No wifi & bt

[Lefteris_]

Γειά σας παιδιά και καλώς σας βρήκα. Είμαι νέος στο χώρο του linux και για να κάνω τη μετάβαση μου σταδιακή αποφάσισα να τα βάλω πρώτα σε ένα "παλιό" νοτεμπουκ που έχω turbo x αλλά δυστυχώς αντιμετωπίζω προβλήματα με το wifi και το bt δε θέλουν να συνδεθούν με τίποτα. Έχω την εντύπωση πως ούτε κάρτα γραφικών αναγνωρίζει. Καμία ιδέα του τι μπορώ να κάνω? Ελπίζω η περαιτέρω επαφή μου με το λειτουργικό να μην είναι απογοητευτική όπως το πρώτο ξεκίνημα μου μαζί του. (Στο ιντερνετ μπορώ να συνδεθώ μόνο μέσω καλωδίου)

[simosx]

Για δώσε μας τεχνικά χαρακτηριστικά του υπολογιστή. Αν έχει τουλάχιστον π.χ. 1GB RAM, τότε μπορείς να τρέξεις το LiveCD/LiveUSB του Ubuntu 12.04, και να φτιάξεις υπογραφή κατά viewtopic.php?f=6&t=15460
Από εκεί θα δούμε περισσότερα. Αν υπάρχει πρόβλημα με το ασύρματο, μπορείς με καλώδιο να έχεις για την αρχή σύνδεση στο διαδίκτυο για να στείλεις τα δεδομένα.

[simosx]

Για δώσε μας τεχνικά χαρακτηριστικά του υπολογιστή. Αν έχει τουλάχιστον π.χ. 1GB RAM, τότε μπορείς να τρέξεις το LiveCD/LiveUSB του Ubuntu 12.04, και να φτιάξεις υπογραφή κατά viewtopic.php?f=6&t=15460
Από εκεί θα δούμε περισσότερα. Αν υπάρχει πρόβλημα με το ασύρματο, μπορείς με καλώδιο να έχεις για την αρχή σύνδεση στο διαδίκτυο για να στείλεις την υπογραφή.

[eliasps]

Kαλησπέρα και καλώς όρισες στο forum!

Διάβασε τις οδηγίες προς νεοεισερχόμενους στο forum και αν θες, φτιάξε την υπογραφή σου με τα στοιχεία του συστήματός σου, προκειμένου να υπάρχουν περισσότερες πληροφορίες και να μπορεί κάποιος να προσφέρει βοήθεια πιο αποτελεσματικά. Για να φτιάξεις την υπογραφή σου, πάτα εδώ.

Στο θέμα σου τώρα, άνοιξε το τερματικό, γράφοντας "terminal" ή "τερματικό" στην αναζήτηση (ανάλογα την γλώσσα που είναι το λειτουργικό σου) και εκτέλεσε μία μία τις παρακάτω εντολές. Για κάθε μία από αυτές τις εντολές, κάνε αντιγραφή τα αποτελέσματά τους από το τερματικό και επικόλληση εδώ, ώστε να δούμε πληροφορίες.
1. Για την κάρτα δικτύου:

Κώδικας: Επιλογή όλων

sudo lshw -C network

Κώδικας: Επιλογή όλων

lspci -nn | grep 0280

Κώδικας: Επιλογή όλων

rfkill list

2. Και για το bluetooth, κάνε το ίδιο πράγμα με τις παρακάτω εντολές:

Κώδικας: Επιλογή όλων

hcitool dev

Κώδικας: Επιλογή όλων

lsusb

3. Τώρα για την κάρτα γραφικών, κάνεις πάλι το ίδιο με τις παρακάτω εντολές:

Κώδικας: Επιλογή όλων

lspci -nnk | grep -iA3 vga

Κώδικας: Επιλογή όλων

sudo lshw -C display

Βάλε τα αποτελέσματα των εντολών μέσα σε [cοde] αποτελέσματα [/code] για να εμφανιστούν έτσι και να είναι ευανάγνωστα:

Κώδικας: Επιλογή όλων

αποτελέσματα

Η εναλλακτικά, κάνε επικόλληση τα αποτελέσματα εδώ, επέλεξε το κείμενο με το ποντίκι και πάτα το 9ο στη σειρά κουμπάκι (αυτό με τα <>), ακριβώς από πάνω από την περιοχή που γράφεις το κείμενο.

Από τις εντολές που σου έδωσα, όσες έχουν μπροστά το "sudo", θα σου ζητήσουν κωδικό, όσο θα τον πληκτρολογείς θα φαίνεται σαν να μην πληκτρολογείται τίποτα, ενώ στην πραγματικότητα ο κωδικός πληκτρολογείται κανονικά, οπότε γράφ' τον και πάτα Enter.

[Lefteris_]

Κώδικας: Επιλογή όλων

sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:e0:4c:75:27:54
size: 100Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.1.71 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:41 ioport:2000(size=256) memory:d0100000-d0100fff memory:d0000000-d000ffff memory:d0020000-d003ffff
albert@Einstein:~$
albert@Einstein:~$
albert@Einstein:~$
albert@Einstein:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:e0:4c:75:27:54
size: 100Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.1.71 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:41 ioport:2000(size=256) memory:d0100000-d0100fff memory:d0000000-d000ffff memory:d0020000-d003ffff


Με τη 2η, 3η και 4η δε κάνει τίποτα.

Κώδικας: Επιλογή όλων

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 001 Device 003: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter

Κώδικας: Επιλογή όλων

~$ lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller [8086:27ae] (rev 03)
Subsystem: Intel Corporation Device [8086:1999]
Kernel driver in use: i915
Kernel modules: intelfb, i915


Κώδικας: Επιλογή όλων

*-display:0
description: VGA compatible controller
product: Mobile 945GSE Express Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff
*-display:1 UNCLAIMED
description: Display controller
product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=0
resources: memory:d0280000-d02fffff


Μήπως πιστεύετε ότι θα έπρεπε να είχα επιλέξει κάποια άλλη διανομή?

Παρακαλώ δώστε μου τα φώτα σας
Ευχαριστώ!

[eliasps]

Ο υπολογιστής δεν αναγνωρίζει ότι υπάρχει wireless adapter και bluetooth. Φαίνεται και από την υπογραφή σου ότι στο κομμάτι του network, έχει μόνο ethernet. To ίδιο δείχνει και το αποτέλεσμα της πρώτης εντολής.

Παρόλα αυτά, από την επιστροφή της εντολής lsusb, φαίνεται αυτό:

Κώδικας: Επιλογή όλων

Bus 001 Device 003: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter

Δηλαδή ότι υπάρχει συνδεδεμένος στον υπολογιστή wireless και bluetooth. Είναι ενσωματωμένα στον υπολογιστή; Ή τα έχεις συνδέσει ο ίδιος με USB (εξωτερικά);
Γιατί από μία αναζήτηση που έκανα για παλιά tourbo-x netbooks, είδα ότι σε πολλά, το wireless και το bluetooth είναι πρόσθετα.
Πες αν θες ποιό ακριβώς είναι το όνομα και το μοντέλο του υπολογιστή.

Όπως και να 'χει, για να δούμε επιπλέον λεπτομέρειες, εκτέλεσε στο τερματικό, την εντολή:

Κώδικας: Επιλογή όλων

sudo lsusb -v -d 05e1:0100 > lsusb.txt

Η παραπάνω εντολή δεν θα σου επιστρέψει κάποιο αποτέλεσμα, αλλά θα αποθηκεύσει το αποτέλεσμα σε ένα αρχείο κειμένου. Αυτό το αρχείο θα δημιουργηθεί στον προσωπικό σου φάκελο "Home" και θα έχει όνομα lsusb.txt. Βρες το λοιπόν, κάνε αντιγραφή το περιεχόμενό του και επικόλληση εδώ μέσα σε code.


Για την κάρτα γραφικών τώρα, αναγνωρίζεται κανονικά από τον υπολογιστή, και ο οδηγός που την χρησιμοποιεί ονομάζεται: i915. Τί σου έδωσε την εντύπωση πως δεν αναγνωρίζεται;
Επίσης, είδα αυτό:

Κώδικας: Επιλογή όλων

*-display:1 UNCLAIMED
description: Display controller
product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=0
resources: memory:d0280000-d02fffff

Nα σου πω την αλήθεια δεν είμαι σίγουρος για το τί σημαίνει, μπορεί να απαντήσει κάποιο άλλο μέλος σε αυτό.
Αυτό που υποθέτω είναι ότι έχει να κάνει με το VGA, την θύρα που χρησιμοποιεί ο υπολογιστής προκειμένου να τον συνδέσεις με εξωτερική οθόνη. Και το γεγονός ότι είναι Unclaimed (δεν χρησιμοποιείται από κάποιον οδηγό), έχει να κάνει με το ότι δεν υπάρχει δεύτερη οθόνη συνδεδεμένη με τον υπολογιστή, επομένως δεν υπάρχει και φορτωμένος οδηγός. Οπότε, σε αυτήν την περίπτωση, δεν σε επηρεάζει.
Αλλά όπως είπα, δεν είμαι σίγουρος για το αν όντως φταίει αυτό. Kάποιος που γνωρίζει ή ακόμα καλύτερα έχει Intel κάρτα, είναι καταλληλότερος να απαντήσει. Προτιμώ να μην προτείνω λύσεις τις οποίες δεν έχω δοκιμάσει ο ίδιος, ή δεν γνωρίζω τί κάνουν.

Off topic:
Έχεις βάλει τα αποτελέσματα σε quote, όχι σε code. Kάνε αν είναι εύκολο μία επεξεργασία στην δημοσίευσή σου, και βάλτα σε code.

[Learner]

Τον κώδικα τον βάζουμε μέσα σε [cοde]κώδικας[/cοde]. Επιλέγουμε το κείμενο και πατάμε το κουμπάκι .

Μερικά Laptop , έχουν την κάρτα δικτύου ενσωματωμένη αλλά συνδεδεμένη μέσω Usb Bus Controller και όχι pci. Μάλλον αυτό συμβαίνει κι εδώ.

Δώσε το αποτέλεσμα της εντολής που σου λέει ο eliasps . Το lsusb.txt

Σε ότι αφορά την κάρτα γραφικών και το UNCLAIMED , πρέπει να είναι αυτό που υπέθεσε και ο eliasps.

Δώσε και τα αποτελέσματα των

Κώδικας: Επιλογή όλων

iwconfig

και επίσης το dmesg. Εδώ πρόσεξε λίγο , γιατί το αποτέλεσμα θα είναι αρκετά μεγάλο.

Κώδικας: Επιλογή όλων

dmesg > dmesg.txt
gedit dmesg.txt

η δεύτερη εντολή θα ανοίξει τον κειμενογράφο με τα αποτελέσματα.
Κάνε αντιγραφή και επικόλληση τα αποτελέσματα εδώ. Πάντα ανάμεσα σε κώδικα

[eliasps]

Μερικά Laptop , έχουν την κάρτα δικτύου ενσωματωμένη αλλά συνδεδεμένη μέσω Usb Bus Controller και όχι pci. Μάλλον αυτό συμβαίνει κι εδώ.

Οπότε πιθανότητα να χρειαστεί να κατεβάσει και να εγκαταστήσει τον οδηγό χειροκίνητα, ώστε να λυθεί το πρόβλημα με το wireless και το bluetooth. Θα δείξει από τις επιστροφές των εντολών.
Ό,τι αποτελέσματα πήρα από την αναζήτηση που έκανα στη google για την εν λόγω συσκευή, ήταν στα γαλλικά και ο translator δεν βοήθησε και πολύ.

@Lefteris_
Ρώτησες πριν:

Μήπως πιστεύετε ότι θα έπρεπε να είχα επιλέξει κάποια άλλη διανομή?

Το Ubuntu προτείνεται σχεδόν από όλους ως η καλύτερη επιλογή linux διανομής για νέους χρήστες. Και αυτό γιατί είναι πιο φιλικό προς τον χρήστη, σου προσφέρει ευκολία στην χρήση και αποτελεσματικότητα στην εργασία. Ένα από τα + και ίσως το πιο σημαντικό, είναι ό,τι έχει απίστευτα μεγάλη και ενεργή κοινότητα που προσφέρει βοήθεια σε ότι πρόβλημα και αν έχεις.
Στην δική σου περίπτωση, που όπως ανέφερες, έκανες την εγκατάσταση σε παλιό μηχάνημα, παρατήρησες προβλήματα σε ταχύτητα ή γενικότερα κάποιο άλλο πρόβλημα εκτός αυτών του θέματος;
Αν όχι, τότε η 12.04 είναι η καταλληλότερη διανομή για να ενταχθείς στον κόσμο του linux.

[Lefteris_]

Κώδικας: Επιλογή όλων

sudo lsusb -v -d 05e1:0100 > lsusb.txt

Bus 001 Device 003: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05e1 Syntek Semiconductor Co., Ltd
idProduct 0x0100 802.11g + Bluetooth Wireless Adapter
bcdDevice 0.02
iManufacturer 1 Syntek Semi Co..
iProduct 2 WiFi USB Dongle
iSerial 3 Manufacture
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 97
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)


Κώδικας: Επιλογή όλων

iwconfig
lo no wireless extensions.

eth0 no wireless extensions.


Κώδικας: Επιλογή όλων

dmesg > dmesg.txt
gedit dmesg.txt

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-29-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 (Ubuntu 3.2.0-29.46-generic-pae 3.2.24)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Intel Corporation Calistoga & ICH7M Chipset/CAPELL VALLEY(NAPA) CRB, BIOS NAPA0001.86C.0059.D.0908281057 08/28/09
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 1015M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [c00f70f0] f70f0
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1e3f000-2000000
[ 0.000000] RAMDISK: 364f4000 - 37272000
[ 0.000000] ACPI: RSDP 000f70c0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3f68a2b8 0007C (v01 ?yA?\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 3f690da0 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 3f68ba9a 05292 (v02 INTEL CALISTGA 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 3f691fc0 00040
[ 0.000000] ACPI: APIC 3f690e94 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 3f690efc 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f690f34 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 3f690f70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f690fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 3f68b44b 0064F (v01 SataRe SataPri 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f68adaf 0069C (v01 SataRe SataSec 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f68a8d2 0021F (v02 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f68a86c 00066 (v02 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f68a334 00538 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 122MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0003f680
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f680
[ 0.000000] On node 0 totalpages: 259599
[ 0.000000] free_area_init_node: node 0, pgdat c1866a40, node_mem_map f740d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 246 pages used for memmap
[ 0.000000] HighMem zone: 31116 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f73eb000 s34240 r0 d23104 u57344
[ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257569
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic-pae root=UUID=09922764-401d-4607-ad0a-d46a5c6224eb ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4155136 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003f680)
[ 0.000000] Memory: 999372k/1038848k available (5814k kernel code, 39024k reserved, 2841k data, 740k init, 125448k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1875000 - 0xc192e000 ( 740 kB)
[ 0.000000] .data : 0xc15adb64 - 0xc1874240 (2841 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15adb64 (5814 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.286 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.57 BogoMIPS (lpj=6649144)
[ 0.004016] pid_max: default: 32768 minimum: 301
[ 0.004072] Security Framework initialized
[ 0.004113] AppArmor: AppArmor initialized
[ 0.004118] Yama: becoming mindful.
[ 0.004245] Mount-cache hash table entries: 512
[ 0.004521] Initializing cgroup subsys cpuacct
[ 0.004536] Initializing cgroup subsys memory
[ 0.004555] Initializing cgroup subsys devices
[ 0.004561] Initializing cgroup subsys freezer
[ 0.004567] Initializing cgroup subsys blkio
[ 0.004583] Initializing cgroup subsys perf_event
[ 0.004629] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.004635] Disabled fast string operations
[ 0.004644] CPU: Physical Processor ID: 0
[ 0.004648] CPU: Processor Core ID: 0
[ 0.004655] mce: CPU supports 5 MCE banks
[ 0.004669] CPU0: Thermal monitoring enabled (TM2)
[ 0.004678] using mwait in idle threads.
[ 0.010357] ACPI: Core revision 20110623
[ 0.020029] ftrace: allocating 26545 entries in 52 pages
[ 0.024109] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028381] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068086] CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.072003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.072003] ... version: 3
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] CPU 1 irqstacks, hard=f5cea000 soft=f5cec000
[ 0.072003] Booting Node 0, Processors #1 Ok.
[ 0.072003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.008000] Disabled fast string operations
[ 0.160076] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160164] Brought up 2 CPUs
[ 0.160172] Total of 2 processors activated (6649.09 BogoMIPS).
[ 0.160771] devtmpfs: initialized
[ 0.160771] EVM: security.selinux
[ 0.160771] EVM: security.SMACK64
[ 0.160771] EVM: security.capability
[ 0.160771] PM: Registering ACPI NVS region at 3f680000 (524288 bytes)
[ 0.164676] print_constraints: dummy:
[ 0.164737] RTC time: 9:24:31, date: 09/10/12
[ 0.164831] NET: Registered protocol family 16
[ 0.165047] Trying to unpack rootfs image as initramfs...
[ 0.165335] EISA bus registered
[ 0.165384] ACPI: bus type pci registered
[ 0.165609] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.165622] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.165629] PCI: Using MMCONFIG for extended config space
[ 0.165635] PCI: Using configuration type 1 for base access
[ 0.180191] bio: create slab <bio-0> at 0
[ 0.180586] ACPI: Added _OSI(Module Device)
[ 0.180595] ACPI: Added _OSI(Processor Device)
[ 0.180603] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180611] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183742] ACPI: EC: Look up EC in DSDT
[ 0.190495] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.191997] ACPI: SSDT 3f68aaf1 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.192837] ACPI: Dynamic OEM Table Load:
[ 0.192849] ACPI: SSDT (null) 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.193817] ACPI: SSDT 3f68ace7 000C8 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.194615] ACPI: Dynamic OEM Table Load:
[ 0.194627] ACPI: SSDT (null) 000C8 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.195469] ACPI: Interpreter enabled
[ 0.195494] ACPI: (supports S0 S3 S4 S5)
[ 0.195558] ACPI: Using IOAPIC for interrupt routing
[ 0.198187] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.198187] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.213835] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.214394] ACPI: No dock devices found.
[ 0.214404] HEST: Table not found.
[ 0.214418] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.215505] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.217645] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.217658] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.217668] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.217679] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.217689] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.217699] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.217709] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.217720] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[ 0.217764] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.217855] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.217878] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff]
[ 0.217893] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.217908] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.217923] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff]
[ 0.217997] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.218017] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff]
[ 0.218172] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.218208] pci 0000:00:1b.0: reg 10: [mem 0xd0540000-0xd0543fff 64bit]
[ 0.218347] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.218360] pci 0000:00:1b.0: PME# disabled
[ 0.218411] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.218564] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.218577] pci 0000:00:1c.0: PME# disabled
[ 0.218638] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.218716] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.218785] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.218862] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.218932] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.219009] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.219078] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.219154] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.219239] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.219276] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff]
[ 0.219417] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.219431] pci 0000:00:1d.7: PME# disabled
[ 0.219478] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.219613] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.219745] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.219759] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.219771] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 000f)
[ 0.219782] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.219869] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.219898] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.219919] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.219940] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.219961] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.219982] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.220072] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.220105] pci 0000:00:1f.2: reg 10: [io 0x18d0-0x18d7]
[ 0.220126] pci 0000:00:1f.2: reg 14: [io 0x18c4-0x18c7]
[ 0.220146] pci 0000:00:1f.2: reg 18: [io 0x18c8-0x18cf]
[ 0.220166] pci 0000:00:1f.2: reg 1c: [io 0x18c0-0x18c3]
[ 0.220187] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.220208] pci 0000:00:1f.2: reg 24: [mem 0xd0544400-0xd05447ff]
[ 0.220272] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.220283] pci 0000:00:1f.2: PME# disabled
[ 0.220325] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.220413] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.220599] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.220635] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.220686] pci 0000:02:00.0: reg 18: [mem 0xd0100000-0xd0100fff 64bit]
[ 0.220721] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.220746] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.220857] pci 0000:02:00.0: supports D1 D2
[ 0.220865] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220878] pci 0000:02:00.0: PME# disabled
[ 0.228089] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.228106] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.228119] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.228136] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.228269] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.228297] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.228307] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.228317] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.228327] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.228337] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.228347] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.228357] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.228367] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.228396] pci_bus 0000:00: on NUMA node 0
[ 0.228413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.228961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.229235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.229945] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.229958] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.229966] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.245256] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.245454] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.245633] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.245810] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.245988] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.246176] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.246363] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.246540] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.247165] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.247165] vgaarb: loaded
[ 0.247165] vgaarb: bridge control possible 0000:00:02.0
[ 0.247165] i2c-core: driver [aat2870] using legacy suspend method
[ 0.247165] i2c-core: driver [aat2870] using legacy resume method
[ 0.247165] SCSI subsystem initialized
[ 0.248176] libata version 3.00 loaded.
[ 0.248402] usbcore: registered new interface driver usbfs
[ 0.248455] usbcore: registered new interface driver hub
[ 0.248578] usbcore: registered new device driver usb
[ 0.248978] PCI: Using ACPI for IRQ routing
[ 0.261862] PCI: pci_cache_line_size set to 64 bytes
[ 0.262014] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.262025] reserve RAM buffer: 000000003f680000 - 000000003fffffff
[ 0.262435] NetLabel: Initializing
[ 0.262443] NetLabel: domain hash size = 128
[ 0.262448] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.262487] NetLabel: unlabeled traffic allowed by default
[ 0.262715] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.262731] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.262746] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.272221] Switching to clocksource hpet
[ 0.297520] AppArmor: AppArmor Filesystem Enabled
[ 0.297611] pnp: PnP ACPI init
[ 0.297663] ACPI: bus type pnp registered
[ 0.313177] pnp 00:00: [bus 00-ff]
[ 0.313189] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.313198] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.313207] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.313216] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.313224] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.313233] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.313242] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.313251] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.313259] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.313268] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.313277] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.313286] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.313294] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.313303] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.313312] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.313321] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.313330] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.313339] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.313348] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.313555] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.313659] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.313668] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.313676] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.313684] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.313693] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.313701] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.313709] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.313717] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.313878] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.313890] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.313900] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.313910] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.313921] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.313931] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.313941] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.313952] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.313963] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.314623] pnp 00:02: [io 0x0000-0x001f]
[ 0.314633] pnp 00:02: [io 0x0081-0x0091]
[ 0.314641] pnp 00:02: [io 0x0093-0x009f]
[ 0.314649] pnp 00:02: [io 0x00c0-0x00df]
[ 0.314657] pnp 00:02: [dma 4]
[ 0.314812] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.314848] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.314981] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.315205] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.315413] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.315428] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.315479] pnp 00:05: [io 0x00f0]
[ 0.315504] pnp 00:05: [irq 13]
[ 0.315650] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.315694] pnp 00:06: [io 0x002e-0x002f]
[ 0.315702] pnp 00:06: [io 0x0061]
[ 0.315709] pnp 00:06: [io 0x0063]
[ 0.315716] pnp 00:06: [io 0x0065]
[ 0.315723] pnp 00:06: [io 0x0067]
[ 0.315730] pnp 00:06: [io 0x0070]
[ 0.315737] pnp 00:06: [io 0x0080]
[ 0.315744] pnp 00:06: [io 0x0092]
[ 0.315751] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.315759] pnp 00:06: [io 0x0680-0x069f]
[ 0.315767] pnp 00:06: [io 0x0800-0x080f]
[ 0.315774] pnp 00:06: [io 0x1000-0x107f]
[ 0.315788] pnp 00:06: [io 0x1180-0x11bf]
[ 0.315795] pnp 00:06: [io 0x1640-0x164f]
[ 0.316063] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.316075] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.316085] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.316095] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.316105] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.316117] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.316225] pnp 00:07: [io 0x06a0-0x06af]
[ 0.316234] pnp 00:07: [io 0x06b0-0x06ff]
[ 0.316415] system 00:07: [io 0x06a0-0x06af] has been reserved
[ 0.316426] system 00:07: [io 0x06b0-0x06ff] has been reserved
[ 0.316437] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.316474] pnp 00:08: [io 0x0070-0x0077]
[ 0.316494] pnp 00:08: [irq 8]
[ 0.316638] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.316742] pnp 00:09: [io 0x0060]
[ 0.316750] pnp 00:09: [io 0x0064]
[ 0.316771] pnp 00:09: [irq 1]
[ 0.316946] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.316994] pnp 00:0a: [irq 12]
[ 0.317137] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.317229] pnp: PnP ACPI: found 11 devices
[ 0.317236] ACPI: ACPI bus type pnp unregistered
[ 0.317246] PnPBIOS: Disabled by ACPI PNP
[ 0.359590] PCI: max bus depth: 1 pci_try_num: 2
[ 0.359653] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[ 0.359665] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.359676] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.359690] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.359704] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.359720] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.359789] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.359804] pci 0000:00:1c.0: setting latency timer to 64
[ 0.359822] pci 0000:00:1e.0: setting latency timer to 64
[ 0.359834] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.359843] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.359852] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.359862] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.359871] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.359880] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.359889] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.359898] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff]
[ 0.359908] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.359917] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.359926] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.359937] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.359945] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.359954] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.359963] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.359973] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.359983] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.359991] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.360000] pci_bus 0000:03: resource 11 [mem 0x40000000-0xfebfffff]
[ 0.360173] NET: Registered protocol family 2
[ 0.360377] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.361243] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.362391] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.362924] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.362933] TCP reno registered
[ 0.362947] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.362972] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.363294] NET: Registered protocol family 1
[ 0.363352] pci 0000:00:02.0: Boot video device
[ 0.363424] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.363456] pci 0000:00:1d.0: PCI INT A disabled
[ 0.363491] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.363520] pci 0000:00:1d.1: PCI INT B disabled
[ 0.363553] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.363582] pci 0000:00:1d.2: PCI INT C disabled
[ 0.363616] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.363644] pci 0000:00:1d.3: PCI INT D disabled
[ 0.363668] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.363726] pci 0000:00:1d.7: PCI INT A disabled
[ 0.363767] PCI: CLS 64 bytes, default 64
[ 0.363781] Simple Boot Flag at 0x36 set to 0x1
[ 0.365030] audit: initializing netlink socket (disabled)
[ 0.365061] type=2000 audit(1347269071.360:1): initialized
[ 0.427729] highmem bounce pool size: 64 pages
[ 0.427748] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.434685] VFS: Disk quotas dquot_6.5.2
[ 0.434895] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.437039] fuse init (API version 7.17)
[ 0.437424] msgmni has been set to 1706
[ 0.438679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.438786] io scheduler noop registered
[ 0.438794] io scheduler deadline registered
[ 0.438819] io scheduler cfq registered (default)
[ 0.439183] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.439280] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.439563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.439671] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.439935] intel_idle: MWAIT substates: 0x20220
[ 0.439956] intel_idle: v0.4 model 0x1C
[ 0.439961] intel_idle: lapic_timer_reliable_states 0x2
[ 0.439969] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.456126] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.472183] ACPI: AC Adapter [AC0] (on-line)
[ 0.472501] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.488204] ACPI: Lid Switch [LID0]
[ 0.488416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.488433] ACPI: Power Button [PWRB]
[ 0.488593] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.488607] ACPI: Sleep Button [SLPB]
[ 0.488804] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.488817] ACPI: Power Button [PWRF]
[ 0.568209] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.568219] ACPI: Thermal Zone [THZN] (45 C)
[ 0.568319] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.568351] ACPI: Battery Slot [BAT0] (battery present)
[ 0.568479] ERST: Table is not found!
[ 0.568485] GHES: HEST is not enabled!
[ 0.568862] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.569667] isapnp: Scanning for PnP cards...
[ 0.924544] isapnp: No Plug & Play device found
[ 0.940724] Freeing initrd memory: 13816k freed
[ 1.149273] Linux agpgart interface v0.103
[ 1.149429] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.149602] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.149775] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.150019] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.154272] brd: module loaded
[ 1.156573] loop: module loaded
[ 1.157038] ata_piix 0000:00:1f.1: version 2.13
[ 1.157070] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.157137] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.157926] scsi0 : ata_piix
[ 1.158153] scsi1 : ata_piix
[ 1.158979] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.158987] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.159068] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.159083] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.159232] ata2: port disabled--ignoring
[ 1.312105] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.313015] scsi2 : ata_piix
[ 1.313243] scsi3 : ata_piix
[ 1.315000] ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 19
[ 1.315010] ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 19
[ 1.316610] Fixed MDIO Bus: probed
[ 1.316699] tun: Universal TUN/TAP device driver, 1.6
[ 1.316706] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.324212] PPP generic driver version 2.4.2
[ 1.324509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.324562] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.324603] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.324612] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.324746] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.324785] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.324804] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.328695] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.328736] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[ 1.344045] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.344382] hub 1-0:1.0: USB hub found
[ 1.344395] hub 1-0:1.0: 8 ports detected
[ 1.344583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.344623] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.344681] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.344699] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.344707] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.344846] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.344890] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.345231] hub 2-0:1.0: USB hub found
[ 1.345243] hub 2-0:1.0: 2 ports detected
[ 1.345387] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.345404] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.345412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.345547] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.345589] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.345937] hub 3-0:1.0: USB hub found
[ 1.345950] hub 3-0:1.0: 2 ports detected
[ 1.346096] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.346112] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.346120] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.346247] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.346309] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.346657] hub 4-0:1.0: USB hub found
[ 1.346669] hub 4-0:1.0: 2 ports detected
[ 1.346817] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.346834] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.346842] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.346981] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.347041] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.347382] hub 5-0:1.0: USB hub found
[ 1.347394] hub 5-0:1.0: 2 ports detected
[ 1.347685] usbcore: registered new interface driver libusual
[ 1.347799] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.365020] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.365037] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.365443] mousedev: PS/2 mouse device common for all mice
[ 1.366056] rtc_cmos 00:08: RTC can wake from S4
[ 1.366293] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.366341] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.366480] device-mapper: uevent: version 1.0.3
[ 1.366689] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.366794] EISA: Probing bus 0 at eisa.0
[ 1.366801] EISA: Cannot allocate resource for mainboard
[ 1.366807] Cannot allocate resource for EISA slot 1
[ 1.366813] Cannot allocate resource for EISA slot 2
[ 1.366818] Cannot allocate resource for EISA slot 3
[ 1.366824] Cannot allocate resource for EISA slot 4
[ 1.366829] Cannot allocate resource for EISA slot 5
[ 1.366835] Cannot allocate resource for EISA slot 6
[ 1.366840] Cannot allocate resource for EISA slot 7
[ 1.366846] Cannot allocate resource for EISA slot 8
[ 1.366850] EISA: Detected 0 cards.
[ 1.366869] cpufreq-nforce2: No nForce2 chipset.
[ 1.367048] cpuidle: using governor ladder
[ 1.367341] cpuidle: using governor menu
[ 1.367347] EFI Variables Facility v0.08 2004-May-17
[ 1.367902] TCP cubic registered
[ 1.368252] NET: Registered protocol family 10
[ 1.369526] NET: Registered protocol family 17
[ 1.369551] Registering the dns_resolver key type
[ 1.369603] Using IPI No-Shortcut mode
[ 1.370034] PM: Hibernation image not present or could not be loaded.
[ 1.370062] registered taskstats version 1
[ 1.380430] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.388578] Magic number: 12:97:424
[ 1.388752] rtc_cmos 00:08: setting system clock to 2012-09-10 09:24:33 UTC (1347269073)
[ 1.389545] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.389551] EDD information not available.
[ 1.529753] ata3.00: ATA-8: ST9160314AS, 0001SDM1, max UDMA/133
[ 1.529762] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.544717] ata3.00: configured for UDMA/133
[ 1.545075] scsi 2:0:0:0: Direct-Access ATA ST9160314AS 0001 PQ: 0 ANSI: 5
[ 1.545446] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.545605] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.545740] sd 2:0:0:0: [sda] Write Protect is off
[ 1.545751] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.545863] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.588878] sda: sda1 sda2 < sda5 >
[ 1.590003] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.590131] Freeing unused kernel memory: 740k freed
[ 1.590879] Write protecting the kernel text: 5816k
[ 1.591015] Write protecting the kernel read-only data: 2376k
[ 1.591021] NX-protecting the kernel data: 4424k
[ 1.635686] udevd[90]: starting version 175
[ 1.656162] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[ 1.929700] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.929768] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.929838] r8169 0000:02:00.0: setting latency timer to 64
[ 1.929954] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 1.931653] r8169 0000:02:00.0: eth0: RTL8102e at 0xf841e000, 00:e0:4c:75:27:54, XID 14a00000 IRQ 41
[ 2.024141] usb 1-6: new high-speed USB device number 3 using ehci_hcd
[ 2.257563] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.492257] ACPI: Battery Slot [BAT0] (battery present)
[ 14.110727] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.153184] udevd[306]: starting version 175
[ 14.188259] Adding 1037308k swap on /dev/sda5. Priority:-1 extents:1 across:1037308k
[ 14.286185] lp: driver loaded but no devices found
[ 14.455319] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 14.456672] acpi device:05: registered as cooling_device2
[ 14.457128] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 14.457530] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 14.527293] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.031201] Bluetooth: Core ver 2.16
[ 15.031266] NET: Registered protocol family 31
[ 15.031274] Bluetooth: HCI device and connection manager initialized
[ 15.031283] Bluetooth: HCI socket layer initialized
[ 15.031291] Bluetooth: L2CAP socket layer initialized
[ 15.031310] Bluetooth: SCO socket layer initialized
[ 15.066712] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.066722] Bluetooth: BNEP filters: protocol multicast
[ 15.091183] Bluetooth: RFCOMM TTY layer initialized
[ 15.091200] Bluetooth: RFCOMM socket layer initialized
[ 15.091207] Bluetooth: RFCOMM ver 1.11
[ 15.095979] ppdev: user-space parallel port driver
[ 15.314580] type=1400 audit(1347258287.421:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=555 comm="apparmor_parser"
[ 15.316361] type=1400 audit(1347258287.425:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=555 comm="apparmor_parser"
[ 15.375038] [drm] Initialized drm 1.1.0 20060810
[ 15.386061] input: Topstar Laptop extra buttons as /devices/virtual/input/input6
[ 15.386430] topstar_laptop: ACPI extras driver loaded
[ 15.439863] type=1400 audit(1347258287.545:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=573 comm="apparmor_parser"
[ 15.443516] intel_rng: FWH not detected
[ 15.445011] type=1400 audit(1347258287.553:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser"
[ 15.445863] type=1400 audit(1347258287.553:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser"
[ 15.473724] leds_ss4200: no LED devices found
[ 15.545965] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.545982] i915 0000:00:02.0: setting latency timer to 64
[ 15.626255] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 15.626265] [drm] Driver supports precise vblank timestamp query.
[ 15.663992] Linux video capture interface: v2.00
[ 15.666446] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 15.691364] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
[ 15.691741] usbcore: registered new interface driver uvcvideo
[ 15.691750] USB Video Class driver (1.1.1)
[ 15.706986] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 16.029140] [drm] initialized overlay support
[ 16.219843] psmouse serio1: sentelic: Finger Sensing Pad, hw: 12.0.1, sw: 1.0.0-K
[ 16.303871] fbcon: inteldrmfb (fb0) is primary device
[ 16.308295] Console: switching to colour frame buffer device 128x37
[ 16.308379] fb0: inteldrmfb frame buffer device
[ 16.308386] drm: registered panic notifier
[ 16.308464] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.308636] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.308775] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 16.308842] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 16.400806] hda_codec: ALC662 rev1: SKU not ready 0x598301f0
[ 16.412429] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 16.425777] init: failsafe main process (676) killed by TERM signal
[ 16.436563] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 16.863964] type=1400 audit(1347258288.969:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=796 comm="apparmor_parser"
[ 16.867558] type=1400 audit(1347258288.973:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=795 comm="apparmor_parser"
[ 16.878504] type=1400 audit(1347258288.985:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=796 comm="apparmor_parser"
[ 16.879344] type=1400 audit(1347258288.985:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=796 comm="apparmor_parser"
[ 16.905377] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input10
[ 16.963502] type=1400 audit(1347258289.069:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=804 comm="apparmor_parser"
[ 17.015853] r8169 0000:02:00.0: eth0: link down
[ 17.015882] r8169 0000:02:00.0: eth0: link down
[ 17.020833] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.024425] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.594430] r8169 0000:02:00.0: eth0: link up
[ 18.595134] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.488081] eth0: no IPv6 routers present
[ 39.741538] audit_printk_skb: 36 callbacks suppressed
[ 39.741550] type=1400 audit(1347258311.849:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1627 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

[Lefteris_]

Όσο για την κάρτα γραφικών το είπα γιατί παρατήρησα ότι κάτι gif από σελίδες τα έδειχνε λίγο να πηγαίνουν σε slow motion . Κατά άλλα δε ξέρω πόσο γρήγορα πρέπει να φορτώνουν το linux πάντως παρατηρώ μια μικροκαθυστέρηση από τη στιγμή που θα πατήσω κάτι να ανοίξει από τη μπάρα μέχρι να ανοίξει. Πραγματικά ανυπομονώ να βρω χρόνο να πειραματιστώ με το λειτουργικό. Αν πιστεύετε ότι το μηχάνημα μου δε τραβά τη τελευταία έκδοση αν θέλετε προτείνετε μου μια σταθερή που θα μπορούσε να τρέξει απροβλημάτιστα ώστε μη χρειαστεί τη στιγμή που θα έχω αρχίσει να τη συνηθίζω να αναγκαστώ να την αλλάξω.