Πρόβλημα ασύρματης σύνδεσης Toshiba NB200

[Epirotes]

Πρόκειται για το γνωστό προβληματικό νέτμπουκ της Toshiba (δείτε εδώ: viewtopic.php?f=4&t=14060&hilit=Toshiba+NB200) Τώρα έχει easypeasy (βασισμένο σε ubuntu 10.04.02) το οποίο δουλεύει μια χαρά και το ενσύρματο δίκτυο δουλεύει, αλλά ο φίλος μου το θέλει κυρίως με ασύρματη σύνδεση κι έως τώρα δεν καταφέραμε να το κάνει να συνδέεται ασύρματα :
http://pastebin.ubuntu-gr.org/m6ccdb590

[vagrale13]

Η καρτα που εχεις ειναι αυτη

Κώδικας: Επιλογή όλων

03:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)

και υποστηριζεται απο τον οδηγο ath9k http://linuxwireless.org/en/users/Drivers/ath9k/devices
Δωσε μας και τα αποτελεσματα απο

Κώδικας: Επιλογή όλων

dmesg
lsmod

[Epirotes]

Έρχεται, στον δρόμο είναι: όπως είπα είναι μηχάνημα του κολλητού μου (ναι, γνωστός που με "βυσμάτωσε" κι έγινα Ουμπουντέρο), του έστειλα ηλ. ταχυδρομείο και περιμένω το απάντηση. Θα τον ειδοποιήσω και τηλ. να το κοιτάξει. Σόρρυ μάγκες ο φίλος είναι ολίγον τι αργός. Υπομονή στο δρόμο είναι έρχονται και τα αποτελέσματα των αλλων δύο εντολών.

[Epirotes]

1. dmesg (λείπει η αρχή):

Κώδικας: Επιλογή όλων

[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.180104] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.180121] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.184040] Brought up 2 CPUs
[ 0.184047] Total of 2 processors activated (6383.96 BogoMIPS).
[ 0.184326] CPU0 attaching sched-domain:
[ 0.184334] domain 0: span 0-1 level SIBLING
[ 0.184340] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.184353] domain 1: span 0-1 level MC
[ 0.184358] groups: 0-1 (cpu_power = 1178)
[ 0.184371] CPU1 attaching sched-domain:
[ 0.184376] domain 0: span 0-1 level SIBLING
[ 0.184381] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.184393] domain 1: span 0-1 level MC
[ 0.184398] groups: 0-1 (cpu_power = 1178)
[ 0.184576] devtmpfs: initialized
[ 0.184576] regulator: core version 0.5
[ 0.184576] Time: 23:30:40 Date: 06/01/11
[ 0.184576] NET: Registered protocol family 16
[ 0.184576] Trying to unpack rootfs image as initramfs...
[ 0.184578] EISA bus registered
[ 0.184603] ACPI: bus type pci registered
[ 0.184785] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.184795] PCI: MCFG area at e0000000 reserved in E820
[ 0.184801] PCI: Using MMCONFIG for extended config space
[ 0.184807] PCI: Using configuration type 1 for base access
[ 0.190223] bio: create slab <bio-0> at 0
[ 0.192808] ACPI: EC: Look up EC in DSDT
[ 0.201147] ACPI: BIOS _OSI(Linux) query ignored
[ 0.204701] ACPI: Interpreter enabled
[ 0.204714] ACPI: (supports S0 S3 S4 S5)
[ 0.204782] ACPI: Using IOAPIC for interrupt routing
[ 0.258552] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.259351] ACPI: No dock devices found.
[ 0.260832] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.261033] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf007ffff]
[ 0.261046] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.261059] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.261071] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0200000-0xf023ffff]
[ 0.261139] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0080000-0xf00fffff]
[ 0.261317] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0440000-0xf0443fff]
[ 0.261406] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.261417] pci 0000:00:1b.0: PME# disabled
[ 0.261551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.261562] pci 0000:00:1c.0: PME# disabled
[ 0.261698] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.261709] pci 0000:00:1c.1: PME# disabled
[ 0.261844] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.261855] pci 0000:00:1c.2: PME# disabled
[ 0.261999] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.262011] pci 0000:00:1c.3: PME# disabled
[ 0.262109] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.262206] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.262302] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.262398] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.262500] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0444000-0xf04443ff]
[ 0.262589] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.262599] pci 0000:00:1d.7: PME# disabled
[ 0.262839] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.262851] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.262862] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.262873] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 007f)
[ 0.262886] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.262960] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.262976] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.262991] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.263006] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.263022] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.263117] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.263133] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.263148] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.263163] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.263179] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.263194] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0444400-0xf04447ff]
[ 0.263248] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.263259] pci 0000:00:1f.2: PME# disabled
[ 0.263343] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.263610] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0100000-0xf010ffff]
[ 0.263763] pci 0000:03:00.0: supports D1
[ 0.263770] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.263784] pci 0000:03:00.0: PME# disabled
[ 0.263916] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[ 0.264143] pci 0000:04:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.264245] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xf0510000-0xf0510fff]
[ 0.264319] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xf0500000-0xf050ffff]
[ 0.264368] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.264550] pci 0000:04:00.0: supports D1 D2
[ 0.264558] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.264590] pci 0000:04:00.0: PME# disabled
[ 0.264776] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.264796] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0500000-0xf05fffff]
[ 0.264975] pci 0000:00:1e.0: transparent bridge
[ 0.265038] pci_bus 0000:00: on NUMA node 0
[ 0.265059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.265644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.265884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.266133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.266362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.266679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.290551] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.290853] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.291142] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.291426] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.291727] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.292055] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.292345] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.292642] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.293004] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.293039] vgaarb: loaded
[ 0.293392] SCSI subsystem initialized
[ 0.293638] libata version 3.00 loaded.
[ 0.293885] usbcore: registered new interface driver usbfs
[ 0.293927] usbcore: registered new interface driver hub
[ 0.294016] usbcore: registered new device driver usb
[ 0.294522] ACPI: WMI: Mapper loaded
[ 0.294530] PCI: Using ACPI for IRQ routing
[ 0.294958] NetLabel: Initializing
[ 0.294966] NetLabel: domain hash size = 128
[ 0.294971] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.295007] NetLabel: unlabeled traffic allowed by default
[ 0.295123] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.295139] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.300333] Switching to clocksource tsc
[ 0.304986] AppArmor: AppArmor Filesystem Enabled
[ 0.305026] pnp: PnP ACPI init
[ 0.305073] ACPI: bus type pnp registered
[ 0.327409] pnp: PnP ACPI: found 9 devices
[ 0.327420] ACPI: ACPI bus type pnp unregistered
[ 0.327430] PnPBIOS: Disabled by ACPI PNP
[ 0.327467] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.327478] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.327489] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.327500] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.327510] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.327520] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.327531] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.327543] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.327571] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.327608] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.327620] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.327631] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.327643] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.327654] system 00:05: ioport range 0xff2c-0xff7f has been reserved
[ 0.362901] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.362918] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.362932] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.362944] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.362961] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.362970] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.362983] pci 0000:00:1c.1: MEM window: 0xf0100000-0xf01fffff
[ 0.362995] pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.363013] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.363022] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.363035] pci 0000:00:1c.2: MEM window: 0x40600000-0x409fffff
[ 0.363046] pci 0000:00:1c.2: PREFETCH window: 0x000000f0500000-0x000000f05fffff
[ 0.363062] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.363071] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.363084] pci 0000:00:1c.3: MEM window: 0x40a00000-0x40bfffff
[ 0.363095] pci 0000:00:1c.3: PREFETCH window: 0x00000040c00000-0x00000040dfffff
[ 0.363111] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.363117] pci 0000:00:1e.0: IO window: disabled
[ 0.363129] pci 0000:00:1e.0: MEM window: disabled
[ 0.363138] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.363178] alloc irq_desc for 17 on node -1
[ 0.363185] alloc kstat_irqs on node -1
[ 0.363202] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.363215] pci 0000:00:1c.0: setting latency timer to 64
[ 0.363237] alloc irq_desc for 16 on node -1
[ 0.363243] alloc kstat_irqs on node -1
[ 0.363255] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.363266] pci 0000:00:1c.1: setting latency timer to 64
[ 0.363287] alloc irq_desc for 18 on node -1
[ 0.363293] alloc kstat_irqs on node -1
[ 0.363304] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.363315] pci 0000:00:1c.2: setting latency timer to 64
[ 0.363337] alloc irq_desc for 19 on node -1
[ 0.363343] alloc kstat_irqs on node -1
[ 0.363354] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.363366] pci 0000:00:1c.3: setting latency timer to 64
[ 0.363383] pci 0000:00:1e.0: setting latency timer to 64
[ 0.363395] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.363404] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.363413] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.363422] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.363430] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.363439] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.363447] pci_bus 0000:03: resource 1 mem: [0xf0100000-0xf01fffff]
[ 0.363456] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.363465] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 0.363473] pci_bus 0000:04: resource 1 mem: [0x40600000-0x409fffff]
[ 0.363482] pci_bus 0000:04: resource 2 pref mem [0xf0500000-0xf05fffff]
[ 0.363491] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff]
[ 0.363499] pci_bus 0000:05: resource 1 mem: [0x40a00000-0x40bfffff]
[ 0.363508] pci_bus 0000:05: resource 2 pref mem [0x40c00000-0x40dfffff]
[ 0.363517] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.363525] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.363623] NET: Registered protocol family 2
[ 0.363910] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.364873] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.366023] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.366652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.366665] TCP reno registered
[ 0.367004] NET: Registered protocol family 1
[ 0.367059] pci 0000:00:02.0: Boot video device
[ 0.367284] Simple Boot Flag at 0x36 set to 0x1
[ 0.367785] cpufreq-nforce2: No nForce2 chipset.
[ 0.367867] Scanning for low memory corruption every 60 seconds
[ 0.368199] audit: initializing netlink socket (disabled)
[ 0.368225] type=2000 audit(1306971040.366:1): initialized
[ 0.389835] highmem bounce pool size: 64 pages
[ 0.389853] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.395316] VFS: Disk quotas dquot_6.5.2
[ 0.395532] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.397617] fuse init (API version 7.13)
[ 0.397915] msgmni has been set to 1706
[ 0.398637] alg: No test for stdrng (krng)
[ 0.398881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.398891] io scheduler noop registered
[ 0.398897] io scheduler anticipatory registered
[ 0.398903] io scheduler deadline registered
[ 0.399047] io scheduler cfq registered (default)
[ 0.399400] alloc irq_desc for 24 on node -1
[ 0.399408] alloc kstat_irqs on node -1
[ 0.399431] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.399451] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.399767] alloc irq_desc for 25 on node -1
[ 0.399774] alloc kstat_irqs on node -1
[ 0.399796] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.399815] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.400093] alloc irq_desc for 26 on node -1
[ 0.400100] alloc kstat_irqs on node -1
[ 0.400118] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.400137] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.400418] alloc irq_desc for 27 on node -1
[ 0.400425] alloc kstat_irqs on node -1
[ 0.400445] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.400466] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.400734] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.401095] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.401709] ACPI: AC Adapter [ACAD] (on-line)
[ 0.401950] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.402067] ACPI: Lid Switch [LID0]
[ 0.402211] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.402221] ACPI: Power Button [PWRB]
[ 0.402406] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.402415] ACPI: Power Button [PWRF]
[ 0.404400] ACPI: SSDT 3f6d5f58 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.405798] ACPI: SSDT 3f6d5894 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.412731] Monitor-Mwait will be used to enter C-1 state
[ 0.412841] Monitor-Mwait will be used to enter C-2 state
[ 0.412928] Monitor-Mwait will be used to enter C-3 state
[ 0.412949] Marking TSC unstable due to TSC halts in idle
[ 0.413137] processor LNXCPU:00: registered as cooling_device0
[ 0.414270] ACPI: SSDT 3f6d619d 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.415263] ACPI: SSDT 3f6d5ed3 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.416620] Switching to clocksource hpet
[ 0.425584] processor LNXCPU:01: registered as cooling_device1
[ 0.451542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.455715] brd: module loaded
[ 0.456887] isapnp: Scanning for PnP cards...
[ 0.457412] loop: module loaded
[ 0.457694] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.457949] ata_piix 0000:00:1f.1: version 2.13
[ 0.457980] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.458061] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.458246] scsi0 : ata_piix
[ 0.458483] scsi1 : ata_piix
[ 0.459797] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.459806] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.460887] Fixed MDIO Bus: probed
[ 0.460997] PPP generic driver version 2.4.2
[ 0.463713] tun: Universal TUN/TAP device driver, 1.6
[ 0.463720] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.463986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.464042] alloc irq_desc for 23 on node -1
[ 0.464048] alloc kstat_irqs on node -1
[ 0.464064] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.464106] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.464115] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.464217] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.464262] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.464283] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.468192] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.468229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[ 0.472581] ata2: port disabled. ignoring.
[ 0.481233] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.481555] usb usb1: configuration #1 chosen from 1 choice
[ 0.481642] hub 1-0:1.0: USB hub found
[ 0.481668] hub 1-0:1.0: 8 ports detected
[ 0.481832] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.481876] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.481967] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.481985] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.481995] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.482118] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.482165] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.482427] usb usb2: configuration #1 chosen from 1 choice
[ 0.482507] hub 2-0:1.0: USB hub found
[ 0.482528] hub 2-0:1.0: 2 ports detected
[ 0.482655] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.482670] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.482679] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.482770] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.482832] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.483076] usb usb3: configuration #1 chosen from 1 choice
[ 0.483155] hub 3-0:1.0: USB hub found
[ 0.483174] hub 3-0:1.0: 2 ports detected
[ 0.483292] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.483307] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.483315] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.483415] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.483471] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.483714] usb usb4: configuration #1 chosen from 1 choice
[ 0.483793] hub 4-0:1.0: USB hub found
[ 0.483812] hub 4-0:1.0: 2 ports detected
[ 0.483928] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.483946] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.483955] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.484049] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.484106] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.484359] usb usb5: configuration #1 chosen from 1 choice
[ 0.484445] hub 5-0:1.0: USB hub found
[ 0.484465] hub 5-0:1.0: 2 ports detected
[ 0.484702] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.576557] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.581456] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.581885] mice: PS/2 mouse device common for all mice
[ 0.582278] rtc_cmos 00:06: RTC can wake from S4
[ 0.582393] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.582445] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.582775] device-mapper: uevent: version 1.0.3
[ 0.589776] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.599694] device-mapper: multipath: version 1.1.0 loaded
[ 0.599704] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.605819] EISA: Probing bus 0 at eisa.0
[ 0.605834] Cannot allocate resource for EISA slot 1
[ 0.605842] Cannot allocate resource for EISA slot 2
[ 0.605848] Cannot allocate resource for EISA slot 3
[ 0.605855] Cannot allocate resource for EISA slot 4
[ 0.605862] Cannot allocate resource for EISA slot 5
[ 0.605885] EISA: Detected 0 cards.
[ 0.621345] cpuidle: using governor ladder
[ 0.621685] cpuidle: using governor menu
[ 0.622923] TCP cubic registered
[ 0.623444] NET: Registered protocol family 10
[ 0.624729] lo: Disabled Privacy Extensions
[ 0.625818] NET: Registered protocol family 17
[ 0.627278] Using IPI No-Shortcut mode
[ 0.627538] PM: Resume from disk failed.
[ 0.627567] registered taskstats version 1
[ 0.628389] Magic number: 15:990:553
[ 0.628461] pci_link PNP0C0F:04: hash matches
[ 0.628535] rtc_cmos 00:06: setting system clock to 2011-06-01 23:30:41 UTC (1306971041)
[ 0.628544] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.628550] EDD information not available.
[ 0.636318] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.812192] isapnp: No Plug & Play device found
[ 0.868109] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 0.884800] ACPI: Battery Slot [BAT1] (battery present)
[ 0.998306] Freeing initrd memory: 13103k freed
[ 1.011096] Freeing unused kernel memory: 664k freed
[ 1.011907] Write protecting the kernel text: 4688k
[ 1.011985] Write protecting the kernel read-only data: 1844k
[ 1.054863] udev: starting version 151
[ 1.169464] usb 1-2: configuration #1 chosen from 1 choice
[ 1.233798] ahci 0000:00:1f.2: version 3.0
[ 1.233835] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.233919] alloc irq_desc for 28 on node -1
[ 1.233927] alloc kstat_irqs on node -1
[ 1.233951] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.234097] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.234111] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.234124] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.269678] scsi2 : ahci
[ 1.300088] scsi3 : ahci
[ 1.338783] scsi4 : ahci
[ 1.369767] Linux agpgart interface v0.103
[ 1.370030] scsi5 : ahci
[ 1.370529] ata3: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444500 irq 28
[ 1.370539] ata4: DUMMY
[ 1.370548] ata5: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444600 irq 28
[ 1.370555] ata6: DUMMY
[ 1.402848] acpi device:00: registered as cooling_device2
[ 1.403230] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.403359] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.403836] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.403899] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.404053] r8169 0000:04:00.0: setting latency timer to 64
[ 1.404242] alloc irq_desc for 29 on node -1
[ 1.404249] alloc kstat_irqs on node -1
[ 1.404312] r8169 0000:04:00.0: irq 29 for MSI/MSI-X
[ 1.406358] eth0: RTL8102e at 0xf8102000, 00:26:22:33:cc:64, XID 04c00000 IRQ 29
[ 1.417142] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.417515] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.420396] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.688200] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.688266] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.689771] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.744267] ata3.00: ATA-8: TOSHIBA MK1655GSX, FG011M, max UDMA/100
[ 1.744292] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.749326] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.752257] ata3.00: configured for UDMA/100
[ 1.768522] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1655GS FG01 PQ: 0 ANSI: 5
[ 1.769078] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.769123] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.769368] sd 2:0:0:0: [sda] Write Protect is off
[ 1.769378] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.769494] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.770027] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.905502] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.978742] [drm] Initialized drm 1.1.0 20060810
[ 2.044290] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.044302] i915 0000:00:02.0: setting latency timer to 64
[ 2.055936] [drm] set up 7M of stolen space
[ 2.158905] [drm] initialized overlay support
[ 2.559424] fb0: inteldrmfb frame buffer device
[ 2.559432] registered panic notifier
[ 2.559450] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.564486] vga16fb: initializing
[ 2.564496] vga16fb: mapped to 0xc00a0000
[ 2.564506] vga16fb: not registering due to another framebuffer present
[ 2.892789] Console: switching to colour frame buffer device 128x37
[ 3.574699] xor: automatically using best checksumming function: pIII_sse
[ 3.593021] pIII_sse : 4844.000 MB/sec
[ 3.593027] xor: using function: pIII_sse (4844.000 MB/sec)
[ 3.603254] device-mapper: dm-raid45: initialized v0.2594b
[ 3.913230] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 36.416623] udev: starting version 151
[ 36.461605] Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 across:2096440k
[ 36.653646] lp: driver loaded but no devices found
[ 36.977434] intel_rng: FWH not detected
[ 37.311867] cfg80211: Calling CRDA to update world regulatory domain
[ 37.348694] cfg80211: World regulatory domain updated:
[ 37.348705] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 37.348715] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.348724] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 37.348733] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 37.348742] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.348751] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.382804] Linux video capture interface: v2.00
[ 37.480546] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b128)
[ 37.517912] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input6
[ 37.518085] usbcore: registered new interface driver uvcvideo
[ 37.518097] USB Video Class driver (v0.1.0)
[ 37.519661] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 37.519695] ath9k 0000:03:00.0: setting latency timer to 64
[ 37.571181] ath: EEPROM regdomain: 0x65
[ 37.571191] ath: EEPROM indicates we should expect a direct regpair map
[ 37.571202] ath: Country alpha2 being used: 00
[ 37.571208] ath: Regpair used: 0x65
[ 37.575447] type=1505 audit(1306960278.444:2): operation="profile_load" pid=670 name="/sbin/dhclient3"
[ 37.578238] type=1505 audit(1306960278.448:3): operation="profile_load" pid=670 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 37.578751] type=1505 audit(1306960278.448:4): operation="profile_load" pid=670 name="/usr/lib/connman/scripts/dhclient-script"
[ 37.622052] type=1505 audit(1306960278.492:5): operation="profile_replace" pid=686 name="/sbin/dhclient3"
[ 37.622919] type=1505 audit(1306960278.492:6): operation="profile_replace" pid=686 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 37.623433] type=1505 audit(1306960278.492:7): operation="profile_replace" pid=686 name="/usr/lib/connman/scripts/dhclient-script"
[ 37.851667] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 37.854035] Registered led device: ath9k-phy0::radio
[ 37.854101] Registered led device: ath9k-phy0::assoc
[ 37.854166] Registered led device: ath9k-phy0::tx
[ 37.854229] Registered led device: ath9k-phy0::rx
[ 37.854284] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8660000, irq=17
[ 38.017630] alloc irq_desc for 22 on node -1
[ 38.017639] alloc kstat_irqs on node -1
[ 38.017659] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 38.017750] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 38.050477] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 38.130837] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 38.577285] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 38.608041] type=1505 audit(1306960279.479:8): operation="profile_replace" pid=875 name="/sbin/dhclient3"
[ 38.608991] type=1505 audit(1306960279.479:9): operation="profile_replace" pid=875 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 38.609701] type=1505 audit(1306960279.479:10): operation="profile_replace" pid=875 name="/usr/lib/connman/scripts/dhclient-script"
[ 38.645033] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 38.679782] type=1505 audit(1306960279.547:11): operation="profile_load" pid=886 name="/usr/lib/cups/backend/cups-pdf"
[ 38.790429] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.807744] r8169: eth0: link down
[ 38.810567] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.218291] ppdev: user-space parallel port driver
[ 39.937516] CPU0 attaching NULL sched-domain.
[ 39.937529] CPU1 attaching NULL sched-domain.
[ 39.960295] CPU0 attaching sched-domain:
[ 39.960304] domain 0: span 0-1 level SIBLING
[ 39.960311] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 39.960324] domain 1: span 0-1 level MC
[ 39.960329] groups: 0-1 (cpu_power = 1178)
[ 39.960341] CPU1 attaching sched-domain:
[ 39.960346] domain 0: span 0-1 level SIBLING
[ 39.960351] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 39.960363] domain 1: span 0-1 level MC
[ 39.960368] groups: 0-1 (cpu_power = 1178)
[ 42.638204] CPU0 attaching NULL sched-domain.
[ 42.638222] CPU1 attaching NULL sched-domain.
[ 42.664449] CPU0 attaching sched-domain:
[ 42.664462] domain 0: span 0-1 level SIBLING
[ 42.664471] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 42.664492] domain 1: span 0-1 level MC
[ 42.664500] groups: 0-1 (cpu_power = 1178)
[ 42.664518] CPU1 attaching sched-domain:
[ 42.664526] domain 0: span 0-1 level SIBLING
[ 42.664534] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 42.664552] domain 1: span 0-1 level MC
[ 42.664559] groups: 0-1 (cpu_power = 1178)
orpheas@orpheas-laptop:~$

2. lsmod (λείπει η αρχή):

Κώδικας: Επιλογή όλων

[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.180104] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.180121] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.184040] Brought up 2 CPUs
[ 0.184047] Total of 2 processors activated (6383.96 BogoMIPS).
[ 0.184326] CPU0 attaching sched-domain:
[ 0.184334] domain 0: span 0-1 level SIBLING
[ 0.184340] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.184353] domain 1: span 0-1 level MC
[ 0.184358] groups: 0-1 (cpu_power = 1178)
[ 0.184371] CPU1 attaching sched-domain:
[ 0.184376] domain 0: span 0-1 level SIBLING
[ 0.184381] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.184393] domain 1: span 0-1 level MC
[ 0.184398] groups: 0-1 (cpu_power = 1178)
[ 0.184576] devtmpfs: initialized
[ 0.184576] regulator: core version 0.5
[ 0.184576] Time: 23:30:40 Date: 06/01/11
[ 0.184576] NET: Registered protocol family 16
[ 0.184576] Trying to unpack rootfs image as initramfs...
[ 0.184578] EISA bus registered
[ 0.184603] ACPI: bus type pci registered
[ 0.184785] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.184795] PCI: MCFG area at e0000000 reserved in E820
[ 0.184801] PCI: Using MMCONFIG for extended config space
[ 0.184807] PCI: Using configuration type 1 for base access
[ 0.190223] bio: create slab <bio-0> at 0
[ 0.192808] ACPI: EC: Look up EC in DSDT
[ 0.201147] ACPI: BIOS _OSI(Linux) query ignored
[ 0.204701] ACPI: Interpreter enabled
[ 0.204714] ACPI: (supports S0 S3 S4 S5)
[ 0.204782] ACPI: Using IOAPIC for interrupt routing
[ 0.258552] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.259351] ACPI: No dock devices found.
[ 0.260832] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.261033] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf007ffff]
[ 0.261046] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.261059] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.261071] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0200000-0xf023ffff]
[ 0.261139] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0080000-0xf00fffff]
[ 0.261317] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0440000-0xf0443fff]
[ 0.261406] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.261417] pci 0000:00:1b.0: PME# disabled
[ 0.261551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.261562] pci 0000:00:1c.0: PME# disabled
[ 0.261698] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.261709] pci 0000:00:1c.1: PME# disabled
[ 0.261844] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.261855] pci 0000:00:1c.2: PME# disabled
[ 0.261999] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.262011] pci 0000:00:1c.3: PME# disabled
[ 0.262109] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.262206] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.262302] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.262398] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.262500] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0444000-0xf04443ff]
[ 0.262589] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.262599] pci 0000:00:1d.7: PME# disabled
[ 0.262839] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.262851] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.262862] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.262873] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 007f)
[ 0.262886] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.262960] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.262976] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.262991] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.263006] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.263022] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.263117] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.263133] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.263148] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.263163] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.263179] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.263194] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0444400-0xf04447ff]
[ 0.263248] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.263259] pci 0000:00:1f.2: PME# disabled
[ 0.263343] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.263610] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0100000-0xf010ffff]
[ 0.263763] pci 0000:03:00.0: supports D1
[ 0.263770] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.263784] pci 0000:03:00.0: PME# disabled
[ 0.263916] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[ 0.264143] pci 0000:04:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.264245] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xf0510000-0xf0510fff]
[ 0.264319] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xf0500000-0xf050ffff]
[ 0.264368] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.264550] pci 0000:04:00.0: supports D1 D2
[ 0.264558] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.264590] pci 0000:04:00.0: PME# disabled
[ 0.264776] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.264796] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0500000-0xf05fffff]
[ 0.264975] pci 0000:00:1e.0: transparent bridge
[ 0.265038] pci_bus 0000:00: on NUMA node 0
[ 0.265059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.265644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.265884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.266133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.266362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.266679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.290551] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.290853] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.291142] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.291426] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.291727] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.292055] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.292345] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.292642] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.293004] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.293039] vgaarb: loaded
[ 0.293392] SCSI subsystem initialized
[ 0.293638] libata version 3.00 loaded.
[ 0.293885] usbcore: registered new interface driver usbfs
[ 0.293927] usbcore: registered new interface driver hub
[ 0.294016] usbcore: registered new device driver usb
[ 0.294522] ACPI: WMI: Mapper loaded
[ 0.294530] PCI: Using ACPI for IRQ routing
[ 0.294958] NetLabel: Initializing
[ 0.294966] NetLabel: domain hash size = 128
[ 0.294971] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.295007] NetLabel: unlabeled traffic allowed by default
[ 0.295123] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.295139] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.300333] Switching to clocksource tsc
[ 0.304986] AppArmor: AppArmor Filesystem Enabled
[ 0.305026] pnp: PnP ACPI init
[ 0.305073] ACPI: bus type pnp registered
[ 0.327409] pnp: PnP ACPI: found 9 devices
[ 0.327420] ACPI: ACPI bus type pnp unregistered
[ 0.327430] PnPBIOS: Disabled by ACPI PNP
[ 0.327467] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.327478] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.327489] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.327500] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.327510] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.327520] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.327531] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.327543] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.327571] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.327608] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.327620] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.327631] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.327643] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.327654] system 00:05: ioport range 0xff2c-0xff7f has been reserved
[ 0.362901] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.362918] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.362932] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.362944] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.362961] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.362970] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.362983] pci 0000:00:1c.1: MEM window: 0xf0100000-0xf01fffff
[ 0.362995] pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.363013] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.363022] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.363035] pci 0000:00:1c.2: MEM window: 0x40600000-0x409fffff
[ 0.363046] pci 0000:00:1c.2: PREFETCH window: 0x000000f0500000-0x000000f05fffff
[ 0.363062] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.363071] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.363084] pci 0000:00:1c.3: MEM window: 0x40a00000-0x40bfffff
[ 0.363095] pci 0000:00:1c.3: PREFETCH window: 0x00000040c00000-0x00000040dfffff
[ 0.363111] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.363117] pci 0000:00:1e.0: IO window: disabled
[ 0.363129] pci 0000:00:1e.0: MEM window: disabled
[ 0.363138] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.363178] alloc irq_desc for 17 on node -1
[ 0.363185] alloc kstat_irqs on node -1
[ 0.363202] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.363215] pci 0000:00:1c.0: setting latency timer to 64
[ 0.363237] alloc irq_desc for 16 on node -1
[ 0.363243] alloc kstat_irqs on node -1
[ 0.363255] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.363266] pci 0000:00:1c.1: setting latency timer to 64
[ 0.363287] alloc irq_desc for 18 on node -1
[ 0.363293] alloc kstat_irqs on node -1
[ 0.363304] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.363315] pci 0000:00:1c.2: setting latency timer to 64
[ 0.363337] alloc irq_desc for 19 on node -1
[ 0.363343] alloc kstat_irqs on node -1
[ 0.363354] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.363366] pci 0000:00:1c.3: setting latency timer to 64
[ 0.363383] pci 0000:00:1e.0: setting latency timer to 64
[ 0.363395] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.363404] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.363413] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.363422] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.363430] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.363439] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.363447] pci_bus 0000:03: resource 1 mem: [0xf0100000-0xf01fffff]
[ 0.363456] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.363465] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 0.363473] pci_bus 0000:04: resource 1 mem: [0x40600000-0x409fffff]
[ 0.363482] pci_bus 0000:04: resource 2 pref mem [0xf0500000-0xf05fffff]
[ 0.363491] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff]
[ 0.363499] pci_bus 0000:05: resource 1 mem: [0x40a00000-0x40bfffff]
[ 0.363508] pci_bus 0000:05: resource 2 pref mem [0x40c00000-0x40dfffff]
[ 0.363517] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.363525] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.363623] NET: Registered protocol family 2
[ 0.363910] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.364873] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.366023] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.366652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.366665] TCP reno registered
[ 0.367004] NET: Registered protocol family 1
[ 0.367059] pci 0000:00:02.0: Boot video device
[ 0.367284] Simple Boot Flag at 0x36 set to 0x1
[ 0.367785] cpufreq-nforce2: No nForce2 chipset.
[ 0.367867] Scanning for low memory corruption every 60 seconds
[ 0.368199] audit: initializing netlink socket (disabled)
[ 0.368225] type=2000 audit(1306971040.366:1): initialized
[ 0.389835] highmem bounce pool size: 64 pages
[ 0.389853] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.395316] VFS: Disk quotas dquot_6.5.2
[ 0.395532] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.397617] fuse init (API version 7.13)
[ 0.397915] msgmni has been set to 1706
[ 0.398637] alg: No test for stdrng (krng)
[ 0.398881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.398891] io scheduler noop registered
[ 0.398897] io scheduler anticipatory registered
[ 0.398903] io scheduler deadline registered
[ 0.399047] io scheduler cfq registered (default)
[ 0.399400] alloc irq_desc for 24 on node -1
[ 0.399408] alloc kstat_irqs on node -1
[ 0.399431] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.399451] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.399767] alloc irq_desc for 25 on node -1
[ 0.399774] alloc kstat_irqs on node -1
[ 0.399796] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.399815] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.400093] alloc irq_desc for 26 on node -1
[ 0.400100] alloc kstat_irqs on node -1
[ 0.400118] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.400137] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.400418] alloc irq_desc for 27 on node -1
[ 0.400425] alloc kstat_irqs on node -1
[ 0.400445] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.400466] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.400734] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.401095] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.401709] ACPI: AC Adapter [ACAD] (on-line)
[ 0.401950] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.402067] ACPI: Lid Switch [LID0]
[ 0.402211] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.402221] ACPI: Power Button [PWRB]
[ 0.402406] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.402415] ACPI: Power Button [PWRF]
[ 0.404400] ACPI: SSDT 3f6d5f58 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.405798] ACPI: SSDT 3f6d5894 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.412731] Monitor-Mwait will be used to enter C-1 state
[ 0.412841] Monitor-Mwait will be used to enter C-2 state
[ 0.412928] Monitor-Mwait will be used to enter C-3 state
[ 0.412949] Marking TSC unstable due to TSC halts in idle
[ 0.413137] processor LNXCPU:00: registered as cooling_device0
[ 0.414270] ACPI: SSDT 3f6d619d 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.415263] ACPI: SSDT 3f6d5ed3 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.416620] Switching to clocksource hpet
[ 0.425584] processor LNXCPU:01: registered as cooling_device1
[ 0.451542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.455715] brd: module loaded
[ 0.456887] isapnp: Scanning for PnP cards...
[ 0.457412] loop: module loaded
[ 0.457694] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.457949] ata_piix 0000:00:1f.1: version 2.13
[ 0.457980] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.458061] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.458246] scsi0 : ata_piix
[ 0.458483] scsi1 : ata_piix
[ 0.459797] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.459806] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.460887] Fixed MDIO Bus: probed
[ 0.460997] PPP generic driver version 2.4.2
[ 0.463713] tun: Universal TUN/TAP device driver, 1.6
[ 0.463720] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.463986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.464042] alloc irq_desc for 23 on node -1
[ 0.464048] alloc kstat_irqs on node -1
[ 0.464064] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.464106] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.464115] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.464217] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.464262] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.464283] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.468192] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.468229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[ 0.472581] ata2: port disabled. ignoring.
[ 0.481233] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.481555] usb usb1: configuration #1 chosen from 1 choice
[ 0.481642] hub 1-0:1.0: USB hub found
[ 0.481668] hub 1-0:1.0: 8 ports detected
[ 0.481832] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.481876] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.481967] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.481985] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.481995] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.482118] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.482165] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.482427] usb usb2: configuration #1 chosen from 1 choice
[ 0.482507] hub 2-0:1.0: USB hub found
[ 0.482528] hub 2-0:1.0: 2 ports detected
[ 0.482655] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.482670] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.482679] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.482770] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.482832] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.483076] usb usb3: configuration #1 chosen from 1 choice
[ 0.483155] hub 3-0:1.0: USB hub found
[ 0.483174] hub 3-0:1.0: 2 ports detected
[ 0.483292] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.483307] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.483315] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.483415] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.483471] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.483714] usb usb4: configuration #1 chosen from 1 choice
[ 0.483793] hub 4-0:1.0: USB hub found
[ 0.483812] hub 4-0:1.0: 2 ports detected
[ 0.483928] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.483946] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.483955] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.484049] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.484106] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.484359] usb usb5: configuration #1 chosen from 1 choice
[ 0.484445] hub 5-0:1.0: USB hub found
[ 0.484465] hub 5-0:1.0: 2 ports detected
[ 0.484702] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.576557] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.581456] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.581885] mice: PS/2 mouse device common for all mice
[ 0.582278] rtc_cmos 00:06: RTC can wake from S4
[ 0.582393] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.582445] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.582775] device-mapper: uevent: version 1.0.3
[ 0.589776] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.599694] device-mapper: multipath: version 1.1.0 loaded
[ 0.599704] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.605819] EISA: Probing bus 0 at eisa.0
[ 0.605834] Cannot allocate resource for EISA slot 1
[ 0.605842] Cannot allocate resource for EISA slot 2
[ 0.605848] Cannot allocate resource for EISA slot 3
[ 0.605855] Cannot allocate resource for EISA slot 4
[ 0.605862] Cannot allocate resource for EISA slot 5
[ 0.605885] EISA: Detected 0 cards.
[ 0.621345] cpuidle: using governor ladder
[ 0.621685] cpuidle: using governor menu
[ 0.622923] TCP cubic registered
[ 0.623444] NET: Registered protocol family 10
[ 0.624729] lo: Disabled Privacy Extensions
[ 0.625818] NET: Registered protocol family 17
[ 0.627278] Using IPI No-Shortcut mode
[ 0.627538] PM: Resume from disk failed.
[ 0.627567] registered taskstats version 1
[ 0.628389] Magic number: 15:990:553
[ 0.628461] pci_link PNP0C0F:04: hash matches
[ 0.628535] rtc_cmos 00:06: setting system clock to 2011-06-01 23:30:41 UTC (1306971041)
[ 0.628544] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.628550] EDD information not available.
[ 0.636318] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.812192] isapnp: No Plug & Play device found
[ 0.868109] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 0.884800] ACPI: Battery Slot [BAT1] (battery present)
[ 0.998306] Freeing initrd memory: 13103k freed
[ 1.011096] Freeing unused kernel memory: 664k freed
[ 1.011907] Write protecting the kernel text: 4688k
[ 1.011985] Write protecting the kernel read-only data: 1844k
[ 1.054863] udev: starting version 151
[ 1.169464] usb 1-2: configuration #1 chosen from 1 choice
[ 1.233798] ahci 0000:00:1f.2: version 3.0
[ 1.233835] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.233919] alloc irq_desc for 28 on node -1
[ 1.233927] alloc kstat_irqs on node -1
[ 1.233951] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.234097] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.234111] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.234124] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.269678] scsi2 : ahci
[ 1.300088] scsi3 : ahci
[ 1.338783] scsi4 : ahci
[ 1.369767] Linux agpgart interface v0.103
[ 1.370030] scsi5 : ahci
[ 1.370529] ata3: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444500 irq 28
[ 1.370539] ata4: DUMMY
[ 1.370548] ata5: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444600 irq 28
[ 1.370555] ata6: DUMMY
[ 1.402848] acpi device:00: registered as cooling_device2
[ 1.403230] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.403359] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.403836] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.403899] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.404053] r8169 0000:04:00.0: setting latency timer to 64
[ 1.404242] alloc irq_desc for 29 on node -1
[ 1.404249] alloc kstat_irqs on node -1
[ 1.404312] r8169 0000:04:00.0: irq 29 for MSI/MSI-X
[ 1.406358] eth0: RTL8102e at 0xf8102000, 00:26:22:33:cc:64, XID 04c00000 IRQ 29
[ 1.417142] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.417515] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.420396] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.688200] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.688266] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.689771] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.180104] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.180121] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.184040] Brought up 2 CPUs
[ 0.184047] Total of 2 processors activated (6383.96 BogoMIPS).
[ 0.184326] CPU0 attaching sched-domain:
[ 0.184334] domain 0: span 0-1 level SIBLING
[ 0.184340] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.184353] domain 1: span 0-1 level MC
[ 0.184358] groups: 0-1 (cpu_power = 1178)
[ 0.184371] CPU1 attaching sched-domain:
[ 0.184376] domain 0: span 0-1 level SIBLING
[ 0.184381] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.184393] domain 1: span 0-1 level MC
[ 0.184398] groups: 0-1 (cpu_power = 1178)
[ 0.184576] devtmpfs: initialized
[ 0.184576] regulator: core version 0.5
[ 0.184576] Time: 23:30:40 Date: 06/01/11
[ 0.184576] NET: Registered protocol family 16
[ 0.184576] Trying to unpack rootfs image as initramfs...
[ 0.184578] EISA bus registered
[ 0.184603] ACPI: bus type pci registered
[ 0.184785] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.184795] PCI: MCFG area at e0000000 reserved in E820
[ 0.184801] PCI: Using MMCONFIG for extended config space
[ 0.184807] PCI: Using configuration type 1 for base access
[ 0.190223] bio: create slab <bio-0> at 0
[ 0.192808] ACPI: EC: Look up EC in DSDT
[ 0.201147] ACPI: BIOS _OSI(Linux) query ignored
[ 0.204701] ACPI: Interpreter enabled
[ 0.204714] ACPI: (supports S0 S3 S4 S5)
[ 0.204782] ACPI: Using IOAPIC for interrupt routing
[ 0.258552] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.259351] ACPI: No dock devices found.
[ 0.260832] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.261033] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf007ffff]
[ 0.261046] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.261059] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.261071] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0200000-0xf023ffff]
[ 0.261139] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0080000-0xf00fffff]
[ 0.261317] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0440000-0xf0443fff]
[ 0.261406] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.261417] pci 0000:00:1b.0: PME# disabled
[ 0.261551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.261562] pci 0000:00:1c.0: PME# disabled
[ 0.261698] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.261709] pci 0000:00:1c.1: PME# disabled
[ 0.261844] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.261855] pci 0000:00:1c.2: PME# disabled
[ 0.261999] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.262011] pci 0000:00:1c.3: PME# disabled
[ 0.262109] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.262206] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.262302] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.262398] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.262500] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0444000-0xf04443ff]
[ 0.262589] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.262599] pci 0000:00:1d.7: PME# disabled
[ 0.262839] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.262851] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.262862] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.262873] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 007f)
[ 0.262886] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.262960] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.262976] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.262991] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.263006] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.263022] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.263117] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.263133] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.263148] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.263163] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.263179] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.263194] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0444400-0xf04447ff]
[ 0.263248] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.263259] pci 0000:00:1f.2: PME# disabled
[ 0.263343] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.263610] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0100000-0xf010ffff]
[ 0.263763] pci 0000:03:00.0: supports D1
[ 0.263770] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.263784] pci 0000:03:00.0: PME# disabled
[ 0.263916] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[ 0.264143] pci 0000:04:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.264245] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xf0510000-0xf0510fff]
[ 0.264319] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xf0500000-0xf050ffff]
[ 0.264368] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.264550] pci 0000:04:00.0: supports D1 D2
[ 0.264558] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.264590] pci 0000:04:00.0: PME# disabled
[ 0.264776] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.264796] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0500000-0xf05fffff]
[ 0.264975] pci 0000:00:1e.0: transparent bridge
[ 0.265038] pci_bus 0000:00: on NUMA node 0
[ 0.265059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.265644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.265884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.266133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.266362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.266679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.290551] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.290853] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.291142] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.291426] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.291727] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.292055] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.292345] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.292642] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.293004] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.293039] vgaarb: loaded
[ 0.293392] SCSI subsystem initialized
[ 0.293638] libata version 3.00 loaded.
[ 0.293885] usbcore: registered new interface driver usbfs
[ 0.293927] usbcore: registered new interface driver hub
[ 0.294016] usbcore: registered new device driver usb
[ 0.294522] ACPI: WMI: Mapper loaded
[ 0.294530] PCI: Using ACPI for IRQ routing
[ 0.294958] NetLabel: Initializing
[ 0.294966] NetLabel: domain hash size = 128
[ 0.294971] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.295007] NetLabel: unlabeled traffic allowed by default
[ 0.295123] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.295139] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.300333] Switching to clocksource tsc
[ 0.304986] AppArmor: AppArmor Filesystem Enabled
[ 0.305026] pnp: PnP ACPI init
[ 0.305073] ACPI: bus type pnp registered
[ 0.327409] pnp: PnP ACPI: found 9 devices
[ 0.327420] ACPI: ACPI bus type pnp unregistered
[ 0.327430] PnPBIOS: Disabled by ACPI PNP
[ 0.327467] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.327478] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.327489] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.327500] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.327510] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.327520] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.327531] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.327543] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.327571] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.327608] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.327620] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.327631] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.327643] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.327654] system 00:05: ioport range 0xff2c-0xff7f has been reserved
[ 0.362901] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.362918] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.362932] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.362944] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.362961] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.362970] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.362983] pci 0000:00:1c.1: MEM window: 0xf0100000-0xf01fffff
[ 0.362995] pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.363013] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.363022] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.363035] pci 0000:00:1c.2: MEM window: 0x40600000-0x409fffff
[ 0.363046] pci 0000:00:1c.2: PREFETCH window: 0x000000f0500000-0x000000f05fffff
[ 0.363062] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.363071] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.363084] pci 0000:00:1c.3: MEM window: 0x40a00000-0x40bfffff
[ 0.363095] pci 0000:00:1c.3: PREFETCH window: 0x00000040c00000-0x00000040dfffff
[ 0.363111] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.363117] pci 0000:00:1e.0: IO window: disabled
[ 0.363129] pci 0000:00:1e.0: MEM window: disabled
[ 0.363138] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.363178] alloc irq_desc for 17 on node -1
[ 0.363185] alloc kstat_irqs on node -1
[ 0.363202] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.363215] pci 0000:00:1c.0: setting latency timer to 64
[ 0.363237] alloc irq_desc for 16 on node -1
[ 0.363243] alloc kstat_irqs on node -1
[ 0.363255] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.363266] pci 0000:00:1c.1: setting latency timer to 64
[ 0.363287] alloc irq_desc for 18 on node -1
[ 0.363293] alloc kstat_irqs on node -1
[ 0.363304] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.363315] pci 0000:00:1c.2: setting latency timer to 64
[ 0.363337] alloc irq_desc for 19 on node -1
[ 0.363343] alloc kstat_irqs on node -1
[ 0.363354] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.363366] pci 0000:00:1c.3: setting latency timer to 64
[ 0.363383] pci 0000:00:1e.0: setting latency timer to 64
[ 0.363395] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.363404] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.363413] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.363422] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.363430] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.363439] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.363447] pci_bus 0000:03: resource 1 mem: [0xf0100000-0xf01fffff]
[ 0.363456] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.363465] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 0.363473] pci_bus 0000:04: resource 1 mem: [0x40600000-0x409fffff]
[ 0.363482] pci_bus 0000:04: resource 2 pref mem [0xf0500000-0xf05fffff]
[ 0.363491] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff]
[ 0.363499] pci_bus 0000:05: resource 1 mem: [0x40a00000-0x40bfffff]
[ 0.363508] pci_bus 0000:05: resource 2 pref mem [0x40c00000-0x40dfffff]
[ 0.363517] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.363525] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.363623] NET: Registered protocol family 2
[ 0.363910] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.364873] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.366023] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.366652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.366665] TCP reno registered
[ 0.367004] NET: Registered protocol family 1
[ 0.367059] pci 0000:00:02.0: Boot video device
[ 0.367284] Simple Boot Flag at 0x36 set to 0x1
[ 0.367785] cpufreq-nforce2: No nForce2 chipset.
[ 0.367867] Scanning for low memory corruption every 60 seconds
[ 0.368199] audit: initializing netlink socket (disabled)
[ 0.368225] type=2000 audit(1306971040.366:1): initialized
[ 0.389835] highmem bounce pool size: 64 pages
[ 0.389853] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.395316] VFS: Disk quotas dquot_6.5.2
[ 0.395532] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.397617] fuse init (API version 7.13)
[ 0.397915] msgmni has been set to 1706
[ 0.398637] alg: No test for stdrng (krng)
[ 0.398881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.398891] io scheduler noop registered
[ 0.398897] io scheduler anticipatory registered
[ 0.398903] io scheduler deadline registered
[ 0.399047] io scheduler cfq registered (default)
[ 0.399400] alloc irq_desc for 24 on node -1
[ 0.399408] alloc kstat_irqs on node -1
[ 0.399431] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.399451] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.399767] alloc irq_desc for 25 on node -1
[ 0.399774] alloc kstat_irqs on node -1
[ 0.399796] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.399815] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.400093] alloc irq_desc for 26 on node -1
[ 0.400100] alloc kstat_irqs on node -1
[ 0.400118] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.400137] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.400418] alloc irq_desc for 27 on node -1
[ 0.400425] alloc kstat_irqs on node -1
[ 0.400445] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.400466] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.400734] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.401095] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.401709] ACPI: AC Adapter [ACAD] (on-line)
[ 0.401950] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.402067] ACPI: Lid Switch [LID0]
[ 0.402211] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.402221] ACPI: Power Button [PWRB]
[ 0.402406] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.402415] ACPI: Power Button [PWRF]
[ 0.404400] ACPI: SSDT 3f6d5f58 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.405798] ACPI: SSDT 3f6d5894 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.412731] Monitor-Mwait will be used to enter C-1 state
[ 0.412841] Monitor-Mwait will be used to enter C-2 state
[ 0.412928] Monitor-Mwait will be used to enter C-3 state
[ 0.412949] Marking TSC unstable due to TSC halts in idle
[ 0.413137] processor LNXCPU:00: registered as cooling_device0
[ 0.414270] ACPI: SSDT 3f6d619d 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.415263] ACPI: SSDT 3f6d5ed3 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.416620] Switching to clocksource hpet
[ 0.425584] processor LNXCPU:01: registered as cooling_device1
[ 0.451542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.455715] brd: module loaded
[ 0.456887] isapnp: Scanning for PnP cards...
[ 0.457412] loop: module loaded
[ 0.457694] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.457949] ata_piix 0000:00:1f.1: version 2.13
[ 0.457980] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.458061] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.458246] scsi0 : ata_piix
[ 0.458483] scsi1 : ata_piix
[ 0.459797] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.459806] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.460887] Fixed MDIO Bus: probed
[ 0.460997] PPP generic driver version 2.4.2
[ 0.463713] tun: Universal TUN/TAP device driver, 1.6
[ 0.463720] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.463986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.464042] alloc irq_desc for 23 on node -1
[ 0.464048] alloc kstat_irqs on node -1
[ 0.464064] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.464106] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.464115] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.464217] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.464262] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.464283] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.468192] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.468229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[ 0.472581] ata2: port disabled. ignoring.
[ 0.481233] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.481555] usb usb1: configuration #1 chosen from 1 choice
[ 0.481642] hub 1-0:1.0: USB hub found
[ 0.481668] hub 1-0:1.0: 8 ports detected
[ 0.481832] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.481876] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.481967] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.481985] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.481995] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.482118] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.482165] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.482427] usb usb2: configuration #1 chosen from 1 choice
[ 0.482507] hub 2-0:1.0: USB hub found
[ 0.482528] hub 2-0:1.0: 2 ports detected
[ 0.482655] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.482670] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.482679] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.482770] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.482832] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.483076] usb usb3: configuration #1 chosen from 1 choice
[ 0.483155] hub 3-0:1.0: USB hub found
[ 0.483174] hub 3-0:1.0: 2 ports detected
[ 0.483292] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.483307] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.483315] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.483415] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.483471] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.483714] usb usb4: configuration #1 chosen from 1 choice
[ 0.483793] hub 4-0:1.0: USB hub found
[ 0.483812] hub 4-0:1.0: 2 ports detected
[ 0.483928] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.483946] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.483955] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.484049] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.484106] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.484359] usb usb5: configuration #1 chosen from 1 choice
[ 0.484445] hub 5-0:1.0: USB hub found
[ 0.484465] hub 5-0:1.0: 2 ports detected
[ 0.484702] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.576557] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.581456] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.581885] mice: PS/2 mouse device common for all mice
[ 0.582278] rtc_cmos 00:06: RTC can wake from S4
[ 0.582393] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.582445] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.582775] device-mapper: uevent: version 1.0.3
[ 0.589776] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.599694] device-mapper: multipath: version 1.1.0 loaded
[ 0.599704] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.605819] EISA: Probing bus 0 at eisa.0
[ 0.605834] Cannot allocate resource for EISA slot 1
[ 0.605842] Cannot allocate resource for EISA slot 2
[ 0.605848] Cannot allocate resource for EISA slot 3
[ 0.605855] Cannot allocate resource for EISA slot 4
[ 0.605862] Cannot allocate resource for EISA slot 5
[ 0.605885] EISA: Detected 0 cards.
[ 0.621345] cpuidle: using governor ladder
[ 0.621685] cpuidle: using governor menu
[ 0.622923] TCP cubic registered
[ 0.623444] NET: Registered protocol family 10
[ 0.624729] lo: Disabled Privacy Extensions
[ 0.625818] NET: Registered protocol family 17
[ 0.627278] Using IPI No-Shortcut mode
[ 0.627538] PM: Resume from disk failed.
[ 0.627567] registered taskstats version 1
[ 0.628389] Magic number: 15:990:553
[ 0.628461] pci_link PNP0C0F:04: hash matches
[ 0.628535] rtc_cmos 00:06: setting system clock to 2011-06-01 23:30:41 UTC (1306971041)
[ 0.628544] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.628550] EDD information not available.
[ 0.636318] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.812192] isapnp: No Plug & Play device found
[ 0.868109] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 0.884800] ACPI: Battery Slot [BAT1] (battery present)
[ 0.998306] Freeing initrd memory: 13103k freed
[ 1.011096] Freeing unused kernel memory: 664k freed
[ 1.011907] Write protecting the kernel text: 4688k
[ 1.011985] Write protecting the kernel read-only data: 1844k
[ 1.054863] udev: starting version 151
[ 1.169464] usb 1-2: configuration #1 chosen from 1 choice
[ 1.233798] ahci 0000:00:1f.2: version 3.0
[ 1.233835] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.233919] alloc irq_desc for 28 on node -1
[ 1.233927] alloc kstat_irqs on node -1
[ 1.233951] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.234097] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.234111] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.234124] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.269678] scsi2 : ahci
[ 1.300088] scsi3 : ahci
[ 1.338783] scsi4 : ahci
[ 1.369767] Linux agpgart interface v0.103
[ 1.370030] scsi5 : ahci
[ 1.370529] ata3: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444500 irq 28
[ 1.370539] ata4: DUMMY
[ 1.370548] ata5: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444600 irq 28
[ 1.370555] ata6: DUMMY
[ 1.402848] acpi device:00: registered as cooling_device2
[ 1.403230] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.403359] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.403836] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.403899] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.404053] r8169 0000:04:00.0: setting latency timer to 64
[ 1.404242] alloc irq_desc for 29 on node -1
[ 1.404249] alloc kstat_irqs on node -1
[ 1.404312] r8169 0000:04:00.0: irq 29 for MSI/MSI-X
[ 1.406358] eth0: RTL8102e at 0xf8102000, 00:26:22:33:cc:64, XID 04c00000 IRQ 29
[ 1.417142] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.417515] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.420396] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.688200] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.744267] ata3.00: ATA-8: TOSHIBA MK1655GSX, FG011M, max UDMA/100
[ 1.744292] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.749326] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.752257] ata3.00: configured for UDMA/100
[ 1.768522] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1655GS FG01 PQ: 0 ANSI: 5
[ 1.769078] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.769123] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.769368] sd 2:0:0:0: [sda] Write Protect is off
[ 1.769378] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.769494] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.770027] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.905502] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.978742] [drm] Initialized drm 1.1.0 20060810
[ 2.044290] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.044302] i915 0000:00:02.0: setting latency timer to 64
[ 2.055936] [drm] set up 7M of stolen space
[ 2.158905] [drm] initialized overlay support
[ 2.559424] fb0: inteldrmfb frame buffer device
[ 2.559432] registered panic notifier
[ 2.559450] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.564486] vga16fb: initializing
[ 2.564496] vga16fb: mapped to 0xc00a0000
[ 2.564506] vga16fb: not registering due to another framebuffer present
[ 2.892789] Console: switching to colour frame buffer device 128x37
[ 3.574699] xor: automatically using best checksumming function: pIII_sse
[ 3.593021] pIII_sse : 4844.000 MB/sec
[ 3.593027] xor: using function: pIII_sse (4844.000 MB/sec)
[ 3.603254] device-mapper: dm-raid45: initialized v0.2594b
[ 3.913230] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 36.416623] udev: starting version 151
[ 36.461605] Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 across:2096440k
[ 36.653646] lp: driver loaded but no devices found
[ 36.977434] intel_rng: FWH not detected
[ 37.311867] cfg80211: Calling CRDA to update world regulatory domain
[ 37.348694] cfg80211: World regulatory domain updated:
[ 37.348705] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 37.348715] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.348724] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 37.348733] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 37.348742] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.348751] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.382804] Linux video capture interface: v2.00
[ 37.480546] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b128)
[ 37.517912] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input6
[ 37.518085] usbcore: registered new interface driver uvcvideo
[ 37.518097] USB Video Class driver (v0.1.0)
[ 37.519661] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 37.519695] ath9k 0000:03:00.0: setting latency timer to 64
[ 37.571181] ath: EEPROM regdomain: 0x65
[ 37.571191] ath: EEPROM indicates we should expect a direct regpair map
[ 37.571202] ath: Country alpha2 being used: 00
[ 37.571208] ath: Regpair used: 0x65
[ 37.575447] type=1505 audit(1306960278.444:2): operation="profile_load" pid=670 name="/sbin/dhclient3"
[ 37.578238] type=1505 audit(1306960278.448:3): operation="profile_load" pid=670 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 37.578751] type=1505 audit(1306960278.448:4): operation="profile_load" pid=670 name="/usr/lib/connman/scripts/dhclient-script"
[ 37.622052] type=1505 audit(1306960278.492:5): operation="profile_replace" pid=686 name="/sbin/dhclient3"
[ 37.622919] type=1505 audit(1306960278.492:6): operation="profile_replace" pid=686 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 37.623433] type=1505 audit(1306960278.492:7): operation="profile_replace" pid=686 name="/usr/lib/connman/scripts/dhclient-script"
[ 37.851667] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 37.854035] Registered led device: ath9k-phy0::radio
[ 37.854101] Registered led device: ath9k-phy0::assoc
[ 37.854166] Registered led device: ath9k-phy0::tx
[ 37.854229] Registered led device: ath9k-phy0::rx
[ 37.854284] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8660000, irq=17
[ 38.017630] alloc irq_desc for 22 on node -1
[ 38.017639] alloc kstat_irqs on node -1
[ 38.017659] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 38.017750] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 38.050477] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 38.130837] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 38.577285] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 38.608041] type=1505 audit(1306960279.479:8): operation="profile_replace" pid=875 name="/sbin/dhclient3"
[ 38.608991] type=1505 audit(1306960279.479:9): operation="profile_replace" pid=875 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 38.609701] type=1505 audit(1306960279.479:10): operation="profile_replace" pid=875 name="/usr/lib/connman/scripts/dhclient-script"
[ 38.645033] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 38.679782] type=1505 audit(1306960279.547:11): operation="profile_load" pid=886 name="/usr/lib/cups/backend/cups-pdf"
[ 38.790429] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.807744] r8169: eth0: link down
[ 38.810567] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.218291] ppdev: user-space parallel port driver
[ 39.937516] CPU0 attaching NULL sched-domain.
[ 39.937529] CPU1 attaching NULL sched-domain.
[ 39.960295] CPU0 attaching sched-domain:
[ 39.960304] domain 0: span 0-1 level SIBLING
[ 39.960311] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 39.960324] domain 1: span 0-1 level MC
[ 39.960329] groups: 0-1 (cpu_power = 1178)
[ 39.960341] CPU1 attaching sched-domain:
[ 39.960346] domain 0: span 0-1 level SIBLING
[ 39.960351] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 39.960363] domain 1: span 0-1 level MC
[ 39.960368] groups: 0-1 (cpu_power = 1178)
[ 42.638204] CPU0 attaching NULL sched-domain.
[ 42.638222] CPU1 attaching NULL sched-domain.
[ 42.664449] CPU0 attaching sched-domain:
[ 42.664462] domain 0: span 0-1 level SIBLING
[ 42.664471] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 42.664492] domain 1: span 0-1 level MC
[ 42.664500] groups: 0-1 (cpu_power = 1178)
[ 42.664518] CPU1 attaching sched-domain:
[ 42.664526] domain 0: span 0-1 level SIBLING
[ 42.664534] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 42.664552] domain 1: span 0-1 level MC
[ 42.664559] groups: 0-1 (cpu_power = 1178)
orpheas@orpheas-laptop:~$

http://pastebin.ubuntu-gr.org/d3ac11b0a

[vagrale13]

1) Αυτο το προβλημα απο ποτε υπαρχει? Μετα την εγκατασταση, μετα απο καποιο update, κατι αλλο?
2) Αν δοκιμασει να μπει με παλιοτερη εκδοση πυρηνα, εχει το ιδιο προβλημα?
3) Αν δημιουργησει ενα νεο χρηστη, εχει και εκει το ιδιο προβλημα?
4) Μπορει να δοκιμασει με νεοτερη εκδοση πυρηνα http://kernel.ubuntu.com/~kernel-ppa/ma ... 9-oneiric/
5) Να δοκιμασει να περασει νεοτερη εκδοση του ath9k οπου λογικα θα εχει διορθωθει το προβλημα http://linuxwireless.org/en/users/Drivers/ath9k
6) Για το 5 και το 6 μπορει να δοκιμασει με το Oneiric (livecd) και να δει αν εχει διορθωθει το προβλημα εκει http://cdimage.ubuntu.com/daily-live/current/

[Epirotes]

1. Μετά την καθαρή εγκατάσταση. Δεν καταφέραμε ποτέ να στήσουμε το ασύρματο δίκτυο.
2. Δεν θυμάμαι αν το δοκιμάσαμε ή όχι. Δεν χάνει τίποτα να ξαναδοκιμάσει.
3. Να το δοκιμάσουμε κι αυτό.
4. βλ. 3
5. Αυτό είναι και το πιο πιθανό.
6. Θα τα δοκιμάσουμε όλα κι αν δεν τα καταφέρουμε θα γυρίσει πίσω 8.04 Netbook Remix.

[Epirotes]

Τελευταία ενημέρωση: δεν καταφέραμε να δοκιμάσουμε τίποτα τελικά διότι το μηχάνημα απεβίωσε! Και τώρα δεν ξέρω να το σημειώσω ως επιλυμένο ή να το αφήσω όπως είναι;
Υ.Γ. Το πρόβλημα λύθηκε τρόπον τινά διότι το εν λόγω νετμπουκ απεβίωσε!