Πρόβλημα με υπέρυθρες (irda) στο 8.10

[bat12]

Καταρχήν αν το θέμα δεν ειναι στο σωστό μέρος παρακαλώ μετακινήστε το.

Στο 8.04 για ενεργοποιήσω τις υπερυθρες είχα ακόλουθήσει αυτο http://ubuntuforums.org/showthread.php?t=963796&highlight=irda και δουλεψαν. Αναβαθμιζοντας σε 8.10 είδα ότι παλι κινητο - Η/Υ δεν επικοινωνούσαν μέσω IR.Δοκίμασα τους οδηγούς https://help.ubuntu.com/community/IrdaHowto και http://ubuntuforums.org/showthread.php?t=963796&highlight=irda αλλά αυτή την φορά δεν δούλεψαν. Ειδικότερα συμβαίνει το εξής:

Κώδικας: Επιλογή όλων

sudo irdadump
15:37:59.379961 xid:cmd 5f35ea7d > ffffffff S=6 s=0 (14)
15:37:59.467897 xid:cmd 5f35ea7d > ffffffff S=6 s=1 (14)
15:37:59.555891 xid:cmd 5f35ea7d > ffffffff S=6 s=2 (14)
15:37:59.643895 xid:cmd 5f35ea7d > ffffffff S=6 s=3 (14)
15:37:59.731889 xid:cmd 5f35ea7d > ffffffff S=6 s=4 (14)
15:37:59.819889 xid:cmd 5f35ea7d > ffffffff S=6 s=5 (14)
15:37:59.907890 xid:cmd 5f35ea7d > ffffffff S=6 s=* wolf-laptop hint=0400 [ Computer ] (27)

όμως όταν πλησιάσω το κινητο κοντά δεν βλέπει κάτι. Ομοίως και σε:

Κώδικας: Επιλογή όλων

cat /proc/net/irda/discovery
IrLMP: Discovery log:

Υπάρχει κάποια ιδέα? Ευχαριστώ._

[bat12]

Και εδώ το dmesg:

Κώδικας: Επιλογή όλων

[ 0.004297] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004302] CPU: L2 cache: 512K
[ 0.004305] CPU: Physical Processor ID: 0
[ 0.004318] Checking 'hlt' instruction... OK.
[ 0.020536] SMP alternatives: switching to UP code
[ 0.028026] Freeing SMP alternatives: 11k freed
[ 0.028032] ACPI: Core revision 20080609
[ 0.030489] ACPI: Checking initramfs for custom DSDT
[ 0.368532] ACPI: setting ELCR to 0800 (from 0a20)
[ 0.369913] weird, boot CPU (#0) not listedby the BIOS.
[ 0.369916] SMP motherboard not detected.
[ 0.369920] Local APIC not detected. Using dummy APIC emulation.
[ 0.369922] SMP disabled
[ 0.370000] Brought up 1 CPUs
[ 0.370003] Total of 1 processors activated (5600.18 BogoMIPS).
[ 0.370016] CPU0 attaching NULL sched-domain.
[ 0.370292] net_namespace: 840 bytes
[ 0.370304] Booting paravirtualized kernel on bare hardware
[ 0.370541] Time: 16:14:38 Date: 01/05/09
[ 0.370581] NET: Registered protocol family 16
[ 0.370987] EISA bus registered
[ 0.371014] ACPI: bus type pci registered
[ 0.372538] PCI: PCI BIOS revision 2.10 entry at 0xfd9d8, last bus=1
[ 0.372542] PCI: Using configuration type 1 for base access
[ 0.374284] ACPI: EC: Look up EC in DSDT
[ 0.378907] ACPI: Interpreter enabled
[ 0.378915] ACPI: (supports S0 S3 S4 S5)
[ 0.378929] ACPI: Using PIC for interrupt routing
[ 0.385966] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.388158] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.388162] ACPI: EC: driver started in interrupt mode
[ 0.388227] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.388320] PCI: 0000:00:00.0 reg 10 32bit mmio: [e8000000, ebffffff]
[ 0.388448] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.388489] PCI: 0000:00:02.1 reg 20 io port: [8100, 811f]
[ 0.388535] PCI: 0000:00:02.3 reg 10 32bit mmio: [ec000000, ec000fff]
[ 0.388568] PCI: 0000:00:02.3 reg 30 32bit mmio: [0, 1ffff]
[ 0.388583] pci 0000:00:02.3: supports D1
[ 0.388585] pci 0000:00:02.3: supports D2
[ 0.388588] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.388593] pci 0000:00:02.3: PME# disabled
[ 0.388612] PCI: 0000:00:02.5 reg 10 io port: [1f0, 1f7]
[ 0.388618] PCI: 0000:00:02.5 reg 14 io port: [3f4, 3f7]
[ 0.388625] PCI: 0000:00:02.5 reg 18 io port: [170, 177]
[ 0.388632] PCI: 0000:00:02.5 reg 1c io port: [374, 377]
[ 0.388639] PCI: 0000:00:02.5 reg 20 io port: [1000, 100f]
[ 0.388684] PCI: 0000:00:02.6 reg 10 io port: [1400, 14ff]
[ 0.388691] PCI: 0000:00:02.6 reg 14 io port: [1080, 10ff]
[ 0.388730] pci 0000:00:02.6: supports D1
[ 0.388731] pci 0000:00:02.6: supports D2
[ 0.388734] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.388738] pci 0000:00:02.6: PME# disabled
[ 0.388770] PCI: 0000:00:02.7 reg 10 io port: [1c00, 1cff]
[ 0.388777] PCI: 0000:00:02.7 reg 14 io port: [1800, 187f]
[ 0.388816] pci 0000:00:02.7: supports D1
[ 0.388818] pci 0000:00:02.7: supports D2
[ 0.388820] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.388824] pci 0000:00:02.7: PME# disabled
[ 0.388842] PCI: 0000:00:03.0 reg 10 32bit mmio: [ec001000, ec001fff]
[ 0.388892] PCI: 0000:00:03.1 reg 10 32bit mmio: [ec002000, ec002fff]
[ 0.388942] PCI: 0000:00:03.2 reg 10 32bit mmio: [ec003000, ec003fff]
[ 0.389003] PCI: 0000:00:03.3 reg 10 32bit mmio: [ec004000, ec004fff]
[ 0.389045] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.389049] pci 0000:00:03.3: PME# disabled
[ 0.389091] PCI: 0000:00:0a.0 reg 10 io port: [2000, 20ff]
[ 0.389099] PCI: 0000:00:0a.0 reg 14 32bit mmio: [ec005000, ec0050ff]
[ 0.389137] pci 0000:00:0a.0: supports D1
[ 0.389139] pci 0000:00:0a.0: supports D2
[ 0.389141] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
[ 0.389146] pci 0000:00:0a.0: PME# disabled
[ 0.389177] PCI: 0000:00:0c.0 reg 10 32bit mmio: [38020000, 38020fff]
[ 0.389192] pci 0000:00:0c.0: supports D1
[ 0.389194] pci 0000:00:0c.0: supports D2
[ 0.389196] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.389201] pci 0000:00:0c.0: PME# disabled
[ 0.389261] PCI: 0000:01:00.0 reg 10 32bit mmio: [f0000000, f7ffffff]
[ 0.389268] PCI: 0000:01:00.0 reg 14 io port: [9000, 90ff]
[ 0.389274] PCI: 0000:01:00.0 reg 18 32bit mmio: [ec100000, ec10ffff]
[ 0.389292] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.389308] pci 0000:01:00.0: supports D1
[ 0.389310] pci 0000:01:00.0: supports D2
[ 0.389345] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[ 0.389350] PCI: bridge 0000:00:01.0 32bit mmio: [ec100000, ec1fffff]
[ 0.389355] PCI: bridge 0000:00:01.0 32bit mmio pref: [f0000000, f7ffffff]
[ 0.389380] bus 00 -> node 0
[ 0.389390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.399038] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.399180] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[ 0.399315] ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *0, disabled.
[ 0.399450] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ 0.399616] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
[ 0.399753] ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
[ 0.399887] ACPI: PCI Interrupt Link [LNKG] (IRQs *9)
[ 0.400046] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled.
[ 0.400267] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.400318] pnp: PnP ACPI init
[ 0.400331] ACPI: bus type pnp registered
[ 0.407206] pnp: PnP ACPI: found 12 devices
[ 0.407206] ACPI: ACPI bus type pnp unregistered
[ 0.407206] PnPBIOS: Disabled by ACPI PNP
[ 0.408182] PCI: Using ACPI for IRQ routing
[ 0.408324] NET: Registered protocol family 8
[ 0.408324] NET: Registered protocol family 20
[ 0.408324] NetLabel: Initializing
[ 0.408324] NetLabel: domain hash size = 128
[ 0.408324] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.408324] NetLabel: unlabeled traffic allowed by default
[ 0.408427] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.408430] actual entries 65620
[ 0.408589] AppArmor: AppArmor Filesystem Enabled
[ 0.408622] system 00:04: ioport range 0x8000-0x808f has been reserved
[ 0.408622] system 00:04: ioport range 0x8090-0x80ff has been reserved
[ 0.408622] system 00:04: ioport range 0x8100-0x811f has been reserved
[ 0.408622] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.408622] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.408622] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.408622] system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.408622] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[ 0.408622] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
[ 0.408622] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.444299] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.444304] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.444310] pci 0000:00:01.0: MEM window: 0xec100000-0xec1fffff
[ 0.444316] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
[ 0.444324] pci 0000:00:0c.0: CardBus bridge, secondary bus 0000:02
[ 0.444326] pci 0000:00:0c.0: IO window: 0x002400-0x0024ff
[ 0.444331] pci 0000:00:0c.0: IO window: 0x002800-0x0028ff
[ 0.444336] pci 0000:00:0c.0: PREFETCH window: 0x30000000-0x33ffffff
[ 0.444341] pci 0000:00:0c.0: MEM window: 0x34000000-0x37ffffff
[ 0.444629] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 0.444633] PCI: setting IRQ 5 as level-triggered
[ 0.444638] pci 0000:00:0c.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 0.444644] bus: 00 index 0 io port: [0, ffff]
[ 0.444647] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.444649] bus: 01 index 0 io port: [9000, 9fff]
[ 0.444652] bus: 01 index 1 mmio: [ec100000, ec1fffff]
[ 0.444654] bus: 01 index 2 mmio: [f0000000, f7ffffff]
[ 0.444656] bus: 01 index 3 mmio: [0, 0]
[ 0.444659] bus: 02 index 0 io port: [2400, 24ff]
[ 0.444661] bus: 02 index 1 io port: [2800, 28ff]
[ 0.444664] bus: 02 index 2 mmio: [30000000, 33ffffff]
[ 0.444666] bus: 02 index 3 mmio: [34000000, 37ffffff]
[ 0.444682] NET: Registered protocol family 2
[ 0.444862] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.445140] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.445225] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.445305] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.445308] TCP reno registered
[ 0.445412] NET: Registered protocol family 1
[ 0.445567] checking if image is initramfs... it is
[ 0.948081] Switched to high resolution mode on CPU 0
[ 1.151484] Freeing initrd memory: 7950k freed
[ 1.152292] audit: initializing netlink socket (disabled)
[ 1.152316] type=2000 audit(1231172079.152:1): initialized
[ 1.156954] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.159601] VFS: Disk quotas dquot_6.5.1
[ 1.159725] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.159858] msgmni has been set to 999
[ 1.160052] io scheduler noop registered
[ 1.160056] io scheduler anticipatory registered
[ 1.160059] io scheduler deadline registered
[ 1.160077] io scheduler cfq registered (default)
[ 1.592037] pci 0000:01:00.0: Boot video device
[ 1.592485] isapnp: Scanning for PnP cards...
[ 1.945969] isapnp: No Plug & Play device found
[ 2.006135] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.006274] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.006471] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[ 2.007454] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.007731] serial 0000:00:02.6: enabling device (0000 -> 0001)
[ 2.007741] serial 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 2.007748] serial 0000:00:02.6: PCI INT C disabled
[ 2.009954] brd: module loaded
[ 2.010044] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.010205] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.012445] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.013815] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.013821] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.013825] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.013827] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.013830] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.014501] mice: PS/2 mouse device common for all mice
[ 2.014700] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.014722] rtc0: alarms up to one year, y3k
[ 2.014889] EISA: Probing bus 0 at eisa.0
[ 2.014898] Cannot allocate resource for EISA slot 1
[ 2.014900] Cannot allocate resource for EISA slot 2
[ 2.014920] Cannot allocate resource for EISA slot 8
[ 2.014922] EISA: Detected 0 cards.
[ 2.014926] cpuidle: using governor ladder
[ 2.014929] cpuidle: using governor menu
[ 2.015550] TCP cubic registered
[ 2.015590] Using IPI No-Shortcut mode
[ 2.015943] registered taskstats version 1
[ 2.016099] Magic number: 9:208:236
[ 2.016143] tty ttyv6: hash matches
[ 2.016271] rtc_cmos 00:02: setting system clock to 2009-01-05 16:14:40 UTC (1231172080)
[ 2.016275] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.016277] EDD information not available.
[ 2.016584] Freeing unused kernel memory: 424k freed
[ 2.016643] Write protecting the kernel text: 2580k
[ 2.016677] Write protecting the kernel read-only data: 940k
[ 2.042193] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.272061] fuse init (API version 7.9)
[ 2.540083] processor ACPI0007:00: registered as cooling_device0
[ 2.540090] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.548197] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.551206] ACPI: Thermal Zone [THM0] (58 C)
[ 3.261821] No dock devices found.
[ 3.319916] SCSI subsystem initialized
[ 3.320358] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 3.320363] PCI: setting IRQ 9 as level-triggered
[ 3.320368] ohci1394 0000:00:02.3: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 3.372123] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[ec000000-ec0007ff] Max Packet=[2048] IR/IT contexts=[4/6]
[ 3.430738] usbcore: registered new interface driver usbfs
[ 3.430779] usbcore: registered new interface driver hub
[ 3.444117] usbcore: registered new device driver usb
[ 3.520115] libata version 3.00 loaded.
[ 3.552205] ehci_hcd 0000:00:03.3: enabling device (0000 -> 0002)
[ 3.552475] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[ 3.552481] ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9
[ 3.552502] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 3.552581] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 3.552619] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
[ 3.552629] ehci_hcd 0000:00:03.3: irq 9, io mem 0xec004000
[ 3.553641] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.564067] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.564310] usb usb1: configuration #1 chosen from 1 choice
[ 3.564346] hub 1-0:1.0: USB hub found
[ 3.564360] hub 1-0:1.0: 6 ports detected
[ 3.772361] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.772381] r8169 0000:00:0a.0: enabling device (0015 -> 0017)
[ 3.772651] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 3.772655] PCI: setting IRQ 11 as level-triggered
[ 3.772659] r8169 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 3.773004] eth0: RTL8110s at 0xe082a000, 00:90:f5:28:75:70, XID 04000000 IRQ 11
[ 3.776970] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 3.776976] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 3.776992] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 3.777043] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 3.777068] ohci_hcd 0000:00:03.0: irq 11, io mem 0xec001000
[ 3.834339] usb usb2: configuration #1 chosen from 1 choice
[ 3.834378] hub 2-0:1.0: USB hub found
[ 3.834392] hub 2-0:1.0: 2 ports detected
[ 3.936702] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
[ 3.936709] ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 9 (level, low) -> IRQ 9
[ 3.936727] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 3.936765] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 3.936788] ohci_hcd 0000:00:03.1: irq 9, io mem 0xec002000
[ 3.994259] usb usb3: configuration #1 chosen from 1 choice
[ 3.994298] hub 3-0:1.0: USB hub found
[ 3.994314] hub 3-0:1.0: 2 ports detected
[ 4.096456] ohci_hcd 0000:00:03.2: enabling device (0010 -> 0012)
[ 4.096725] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
[ 4.096731] ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 9 (level, low) -> IRQ 9
[ 4.096752] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 4.096790] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 4.096812] ohci_hcd 0000:00:03.2: irq 9, io mem 0xec003000
[ 4.154263] usb usb4: configuration #1 chosen from 1 choice
[ 4.154303] hub 4-0:1.0: USB hub found
[ 4.154318] hub 4-0:1.0: 2 ports detected
[ 4.304048] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 4.363577] pata_sis 0000:00:02.5: version 0.5.2
[ 4.363890] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 4.363895] pata_sis 0000:00:02.5: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 4.365328] scsi0 : pata_sis
[ 4.366402] scsi1 : pata_sis
[ 4.367233] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
[ 4.367237] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
[ 4.517263] usb 2-2: configuration #1 chosen from 1 choice
[ 4.528413] ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD4A, max UDMA/100
[ 4.528418] ata1.00: 78140160 sectors, multi 16: LBA48
[ 4.544410] ata1.00: configured for UDMA/100
[ 4.696039] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 4.724297] ata2.00: ATAPI: DV-W22E, R.0A, max UDMA/33
[ 4.780294] ata2.00: configured for UDMA/33
[ 4.780433] scsi 0:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5
[ 4.825035] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f50000707528]
[ 4.828050] scsi 1:0:0:0: CD-ROM TEAC DV-W22E R.0A PQ: 0 ANSI: 5
[ 4.846618] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.846670] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.882504] Driver 'sd' needs updating - please use bus_type methods
[ 4.882657] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 4.882680] sd 0:0:0:0: [sda] Write Protect is off
[ 4.882683] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.882719] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.882814] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 4.882834] sd 0:0:0:0: [sda] Write Protect is off
[ 4.882837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.882871] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.882876] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.900949] usb 4-1: not running at top speed; connect to a high speed hub
[ 4.912468] sda1 sda2 <<6>usb 4-1: configuration #1 chosen from 1 choice
[ 4.939557] usbcore: registered new interface driver libusual
[ 4.945553] sda5 >
[ 4.945778] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.952366] Initializing USB Mass Storage driver...
[ 4.964935] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.969538] usbcore: registered new interface driver usb-storage
[ 4.969544] USB Mass Storage support registered.
[ 4.969677] usb-storage: device found at 2
[ 4.969680] usb-storage: waiting for device to settle before scanning
[ 5.262157] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 5.262164] Uniform CD-ROM driver Revision: 3.20
[ 5.262302] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.020645] PM: Starting manual resume from disk
[ 6.020651] PM: Resume from partition 8:5
[ 6.020653] PM: Checking hibernation image.
[ 6.020836] PM: Resume from disk failed.
[ 6.082553] kjournald starting. Commit interval 5 seconds
[ 6.082574] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.969177] usb-storage: device scan complete
[ 9.976148] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 1125 PQ: 0 ANSI: 0
[ 9.983141] scsi 2:0:0:1: Direct-Access Generic STORAGE DEVICE 1125 PQ: 0 ANSI: 0
[ 9.990138] scsi 2:0:0:2: Direct-Access Generic STORAGE DEVICE 1125 PQ: 0 ANSI: 0
[ 9.997137] scsi 2:0:0:3: Direct-Access Generic STORAGE DEVICE 1125 PQ: 0 ANSI: 0
[ 10.008228] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 10.008405] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 10.019224] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 10.019366] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 10.030204] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 10.030316] sd 2:0:0:2: Attached scsi generic sg4 type 0
[ 10.041196] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 10.041287] sd 2:0:0:3: Attached scsi generic sg5 type 0
[ 17.688367] udevd version 124 started
[ 19.008211] Linux agpgart interface v0.103
[ 19.240213] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.288284] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.388227] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
[ 19.397945] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 19.478015] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 19.488064] ACPI: Power Button (FF) [PWRF]
[ 19.488253] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 19.504059] ACPI: Power Button (CM) [PWRB]
[ 19.504223] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 19.520040] ACPI: Sleep Button (CM) [SLPB]
[ 19.520194] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 19.520533] ACPI: Lid Switch [LID]
[ 19.536066] ACPI: AC Adapter [ADP0] (on-line)
[ 19.544751] ACPI: Battery Slot [BAT0] (battery present)
[ 19.577899] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 19.657835] Yenta: CardBus bridge found at 0000:00:0c.0 [1558:0480]
[ 19.657857] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 19.657860] Yenta: Routing CardBus interrupts to PCI
[ 19.657865] Yenta TI: socket 0000:00:0c.0, mfunc 0x01001002, devctl 0x44
[ 19.888590] Yenta: ISA IRQ mask 0x0490, PCI irq 5
[ 19.888595] Socket status: 30000006
[ 19.987388] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[ 20.737610] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input7
[ 20.851406] Intel ICH 0000:00:02.7: enabling device (0000 -> 0001)
[ 20.851418] Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 21.065731] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8
[ 21.116159] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
[ 21.289776] parport_pc 00:0b: reported by Plug and Play ACPI
[ 21.289828] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 21.436796] irda_init()
[ 21.436816] NET: Registered protocol family 23
[ 21.556345] Linux video capture interface: v2.00
[ 21.570248] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 0.
[ 21.570285] nsc-ircc, chip->init
[ 21.570295] nsc-ircc, Found chip at base=0x02e
[ 21.570321] nsc-ircc, driver loaded (Dag Brattli)
[ 21.570329] nsc_ircc_open(), can't get iobase of 0x2f8
[ 21.570359] nsc-ircc, Found chip at base=0x02e
[ 21.570385] nsc-ircc, driver loaded (Dag Brattli)
[ 21.570388] nsc_ircc_open(), can't get iobase of 0x2f8
[ 21.570574] nsc-ircc 00:09: disabled
[ 21.624530] gspca: main v2.2.0 registered
[ 21.640994] gspca: probing 0ac8:301b
[ 21.676067] intel8x0_measure_ac97_clock: measured 55472 usecs
[ 21.676072] intel8x0: clocking to 48000
[ 23.536258] zc3xx: probe 2wr ov vga 0x0000
[ 23.704897] zc3xx: probe 3wr vga 1 0xc000
[ 24.011887] zc3xx: probe 3wr vga 2 0x0000
[ 24.079839] zc3xx: Sensor UNKNOW_0 force Tas5130
[ 24.095081] gspca: probe ok
[ 24.095113] usbcore: registered new interface driver zc3xx
[ 24.095134] zc3xx: registered
[ 24.278028] cs: IO port probe 0x100-0x3af: clean.
[ 24.279691] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[ 24.280404] cs: IO port probe 0x820-0x8ff: clean.
[ 24.281008] cs: IO port probe 0xc00-0xcf7: clean.
[ 24.281799] cs: IO port probe 0xa00-0xaff: clean.
[ 24.624463] lp0: using parport0 (interrupt-driven).
[ 24.698651] IrCOMM protocol (Dag Brattli)
[ 24.726914] nsc-ircc 00:09: activated
[ 24.726921] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 0.
[ 24.726957] nsc-ircc, chip->init
[ 24.726968] nsc-ircc, Found chip at base=0x02e
[ 24.727189] nsc-ircc 00:09: disabled
[ 25.032435] Adding 1502036k swap on /dev/sda5. Priority:-1 extents:1 across:1502036k
[ 25.589982] EXT3 FS on sda1, internal journal
[ 26.738384] type=1505 audit(1231172105.264:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4095
[ 26.939837] type=1505 audit(1231172105.464:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4100
[ 26.940201] type=1505 audit(1231172105.468:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4100
[ 27.108836] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.258923] pnp 00:09: activated
[ 27.277233] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 0.
[ 27.277269] __ratelimit: 5 callbacks suppressed
[ 27.277271] nsc-ircc, chip->init
[ 27.277281] nsc-ircc, Found chip at base=0x02e
[ 27.277307] nsc-ircc, driver loaded (Dag Brattli)
[ 27.277317] nsc_ircc_open(), can't get iobase of 0x2f8
[ 27.277346] nsc-ircc, Found chip at base=0x02e
[ 27.277373] nsc-ircc, driver loaded (Dag Brattli)
[ 27.277376] nsc_ircc_open(), can't get iobase of 0x2f8
[ 27.277561] nsc-ircc 00:09: disabled
[ 27.289100] pnp 00:09: activated
[ 28.037134] ACPI: WMI: Mapper loaded
[ 29.782895] Intel ICH Modem 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 30.107666] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 30.280369] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 30.280377] apm: overridden by ACPI.
[ 30.624437] ppdev: user-space parallel port driver
[ 33.962705] serial8250: too much work for irq3
[ 34.173023] Bluetooth: Core ver 2.13
[ 34.175261] NET: Registered protocol family 31
[ 34.175268] Bluetooth: HCI device and connection manager initialized
[ 34.175274] Bluetooth: HCI socket layer initialized
[ 34.234679] Bluetooth: L2CAP ver 2.11
[ 34.234689] Bluetooth: L2CAP socket layer initialized
[ 34.256677] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.256684] Bluetooth: BNEP filters: protocol multicast
[ 34.312040] Bridge firewalling registered
[ 34.335491] Bluetooth: SCO (Voice Link) ver 0.6
[ 34.335498] Bluetooth: SCO socket layer initialized
[ 34.347834] Bluetooth: RFCOMM socket layer initialized
[ 34.348112] Bluetooth: RFCOMM TTY layer initialized
[ 34.348118] Bluetooth: RFCOMM ver 1.10
[ 37.069327] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 37.435818] [drm] Initialized drm 1.1.0 20060810
[ 37.460957] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 37.703405] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
[ 37.703438] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 37.703443] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[ 37.716099] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 37.987714] [drm] Setting GART location based on new memory map
[ 37.987726] [drm] Loading R300 Microcode
[ 37.987766] [drm] Num pipes: 1
[ 37.987774] [drm] writeback test succeeded in 1 usecs
[ 38.584816] r8169: eth0: link down
[ 121.526616] r8169: eth0: link up
[ 121.681203] NET: Registered protocol family 17
[ 127.212434] NET: Registered protocol family 10
[ 127.214855] lo: Disabled Privacy Extensions
[ 137.512019] eth0: no IPv6 routers present
[ 168.716358] ppdev0: registered pardevice
[ 168.764466] ppdev0: unregistered pardevice
[ 170.293693] ppdev0: registered pardevice
[ 170.340187] ppdev0: unregistered pardevice
[ 171.793445] ppdev0: registered pardevice
[ 171.840071] ppdev0: unregistered pardevice
[ 344.078164] sirdev_get_instance - ttyS1
[ 344.080122] irtty_open - ttyS1: irda line discipline opened
[ 345.083940] irlap_change_speed(), setting speed to 9600
[ 1077.328559] r8169: eth0: link down
[ 1096.966030] r8169: eth0: link up


[linuxman]

Για ρίξε μία ματιά εδώ https://help.ubuntu.com/community/IrdaHowto

[bat12]

Για ρίξε μία ματιά εδώ https://help.ubuntu.com/community/IrdaHowto

Ναι, φίλε μου, το ακολούθησα από την πρώτη στιγμή (το γράφω και στην αρχή ) και το επανέλαβα κάμποσες φορές κανοντας απεγκατάσταση τα πακέτα και εκ νέου εγκατάσταση. Αυτό που παρατήρησα είναι ότι όταν ακόλουθήσω των οδηγό έχοντας εγκατεστημενο το setserial δεν έχει δραστηριότητα σε irdadump. Αν ακολουθήσω αυτό:http://ubuntuforums.org/showthread.php?t=963796&highlight=irda (χωρις setserial εγκατεστημένο αλλά με openobex apps) τότε έχει δραστηριότητα σε irdadump αλλά δεν βλεπει το κινητό (IrLMP: Discovery log ΚΕΝΟ).

[bat12]

Λοιπόν το πρόβλημα λύθηκε: Εκανα reinstall irda-utils, setserıal και openobex apps και ακολούθησα τον https://help.ubuntu.com/community/IrdaHowto. Στον φάκελο /etc/modprobe.d/irda-utils παρατήρησα ότι τα

Κώδικας: Επιλογή όλων

alias irda0 nsc-ircc
options nsc-ircc dongle_id=0x09

ήταν ανάποδα (η alias κάτω και η πάνω) και αυτό ήταν η μόνη διαφοροποίηση. Τα υπόλοιπα ήταν όπως τα είχα ρυθμίσει από τις προηγούμενες προσπαθειες συμφώνως του οδηγού.

[linuxman]

Οκ , τώρα μπορείς να βάλεις και το {ΕΠΙΛΥΘΗΚΕ] προφανώς ?