HP nx7400 αργό wifi

[adem1]

Γειά σας.
Έχω πολύ χαμηλή ταχύτητα στο wifi, προσπάθησα να το επιλύσω με διάφορους τρόπους που βρήκα στο web από άλλους χρήστες του 11.10 καθώς, μάλλον αντιμετώπιζαν το ίδιο πρόβλημα (γίνεται λόγος κυρίως για IPv6). Έκανα αυτό που μου πρότεινε ο vagrale13 σε ένα προηγούμενο θέμα http://forum.ubuntu-gr.org/viewtopic.php?f=39&t=20781. Ελπίζω να βοηθήσει.
Αυτή είναι η έξοδος των εντολών

Κώδικας: Επιλογή όλων

lspci -nn
dmesg
iwconfig
uname -a

Κώδικας: Επιλογή όλων

[ 0.374313] pci 0000:02:06.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[ 0.374320] pci 0000:02:06.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[ 0.374324] pci 0000:02:06.0: BAR 13: assigned [io 0x5000-0x50ff]
[ 0.374327] pci 0000:02:06.0: BAR 14: assigned [io 0x5400-0x54ff]
[ 0.374331] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[ 0.374334] pci 0000:02:06.0: bridge window [io 0x5000-0x50ff]
[ 0.374341] pci 0000:02:06.0: bridge window [io 0x5400-0x54ff]
[ 0.374349] pci 0000:02:06.0: bridge window [mem 0x40000000-0x43ffffff pref]
[ 0.374356] pci 0000:02:06.0: bridge window [mem 0x48000000-0x4bffffff]
[ 0.374363] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.374367] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 0.374375] pci 0000:00:1e.0: bridge window [mem 0xf4100000-0xf43fffff]
[ 0.374382] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x43ffffff pref]
[ 0.374419] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.374427] pci 0000:00:1c.0: setting latency timer to 64
[ 0.374441] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.374447] pci 0000:00:1c.1: setting latency timer to 64
[ 0.374461] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.374468] pci 0000:00:1c.3: setting latency timer to 64
[ 0.374478] pci 0000:00:1e.0: setting latency timer to 64
[ 0.374493] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.374501] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.374505] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.374509] pci_bus 0000:08: resource 0 [io 0x7000-0x7fff]
[ 0.374512] pci_bus 0000:08: resource 1 [mem 0x44400000-0x445fffff]
[ 0.374516] pci_bus 0000:08: resource 2 [mem 0x44600000-0x447fffff 64bit pref]
[ 0.374520] pci_bus 0000:10: resource 0 [io 0x6000-0x6fff]
[ 0.374523] pci_bus 0000:10: resource 1 [mem 0xf4000000-0xf40fffff]
[ 0.374527] pci_bus 0000:10: resource 2 [mem 0x44200000-0x443fffff 64bit pref]
[ 0.374531] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff]
[ 0.374534] pci_bus 0000:20: resource 1 [mem 0xf0000000-0xf3ffffff]
[ 0.374538] pci_bus 0000:20: resource 2 [mem 0x44000000-0x441fffff 64bit pref]
[ 0.374542] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.374546] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf43fffff]
[ 0.374549] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref]
[ 0.374553] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.374557] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.374560] pci_bus 0000:03: resource 0 [io 0x5000-0x50ff]
[ 0.374564] pci_bus 0000:03: resource 1 [io 0x5400-0x54ff]
[ 0.374567] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref]
[ 0.374571] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff]
[ 0.374637] NET: Registered protocol family 2
[ 0.374736] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.375076] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.375826] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.376255] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.376260] TCP reno registered
[ 0.376265] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.376280] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.376431] NET: Registered protocol family 1
[ 0.376465] pci 0000:00:02.0: Boot video device
[ 0.376628] PCI: CLS 64 bytes, default 64
[ 0.377078] audit: initializing netlink socket (disabled)
[ 0.377092] type=2000 audit(1319734805.372:1): initialized
[ 0.407214] highmem bounce pool size: 64 pages
[ 0.407222] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.415251] VFS: Disk quotas dquot_6.5.2
[ 0.415353] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.416328] fuse init (API version 7.16)
[ 0.416455] msgmni has been set to 1704
[ 0.416910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.416947] io scheduler noop registered
[ 0.416950] io scheduler deadline registered
[ 0.416969] io scheduler cfq registered (default)
[ 0.417123] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.417194] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.417288] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.417350] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.417440] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.417502] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.417622] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.417656] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.417734] intel_idle: MWAIT substates: 0x22220
[ 0.417737] intel_idle: does not run on family 6 model 14
[ 0.421697] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.421845] ACPI: AC Adapter [C1B7] (on-line)
[ 0.421948] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.421956] ACPI: Sleep Button [C23E]
[ 0.422017] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.422058] ACPI: Lid Switch [C237]
[ 0.422119] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.422124] ACPI: Power Button [PWRF]
[ 0.422241] ACPI: Fan [C318] (off)
[ 0.422315] ACPI: Fan [C319] (off)
[ 0.422383] ACPI: Fan [C31A] (off)
[ 0.422451] ACPI: Fan [C31B] (off)
[ 0.422462] ACPI: acpi_idle registered with cpuidle
[ 0.422639] Marking TSC unstable due to TSC halts in idle
[ 0.447071] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.447076] ACPI: Thermal Zone [TZ0] (27 C)
[ 0.461533] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.461538] ACPI: Thermal Zone [TZ1] (33 C)
[ 0.475639] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.475644] ACPI: Thermal Zone [TZ2] (21 C)
[ 0.486050] thermal LNXTHERM:03: registered as thermal_zone3
[ 0.486055] ACPI: Thermal Zone [TZ3] (21 C)
[ 0.489775] thermal LNXTHERM:04: registered as thermal_zone4
[ 0.489778] ACPI: Thermal Zone [TZ4] (75 C)
[ 0.489842] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.489863] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.489886] ERST: Table is not found!
[ 0.490019] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.490485] isapnp: Scanning for PnP cards...
[ 0.539719] ACPI: Battery Slot [C1B8] (battery absent)
[ 0.560424] Freeing initrd memory: 13304k freed
[ 0.594380] ACPI: Battery Slot [C1B9] (battery present)
[ 0.844723] isapnp: No Plug & Play device found
[ 0.850273] Linux agpgart interface v0.103
[ 0.850382] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.850436] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.851261] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.851420] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.853171] brd: module loaded
[ 0.853969] loop: module loaded
[ 0.854161] ata_piix 0000:00:1f.1: version 2.13
[ 0.854180] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.854227] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.854656] scsi0 : ata_piix
[ 0.854789] scsi1 : ata_piix
[ 0.855199] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14
[ 0.855203] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15
[ 0.855387] ata2: port disabled. ignoring.
[ 0.855699] Fixed MDIO Bus: probed
[ 0.855732] PPP generic driver version 2.4.2
[ 0.855786] tun: Universal TUN/TAP device driver, 1.6
[ 0.855789] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.855893] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.855924] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.855941] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.855946] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.855994] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.856039] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.856054] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.859932] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.859955] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
[ 0.872020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.872211] hub 1-0:1.0: USB hub found
[ 0.872217] hub 1-0:1.0: 8 ports detected
[ 0.872322] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.872339] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.872368] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.872378] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.872383] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.872430] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.872462] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
[ 0.872622] hub 2-0:1.0: USB hub found
[ 0.872628] hub 2-0:1.0: 2 ports detected
[ 0.872710] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.872718] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.872723] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.872774] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.872817] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
[ 0.872978] hub 3-0:1.0: USB hub found
[ 0.872983] hub 3-0:1.0: 2 ports detected
[ 0.873066] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.873074] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.873079] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.873122] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.873167] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[ 0.873330] hub 4-0:1.0: USB hub found
[ 0.873336] hub 4-0:1.0: 2 ports detected
[ 0.873416] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.873424] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.873429] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.873472] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.873516] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080
[ 0.873682] hub 5-0:1.0: USB hub found
[ 0.873687] hub 5-0:1.0: 2 ports detected
[ 0.873846] i8042: PNP: PS/2 Controller [PNP0303:C215,PNP0f13:C216] at 0x60,0x64 irq 1,12
[ 0.875503] i8042: Detected active multiplexing controller, rev 1.1
[ 0.876178] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.876187] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.876228] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.876261] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.876294] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.876441] mousedev: PS/2 mouse device common for all mice
[ 0.876640] rtc_cmos 00:06: RTC can wake from S4
[ 0.876782] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.876818] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.876938] device-mapper: uevent: version 1.0.3
[ 0.877035] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.877078] EISA: Probing bus 0 at eisa.0
[ 0.877086] Cannot allocate resource for EISA slot 1
[ 0.877089] Cannot allocate resource for EISA slot 2
[ 0.877091] Cannot allocate resource for EISA slot 3
[ 0.877094] Cannot allocate resource for EISA slot 4
[ 0.877097] Cannot allocate resource for EISA slot 5
[ 0.877100] Cannot allocate resource for EISA slot 6
[ 0.877103] Cannot allocate resource for EISA slot 7
[ 0.877109] EISA: Detected 0 cards.
[ 0.877122] cpufreq-nforce2: No nForce2 chipset.
[ 0.877185] cpuidle: using governor ladder
[ 0.877285] cpuidle: using governor menu
[ 0.877288] EFI Variables Facility v0.08 2004-May-17
[ 0.877679] TCP cubic registered
[ 0.877871] NET: Registered protocol family 10
[ 0.878675] NET: Registered protocol family 17
[ 0.878694] Registering the dns_resolver key type
[ 0.878715] Using IPI No-Shortcut mode
[ 0.878811] PM: Hibernation image not present or could not be loaded.
[ 0.878826] registered taskstats version 1
[ 0.890401] Magic number: 15:817:37
[ 0.890425] bdi 7:2: hash matches
[ 0.890555] rtc_cmos 00:06: setting system clock to 2011-10-27 17:00:06 UTC (1319734806)
[ 0.896686] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.896690] EDD information not available.
[ 0.899028] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.032473] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH15, max MWDMA2
[ 1.064350] ata1.00: configured for MWDMA2
[ 1.080468] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH15 PQ: 0 ANSI: 5
[ 1.112299] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.112307] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.112560] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.112649] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.112838] Freeing unused kernel memory: 696k freed
[ 1.113202] Write protecting the kernel text: 5332k
[ 1.113296] Write protecting the kernel read-only data: 2188k
[ 1.138987] udevd[85]: starting version 173
[ 1.294173] ahci 0000:00:1f.2: version 3.0
[ 1.294199] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.294274] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.294345] ahci: SSS flag set, parallel bus scan disabled
[ 1.294381] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.294388] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 1.294397] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.294776] b44 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.306698] scsi2 : ahci
[ 1.307471] scsi3 : ahci
[ 1.308414] scsi4 : ahci
[ 1.308558] scsi5 : ahci
[ 1.308729] ata3: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585100 irq 43
[ 1.308734] ata4: DUMMY
[ 1.308736] ata5: DUMMY
[ 1.308739] ata6: DUMMY
[ 1.316079] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.316091] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.316101] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.356240] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[ 1.356288] b44: b44.c:v2.0
[ 1.356299] firewire_ohci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.377304] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:08:44:f5:4d
[ 1.412144] firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.424082] usb 2-1: new full speed USB device number 2 using uhci_hcd
[ 1.912256] firewire_core: created device fw0: GUID 00023f992915490c, S400
[ 2.032070] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.033291] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.033306] ata3.00: ATA-7: HTS541080G9SA00, MB4OC60P, max UDMA/100
[ 2.033314] ata3.00: 156301488 sectors, multi 16: LBA48
[ 2.034769] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.034783] ata3.00: configured for UDMA/100
[ 2.035024] scsi 2:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4O PQ: 0 ANSI: 5
[ 2.035223] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.035331] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.035438] sd 2:0:0:0: [sda] Write Protect is off
[ 2.035442] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.035518] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.429030] sda: sda1 sda2 < sda5 >
[ 2.429699] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.716089] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.542471] udevd[311]: starting version 173
[ 16.596919] Adding 1038332k swap on /dev/sda5. Priority:-1 extents:1 across:1038332k
[ 16.602446] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 16.602583] [Firmware Bug]: _BCQ is used instead of _BQC
[ 16.605785] lp: driver loaded but no devices found
[ 16.629050] acpi device:02: registered as cooling_device6
[ 16.629243] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 16.629332] ACPI: Video Device [C080] (multi-head: yes rom: no post: no)
[ 16.652159] intel_rng: FWH not detected
[ 16.659314] [drm] Initialized drm 1.1.0 20060810
[ 16.666922] wmi: Mapper loaded
[ 16.673035] leds_ss4200: no LED devices found
[ 16.715096] cfg80211: Calling CRDA to update world regulatory domain
[ 16.719325] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30a2]
[ 16.719350] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[ 16.719358] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[ 16.719361] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[ 16.719369] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01011b22, devctl 0x64
[ 16.769434] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 16.769439] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 16.769533] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.769550] iwl3945 0000:10:00.0: setting latency timer to 64
[ 16.827292] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.827301] i915 0000:00:02.0: setting latency timer to 64
[ 16.847259] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 16.847265] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 16.847422] iwl3945 0000:10:00.0: irq 44 for MSI/MSI-X
[ 16.903062] parport_pc 00:02: reported by Plug and Play ACPI
[ 16.903152] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 16.906390] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 16.906394] [drm] Driver supports precise vblank timestamp query.
[ 16.906543] Registered led device: phy0-led
[ 16.906618] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.907860] Bluetooth: Core ver 2.16
[ 16.907922] NET: Registered protocol family 31
[ 16.907925] Bluetooth: HCI device and connection manager initialized
[ 16.907928] Bluetooth: HCI socket layer initialized
[ 16.907931] Bluetooth: L2CAP socket layer initialized
[ 16.913482] Bluetooth: SCO socket layer initialized
[ 16.913961] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 16.914158] usbcore: registered new interface driver btusb
[ 16.932084] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 16.941949] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.952774] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
[ 16.952780] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 16.952786] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 16.952797] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
[ 16.952802] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
[ 16.994068] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 17.005842]
[ 17.005852] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xf4100000-0xf43fffff]
[ 17.005858] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4100000-0xf43fffff: excluding 0xf4100000-0xf412ffff
[ 17.005875] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref]
[ 17.005880] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff: excluding 0x40000000-0x43ffffff
[ 17.008918] lp0: using parport0 (interrupt-driven).
[ 17.182635] type=1400 audit(1319734822.786:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=618 comm="apparmor_parser"
[ 17.183207] type=1400 audit(1319734822.786:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=618 comm="apparmor_parser"
[ 17.183572] type=1400 audit(1319734822.786:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
[ 17.185437] type=1400 audit(1319734822.790:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=666 comm="apparmor_parser"
[ 17.186010] type=1400 audit(1319734822.790:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=666 comm="apparmor_parser"
[ 17.186378] type=1400 audit(1319734822.790:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=666 comm="apparmor_parser"
[ 17.256875] [drm] initialized overlay support
[ 17.313300] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
[ 17.313310] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 17.333050] ppdev: user-space parallel port driver
[ 17.354348] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[ 17.358919] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.358925] cfg80211: World regulatory domain updated:
[ 17.358928] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.358932] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.358936] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.358940] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.358944] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.358948] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.388287] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 17.388715] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 17.392342] type=1400 audit(1319734822.998:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=811 comm="apparmor_parser"
[ 17.392661] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 17.393655] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 17.395612] type=1400 audit(1319734822.998:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=810 comm="apparmor_parser"
[ 17.396199]
[ 17.396294] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 17.397049] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 17.397883] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[ 17.397955] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 17.398027] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 17.398102] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 17.399721] type=1400 audit(1319734823.002:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=811 comm="apparmor_parser"
[ 17.400199] type=1400 audit(1319734823.006:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=811 comm="apparmor_parser"
[ 17.414124] fbcon: inteldrmfb (fb0) is primary device
[ 17.414614] Console: switching to colour frame buffer device 160x50
[ 17.414661] fb0: inteldrmfb frame buffer device
[ 17.414664] drm: registered panic notifier
[ 17.414726] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.520353] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.520367] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.520381] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.520465] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 17.520509] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.677802] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[ 17.759533] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.788501] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.228245] init: failsafe main process (745) killed by TERM signal
[ 18.229646] init: apport pre-start process (925) terminated with status 1
[ 18.261172] init: apport post-stop process (977) terminated with status 1
[ 18.278372] init: gdm main process (972) killed by TERM signal
[ 18.654674] Bluetooth: RFCOMM TTY layer initialized
[ 18.654682] Bluetooth: RFCOMM socket layer initialized
[ 18.654685] Bluetooth: RFCOMM ver 1.11
[ 18.661235] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.661240] Bluetooth: BNEP filters: protocol multicast
[ 19.504828] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.792533] init: plymouth-stop pre-start process (1215) terminated with status 1
[ 21.788286] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 26.056218] wlan0: authenticate with 00:1b:2f:f0:30:52 (try 1)
[ 26.058837] wlan0: authenticated
[ 26.062339] wlan0: associate with 00:1b:2f:f0:30:52 (try 1)
[ 26.065173] wlan0: RX AssocResp from 00:1b:2f:f0:30:52 (capab=0x401 status=0 aid=3)
[ 26.065178] wlan0: associated
[ 26.067131] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.912031] wlan0: no IPv6 routers present
[ 444.988117] b44 ssb0:0: eth0: Remote fault detected in PHY
[ 446.988201] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[ 446.988206] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[ 446.988593] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 460.032792] wlan0: deauthenticating from 00:1b:2f:f0:30:52 by local choice (reason=3)
[ 460.036783] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 460.036795] cfg80211: Restoring regulatory settings
[ 460.036805] cfg80211: Calling CRDA to update world regulatory domain
[ 460.037613] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 460.045750] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 460.045757] cfg80211: World regulatory domain updated:
[ 460.045760] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 460.045764] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 460.045768] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 460.045772] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 460.045776] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 460.045779] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
adem@adem-HP-Compaq-nx7400-EY508ES-B1A:~$ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11abg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off

adem@adem-HP-Compaq-nx7400-EY508ES-B1A:~$ uname -a
Linux adem-HP-Compaq-nx7400-EY508ES-B1A 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux
adem@adem-HP-Compaq-nx7400-EY508ES-B1A:~$ iwconfig


[vagrale13]

Πες μας πως εχεις κανει την εγκατασταση, κανονικα ή μεσα απο τα παραθυρα (με το wubi)?
Επισης, ποσταρε το αποτελεσμα της πρωτης εντολης που μαλλον σου διεφυγε, οπως και το αποτελεσμα της εντολης

Κώδικας: Επιλογή όλων

lsmod

[adem1]

Να με συγχωρέσετε που δεν ανέφερα για την εγκατάσταση. Το λάπτοπ το πήρα πριν λίγες μέρες, είχε μέσα παράθυρα, αλλά έκανα εγκατάσταση κανονικά μέσω usb, χρησιμοποιώντας το UnetBootin, Και δεν τρέχει κανένα άλλο λειτουργικό τώρα, έχει μόνο oneiric.
H lspci -nn βγάζει

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 01)
02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
02:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
02:0e.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
adem@adem-HP-Compaq-nx7400-EY508ES-B1A:~$


και η lsmod βγάζει

Κώδικας: Επιλογή όλων

adem@adem-HP-Compaq-nx7400-EY508ES-B1A:~$ lsmod
Module Size Used by
bnep 17923 2
rfcomm 38408 8
snd_hda_codec_si3054 12864 1
snd_hda_codec_analog 75090 1
joydev 17393 0
hp_wmi 13652 0
sparse_keymap 13658 1 hp_wmi
binfmt_misc 17292 1
ppdev 12849 0
pcmcia 39822 0
snd_hda_intel 24262 5
snd_hda_codec 91754 3 snd_hda_codec_si3054,snd_hda_codec_analog,snd_hda_intel
snd_hwdep 13276 1 snd_hda_codec
btusb 18160 2
snd_pcm 80468 5 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
yenta_socket 27428 0
pcmcia_rsrc 18367 1 yenta_socket
psmouse 73673 0
bluetooth 148839 23 bnep,rfcomm,btusb
pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc
serio_raw 12990 0
snd_seq_midi 13132 0
snd_rawmidi 25241 1 snd_seq_midi
i915 505108 3
arc4 12473 2
parport_pc 32114 1
iwl3945 73329 0
snd_seq_midi_event 14475 1 snd_seq_midi
drm_kms_helper 32889 1 i915
iwl_legacy 71499 1 iwl3945
drm 192226 4 i915,drm_kms_helper
snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event
wmi 18744 1 hp_wmi
mac80211 272785 2 iwl3945,iwl_legacy
i2c_algo_bit 13199 1 i915
snd_timer 28932 2 snd_pcm,snd_seq
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 55902 18 snd_hda_codec_si3054,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
cfg80211 172392 3 iwl3945,iwl_legacy,mac80211
video 18908 1 i915
soundcore 12600 1 snd
snd_page_alloc 14115 2 snd_hda_intel,snd_pcm
lp 17455 0
parport 40930 3 ppdev,parport_pc,lp
usbhid 41905 0
firewire_ohci 35854 0
hid 77367 1 usbhid
firewire_core 56937 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
b44 31443 0
ssb 50682 1 b44
ahci 21634 2
libahci 25727 1 ahci


[vagrale13]

Με μια αναζητηση που εκανα, ειδα οτι και αλλοι χρηστες εχουν παρομοια προβληματα με την συγκεκριμενη καρτα.
Πρωτα απ' ολα δες τις εικονες εδω viewtopic.php?f=9&t=8535#parC
και κανε τις ρυθμισεις στις Πηγες λογισμικου οπως λεει εκει, κανε ενα update,
μετα λογικα θα σου ζητησει να κανεις επανεκκινηση, και μετα που θα μπεις, δες αν εχει βελτιωθει το προβλημα που εχεις.

Αν οχι, δοκιμασε απο τις ρυθμισεις του ρουτερ σου, να ελευθερωσεις το ασυρματο σου, και να συνδεθεις χωρις κωδικο, και δες αν εχεις το ιδιο προβλημα.

Αν και παλι εχεις το ιδιο προβλημα, μπορεις να δοκιμασεις μια νεοτερη εκδοση πυρηνα,
και να δεις αν εχει διορθωθει το προβλημα
http://kernel.ubuntu.com/~kernel-ppa/ma ... 0-oneiric/
κατεβασε και κανε εγκατασταση τα 3 πακετα
linux-headers-3.1.0-030100rc10-generic_3.1.0-030100rc10.201110200610_i386.deb
linux-headers-3.1.0-030100rc10_3.1.0-030100rc10.201110200610_all.deb
linux-image-3.1.0-030100rc10-generic_3.1.0-030100rc10.201110200610_i386.deb

αν για καποιο λογο υπαρξει καποιο προβλημα μετα απο αυτο, και δεν μπορεις να μπεις στο συστημα σου, μπες με το live usb να το φτιαξουμε.

[adem1]

Ευχαριστώ πολύ vargale13! Τα updates δεν έκανα τίποτα, αλλά, τελικά ήθελε νεότερη έκδοση πυρήνα! Και πάλι ευχαριστώ!