Broadcom 43xx δεν δουλεύει...

...κάρτες δικτύου, modems, προβλήματα internet
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα των εντολών στο τερματικό :
lspci -nn
lsusb
rfkill list

Broadcom 43xx δεν δουλεύει...

Δημοσίευσηαπό kouskous » 26 Δεκ 2010, 19:54

Καλησπέρα Καλα Χριστούγεννα και καλές γιορτές σε όλους!
Μετα την εγκατάσταση νεωτερου kernel Απο αυτόν που είχε το σύστημα δεν δουλεύει η ασύρματη κάρτα δυκτιου.
Ο kernel που εγκατεστησα είναι ο 2.6.36.7 rc
Το ίδιο συμβενει και με πιο παλιό η πιο καινουργιο kernel εκτως Απο τον rc8
Όταν κάνω έλεγχο με τον rc8 να δω ποιος έχει φορτώσει μου λέει 2.6.35....
Οποίος μπορεί ας βοηθήσει είτε να δουλέψει με τον rc7 είτε να τον δει τον rc8
Ευχαριστώ και καλές γιορτές!!!
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 19.10 eoan 5.3.0-24-generic 64bit (en_US.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.3.0-18-generic
3 AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx ‖ RAM 15023 MiB ‖ HP 84D2 - HP HP Laptop 17-ca0xxx
4 Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] {amdgpu}
5 eno1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp3s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
kouskous
punkTUX
punkTUX
 
Δημοσιεύσεις: 173
Εγγραφή: 18 Νοέμ 2008, 23:25
Εκτύπωση

Re: Broadcom 43xx δεν δουλεύει...

Δημοσίευσηαπό s.dalas » 26 Δεκ 2010, 21:45

Μπες με τον πυρήνα που θες και δώσε μας τα αποτελέσματα απο
Κώδικας: Επιλογή όλων
lsusb
lspci -nn
dmesg
lsmod
...Open minds using open source...
Γνώσεις ⇛ Linux: Όσο ζω μαθαίνω | Προγραμματισμός: Πολύ λίγα | Αγγλικά: οφ κορς
Desktop -> Dual Core 2.5GHz, 5Gb of Ram, 640Gb HD, Nvidia 9500GT + Ubuntu 13.10 = Life is simple...
Notebook -> 10.04 dual boot Win 7 σε lenovo ideapad U350
;) Οδηγός προς Νεοεισερχομένους ;) Οδηγοί - How to - Tutorials σε Κατηγορίες ;) http://UbuntuForums.org ;)
Άβαταρ μέλους
s.dalas
powerTUX
powerTUX
 
Δημοσιεύσεις: 2115
Εγγραφή: 19 Οκτ 2009, 03:42
Τοποθεσία: Καλλιθεα, Αθηνα
Εκτύπωση

Re: Broadcom 43xx δεν δουλεύει...

Δημοσίευσηαπό kouskous » 26 Δεκ 2010, 23:01

Κώδικας: Επιλογή όλων
eric@kouskous:~$ lsusb
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 008: ID 413c:8160 Dell Computer Corp.
Bus 001 Device 007: ID 413c:8162 Dell Computer Corp.
Bus 001 Device 006: ID 413c:8161 Dell Computer Corp.
Bus 001 Device 005: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 004: ID 0c45:641d Microdia
Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Κώδικας: Επιλογή όλων
eric@kouskous:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 12)
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 12)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06)
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06)
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 06)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 06)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
02:00.0 VGA compatible controller [0300]: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] [1002:68e0]
02:00.1 Audio device [0403]: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] [1002:aa68]
04:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
eric@kouskous:~$

Κώδικας: Επιλογή όλων
[ 0.561473] reserve RAM buffer: 00000000bf717000 - 00000000bfffffff
[ 0.561477] reserve RAM buffer: 00000000bf77e000 - 00000000bfffffff
[ 0.561480] reserve RAM buffer: 00000000bf7e2000 - 00000000bfffffff
[ 0.561482] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 0.561573] NetLabel: Initializing
[ 0.561575] NetLabel: domain hash size = 128
[ 0.561577] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.561589] NetLabel: unlabeled traffic allowed by default
[ 0.561635] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.561642] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.563664] Switching to clocksource tsc
[ 0.572396] AppArmor: AppArmor Filesystem Enabled
[ 0.572412] pnp: PnP ACPI init
[ 0.572430] ACPI: bus type pnp registered
[ 0.575835] pnp: PnP ACPI: found 11 devices
[ 0.575837] ACPI: ACPI bus type pnp unregistered
[ 0.575840] PnPBIOS: Disabled by ACPI PNP
[ 0.575853] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.575856] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.575858] system 00:05: [io 0x0600-0x0603] has been reserved
[ 0.575861] system 00:05: [io 0xffff] has been reserved
[ 0.575863] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.575869] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.575871] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.575874] system 00:05: [io 0xfe00] has been reserved
[ 0.575880] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.575883] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.575885] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.575888] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.575891] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.575893] system 00:09: [mem 0xf0304000-0xf0304fff] has been reserved
[ 0.575896] system 00:09: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.575899] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.575902] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.575905] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.575907] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.575910] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.611629] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.611635] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.611638] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.611641] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc09fffff]
[ 0.611646] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.611648] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.611652] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.611655] pci 0000:00:01.0: PCI bridge to [bus 02-02]
[ 0.611658] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.611661] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.611665] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.611669] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.611673] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.611679] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.611685] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.611693] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.611697] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.611703] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.611709] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.611718] pci 0000:05:00.0: BAR 6: assigned [mem 0xf0420000-0xf043ffff pref]
[ 0.611720] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.611724] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.611731] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc09fffff]
[ 0.611736] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.611745] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.611746] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.611752] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.611757] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.611775] alloc irq_desc for 16 on node -1
[ 0.611777] alloc kstat_irqs on node -1
[ 0.611784] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.611788] pci 0000:00:01.0: setting latency timer to 64
[ 0.611799] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.611804] pci 0000:00:1c.0: setting latency timer to 64
[ 0.611816] alloc irq_desc for 17 on node -1
[ 0.611818] alloc kstat_irqs on node -1
[ 0.611824] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.611829] pci 0000:00:1c.1: setting latency timer to 64
[ 0.611840] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.611845] pci 0000:00:1c.5: setting latency timer to 64
[ 0.611855] pci 0000:00:1e.0: setting latency timer to 64
[ 0.611860] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.611862] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.611864] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.611866] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.611869] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.611871] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.611873] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.611875] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.611877] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.611880] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.611882] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.611884] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.611887] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.611889] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.611891] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.611893] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
[ 0.611896] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.611898] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.611903] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.611905] pci_bus 0000:05: resource 1 [mem 0xc0600000-0xc09fffff]
[ 0.611908] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.611910] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.611912] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.611914] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.611916] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.611918] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.611921] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.611923] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.611925] pci_bus 0000:06: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.611927] pci_bus 0000:06: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.611964] NET: Registered protocol family 2
[ 0.612019] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.612198] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.612888] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.613234] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.613236] TCP reno registered
[ 0.613240] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.613251] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.613323] NET: Registered protocol family 1
[ 0.613409] pci 0000:02:00.0: Boot video device
[ 0.613459] PCI: CLS 64 bytes, default 64
[ 0.613481] Simple Boot Flag at 0x36 set to 0x1
[ 0.613740] cpufreq-nforce2: No nForce2 chipset.
[ 0.613763] Scanning for low memory corruption every 60 seconds
[ 0.613883] audit: initializing netlink socket (disabled)
[ 0.613892] type=2000 audit(1293392998.448:1): initialized
[ 0.625303] highmem bounce pool size: 64 pages
[ 0.625309] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.626561] VFS: Disk quotas dquot_6.5.2
[ 0.626617] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.627140] fuse init (API version 7.14)
[ 0.627217] msgmni has been set to 1615
[ 0.627530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.627533] io scheduler noop registered
[ 0.627535] io scheduler deadline registered
[ 0.627547] io scheduler cfq registered (default)
[ 0.627643] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.627666] alloc irq_desc for 40 on node -1
[ 0.627668] alloc kstat_irqs on node -1
[ 0.627676] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.627729] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.627773] alloc irq_desc for 41 on node -1
[ 0.627775] alloc kstat_irqs on node -1
[ 0.627783] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.627876] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.627922] alloc irq_desc for 42 on node -1
[ 0.627923] alloc kstat_irqs on node -1
[ 0.627932] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.628020] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.628064] alloc irq_desc for 43 on node -1
[ 0.628066] alloc kstat_irqs on node -1
[ 0.628074] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.628171] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.628295] \_SB_.PCI0:_OSC invalid UUID
[ 0.628297] _OSC request data:1 0 1f
[ 0.628409] \_SB_.PCI0:_OSC invalid UUID
[ 0.628410] _OSC request data:1 0 1f
[ 0.628519] \_SB_.PCI0:_OSC invalid UUID
[ 0.628520] _OSC request data:1 0 1f
[ 0.628641] \_SB_.PCI0:_OSC invalid UUID
[ 0.628642] _OSC request data:1 0 1f
[ 0.628749] \_SB_.PCI0:_OSC invalid UUID
[ 0.628751] _OSC request data:1 0 1f
[ 0.628857] \_SB_.PCI0:_OSC invalid UUID
[ 0.628859] _OSC request data:1 0 1f
[ 0.628879] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.628952] intel_idle: MWAIT substates: 0x1120
[ 0.628953] intel_idle: v0.4 model 0x25
[ 0.628955] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.629078] ACPI: AC Adapter [ADP1] (on-line)
[ 0.629137] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.629143] ACPI: Power Button [PWRB]
[ 0.629179] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.629182] ACPI: Sleep Button [SLPB]
[ 0.629217] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.629939] ACPI: Lid Switch [LID0]
[ 0.629980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.629984] ACPI: Power Button [PWRF]
[ 0.630117] ACPI: Fan [FAN0] (off)
[ 0.630220] ACPI: Fan [FAN1] (off)
[ 0.630593] ACPI: acpi_idle yielding to intel_idle
[ 0.634439] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.634446] ACPI: Thermal Zone [TZ00] (27 C)
[ 0.635194] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.635201] ACPI: Thermal Zone [TZ01] (0 C)
[ 0.635269] ERST: Table is not found!
[ 0.635303] isapnp: Scanning for PnP cards...
[ 0.636116] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.637846] brd: module loaded
[ 0.638434] loop: module loaded
[ 0.639062] Fixed MDIO Bus: probed
[ 0.639100] PPP generic driver version 2.4.2
[ 0.639136] tun: Universal TUN/TAP device driver, 1.6
[ 0.639139] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.639224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.639251] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.639269] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.639273] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.639309] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.639342] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.643314] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.643340] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0306000
[ 0.655890] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.656042] hub 1-0:1.0: USB hub found
[ 0.656048] hub 1-0:1.0: 3 ports detected
[ 0.656124] alloc irq_desc for 23 on node -1
[ 0.656126] alloc kstat_irqs on node -1
[ 0.656133] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.656151] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.656156] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.656192] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.656222] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.660192] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.660213] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0306400
[ 0.667271] ACPI: Battery Slot [BAT0] (battery present)
[ 0.675882] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.676005] hub 2-0:1.0: USB hub found
[ 0.676010] hub 2-0:1.0: 3 ports detected
[ 0.676087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.676104] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.676207] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.681558] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.681566] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.681682] mice: PS/2 mouse device common for all mice
[ 0.681854] rtc_cmos 00:06: RTC can wake from S4
[ 0.681902] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.681935] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.682052] device-mapper: uevent: version 1.0.3
[ 0.682184] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.682284] device-mapper: multipath: version 1.1.1 loaded
[ 0.682289] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.682408] EISA: Probing bus 0 at eisa.0
[ 0.682411] EISA: Cannot allocate resource for mainboard
[ 0.682414] Cannot allocate resource for EISA slot 1
[ 0.682417] Cannot allocate resource for EISA slot 2
[ 0.682419] Cannot allocate resource for EISA slot 3
[ 0.682421] Cannot allocate resource for EISA slot 4
[ 0.682423] Cannot allocate resource for EISA slot 5
[ 0.682425] Cannot allocate resource for EISA slot 6
[ 0.682428] Cannot allocate resource for EISA slot 7
[ 0.682430] Cannot allocate resource for EISA slot 8
[ 0.682432] EISA: Detected 0 cards.
[ 0.682708] cpuidle: using governor ladder
[ 0.682920] cpuidle: using governor menu
[ 0.683256] TCP cubic registered
[ 0.683413] NET: Registered protocol family 10
[ 0.683807] lo: Disabled Privacy Extensions
[ 0.684061] NET: Registered protocol family 17
[ 0.685807] Using IPI No-Shortcut mode
[ 0.685897] PM: Resume from disk failed.
[ 0.685909] registered taskstats version 1
[ 0.686322] Magic number: 6:794:850
[ 0.686414] rtc_cmos 00:06: setting system clock to 2010-12-26 19:49:59 UTC (1293392999)
[ 0.686417] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.686419] EDD information not available.
[ 0.686456] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.819555] Freeing initrd memory: 10484k freed
[ 0.995736] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.004317] isapnp: No Plug & Play device found
[ 1.004334] Freeing unused kernel memory: 704k freed
[ 1.004645] Write protecting the kernel text: 5092k
[ 1.004724] Write protecting the kernel read-only data: 2016k
[ 1.020920] udev[100]: starting version 163
[ 1.074273] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.074305] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.074357] r8169 0000:05:00.0: setting latency timer to 64
[ 1.074409] alloc irq_desc for 44 on node -1
[ 1.074412] alloc kstat_irqs on node -1
[ 1.074429] r8169 0000:05:00.0: irq 44 for MSI/MSI-X
[ 1.075032] r8169 0000:05:00.0: eth0: RTL8102e at 0xf84a6000, b8:ac:6f:56:d2:60, XID 04e00000 IRQ 44
[ 1.079477] ahci 0000:00:1f.2: version 3.0
[ 1.079500] alloc irq_desc for 19 on node -1
[ 1.079503] alloc kstat_irqs on node -1
[ 1.079513] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.079566] alloc irq_desc for 45 on node -1
[ 1.079568] alloc kstat_irqs on node -1
[ 1.079580] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.079621] ahci: SSS flag set, parallel bus scan disabled
[ 1.079662] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.079667] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 1.079674] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.094889] scsi0 : ahci
[ 1.095055] scsi1 : ahci
[ 1.096015] scsi2 : ahci
[ 1.096564] scsi3 : ahci
[ 1.096637] ata1: SATA max UDMA/133 abar m2048@0xf0305000 port 0xf0305100 irq 45
[ 1.096643] ata2: SATA max UDMA/133 abar m2048@0xf0305000 port 0xf0305180 irq 45
[ 1.096645] ata3: DUMMY
[ 1.096647] ata4: DUMMY
[ 1.128295] hub 1-1:1.0: USB hub found
[ 1.128377] hub 1-1:1.0: 6 ports detected
[ 1.239585] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.372258] hub 2-1:1.0: USB hub found
[ 1.372452] hub 2-1:1.0: 8 ports detected
[ 1.415550] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.416859] ata1.00: ATA-8: WDC WD3200BEVT-75A23T0, 01.01A01, max UDMA/133
[ 1.416865] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.418438] ata1.00: configured for UDMA/133
[ 1.431694] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 01.0 PQ: 0 ANSI: 5
[ 1.431872] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.431992] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.432056] sd 0:0:0:0: [sda] Write Protect is off
[ 1.432059] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.432076] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.432193] sda:
[ 1.447702] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[ 1.466985] sda1 sda2 < sda5 sda6 >
[ 1.493819] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.542159] hub 1-1.1:1.0: USB hub found
[ 1.542376] hub 1-1.1:1.0: 3 ports detected
[ 1.615646] usb 1-1.4: new high speed USB device using ehci_hcd and address 4
[ 1.823539] usb 1-1.5: new high speed USB device using ehci_hcd and address 5
[ 1.937914] Initializing USB Mass Storage driver...
[ 1.938043] scsi4 : usb-storage 1-1.5:1.0
[ 1.938163] usbcore: registered new interface driver usb-storage
[ 1.938168] USB Mass Storage support registered.
[ 2.003473] usb 1-1.1.1: new full speed USB device using ehci_hcd and address 6
[ 2.155202] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.172395] usb 1-1.1.2: new full speed USB device using ehci_hcd and address 7
[ 2.176209] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW40, max UDMA/100
[ 2.176226] ata2.00: applying bridge limits
[ 2.198893] ata2.00: configured for UDMA/100
[ 2.218507] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C DW40 PQ: 0 ANSI: 5
[ 2.231995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.232000] Uniform CD-ROM driver Revision: 3.20
[ 2.232129] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.232186] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.238380] usbcore: registered new interface driver hiddev
[ 2.240037] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input5
[ 2.240130] generic-usb 0003:413C:8161.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.0-1.1.1/input0
[ 2.240144] usbcore: registered new interface driver usbhid
[ 2.240146] usbhid: USB HID core driver
[ 2.269963] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input6
[ 2.270042] generic-usb 0003:413C:8162.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.0-1.1.2/input0
[ 2.630315] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.939258] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.939977] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.944482] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.904552] Adding 7811068k swap on /dev/sda5. Priority:-1 extents:1 across:7811068k
[ 5.953688] udev[383]: starting version 163
[ 6.865655] usb 1-1.1.3: new full speed USB device using ehci_hcd and address 8
[ 7.667173] Bluetooth: Core ver 2.15
[ 7.667229] NET: Registered protocol family 31
[ 7.667232] Bluetooth: HCI device and connection manager initialized
[ 7.667235] Bluetooth: HCI socket layer initialized
[ 7.696082] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 7.696213] input: Dell WMI hotkeys as /devices/virtual/input/input7
[ 7.748321] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.748825] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.749395] usbcore: registered new interface driver btusb
[ 7.817676] Linux agpgart interface v0.103
[ 7.898826] lib80211: common routines for IEEE802.11 drivers
[ 7.898829] lib80211_crypt: registered algorithm 'NULL'
[ 8.061570] Linux video capture interface: v2.00
[ 8.125142] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:641d)
[ 8.262376] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
[ 8.262460] usbcore: registered new interface driver uvcvideo
[ 8.262463] USB Video Class driver (v0.1.0)
[ 8.280164] acpi device:02: registered as cooling_device6
[ 8.280387] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input9
[ 8.280522] ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
[ 8.395665] lp: driver loaded but no devices found
[ 8.539717] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10
[ 8.557753] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11
[ 8.739819] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.739825] Disabling lock debugging due to kernel taint
[ 8.783137] [fglrx] Maximum main memory to use for locked dma buffers: 3722 MBytes.
[ 8.783351] [fglrx] vendor: 1002 device: 68e0 count: 1
[ 8.783742] [fglrx] ioport: bar 4, base 0x2000, size: 0x100
[ 8.783762] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.783768] pci 0000:02:00.0: setting latency timer to 64
[ 8.783981] [fglrx] Kernel PAT support is enabled
[ 8.784002] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors
[ 8.850378] type=1400 audit(1293393007.665:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=538 comm="apparmor_parser"
[ 8.850913] type=1400 audit(1293393007.665:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=538 comm="apparmor_parser"
[ 8.851207] type=1400 audit(1293393007.665:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser"
[ 8.937559] dell-wmi-aio: No known WMI GUID found
[ 9.354314] alloc irq_desc for 22 on node -1
[ 9.354318] alloc kstat_irqs on node -1
[ 9.354325] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.354385] alloc irq_desc for 46 on node -1
[ 9.354386] alloc kstat_irqs on node -1
[ 9.354398] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 9.354435] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.546797] wl 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.546809] wl 0000:04:00.0: setting latency timer to 64
[ 9.598396] lib80211_crypt: registered algorithm 'TKIP'
[ 9.598575] eth1: Broadcom BCM4353 802.11 Hybrid Wireless Controller 5.60.48.36
[ 9.614336] hda_codec: ALC269: BIOS auto-probing.
[ 9.619207] HDA Intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.619278] alloc irq_desc for 47 on node -1
[ 9.619280] alloc kstat_irqs on node -1
[ 9.619292] HDA Intel 0000:02:00.1: irq 47 for MSI/MSI-X
[ 9.619320] HDA Intel 0000:02:00.1: setting latency timer to 64
[ 12.921665] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 13.582217] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.490218] type=1400 audit(1293393013.305:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=981 comm="apparmor_parser"
[ 14.490803] type=1400 audit(1293393013.305:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=981 comm="apparmor_parser"
[ 14.491101] type=1400 audit(1293393013.305:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=981 comm="apparmor_parser"
[ 14.537356] type=1400 audit(1293393013.353:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=980 comm="apparmor_parser"
[ 14.540065] type=1400 audit(1293393013.353:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=985 comm="apparmor_parser"
[ 14.679417] type=1400 audit(1293393013.497:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=984 comm="apparmor_parser"
[ 14.680082] type=1400 audit(1293393013.497:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=984 comm="apparmor_parser"
[ 14.812809] ppdev: user-space parallel port driver
[ 15.247481] type=1400 audit(1293393014.065:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=982 comm="apparmor_parser"
[ 15.254221] type=1400 audit(1293393014.069:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=982 comm="apparmor_parser"
[ 15.258490] type=1400 audit(1293393014.077:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=982 comm="apparmor_parser"
[ 16.287614] r8169 0000:05:00.0: eth0: link down
[ 16.287799] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.241455] Bluetooth: L2CAP ver 2.14
[ 17.241458] Bluetooth: L2CAP socket layer initialized
[ 17.348063] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.348067] Bluetooth: BNEP filters: protocol multicast
[ 17.930138] Bluetooth: SCO (Voice Link) ver 0.6
[ 17.930141] Bluetooth: SCO socket layer initialized
[ 18.253746] Bluetooth: RFCOMM TTY layer initialized
[ 18.253760] Bluetooth: RFCOMM socket layer initialized
[ 18.253764] Bluetooth: RFCOMM ver 1.11
[ 20.027416] [fglrx] ATIF platform detected with notification ID: 0x81
[ 21.046174] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 21.046384] alloc irq_desc for 48 on node -1
[ 21.046387] alloc kstat_irqs on node -1
[ 21.046402] fglrx_pci 0000:02:00.0: irq 48 for MSI/MSI-X
[ 21.047140] [fglrx] Firegl kernel thread PID: 1279
[ 21.047369] [fglrx] IRQ 48 Enabled
[ 21.279437] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 21.347793] [fglrx] Gart USWC size:1216 M.
[ 21.347797] [fglrx] Gart cacheable size:481 M.
[ 21.347803] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 21.347805] [fglrx] Reserved FB block: Unshared offset:f931000, size:3cf000
[ 21.347808] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 23.894444] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 23.897283] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 26.771989] eth1: no IPv6 routers present
[ 30.589136] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 32.282203] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 34.619769] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
eric@kouskous:~$ dmesg

Κώδικας: Επιλογή όλων
eric@kouskous:~$ lsmod
Module Size Used by
michael_mic 1744 4
arc4 1165 2
binfmt_misc 6599 1
rfcomm 33811 4
sco 7998 2
bnep 9542 2
l2cap 37008 16 rfcomm,bnep
parport_pc 26378 0
ppdev 5556 0
snd_hda_codec_atihdmi 2411 1
snd_hda_codec_realtek 218227 1
lib80211_crypt_tkip 7736 0
wl 1959565 0
snd_hda_intel 22203 2
snd_hda_codec 87552 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5040 1 snd_hda_codec
snd_seq_midi 4588 0
snd_pcm 71603 2 snd_hda_intel,snd_hda_codec
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 2 snd_seq_midi,snd_seq_midi_event
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 49038 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
joydev 8767 0
soundcore 880 1 snd
dell_wmi_aio 1733 0
fglrx 2252898 140
video 18712 0
snd_page_alloc 7216 2 snd_hda_intel,snd_pcm
psmouse 59033 0
uvcvideo 55911 0
videodev 43098 1 uvcvideo
v4l1_compat 13359 2 uvcvideo,videodev
intel_agp 27022 0
dell_laptop 5730 0
lib80211 5058 2 lib80211_crypt_tkip,wl
output 1883 1 video
agpgart 32075 2 fglrx,intel_agp
serio_raw 4022 0
btusb 11001 2
dcdbas 5442 1 dell_laptop
lp 7342 0
dell_wmi 2852 0
parport 31492 3 parport_pc,ppdev,lp
bluetooth 50500 9 rfcomm,sco,bnep,l2cap,btusb
usbhid 36978 0
hid 67742 1 usbhid
usb_storage 40204 0
ahci 19198 3
r8169 36777 0
mii 4425 1 r8169
libahci 21728 1 ahci
eric@kouskous:~$
Τελευταία επεξεργασία από Epirotes και 26 Δεκ 2010, 23:30, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: Προσθήκη code tags
kouskous
punkTUX
punkTUX
 
Δημοσιεύσεις: 173
Εγγραφή: 18 Νοέμ 2008, 23:25
Εκτύπωση

Re: Broadcom 43xx δεν δουλεύει...

Δημοσίευσηαπό s.dalas » 26 Δεκ 2010, 23:26

Καταρχήν επεξεργάσου τα ποστς και βάλε τα αποτελέσματα των εντολών σε code tags
Κώδικας: Επιλογή όλων
[code]εδώ το κέιμενο [/code]
είναι το κουμπάκι δίπλα απο το λαμπάκι πάνω απο το κουτί που γράφεις το κείμενο.

Μετά συνδέσου με καλώδιο και ψάξε για οδηγούς υλικού στο σύστημα->διαχείριση->οδηγοι υλικού ? Στα αγγλικά έιναι System->Administration->Hardware drivers
Αν δε δουλέψει και έτσι τότε εγκατέστησε απο το synaptic τα εξής b43-fwcutter και bcmwl-kernel-source και πες μας.
...Open minds using open source...
Γνώσεις ⇛ Linux: Όσο ζω μαθαίνω | Προγραμματισμός: Πολύ λίγα | Αγγλικά: οφ κορς
Desktop -> Dual Core 2.5GHz, 5Gb of Ram, 640Gb HD, Nvidia 9500GT + Ubuntu 13.10 = Life is simple...
Notebook -> 10.04 dual boot Win 7 σε lenovo ideapad U350
;) Οδηγός προς Νεοεισερχομένους ;) Οδηγοί - How to - Tutorials σε Κατηγορίες ;) http://UbuntuForums.org ;)
Άβαταρ μέλους
s.dalas
powerTUX
powerTUX
 
Δημοσιεύσεις: 2115
Εγγραφή: 19 Οκτ 2009, 03:42
Τοποθεσία: Καλλιθεα, Αθηνα
Εκτύπωση

Re: Broadcom 43xx δεν δουλεύει...

Δημοσίευσηαπό Epirotes » 26 Δεκ 2010, 23:31

@ kouskous: Το έκανα εγώ για σένα! Θυμήσου το για άλλη φορά! ;) Είχες βάλει τα αποτελέσματα σε list tags, αλλά κι αυτό λάθος ήταν.
Οδηγίες για νέα μέλη ---- Οδηγοί - How to - Tutorials
1 Linux: Μέτριος ┃ Προγραμματισμός: Καθόλου ┃ Αγγλικά: Προχωρημένος
2 Ubuntu 16.04 precise 64bit (el_GR.UTF-8), Windows 10
3 Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 8 GB ‖ Gigabyte X48-DS4
4 Advanced Micro Devices [AMD] nee ATI Caicos [Radeon HD 6450] [1002:6779]
5 eth0: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Άβαταρ μέλους
Epirotes
superbTUX
superbTUX
 
Δημοσιεύσεις: 3185
Εγγραφή: 05 Νοέμ 2008, 00:25
Τοποθεσία: Ιωάννινα, Ήπειρος
Εκτύπωση

Re: Broadcom 43xx δεν δουλεύει...

Δημοσίευσηαπό xaris2335 » 27 Δεκ 2010, 16:34

Για δώσε αποτέλεσμα απο
Κώδικας: Επιλογή όλων
lspci -vvd 10ec:8136
iwconfig
sudo iwlist scan
nm-tool
Spoiler: show
Γνώσεις ⇛ Linux: | Προγραμματισμός:
Αγγλικά: καλά
Λειτουργικό ⇛ Ubuntu 10.04 LTS (32bit) ΕΛ σε Intel core 2 quad core Q9300
Προδιαγραφές ⇛INTEL CORE 2 QUAD CORE Q9300 2.50 GHZ LGA|WESTERN DIGITAL 750GB SATA2|ASUS 2GB DDR3 1333MHZ|GIGABYTE|ASUS EN9800GTX/HTDP 512MB PCI-E|Quickcam logitech E2500|Optiarc DVD RW AD-7173A

Κανάλι για Λίνουξ και όχι μόνο :lol: Διανομές Λίνουξ :lol:Συμβατότητα περιφ/κών με ubuntu :lol:
Άβαταρ μέλους
xaris2335
powerTUX
powerTUX
 
Δημοσιεύσεις: 1962
Εγγραφή: 10 Οκτ 2008, 16:16
Εκτύπωση

Re: Broadcom 43xx δεν δουλεύει...

Δημοσίευσηαπό kouskous » 27 Δεκ 2010, 17:40

Μετα απο αρκετο κοπο και πολες δωκιμες αποφασισα να αφυσω τον πυρηνα rc8 http://kernel.ubuntu.com/~kernel-ppa/ma ... -maverick/
το μονο που δεν καταλαβενω ειναι γιατι οταν δινω uname -r περνω αυτο eric@kouskous:~$ uname -r
2.6.35-24-generic-pae
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 19.10 eoan 5.3.0-24-generic 64bit (en_US.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.3.0-18-generic
3 AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx ‖ RAM 15023 MiB ‖ HP 84D2 - HP HP Laptop 17-ca0xxx
4 Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] {amdgpu}
5 eno1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp3s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
kouskous
punkTUX
punkTUX
 
Δημοσιεύσεις: 173
Εγγραφή: 18 Νοέμ 2008, 23:25
Εκτύπωση


Επιστροφή στο Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet