Προβλημα με wireless και Ubuntu 8.04  Το θέμα επιλύθηκε

...κάρτες δικτύου, modems, προβλήματα internet
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα των εντολών στο τερματικό :
lspci -nn
lsusb
rfkill list

Re: Προβλημα με wireless και Ubuntu 8.04

Δημοσίευσηαπό linuxman » 05 Μάιος 2009, 23:23

diamond_gr έγραψε:Off topic:
Βάλε Windows XP για να παίζουν όλα.

Τι είναι αυτά που λες τώρα ?
Οδηγίες προς Νεοεισερχόμενους
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Ικανοποιητικό ┃ Αγγλικών: Ικανοποιητικό
2 Linux Mint 17.1 Rebecca 3.13.0-37-generic 64bit (el_GR.UTF-8, X-Cinnamon cinnamon)
3 Intel Core i5-2310M CPU @ 2.10GHz ‖ RAM 3866 MiB ‖ Dell Inc. 0D7C51 - Dell Inc. Dell System Vostro 3750
4 Intel 2nd Generation Core Processor Family Integrated Graphics [8086:0116] {i915}
5 wlan0: Intel Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) ⋮ eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
http://www.greeklug.gr
Άβαταρ μέλους
linuxman
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10378
Εγγραφή: 10 Μάιος 2008, 20:41
Τοποθεσία: Thessaloniki / Macedonia / Greece
Εκτύπωση

Re: Προβλημα με wireless και Ubuntu 8.04

Δημοσίευσηαπό logari81 » 06 Μάιος 2009, 00:01

giorgosk_80 έγραψε:
Η εγκατσταση εγινε ως εξης: Bootαρα απο το Live CD, το αφησα να φορτωσει την επιφανεια εργασιας και εκανα την εγκατασταση μεσα απο το CD σε ενα partition που ειχα δημιουργησει σε δευτερο εσωτερικο σκληρο δισκο.


ωραία αρα εκανες κανονική εγκατασταση, ποσταρε τωρα το αποτελεσμα του
Κώδικας: Επιλογή όλων
lspci -nn

που σου ζήτησα.
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Προβλημα με wireless και Ubuntu 8.04

Δημοσίευσηαπό giorgosk_80 » 06 Μάιος 2009, 21:36

Οριστε και τα αποτελεσματα.


Κώδικας: Επιλογή όλων
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV530 [Radeon X1600] [1002:71c2]
01:00.1 Display controller [0380]: ATI Technologies Inc RV530 [Radeon X1600] (Secondary) [1002:71e2]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
04:00.0 Modem [0703]: Smart Link Ltd. Unknown device [2000:2800] (rev 02)
04:01.0 Network controller [0280]: RaLink RT2561/RT61 802.11g PCI [1814:0301]



XP εχω ηδη.... Καθε μερα φασολαδα? Βαρεθηκα!
giorgosk_80
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 04 Μάιος 2009, 19:29
Εκτύπωση

Re: Προβλημα με wireless και Ubuntu 8.04

Δημοσίευσηαπό logari81 » 06 Μάιος 2009, 21:47

αυτήν είναι η κάρτα σου
έγραψε:04:01.0 Network controller [0280]: RaLink RT2561/RT61 802.11g PCI [1814:0301]

και θα επρεπε να δουλευει με τον rt61 οδηγό που πριλαμβανεται στον πυρήνα του λινουξ που χρησιμοποιεις. Δωσε μας λιγο τα αποτελεσματα των εντολών:
Κώδικας: Επιλογή όλων
iwconfig
sudo iwlist scan
dmesg
lsmod
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Προβλημα με wireless και Ubuntu 8.04

Δημοσίευσηαπό giorgosk_80 » 06 Μάιος 2009, 23:02

Οριστε και τα αποτελεσματα των παραπανω. Τι ακριβως ψαχνουμε να βρουμε?

Κώδικας: Επιλογή όλων
iwconfig


lo no wireless extensions.

eth0 no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0


Κώδικας: Επιλογή όλων

sudo iwlist scan

[sudo] password for giorgos:

lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wmaster0 Interface doesn't support scanning.

wlan0 Interface doesn't support scanning : Network is down



Κώδικας: Επιλογή όλων

dmesg

[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1875.733 MHz processor.
[ 21.413231] Console: colour VGA+ 80x25
[ 21.413234] console [tty0] enabled
[ 21.413419] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 21.413649] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.498389] Memory: 2067056k/2097088k available (2179k kernel code, 28716k reserved, 1008k data, 368k init, 1179584k highmem)
[ 21.498396] virtual kernel memory layout:
[ 21.498397] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 21.498398] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.498399] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 21.498400] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 21.498400] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
[ 21.498401] .data : 0xc0320d78 - 0xc041cdc4 (1008 kB)
[ 21.498402] .text : 0xc0100000 - 0xc0320d78 (2179 kB)
[ 21.498405] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.498443] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 21.498575] hpet clockevent registered
[ 21.578442] Calibrating delay using timer specific routine.. 3754.28 BogoMIPS (lpj=7508573)
[ 21.578462] Security Framework initialized
[ 21.578467] SELinux: Disabled at boot.
[ 21.578480] AppArmor: AppArmor initialized
[ 21.578483] Failure registering capabilities with primary security module.
[ 21.578490] Mount-cache hash table entries: 512
[ 21.578602] Initializing cgroup subsys ns
[ 21.578607] Initializing cgroup subsys cpuacct
[ 21.578617] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
[ 21.578624] monitor/mwait feature present.
[ 21.578625] using mwait in idle threads.
[ 21.578629] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 21.578631] CPU: L2 cache: 2048K
[ 21.578633] CPU: Physical Processor ID: 0
[ 21.578635] CPU: Processor Core ID: 0
[ 21.578637] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e3bd 00000000 00000001 00000000
[ 21.578645] Compat vDSO mapped to ffffe000.
[ 21.578657] Checking 'hlt' instruction... OK.
[ 21.594807] SMP alternatives: switching to UP code
[ 21.596282] Early unpacking initramfs... done
[ 21.898628] ACPI: Core revision 20070126
[ 21.898661] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 21.900679] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 21.900694] SMP alternatives: switching to SMP code
[ 21.901330] Booting processor 1/1 eip 3000
[ 21.911479] Initializing CPU#1
[ 21.989729] Calibrating delay using timer specific routine.. 3751.39 BogoMIPS (lpj=7502782)
[ 21.989735] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
[ 21.989740] monitor/mwait feature present.
[ 21.989743] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 21.989744] CPU: L2 cache: 2048K
[ 21.989746] CPU: Physical Processor ID: 0
[ 21.989747] CPU: Processor Core ID: 1
[ 21.989749] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e3bd 00000000 00000001 00000000
[ 21.990204] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 21.990222] Total of 2 processors activated (7505.67 BogoMIPS).
[ 21.990364] ENABLING IO-APIC IRQs
[ 21.990528] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 22.137573] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 22.157555] Brought up 2 CPUs
[ 22.157577] CPU0 attaching sched-domain:
[ 22.157579] domain 0: span 03
[ 22.157581] groups: 01 02
[ 22.157584] CPU1 attaching sched-domain:
[ 22.157585] domain 0: span 03
[ 22.157587] groups: 02 01
[ 22.157793] net_namespace: 64 bytes
[ 22.157804] Booting paravirtualized kernel on bare hardware
[ 22.158203] Time: 22:51:49 Date: 05/06/09
[ 22.158227] NET: Registered protocol family 16
[ 22.158405] EISA bus registered
[ 22.158409] ACPI: bus type pci registered
[ 22.164391] PCI: PCI BIOS revision 3.00 entry at 0xfae00, last bus=4
[ 22.164393] PCI: Using configuration type 1
[ 22.164418] Setting up standard PCI resources
[ 22.169647] ACPI: EC: Look up EC in DSDT
[ 22.173372] ACPI: Interpreter enabled
[ 22.173375] ACPI: (supports S0 S1 S4 S5)
[ 22.173386] ACPI: Using IOAPIC for interrupt routing
[ 22.177054] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 22.177565] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 22.177569] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 22.178246] PCI: Transparent bridge - 0000:00:1e.0
[ 22.178273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 22.178392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 22.178455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 22.178517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 22.186071] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 22.186155] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 22.186238] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 22.186320] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 22.186402] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 22.186483] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 22.186565] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 22.186648] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 22.186756] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.186784] pnp: PnP ACPI init
[ 22.186791] ACPI: bus type pnp registered
[ 22.188741] pnpacpi: exceeded the max number of mem resources: 12
[ 22.188866] pnp: PnP ACPI: found 13 devices
[ 22.188868] ACPI: ACPI bus type pnp unregistered
[ 22.188872] PnPBIOS: Disabled by ACPI PNP
[ 22.189087] PCI: Using ACPI for IRQ routing
[ 22.189090] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 22.233563] NET: Registered protocol family 8
[ 22.233565] NET: Registered protocol family 20
[ 22.233601] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 22.233605] hpet0: 3 64-bit timers, 14318180 Hz
[ 22.234635] AppArmor: AppArmor Filesystem Enabled
[ 22.237418] Time: tsc clocksource has been installed.
[ 22.237429] Switched to high resolution mode on CPU 0
[ 22.237523] Switched to high resolution mode on CPU 1
[ 22.261422] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 22.261426] system 00:01: ioport range 0x290-0x29f has been reserved
[ 22.261428] system 00:01: ioport range 0x800-0x87f has been reserved
[ 22.261431] system 00:01: ioport range 0x290-0x294 has been reserved
[ 22.261434] system 00:01: ioport range 0x880-0x88f has been reserved
[ 22.261444] system 00:09: ioport range 0x400-0x4bf could not be reserved
[ 22.261451] system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 22.261457] system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
[ 22.261460] system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
[ 22.261463] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 22.261466] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 22.261469] system 00:0b: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 22.261472] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 22.261475] system 00:0b: iomem range 0x100000-0x7ffeffff could not be reserved
[ 22.261478] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 22.261481] system 00:0b: iomem range 0xfed13000-0xfed1dfff could not be reserved
[ 22.261484] system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 22.261487] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 22.261490] system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 22.291865] PCI: Bridge: 0000:00:01.0
[ 22.291868] IO window: 9000-9fff
[ 22.291871] MEM window: d0000000-d1ffffff
[ 22.291874] PREFETCH window: c0000000-cfffffff
[ 22.291877] PCI: Bridge: 0000:00:1c.0
[ 22.291879] IO window: 8000-8fff
[ 22.291883] MEM window: disabled.
[ 22.291886] PREFETCH window: disabled.
[ 22.291890] PCI: Bridge: 0000:00:1c.3
[ 22.291892] IO window: a000-afff
[ 22.291896] MEM window: d2000000-d3ffffff
[ 22.291899] PREFETCH window: 88000000-880fffff
[ 22.291904] PCI: Bridge: 0000:00:1e.0
[ 22.291905] IO window: disabled.
[ 22.291909] MEM window: d5000000-d50fffff
[ 22.291912] PREFETCH window: d4000000-d4ffffff
[ 22.291925] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.291929] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 22.291945] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.291950] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 22.291965] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 22.291970] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 22.291979] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 22.291988] NET: Registered protocol family 2
[ 22.329322] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 22.329543] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 22.329940] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 22.330141] TCP: Hash tables configured (established 131072 bind 65536)
[ 22.330144] TCP reno registered
[ 22.341379] checking if image is initramfs... it is
[ 22.938293] Freeing initrd memory: 7326k freed
[ 22.939015] audit: initializing netlink socket (disabled)
[ 22.939027] audit(1241650309.317:1): initialized
[ 22.939225] highmem bounce pool size: 64 pages
[ 22.941055] VFS: Disk quotas dquot_6.5.1
[ 22.941121] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.941240] io scheduler noop registered
[ 22.941242] io scheduler anticipatory registered
[ 22.941244] io scheduler deadline registered
[ 22.941254] io scheduler cfq registered (default)
[ 22.941334] Boot video device is 0000:01:00.0
[ 22.941427] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 22.941459] assign_interrupt_mode Found MSI capability
[ 22.941486] Allocate Port Service[0000:00:01.0:pcie00]
[ 22.941555] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 22.941591] assign_interrupt_mode Found MSI capability
[ 22.941621] Allocate Port Service[0000:00:1c.0:pcie00]
[ 22.941654] Allocate Port Service[0000:00:1c.0:pcie02]
[ 22.941727] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 22.941763] assign_interrupt_mode Found MSI capability
[ 22.941792] Allocate Port Service[0000:00:1c.3:pcie00]
[ 22.941822] Allocate Port Service[0000:00:1c.3:pcie02]
[ 22.942043] isapnp: Scanning for PnP cards...
[ 23.294823] isapnp: No Plug & Play device found
[ 23.317925] Real Time Clock Driver v1.12ac
[ 23.318021] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 23.318131] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.318686] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.318841] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 23.318849] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 23.319444] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 23.319503] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 23.319638] PNP: No PS/2 controller found. Probing ports directly.
[ 23.352729] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 23.352731] If AUX port is really absent please use the 'i8042.noaux' option.
[ 23.603136] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.623105] mice: PS/2 mouse device common for all mice
[ 23.623221] EISA: Probing bus 0 at eisa.0
[ 23.623248] Cannot allocate resource for EISA slot 8
[ 23.623250] EISA: Detected 0 cards.
[ 23.623253] cpuidle: using governor ladder
[ 23.623255] cpuidle: using governor menu
[ 23.623342] NET: Registered protocol family 1
[ 23.623366] Using IPI No-Shortcut mode
[ 23.623392] registered taskstats version 1
[ 23.623480] Magic number: 9:118:906
[ 23.623505] hash matches device ptyz2
[ 23.623529] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 23.623530] EDD information not available.
[ 23.623672] Freeing unused kernel memory: 368k freed
[ 23.623698] Write protecting the kernel read-only data: 806k
[ 24.809782] fuse init (API version 7.9)
[ 24.826038] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 24.826149] ACPI: SSDT 7FFF6F80, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 24.826268] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 24.987362] usbcore: registered new interface driver usbfs
[ 24.987384] usbcore: registered new interface driver hub
[ 24.987409] usbcore: registered new device driver usb
[ 24.988385] USB Universal Host Controller Interface driver v3.0
[ 24.988427] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 24.988437] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 24.988440] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 24.988618] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 24.988642] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000b000
[ 24.988757] usb usb1: configuration #1 chosen from 1 choice
[ 24.988778] hub 1-0:1.0: USB hub found
[ 24.988783] hub 1-0:1.0: 2 ports detected
[ 25.093515] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 25.093526] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 25.093530] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 25.093552] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 25.093578] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b400
[ 25.093680] usb usb2: configuration #1 chosen from 1 choice
[ 25.093703] hub 2-0:1.0: USB hub found
[ 25.093707] hub 2-0:1.0: 2 ports detected
[ 25.184703] SCSI subsystem initialized
[ 25.197346] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 25.197357] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 25.197361] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 25.197384] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 25.197410] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000b800
[ 25.197521] usb usb3: configuration #1 chosen from 1 choice
[ 25.197542] hub 3-0:1.0: USB hub found
[ 25.197547] hub 3-0:1.0: 2 ports detected
[ 25.200857] Floppy drive(s): fd0 is 1.44M
[ 25.200909] libata version 3.00 loaded.
[ 25.220880] FDC 0 is a post-1991 82077
[ 25.301183] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 25.301196] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 25.301200] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 25.301221] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 25.301247] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 25.301346] usb usb4: configuration #1 chosen from 1 choice
[ 25.301372] hub 4-0:1.0: USB hub found
[ 25.301376] hub 4-0:1.0: 2 ports detected
[ 25.405009] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 25.405023] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 25.405027] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 25.405049] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 25.408962] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 25.408968] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd5104000
[ 25.424852] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 25.424946] usb usb5: configuration #1 chosen from 1 choice
[ 25.424968] hub 5-0:1.0: USB hub found
[ 25.424972] hub 5-0:1.0: 8 ports detected
[ 25.529003] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 25.529025] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 25.529041] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 25.529337] eth0: RTL8168b/8111b at 0xf8844000, 00:16:e6:84:24:09, XID 38000000 IRQ 220
[ 25.532002] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
[ 25.532032] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 25.532043] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 25.532065] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
[ 25.532082] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 25.532091] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 25.535182] ata_piix 0000:00:1f.1: version 2.12
[ 25.535194] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
[ 25.535217] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 25.535273] scsi0 : ata_piix
[ 25.535316] scsi1 : ata_piix
[ 25.535760] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 25.535763] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 25.856593] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H22L, 1.02, max UDMA/66
[ 26.027733] ata1.00: configured for UDMA/66
[ 26.106676] usb 5-7: new high speed USB device using ehci_hcd and address 3
[ 26.194563] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H22L 1.02 PQ: 0 ANSI: 5
[ 26.194642] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 26.194665] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
[ 26.194698] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 26.194731] scsi2 : ata_piix
[ 26.194784] scsi3 : ata_piix
[ 26.195253] ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 17
[ 26.195256] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 17
[ 26.239812] usb 5-7: configuration #1 chosen from 1 choice
[ 26.240111] hub 5-7:1.0: USB hub found
[ 26.240341] hub 5-7:1.0: 4 ports detected
[ 26.386377] ata3.01: HPA unlocked: 488395055 -> 488397168, native 488397168
[ 26.386384] ata3.01: ATA-7: WDC WD2500JS-00NCB1, 10.02E02, max UDMA/133
[ 26.386388] ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 26.394481] ata3.01: configured for UDMA/133
[ 26.582873] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 26.613401] ata4.01: ATA-8: ST31000333AS, LC15, max UDMA/133
[ 26.613405] ata4.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 26.669752] ata4.01: configured for UDMA/133
[ 26.669879] scsi 2:0:1:0: Direct-Access ATA WDC WD2500JS-00N 10.0 PQ: 0 ANSI: 5
[ 26.670018] scsi 3:0:1:0: Direct-Access ATA ST31000333AS LC15 PQ: 0 ANSI: 5
[ 26.677720] Driver 'sr' needs updating - please use bus_type methods
[ 26.679521] Driver 'sd' needs updating - please use bus_type methods
[ 26.682172] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 26.682175] Uniform CD-ROM driver Revision: 3.20
[ 26.682218] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 26.685723] sd 2:0:1:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 26.685735] sd 2:0:1:0: [sda] Write Protect is off
[ 26.685738] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 26.685754] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.685797] sd 2:0:1:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 26.685807] sd 2:0:1:0: [sda] Write Protect is off
[ 26.685809] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 26.685825] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.685828] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 26.685991] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 26.686008] scsi 3:0:1:0: Attached scsi generic sg2 type 0
[ 26.700944] sda1
[ 26.701060] sd 2:0:1:0: [sda] Attached SCSI disk
[ 26.701113] sd 3:0:1:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 26.701126] sd 3:0:1:0: [sdb] Write Protect is off
[ 26.701128] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 26.701147] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.701204] sd 3:0:1:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 26.701214] sd 3:0:1:0: [sdb] Write Protect is off
[ 26.701216] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 26.701232] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.701235] sdb: sdb1 sdb2
[ 26.723092] sd 3:0:1:0: [sdb] Attached SCSI disk
[ 26.767850] usb 3-1: configuration #1 chosen from 1 choice
[ 26.977468] usb 5-7.3: new low speed USB device using ehci_hcd and address 4
[ 27.088491] usb 5-7.3: configuration #1 chosen from 1 choice
[ 27.288923] usb 5-7.4: new high speed USB device using ehci_hcd and address 5
[ 27.391969] usb 5-7.4: configuration #1 chosen from 1 choice
[ 27.392888] usbcore: registered new interface driver hiddev
[ 27.406897] input: Microsoft Microsoft Wireless Optical Desktop� 2.10 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input1
[ 27.428430] input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop� 2.10] on usb-0000:00:1d.2-1
[ 27.562562] input: Microsoft Microsoft Wireless Optical Desktop� 2.10 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.1/input/input2
[ 27.588150] input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop� 2.10] on usb-0000:00:1d.2-1
[ 27.595241] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.7/usb5/5-7/5-7.3/5-7.3:1.0/input/input3
[ 27.604128] input,hidraw2: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.7-7.3
[ 27.614757] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.7/usb5/5-7/5-7.3/5-7.3:1.1/input/input4
[ 27.628087] input,hidraw3: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.7-7.3
[ 27.628104] usbcore: registered new interface driver usbhid
[ 27.628107] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 27.628847] usbcore: registered new interface driver libusual
[ 27.640483] Initializing USB Mass Storage driver...
[ 27.640550] scsi4 : SCSI emulation for USB Mass Storage devices
[ 27.640607] usbcore: registered new interface driver usb-storage
[ 27.640610] USB Mass Storage support registered.
[ 27.640689] usb-storage: device found at 5
[ 27.640690] usb-storage: waiting for device to settle before scanning
[ 27.753059] kjournald starting. Commit interval 5 seconds
[ 27.753078] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.667049] usb-storage: device scan complete
[ 32.671265] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9407 PQ: 0 ANSI: 0
[ 32.715588] Linux agpgart interface v0.102
[ 32.749822] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.753546] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.762668] sd 4:0:0:0: [sdc] 7864320 512-byte hardware sectors (4027 MB)
[ 32.763915] sd 4:0:0:0: [sdc] Write Protect is off
[ 32.763918] sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 32.763920] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 32.766407] sd 4:0:0:0: [sdc] 7864320 512-byte hardware sectors (4027 MB)
[ 32.767656] sd 4:0:0:0: [sdc] Write Protect is off
[ 32.767658] sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 32.767660] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 32.767663] sdc: sdc1
[ 32.768621] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 32.768685] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 32.906829] intel_rng: FWH not detected
[ 33.050663] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 33.083929] input: Power Button (FF) as /devices/virtual/input/input6
[ 33.106467] ACPI: Power Button (FF) [PWRF]
[ 33.106535] input: Power Button (CM) as /devices/virtual/input/input7
[ 33.138414] ACPI: Power Button (CM) [PWRB]
[ 33.218309] iTCO_vendor_support: vendor-support=0
[ 33.226731] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 33.226808] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 33.226839] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 33.602883] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 33.610532] phy0: Selected rate control algorithm 'simple'
[ 33.691811] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 33.691834] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 34.242764] parport_pc 00:08: reported by Plug and Play ACPI
[ 34.242809] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 35.207408] lp0: using parport0 (interrupt-driven).
[ 35.784590] EXT3 FS on sdb2, internal journal
[ 36.849783] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.231744] No dock devices found.
[ 38.061683] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 38.061687] apm: disabled - APM is not SMP safe.
[ 38.177342] ppdev: user-space parallel port driver
[ 38.250931] audit(1241639525.118:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5132 profile="/usr/sbin/cupsd" namespace="default"
[ 39.493268] Bluetooth: Core ver 2.11
[ 39.493360] NET: Registered protocol family 31
[ 39.493363] Bluetooth: HCI device and connection manager initialized
[ 39.493367] Bluetooth: HCI socket layer initialized
[ 39.506900] Bluetooth: L2CAP ver 2.9
[ 39.506905] Bluetooth: L2CAP socket layer initialized
[ 39.526951] r8169: eth0: link up
[ 39.526959] r8169: eth0: link up
[ 39.546677] Bluetooth: RFCOMM socket layer initialized
[ 39.546690] Bluetooth: RFCOMM TTY layer initialized
[ 39.546692] Bluetooth: RFCOMM ver 1.8
[ 41.406725] [drm] Initialized drm 1.1.0 20060810
[ 42.626453] NET: Registered protocol family 17
[ 48.472785] NET: Registered protocol family 10
[ 48.473064] lo: Disabled Privacy Extensions
[ 48.474017] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 58.765671] eth0: no IPv6 routers present
[ 74.342202] UDF-fs: No VRS found
[ 74.459144] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 74.460775] ISO 9660 Extensions: RRIP_1991A



Κώδικας: Επιλογή όλων
lsmod


Module Size Used by
nls_iso8859_1 4992 1
nls_cp437 6656 1
vfat 14464 1
fat 54556 1 vfat
isofs 36388 1
udf 88740 0
ipv6 267908 10
af_packet 23812 2
radeon 124192 0
drm 82452 1 radeon
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61028 4 rfcomm,l2cap
ppdev 10372 0
acpi_cpufreq 10796 0
cpufreq_stats 7104 0
cpufreq_userspace 5284 0
cpufreq_ondemand 9740 2
freq_table 5536 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 2688 0
cpufreq_conservative 8712 0
sbs 15112 0
container 5632 0
dock 11280 0
sbshc 7680 1 sbs
video 19856 0
output 4736 1 video
battery 14212 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
ac 6916 0
lp 12324 0
joydev 13120 0
parport_pc 36260 1
parport 37832 3 ppdev,lp,parport_pc
evdev 13056 6
arc4 2944 2
ecb 4480 2
blkcipher 8324 1 ecb
snd_hda_intel 346136 3
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss
rt61pci 25472 0
rt2x00pci 11264 1 rt61pci
rt2x00lib 22528 2 rt61pci,rt2x00pci
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
snd_hwdep 10500 1 snd_hda_intel
rfkill 8596 1 rt2x00lib
input_polldev 5896 1 rt2x00lib
crc_itu_t 3072 1 rt2x00lib
snd_seq_dummy 4868 0
mac80211 165652 3 rt61pci,rt2x00pci,rt2x00lib
snd_seq_oss 35584 0
cfg80211 15112 1 mac80211
snd_seq_midi 9376 0
eeprom_93cx6 3200 1 rt61pci
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
button 9232 0
pcspkr 4224 0
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
intel_agp 25492 0
snd 56996 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
shpchp 34452 0
pci_hotplug 30880 1 shpchp
agpgart 34760 2 drm,intel_agp
soundcore 8800 1 snd
ext3 136840 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
usb_storage 73792 1
libusual 19236 1 usb_storage
usbhid 32128 0
hid 38784 1 usbhid
sg 36880 0
sd_mod 30720 4
sr_mod 17956 1
cdrom 37408 1 sr_mod
ata_piix 19588 2
pata_acpi 8320 0
ata_generic 8324 0
floppy 59588 0
libata 159600 3 ata_piix,pata_acpi,ata_generic
scsi_mod 151436 5 usb_storage,sg,sd_mod,sr_mod,libata
ehci_hcd 37900 0
r8169 34820 0
uhci_hcd 27024 0
usbcore 146412 6 usb_storage,libusual,usbhid,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36488 2 acpi_cpufreq,thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50708 3
giorgosk_80
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 04 Μάιος 2009, 19:29
Εκτύπωση

Re: Προβλημα με wireless και Ubuntu 8.04  Το θέμα επιλύθηκε

Δημοσίευσηαπό logari81 » 06 Μάιος 2009, 23:33

βασικα γραψε λάθος, τωρα προσεξα ότι έχεις 8.04 το οποιο εχει ακόμα τον παλιο driver rt61pci αντι του rt61. Ίσως σε βοηθήσει αυτό
https://help.ubuntu.com/community/WifiD ... RalinkRT61
ή πιο απλά να κανεις αναβάθμιση σε 8.10 ή 9.04

Το θεμα εχει ξανασυζητηθεί εδώ:
viewtopic.php?f=39&t=1171&p=11216&hilit=1814%3A0301#p10675
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Προβλημα με wireless και Ubuntu 8.04

Δημοσίευσηαπό giorgosk_80 » 08 Μάιος 2009, 11:04

Αναβαθμισα σε 8.10 και μετα σε 9.04. Τωρα ειμαι OK, δεν υπαρχει κανενα προβλημα με την ασυρματη καρτα.
giorgosk_80
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 04 Μάιος 2009, 19:29
Εκτύπωση

Re: Προβλημα με wireless και Ubuntu 8.04

Δημοσίευσηαπό logari81 » 08 Μάιος 2009, 11:10

μπορείς να τσεκαρεις το θέμα τότε ως επιλυμένο. Πάτησε το κουμπακι με το πρασινο "ν" στην απαντηση που σε βοήθησε.
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Προβλημα με wireless και Ubuntu 8.04

Δημοσίευσηαπό taratatzoum » 08 Μάιος 2009, 13:33

giorgosk_80 έγραψε:
έγραψε:
έγραψε:
Κώδικας: Επιλογή όλων
cat /etc/*release*

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.04
DISTRIB_CODENAME=hardy
DISTRIB_DESCRIPTION="Ubuntu 8.04"


έγραψε:
Κώδικας: Επιλογή όλων
uname -a

Linux giorgos-desktop 2.6.24-16-generic #1 SMP Thu Apr 10 13:23:42 UTC 2008 i686 GNU/Linux



Η εγκατσταση εγινε ως εξης: Bootαρα απο το Live CD, το αφησα να φορτωσει την επιφανεια εργασιας και εκανα την εγκατασταση μεσα απο το CD σε ενα partition που ειχα δημιουργησει σε δευτερο εσωτερικο σκληρο δισκο.

Δυστυχώς δεν είχα internet αυτές τις ημέρες, αλλά από ότι βλέπω βρέθηκε η λύση...ίσως αν έκανες ένα
Κώδικας: Επιλογή όλων
sudo apt-get update && sudo apt-get upgrade
με τις ενημερώσεις του πυρήνα να διορθώνονταν το πρόβλημα και στην 8.04
η εγκατάσταση που είχε κάνει ήταν πολύ πίσω και ήθελε αναβάθμιση στην 8.04.2
δες τα δικά μου αποτελέσματα εντελώς ενημερωτικά πια..:)
edit
Κώδικας: Επιλογή όλων
rizitis@dell-rizitis:~$ cat /etc/*release*
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.04
DISTRIB_CODENAME=hardy
DISTRIB_DESCRIPTION="Ubuntu 8.04.2"
rizitis@dell-rizitis:~$ uname -a
Linux dell-rizitis 2.6.24-24-rt #1 SMP PREEMPT RT Wed Apr 15 18:09:25 UTC 2009 i686 GNU/Linux

rizitis@dell-rizitis:~$

Ιστολόγιο
1 Γνώσεις → Linux: Προχωρημένος ┃ Προγραμματισμός: Μέτριος ┃ Αγγλικά: Προχωρημένος
2 Λειτουργικό → Slackware 13.37.0 64-bit (el_GR.utf-8)
3 Προδιαγραφές → CPU: 8x Intel Core i7 CPU Q 740 1.73GHz ‖ RAM 3894 MiB ‖ Dell Inc. - Dell Inc. Inspiron N5010
4 Κάρτες γραφικών: ATI Redwood [Radeon HD 5600 Series] ⎨1002:68c1⎬
5 Δίκτυα: wlan0: Broadcom BCM4313 802.11b/g/n Wireless LAN Controller ⎨14e4:4727⎬ ⋮ eth0: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller ⎨10ec:8136⎬
taratatzoum
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 849
Εγγραφή: 10 Μάιος 2008, 20:29
Τοποθεσία: Χανιά
Launchpad: rizitis
IRC: rizitis or rtz
Εκτύπωση

Προηγούμενη

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet