
[ 0.172081] pci 0000:00:02.1: supports D1 D2
[ 0.172084] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172087] pci 0000:00:02.1: PME# disabled
[ 0.172114] pci 0000:00:04.0: reg 10 32bit mmio: [0xf6487000-0xf6487fff]
[ 0.172137] pci 0000:00:04.0: supports D1 D2
[ 0.172139] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172143] pci 0000:00:04.0: PME# disabled
[ 0.172166] pci 0000:00:04.1: reg 10 32bit mmio: [0xf6489400-0xf64894ff]
[ 0.172194] pci 0000:00:04.1: supports D1 D2
[ 0.172196] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172200] pci 0000:00:04.1: PME# disabled
[ 0.172234] pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf]
[ 0.172272] pci 0000:00:07.0: reg 10 32bit mmio: [0xf6480000-0xf6483fff]
[ 0.172300] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.172304] pci 0000:00:07.0: PME# disabled
[ 0.172365] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7]
[ 0.172369] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7]
[ 0.172373] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef]
[ 0.172378] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3]
[ 0.172382] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df]
[ 0.172387] pci 0000:00:09.0: reg 24 32bit mmio: [0xf6484000-0xf6485fff]
[ 0.172434] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf6488000-0xf6488fff]
[ 0.172439] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff]
[ 0.172443] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf6489c00-0xf6489cff]
[ 0.172448] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf6489800-0xf648980f]
[ 0.172469] pci 0000:00:0a.0: supports D1 D2
[ 0.172472] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172476] pci 0000:00:0a.0: PME# disabled
[ 0.172513] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172516] pci 0000:00:0c.0: PME# disabled
[ 0.172550] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172553] pci 0000:00:0d.0: PME# disabled
[ 0.172577] pci 0000:00:12.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
[ 0.172583] pci 0000:00:12.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.172589] pci 0000:00:12.0: reg 1c 64bit mmio: [0xf4000000-0xf4ffffff]
[ 0.172594] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.172706] pci 0000:02:05.0: reg 10 32bit mmio: [0xf6100000-0xf61007ff]
[ 0.172739] pci 0000:02:05.0: supports D1 D2
[ 0.172742] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172745] pci 0000:02:05.0: PME# disabled
[ 0.172770] pci 0000:02:05.1: reg 10 32bit mmio: [0xf6100800-0xf61008ff]
[ 0.172803] pci 0000:02:05.1: supports D1 D2
[ 0.172806] pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172809] pci 0000:02:05.1: PME# disabled
[ 0.172834] pci 0000:02:05.2: reg 10 32bit mmio: [0xf6100c00-0xf6100cff]
[ 0.172867] pci 0000:02:05.2: supports D1 D2
[ 0.172870] pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172873] pci 0000:02:05.2: PME# disabled
[ 0.172898] pci 0000:02:05.3: reg 10 32bit mmio: [0xf6101000-0xf61010ff]
[ 0.172931] pci 0000:02:05.3: supports D1 D2
[ 0.172934] pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172938] pci 0000:02:05.3: PME# disabled
[ 0.172963] pci 0000:02:05.4: reg 10 32bit mmio: [0xf6101400-0xf61014ff]
[ 0.172996] pci 0000:02:05.4: supports D1 D2
[ 0.172999] pci 0000:02:05.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.173003] pci 0000:02:05.4: PME# disabled
[ 0.173035] pci 0000:00:08.0: transparent bridge
[ 0.173040] pci 0000:00:08.0: bridge 32bit mmio: [0xf6100000-0xf61fffff]
[ 0.173078] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff]
[ 0.173081] pci 0000:00:0c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
[ 0.173086] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.173126] pci 0000:03:00.0: reg 10 64bit mmio: [0xf6000000-0xf6003fff]
[ 0.173172] pci 0000:03:00.0: supports D1 D2
[ 0.173222] pci 0000:00:0d.0: bridge 32bit mmio: [0xf6000000-0xf60fffff]
[ 0.173231] pci_bus 0000:00: on NUMA node 0
[ 0.173236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.173335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.173358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.173393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.202009] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
[ 0.202191] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
[ 0.202370] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[ 0.202554] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 0.202733] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[ 0.202913] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.203093] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 0.203273] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
[ 0.203452] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[ 0.203631] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[ 0.203810] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
[ 0.203994] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 0.204176] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
[ 0.204356] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
[ 0.204535] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[ 0.204716] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
[ 0.204895] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5
[ 0.205078] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10
[ 0.205262] ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
[ 0.205453] SCSI subsystem initialized
[ 0.208019] libata version 3.00 loaded.
[ 0.208052] usbcore: registered new interface driver usbfs
[ 0.208052] usbcore: registered new interface driver hub
[ 0.208055] usbcore: registered new device driver usb
[ 0.208072] ACPI: WMI: Mapper loaded
[ 0.208074] PCI: Using ACPI for IRQ routing
[ 0.216009] Bluetooth: Core ver 2.15
[ 0.220013] NET: Registered protocol family 31
[ 0.220015] Bluetooth: HCI device and connection manager initialized
[ 0.220018] Bluetooth: HCI socket layer initialized
[ 0.220020] NetLabel: Initializing
[ 0.220022] NetLabel: domain hash size = 128
[ 0.220024] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.220037] NetLabel: unlabeled traffic allowed by default
[ 0.220070] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.220076] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.232021] Switched to high resolution mode on CPU 0
[ 0.232037] Switched to high resolution mode on CPU 1
[ 0.237028] pnp: PnP ACPI init
[ 0.237046] ACPI: bus type pnp registered
[ 0.242687] pnp: PnP ACPI: found 12 devices
[ 0.242690] ACPI: ACPI bus type pnp unregistered
[ 0.242693] PnPBIOS: Disabled by ACPI PNP
[ 0.242705] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.242712] system 00:03: ioport range 0x1000-0x107f has been reserved
[ 0.242715] system 00:03: ioport range 0x1080-0x10ff has been reserved
[ 0.242719] system 00:03: ioport range 0x1400-0x147f has been reserved
[ 0.242722] system 00:03: ioport range 0x1480-0x14ff has been reserved
[ 0.242725] system 00:03: ioport range 0x1800-0x187f has been reserved
[ 0.242728] system 00:03: ioport range 0x1880-0x18ff has been reserved
[ 0.242734] system 00:04: ioport range 0x360-0x361 has been reserved
[ 0.242738] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.242746] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.242750] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.242754] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.242757] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.242761] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
[ 0.277418] AppArmor: AppArmor Filesystem Enabled
[ 0.277455] pci 0000:00:08.0: PCI bridge, secondary bus 0000:02
[ 0.277458] pci 0000:00:08.0: IO window: disabled
[ 0.277462] pci 0000:00:08.0: MEM window: 0xf6100000-0xf61fffff
[ 0.277466] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.277469] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.277472] pci 0000:00:0c.0: IO window: 0x4000-0x4fff
[ 0.277476] pci 0000:00:0c.0: MEM window: 0xf2000000-0xf3ffffff
[ 0.277480] pci 0000:00:0c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.277484] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
[ 0.277487] pci 0000:00:0d.0: IO window: disabled
[ 0.277490] pci 0000:00:0d.0: MEM window: 0xf6000000-0xf60fffff
[ 0.277493] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.277501] pci 0000:00:08.0: setting latency timer to 64
[ 0.277507] pci 0000:00:0c.0: setting latency timer to 64
[ 0.277511] pci 0000:00:0d.0: setting latency timer to 64
[ 0.277516] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.277519] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.277522] pci_bus 0000:02: resource 1 mem: [0xf6100000-0xf61fffff]
[ 0.277525] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.277528] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.277531] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
[ 0.277534] pci_bus 0000:04: resource 1 mem: [0xf2000000-0xf3ffffff]
[ 0.277537] pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 0.277540] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf60fffff]
[ 0.277578] NET: Registered protocol family 2
[ 0.277674] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.278014] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.278655] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.278992] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.278995] TCP reno registered
[ 0.279084] NET: Registered protocol family 1
[ 0.279150] Trying to unpack rootfs image as initramfs...
[ 0.502122] Freeing initrd memory: 8024k freed
[ 0.506992] Simple Boot Flag at 0x36 set to 0x1
[ 0.507177] cpufreq-nforce2: No nForce2 chipset.
[ 0.507204] Scanning for low memory corruption every 60 seconds
[ 0.507302] audit: initializing netlink socket (disabled)
[ 0.507316] type=2000 audit(1264108992.505:1): initialized
[ 0.516530] highmem bounce pool size: 64 pages
[ 0.516535] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.517998] VFS: Disk quotas dquot_6.5.2
[ 0.518062] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.518643] fuse init (API version 7.12)
[ 0.518726] msgmni has been set to 1675
[ 0.518996] alg: No test for stdrng (krng)
[ 0.519010] io scheduler noop registered
[ 0.519013] io scheduler anticipatory registered
[ 0.519015] io scheduler deadline registered
[ 0.519062] io scheduler cfq registered (default)
[ 0.519205] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.519258] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.519316] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.519381] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.519449] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.519522] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.519528] pci 0000:00:12.0: Boot video device
[ 0.519642] alloc irq_desc for 24 on node -1
[ 0.519645] alloc kstat_irqs on node -1
[ 0.519653] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X
[ 0.519659] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 0.519729] alloc irq_desc for 25 on node -1
[ 0.519731] alloc kstat_irqs on node -1
[ 0.519736] pcieport-driver 0000:00:0d.0: irq 25 for MSI/MSI-X
[ 0.519740] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 0.519797] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.519821] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.523239] ACPI: AC Adapter [ACAD] (off-line)
[ 0.523315] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.523319] ACPI: Power Button [PWRF]
[ 0.523369] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.523372] ACPI: Sleep Button [SLPB]
[ 0.523417] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.525689] ACPI: Lid Switch [LID]
[ 0.525748] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.525751] ACPI: Power Button [PWRB]
[ 0.526079] ACPI: processor limited to max C-state 1
[ 0.526114] processor LNXCPU:00: registered as cooling_device0
[ 0.526119] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.526193] processor LNXCPU:01: registered as cooling_device1
[ 0.526198] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.533993] ACPI Exception: AE_OK, No or invalid critical threshold 20090521 thermal-384
[ 0.534056] isapnp: Scanning for PnP cards...
[ 0.838512] ACPI: Battery Slot [BAT0] (battery present)
[ 0.886762] isapnp: No Plug & Play device found
[ 0.887987] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.889223] brd: module loaded
[ 0.889680] loop: module loaded
[ 0.889755] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.889830] ahci 0000:00:09.0: version 3.0
[ 0.890138] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[ 0.890143] alloc irq_desc for 23 on node -1
[ 0.890145] alloc kstat_irqs on node -1
[ 0.890156] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[ 0.890184] alloc irq_desc for 26 on node -1
[ 0.890186] alloc kstat_irqs on node -1
[ 0.890193] ahci 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.890199] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
[ 0.890260] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 0.890263] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part
[ 0.890267] ahci 0000:00:09.0: setting latency timer to 64
[ 0.890680] scsi0 : ahci
[ 0.890796] scsi1 : ahci
[ 0.890865] scsi2 : ahci
[ 0.890936] scsi3 : ahci
[ 0.891043] ata1: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 26
[ 0.891046] ata2: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 26
[ 0.891050] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 26
[ 0.891053] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 26
[ 0.891295] pata_amd 0000:00:06.0: version 0.4.1
[ 0.891336] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.891412] scsi4 : pata_amd
[ 0.891476] scsi5 : pata_amd
[ 0.891792] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 0.891795] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 0.892580] Fixed MDIO Bus: probed
[ 0.892618] PPP generic driver version 2.4.2
[ 0.892721] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.893034] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 0.893037] alloc irq_desc for 22 on node -1
[ 0.893040] alloc kstat_irqs on node -1
[ 0.893048] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 0.893063] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.893066] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.893119] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.893146] ehci_hcd 0000:00:02.1: debug port 1
[ 0.893150] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.893167] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
[ 0.904028] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.904110] usb usb1: configuration #1 chosen from 1 choice
[ 0.904144] hub 1-0:1.0: USB hub found
[ 0.904153] hub 1-0:1.0: 7 ports detected
[ 0.904480] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
[ 0.904484] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22
[ 0.904492] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.904495] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.904528] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.904551] ehci_hcd 0000:00:04.1: debug port 1
[ 0.904555] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.904561] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
[ 0.916028] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.916097] usb usb2: configuration #1 chosen from 1 choice
[ 0.916126] hub 2-0:1.0: USB hub found
[ 0.916132] hub 2-0:1.0: 2 ports detected
[ 0.916182] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.916463] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[ 0.916466] alloc irq_desc for 18 on node -1
[ 0.916468] alloc kstat_irqs on node -1
[ 0.916477] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
[ 0.916485] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.916487] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.916522] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.916545] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
[ 0.974074] usb usb3: configuration #1 chosen from 1 choice
[ 0.974102] hub 3-0:1.0: USB hub found
[ 0.974111] hub 3-0:1.0: 7 ports detected
[ 0.974427] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18
[ 0.974431] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18
[ 0.974438] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.974441] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.974471] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.974483] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
[ 1.030088] usb usb4: configuration #1 chosen from 1 choice
[ 1.030114] hub 4-0:1.0: USB hub found
[ 1.030123] hub 4-0:1.0: 2 ports detected
[ 1.030173] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.030259] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.053792] ata5.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2
[ 1.053817] ata5: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[ 1.057655] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.057662] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.057734] mice: PS/2 mouse device common for all mice
[ 1.057869] rtc_cmos 00:07: RTC can wake from S4
[ 1.057906] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.057948] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.058052] device-mapper: uevent: version 1.0.3
[ 1.058157] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.058219] device-mapper: multipath: version 1.1.0 loaded
[ 1.058222] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.058350] EISA: Probing bus 0 at eisa.0
[ 1.058355] Cannot allocate resource for EISA slot 1
[ 1.058360] Cannot allocate resource for EISA slot 3
[ 1.058363] Cannot allocate resource for EISA slot 4
[ 1.058375] EISA: Detected 0 cards.
[ 1.058446] cpuidle: using governor ladder
[ 1.058448] cpuidle: using governor menu
[ 1.058944] TCP cubic registered
[ 1.059112] NET: Registered protocol family 10
[ 1.059559] lo: Disabled Privacy Extensions
[ 1.059877] NET: Registered protocol family 17
[ 1.059894] Bluetooth: L2CAP ver 2.13
[ 1.059896] Bluetooth: L2CAP socket layer initialized
[ 1.059899] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.059901] Bluetooth: SCO socket layer initialized
[ 1.059926] Bluetooth: RFCOMM TTY layer initialized
[ 1.059929] Bluetooth: RFCOMM socket layer initialized
[ 1.059931] Bluetooth: RFCOMM ver 1.11
[ 1.059949] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
[ 1.059991] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13
[ 1.059993] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14
[ 1.059996] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x15
[ 1.059998] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 1.060069] Using IPI No-Shortcut mode
[ 1.060152] PM: Resume from disk failed.
[ 1.060165] registered taskstats version 1
[ 1.060312] Magic number: 10:597:399
[ 1.060417] rtc_cmos 00:07: setting system clock to 2010-01-21 21:23:14 UTC (1264108994)
[ 1.060420] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.060422] EDD information not available.
[ 1.072260] ata5.00: configured for MWDMA2
[ 1.078515] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.208033] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.208050] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.208065] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.228031] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 1.373771] usb 2-2: configuration #1 chosen from 1 choice
[ 1.596032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.596776] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7BP, max UDMA/100
[ 1.596779] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.597719] ata1.00: configured for UDMA/100
[ 1.597837] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 1.597967] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.598004] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.598047] sd 0:0:0:0: [sda] Write Protect is off
[ 1.598050] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.598073] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.598191] sda:
[ 1.599088] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7561A GH09 PQ: 0 ANSI: 5
[ 1.603855] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.603859] Uniform CD-ROM driver Revision: 3.20
[ 1.603953] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.603996] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.604044] ata6: port disabled. ignoring.
[ 2.016111] sda1 sda2 sda3 sda4
[ 2.034893] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.034923] Freeing unused kernel memory: 540k freed
[ 2.035307] Write protecting the kernel text: 4568k
[ 2.035346] Write protecting the kernel read-only data: 1836k
[ 2.447470] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.447818] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 2.447823] alloc irq_desc for 20 on node -1
[ 2.447826] alloc kstat_irqs on node -1
[ 2.447837] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 2.447842] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 2.507115] acpi device:25: registered as cooling_device2
[ 2.507254] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input6
[ 2.507291] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 2.513064] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[ 2.513080] ohci1394 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5
[ 2.571052] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.973088] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:bf:8c:8b
[ 2.973094] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 3.379371] xor: automatically using best checksumming function: pIII_sse
[ 3.397009] pIII_sse : 6066.000 MB/sec
[ 3.397012] xor: using function: pIII_sse (6066.000 MB/sec)
[ 3.399641] device-mapper: dm-raid45: initialized v0.2594b
[ 3.726365] PM: Starting manual resume from disk
[ 3.726370] PM: Resume from partition 8:4
[ 3.726372] PM: Checking hibernation image.
[ 3.726506] PM: Resume from disk failed.
[ 3.741760] EXT4-fs (sda3): barriers enabled
[ 3.766839] kjournald2 starting: pid 449, dev sda3:8, commit interval 5 seconds
[ 3.766850] EXT4-fs (sda3): delayed allocation enabled
[ 3.766854] EXT4-fs: file extents enabled
[ 3.769285] EXT4-fs: mballoc enabled
[ 3.769304] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 3.860245] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b002e617500]
[ 5.564006] Adding 4586548k swap on /dev/sda4. Priority:-1 extents:1 across:4586548k
[ 5.798254] EXT4-fs (sda3): internal journal on sda3:8
[ 6.250199] udev: starting version 147
[ 7.393688] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 7.604623] lib80211: common routines for IEEE802.11 drivers
[ 7.604627] lib80211_crypt: registered algorithm 'NULL'
[ 7.680690] Linux agpgart interface v0.103
[ 8.261388] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 8.340333] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 8.550260] nvidia: module license 'NVIDIA' taints kernel.
[ 8.550266] Disabling lock debugging due to kernel taint
[ 8.804581] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[ 8.804588] alloc irq_desc for 16 on node -1
[ 8.804591] alloc kstat_irqs on node -1
[ 8.804602] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16
[ 8.804608] nvidia 0000:00:12.0: setting latency timer to 64
[ 8.804843] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009
[ 8.864179] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 8.864187] alloc irq_desc for 19 on node -1
[ 8.864189] alloc kstat_irqs on node -1
[ 8.864200] wl 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
[ 8.864206] wl 0000:03:00.0: setting latency timer to 64
[ 8.878422] Linux video capture interface: v2.00
[ 8.880133] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 8.880135] ricoh-mmc: Copyright(c) Philip Langdale
[ 8.880167] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12)
[ 8.880190] ricoh-mmc: Controller is now disabled.
[ 8.882498] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 8.882518] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 8.927644] lib80211_crypt: registered algorithm 'TKIP'
[ 8.927825] eth1: Broadcom BCM4311 802.11 Wireless Controller 5.10.91.9
[ 8.934602] udev: renamed network interface eth1 to eth2
[ 8.952942] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b015)
[ 8.956188] input: HP Webcam as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input8
[ 8.956233] usbcore: registered new interface driver uvcvideo
[ 8.956237] USB Video Class driver (v0.1.0)
[ 8.983539] sdhci: Secure Digital Host Controller Interface driver
[ 8.983542] sdhci: Copyright(c) Pierre Ossman
[ 9.056884] lp: Unknown parameter `ath_pci'
[ 9.193369] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22)
[ 9.193701] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[ 9.193714] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
[ 9.195774] Registered led device: mmc0::
[ 9.196805] mmc0: SDHCI controller on PCI [0000:02:05.1] using PIO
[ 9.250401] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.825889] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 9.825896] alloc irq_desc for 21 on node -1
[ 9.825899] alloc kstat_irqs on node -1
[ 9.825910] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 9.825948] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 12.532273] alloc irq_desc for 27 on node -1
[ 12.532278] alloc kstat_irqs on node -1
[ 12.532288] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 22.729021] eth2: no IPv6 routers present
[ 22.769047] eth0: no IPv6 routers present
[ 24.730649] lp: driver loaded but no devices found
[ 24.766167] ppdev: user-space parallel port driver
[ 87.000051] Clocksource tsc unstable (delta = -168612083 ns)

Κώδικας: Επιλογή όλων

lo no wireless extensions.

eth0 no wireless extensions.

eth2 IEEE 802.11 Nickname:""
Access Point: Not-Associated

[Nastas]

dokimase sto termatiko tin entoli nm-applet thatreksei to eikonidio tou network-manager. tsekare na deis an meta tha se sindesei sto internet.

[Giant]

μπα...τπτ...λεει comand not found

[logari81]

α εσωτερική ειναι η κάρτα; Δώσε και το αποτελεσμα της εντολής

Κώδικας: Επιλογή όλων

lspci -nn

[Giant]

ναι εσωτερικη broadcom corporation BCM4311 802.11b/g WLAN .....

[Nastas]

Κομματακι δυσκολο μου φαινεται να λεει command not found, απ'τη στιγμη που λες οτι υπαρχει εγκαταστημενος ο network-manager-manager. ετρεξες σωστα την εντολη? nm-applet

[Giant]

Κώδικας: Επιλογή όλων

No command 'nm_applet' found, did you mean:
Command 'nm-applet' from package 'network-manager-gnome' (main)
Command 'nm-applet' from package 'mythbuntu-diskless-client' (universe)
nm_applet: command not found


[logari81]

ναι εσωτερικη broadcom corporation BCM4311 802.11b/g WLAN .....

Δώσε σε παρακαλώ το αποτελεσμα που σου ζήτησα.