Netgear WG111T usb σε Ubuntu

[statik]

Eχω το Netgear WG111T usb , και δεν μπορω να βγαλω ακρη....
Ειμαι αρχαριος σε ubuntu. Drivers εχω μονο για Win. Εβαλα στο τερματικο lnusb και εβγαλε Bus 001 Device 004: ID 1385:4251 Netgear, Inc WG111T (no firmware). Εψαξα και ειδα να πατησω cat /boot/config-`uname -r` | grep -i --color prism και εβγαλε CONFIG_PRISM54=m
CONFIG_PRISM2_USB=m
Στη σελιδα http://linuxwireless.org/en/users/Devices/USB κατι γραφει , εκει βρηκα και εγραψα τα παραπανω αλλα δεν βγαζω ακρη.
Στην διαχειρηση συστηματος -> υλικο-> οδηγοι υλικου δεν βρισκει κατι
Please help me

[statik]

Ρε παιδια, οθτε ενας δεν εχει Netgear? Μου λεει στην ανιχνευση υλικου οτι δεν υπαρχουν ιδιωτικοι οδηγοι.(καπως ετσι, τι κανουμε τωρα?)

[logari81]

δεν ειχα προσεξει το ερωτημα σου, απο εδω και περα παρακολουθησε την συζήτηση εδω:
viewtopic.php?f=39&t=9004&p=91542#p91542

[statik]

Aν μπορει να βοηθησει κανεις, εχω usb wifi netgear wg111t. An και εχει ξανασυζητηθει το θεμα , δεν δουλεψε.
lsusb

Κώδικας: Επιλογή όλων

Bus 004 Device 002: ID 062a:0102 Creative Labs Wireless Keyboard/Mouse Combo [MK1152WC]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 1385:4251 Netgear, Inc WG111T (no firmware)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


εκανα μετα τα παρακατω

Έχω ετοιμασει ενα πακετο αυτου του οδηγου στο ppa μου. Για να το εγκαταστήσεις πρεπει να τρεξεις:

Κώδικας: Επιλογή όλων
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install build-essential linux-headers-generic module-assistant


να κανεις επανεκκινηση και να κατεβασεις το πακετο:
https://launchpad.net/~logari81/+archiv ... d1_all.deb
και να το εγκαταστασεις κανοντας διπλό κλικ.

Μετά τρεχεις

Κώδικας: Επιλογή όλων
sudo m-a a-i ar5523-source


κι αφου τελειωσει συνδεεις το στικ.

Τρεχεις

Κώδικας: Επιλογή όλων
dmesg

dmesg

Κώδικας: Επιλογή όλων

[ 0.407223] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.407509] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.407792] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.408089] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.408375] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.408660] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.408951] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
[ 0.409239] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *5
[ 0.409528] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.409816] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
[ 0.410103] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
[ 0.410392] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[ 0.410686] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 0.410974] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 0.411310] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.411600] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *15
[ 0.411894] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
[ 0.412197] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *11
[ 0.412487] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.412773] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.413065] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *9
[ 0.413353] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *5
[ 0.413643] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[ 0.413929] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[ 0.413985] HEST: Table is not found!
[ 0.414059] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.414062] vgaarb: loaded
[ 0.414204] SCSI subsystem initialized
[ 0.414212] libata version 3.00 loaded.
[ 0.414212] usbcore: registered new interface driver usbfs
[ 0.414212] usbcore: registered new interface driver hub
[ 0.414212] usbcore: registered new device driver usb
[ 0.414212] ACPI: WMI: Mapper loaded
[ 0.414212] PCI: Using ACPI for IRQ routing
[ 0.414212] PCI: pci_cache_line_size set to 64 bytes
[ 0.414212] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.414212] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.414212] NetLabel: Initializing
[ 0.414212] NetLabel: domain hash size = 128
[ 0.414212] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.414212] NetLabel: unlabeled traffic allowed by default
[ 0.414212] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.414212] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.414212] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.428225] Switching to clocksource tsc
[ 0.438006] AppArmor: AppArmor Filesystem Enabled
[ 0.438024] pnp: PnP ACPI init
[ 0.438044] ACPI: bus type pnp registered
[ 0.446585] pnp: PnP ACPI: found 14 devices
[ 0.446588] ACPI: ACPI bus type pnp unregistered
[ 0.446592] PnPBIOS: Disabled by ACPI PNP
[ 0.446606] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.446609] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.446612] system 00:05: [io 0x4000-0x407f] has been reserved
[ 0.446614] system 00:05: [io 0x4080-0x40ff] has been reserved
[ 0.446616] system 00:05: [io 0x4400-0x447f] has been reserved
[ 0.446619] system 00:05: [io 0x4480-0x44ff] has been reserved
[ 0.446621] system 00:05: [io 0x4800-0x487f] has been reserved
[ 0.446624] system 00:05: [io 0x4880-0x48ff] has been reserved
[ 0.446627] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.446629] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.446632] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.446635] system 00:05: [mem 0xfefe2000-0xfefe3fff] has been reserved
[ 0.446637] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.446640] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.446645] system 00:09: [io 0x0290-0x0297] has been reserved
[ 0.446650] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.446653] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.446658] system 00:0c: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.446663] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.446666] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.446668] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.446671] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.446673] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.482657] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.482660] pci 0000:00:09.0: bridge window [io disabled]
[ 0.482663] pci 0000:00:09.0: bridge window [mem disabled]
[ 0.482667] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 0.482671] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.482673] pci 0000:00:0c.0: bridge window [io disabled]
[ 0.482683] pci 0000:00:0c.0: bridge window [mem disabled]
[ 0.482690] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 0.482704] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[ 0.482707] pci 0000:00:10.0: bridge window [io 0xd000-0xdfff]
[ 0.482710] pci 0000:00:10.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.482714] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf7ffffff 64bit pref]
[ 0.482718] pci 0000:00:15.0: PCI bridge to [bus 04-04]
[ 0.482720] pci 0000:00:15.0: bridge window [io disabled]
[ 0.482729] pci 0000:00:15.0: bridge window [mem disabled]
[ 0.482736] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.482749] pci 0000:00:16.0: PCI bridge to [bus 05-05]
[ 0.482754] pci 0000:00:16.0: bridge window [io 0xe000-0xefff]
[ 0.482765] pci 0000:00:16.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.482772] pci 0000:00:16.0: bridge window [mem pref disabled]
[ 0.482791] pci 0000:00:09.0: setting latency timer to 64
[ 0.483208] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[ 0.483212] alloc irq_desc for 23 on node -1
[ 0.483214] alloc kstat_irqs on node -1
[ 0.483220] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
[ 0.483228] pci 0000:00:0c.0: setting latency timer to 64
[ 0.483237] pci 0000:00:10.0: setting latency timer to 64
[ 0.483644] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[ 0.483658] alloc irq_desc for 22 on node -1
[ 0.483660] alloc kstat_irqs on node -1
[ 0.483665] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
[ 0.483673] pci 0000:00:15.0: setting latency timer to 64
[ 0.484083] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[ 0.484086] alloc irq_desc for 21 on node -1
[ 0.484087] alloc kstat_irqs on node -1
[ 0.484091] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
[ 0.484100] pci 0000:00:16.0: setting latency timer to 64
[ 0.484106] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.484108] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.484111] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.484113] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.484115] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.484117] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.484119] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.484121] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.484123] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.484125] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.484128] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.484130] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.484132] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.484134] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbefffff]
[ 0.484136] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf7ffffff 64bit pref]
[ 0.484139] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.484141] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.484177] NET: Registered protocol family 2
[ 0.484246] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.484471] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.484936] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.485123] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.485125] TCP reno registered
[ 0.485128] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.485136] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.485212] NET: Registered protocol family 1
[ 0.547827] pci 0000:03:00.0: Boot video device
[ 0.547833] PCI: CLS 64 bytes, default 64
[ 0.548109] cpufreq-nforce2: No nForce2 chipset.
[ 0.548135] Scanning for low memory corruption every 60 seconds
[ 0.548230] audit: initializing netlink socket (disabled)
[ 0.548241] type=2000 audit(1295813587.544:1): initialized
[ 0.557800] highmem bounce pool size: 64 pages
[ 0.557805] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.559183] VFS: Disk quotas dquot_6.5.2
[ 0.559241] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.559784] fuse init (API version 7.14)
[ 0.559865] msgmni has been set to 1650
[ 0.560982] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.560985] io scheduler noop registered
[ 0.560987] io scheduler deadline registered
[ 0.561000] io scheduler cfq registered (default)
[ 0.561119] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.561233] alloc irq_desc for 40 on node -1
[ 0.561235] alloc kstat_irqs on node -1
[ 0.561255] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X
[ 0.561409] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.561519] alloc irq_desc for 41 on node -1
[ 0.561520] alloc kstat_irqs on node -1
[ 0.561538] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[ 0.561688] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.561797] alloc irq_desc for 42 on node -1
[ 0.561799] alloc kstat_irqs on node -1
[ 0.561815] pcieport 0000:00:16.0: irq 42 for MSI/MSI-X
[ 0.561966] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.561985] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.562072] intel_idle: MWAIT substates: 0x20
[ 0.562074] intel_idle: does not run on family 6 model 23
[ 0.562179] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.562184] ACPI: Power Button [PWRB]
[ 0.562236] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.562239] ACPI: Power Button [PWRF]
[ 0.562592] ACPI: acpi_idle registered with cpuidle
[ 0.562633] Marking TSC unstable due to TSC halts in idle
[ 0.570140] ERST: Table is not found!
[ 0.570246] isapnp: Scanning for PnP cards...
[ 0.570408] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.570511] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.570826] Switching to clocksource hpet
[ 0.575833] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.576940] brd: module loaded
[ 0.577432] loop: module loaded
[ 0.578019] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 0.578023] alloc irq_desc for 20 on node -1
[ 0.578025] alloc kstat_irqs on node -1
[ 0.578031] pata_acpi 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 0.578054] pata_acpi 0000:00:0b.0: setting latency timer to 64
[ 0.578063] pata_acpi 0000:00:0b.0: PCI INT A disabled
[ 0.578475] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19
[ 0.578477] alloc irq_desc for 19 on node -1
[ 0.578479] alloc kstat_irqs on node -1
[ 0.578483] pata_acpi 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19
[ 0.578501] pata_acpi 0000:05:00.0: setting latency timer to 64
[ 0.578511] pata_acpi 0000:05:00.0: PCI INT A disabled
[ 0.578793] Fixed MDIO Bus: probed
[ 0.578824] PPP generic driver version 2.4.2
[ 0.578858] tun: Universal TUN/TAP device driver, 1.6
[ 0.578860] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.578932] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.579344] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 0.579347] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 0.579359] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.579362] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.579394] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.579410] ehci_hcd 0000:00:04.1: debug port 1
[ 0.579418] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.579434] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf9f7ec00
[ 0.592018] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.592123] hub 1-0:1.0: USB hub found
[ 0.592128] hub 1-0:1.0: 6 ports detected
[ 0.592591] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22
[ 0.592594] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
[ 0.592603] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.592605] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.592636] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.592652] ehci_hcd 0000:00:06.1: debug port 1
[ 0.592660] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[ 0.592673] ehci_hcd 0000:00:06.1: irq 22, io mem 0xf9f7e800
[ 0.604019] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 0.604116] hub 2-0:1.0: USB hub found
[ 0.604120] hub 2-0:1.0: 6 ports detected
[ 0.604180] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.604594] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 0.604598] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[ 0.604606] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.604609] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.604643] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.604663] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf9f7f000
[ 0.628725] Freeing initrd memory: 10508k freed
[ 0.662092] hub 3-0:1.0: USB hub found
[ 0.662097] hub 3-0:1.0: 6 ports detected
[ 0.662556] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20
[ 0.662560] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
[ 0.662569] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.662572] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.662603] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.662622] ohci_hcd 0000:00:06.0: irq 20, io mem 0xf9f7d000
[ 0.718582] hub 4-0:1.0: USB hub found
[ 0.718588] hub 4-0:1.0: 6 ports detected
[ 0.718648] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.718726] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 0.718729] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.721473] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.721478] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.721527] mice: PS/2 mouse device common for all mice
[ 0.721629] rtc_cmos 00:07: RTC can wake from S4
[ 0.721660] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.721707] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.721796] device-mapper: uevent: version 1.0.3
[ 0.721936] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.722162] device-mapper: multipath: version 1.1.1 loaded
[ 0.722165] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.722302] EISA: Probing bus 0 at eisa.0
[ 0.722304] EISA: Cannot allocate resource for mainboard
[ 0.722306] Cannot allocate resource for EISA slot 1
[ 0.722308] Cannot allocate resource for EISA slot 2
[ 0.722310] Cannot allocate resource for EISA slot 3
[ 0.722311] Cannot allocate resource for EISA slot 4
[ 0.722313] Cannot allocate resource for EISA slot 5
[ 0.722315] Cannot allocate resource for EISA slot 6
[ 0.722317] Cannot allocate resource for EISA slot 7
[ 0.722318] Cannot allocate resource for EISA slot 8
[ 0.722320] EISA: Detected 0 cards.
[ 0.722680] cpuidle: using governor ladder
[ 0.722723] cpuidle: using governor menu
[ 0.723006] TCP cubic registered
[ 0.723127] NET: Registered protocol family 10
[ 0.723462] lo: Disabled Privacy Extensions
[ 0.723676] NET: Registered protocol family 17
[ 0.723737] Using IPI No-Shortcut mode
[ 0.723809] PM: Resume from disk failed.
[ 0.723819] registered taskstats version 1
[ 0.724131] Magic number: 11:985:245
[ 0.724244] rtc_cmos 00:07: setting system clock to 2011-01-23 20:13:08 UTC (1295813588)
[ 0.724250] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.724252] EDD information not available.
[ 0.923144] isapnp: No Plug & Play device found
[ 0.923168] Freeing unused kernel memory: 688k freed
[ 0.923480] Write protecting the kernel text: 4936k
[ 0.923534] Write protecting the kernel read-only data: 1976k
[ 0.940287] udev[100]: starting version 163
[ 0.967671] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.968152] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 0.968158] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 0.968163] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.976038] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 0.977820] pata_jmicron 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19
[ 0.977859] pata_jmicron 0000:05:00.0: setting latency timer to 64
[ 0.998683] scsi0 : pata_jmicron
[ 1.002575] scsi1 : pata_jmicron
[ 1.002721] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[ 1.002725] ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[ 1.029771] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:23:54:90:fd:15
[ 1.029775] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 1.029798] ahci 0000:00:0b.0: version 3.0
[ 1.029815] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 1.029860] alloc irq_desc for 43 on node -1
[ 1.029862] alloc kstat_irqs on node -1
[ 1.029872] ahci 0000:00:0b.0: irq 43 for MSI/MSI-X
[ 1.029878] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 1.029939] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 1.029942] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs boh
[ 1.029946] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.030273] scsi2 : ahci
[ 1.030391] scsi3 : ahci
[ 1.030503] scsi4 : ahci
[ 1.030604] scsi5 : ahci
[ 1.030710] scsi6 : ahci
[ 1.030804] scsi7 : ahci
[ 1.031003] ata3: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76100 irq 43
[ 1.031006] ata4: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76180 irq 43
[ 1.031009] ata5: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76200 irq 43
[ 1.031011] ata6: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76280 irq 43
[ 1.031014] ata7: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76300 irq 43
[ 1.031016] ata8: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76380 irq 43
[ 1.168960] ata1.01: ATAPI: Optiarc DVD RW AD-7200A, 1.06, max UDMA/66
[ 1.188480] ata1.01: configured for UDMA/66
[ 1.191946] scsi 0:0:1:0: CD-ROM Optiarc DVD RW AD-7200A 1.06 PQ: 0 ANSI: 5
[ 1.196902] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.196906] Uniform CD-ROM driver Revision: 3.20
[ 1.197037] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.197092] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.348026] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.348032] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.348045] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.348057] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.348094] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.348103] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.348779] ata3.00: ATA-8: WDC WD5000AACS-00G8B1, 05.04C05, max UDMA/133
[ 1.348783] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.348826] ata6.00: ATA-8: WDC WD6400AVVS-63H0B1, 05.04C05, max UDMA/133
[ 1.348829] ata6.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.349628] ata3.00: configured for UDMA/133
[ 1.349682] ata6.00: configured for UDMA/133
[ 1.352717] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AACS-0 05.0 PQ: 0 ANSI: 5
[ 1.352890] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.352897] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.352989] sd 2:0:0:0: [sda] Write Protect is off
[ 1.352992] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.353020] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.353061] scsi 5:0:0:0: Direct-Access ATA WDC WD6400AVVS-6 05.0 PQ: 0 ANSI: 5
[ 1.353198] sda:
[ 1.353229] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1.353309] sd 5:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.353398] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.353401] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.353436] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.353587] sdb: sdb1
[ 1.361639] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.364335] sda1 sda2 < sda5 sda6 sda7 >
[ 1.404444] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.464521] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 1.690677] usbcore: registered new interface driver hiddev
[ 1.696560] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input2
[ 1.696654] generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:04.0-3/input0
[ 1.696670] usbcore: registered new interface driver usbhid
[ 1.696672] usbhid: USB HID core driver
[ 1.774566] EXT3-fs: barriers not enabled
[ 1.790631] kjournald starting. Commit interval 5 seconds
[ 1.790653] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 1.988019] usb 4-3: new low speed USB device using ohci_hcd and address 2
[ 2.230981] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:06.0/usb4/4-3/4-3:1.0/input/input3
[ 2.231047] generic-usb 0003:062A:0102.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:06.0-3/input0
[ 2.241615] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:06.0/usb4/4-3/4-3:1.1/input/input4
[ 2.241727] generic-usb 0003:062A:0102.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:06.0-3/input1
[ 30.686862] udev[437]: starting version 163
[ 30.697878] lp: driver loaded but no devices found
[ 30.740119] ACPI: resource nForce2_smbus [io 0x4d00-0x4d3f] conflicts with ACPI region SM00 [??? 0x00004d00-0x00004d3f flags 0x30]
[ 30.740123] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 30.740171] i2c i2c-0: nForce2 SMBus adapter at 0x4e00
[ 30.788481] Adding 6233184k swap on /dev/sda7. Priority:-1 extents:1 across:6233184k
[ 30.811835] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 30.812219] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input5
[ 30.812269] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 30.813737] Linux agpgart interface v0.103
[ 30.817455] parport_pc 00:04: reported by Plug and Play ACPI
[ 30.817505] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 30.835366] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.865387] ppdev: user-space parallel port driver
[ 30.889775] type=1400 audit(1295806418.663:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=695 comm="apparmor_parser"
[ 30.890463] type=1400 audit(1295806418.663:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=695 comm="apparmor_parser"
[ 30.890822] type=1400 audit(1295806418.663:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=695 comm="apparmor_parser"
[ 30.893083] type=1400 audit(1295806418.663:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=719 comm="apparmor_parser"
[ 30.893789] type=1400 audit(1295806418.667:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser"
[ 30.894170] type=1400 audit(1295806418.667:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"
[ 30.895953] nvidia: module license 'NVIDIA' taints kernel.
[ 30.895958] Disabling lock debugging due to kernel taint
[ 30.912693] lp0: using parport0 (interrupt-driven).
[ 30.955131] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 30.955177] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 30.955593] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 30.955598] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 30.955601] hda_intel: Disable MSI for Nvidia chipset
[ 30.955625] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 31.005455] psmouse serio1: ID: 10 00 64
[ 31.314272] EXT3-fs (sda6): using internal journal
[ 31.414414] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 31.752523] type=1400 audit(1295806419.523:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=982 comm="apparmor_parser"
[ 31.753147] type=1400 audit(1295806419.523:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=982 comm="apparmor_parser"
[ 31.753484] type=1400 audit(1295806419.523:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=982 comm="apparmor_parser"
[ 31.755446] type=1400 audit(1295806419.527:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=986 comm="apparmor_parser"
[ 31.822201] alloc irq_desc for 44 on node -1
[ 31.822205] alloc kstat_irqs on node -1
[ 31.822214] forcedeth 0000:00:0a.0: irq 44 for MSI/MSI-X
[ 32.049155] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 21
[ 32.049163] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 21 (level, low) -> IRQ 21
[ 32.049596] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[ 32.049600] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
[ 32.049606] nvidia 0000:03:00.0: setting latency timer to 64
[ 32.049611] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 32.049882] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 33.876715] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 33.876719] apm: disabled - APM is not SMP safe.
[ 34.944918] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 34.944922] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 34.944924] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 34.944925] vboxdrv: the usage of hardware performance counters by
[ 34.944926] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 34.944930] vboxdrv: Found 4 processor cores.
[ 34.945151] vboxdrv: fAsync=0 offMin=0x532 offMax=0x22f2
[ 34.945339] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 34.945341] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).
[ 42.064024] eth0: no IPv6 routers present
[ 389.851594] usb 1-6: USB disconnect, address 3
[ 403.956021] usb 1-6: new high speed USB device using ehci_hcd and address 4


sudo m-a a-i ar5523-source
sudo modprobe ar5523

FATAL: Module ar5523 not found.

[MakisM1]

Ο logari81 εφτιαξε αυτο το .deb για συγκεκριμενο πυρηνα στο Maverick. Δεν νομιζω οτι θα δουλεψει για αλλο πυρηνα η αλλη εκδοση της διανομης (εσυ εχεις την 9.04).

Αν και εμενα δουλεψε, ειχε πολλα προβληματα και μετα απο αλλαγη πυρηνα δεν ειχα τον καιρο να το συνεχισω, αλλα δεν ηθελα και να τον παιδεψω αλλο...

Φιλικα

ΜακηςΜ

[logari81]

Το συγχώνευσα με το προηγούμενο θέμα που είχες ανοιξει. Απότι φαίνεται ο συγκεκριμένος οδηγός προκαλεί διάφορα προβλήματα σταθερότητας στο σύστημα. Το να τον εγκαταστησει καποιος εχει νόημα μόνο αν θελει να ασχοληθεί περισσότερο και να επικοινωνήσει με τους δημιουργούς του οδηγού για debugging.

[statik]

Δηλαδη να παω να παρω αλλο wifi modem? (eχω to 10.10).
Και αν ναι, ποια ξερω οτι θα δουλεψουν 100% στο ubuntu?

[MakisM1]

Δηλαδη να παω να παρω αλλο wifi modem? (eχω to 10.10).
Και αν ναι, ποια ξερω οτι θα δουλεψουν 100% στο ubuntu?

Ναι! Εγω προσφατα πηρα ενα D-Link

Κώδικας: Επιλογή όλων

Bus 001 Device 006: ID 07d1:3c0f D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.E) [Ralink RT2870]


και δουλευει μια χαρα.