"Προβλημα" με Amilo Pro V3505 Wireless Card

[simosx]

Στο dmesg βλέπω μόνο μηνύματα από το τοίχος προστασίας UFW. Και είναι τόσο πολλά αυτά τα μηνύματα που έχουν κρύψει τα παλαιότερα μηνύματα που έχουν σχέση με το ασύρματο δίκτυο. Μπορείς να δοκιμάσεις ξανά με απενεργοποιημένο το UFW;

(αν έχεις τοπικό δίκτυο, τότε έχει μικρή αξία ένα τοίχος προστασίας. Διότι σε προστατεύει ο δρομολογητής σου μέσω του δικτύου NAT).

[zoro]

Έχεις δίκιο.

Spoiler: show

Κώδικας: Επιλογή όλων

0.361118] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[ 0.361189] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[ 0.361259] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[ 0.361330] ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
[ 0.361400] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[ 0.361470] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
[ 0.361540] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *5
[ 0.361742] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.361769] vgaarb: loaded
[ 0.361771] vgaarb: bridge control possible 0000:00:02.0
[ 0.361988] i2c-core: driver [aat2870] using legacy suspend method
[ 0.361991] i2c-core: driver [aat2870] using legacy resume method
[ 0.362134] SCSI subsystem initialized
[ 0.362234] libata version 3.00 loaded.
[ 0.362315] usbcore: registered new interface driver usbfs
[ 0.362339] usbcore: registered new interface driver hub
[ 0.362384] usbcore: registered new device driver usb
[ 0.362534] PCI: Using ACPI for IRQ routing
[ 0.374754] PCI: pci_cache_line_size set to 64 bytes
[ 0.374953] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.374958] reserve RAM buffer: 000000007f690000 - 000000007fffffff
[ 0.375174] NetLabel: Initializing
[ 0.375178] NetLabel: domain hash size = 128
[ 0.375180] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.375197] NetLabel: unlabeled traffic allowed by default
[ 0.375439] hpet clockevent registered
[ 0.375445] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.375454] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.375462] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.384129] Switching to clocksource hpet
[ 0.398751] AppArmor: AppArmor Filesystem Enabled
[ 0.398800] pnp: PnP ACPI init
[ 0.398830] ACPI: bus type pnp registered
[ 0.399338] pnp 00:00: [bus 00-ff]
[ 0.399344] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.399348] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.399351] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.399355] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.399359] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.399363] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.399367] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.399371] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.399375] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.399379] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.399382] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.399386] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.399390] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.399394] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.399398] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.399402] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.399405] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.399409] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.399519] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.399563] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.399567] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.399570] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.399574] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.399577] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.399581] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.399585] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.399588] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.399689] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.399694] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.399698] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.399703] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.399708] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.399712] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.399717] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.399722] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.399727] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432127] pnp 00:02: [io 0x0000-0x001f]
[ 0.432132] pnp 00:02: [io 0x0081-0x0091]
[ 0.432136] pnp 00:02: [io 0x0093-0x009f]
[ 0.432139] pnp 00:02: [io 0x00c0-0x00df]
[ 0.432143] pnp 00:02: [dma 4]
[ 0.432256] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.432281] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.432355] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.432418] pnp 00:04: [io 0x00f0]
[ 0.432436] pnp 00:04: [irq 13]
[ 0.432509] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.432528] pnp 00:05: [io 0x002e-0x002f]
[ 0.432531] pnp 00:05: [io 0x0061]
[ 0.432535] pnp 00:05: [io 0x0063]
[ 0.432538] pnp 00:05: [io 0x0065]
[ 0.432541] pnp 00:05: [io 0x0067]
[ 0.432544] pnp 00:05: [io 0x0070]
[ 0.432547] pnp 00:05: [io 0x0080]
[ 0.432550] pnp 00:05: [io 0x0092]
[ 0.432553] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.432557] pnp 00:05: [io 0x0800-0x080f]
[ 0.432560] pnp 00:05: [io 0x1000-0x107f]
[ 0.432564] pnp 00:05: [io 0x1180-0x11bf]
[ 0.432567] pnp 00:05: [io 0x1640-0x164f]
[ 0.432570] pnp 00:05: [io 0x1200-0x120f]
[ 0.432711] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.432716] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.432721] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.432725] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.432730] system 00:05: [io 0x1200-0x120f] has been reserved
[ 0.432735] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432780] pnp 00:06: [io 0x06a0-0x06af]
[ 0.432784] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.432892] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.432896] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.432902] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432917] pnp 00:07: [io 0x0070-0x0077]
[ 0.432926] pnp 00:07: [irq 8]
[ 0.433000] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.433180] pnp 00:08: [io 0x0060]
[ 0.433184] pnp 00:08: [io 0x0064]
[ 0.433193] pnp 00:08: [irq 1]
[ 0.433276] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.433297] pnp 00:09: [irq 12]
[ 0.433375] pnp 00:09: Plug and Play ACPI device, IDs SYN0301 SYN0300 SYN0002 PNP0f13 (active)
[ 0.433414] pnp: PnP ACPI: found 10 devices
[ 0.433417] ACPI: ACPI bus type pnp unregistered
[ 0.433422] PnPBIOS: Disabled by ACPI PNP
[ 0.471254] PCI: max bus depth: 2 pci_try_num: 3
[ 0.471326] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.471334] pci 0000:00:1e.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.471340] pci 0000:00:1c.1: BAR 15: assigned [mem 0x84000000-0x841fffff 64bit pref]
[ 0.471346] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.471352] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref]
[ 0.471357] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.471363] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.471372] pci 0000:00:1c.0: bridge window [mem 0xd2000000-0xd3ffffff]
[ 0.471379] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.471390] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.471395] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.471404] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd40fffff]
[ 0.471411] pci 0000:00:1c.1: bridge window [mem 0x84000000-0x841fffff 64bit pref]
[ 0.471424] pci 0000:0a:06.4: BAR 0: assigned [mem 0xd4101100-0xd41011ff]
[ 0.471433] pci 0000:0a:06.4: BAR 0: set to [mem 0xd4101100-0xd41011ff] (PCI address [0xd4101100-0xd41011ff])
[ 0.471440] pci 0000:0a:06.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.471445] pci 0000:0a:06.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.471449] pci 0000:0a:06.0: BAR 14: assigned [io 0x3000-0x30ff]
[ 0.471453] pci 0000:0a:06.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.471457] pci 0000:0a:06.0: CardBus bridge to [bus 0b-0e]
[ 0.471461] pci 0000:0a:06.0: bridge window [io 0x3400-0x34ff]
[ 0.471469] pci 0000:0a:06.0: bridge window [io 0x3000-0x30ff]
[ 0.471477] pci 0000:0a:06.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.471485] pci 0000:0a:06.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.471492] pci 0000:00:1e.0: PCI bridge to [bus 0a-0b]
[ 0.471497] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.471506] pci 0000:00:1e.0: bridge window [mem 0xd4100000-0xd41fffff]
[ 0.471513] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.471554] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.471562] pci 0000:00:1c.0: setting latency timer to 64
[ 0.471581] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.471589] pci 0000:00:1c.1: setting latency timer to 64
[ 0.471601] pci 0000:00:1e.0: setting latency timer to 64
[ 0.471617] pci 0000:0a:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.471626] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.471630] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.471634] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.471638] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd3ffffff]
[ 0.471643] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.471647] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.471651] pci_bus 0000:04: resource 1 [mem 0xd4000000-0xd40fffff]
[ 0.471655] pci_bus 0000:04: resource 2 [mem 0x84000000-0x841fffff 64bit pref]
[ 0.471659] pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
[ 0.471663] pci_bus 0000:0a: resource 1 [mem 0xd4100000-0xd41fffff]
[ 0.471667] pci_bus 0000:0a: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.471671] pci_bus 0000:0a: resource 4 [io 0x0000-0xffff]
[ 0.471675] pci_bus 0000:0a: resource 5 [mem 0x00000000-0xffffffff]
[ 0.471679] pci_bus 0000:0b: resource 0 [io 0x3400-0x34ff]
[ 0.471683] pci_bus 0000:0b: resource 1 [io 0x3000-0x30ff]
[ 0.471687] pci_bus 0000:0b: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.471691] pci_bus 0000:0b: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.471766] NET: Registered protocol family 2
[ 0.471888] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.472301] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.473124] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.473533] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.473537] TCP reno registered
[ 0.473542] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.473561] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.473705] NET: Registered protocol family 1
[ 0.473734] pci 0000:00:02.0: Boot video device
[ 0.473786] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.473811] pci 0000:00:1d.0: PCI INT A disabled
[ 0.473823] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.473845] pci 0000:00:1d.1: PCI INT B disabled
[ 0.473862] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.473885] pci 0000:00:1d.2: PCI INT C disabled
[ 0.473901] pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.473923] pci 0000:00:1d.3: PCI INT D disabled
[ 0.473937] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.473973] pci 0000:00:1d.7: PCI INT A disabled
[ 0.474045] PCI: CLS 64 bytes, default 64
[ 0.474055] Simple Boot Flag at 0x36 set to 0x1
[ 0.474631] audit: initializing netlink socket (disabled)
[ 0.474649] type=2000 audit(1351290808.468:1): initialized
[ 0.507059] highmem bounce pool size: 64 pages
[ 0.507068] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.510637] VFS: Disk quotas dquot_6.5.2
[ 0.510748] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.511686] fuse init (API version 7.17)
[ 0.511847] msgmni has been set to 1685
[ 0.512377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.512426] io scheduler noop registered
[ 0.512429] io scheduler deadline registered
[ 0.512440] io scheduler cfq registered (default)
[ 0.512653] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.512729] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.512837] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.512904] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.513056] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.513105] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.513245] intel_idle: MWAIT substates: 0x22220
[ 0.513248] intel_idle: does not run on family 6 model 14
[ 0.528090] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.544111] ACPI: AC Adapter [ADP1] (on-line)
[ 0.544253] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.560083] ACPI: Lid Switch [LID0]
[ 0.560199] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.560208] ACPI: Sleep Button [SLPB]
[ 0.560311] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.560316] ACPI: Power Button [PWRF]
[ 0.576221] Marking TSC unstable due to TSC halts in idle
[ 0.576242] ACPI: acpi_idle registered with cpuidle
[ 0.635643] Freeing initrd memory: 14020k freed
[ 0.776090] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.776095] ACPI: Thermal Zone [TZS0] (45 C)
[ 0.844081] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.844085] ACPI: Thermal Zone [TZS1] (51 C)
[ 0.844140] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.844154] ACPI: Battery Slot [BAT0] (battery present)
[ 0.844205] ERST: Table is not found!
[ 0.844208] GHES: HEST is not enabled!
[ 0.844326] isapnp: Scanning for PnP cards...
[ 0.844435] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.198366] isapnp: No Plug & Play device found
[ 1.384583] Linux agpgart interface v0.103
[ 1.384740] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 1.384822] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.385661] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.385854] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.388598] brd: module loaded
[ 1.390018] loop: module loaded
[ 1.390255] ahci 0000:00:1f.2: version 3.0
[ 1.390274] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.390347] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.390438] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.390444] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.390451] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.391259] scsi0 : ahci
[ 1.391417] scsi1 : ahci
[ 1.391552] scsi2 : ahci
[ 1.391689] scsi3 : ahci
[ 1.391907] ata1: SATA max UDMA/133 abar m1024@0xd4544400 port 0xd4544500 irq 42
[ 1.391911] ata2: DUMMY
[ 1.391915] ata3: SATA max UDMA/133 abar m1024@0xd4544400 port 0xd4544600 irq 42
[ 1.391919] ata4: DUMMY
[ 1.392048] ata_piix 0000:00:1f.1: version 2.13
[ 1.392062] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.392111] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.392644] scsi4 : ata_piix
[ 1.392765] scsi5 : ata_piix
[ 1.393312] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.393317] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.393961] Fixed MDIO Bus: probed
[ 1.394000] tun: Universal TUN/TAP device driver, 1.6
[ 1.394004] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.394097] PPP generic driver version 2.4.2
[ 1.394183] ata6: port disabled--ignoring
[ 1.394283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.394310] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.394329] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.394335] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.394412] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.394442] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.394458] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.398357] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.398381] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd4544000
[ 1.412028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.412258] hub 1-0:1.0: USB hub found
[ 1.412266] hub 1-0:1.0: 8 ports detected
[ 1.412410] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.412435] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.412464] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.412475] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.412480] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.412561] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.412594] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.412812] hub 2-0:1.0: USB hub found
[ 1.412819] hub 2-0:1.0: 2 ports detected
[ 1.412933] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.412943] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.412949] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.413025] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.413072] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.413302] hub 3-0:1.0: USB hub found
[ 1.413309] hub 3-0:1.0: 2 ports detected
[ 1.413423] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.413435] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.413440] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.413514] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.413563] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.413782] hub 4-0:1.0: USB hub found
[ 1.413788] hub 4-0:1.0: 2 ports detected
[ 1.413898] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.413909] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.413914] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.413996] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.414044] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 1.414267] hub 5-0:1.0: USB hub found
[ 1.414274] hub 5-0:1.0: 2 ports detected
[ 1.414470] usbcore: registered new interface driver libusual
[ 1.414548] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.414925] i8042: Detected active multiplexing controller, rev 1.1
[ 1.415024] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.415033] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.415085] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.415128] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.415178] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.415392] mousedev: PS/2 mouse device common for all mice
[ 1.415724] rtc_cmos 00:07: RTC can wake from S4
[ 1.415899] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.415937] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.416051] device-mapper: uevent: version 1.0.3
[ 1.416189] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.416246] EISA: Probing bus 0 at eisa.0
[ 1.416255] Cannot allocate resource for EISA slot 1
[ 1.416259] Cannot allocate resource for EISA slot 2
[ 1.416262] Cannot allocate resource for EISA slot 3
[ 1.416278] Cannot allocate resource for EISA slot 4
[ 1.416302] EISA: Detected 0 cards.
[ 1.416318] cpufreq-nforce2: No nForce2 chipset.
[ 1.416430] cpuidle: using governor ladder
[ 1.416603] cpuidle: using governor menu
[ 1.416606] EFI Variables Facility v0.08 2004-May-17
[ 1.417087] TCP cubic registered
[ 1.417291] NET: Registered protocol family 10
[ 1.418315] NET: Registered protocol family 17
[ 1.418419] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.418447] Registering the dns_resolver key type
[ 1.418530] Using IPI No-Shortcut mode
[ 1.418839] PM: Hibernation image not present or could not be loaded.
[ 1.418857] registered taskstats version 1
[ 1.429300] Magic number: 0:344:604
[ 1.429448] rtc_cmos 00:07: setting system clock to 2012-10-26 22:33:30 UTC (1351290810)
[ 1.429842] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.429845] EDD information not available.
[ 1.556511] ata5.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33
[ 1.572395] ata5.00: configured for UDMA/33
[ 1.704118] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.707546] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.707891] ata1.00: ATA-8: WDC WD3200BPVT-00HXZT1, 01.01A01, max UDMA/133
[ 1.707896] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.708102] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.711457] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.711900] ata1.00: configured for UDMA/133
[ 1.712160] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-0 01.0 PQ: 0 ANSI: 5
[ 1.712391] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.712398] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.712486] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.712516] sd 0:0:0:0: [sda] Write Protect is off
[ 1.712523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.712578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.716678] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5
[ 1.721827] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.721832] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.722040] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.722201] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.753585] sda: sda1 sda2 sda4
[ 1.754393] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.754547] Freeing unused kernel memory: 740k freed
[ 1.755032] Write protecting the kernel text: 5824k
[ 1.755072] Write protecting the kernel read-only data: 2376k
[ 1.755075] NX-protecting the kernel data: 4416k
[ 1.778064] udevd[97]: starting version 175
[ 1.810153] xor: automatically using best checksumming function: pIII_sse
[ 1.828017] pIII_sse : 4047.000 MB/sec
[ 1.828023] xor: using function: pIII_sse (4047.000 MB/sec)
[ 1.834629] device-mapper: dm-raid45: initialized v0.2594b
[ 1.916068] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 2.114929] input: OM as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
[ 2.115207] generic-usb 0003:04F3:0234.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:1d.2-2/input0
[ 2.115232] usbcore: registered new interface driver usbhid
[ 2.115235] usbhid: USB HID core driver
[ 2.145722] sky2: driver version 1.30
[ 2.145812] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.145865] sky2 0000:02:00.0: setting latency timer to 64
[ 2.146332] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[ 2.147577] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 2.152112] sky2 0000:02:00.0: eth0: addr 00:0a:e4:b8:f7:70
[ 2.169889] sdhci: Secure Digital Host Controller Interface driver
[ 2.169894] sdhci: Copyright(c) Pierre Ossman
[ 2.170314] sdhci-pci 0000:0a:06.2: SDHCI controller found [1524:0550] (rev 1)
[ 2.170350] sdhci-pci 0000:0a:06.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.170415] mmc0: no vmmc regulator found
[ 2.170459] Registered led device: mmc0::
[ 2.171510] mmc0: SDHCI controller on PCI [0000:0a:06.2] using PIO
[ 2.171527] sdhci-pci 0000:0a:06.4: SDHCI controller found [1524:0551] (rev 1)
[ 2.171541] sdhci-pci 0000:0a:06.4: enabling device (0004 -> 0006)
[ 2.171550] sdhci-pci 0000:0a:06.4: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.171574] mmc1: no vmmc regulator found
[ 2.171620] Registered led device: mmc1::
[ 2.179196] mmc1: SDHCI controller on PCI [0000:0a:06.4] using PIO
[ 2.309446] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.312373] ACPI: Battery Slot [BAT0] (battery present)
[ 17.493218] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.527154] udevd[365]: starting version 175
[ 17.566436] lp: driver loaded but no devices found
[ 17.637961] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 17.638135] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.700810] Adding 1178620k swap on /dev/sda4. Priority:-1 extents:1 across:1178620k
[ 17.803061] device-mapper: multipath: version 1.3.0 loaded
[ 17.877553] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 17.888496] [drm] Initialized drm 1.1.0 20060810
[ 17.893160] intel_rng: FWH not detected
[ 17.896271] cfg80211: Calling CRDA to update world regulatory domain
[ 17.909624] leds_ss4200: no LED devices found
[ 17.948800] type=1400 audit(1351280027.017:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=538 comm="apparmor_parser"
[ 17.949482] type=1400 audit(1351280027.017:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=538 comm="apparmor_parser"
[ 17.949872] type=1400 audit(1351280027.017:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser"
[ 17.973912] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.973920] i915 0000:00:02.0: setting latency timer to 64
[ 17.982403] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.982408] [drm] Driver supports precise vblank timestamp query.
[ 17.987468] yenta_cardbus 0000:0a:06.0: CardBus bridge found [1734:10c1]
[ 17.987496] yenta_cardbus 0000:0a:06.0: Enabling burst memory read transactions
[ 17.987504] yenta_cardbus 0000:0a:06.0: Using CSCINT to route CSC interrupts to PCI
[ 17.987508] yenta_cardbus 0000:0a:06.0: Routing CardBus interrupts to PCI
[ 17.987516] yenta_cardbus 0000:0a:06.0: TI: mfunc 0x00001202, devctl 0x44
[ 17.996141] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 17.996146] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 17.996231] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.996248] iwl3945 0000:04:00.0: setting latency timer to 64
[ 18.159612] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 18.159619] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 18.159784] iwl3945 0000:04:00.0: irq 44 for MSI/MSI-X
[ 18.170577] Registered led device: phy0-led
[ 18.170626] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.183857] Bluetooth: Core ver 2.16
[ 18.183889] NET: Registered protocol family 31
[ 18.183892] Bluetooth: HCI device and connection manager initialized
[ 18.183897] Bluetooth: HCI socket layer initialized
[ 18.183900] Bluetooth: L2CAP socket layer initialized
[ 18.183908] Bluetooth: SCO socket layer initialized
[ 18.201354] ppdev: user-space parallel port driver
[ 18.212133] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.212139] Bluetooth: BNEP filters: protocol multicast
[ 18.224949] yenta_cardbus 0000:0a:06.0: ISA IRQ mask 0x0cf8, PCI irq 22
[ 18.224956] yenta_cardbus 0000:0a:06.0: Socket status: 30000006
[ 18.224962] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 18.229459] yenta_cardbus 0000:0a:06.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 18.229466] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff
[ 18.233708] type=1400 audit(1351280027.301:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=697 comm="apparmor_parser"
[ 18.243453] 0x3400-0x34ff
[ 18.247126] type=1400 audit(1351280027.313:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=697 comm="apparmor_parser"
[ 18.249689] Bluetooth: RFCOMM TTY layer initialized
[ 18.249697] Bluetooth: RFCOMM socket layer initialized
[ 18.249700] Bluetooth: RFCOMM ver 1.11
[ 18.250774] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 18.292863]
[ 18.292873] yenta_cardbus 0000:0a:06.0: pcmcia: parent PCI bridge window: [mem 0xd4100000-0xd41fffff]
[ 18.292880] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4100000-0xd41fffff: excluding 0xd4100000-0xd410ffff
[ 18.292902] yenta_cardbus 0000:0a:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 18.292907] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[ 18.359648] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 18.578362] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0
[ 18.579635] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.579640] cfg80211: World regulatory domain updated:
[ 18.579643] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.579648] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.579653] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.579657] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.579661] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.579665] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.611361] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 18.639875] init: failsafe main process (783) killed by TERM signal
[ 18.668536] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 18.670649] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 18.671528] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 18.672412] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.673209] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 18.673264] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 18.673313] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 18.673367] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 18.826470] type=1400 audit(1351280027.893:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=891 comm="apparmor_parser"
[ 18.826827] type=1400 audit(1351280027.893:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=892 comm="apparmor_parser"
[ 18.834134] sky2 0000:02:00.0: eth0: enabling interface
[ 18.834913] type=1400 audit(1351280027.901:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=892 comm="apparmor_parser"
[ 18.835308] type=1400 audit(1351280027.901:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=892 comm="apparmor_parser"
[ 18.836539] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.839601] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.850827] type=1400 audit(1351280027.917:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=899 comm="apparmor_parser"
[ 18.851605] [drm] initialized overlay support
[ 18.996559] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[ 18.996741] iwl3945 0000:04:00.0: Radio disabled by HW RF Kill switch
[ 18.996908] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.065520] fbcon: inteldrmfb (fb0) is primary device
[ 19.066151] Console: switching to colour frame buffer device 160x50
[ 19.066202] fb0: inteldrmfb frame buffer device
[ 19.066205] drm: registered panic notifier
[ 19.066271] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 19.066355] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 19.066440] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 19.066485] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 19.108391] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 19.197306] iwl3945 0000:04:00.0: Radio disabled by HW RF Kill switch
[ 19.197547] iwl3945 0000:04:00.0: Radio disabled by HW RF Kill switch
[ 19.209092] init: alsa-restore main process (953) terminated with status 19
[ 19.240794] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 19.246385] zram: Creating 2 devices ...
[ 19.296390] Adding 512988k swap on /dev/zram0. Priority:5 extents:1 across:512988k SS
[ 19.311185] Adding 512988k swap on /dev/zram1. Priority:5 extents:1 across:512988k SS
[ 30.089469] init: plymouth-stop pre-start process (2027) terminated with status 1

Το "Radio disabled by HW RF Kill switch" το εμφανίζει όταν ξετικαρω την επιλογή "Ενεργοποίηση ασύρματης δικτύωσης" επάνω δεξιά.

Off topic:
Εαν γνωριζεις θα σου ηταν ευκολο να μου πεις πως αφαιρώ αυτά απ'το zram ?

Κώδικας: Επιλογή όλων

[ 19.240794] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 19.246385] zram: Creating 2 devices ...
[ 19.296390] Adding 512988k swap on /dev/zram0. Priority:5 extents:1 across:512988k SS
[ 19.311185] Adding 512988k swap on /dev/zram1. Priority:5 extents:1 across:512988k SS

[simosx]

[ 19.197306] iwl3945 0000:04:00.0: Radio disabled by HW RF Kill switch
[ 19.197547] iwl3945 0000:04:00.0: Radio disabled by HW RF Kill switch

Εδώ είναι επιβεβαίωση για το HW RF Kill switch.
Θέλει αναζήτηση στο διαδίκτυο. Είδα το http://ubuntuforums.org/showthread.php?t=820297
οπότε δοκίμασε τις εντολές

Κώδικας: Επιλογή όλων


sudo rmmod -f iwl3945
sudo modprobe iwl3945 disable_hw_scan=1

Αν το dmesg αναφέρει ότι τώρα λειτουργεί η κάρτα, τότε κάνεις μόνιμη την παράμετρο disable_hw_scan=1.

Off topic:

[ 19.240794] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 19.246385] zram: Creating 2 devices ...
[ 19.296390] Adding 512988k swap on /dev/zram0. Priority:5 extents:1 across:512988k SS
[ 19.311185] Adding 512988k swap on /dev/zram1. Priority:5 extents:1 across:512988k SS

Το zram φαίνεται ενδιαφέρον θέμα που δεν το ήξερα. Νομίζω ότι αντί για offtopic έχει νόημα να ξεκινήσεις νέο νήμα.
Με apt-cache policy zram-config βλέπω ότι δεν εγκαθίσταται από προεπιλογή.
Και ότι στο http://www.webupd8.org/2011/10/increase ... -with.html έχει πληροφορίες για το zram.
Για να το απενεργοποιήσεις, αφαιρείς το σχετικό πακέτο ή αλλάζεις στο /etc/init/zramswap.conf

[zoro]

Θέλει αναζήτηση στο διαδίκτυο. Είδα το http://ubuntuforums.org/showthread.php?t=820297
οπότε δοκίμασε τις εντολές

Κώδικας: Επιλογή όλων

sudo rmmod -f iwl3945
sudo modprobe iwl3945 disable_hw_scan=1

Αυτά τα έχω δει πριν ακόμα ανοίξω αυτό το νήμα. Όπως επίσης και εδώ http://ubuntuforums.org/showthread.php?t=1604098
επίσης εδώ http://ubuntuforums.org/showthread.php?t=1881752 και σε ότι άλλο αφορούσε την κάρτα δικτύου που έχω.
Αλλά όλα χωρίς αποτέλεσμα

Εξάλλου στην αρχή είχα γράψει αυτό :

simosx μην εχεις απορεια για το

:Το πρώτο που πιστεύω ότι θέλει έλεγχο είναι
α.

zoro έγραψε:rfkill list
5: phy5: Wireless LAN
Soft blocked: no
Hard blocked: no



Δεν είναι blocked, ωστόσο αυτό είναι το 5. Υπάρχουν άλλα που ενδεχομένως είναι blocked, αλλά το όνομα είναι τεχνικό και δεν παραπέμπει σε ασύρματο;

Απλά είχε πάει στο 5 γιατί έκανα πειραματισμούς (άνοιξε-κλεισε) με διάφορες εντολές μπας και μπορέσω να το φτιάξω με ότι διάβασα σε ξένα φόρουμ.

Οι εντολές ήταν αυτές που έδωσες τώρα. Το πως είχε φτάσει μέχρι το 5, δεν ξέρω να σου πω.
Να φανταστείς ότι χρησιμοποίησα και παλιότερο πυρήνα μπας και βγάλω άκρη.

Είναι αυτό που λέει :

Άσε! Έχω δοκιμάσει τα πάντα αλλά δεν γίνετε τίποτα.

Off topic:
Ξέρω ότι γίνομαι κουραστικός, αλλά σας Ευχαριστώ που ασχολείστε τόσο ενεργά με το πρόβλημα μου ιδικά ο simosx

[Learner]

Έχεις δοκιμάσει

Κώδικας: Επιλογή όλων

sudo modprobe -v wistron_btns

περίμενε μερικά δευτερόλεπτα και μετά κοίτα αν δουλεύει το κουμπί ON/OFF του ασύρματου.

[zoro]

Έχεις δοκιμάσει

Κώδικας: Επιλογή όλων

sudo modprobe -v wistron_btns

περίμενε μερικά δευτερόλεπτα και μετά κοίτα αν δουλεύει το κουμπί ON/OFF του ασύρματου.

Τίποτα. Μόνο αυτό :


κάτω απ'την οθόνη μπορείς να δεις και το κουμπί του ασύρματου. Παρεμπιπτόντως τα άλλα τρία(3) κουμπιά δουλεύουν κανονικά.

Τέλος αυτό είναι το "dmesg" με ενεργό το ασύρματο, αφού έκανα πρώτα boot απ'τα Windows.(Μπας και φανεί κάτι παραπάνω).

Spoiler: show

Κώδικας: Επιλογή όλων

[ 0.390969] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.390995] vgaarb: loaded
[ 0.390998] vgaarb: bridge control possible 0000:00:02.0
[ 0.391215] i2c-core: driver [aat2870] using legacy suspend method
[ 0.391218] i2c-core: driver [aat2870] using legacy resume method
[ 0.391365] SCSI subsystem initialized
[ 0.391456] libata version 3.00 loaded.
[ 0.391536] usbcore: registered new interface driver usbfs
[ 0.391561] usbcore: registered new interface driver hub
[ 0.391605] usbcore: registered new device driver usb
[ 0.391757] PCI: Using ACPI for IRQ routing
[ 0.404067] PCI: pci_cache_line_size set to 64 bytes
[ 0.404267] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.404271] reserve RAM buffer: 000000007f690000 - 000000007fffffff
[ 0.404490] NetLabel: Initializing
[ 0.404494] NetLabel: domain hash size = 128
[ 0.404496] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.404513] NetLabel: unlabeled traffic allowed by default
[ 0.404754] hpet clockevent registered
[ 0.404760] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.404768] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.404776] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.408118] Switching to clocksource hpet
[ 0.422727] AppArmor: AppArmor Filesystem Enabled
[ 0.422778] pnp: PnP ACPI init
[ 0.422811] ACPI: bus type pnp registered
[ 0.423317] pnp 00:00: [bus 00-ff]
[ 0.423322] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.423326] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.423330] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.423334] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.423338] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.423342] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.423345] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.423349] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.423353] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.423357] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.423361] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.423365] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.423369] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.423372] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.423376] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.423380] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.423384] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.423388] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.423496] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.423541] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.423545] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.423548] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.423552] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.423556] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.423559] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.423563] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.423566] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.423668] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.423673] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.423678] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.423683] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.423687] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.423692] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.423697] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.423701] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.423707] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.460135] pnp 00:02: [io 0x0000-0x001f]
[ 0.460141] pnp 00:02: [io 0x0081-0x0091]
[ 0.460144] pnp 00:02: [io 0x0093-0x009f]
[ 0.460148] pnp 00:02: [io 0x00c0-0x00df]
[ 0.460152] pnp 00:02: [dma 4]
[ 0.460266] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.460814] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.460890] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.460946] pnp 00:04: [io 0x00f0]
[ 0.460964] pnp 00:04: [irq 13]
[ 0.461038] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.461057] pnp 00:05: [io 0x002e-0x002f]
[ 0.461060] pnp 00:05: [io 0x0061]
[ 0.461063] pnp 00:05: [io 0x0063]
[ 0.461066] pnp 00:05: [io 0x0065]
[ 0.461070] pnp 00:05: [io 0x0067]
[ 0.461073] pnp 00:05: [io 0x0070]
[ 0.461076] pnp 00:05: [io 0x0080]
[ 0.461079] pnp 00:05: [io 0x0092]
[ 0.461082] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.461086] pnp 00:05: [io 0x0800-0x080f]
[ 0.461089] pnp 00:05: [io 0x1000-0x107f]
[ 0.461092] pnp 00:05: [io 0x1180-0x11bf]
[ 0.461096] pnp 00:05: [io 0x1640-0x164f]
[ 0.461099] pnp 00:05: [io 0x1200-0x120f]
[ 0.461242] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.461247] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.461251] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.461256] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.461260] system 00:05: [io 0x1200-0x120f] has been reserved
[ 0.461266] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461312] pnp 00:06: [io 0x06a0-0x06af]
[ 0.461316] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.461424] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.461428] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.461434] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461450] pnp 00:07: [io 0x0070-0x0077]
[ 0.461459] pnp 00:07: [irq 8]
[ 0.461533] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.461712] pnp 00:08: [io 0x0060]
[ 0.461716] pnp 00:08: [io 0x0064]
[ 0.461724] pnp 00:08: [irq 1]
[ 0.461807] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.461828] pnp 00:09: [irq 12]
[ 0.461907] pnp 00:09: Plug and Play ACPI device, IDs SYN0301 SYN0300 SYN0002 PNP0f13 (active)
[ 0.461946] pnp: PnP ACPI: found 10 devices
[ 0.461949] ACPI: ACPI bus type pnp unregistered
[ 0.461955] PnPBIOS: Disabled by ACPI PNP
[ 0.499775] PCI: max bus depth: 2 pci_try_num: 3
[ 0.499848] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.499857] pci 0000:00:1e.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.499863] pci 0000:00:1c.1: BAR 15: assigned [mem 0x84000000-0x841fffff 64bit pref]
[ 0.499869] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.499875] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref]
[ 0.499880] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.499886] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.499895] pci 0000:00:1c.0: bridge window [mem 0xd2000000-0xd3ffffff]
[ 0.499902] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.499913] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.499918] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.499927] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd40fffff]
[ 0.499934] pci 0000:00:1c.1: bridge window [mem 0x84000000-0x841fffff 64bit pref]
[ 0.499947] pci 0000:0a:06.4: BAR 0: assigned [mem 0xd4101100-0xd41011ff]
[ 0.499956] pci 0000:0a:06.4: BAR 0: set to [mem 0xd4101100-0xd41011ff] (PCI address [0xd4101100-0xd41011ff])
[ 0.499963] pci 0000:0a:06.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.499968] pci 0000:0a:06.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.499973] pci 0000:0a:06.0: BAR 14: assigned [io 0x3000-0x30ff]
[ 0.499977] pci 0000:0a:06.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.499981] pci 0000:0a:06.0: CardBus bridge to [bus 0b-0e]
[ 0.499985] pci 0000:0a:06.0: bridge window [io 0x3400-0x34ff]
[ 0.499992] pci 0000:0a:06.0: bridge window [io 0x3000-0x30ff]
[ 0.500020] pci 0000:0a:06.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.500028] pci 0000:0a:06.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.500036] pci 0000:00:1e.0: PCI bridge to [bus 0a-0b]
[ 0.500041] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.500050] pci 0000:00:1e.0: bridge window [mem 0xd4100000-0xd41fffff]
[ 0.500057] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.500102] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.500111] pci 0000:00:1c.0: setting latency timer to 64
[ 0.500130] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.500137] pci 0000:00:1c.1: setting latency timer to 64
[ 0.500149] pci 0000:00:1e.0: setting latency timer to 64
[ 0.500164] pci 0000:0a:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.500173] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.500177] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.500182] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.500186] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd3ffffff]
[ 0.500190] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.500194] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.500198] pci_bus 0000:04: resource 1 [mem 0xd4000000-0xd40fffff]
[ 0.500203] pci_bus 0000:04: resource 2 [mem 0x84000000-0x841fffff 64bit pref]
[ 0.500207] pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
[ 0.500211] pci_bus 0000:0a: resource 1 [mem 0xd4100000-0xd41fffff]
[ 0.500215] pci_bus 0000:0a: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.500219] pci_bus 0000:0a: resource 4 [io 0x0000-0xffff]
[ 0.500223] pci_bus 0000:0a: resource 5 [mem 0x00000000-0xffffffff]
[ 0.500227] pci_bus 0000:0b: resource 0 [io 0x3400-0x34ff]
[ 0.500231] pci_bus 0000:0b: resource 1 [io 0x3000-0x30ff]
[ 0.500235] pci_bus 0000:0b: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.500239] pci_bus 0000:0b: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.500313] NET: Registered protocol family 2
[ 0.500435] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.500821] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.501637] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.502045] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.502048] TCP reno registered
[ 0.502054] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.502074] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.502220] NET: Registered protocol family 1
[ 0.502248] pci 0000:00:02.0: Boot video device
[ 0.502300] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.502324] pci 0000:00:1d.0: PCI INT A disabled
[ 0.502336] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.502359] pci 0000:00:1d.1: PCI INT B disabled
[ 0.502376] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.502399] pci 0000:00:1d.2: PCI INT C disabled
[ 0.502415] pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.502438] pci 0000:00:1d.3: PCI INT D disabled
[ 0.502452] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.502488] pci 0000:00:1d.7: PCI INT A disabled
[ 0.502563] PCI: CLS 64 bytes, default 64
[ 0.502573] Simple Boot Flag at 0x36 set to 0x1
[ 0.503148] audit: initializing netlink socket (disabled)
[ 0.503163] type=2000 audit(1351342177.496:1): initialized
[ 0.535591] highmem bounce pool size: 64 pages
[ 0.535601] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.539165] VFS: Disk quotas dquot_6.5.2
[ 0.539277] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.540235] fuse init (API version 7.17)
[ 0.540396] msgmni has been set to 1685
[ 0.540923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.540969] io scheduler noop registered
[ 0.540972] io scheduler deadline registered
[ 0.540983] io scheduler cfq registered (default)
[ 0.541192] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.541270] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.541378] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.541444] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.541596] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.541644] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.541785] intel_idle: MWAIT substates: 0x22220
[ 0.541788] intel_idle: does not run on family 6 model 14
[ 0.556094] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.572117] ACPI: AC Adapter [ADP1] (on-line)
[ 0.572260] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.588090] ACPI: Lid Switch [LID0]
[ 0.588209] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.588220] ACPI: Sleep Button [SLPB]
[ 0.588329] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.588334] ACPI: Power Button [PWRF]
[ 0.604216] Marking TSC unstable due to TSC halts in idle
[ 0.604237] ACPI: acpi_idle registered with cpuidle
[ 0.624511] Freeing initrd memory: 14020k freed
[ 0.800087] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.800092] ACPI: Thermal Zone [TZS0] (41 C)
[ 0.868081] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.868085] ACPI: Thermal Zone [TZS1] (46 C)
[ 0.868127] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.868144] ACPI: Battery Slot [BAT0] (battery present)
[ 0.868193] ERST: Table is not found!
[ 0.868196] GHES: HEST is not enabled!
[ 0.868316] isapnp: Scanning for PnP cards...
[ 0.868427] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.222360] isapnp: No Plug & Play device found
[ 1.408583] Linux agpgart interface v0.103
[ 1.408739] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 1.408822] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.409661] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.409856] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.412600] brd: module loaded
[ 1.414021] loop: module loaded
[ 1.414257] ahci 0000:00:1f.2: version 3.0
[ 1.414276] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.414349] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.414440] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.414446] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.414453] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.415260] scsi0 : ahci
[ 1.415419] scsi1 : ahci
[ 1.415554] scsi2 : ahci
[ 1.415691] scsi3 : ahci
[ 1.415910] ata1: SATA max UDMA/133 abar m1024@0xd4544400 port 0xd4544500 irq 42
[ 1.415914] ata2: DUMMY
[ 1.415918] ata3: SATA max UDMA/133 abar m1024@0xd4544400 port 0xd4544600 irq 42
[ 1.415921] ata4: DUMMY
[ 1.416052] ata_piix 0000:00:1f.1: version 2.13
[ 1.416065] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.416115] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.416647] scsi4 : ata_piix
[ 1.416768] scsi5 : ata_piix
[ 1.417315] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.417320] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.417964] Fixed MDIO Bus: probed
[ 1.418002] tun: Universal TUN/TAP device driver, 1.6
[ 1.418006] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.418100] PPP generic driver version 2.4.2
[ 1.418185] ata6: port disabled--ignoring
[ 1.418287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.418314] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.418334] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.418339] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.418417] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.418447] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.418463] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.422350] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.422374] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd4544000
[ 1.436027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.436256] hub 1-0:1.0: USB hub found
[ 1.436264] hub 1-0:1.0: 8 ports detected
[ 1.436409] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.436434] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.436462] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.436473] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.436478] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.436559] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.436592] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.436810] hub 2-0:1.0: USB hub found
[ 1.436817] hub 2-0:1.0: 2 ports detected
[ 1.436930] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.436941] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.436946] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.437023] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.437071] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.437300] hub 3-0:1.0: USB hub found
[ 1.437306] hub 3-0:1.0: 2 ports detected
[ 1.437422] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.437433] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.437438] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.437512] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.437561] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.437780] hub 4-0:1.0: USB hub found
[ 1.437786] hub 4-0:1.0: 2 ports detected
[ 1.437895] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.437906] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.437911] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.437994] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.438040] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 1.438264] hub 5-0:1.0: USB hub found
[ 1.438271] hub 5-0:1.0: 2 ports detected
[ 1.438468] usbcore: registered new interface driver libusual
[ 1.438547] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.438924] i8042: Detected active multiplexing controller, rev 1.1
[ 1.439022] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.439032] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.439084] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.439128] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.439177] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.439390] mousedev: PS/2 mouse device common for all mice
[ 1.439722] rtc_cmos 00:07: RTC can wake from S4
[ 1.439896] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.439934] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.440051] device-mapper: uevent: version 1.0.3
[ 1.440188] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.440245] EISA: Probing bus 0 at eisa.0
[ 1.440256] Cannot allocate resource for EISA slot 1
[ 1.440262] Cannot allocate resource for EISA slot 2
[ 1.440275] Cannot allocate resource for EISA slot 3
[ 1.440279] Cannot allocate resource for EISA slot 4
[ 1.440302] EISA: Detected 0 cards.
[ 1.440319] cpufreq-nforce2: No nForce2 chipset.
[ 1.440431] cpuidle: using governor ladder
[ 1.440604] cpuidle: using governor menu
[ 1.440607] EFI Variables Facility v0.08 2004-May-17
[ 1.441089] TCP cubic registered
[ 1.441293] NET: Registered protocol family 10
[ 1.442317] NET: Registered protocol family 17
[ 1.442420] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.442448] Registering the dns_resolver key type
[ 1.442526] Using IPI No-Shortcut mode
[ 1.442843] PM: Hibernation image not present or could not be loaded.
[ 1.442861] registered taskstats version 1
[ 1.453343] Magic number: 0:115:836
[ 1.453493] rtc_cmos 00:07: setting system clock to 2012-10-27 12:49:39 UTC (1351342179)
[ 1.453890] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.453893] EDD information not available.
[ 1.580506] ata5.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33
[ 1.596393] ata5.00: configured for UDMA/33
[ 1.736145] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.736188] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.739562] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.740727] ata1.00: ATA-8: WDC WD3200BPVT-00HXZT1, 01.01A01, max UDMA/133
[ 1.740732] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.744254] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.744751] ata1.00: configured for UDMA/133
[ 1.745001] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-0 01.0 PQ: 0 ANSI: 5
[ 1.745236] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.745243] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.745333] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.745361] sd 0:0:0:0: [sda] Write Protect is off
[ 1.745368] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.745423] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.749528] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5
[ 1.754647] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.754652] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.754856] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.755017] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.795128] sda: sda1 sda2 sda4
[ 1.795859] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.795986] Freeing unused kernel memory: 740k freed
[ 1.796486] Write protecting the kernel text: 5824k
[ 1.796527] Write protecting the kernel read-only data: 2376k
[ 1.796530] NX-protecting the kernel data: 4416k
[ 1.819436] udevd[97]: starting version 175
[ 1.856328] xor: automatically using best checksumming function: pIII_sse
[ 1.876017] pIII_sse : 4047.000 MB/sec
[ 1.876022] xor: using function: pIII_sse (4047.000 MB/sec)
[ 1.878941] device-mapper: dm-raid45: initialized v0.2594b
[ 1.932086] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 2.126719] input: OM as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
[ 2.126988] generic-usb 0003:04F3:0234.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:1d.2-2/input0
[ 2.127015] usbcore: registered new interface driver usbhid
[ 2.127018] usbhid: USB HID core driver
[ 2.183349] sky2: driver version 1.30
[ 2.183438] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.183490] sky2 0000:02:00.0: setting latency timer to 64
[ 2.183603] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[ 2.192087] sdhci: Secure Digital Host Controller Interface driver
[ 2.192092] sdhci: Copyright(c) Pierre Ossman
[ 2.195065] sdhci-pci 0000:0a:06.2: SDHCI controller found [1524:0550] (rev 1)
[ 2.195103] sdhci-pci 0000:0a:06.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.195166] mmc0: no vmmc regulator found
[ 2.195210] Registered led device: mmc0::
[ 2.203609] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 2.209670] sky2 0000:02:00.0: eth0: addr 00:0a:e4:b8:f7:70
[ 2.216448] mmc0: SDHCI controller on PCI [0000:0a:06.2] using PIO
[ 2.216474] sdhci-pci 0000:0a:06.4: SDHCI controller found [1524:0551] (rev 1)
[ 2.216491] sdhci-pci 0000:0a:06.4: enabling device (0004 -> 0006)
[ 2.216504] sdhci-pci 0000:0a:06.4: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.216548] mmc1: no vmmc regulator found
[ 2.216596] Registered led device: mmc1::
[ 2.220949] mmc1: SDHCI controller on PCI [0000:0a:06.4] using PIO
[ 2.364219] ACPI: Battery Slot [BAT0] (battery present)
[ 2.551217] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 17.237230] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.268761] udevd[363]: starting version 175
[ 17.314317] lp: driver loaded but no devices found
[ 17.389003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 17.389555] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.431200] Adding 1178620k swap on /dev/sda4. Priority:-1 extents:1 across:1178620k
[ 17.568062] device-mapper: multipath: version 1.3.0 loaded
[ 17.573855] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 17.616141] intel_rng: FWH not detected
[ 17.638801] leds_ss4200: no LED devices found
[ 17.652372] cfg80211: Calling CRDA to update world regulatory domain
[ 17.657571] yenta_cardbus 0000:0a:06.0: CardBus bridge found [1734:10c1]
[ 17.657598] yenta_cardbus 0000:0a:06.0: Enabling burst memory read transactions
[ 17.657606] yenta_cardbus 0000:0a:06.0: Using CSCINT to route CSC interrupts to PCI
[ 17.657610] yenta_cardbus 0000:0a:06.0: Routing CardBus interrupts to PCI
[ 17.657618] yenta_cardbus 0000:0a:06.0: TI: mfunc 0x00001202, devctl 0x44
[ 17.659277] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[ 17.680632] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
[ 17.692337] [drm] Initialized drm 1.1.0 20060810
[ 17.720345] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 17.720351] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 17.720440] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.720457] iwl3945 0000:04:00.0: setting latency timer to 64
[ 17.764487] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.764496] i915 0000:00:02.0: setting latency timer to 64
[ 17.764910] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 17.764916] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 17.765117] iwl3945 0000:04:00.0: irq 44 for MSI/MSI-X
[ 17.767919] Registered led device: phy0-led
[ 17.768041] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.768699] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.768703] [drm] Driver supports precise vblank timestamp query.
[ 17.773866] type=1400 audit(1351331395.816:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=553 comm="apparmor_parser"
[ 17.774537] type=1400 audit(1351331395.816:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser"
[ 17.774924] type=1400 audit(1351331395.816:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
[ 17.804119] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.829367] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 17.904059] yenta_cardbus 0000:0a:06.0: ISA IRQ mask 0x0cf8, PCI irq 22
[ 17.904067] yenta_cardbus 0000:0a:06.0: Socket status: 30000006
[ 17.904072] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 17.905647] yenta_cardbus 0000:0a:06.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 17.905653] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[ 17.905670] ppdev: user-space parallel port driver
[ 17.907243] excluding 0x3000-0x30ff 0x3400-0x34ff
[ 17.945913] yenta_cardbus 0000:0a:06.0: pcmcia: parent PCI bridge window: [mem 0xd4100000-0xd41fffff]
[ 17.945920] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4100000-0xd41fffff: excluding 0xd4100000-0xd410ffff
[ 17.945942] yenta_cardbus 0000:0a:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 17.945946] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[ 17.947011] Bluetooth: Core ver 2.16
[ 17.947078] NET: Registered protocol family 31
[ 17.947081] Bluetooth: HCI device and connection manager initialized
[ 17.947086] Bluetooth: HCI socket layer initialized
[ 17.947089] Bluetooth: L2CAP socket layer initialized
[ 17.947097] Bluetooth: SCO socket layer initialized
[ 17.956731] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.956737] Bluetooth: BNEP filters: protocol multicast
[ 17.968885] Bluetooth: RFCOMM TTY layer initialized
[ 17.968894] Bluetooth: RFCOMM socket layer initialized
[ 17.968897] Bluetooth: RFCOMM ver 1.11
[ 18.007978] type=1400 audit(1351331396.048:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=708 comm="apparmor_parser"
[ 18.008842] type=1400 audit(1351331396.052:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=708 comm="apparmor_parser"
[ 18.086559] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[ 18.095358] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
[ 18.245694] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[ 18.249156] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
[ 18.253404] init: failsafe main process (738) killed by TERM signal
[ 18.406954] type=1400 audit(1351331396.448:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=869 comm="apparmor_parser"
[ 18.410179] type=1400 audit(1351331396.452:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=868 comm="apparmor_parser"
[ 18.411791] [drm] initialized overlay support
[ 18.416687] type=1400 audit(1351331396.460:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=869 comm="apparmor_parser"
[ 18.417082] type=1400 audit(1351331396.460:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=869 comm="apparmor_parser"
[ 18.432343] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 18.436494] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 18.439380] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 18.443455] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.444297] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 18.444343] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 18.444386] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 18.444426] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 18.447288] type=1400 audit(1351331396.488:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=875 comm="apparmor_parser"
[ 18.450766] clean.
[ 18.462882] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0
[ 18.463054] sky2 0000:02:00.0: eth0: enabling interface
[ 18.472552] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.476410] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.502831] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[ 18.506341] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
[ 18.521272] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.521278] cfg80211: World regulatory domain updated:
[ 18.521281] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.521286] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.521290] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.521294] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.521299] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.521303] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.527938] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 18.613236] fbcon: inteldrmfb (fb0) is primary device
[ 18.614131] Console: switching to colour frame buffer device 160x50
[ 18.614214] fb0: inteldrmfb frame buffer device
[ 18.614217] drm: registered panic notifier
[ 18.614353] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 18.614436] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 18.614551] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 18.614593] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 18.638045] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[ 18.676530] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 18.710267] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.711676] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.892648] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 18.897315] zram: Creating 2 devices ...
[ 18.913225] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[ 18.925630] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
[ 18.932562] Adding 512988k swap on /dev/zram0. Priority:5 extents:1 across:512988k SS
[ 18.941355] Adding 512988k swap on /dev/zram1. Priority:5 extents:1 across:512988k SS
[ 20.330902] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0