πρόβλημα usb wireless

[billver]

έχω αγοράσει ενα usb wireless --> http://www.you.gr/b2c_iqshop/b2c/pd.do?pg=7220037E3A722843BD437AED5E39311D&pa=5884BB323DCAD0468FF1702CEA1FD684

έχω ένα πρόβλημα ενώ το αναγνωρίζει κανονικά μετά από κάποιο διάστημα μερικών λεπτών μου το πετάει έξω δεν το βλέπω καν στις συνδέσεις δικτύου. τι λέτε να φταίει?

[vagrale13]

Για να γνωριζουν περισσοτερες πληροφοριες τα μελη σχετικα με το προβλημα σου, και να ειναι σε θεση να σε βοηθησουν,
ανοιξε το τερματικο, και δωσε και τα αποτελεσματα των εντολων

Κώδικας: Επιλογή όλων

lsusb
lsmod
dmesg

[billver]

lsusb

Κώδικας: Επιλογή όλων

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bc2:3000 Seagate RSS LLC
Bus 002 Device 002: ID 045e:0734 Microsoft Corp. Wireless Optical Desktop 700
Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 001 Device 005: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287]

lsmod

Κώδικας: Επιλογή όλων

Module Size Used by
ath9k_htc 43106 0
ath9k_common 12610 1 ath9k_htc
ath9k_hw 250420 2 ath9k_htc,ath9k_common
ath 17181 2 ath9k_htc,ath9k_hw
ppdev 12651 0
lp 12894 0
mperf 12421 0
speedstep_lib 12570 0
cpufreq_userspace 12520 0
cpufreq_conservative 12987 0
cpufreq_powersave 12422 0
cpufreq_stats 12642 0
bnep 17301 2
rfcomm 28494 0
bluetooth 94075 8 bnep,rfcomm
binfmt_misc 12802 1
fuse 52075 3
loop 17841 0
dm_crypt 17919 0
dm_mod 56921 1 dm_crypt
snd_hda_codec_hdmi 26009 4
rc_winfast 12372 0
tuner_simple 17036 1
tuner_types 12305 1 tuner_simple
tda9887 12581 1
joydev 12957 0
tda8290 17118 0
ir_lirc_codec 12700 0
lirc_dev 12925 1 ir_lirc_codec
tea5767 12736 0
ir_sony_decoder 12403 0
snd_hda_codec_cmedia 13091 1
ir_jvc_decoder 12435 0
ir_rc6_decoder 12426 0
snd_hda_intel 21860 2
snd_hda_codec 58350 3 snd_hda_codec_hdmi,snd_hda_codec_cmedia,snd_hda_intel
ir_rc5_decoder 12401 0
snd_hwdep 12936 1 snd_hda_codec
nvidia 10220216 40
tuner 17257 2
ir_nec_decoder 12435 0
snd_pcm_oss 36394 0
snd_mixer_oss 17713 1 snd_pcm_oss
snd_pcm 53284 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm_oss
cx8800 26926 0
cx88xx 67461 1 cx8800
rc_core 18129 9 rc_winfast,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,cx88xx
i2c_algo_bit 12722 1 cx88xx
tveeprom 16473 1 cx88xx
v4l2_common 13054 3 tuner,cx8800,cx88xx
videodev 61689 4 tuner,cx8800,cx88xx,v4l2_common
snd_seq_midi 12744 0
arc4 12418 4
snd_rawmidi 18695 1 snd_seq_midi
rtl8180 30975 0
media 13692 1 videodev
snd_seq_midi_event 13246 1 snd_seq_midi
videobuf_dma_sg 13047 2 cx8800,cx88xx
snd_seq 39752 2 snd_seq_midi,snd_seq_midi_event
snd_timer 22196 2 snd_pcm,snd_seq
evdev 13043 13
mac80211 162262 2 ath9k_htc,rtl8180
videobuf_core 17638 3 cx8800,cx88xx,videobuf_dma_sg
eeprom_93cx6 12423 1 rtl8180
snd_seq_device 12985 3 snd_seq_midi,snd_rawmidi,snd_seq
processor 23030 0
btcx_risc 12499 2 cx8800,cx88xx
cfg80211 113123 4 ath9k_htc,ath,rtl8180,mac80211
snd 38777 15 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 51130 0
serio_raw 12773 0
pcspkr 12554 0
asus_atk0110 17110 0
parport_pc 22059 1
parport 27363 3 ppdev,lp,parport_pc
button 12810 0
soundcore 12992 1 snd
rng_core 12616 0
i2c_i801 12670 0
rfkill 18770 4 bluetooth,cfg80211
i2c_core 19141 13 tuner_simple,tda9887,tda8290,tea5767,nvidia,tuner,cx8800,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,videodev,i2c_i801
thermal_sys 17677 1 processor
snd_page_alloc 12899 2 snd_hda_intel,snd_pcm
ext4 265786 2
mbcache 12898 1 ext4
jbd2 51805 1 ext4
crc16 12327 2 bluetooth,ext4
btrfs 474196 0
zlib_deflate 21266 1 btrfs
crc32c 12576 1
libcrc32c 12394 1 btrfs
sg 21650 0
sr_mod 17478 0
sd_mod 35493 6
crc_t10dif 12332 1 sd_mod
cdrom 34689 1 sr_mod
usb_storage 35269 1
ata_generic 12439 0
usbhid 31783 0
hid 60152 1 usbhid
uas 13178 0
pata_it821x 13131 0
sata_sil 12825 0
ahci 20897 0
libahci 18355 1 ahci
ata_piix 21232 3
uhci_hcd 22482 0
floppy 48321 0
libata 133692 6 ata_generic,pata_it821x,sata_sil,ahci,libahci,ata_piix
firewire_ohci 26881 0
ehci_hcd 35578 0
firewire_core 43114 1 firewire_ohci
scsi_mod 135686 6 sg,sr_mod,sd_mod,usb_storage,uas,libata
sky2 40477 0
crc_itu_t 12331 1 firewire_core
usbcore 100414 7 ath9k_htc,usb_storage,usbhid,uas,uhci_hcd,ehci_hcd


dmesg

Κώδικας: Επιλογή όλων

[ 0.142456] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.142461] pci 0000:00:1c.2: setting latency timer to 64
[ 0.142468] pci 0000:00:1e.0: setting latency timer to 64
[ 0.142472] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.142475] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.142479] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.142481] pci_bus 0000:05: resource 1 [mem 0xcc000000-0xcdffffff]
[ 0.142484] pci_bus 0000:05: resource 2 [mem 0xce000000-0xdfffffff pref]
[ 0.142487] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.142490] pci_bus 0000:04: resource 1 [mem 0x80400000-0x805fffff]
[ 0.142493] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.142496] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.142498] pci_bus 0000:03: resource 1 [mem 0xcbf00000-0xcbffffff]
[ 0.142501] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.142504] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.142507] pci_bus 0000:02: resource 1 [mem 0xcbe00000-0xcbefffff]
[ 0.142510] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.142513] pci_bus 0000:01: resource 0 [io 0x9000-0xafff]
[ 0.142515] pci_bus 0000:01: resource 1 [mem 0xca000000-0xcbdfffff]
[ 0.142518] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.142521] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.142566] NET: Registered protocol family 2
[ 0.142632] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.142886] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.143346] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.143473] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.143476] TCP reno registered
[ 0.143480] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.143487] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.143615] NET: Registered protocol family 1
[ 0.143752] pci 0000:05:00.0: Boot video device
[ 0.143783] PCI: CLS 16 bytes, default 64
[ 0.143846] Unpacking initramfs...
[ 2.391045] Freeing initrd memory: 7976k freed
[ 2.395698] audit: initializing netlink socket (disabled)
[ 2.395713] type=2000 audit(1317378228.388:1): initialized
[ 2.413773] highmem bounce pool size: 64 pages
[ 2.413781] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.413891] VFS: Disk quotas dquot_6.5.2
[ 2.413912] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.413971] msgmni has been set to 1732
[ 2.414132] alg: No test for stdrng (krng)
[ 2.414161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.414165] io scheduler noop registered
[ 2.414167] io scheduler deadline registered
[ 2.414177] io scheduler cfq registered (default)
[ 2.414280] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.414314] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.414374] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.414411] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 2.414481] pcieport 0000:00:1c.1: setting latency timer to 64
[ 2.414519] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 2.414585] pcieport 0000:00:1c.2: setting latency timer to 64
[ 2.414623] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 2.414853] ERST: Table is not found!
[ 2.414870] isapnp: Scanning for PnP cards...
[ 2.768050] isapnp: No Plug & Play device found
[ 2.768126] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.788487] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.809192] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.809395] Linux agpgart interface v0.103
[ 2.809621] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.812361] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.812369] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.812516] mousedev: PS/2 mouse device common for all mice
[ 2.812583] rtc_cmos 00:03: RTC can wake from S4
[ 2.812690] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.812713] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.812774] EISA: Probing bus 0 at eisa.0
[ 2.812797] Cannot allocate resource for EISA slot 7
[ 2.812799] Cannot allocate resource for EISA slot 8
[ 2.812802] EISA: Detected 0 cards.
[ 2.812805] cpuidle: using governor ladder
[ 2.812807] cpuidle: using governor menu
[ 2.813059] TCP cubic registered
[ 2.813084] NET: Registered protocol family 10
[ 2.813642] Mobile IPv6
[ 2.813646] NET: Registered protocol family 17
[ 2.813652] Registering the dns_resolver key type
[ 2.813671] Using IPI Shortcut mode
[ 2.813781] PM: Hibernation image not present or could not be loaded.
[ 2.813794] registered taskstats version 1
[ 2.814233] rtc_cmos 00:03: setting system clock to 2011-09-30 10:23:49 UTC (1317378229)
[ 2.814262] Initializing network drop monitor service
[ 2.814372] Freeing unused kernel memory: 444k freed
[ 2.814612] Write protecting the kernel text: 2520k
[ 2.814633] Write protecting the kernel read-only data: 1020k
[ 2.872196] udevd[45]: starting version 172
[ 2.974685] usbcore: registered new interface driver usbfs
[ 2.974722] usbcore: registered new interface driver hub
[ 2.982046] sky2: driver version 1.28
[ 2.982085] sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.982100] sky2 0000:03:00.0: setting latency timer to 64
[ 2.982131] sky2 0000:03:00.0: Yukon-2 EC chip revision 1
[ 2.982225] sky2 0000:03:00.0: irq 44 for MSI/MSI-X
[ 2.997812] SCSI subsystem initialized
[ 3.022807] usbcore: registered new device driver usb
[ 3.023127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.023166] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.023187] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.023191] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.023214] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.023251] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.027153] ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
[ 3.027402] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc9fff800
[ 3.039317] firewire_ohci 0000:01:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.039376] sky2 0000:03:00.0: eth0: addr 00:11:d8:55:4d:36
[ 3.039393] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.039405] sky2 0000:02:00.0: setting latency timer to 64
[ 3.039431] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
[ 3.039524] sky2 0000:02:00.0: irq 45 for MSI/MSI-X
[ 3.040174] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.040220] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.040224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.040226] usb usb1: Product: EHCI Host Controller
[ 3.040229] usb usb1: Manufacturer: Linux 3.0.0-1-486 ehci_hcd
[ 3.040231] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.040381] hub 1-0:1.0: USB hub found
[ 3.040388] hub 1-0:1.0: 8 ports detected
[ 3.047562] sky2 0000:02:00.0: eth1: addr 00:11:d8:55:43:fd
[ 3.059625] Floppy drive(s): fd0 is 1.44M
[ 3.075592] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.075642] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.075656] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.075661] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.075674] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.075705] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00007880
[ 3.075750] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.075754] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.075756] usb usb2: Product: UHCI Host Controller
[ 3.075758] usb usb2: Manufacturer: Linux 3.0.0-1-486 uhci_hcd
[ 3.075761] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.075905] hub 2-0:1.0: USB hub found
[ 3.075913] hub 2-0:1.0: 2 ports detected
[ 3.076116] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.076125] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.076128] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.076139] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.076172] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007c00
[ 3.076213] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.076217] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.076220] usb usb3: Product: UHCI Host Controller
[ 3.076222] usb usb3: Manufacturer: Linux 3.0.0-1-486 uhci_hcd
[ 3.076224] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.076353] hub 3-0:1.0: USB hub found
[ 3.076360] hub 3-0:1.0: 2 ports detected
[ 3.076441] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.076450] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.076454] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.076463] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.076493] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008000
[ 3.076530] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.076534] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.076537] usb usb4: Product: UHCI Host Controller
[ 3.076539] usb usb4: Manufacturer: Linux 3.0.0-1-486 uhci_hcd
[ 3.076541] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.076660] hub 4-0:1.0: USB hub found
[ 3.076667] hub 4-0:1.0: 2 ports detected
[ 3.076767] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.076775] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.076778] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.076789] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.076819] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00008080
[ 3.076857] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.076861] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.076864] usb usb5: Product: UHCI Host Controller
[ 3.076866] usb usb5: Manufacturer: Linux 3.0.0-1-486 uhci_hcd
[ 3.076868] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.076991] hub 5-0:1.0: USB hub found
[ 3.076997] hub 5-0:1.0: 2 ports detected
[ 3.077352] libata version 3.00 loaded.
[ 3.077782] ata_piix 0000:00:1f.1: version 2.13
[ 3.077797] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.077838] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.082634] scsi0 : ata_piix
[ 3.085281] scsi1 : ata_piix
[ 3.087304] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.087309] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.091641] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.091665] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.091713] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.092092] firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 3.095395] FDC 0 is a post-1991 82077
[ 3.095791] sata_sil 0000:01:05.0: version 2.4
[ 3.095841] sata_sil 0000:01:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.096503] ata2: port disabled. ignoring.
[ 3.099183] scsi2 : ata_piix
[ 3.102436] scsi3 : sata_sil
[ 3.103102] scsi4 : ata_piix
[ 3.103171] ata3: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8400 irq 19
[ 3.103175] ata4: SATA max UDMA/133 cmd 0x8800 ctl 0x8480 bmdma 0x8408 irq 19
[ 3.105578] scsi5 : sata_sil
[ 3.109771] scsi6 : sata_sil
[ 3.113950] scsi7 : sata_sil
[ 3.114022] ata5: SATA max UDMA/100 mmio m1024@0xcbdff800 tf 0xcbdff880 irq 22
[ 3.114026] ata6: SATA max UDMA/100 mmio m1024@0xcbdff800 tf 0xcbdff8c0 irq 22
[ 3.114030] ata7: SATA max UDMA/100 mmio m1024@0xcbdff800 tf 0xcbdffa80 irq 22
[ 3.114033] ata8: SATA max UDMA/100 mmio m1024@0xcbdff800 tf 0xcbdffac0 irq 22
[ 3.153876] pata_it821x 0000:01:04.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.153883] pata_it821x: controller in pass through mode.
[ 3.153922] pata_it821x 0000:01:04.0: setting latency timer to 64
[ 3.154728] scsi8 : pata_it821x
[ 3.154873] scsi9 : pata_it821x
[ 3.154937] ata9: PATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 23
[ 3.154941] ata10: PATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 23
[ 3.260450] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
[ 3.260458] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A102, max UDMA/33
[ 3.268953] ata3.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B02, max UDMA/133
[ 3.268957] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.272721] ata4.00: ATA-8: WDC WD5000AAKX-003CA0, 15.01H15, max UDMA/133
[ 3.272726] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.276209] ata1.00: configured for UDMA/33
[ 3.284977] ata3.00: configured for UDMA/133
[ 3.288729] ata4.00: configured for UDMA/133
[ 3.292190] ata1.01: configured for UDMA/33
[ 3.300153] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5
[ 3.304209] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5
[ 3.304474] scsi 2:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 3.304679] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[ 3.392017] Refined TSC clocksource calibration: 3211.363 MHz.
[ 3.392024] Switching to clocksource tsc
[ 3.436024] ata5: SATA link down (SStatus 0 SControl 310)
[ 3.520016] usb 1-3: new high speed USB device number 4 using ehci_hcd
[ 3.592104] firewire_core: created device fw0: GUID 0011d800000204e6, S800
[ 3.668848] usb 1-3: New USB device found, idVendor=0bc2, idProduct=3000
[ 3.668852] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.668855] usb 1-3: Product: FreeAgentDesktop
[ 3.668858] usb 1-3: Manufacturer: Seagate
[ 3.668860] usb 1-3: SerialNumber: 9QF7N7R5
[ 3.678011] usbcore: registered new interface driver uas
[ 3.756026] ata6: SATA link down (SStatus 0 SControl 310)
[ 3.912015] usb 2-1: new low speed USB device number 2 using uhci_hcd
[ 4.032013] usb 2-1: device descriptor read/64, error -71
[ 4.076023] ata7: SATA link down (SStatus 0 SControl 310)
[ 4.318754] usb 2-1: New USB device found, idVendor=045e, idProduct=0734
[ 4.318758] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.318762] usb 2-1: Product: Microsoft® Wireless Receiver 700 v2.0
[ 4.318765] usb 2-1: Manufacturer: Liteon
[ 4.396027] ata8: SATA link down (SStatus 0 SControl 310)
[ 4.442093] input: Liteon Microsoft® Wireless Receiver 700 v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input0
[ 4.442211] generic-usb 0003:045E:0734.0001: input,hidraw0: USB HID v1.11 Keyboard [Liteon Microsoft® Wireless Receiver 700 v2.0] on usb-0000:00:1d.0-1/input0
[ 4.470167] input: Liteon Microsoft® Wireless Receiver 700 v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input1
[ 4.470344] generic-usb 0003:045E:0734.0002: input,hidraw1: USB HID v1.11 Mouse [Liteon Microsoft® Wireless Receiver 700 v2.0] on usb-0000:00:1d.0-1/input1
[ 4.470574] usbcore: registered new interface driver usbhid
[ 4.470578] usbhid: USB HID core driver
[ 4.563600] usb 2-2: new full speed USB device number 3 using uhci_hcd
[ 4.573381] Initializing USB Mass Storage driver...
[ 4.596052] scsi10 : usb-storage 1-3:1.0
[ 4.596812] usbcore: registered new interface driver usb-storage
[ 4.596816] USB Mass Storage support registered.
[ 4.607576] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 4.607581] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.607986] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.608233] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.608311] sd 2:0:0:0: [sda] Write Protect is off
[ 4.608316] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.608350] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.609029] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.609106] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.609112] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.609145] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.615748] sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.616173] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 4.624949] sdb: sdb1 sdb2
[ 4.625278] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 4.633155] sda: sda1 sda2 sda3
[ 4.633521] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.638065] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.638150] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 4.638230] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.638316] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 4.749767] usb 2-2: New USB device found, idVendor=046d, idProduct=c52f
[ 4.749773] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.749776] usb 2-2: Product: USB Receiver
[ 4.749778] usb 2-2: Manufacturer: Logitech
[ 4.758068] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
[ 4.758175] generic-usb 0003:046D:C52F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[ 4.762917] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
[ 4.763051] generic-usb 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[ 4.988177] Btrfs loaded
[ 5.420021] end_request: I/O error, dev fd0, sector 0
[ 5.478541] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.599002] scsi 10:0:0:0: Direct-Access Seagate FreeAgentDesktop 100D PQ: 0 ANSI: 4
[ 5.599548] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 5.601365] sd 10:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.602729] sd 10:0:0:0: [sdc] Write Protect is off
[ 5.602735] sd 10:0:0:0: [sdc] Mode Sense: 1c 00 00 00
[ 5.604229] sd 10:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.617671] sdc: sdc1
[ 5.623478] sd 10:0:0:0: [sdc] Attached SCSI disk
[ 6.505841] udevd[319]: starting version 172
[ 7.105422] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.124290] intel_rng: FWH not detected
[ 7.133757] udevd[369]: renamed network interface eth1 to eth2
[ 7.134958] udevd[368]: renamed network interface eth0 to eth1
[ 7.185457] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 7.185466] ACPI: Power Button [PWRB]
[ 7.185540] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.185545] ACPI: Power Button [PWRF]
[ 7.208368] parport_pc 00:07: reported by Plug and Play ACPI
[ 7.208481] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 7.223924] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.289657] cfg80211: Calling CRDA to update world regulatory domain
[ 7.303962] ACPI: acpi_idle registered with cpuidle
[ 7.538151] Linux media interface: v0.10
[ 7.565584] rtl8180 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.730194] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.730826] ieee80211 phy0: hwaddr 00116b63cc2e, RTL8185vD + rtl8225z2
[ 7.796127] Linux video capture interface: v2.00
[ 7.946716] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 7.946756] cx8800 0000:01:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 7.949596] cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected], frontend(s): 0
[ 7.949599] cx88[0]: TV tuner type 44, Radio tuner type -1
[ 8.108097] IR NEC protocol handler initialized
[ 8.109090] i2c-core: driver [tuner] using legacy suspend method
[ 8.109094] i2c-core: driver [tuner] using legacy resume method
[ 8.140999] Disabling lock debugging due to kernel taint
[ 8.141011] nvidia: module license 'NVIDIA' taints kernel.
[ 9.697464] nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.697476] nvidia 0000:05:00.0: setting latency timer to 64
[ 9.697482] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.699219] IR RC5(x) protocol handler initialized
[ 9.700057] NVRM: loading NVIDIA UNIX x86 Kernel Module 280.13 Wed Jul 27 16:55:43 PDT 2011
[ 9.744089] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.744095] hda_intel: position_fix set to 1 for device 1043:813d
[ 9.744147] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 9.744167] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.753934] IR RC6 protocol handler initialized
[ 9.771234] IR JVC protocol handler initialized
[ 9.802975] HDA Intel 0000:05:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.802980] hda_intel: Disabling MSI
[ 9.803009] HDA Intel 0000:05:00.1: setting latency timer to 64
[ 9.834830] IR Sony protocol handler initialized
[ 9.862092] All bytes are equal. It is not a TEA5767
[ 9.862100] tuner 1-0060: Tuner -1 found with type(s) Radio TV.
[ 9.890084] lirc_dev: IR Remote Control driver registered, major 249
[ 9.900054] IR LIRC bridge handler initialized
[ 9.975441] tda9887 1-0043: creating new instance
[ 9.975445] tda9887 1-0043: tda988[5/6/7] found
[ 9.976288] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
[ 10.054390] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
[ 10.180011] tuner-simple 1-0060: creating new instance
[ 10.180041] tuner-simple 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[ 10.220012] Registered IR keymap rc-winfast
[ 10.220159] input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:01:0a.0/rc/rc0/input7
[ 10.220231] rc0: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:01:0a.0/rc/rc0
[ 10.220240] cx88[0]/0: found at 0000:01:0a.0, rev: 5, irq: 21, latency: 64, mmio: 0xca000000
[ 10.223013] cx88[0]/0: registered device video0 [v4l2]
[ 10.223090] cx88[0]/0: registered device vbi0
[ 10.223176] cx88[0]/0: registered device radio0
[ 10.372011] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 10.460011] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 10.548009] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 10.636010] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 10.764330] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input8
[ 10.764434] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input9
[ 10.764531] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input10
[ 10.764630] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input11
[ 11.277406] Adding 5057532k swap on /dev/sda3. Priority:-1 extents:1 across:5057532k
[ 11.281933] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.499802] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.565999] device-mapper: uevent: version 1.0.3
[ 11.566559] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 11.691114] loop: module loaded
[ 12.173264] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[ 12.247491] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 12.719512] fuse init (API version 7.16)
[ 15.187762] sky2 0000:03:00.0: eth1: enabling interface
[ 15.187948] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 15.194967] sky2 0000:02:00.0: eth2: enabling interface
[ 15.198353] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 17.209497] Bluetooth: Core ver 2.16
[ 17.209536] NET: Registered protocol family 31
[ 17.209539] Bluetooth: HCI device and connection manager initialized
[ 17.209542] Bluetooth: HCI socket layer initialized
[ 17.209544] Bluetooth: L2CAP socket layer initialized
[ 17.212900] Bluetooth: SCO socket layer initialized
[ 17.473609] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.473614] Bluetooth: BNEP filters: protocol multicast
[ 17.478821] Bluetooth: RFCOMM TTY layer initialized
[ 17.478827] Bluetooth: RFCOMM socket layer initialized
[ 17.478830] Bluetooth: RFCOMM ver 1.11
[ 17.980097] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
[ 17.990476] HDMI status: Pin=5 Presence_Detect=1 ELD_Valid=0
[ 18.007584] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1
[ 18.012029] HDMI status: Pin=5 Presence_Detect=1 ELD_Valid=1
[ 18.780015] HDMI: detected monitor 32LC3R-ZJ
[ 18.780018] at connection type HDMI
[ 18.780022] HDMI: available speakers: FL/FR
[ 18.780029] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 20
[ 19.956168] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.149866] lp0: using parport0 (interrupt-driven).
[ 20.245392] ppdev: user-space parallel port driver
[ 23.952862] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 24.062646] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 104.224783] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 104.410378] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 105.009485] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 105.236034] wlan0: authenticate with 08:76:ff:5c:da:cc (try 1)
[ 105.238300] wlan0: authenticated
[ 105.300035] wlan0: associate with 08:76:ff:5c:da:cc (try 1)
[ 105.309458] wlan0: RX AssocResp from 08:76:ff:5c:da:cc (capab=0x411 status=0 aid=1)
[ 105.309463] wlan0: associated
[ 105.309976] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 115.408018] wlan0: no IPv6 routers present
[ 124.507531] exe (2213): /proc/2213/oom_adj is deprecated, please use /proc/2213/oom_score_adj instead.
[ 1135.048028] usb 1-4: new high speed USB device number 5 using ehci_hcd
[ 1135.180940] usb 1-4: New USB device found, idVendor=0cf3, idProduct=7015
[ 1135.180946] usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1135.180949] usb 1-4: Product: UB95
[ 1135.180952] usb 1-4: Manufacturer: ATHEROS
[ 1135.180955] usb 1-4: SerialNumber: 12345
[ 1135.523543] usb 1-4: ath9k_htc: Transferred FW: htc_7010.fw, size: 72992
[ 1135.584787] ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 45 credits
[ 1135.711533] ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
[ 1135.711538] ath: EEPROM regdomain: 0x809c
[ 1135.711540] ath: EEPROM indicates we should expect a country code
[ 1135.711543] ath: doing EEPROM country->regdmn map search
[ 1135.711546] ath: country maps to regdmn code: 0x52
[ 1135.711549] ath: Country alpha2 being used: CN
[ 1135.711551] ath: Regpair used: 0x52
[ 1135.713753] ieee80211 phy1: Atheros AR9287 Rev:2
[ 1135.714376] Registered led device: ath9k_htc-phy1
[ 1135.714381] usb 1-4: ath9k_htc: USB layer initialized
[ 1135.714857] usbcore: registered new interface driver ath9k_htc
[ 1135.741234] udevd[422]: renamed network interface wlan1 to wlan2
[ 1135.933088] ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 1138.120367] wlan2: authenticate with 08:76:ff:5c:da:cc (try 1)
[ 1138.122384] wlan2: authenticated
[ 1138.122414] wlan2: associate with 08:76:ff:5c:da:cc (try 1)
[ 1138.131637] wlan2: RX AssocResp from 08:76:ff:5c:da:cc (capab=0x411 status=0 aid=2)
[ 1138.131642] wlan2: associated
[ 1138.140893] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[ 1146.800445] wlan0: deauthenticating from 08:76:ff:5c:da:cc by local choice (reason=3)
[ 1149.008009] wlan2: no IPv6 routers present


[billver]

απλά να αναφέρω δουλεύει μια κάρτα δικτύου εσωτερική που έχω αλλά δεν μου αποδίδει καλό σήμα για αυτό έβαλα εξωτερικό usb