Προβλημα με συνδεση στο Internet

[notorious]

καλησπερα σας
ειμαι πρωταρης στην κοινοτητα του ubuntu και αντιμετωπιζω ενα προβλημα με την συνδεση στο διαδικτυο (wired)
Η εγκατασταση(Ubuntu 11.04) εχει γινει σε παλαιο συστημα (realtek network card) και παρα τις προσπαθειες μου το os δεν συνδεεται με τιποτα
To dchp ειναι ενεργο στο TG585 v7 και εχω προσπαθησει τοσο auto οσο kai manual στο ipv4
επισης να αναφερω οτι το συστημα ειναι dualboot με xp(εκει ολα δουλευουν ρολοι)
Ευχαριστω για καθε σας βοηθεια

[simosx]

ειμαι πρωταρης στην κοινοτητα του ubuntu και αντιμετωπιζω ενα προβλημα με την συνδεση στο διαδικτυο (wired)
Η εγκατασταση(Ubuntu 11.04) εχει γινει σε παλαιο συστημα (realtek network card) και παρα τις προσπαθειες μου το os δεν συνδεεται με τιποτα
To dchp ειναι ενεργο στο TG585 v7 και εχω προσπαθησει τοσο auto οσο kai manual στο ipv4
επισης να αναφερω οτι το συστημα ειναι dualboot με xp(εκει ολα δουλευουν ρολοι)

Καλώς ήρθες στο φόρουμ!
Δες στο viewtopic.php?f=6&t=15460 για το πως μπορείς να φτιάξεις την «υπογραφή» σου, όπου θα συμπεριλάβει
αυτόματα και τα στοιχεία για την κάρτα δικτύου, και θα δούμε πως μπορούμε να βοηθήσουμε.

[notorious]

για το πως μπορείς να φτιάξεις την «υπογραφή» σου, όπου θα συμπεριλάβει
αυτόματα και τα στοιχεία για την κάρτα δικτύου, και θα δούμε πως μπορούμε να βοηθήσουμε.

ελπιζω να μην ξεχασα κατι

[simosx]

για το πως μπορείς να φτιάξεις την «υπογραφή» σου, όπου θα συμπεριλάβει
αυτόματα και τα στοιχεία για την κάρτα δικτύου, και θα δούμε πως μπορούμε να βοηθήσουμε.

ελπιζω να μην ξεχασα κατι

Μπορείς στην υπογραφή να αναφέρεις για τις γνώσεις σου σε Linux, Προγραμματισμό και Ελληνικά .

Βρήκα κάτι σχετικό, http://ubuntuforums.org/showthread.php?t=1625864
Οπότε μπορείς να γράψεις εδώ το αποτέλεσμα της εντολής dmesg;
το βάζεις μέσα σε [cοde][/code] για να φανεί καλά.

[notorious]

λιγο μεγαλο βγηκε αλλα αν δεν ξερεις απο linux

Κώδικας: Επιλογή όλων

[ 0.278074] ACPI: Power Button [PWRF]
[ 0.278222] ACPI: Fan [FAN] (on)
[ 0.278505] ACPI: acpi_idle registered with cpuidle
[ 0.278584] Marking TSC unstable due to TSC halts in idle
[ 0.282225] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.282239] ACPI: Thermal Zone [THRM] (69 C)
[ 0.282374] ERST: Table is not found!
[ 0.282836] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.303372] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.308595] isapnp: Scanning for PnP cards...
[ 0.397184] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.489433] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.529580] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.592808] Linux agpgart interface v0.103
[ 0.593005] agpgart: Detected VIA P4X266 chipset
[ 0.604535] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 0.612509] brd: module loaded
[ 0.614344] loop: module loaded
[ 0.614744] i2c-core: driver [adp5520] using legacy suspend method
[ 0.614754] i2c-core: driver [adp5520] using legacy resume method
[ 0.615963] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.615975] PCI: setting IRQ 11 as level-triggered
[ 0.615990] pata_acpi 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.616005] pata_acpi 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11
[ 0.620613] pata_acpi 0000:00:11.1: PCI INT A disabled
[ 0.621735] Fixed MDIO Bus: probed
[ 0.621857] PPP generic driver version 2.4.2
[ 0.622096] tun: Universal TUN/TAP device driver, 1.6
[ 0.622103] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.622418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.623079] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 0.623090] PCI: setting IRQ 5 as level-triggered
[ 0.623104] ehci_hcd 0000:00:09.2: PCI INT C -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 0.623171] ehci_hcd 0000:00:09.2: EHCI Host Controller
[ 0.623404] ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1
[ 0.623533] ehci_hcd 0000:00:09.2: irq 5, io mem 0xe8000000
[ 0.632334] ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00
[ 0.632889] hub 1-0:1.0: USB hub found
[ 0.632907] hub 1-0:1.0: 4 ports detected
[ 0.633121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.633182] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.634000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.634015] uhci_hcd 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.634040] uhci_hcd 0000:00:09.0: UHCI Host Controller
[ 0.634264] uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
[ 0.634329] uhci_hcd 0000:00:09.0: irq 11, io base 0x0000d000
[ 0.634766] hub 2-0:1.0: USB hub found
[ 0.634782] hub 2-0:1.0: 2 ports detected
[ 0.635625] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.635637] PCI: setting IRQ 10 as level-triggered
[ 0.635652] uhci_hcd 0000:00:09.1: PCI INT B -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 0.635676] uhci_hcd 0000:00:09.1: UHCI Host Controller
[ 0.635901] uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3
[ 0.635967] uhci_hcd 0000:00:09.1: irq 10, io base 0x0000d400
[ 0.641016] hub 3-0:1.0: USB hub found
[ 0.641039] hub 3-0:1.0: 2 ports detected
[ 0.641251] uhci_hcd 0000:00:11.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 0.641281] uhci_hcd 0000:00:11.2: UHCI Host Controller
[ 0.641460] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4
[ 0.641520] uhci_hcd 0000:00:11.2: irq 5, io base 0x0000e000
[ 0.641974] hub 4-0:1.0: USB hub found
[ 0.641992] hub 4-0:1.0: 2 ports detected
[ 0.642186] uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 0.642218] uhci_hcd 0000:00:11.3: UHCI Host Controller
[ 0.642402] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5
[ 0.642460] uhci_hcd 0000:00:11.3: irq 5, io base 0x0000e400
[ 0.642866] hub 5-0:1.0: USB hub found
[ 0.642884] hub 5-0:1.0: 2 ports detected
[ 0.643083] uhci_hcd 0000:00:11.4: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 0.643110] uhci_hcd 0000:00:11.4: UHCI Host Controller
[ 0.643303] uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 6
[ 0.643361] uhci_hcd 0000:00:11.4: irq 5, io base 0x0000e800
[ 0.643783] hub 6-0:1.0: USB hub found
[ 0.643800] hub 6-0:1.0: 2 ports detected
[ 0.648588] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.649132] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.649170] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.649685] mousedev: PS/2 mouse device common for all mice
[ 0.650328] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.650380] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.650708] device-mapper: uevent: version 1.0.3
[ 0.651016] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.656410] device-mapper: multipath: version 1.2.0 loaded
[ 0.656430] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.656873] EISA: Probing bus 0 at eisa.0
[ 0.656910] Cannot allocate resource for EISA slot 4
[ 0.656936] EISA: Detected 0 cards.
[ 0.657281] cpuidle: using governor ladder
[ 0.657387] cpuidle: using governor menu
[ 0.658166] TCP cubic registered
[ 0.658582] NET: Registered protocol family 10
[ 0.660140] NET: Registered protocol family 17
[ 0.660239] Registering the dns_resolver key type
[ 0.660376] Using IPI No-Shortcut mode
[ 0.660782] PM: Hibernation image not present or could not be loaded.
[ 0.660818] registered taskstats version 1
[ 0.661240] Magic number: 11:344:23
[ 0.661356] ehci_hcd 0000:00:09.2: hash matches
[ 0.661456] rtc_cmos 00:04: setting system clock to 2011-05-31 10:00:30 UTC (1306836030)
[ 0.661467] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.661472] EDD information not available.
[ 0.959838] isapnp: No Plug & Play device found
[ 1.076322] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 1.244455] hub 4-1:1.0: USB hub found
[ 1.245715] hub 4-1:1.0: 4 ports detected
[ 1.364840] usb 6-2: new full speed USB device using uhci_hcd and address 2
[ 1.507937] Freeing initrd memory: 12520k freed
[ 1.539321] usb 6-2: not running at top speed; connect to a high speed hub
[ 1.539558] Freeing unused kernel memory: 700k freed
[ 1.541446] Write protecting the kernel text: 5192k
[ 1.541529] Write protecting the kernel read-only data: 2148k
[ 1.638258] <30>udev[60]: starting version 167
[ 1.793756] usb 4-1.1: new full speed USB device using uhci_hcd and address 3
[ 1.930894] hub 4-1.1:1.0: USB hub found
[ 1.932742] hub 4-1.1:1.0: 3 ports detected
[ 2.213773] usb 4-1.1.2: new full speed USB device using uhci_hcd and address 4
[ 2.256782] pata_via 0000:00:11.1: version 0.3.4
[ 2.256828] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.256842] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11
[ 2.261010] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.263287] Floppy drive(s): fd0 is 1.44M
[ 2.283923] scsi0 : pata_via
[ 2.292250] scsi1 : pata_via
[ 2.316929] FDC 0 is a post-1991 82077
[ 2.337253] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14
[ 2.337266] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15
[ 2.353391] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.418086] usbcore: registered new interface driver uas
[ 2.441760] usb 4-1.1.3: new full speed USB device using uhci_hcd and address 5
[ 2.509545] ata1.00: ATA-5: WDC WD300BB-00CCB0, 22.04A22, max UDMA/100
[ 2.509557] ata1.00: 58633344 sectors, multi 16: LBA
[ 2.509581] ata1.01: ATAPI: _NEC DVD_RW ND-3500AG, 2.1B, max UDMA/33
[ 2.525445] ata1.00: configured for UDMA/100
[ 2.532437] ata1.01: configured for UDMA/33
[ 2.533038] scsi 0:0:0:0: Direct-Access ATA WDC WD300BB-00CC 22.0 PQ: 0 ANSI: 5
[ 2.533654] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.535233] scsi 0:0:1:0: CD-ROM _NEC DVD_RW ND-3500AG 2.1B PQ: 0 ANSI: 5
[ 2.536951] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.536968] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.537405] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.538021] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.538574] sd 0:0:0:0: [sda] 58633344 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 2.538734] sd 0:0:0:0: [sda] Write Protect is off
[ 2.538746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.538813] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.563092] sda: sda1
[ 2.564133] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.789533] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.789669] 8139too 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 2.801710] input: Microsoft Microsoft® Wireless Entertainment Keyboard 7000 as /devices/pci0000:00/0000:00:11.2/usb4/4-1/4-1.1/4-1.1.2/4-1.1.2:1.0/input/input2
[ 2.804196] generic-usb 0003:045E:0717.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Wireless Entertainment Keyboard 7000] on usb-0000:00:11.2-1.1.2/input0
[ 2.833130] input: Microsoft Microsoft® Wireless Laser Mouse 8000 as /devices/pci0000:00/0000:00:11.2/usb4/4-1/4-1.1/4-1.1.3/4-1.1.3:1.0/input/input3
[ 2.838146] Initializing USB Mass Storage driver...
[ 2.840295] generic-usb 0003:045E:0714.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Wireless Laser Mouse 8000] on usb-0000:00:11.2-1.1.3/input0
[ 2.841603] usbcore: registered new interface driver usbhid
[ 2.841614] usbhid: USB HID core driver
[ 2.848992] scsi2 : usb-storage 6-2:1.0
[ 2.856433] usbcore: registered new interface driver usb-storage
[ 2.856446] USB Mass Storage support registered.
[ 2.863870] 8139too 0000:00:0a.0: eth0: RealTek RTL8139 at 0xd800, 00:c1:26:01:11:e1, IRQ 10
[ 3.523279] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.857828] scsi 2:0:0:0: Direct-Access KINGSTON DT 101 G2 1.00 PQ: 0 ANSI: 2
[ 3.859592] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.863619] sd 2:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 3.866596] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.866607] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.872740] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.872754] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.891599] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.891612] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.720906] sdb: sdb1
[ 4.739633] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.739648] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.739660] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 20.686931] <30>udev[284]: starting version 167
[ 21.071686] lp: driver loaded but no devices found
[ 21.615649] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.351958] type=1400 audit(1306850452.184:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=381 comm="apparmor_parser"
[ 22.355423] type=1400 audit(1306850452.188:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=381 comm="apparmor_parser"
[ 22.361346] type=1400 audit(1306850452.196:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=381 comm="apparmor_parser"
[ 22.416911] parport_pc 00:0a: reported by Plug and Play ACPI
[ 22.417030] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 22.612931] lp0: using parport0 (interrupt-driven).
[ 22.723917] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 806kHz
[ 24.270021] irda_init()
[ 24.270075] NET: Registered protocol family 23
[ 25.570284] [drm] Initialized drm 1.1.0 20060810
[ 27.127705] ppdev: user-space parallel port driver
[ 27.797749] nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.856781] [drm] nouveau 0000:01:00.0: Detected an NV 0 generation card (0x20154000)
[ 27.857236] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 27.894938] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 27.895396] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 27.895403] [drm] nouveau 0000:01:00.0: BMP version 2.1
[ 27.895411] [drm] nouveau 0000:01:00.0: Bios version 02.05.13.03
[ 27.902723] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006
[ 27.985347] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[ 27.985376] [drm] nouveau 0000:01:00.0: c: memory 143MHz core 125MHz
[ 27.985601] [TTM] Zone kernel: Available graphics memory: 254000 kiB.
[ 27.985609] [TTM] Initializing pool allocator.
[ 27.985651] [drm] nouveau 0000:01:00.0: Detected 32MiB VRAM
[ 27.988260] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 27.988304] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 27.988409] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 27.988418] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 27.988519] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 28.041859] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006
[ 28.098826] i2c-core: driver [ch7006] using legacy suspend method
[ 28.098838] i2c-core: driver [ch7006] using legacy resume method
[ 28.111249] ch7006 1-0075: Detected version ID: 50
[ 28.248563] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 28.248741] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 28.414067] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 28.414082] [drm] No driver support for vblank timestamp query.
[ 28.422221] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 28.422235] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1)
[ 28.802983] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x44000, bo dcabb400
[ 28.885304] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1)
[ 28.963075] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 28.963091] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 28.963654] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1)
[ 28.973280] Console: switching to colour frame buffer device 160x64
[ 28.979860] fb0: nouveaufb frame buffer device
[ 28.979868] drm: registered panic notifier
[ 28.986481] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 29.587605] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k
[ 29.821503] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 31.056680] type=1400 audit(1306850460.892:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=673 comm="apparmor_parser"
[ 31.149837] type=1400 audit(1306850460.984:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=679 comm="apparmor_parser"
[ 31.151552] type=1400 audit(1306850460.984:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=679 comm="apparmor_parser"
[ 31.159406] type=1400 audit(1306850460.992:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=679 comm="apparmor_parser"
[ 31.199070] type=1400 audit(1306850461.032:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=681 comm="apparmor_parser"
[ 31.215479] type=1400 audit(1306850461.048:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=681 comm="apparmor_parser"
[ 31.528704] type=1400 audit(1306850461.364:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=682 comm="apparmor_parser"
[ 31.555158] type=1400 audit(1306850461.388:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=682 comm="apparmor_parser"
[ 31.570993] type=1400 audit(1306850461.404:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=682 comm="apparmor_parser"
[ 31.629181] type=1400 audit(1306850461.464:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=688 comm="apparmor_parser"
[ 33.398835] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 35.316860] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[ 43.289358] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[ 44.192112] eth0: no IPv6 routers present
[ 45.824063] ------------[ cut here ]------------
[ 45.824095] WARNING: at /build/buildd/linux-2.6.38/net/sched/sch_generic.c:256 dev_watchdog+0x213/0x220()
[ 45.824103] Hardware name: P4X266-8233
[ 45.824109] NETDEV WATCHDOG: eth0 (8139too): transmit queue 0 timed out
[ 45.824116] Modules linked in: binfmt_misc snd_via82xx ch7006 snd_ac97_codec ac97_bus snd_pcm nouveau snd_page_alloc snd_mpu401_uart snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq ttm ppdev snd_timer drm_kms_helper snd_seq_device i2c_viapro via_ircc drm joydev snd psmouse irda ns558 i2c_algo_bit soundcore serio_raw video gameport parport_pc crc_ccitt shpchp lp parport usb_storage 8139too usbhid hid uas floppy 8139cp pata_via
[ 45.824211] Pid: 0, comm: swapper Not tainted 2.6.38-8-generic #42-Ubuntu
[ 45.824218] Call Trace:
[ 45.824236] [<c104f912>] ? warn_slowpath_common+0x72/0xa0
[ 45.824248] [<c144a073>] ? dev_watchdog+0x213/0x220
[ 45.824258] [<c144a073>] ? dev_watchdog+0x213/0x220
[ 45.824269] [<c104f9e3>] ? warn_slowpath_fmt+0x33/0x40
[ 45.824280] [<c144a073>] ? dev_watchdog+0x213/0x220
[ 45.824291] [<c1069231>] ? __queue_work+0xe1/0x360
[ 45.824304] [<c105c76b>] ? call_timer_fn+0x2b/0xe0
[ 45.824318] [<c15097cd>] ? _raw_spin_lock+0xd/0x10
[ 45.824330] [<c1449e60>] ? dev_watchdog+0x0/0x220
[ 45.824339] [<c105daa9>] ? run_timer_softirq+0xe9/0x1e0
[ 45.824348] [<c1449e60>] ? dev_watchdog+0x0/0x220
[ 45.824358] [<c1056622>] ? __do_softirq+0x82/0x170
[ 45.824368] [<c10565a0>] ? __do_softirq+0x0/0x170
[ 45.824374] <IRQ> [<c10567ed>] ? irq_exit+0x6d/0x80
[ 45.824393] [<c15107ab>] ? do_IRQ+0x4b/0xc0
[ 45.824404] [<c1003670>] ? common_interrupt+0x30/0x38
[ 45.824415] [<c10700d8>] ? do_cpu_nanosleep+0x38/0x1b0
[ 45.824429] [<c12e8db4>] ? arch_local_irq_enable+0x5/0xb
[ 45.824439] [<c12e9827>] ? acpi_idle_enter_simple+0x105/0x13d
[ 45.824453] [<c14061fd>] ? cpuidle_idle_call+0x7d/0x160
[ 45.824462] [<c10019ca>] ? cpu_idle+0x8a/0xc0
[ 45.824474] [<c1038d2e>] ? complete+0x4e/0x60
[ 45.824488] [<c14f0d2d>] ? rest_init+0x5d/0x70
[ 45.824501] [<c178d7e1>] ? start_kernel+0x35f/0x366
[ 45.824511] [<c178d3d5>] ? pass_all_bootoptions+0x0/0xa
[ 45.824522] [<c178d0e0>] ? i386_start_kernel+0xe0/0xe8
[ 45.824529] ---[ end trace 8294fc17bc34ed43 ]---
[ 48.659906] show_signal_msg: 6 callbacks suppressed
[ 48.659921] unity_support_t[1232]: segfault at 4 ip 0039b496 sp bfc2f5e0 error 4 in nouveau_vieux_dri.so[384000+34000]
[ 48.734710] unity_support_t[1234]: segfault at 4 ip 001c9496 sp bfb6f770 error 4 in nouveau_vieux_dri.so[1b2000+34000]
[ 48.843243] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 60.843208] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 72.843188] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 84.843532] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 96.844886] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 108.843359] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 120.843427] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 132.843296] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 144.843252] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 164.824169] usb 6-2: USB disconnect, address 2
[ 203.628072] usb 6-2: new full speed USB device using uhci_hcd and address 3
[ 203.773127] usb 6-2: not running at top speed; connect to a high speed hub
[ 203.806883] scsi3 : usb-storage 6-2:1.0
[ 204.808247] scsi 3:0:0:0: Direct-Access KINGSTON DT 101 G2 1.00 PQ: 0 ANSI: 2
[ 204.816844] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 204.821284] sd 3:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 204.824252] sd 3:0:0:0: [sdb] Write Protect is off
[ 204.824267] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 204.830372] sd 3:0:0:0: [sdb] No Caching mode page present
[ 204.830391] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 204.851185] sd 3:0:0:0: [sdb] No Caching mode page present
[ 204.851203] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 205.680484] sdb: sdb1
[ 205.697265] sd 3:0:0:0: [sdb] No Caching mode page present
[ 205.697284] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 205.697298] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 345.880161] usb 6-2: USB disconnect, address 3
[ 731.144075] usb 6-2: new full speed USB device using uhci_hcd and address 4
[ 731.289128] usb 6-2: not running at top speed; connect to a high speed hub
[ 731.329007] scsi4 : usb-storage 6-2:1.0
[ 732.332246] scsi 4:0:0:0: Direct-Access KINGSTON DT 101 G2 1.00 PQ: 0 ANSI: 2
[ 732.341458] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 732.345306] sd 4:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 732.348432] sd 4:0:0:0: [sdb] Write Protect is off
[ 732.348448] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 732.355323] sd 4:0:0:0: [sdb] No Caching mode page present
[ 732.355343] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 732.375297] sd 4:0:0:0: [sdb] No Caching mode page present
[ 732.375315] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 733.206476] sdb: sdb1
[ 733.223331] sd 4:0:0:0: [sdb] No Caching mode page present
[ 733.223349] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 733.223361] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 965.880159] usb 6-2: USB disconnect, address 4
[ 1026.856124] usb 6-2: new full speed USB device using uhci_hcd and address 5
[ 1027.001133] usb 6-2: not running at top speed; connect to a high speed hub
[ 1027.044863] scsi5 : usb-storage 6-2:1.0
[ 1028.050512] scsi 5:0:0:0: Direct-Access KINGSTON DT 101 G2 1.00 PQ: 0 ANSI: 2
[ 1028.059723] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1028.064316] sd 5:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 1028.067305] sd 5:0:0:0: [sdb] Write Protect is off
[ 1028.067319] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1028.073314] sd 5:0:0:0: [sdb] No Caching mode page present
[ 1028.073332] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1028.092291] sd 5:0:0:0: [sdb] No Caching mode page present
[ 1028.092309] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1028.923485] sdb: sdb1
[ 1028.945334] sd 5:0:0:0: [sdb] No Caching mode page present
[ 1028.945350] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1028.945361] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 1274.392165] usb 6-2: USB disconnect, address 5
[ 2182.043576] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2529.325040] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 3261.944071] usb 6-2: new full speed USB device using uhci_hcd and address 6
[ 3262.089118] usb 6-2: not running at top speed; connect to a high speed hub
[ 3262.121899] scsi6 : usb-storage 6-2:1.0
[ 3263.124246] scsi 6:0:0:0: Direct-Access KINGSTON DT 101 G2 1.00 PQ: 0 ANSI: 2
[ 3263.133455] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3263.138244] sd 6:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 3263.141252] sd 6:0:0:0: [sdb] Write Protect is off
[ 3263.141267] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3263.147303] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3263.147321] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3263.169849] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3263.169867] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3264.021473] sdb: sdb1
[ 3264.038302] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3264.038320] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3264.038332] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3402.232158] usb 6-2: USB disconnect, address 6
[ 3564.516100] usb 6-2: new full speed USB device using uhci_hcd and address 7
[ 3564.661129] usb 6-2: not running at top speed; connect to a high speed hub
[ 3564.702015] scsi7 : usb-storage 6-2:1.0
[ 3565.704244] scsi 7:0:0:0: Direct-Access KINGSTON DT 101 G2 1.00 PQ: 0 ANSI: 2
[ 3565.713431] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 3565.718304] sd 7:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 3565.721307] sd 7:0:0:0: [sdb] Write Protect is off
[ 3565.721324] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3565.727323] sd 7:0:0:0: [sdb] No Caching mode page present
[ 3565.727344] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 3565.747648] sd 7:0:0:0: [sdb] No Caching mode page present
[ 3565.747666] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 3566.598476] sdb: sdb1
[ 3566.618321] sd 7:0:0:0: [sdb] No Caching mode page present
[ 3566.618338] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 3566.618350] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 3732.302947] FAT: Filesystem error (dev sdb1)
[ 3732.302962] fat_free_clusters: deleting FAT entry beyond EOF
[ 3732.302971] FAT: Filesystem has been set read-only
[ 3757.120164] usb 6-2: USB disconnect, address 7
[ 3757.230802] FAT: Directory bread(block 30560) failed
[ 3757.231121] FAT: Directory bread(block 30561) failed
[ 3757.243948] FAT: Directory bread(block 30562) failed
[ 3757.262785] FAT: Directory bread(block 30563) failed
[ 3757.262946] FAT: Directory bread(block 30564) failed
[ 3757.262991] FAT: Directory bread(block 30565) failed
[ 3757.263030] FAT: Directory bread(block 30566) failed
[ 3757.263067] FAT: Directory bread(block 30567) failed
[ 3757.263219] FAT: Directory bread(block 30560) failed
[ 3757.263259] FAT: Directory bread(block 30561) failed
[ 3757.263295] FAT: Directory bread(block 30562) failed
[ 3757.263331] FAT: Directory bread(block 30563) failed
[ 3757.263367] FAT: Directory bread(block 30564) failed
[ 3757.263402] FAT: Directory bread(block 30565) failed
[ 3757.263437] FAT: Directory bread(block 30566) failed
[ 3757.263472] FAT: Directory bread(block 30567) failed
[ 3757.263872] FAT: Directory bread(block 30560) failed
[ 3757.263915] FAT: Directory bread(block 30561) failed
[ 3757.263951] FAT: Directory bread(block 30562) failed
[ 3757.263986] FAT: Directory bread(block 30563) failed
[ 3757.265459] FAT: Directory bread(block 30564) failed
[ 3757.265588] FAT: Directory bread(block 30565) failed
[ 3757.265628] FAT: Directory bread(block 30566) failed
[ 3757.265665] FAT: Directory bread(block 30567) failed
[ 3858.144100] usb 6-2: new full speed USB device using uhci_hcd and address 8
[ 3858.289128] usb 6-2: not running at top speed; connect to a high speed hub
[ 3858.326346] scsi8 : usb-storage 6-2:1.0
[ 3859.332242] scsi 8:0:0:0: Direct-Access KINGSTON DT 101 G2 1.00 PQ: 0 ANSI: 2
[ 3859.341419] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 3859.346310] sd 8:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 3859.349599] sd 8:0:0:0: [sdb] Write Protect is off
[ 3859.349616] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3859.356308] sd 8:0:0:0: [sdb] No Caching mode page present
[ 3859.356325] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 3859.376551] sd 8:0:0:0: [sdb] No Caching mode page present
[ 3859.376570] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 3860.226531] sdb: sdb1
[ 3860.247354] sd 8:0:0:0: [sdb] No Caching mode page present
[ 3860.247371] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 3860.247383] sd 8:0:0:0: [sdb] Attached SCSI removable disk

[simosx]

Κώδικας: Επιλογή όλων

[ 45.824063] ------------[ cut here ]------------
[ 45.824095] WARNING: at /build/buildd/linux-2.6.38/net/sched/sch_generic.c:256 dev_watchdog+0x213/0x220()
[ 45.824103] Hardware name: P4X266-8233
[ 45.824109] NETDEV WATCHDOG: eth0 (8139too): transmit queue 0 timed out
[ 45.824116] Modules linked in: binfmt_misc snd_via82xx ch7006 snd_ac97_codec ac97_bus snd_pcm nouveau snd_page_alloc snd_mpu401_uart snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq ttm ppdev snd_timer drm_kms_helper snd_seq_device i2c_viapro via_ircc drm joydev snd psmouse irda ns558 i2c_algo_bit soundcore serio_raw video gameport parport_pc crc_ccitt shpchp lp parport usb_storage 8139too usbhid hid uas floppy 8139cp pata_via
[ 45.824211] Pid: 0, comm: swapper Not tainted 2.6.38-8-generic #42-Ubuntu
[ 45.824218] Call Trace:
[ 45.824236] [<c104f912>] ? warn_slowpath_common+0x72/0xa0
[ 45.824248] [<c144a073>] ? dev_watchdog+0x213/0x220
[ 45.824258] [<c144a073>] ? dev_watchdog+0x213/0x220
[ 45.824269] [<c104f9e3>] ? warn_slowpath_fmt+0x33/0x40
[ 45.824280] [<c144a073>] ? dev_watchdog+0x213/0x220
[ 45.824291] [<c1069231>] ? __queue_work+0xe1/0x360
[ 45.824304] [<c105c76b>] ? call_timer_fn+0x2b/0xe0
[ 45.824318] [<c15097cd>] ? _raw_spin_lock+0xd/0x10
[ 45.824330] [<c1449e60>] ? dev_watchdog+0x0/0x220
[ 45.824339] [<c105daa9>] ? run_timer_softirq+0xe9/0x1e0
[ 45.824348] [<c1449e60>] ? dev_watchdog+0x0/0x220
[ 45.824358] [<c1056622>] ? __do_softirq+0x82/0x170
[ 45.824368] [<c10565a0>] ? __do_softirq+0x0/0x170
[ 45.824374] <IRQ> [<c10567ed>] ? irq_exit+0x6d/0x80
[ 45.824393] [<c15107ab>] ? do_IRQ+0x4b/0xc0
[ 45.824404] [<c1003670>] ? common_interrupt+0x30/0x38
[ 45.824415] [<c10700d8>] ? do_cpu_nanosleep+0x38/0x1b0
[ 45.824429] [<c12e8db4>] ? arch_local_irq_enable+0x5/0xb
[ 45.824439] [<c12e9827>] ? acpi_idle_enter_simple+0x105/0x13d
[ 45.824453] [<c14061fd>] ? cpuidle_idle_call+0x7d/0x160
[ 45.824462] [<c10019ca>] ? cpu_idle+0x8a/0xc0
[ 45.824474] [<c1038d2e>] ? complete+0x4e/0x60
[ 45.824488] [<c14f0d2d>] ? rest_init+0x5d/0x70
[ 45.824501] [<c178d7e1>] ? start_kernel+0x35f/0x366
[ 45.824511] [<c178d3d5>] ? pass_all_bootoptions+0x0/0xa
[ 45.824522] [<c178d0e0>] ? i386_start_kernel+0xe0/0xe8
[ 45.824529] ---[ end trace 8294fc17bc34ed43 ]---
[ 48.659906] show_signal_msg: 6 callbacks suppressed

Αυτό ήταν σφάλμα πυρήνα, για την κάρτα δικτύου. Θέλει αναφορά σφάλματος στο launchpad.
Για δώσε το αποτέλεσμα της εντολής

Κώδικας: Επιλογή όλων

sudo lshw -C network


Κώδικας: Επιλογή όλων


[ 48.659921] unity_support_t[1232]: segfault at 4 ip 0039b496 sp bfc2f5e0 error 4 in nouveau_vieux_dri.so[384000+34000]
[ 48.734710] unity_support_t[1234]: segfault at 4 ip 001c9496 sp bfb6f770 error 4 in nouveau_vieux_dri.so[1b2000+34000]

Κάποιο σφάλμα σε σχέση με την κάρτα γραφικών. Το πρόβλημα είναι σε βοηθητικό αρχείο, οπότε μπορεί να λειτουργεί ο υπολογιστής μια χαρά.

Κώδικας: Επιλογή όλων


[ 3566.618350] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 3732.302947] FAT: Filesystem error (dev sdb1)
[ 3732.302962] fat_free_clusters: deleting FAT entry beyond EOF
[ 3732.302971] FAT: Filesystem has been set read-only
[ 3757.120164] usb 6-2: USB disconnect, address 7
[ 3757.230802] FAT: Directory bread(block 30560) failed
[ 3757.231121] FAT: Directory bread(block 30561) failed

Πρόβλημα με ένα στικάκι (μάλλον). Εδώ απλά πας στο Disk Utility και επιλέγεις αποπροσάρτηση και μετά διαμόρφωση (για το στικάκι), και έφτιαξε!

[notorious]

η καρτα γραφικων δεν μου κανει νερα
η εντολη που μου εδωσες μου διδει

Κώδικας: Επιλογή όλων


description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: a
bus info: pci@0000:00:0a.0
logical name: eth0
version: 10
serial: 00:c1:26:01:11:e1
size: 10Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half ip=192.168.1.69 latency=32 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s
resources: irq:10 ioport:d800(size=256) memory:e8001000-e80010ff


[notorious]

To ελυσα το προβλημα που ειχα οποτε παρακαλω τους διαχειριστες να κλειδωσουν το παρον

[Epirotes]

Καλό θα ήταν: 1. να πατήσεις το πράσινο ν ώστε αν φαίνεται το θέμα ως επιλυμένο και 2. να μας πεις και πως ακριβώς λύθηκε, ώστε να βοηθηθού κι άλλοι με παρόμοιο πρόβλημα. Επίσης, επιλυμένα θέματα δεν κλειδώνουν ποτέ. Κλειδώνουμε θέματα όταν ξεφεύγουν από τους σκοπούς του φόρουμ ή παραβιάζουν τους όρους χρήσης.