Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000  Το θέμα επιλύθηκε

...κάρτες δικτύου, modems, προβλήματα internet
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα των εντολών στο τερματικό :
lspci -nn
lsusb
rfkill list

Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Uparis » 07 Σεπ 2013, 20:11

Έκανα εγκατάσταση το ubuntu 12.04.3 στο λαπτοπ της υπογραφής όλα δουλέψαν καλά εκτός από την ασύρματη καρτα θα 'θελα πολλη να βοηθήσετε να το λύσω αυτο το πρόβλημα με καλώδιο συνδεετε το λαπτοπ στο ιντερνετ.Ευχαριστω εκ τον προτέρων
1 Γνώσεις Linux: Καθόλου ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 12.04 precise 3.8.0-30-generic 32bit (el_GR.UTF-8, Unity ubuntu-2d), Ubuntu 3.8.0-29-generic
3 Intel Celeron CPU 2.80GHz ‖ RAM 1192 MiB ‖ Hewlett-Packard 089C - Hewlett-Packard Pavilion zv5000 (PB866EA#B1A)
4 Advanced Micro Devices, Inc. [AMD/ATI] RS300M [Mobility Radeon 9100 IGP] [1002:5835] {radeon}
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Uparis
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 07 Σεπ 2013, 19:38
Εκτύπωση

Re: Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Uparis » 07 Σεπ 2013, 20:13

Κώδικας: Επιλογή όλων
Pavilion-zv5000-PB866EA-B1A:~$ lspci -nn
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RS300 Host Bridge [1002:5833] (rev 02)
00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS300 AGP Bridge [1002:5838]
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] OHCI USB Controller #1 [1002:4347] (rev 01)
00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] OHCI USB Controller #2 [1002:4348] (rev 01)
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SMBus [1002:4353] (rev 16)
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] Dual Channel Bus Master PCI IDE Controller [1002:4349]
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:434c]
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] IXP200 3COM 3C920B Ethernet Controller [1002:4342]
00:14.5 Multimedia audio controller [0401]: Advanced Micro Devices, Inc. [AMD/ATI] IXP150 AC'97 Audio Controller [1002:4341]
00:14.6 Modem [0703]: Advanced Micro Devices, Inc. [AMD/ATI] IXP AC'97 Modem [1002:434d] (rev 01)
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS300M [Mobility Radeon 9100 IGP] [1002:5835]
02:02.0 Network controller [0280]: Broadcom Corporation BCM4301 802.11b Wireless LAN Controller [14e4:4301] (rev 02)
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
02:04.0 CardBus bridge [0607]: Texas Instruments PCI1520 PC card Cardbus Controller [104c:ac55] (rev 01)
02:04.1 CardBus bridge [0607]: Texas Instruments PCI1520 PC card Cardbus Controller [104c:ac55] (rev 01)
02:07.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43)
02:07.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43)
02:07.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0] (rev 04)
paris@paris-Pavilion-zv5000-PB866EA-B1A:~$
1 Γνώσεις Linux: Καθόλου ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 12.04 precise 3.8.0-30-generic 32bit (el_GR.UTF-8, Unity ubuntu-2d), Ubuntu 3.8.0-29-generic
3 Intel Celeron CPU 2.80GHz ‖ RAM 1192 MiB ‖ Hewlett-Packard 089C - Hewlett-Packard Pavilion zv5000 (PB866EA#B1A)
4 Advanced Micro Devices, Inc. [AMD/ATI] RS300M [Mobility Radeon 9100 IGP] [1002:5835] {radeon}
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Uparis
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 07 Σεπ 2013, 19:38
Εκτύπωση

Re: Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Learner » 07 Σεπ 2013, 20:15

Αφού συνδέεσαι με καλώδιο και έχεις Internet , ακολούθησε αυτό και δώσε εδώ τα αποτελέσματα του netinfo.txt αρχείου.

Τα αποτελέσματα, τοποθέτησε τα μέσα σε BBCode tags. Κοίτα εδώ πως

About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Uparis » 07 Σεπ 2013, 20:23

Το έγγραφο netinfo.txt ειναι αυτο
Κώδικας: Επιλογή όλων

*************** info trace ****************



**** uname -a ****


Linux paris-Pavilion-zv5000-PB866EA-B1A 3.8.0-30-generic #44~precise1-Ubuntu SMP Fri Aug 23 17:33:45 UTC 2013 i686 i686 i386 GNU/Linux


**** lsb-release ****


DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS"


**** lspci ****


00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] IXP200 3COM 3C920B Ethernet Controller [1002:4342]
00:14.5 Multimedia audio controller [0401]: Advanced Micro Devices, Inc. [AMD/ATI] IXP150 AC'97 Audio Controller [1002:4341]
Subsystem: Hewlett-Packard Company Device [103c:006b]
--
02:02.0 Network controller [0280]: Broadcom Corporation BCM4301 802.11b Wireless LAN Controller [14e4:4301] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:12f3]
Kernel modules: ssb
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:006b]
Kernel driver in use: 8139too


**** lsusb ****


Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


**** iwconfig ****




**** rfkill ****




**** lsmod ****


Module Size Used by
bnep 17852 2
rfcomm 38400 0
bluetooth 211435 10 bnep,rfcomm
snd_atiixp_modem 18702 5
snd_atiixp 19415 2
snd_ac97_codec 110254 2 snd_atiixp_modem,snd_atiixp
radeon 892298 2
ac97_bus 12670 1 snd_ac97_codec
snd_pcm 85934 5 snd_atiixp_modem,snd_atiixp,snd_ac97_codec
snd_seq_midi 13132 0
snd_rawmidi 25157 1 snd_seq_midi
joydev 17329 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51593 2 snd_seq_midi,snd_seq_midi_event
ppdev 12849 0
snd_timer 28931 2 snd_pcm,snd_seq
ttm 72088 1 radeon
snd_seq_device 14137 3 snd_seq_midi,snd_rawmidi,snd_seq
drm_kms_helper 47749 1 radeon
drm 233935 4 radeon,ttm,drm_kms_helper
pcmcia 39854 0
microcode 18433 0
snd 57014 20 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
yenta_socket 27427 0
i2c_algo_bit 13316 1 radeon
pcmcia_rsrc 18367 1 yenta_socket
soundcore 12600 1 snd
psmouse 82769 0
pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc
snd_page_alloc 18398 3 snd_atiixp_modem,snd_atiixp,snd_pcm
serio_raw 13031 0
wmi 18744 0
shpchp 32265 0
video 19116 0
i2c_piix4 13227 0
parport_pc 27612 1
ati_agp 13242 1
mac_hid 13077 0
lp 17455 0
parport 40930 3 ppdev,parport_pc,lp
pata_acpi 12886 0
8139too 27407 0
8139cp 26728 0
pata_atiixp 13058 2


**** nm-tool ****



NetworkManager Tool

State: connected (global)

- Device: eth0 [Ενσύρματη σύνδεση 1] --------------------------
Type: Wired
Driver: 8139too
State: connected
Default: yes
HW Address: <MAC address removed>

Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s

Wired Properties
Carrier: on

IPv4 Settings:
Address: 192.168.1.5
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1

DNS: 192.168.1.1




**** NetworkManager.state ****



[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true


**** NetworkManager.conf ****


[main]
plugins=ifupdown,keyfile
dns=dnsmasq

[ifupdown]
managed=false


**** interfaces ****


auto lo
iface lo inet loopback



**** iwlist ****




**** resolv ****


# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1


**** blacklist.conf ****


# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr

# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac


**** dmesg ****


[ 0.000000] DMI: Hewlett-Packard Pavilion zv5000 (PB866EA#B1A) /089C, BIOS F.12 02/16/2004
[ 1.801544] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: c1fd247e94bee52eb4a6a56178dff013d775d9cb'
[ 13.985802] wmi: Mapper loaded
[ 16.544976] Modules linked in: radeon(F+) ac97_bus(F) snd_pcm(F) snd_seq_midi(F) snd_rawmidi(F) joydev(F) snd_seq_midi_event(F) snd_seq(F) ppdev(F) snd_timer(F) ttm(F) snd_seq_device(F) drm_kms_helper(F) drm(F) pcmcia(F) microcode(F) snd(F) yenta_socket(F) i2c_algo_bit(F) pcmcia_rsrc(F) soundcore(F) psmouse(F) pcmcia_core(F) snd_page_alloc(F) serio_raw(F) floppy(F+) wmi(F) shpchp(F) video(F) i2c_piix4(F) parport_pc(F) ati_agp(F) mac_hid(F) lp(F) parport(F) pata_acpi(F) 8139too(F) 8139cp(F) pata_atiixp(F)
[ 16.545038] [<c104b832>] warn_slowpath_common+0x72/0xa0
[ 16.545060] [<c104b882>] warn_slowpath_null+0x22/0x30
[ 103.814124] type=1400 audit(1378572511.113:28): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1866 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0


**************** done ********************

1 Γνώσεις Linux: Καθόλου ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 12.04 precise 3.8.0-30-generic 32bit (el_GR.UTF-8, Unity ubuntu-2d), Ubuntu 3.8.0-29-generic
3 Intel Celeron CPU 2.80GHz ‖ RAM 1192 MiB ‖ Hewlett-Packard 089C - Hewlett-Packard Pavilion zv5000 (PB866EA#B1A)
4 Advanced Micro Devices, Inc. [AMD/ATI] RS300M [Mobility Radeon 9100 IGP] [1002:5835] {radeon}
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Uparis
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 07 Σεπ 2013, 19:38
Εκτύπωση

Re: Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Learner » 07 Σεπ 2013, 23:24

Για δοκίμασε
Κώδικας: Επιλογή όλων
sudo apt-get install linux-firmware-nonfree

και κάνε μια επανεκκίνηση.

Αν δεν συνδεθείς, τρέξε εκ νέου το wirelessinfo και δώσε τα νέα αποτελέσματα. (το νέο netinfo.txt)

Επίσης δώσε και όλο το dmesg.

Κώδικας: Επιλογή όλων
dmesg > dmesg.txt
gedit dmesg.txt


Copy-paste όλα τα αποτελέσματα του dmesg.txt εδώ.
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Uparis » 08 Σεπ 2013, 00:06

Learner έγραψε:Για δοκίμασε
Κώδικας: Επιλογή όλων
sudo apt-get install linux-firmware-nonfree

και κάνε μια επανεκκίνηση.

Αν δεν συνδεθείς, τρέξε εκ νέου το wirelessinfo και δώσε τα νέα αποτελέσματα. (το νέο netinfo.txt)


Κώδικας: Επιλογή όλων

*************** info trace ****************



**** uname -a ****


Linux paris-Pavilion-zv5000-PB866EA-B1A 3.8.0-30-generic #44~precise1-Ubuntu SMP Fri Aug 23 17:33:45 UTC 2013 i686 i686 i386 GNU/Linux


**** lsb-release ****


DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS"


**** lspci ****


00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] IXP200 3COM 3C920B Ethernet Controller [1002:4342]
00:14.5 Multimedia audio controller [0401]: Advanced Micro Devices, Inc. [AMD/ATI] IXP150 AC'97 Audio Controller [1002:4341]
Subsystem: Hewlett-Packard Company Device [103c:006b]
--
02:02.0 Network controller [0280]: Broadcom Corporation BCM4301 802.11b Wireless LAN Controller [14e4:4301] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:12f3]
Kernel modules: ssb
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:006b]
Kernel driver in use: 8139too


**** lsusb ****


Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


**** iwconfig ****




**** rfkill ****




**** lsmod ****


Module Size Used by
bnep 17852 2
rfcomm 38400 0
bluetooth 211435 10 bnep,rfcomm
snd_atiixp_modem 18702 5
snd_atiixp 19415 2
snd_ac97_codec 110254 2 snd_atiixp_modem,snd_atiixp
ac97_bus 12670 1 snd_ac97_codec
radeon 892298 2
snd_pcm 85934 5 snd_atiixp_modem,snd_atiixp,snd_ac97_codec
snd_seq_midi 13132 0
snd_rawmidi 25157 1 snd_seq_midi
joydev 17329 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51593 2 snd_seq_midi,snd_seq_midi_event
ttm 72088 1 radeon
snd_timer 28931 2 snd_pcm,snd_seq
drm_kms_helper 47749 1 radeon
ppdev 12849 0
snd_seq_device 14137 3 snd_seq_midi,snd_rawmidi,snd_seq
drm 233935 4 radeon,ttm,drm_kms_helper
snd 57014 20 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcmcia 39854 0
microcode 18433 0
soundcore 12600 1 snd
psmouse 82769 0
i2c_algo_bit 13316 1 radeon
yenta_socket 27427 0
snd_page_alloc 18398 3 snd_atiixp_modem,snd_atiixp,snd_pcm
pcmcia_rsrc 18367 1 yenta_socket
serio_raw 13031 0
i2c_piix4 13227 0
pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc
ati_agp 13242 1
shpchp 32265 0
video 19116 0
wmi 18744 0
parport_pc 27612 1
mac_hid 13077 0
lp 17455 0
parport 40930 3 ppdev,parport_pc,lp
pata_acpi 12886 0
8139too 27407 0
8139cp 26728 0
pata_atiixp 13058 3


**** nm-tool ****



NetworkManager Tool

State: connected (global)

- Device: eth0 [Ενσύρματη σύνδεση 1] --------------------------
Type: Wired
Driver: 8139too
State: connected
Default: yes
HW Address: <MAC address removed>

Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s

Wired Properties
Carrier: on

IPv4 Settings:
Address: 192.168.1.5
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1

DNS: 192.168.1.1




**** NetworkManager.state ****



[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true


**** NetworkManager.conf ****


[main]
plugins=ifupdown,keyfile
dns=dnsmasq

[ifupdown]
managed=false


**** interfaces ****


auto lo
iface lo inet loopback



**** iwlist ****




**** resolv ****


# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1


**** blacklist.conf ****


# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr

# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac


**** dmesg ****


[ 0.000000] DMI: Hewlett-Packard Pavilion zv5000 (PB866EA#B1A) /089C, BIOS F.12 02/16/2004
[ 1.802942] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: c1fd247e94bee52eb4a6a56178dff013d775d9cb'
[ 14.164870] wmi: Mapper loaded
[ 16.837071] Modules linked in: radeon(F+) snd_pcm(F) snd_seq_midi(F) snd_rawmidi(F) joydev(F) snd_seq_midi_event(F) snd_seq(F) ttm(F) snd_timer(F) drm_kms_helper(F) ppdev(F) snd_seq_device(F) drm(F) snd(F) pcmcia(F) microcode(F) soundcore(F) psmouse(F) i2c_algo_bit(F) yenta_socket(F) snd_page_alloc(F) pcmcia_rsrc(F) serio_raw(F) i2c_piix4(F) pcmcia_core(F) floppy(F+) ati_agp(F) shpchp(F) video(F) wmi(F) parport_pc(F) mac_hid(F) lp(F) parport(F) pata_acpi(F) 8139too(F) 8139cp(F) pata_atiixp(F)
[ 16.837132] [<c104b832>] warn_slowpath_common+0x72/0xa0
[ 16.837156] [<c104b882>] warn_slowpath_null+0x22/0x30
[ 112.846196] type=1400 audit(1378587074.505:28): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1914 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0


**************** done ********************

Τελευταία επεξεργασία από Learner και 08 Σεπ 2013, 00:24, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: Διόρθωση [quote]
1 Γνώσεις Linux: Καθόλου ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 12.04 precise 3.8.0-30-generic 32bit (el_GR.UTF-8, Unity ubuntu-2d), Ubuntu 3.8.0-29-generic
3 Intel Celeron CPU 2.80GHz ‖ RAM 1192 MiB ‖ Hewlett-Packard 089C - Hewlett-Packard Pavilion zv5000 (PB866EA#B1A)
4 Advanced Micro Devices, Inc. [AMD/ATI] RS300M [Mobility Radeon 9100 IGP] [1002:5835] {radeon}
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Uparis
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 07 Σεπ 2013, 19:38
Εκτύπωση

Re: Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Uparis » 08 Σεπ 2013, 00:09

Learner έγραψε:Copy-paste όλα τα αποτελέσματα του dmesg.txt εδώ.

Κώδικας: Επιλογή όλων
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-30-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #44~precise1-Ubuntu SMP Fri Aug 23 17:33:45 UTC 2013 (Ubuntu 3.8.0-30.44~precise1-generic 3.8.13.6)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000d7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004bf6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000004bf70000-0x000000004bf7cfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000004bf7d000-0x000000004bf7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000004bf80000-0x000000004bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000005bf80000-0x000000005bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Hewlett-Packard Pavilion zv5000 (PB866EA#B1A) /089C, BIOS F.12 02/16/2004
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x4bf70 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FF8000000 write-back
[ 0.000000] 2 base 048000000 mask FFC000000 write-back
[ 0.000000] 3 base 04BF80000 mask FFFF80000 uncachable
[ 0.000000] 4 base 05BF80000 mask FFFF80000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1GB, range: 128MB, type WB
[ 0.000000] reg 2, base: 1152MB, range: 64MB, type WB
[ 0.000000] reg 3, base: 1244672KB, range: 512KB, type UC
[ 0.000000] reg 4, base: 1506816KB, range: 512KB, type UC
[ 0.000000] total RAM covered: 1215M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1GB, range: 128MB, type WB
[ 0.000000] reg 2, base: 1152MB, range: 64MB, type WB
[ 0.000000] reg 3, base: 1244672KB, range: 512KB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f6610-0x000f661f] mapped at [c00f6610]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[ 0.000000] RAMDISK: [mem 0x3615a000-0x370a4fff]
[ 0.000000] ACPI: RSDP 000f66a0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 4bf79269 0002C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 4bf7cf32 00074 (v01 HP Chinook 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 4bf79295 03C9D (v01 HP SB200 06040000 INTL 20030509)
[ 0.000000] ACPI: FACS 4bf7ffc0 00040
[ 0.000000] ACPI: APIC 4bf7cfa6 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 323MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x4bf6ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x4bf6ffff]
[ 0.000000] On node 0 totalpages: 311039
[ 0.000000] free_area_init_node: node 0, pgdat c1921f80, node_mem_map f727d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 647 pages used for memmap
[ 0.000000] HighMem zone: 82155 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0x5c000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7267000 s35008 r0 d22336 u57344
[ 0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 308608
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-30-generic root=UUID=d04bc846-eb55-43f2-ad56-d96aa0e024c6 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2489088 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0004bf70)
[ 0.000000] Memory: 1204272k/1244608k available (6359k kernel code, 39884k reserved, 3040k data, 796k init, 331208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc192f000 - 0xc19f6000 ( 796 kB)
[ 0.000000] .data : 0xc1635fad - 0xc192e280 (3040 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1635fad (6359 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2800.238 MHz processor
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.47 BogoMIPS (lpj=11200952)
[ 0.008012] pid_max: default: 32768 minimum: 301
[ 0.008081] Security Framework initialized
[ 0.008109] AppArmor: AppArmor initialized
[ 0.008115] Yama: becoming mindful.
[ 0.008219] Mount-cache hash table entries: 512
[ 0.008615] Initializing cgroup subsys cpuacct
[ 0.008626] Initializing cgroup subsys memory
[ 0.008642] Initializing cgroup subsys devices
[ 0.008647] Initializing cgroup subsys freezer
[ 0.008651] Initializing cgroup subsys blkio
[ 0.008655] Initializing cgroup subsys perf_event
[ 0.008660] Initializing cgroup subsys hugetlb
[ 0.008737] CPU0: Hyper-Threading is disabled
[ 0.008747] mce: CPU supports 4 MCE banks
[ 0.008765] CPU0: Thermal monitoring enabled (TM1)
[ 0.008795] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.008795] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
[ 0.008795] tlb_flushall_shift: 6
[ 0.029716] Freeing SMP alternatives: 24k freed
[ 0.032725] ACPI: Core revision 20121018
[ 0.036067] ftrace: allocating 28852 entries in 57 pages
[ 0.048260] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048528] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.052000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.052000] ..... (found apic 0 pin 2) ...
[ 0.094418] ....... works.
[ 0.094423] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.80GHz (fam: 0f, model: 02, stepping: 09)
[ 0.096000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.096000] ... version: 0
[ 0.096000] ... bit width: 40
[ 0.096000] ... generic registers: 18
[ 0.096000] ... value mask: 000000ffffffffff
[ 0.096000] ... max period: 0000007fffffffff
[ 0.096000] ... fixed-purpose events: 0
[ 0.096000] ... event mask: 000000000003ffff
[ 0.096521] Brought up 1 CPUs
[ 0.096531] smpboot: Total of 1 processors activated (5600.47 BogoMIPS)
[ 0.096891] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.097475] devtmpfs: initialized
[ 0.097796] EVM: security.selinux
[ 0.097801] EVM: security.SMACK64
[ 0.097803] EVM: security.capability
[ 0.098045] PM: Registering ACPI NVS region [mem 0x4bf7d000-0x4bf7ffff] (12288 bytes)
[ 0.099910] regulator-dummy: no parameters
[ 0.100200] NET: Registered protocol family 16
[ 0.100542] EISA bus registered
[ 0.100722] ACPI: bus type pci registered
[ 0.100923] PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
[ 0.100929] PCI: Using configuration type 1 for base access
[ 0.102847] bio: create slab <bio-0> at 0
[ 0.103183] ACPI: Added _OSI(Module Device)
[ 0.103190] ACPI: Added _OSI(Processor Device)
[ 0.103193] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.103196] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.103949] ACPI: EC: Look up EC in DSDT
[ 0.106311] ACPI: Interpreter enabled
[ 0.106336] ACPI: (supports S0 S3 S4 S5)
[ 0.106376] ACPI: Using IOAPIC for interrupt routing
[ 0.152433] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
[ 0.152584] ACPI: No dock devices found.
[ 0.152603] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.153324] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.153335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.154618] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.154625] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.154630] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.154635] pci_root PNP0A03:00: host bridge window [mem 0x4c000000-0xfebfffff] (ignored)
[ 0.154639] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.154642] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.154647] PCI: root bus 00: using default resources
[ 0.154653] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.154735] PCI host bridge to bus 0000:00
[ 0.154745] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.154750] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.154754] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.154776] pci 0000:00:00.0: [1002:5833] type 00 class 0x060000
[ 0.154794] pci 0000:00:00.0: reg 10: [mem 0xea000000-0xebffffff pref]
[ 0.154801] pci 0000:00:00.0: reg 14: [mem 0xe8000000-0xe8000fff]
[ 0.154863] pci 0000:00:01.0: [1002:5838] type 01 class 0x060400
[ 0.154923] pci 0000:00:13.0: [1002:4347] type 00 class 0x0c0310
[ 0.154939] pci 0000:00:13.0: reg 10: [mem 0xe8001000-0xe8001fff]
[ 0.154999] pci 0000:00:13.1: [1002:4348] type 00 class 0x0c0310
[ 0.155015] pci 0000:00:13.1: reg 10: [mem 0xe8002000-0xe8002fff]
[ 0.155080] pci 0000:00:14.0: [1002:4353] type 00 class 0x0c0500
[ 0.155095] pci 0000:00:14.0: reg 10: [io 0x8040-0x804f]
[ 0.155104] pci 0000:00:14.0: reg 14: [mem 0x00000000-0x000003ff]
[ 0.155169] pci 0000:00:14.1: [1002:4349] type 00 class 0x01018a
[ 0.155185] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
[ 0.155195] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
[ 0.155205] pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
[ 0.155214] pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
[ 0.155224] pci 0000:00:14.1: reg 20: [io 0x8060-0x806f]
[ 0.155265] pci 0000:00:14.3: [1002:434c] type 00 class 0x060100
[ 0.155336] pci 0000:00:14.4: [1002:4342] type 01 class 0x060401
[ 0.155382] pci 0000:00:14.5: [1002:4341] type 00 class 0x040100
[ 0.155397] pci 0000:00:14.5: reg 10: [mem 0xe8003000-0xe80030ff]
[ 0.155457] pci 0000:00:14.6: [1002:434d] type 00 class 0x070300
[ 0.155473] pci 0000:00:14.6: reg 10: [mem 0xe8003400-0xe80034ff]
[ 0.155570] pci 0000:01:05.0: [1002:5835] type 00 class 0x030000
[ 0.155590] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.155602] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
[ 0.155612] pci 0000:01:05.0: reg 18: [mem 0xe8100000-0xe810ffff]
[ 0.155639] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.155676] pci 0000:01:05.0: supports D1 D2
[ 0.155714] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.155722] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.155732] pci 0000:00:01.0: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.155737] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.155765] pci 0000:02:02.0: [14e4:4301] type 00 class 0x028000
[ 0.155783] pci 0000:02:02.0: reg 10: [mem 0xe8200000-0xe8201fff]
[ 0.155868] pci 0000:02:03.0: [10ec:8139] type 00 class 0x020000
[ 0.155892] pci 0000:02:03.0: reg 10: [io 0xa000-0xa0ff]
[ 0.155905] pci 0000:02:03.0: reg 14: [mem 0xe8204000-0xe82040ff]
[ 0.155983] pci 0000:02:03.0: supports D1 D2
[ 0.155987] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.156059] pci 0000:02:04.0: [104c:ac55] type 02 class 0x060700
[ 0.156085] pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.156125] pci 0000:02:04.0: supports D1 D2
[ 0.156129] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156158] pci 0000:02:04.1: [104c:ac55] type 02 class 0x060700
[ 0.156181] pci 0000:02:04.1: reg 10: [mem 0x00000000-0x00000fff]
[ 0.156217] pci 0000:02:04.1: supports D1 D2
[ 0.156220] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156258] pci 0000:02:07.0: [1033:0035] type 00 class 0x0c0310
[ 0.156283] pci 0000:02:07.0: reg 10: [mem 0xe8202000-0xe8202fff]
[ 0.156367] pci 0000:02:07.0: supports D1 D2
[ 0.156370] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156397] pci 0000:02:07.1: [1033:0035] type 00 class 0x0c0310
[ 0.156420] pci 0000:02:07.1: reg 10: [mem 0xe8203000-0xe8203fff]
[ 0.156504] pci 0000:02:07.1: supports D1 D2
[ 0.156507] pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156535] pci 0000:02:07.2: [1033:00e0] type 00 class 0x0c0320
[ 0.156560] pci 0000:02:07.2: reg 10: [mem 0xe8204400-0xe82044ff]
[ 0.156645] pci 0000:02:07.2: supports D1 D2
[ 0.156648] pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156701] pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode)
[ 0.156709] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.156718] pci 0000:00:14.4: bridge window [mem 0xe8200000-0xe82fffff]
[ 0.156725] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.156729] pci 0000:00:14.4: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.156736] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.156747] pci 0000:02:04.1: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.156792] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-04] (conflicts with (null) [bus 02-04])
[ 0.156803] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 0.156842] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 02-04] (conflicts with (null) [bus 02-04])
[ 0.156849] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07
[ 0.156854] pci_bus 0000:04: busn_res: can not insert [bus 04-07] under [bus 02-04] (conflicts with (null) [bus 02-04])
[ 0.156860] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04]
[ 0.156876] pci_bus 0000:00: on NUMA node 0
[ 0.156917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.157060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.157297] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.157303] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.158725] ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled.
[ 0.158853] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled.
[ 0.158972] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled.
[ 0.159094] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled.
[ 0.159423] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.159435] vgaarb: loaded
[ 0.159437] vgaarb: bridge control possible 0000:01:05.0
[ 0.159932] SCSI subsystem initialized
[ 0.159943] ACPI: bus type scsi registered
[ 0.160168] libata version 3.00 loaded.
[ 0.160243] ACPI: bus type usb registered
[ 0.160301] usbcore: registered new interface driver usbfs
[ 0.160330] usbcore: registered new interface driver hub
[ 0.160458] usbcore: registered new device driver usb
[ 0.160871] PCI: Using ACPI for IRQ routing
[ 0.160884] PCI: pci_cache_line_size set to 64 bytes
[ 0.160978] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.160986] e820: reserve RAM buffer [mem 0x4bf70000-0x4bffffff]
[ 0.161233] NetLabel: Initializing
[ 0.161242] NetLabel: domain hash size = 128
[ 0.161243] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.161267] NetLabel: unlabeled traffic allowed by default
[ 0.161529] Switching to clocksource refined-jiffies
[ 0.175275] AppArmor: AppArmor Filesystem Enabled
[ 0.175358] pnp: PnP ACPI init
[ 0.175404] ACPI: bus type pnp registered
[ 0.175741] pnp 00:00: [dma 4]
[ 0.175822] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.175934] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.176109] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.176214] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.176322] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.176424] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.176662] pnp 00:06: disabling [io 0x8000-0x8068] because it overlaps 0000:00:14.1 BAR 4 [io 0x8060-0x806f]
[ 0.176777] system 00:06: [io 0x0200-0x020f] has been reserved
[ 0.176784] system 00:06: [io 0x0c14] has been reserved
[ 0.176789] system 00:06: [io 0x0c50-0x0c52] has been reserved
[ 0.176793] system 00:06: [io 0x0c6c] has been reserved
[ 0.176796] system 00:06: [io 0x0c6f] has been reserved
[ 0.176801] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.176805] system 00:06: [io 0x1080] has been reserved
[ 0.176809] system 00:06: [io 0x8800] has been reserved
[ 0.176813] system 00:06: [io 0xfe00] has been reserved
[ 0.176818] system 00:06: [io 0xfe10-0xfe11] has been reserved
[ 0.176824] system 00:06: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.176829] system 00:06: [mem 0x00100000-0x4bffffff] could not be reserved
[ 0.176834] system 00:06: [mem 0xe8000000-0xe8000fff] has been reserved
[ 0.176839] system 00:06: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.176847] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.177105] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (disabled)
[ 0.177198] pnp 00:08: [dma 1]
[ 0.177198] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.200063] pnp: PnP ACPI: found 9 devices
[ 0.200071] ACPI: ACPI bus type pnp unregistered
[ 0.200078] PnPBIOS: Disabled by ACPI PNP
[ 0.242073] Switching to clocksource acpi_pm
[ 0.242178] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.242186] pci 0000:02:04.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.242196] pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-04] add_size 8000000
[ 0.242210] pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 8000000
[ 0.242225] pci 0000:00:14.4: BAR 15: assigned [mem 0x5c000000-0x63ffffff pref]
[ 0.242233] pci 0000:00:14.0: BAR 1: assigned [mem 0x64000000-0x640003ff]
[ 0.242250] pci 0000:01:05.0: BAR 6: assigned [mem 0xe8120000-0xe813ffff pref]
[ 0.242256] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.242263] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.242269] pci 0000:00:01.0: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.242274] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.242290] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.242296] pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.242300] pci 0000:02:04.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.242304] pci 0000:02:04.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.242307] pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.242311] pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.242314] pci 0000:02:04.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.242317] pci 0000:02:04.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.242329] pci 0000:02:04.0: BAR 0: assigned [mem 0x68000000-0x68000fff]
[ 0.242342] pci 0000:02:04.0: BAR 15: assigned [mem 0x5c000000-0x5fffffff pref]
[ 0.242350] pci 0000:02:04.0: BAR 16: assigned [mem 0x6c000000-0x6fffffff]
[ 0.242356] pci 0000:02:04.1: BAR 0: assigned [mem 0x70000000-0x70000fff]
[ 0.242365] pci 0000:02:04.1: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
[ 0.242371] pci 0000:02:04.1: BAR 16: assigned [mem 0x74000000-0x77ffffff]
[ 0.242376] pci 0000:02:04.0: BAR 13: assigned [io 0xa400-0xa4ff]
[ 0.242380] pci 0000:02:04.0: BAR 14: assigned [io 0xa800-0xa8ff]
[ 0.242384] pci 0000:02:04.1: BAR 13: assigned [io 0xac00-0xacff]
[ 0.242392] pci 0000:02:04.1: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.242398] pci 0000:02:04.0: CardBus bridge to [bus 03]
[ 0.242401] pci 0000:02:04.0: bridge window [io 0xa400-0xa4ff]
[ 0.242408] pci 0000:02:04.0: bridge window [io 0xa800-0xa8ff]
[ 0.242415] pci 0000:02:04.0: bridge window [mem 0x5c000000-0x5fffffff pref]
[ 0.242421] pci 0000:02:04.0: bridge window [mem 0x6c000000-0x6fffffff]
[ 0.242427] pci 0000:02:04.1: CardBus bridge to [bus 04-07]
[ 0.242431] pci 0000:02:04.1: bridge window [io 0xac00-0xacff]
[ 0.242437] pci 0000:02:04.1: bridge window [io 0x1400-0x14ff]
[ 0.242444] pci 0000:02:04.1: bridge window [mem 0x60000000-0x63ffffff pref]
[ 0.242450] pci 0000:02:04.1: bridge window [mem 0x74000000-0x77ffffff]
[ 0.242457] pci 0000:00:14.4: PCI bridge to [bus 02-04]
[ 0.242462] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.242468] pci 0000:00:14.4: bridge window [mem 0xe8200000-0xe82fffff]
[ 0.242474] pci 0000:00:14.4: bridge window [mem 0x5c000000-0x63ffffff pref]
[ 0.242552] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.242559] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.242564] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.242567] pci_bus 0000:01: resource 1 [mem 0xe8100000-0xe81fffff]
[ 0.242571] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[ 0.242575] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.242578] pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe82fffff]
[ 0.242582] pci_bus 0000:02: resource 2 [mem 0x5c000000-0x63ffffff pref]
[ 0.242585] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.242589] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.242592] pci_bus 0000:03: resource 0 [io 0xa400-0xa4ff]
[ 0.242595] pci_bus 0000:03: resource 1 [io 0xa800-0xa8ff]
[ 0.242599] pci_bus 0000:03: resource 2 [mem 0x5c000000-0x5fffffff pref]
[ 0.242602] pci_bus 0000:03: resource 3 [mem 0x6c000000-0x6fffffff]
[ 0.242606] pci_bus 0000:04: resource 0 [io 0xac00-0xacff]
[ 0.242609] pci_bus 0000:04: resource 1 [io 0x1400-0x14ff]
[ 0.242612] pci_bus 0000:04: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.242615] pci_bus 0000:04: resource 3 [mem 0x74000000-0x77ffffff]
[ 0.242689] NET: Registered protocol family 2
[ 0.242992] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.243053] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.243128] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.243292] TCP: reno registered
[ 0.243311] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.243347] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.243535] NET: Registered protocol family 1
[ 0.352098] pci 0000:01:05.0: Boot video device
[ 0.464113] PCI: CLS 32 bytes, default 64
[ 0.464243] Trying to unpack rootfs image as initramfs...
[ 1.098537] Freeing initrd memory: 15660k freed
[ 1.134386] Initialise module verification
[ 1.134479] audit: initializing netlink socket (disabled)
[ 1.134507] type=2000 audit(1378597761.131:1): initialized
[ 1.160875] bounce pool size: 64 pages
[ 1.160920] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.163692] VFS: Disk quotas dquot_6.5.2
[ 1.163803] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.165144] fuse init (API version 7.20)
[ 1.165414] msgmni has been set to 1735
[ 1.166969] Key type asymmetric registered
[ 1.166977] Asymmetric key parser 'x509' registered
[ 1.167101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.167263] io scheduler noop registered
[ 1.167269] io scheduler deadline registered (default)
[ 1.167296] io scheduler cfq registered
[ 1.167583] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.167622] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.170535] ACPI: AC Adapter [ACAD] (on-line)
[ 1.170817] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.170894] ACPI: Lid Switch [LID]
[ 1.170996] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.171008] ACPI: Power Button [PWRB]
[ 1.171110] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.171120] ACPI: Power Button [PWRF]
[ 1.171233] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.171244] ACPI: acpi_idle registered with cpuidle
[ 1.229146] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.229154] ACPI: Thermal Zone [THRM] (55 C)
[ 1.229370] GHES: HEST is not enabled!
[ 1.229617] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.234739] isapnp: Scanning for PnP cards...
[ 1.283996] Linux agpgart interface v0.103
[ 1.288304] brd: module loaded
[ 1.290634] loop: module loaded
[ 1.291457] libphy: Fixed MDIO Bus: probed
[ 1.291610] tun: Universal TUN/TAP device driver, 1.6
[ 1.291614] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.291782] PPP generic driver version 2.4.2
[ 1.291935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.291942] ehci-pci: EHCI PCI platform driver
[ 1.292124] ehci-pci 0000:02:07.2: EHCI Host Controller
[ 1.292147] ehci-pci 0000:02:07.2: new USB bus registered, assigned bus number 1
[ 1.292258] ehci-pci 0000:02:07.2: irq 19, io mem 0xe8204400
[ 1.335835] ehci-pci 0000:02:07.2: USB 2.0 started, EHCI 1.00
[ 1.335893] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.335899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.335902] usb usb1: Product: EHCI Host Controller
[ 1.335906] usb usb1: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
[ 1.335908] usb usb1: SerialNumber: 0000:02:07.2
[ 1.336324] hub 1-0:1.0: USB hub found
[ 1.336353] hub 1-0:1.0: 5 ports detected
[ 1.336614] ehci-platform: EHCI generic platform driver
[ 1.336648] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.336735] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.336754] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.336798] ohci_hcd 0000:00:13.0: irq 19, io mem 0xe8001000
[ 1.514785] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.514792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.514797] usb usb2: Product: OHCI Host Controller
[ 1.514800] usb usb2: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
[ 1.514803] usb usb2: SerialNumber: 0000:00:13.0
[ 1.515085] hub 2-0:1.0: USB hub found
[ 1.515105] hub 2-0:1.0: 3 ports detected
[ 1.515342] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.515362] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.515404] ohci_hcd 0000:00:13.1: irq 19, io mem 0xe8002000
[ 1.602564] isapnp: No Plug & Play device found
[ 1.606653] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.606660] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.606663] usb usb3: Product: OHCI Host Controller
[ 1.606667] usb usb3: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
[ 1.606669] usb usb3: SerialNumber: 0000:00:13.1
[ 1.606958] hub 3-0:1.0: USB hub found
[ 1.606977] hub 3-0:1.0: 3 ports detected
[ 1.607194] ohci_hcd 0000:02:07.0: OHCI Host Controller
[ 1.607219] ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4
[ 1.607281] ohci_hcd 0000:02:07.0: irq 16, io mem 0xe8202000
[ 1.689924] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.689932] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.689935] usb usb4: Product: OHCI Host Controller
[ 1.689939] usb usb4: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
[ 1.689942] usb usb4: SerialNumber: 0000:02:07.0
[ 1.690245] hub 4-0:1.0: USB hub found
[ 1.690264] hub 4-0:1.0: 3 ports detected
[ 1.690505] ohci_hcd 0000:02:07.1: OHCI Host Controller
[ 1.690524] ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5
[ 1.690622] ohci_hcd 0000:02:07.1: irq 18, io mem 0xe8203000
[ 1.774118] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.774126] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.774129] usb usb5: Product: OHCI Host Controller
[ 1.774133] usb usb5: Manufacturer: Linux 3.8.0-30-generic ohci_hcd
[ 1.774136] usb usb5: SerialNumber: 0000:02:07.1
[ 1.774427] hub 5-0:1.0: USB hub found
[ 1.774446] hub 5-0:1.0: 2 ports detected
[ 1.774644] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.774823] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.782771] i8042: Detected active multiplexing controller, rev 1.1
[ 1.789988] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.790013] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.790122] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.790194] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.790283] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.790684] mousedev: PS/2 mouse device common for all mice
[ 1.791298] rtc_cmos 00:02: RTC can wake from S4
[ 1.791517] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.791557] rtc0: alarms up to one day, 242 bytes nvram
[ 1.791753] device-mapper: uevent: version 1.0.3
[ 1.791952] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.792120] EISA: Probing bus 0 at eisa.0
[ 1.792133] Cannot allocate resource for EISA slot 1
[ 1.792153] Cannot allocate resource for EISA slot 8
[ 1.792156] EISA: Detected 0 cards.
[ 1.792183] cpufreq-nforce2: No nForce2 chipset.
[ 1.792219] cpuidle: using governor ladder
[ 1.792256] cpuidle: using governor menu
[ 1.792263] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.792267] EFI Variables Facility v0.08 2004-May-17
[ 1.792862] ashmem: initialized
[ 1.793190] TCP: cubic registered
[ 1.793393] NET: Registered protocol family 10
[ 1.793928] NET: Registered protocol family 17
[ 1.793979] Key type dns_resolver registered
[ 1.794354] Using IPI No-Shortcut mode
[ 1.794608] ACPI: Battery Slot [BAT1] (battery present)
[ 1.794822] Loading module verification certificates
[ 1.802942] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: c1fd247e94bee52eb4a6a56178dff013d775d9cb'
[ 1.802988] registered taskstats version 1
[ 1.812315] Key type trusted registered
[ 1.817994] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.826592] Key type encrypted registered
[ 1.836477] rtc_cmos 00:02: setting system clock to 2013-09-07 23:49:23 UTC (1378597763)
[ 1.836667] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.836673] EDD information not available.
[ 1.836940] Freeing unused kernel memory: 796k freed
[ 1.838564] Write protecting the kernel text: 6360k
[ 1.838638] Write protecting the kernel read-only data: 2500k
[ 1.908333] udevd[88]: starting version 175
[ 2.263024] Disabling lock debugging due to kernel taint
[ 2.279620] scsi0 : pata_atiixp
[ 2.288860] scsi1 : pata_atiixp
[ 2.292821] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8060 irq 14
[ 2.292830] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8068 irq 15
[ 2.337646] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.337696] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.338965] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.339894] 8139too 0000:02:03.0 eth0: RealTek RTL8139 at 0x0001a000, 00:02:3f:21:d9:35, IRQ 19
[ 2.452516] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0C29, max MWDMA2
[ 2.456672] ata1.00: HPA detected: current 110861685, native 117210240
[ 2.456685] ata1.00: ATA-6: FUJITSU MHS2060AT, 8205, max UDMA/100
[ 2.456689] ata1.00: 110861685 sectors, multi 16: LBA
[ 2.468451] ata2.00: configured for MWDMA2
[ 2.472649] ata1.00: configured for UDMA/100
[ 2.472983] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHS2060A 8205 PQ: 0 ANSI: 5
[ 2.473695] sd 0:0:0:0: [sda] 110861685 512-byte logical blocks: (56.7 GB/52.8 GiB)
[ 2.473980] sd 0:0:0:0: [sda] Write Protect is off
[ 2.473987] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.474109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.474601] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.480414] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N 0C29 PQ: 0 ANSI: 5
[ 2.486269] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.486280] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.486598] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.486996] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.519552] sda: sda1 sda2 < sda5 >
[ 2.521026] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.705745] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.504105] floppy0: no floppy controllers found
[ 5.504127] work still pending
[ 7.429939] init: ureadahead main process (250) terminated with status 5
[ 9.018862] Adding 1242108k swap on /dev/sda5. Priority:-1 extents:1 across:1242108k
[ 11.273762] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.744886] udevd[325]: starting version 175
[ 13.109956] lp: driver loaded but no devices found
[ 13.432340] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.076723] parport_pc 00:08: reported by Plug and Play ACPI
[ 14.076765] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 14.164870] wmi: Mapper loaded
[ 14.172500] lp0: using parport0 (interrupt-driven).
[ 14.175099] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 14.175442] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input4
[ 14.310663] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.319416] agpgart-ati 0000:00:00.0: Ati IGP9100/M chipset
[ 14.319497] reserve_ram_pages_type failed [mem 0x35346000-0x35346fff], track 0x10, req 0x10
[ 14.319867] reserve_ram_pages_type failed [mem 0x35345000-0x35345fff], track 0x10, req 0x10
[ 14.320369] reserve_ram_pages_type failed [mem 0x3536d000-0x3536dfff], track 0x10, req 0x10
[ 14.320741] reserve_ram_pages_type failed [mem 0x3536e000-0x3536efff], track 0x10, req 0x10
[ 14.321108] reserve_ram_pages_type failed [mem 0x3536f000-0x3536ffff], track 0x10, req 0x10
[ 14.321476] reserve_ram_pages_type failed [mem 0x35370000-0x35370fff], track 0x10, req 0x10
[ 14.321846] reserve_ram_pages_type failed [mem 0x35371000-0x35371fff], track 0x10, req 0x10
[ 14.340409] reserve_ram_pages_type failed [mem 0x352e8000-0x352e8fff], track 0x10, req 0x10
[ 14.340782] reserve_ram_pages_type failed [mem 0x352e7000-0x352e7fff], track 0x10, req 0x10
[ 14.358068] agpgart-ati 0000:00:00.0: AGP aperture is 32M @ 0xea000000
[ 14.598729] ACPI Warning: 0x00008040-0x00008047 SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 1 (20121018/utaddress-251)
[ 14.598745] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.867625] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:006b]
[ 14.867655] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions
[ 14.867664] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 14.867667] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 14.867673] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01111d22, devctl 0x64
[ 15.138202] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x17
[ 15.168813] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c18, PCI irq 17
[ 15.168823] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 15.168839] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
[ 15.168844] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff:
[ 15.169797] excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa8ff 0xac00-0xacff
[ 15.174319] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe82fffff]
[ 15.174328] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8200000-0xe82fffff:
[ 15.174334] excluding 0xe8200000-0xe820ffff
[ 15.174350] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x5c000000-0x63ffffff pref]
[ 15.174354] pcmcia_socket pcmcia_socket0: cs: memory probe 0x5c000000-0x63ffffff:
[ 15.174371] excluding 0x5c000000-0x63ffffff
[ 15.217148] yenta_cardbus 0000:02:04.1: CardBus bridge found [103c:006b]
[ 15.217177] yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI
[ 15.217181] yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI
[ 15.217188] yenta_cardbus 0000:02:04.1: TI: mfunc 0x01111d22, devctl 0x64
[ 15.448671] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x0c18, PCI irq 16
[ 15.448681] yenta_cardbus 0000:02:04.1: Socket status: 30000006
[ 15.448687] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[ 15.448706] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
[ 15.448711] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xafff:
[ 15.449664] excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa8ff 0xac00-0xacff
[ 15.474120] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe82fffff]
[ 15.474130] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe8200000-0xe82fffff:
[ 15.474136] excluding 0xe8200000-0xe820ffff
[ 15.474154] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0x5c000000-0x63ffffff pref]
[ 15.474158] pcmcia_socket pcmcia_socket1: cs: memory probe 0x5c000000-0x63ffffff:
[ 15.474173] excluding 0x5c000000-0x63ffffff
[ 15.580394] [drm] Initialized drm 1.1.0 20060810
[ 15.790542] ppdev: user-space parallel port driver
[ 16.126051] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input5
[ 16.148971] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input6
[ 16.203759] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 16.436677] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
[ 16.437400] excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x370-0x37f
[ 16.438018] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
[ 16.438302] excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
[ 16.438640] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
[ 16.439074] clean.
[ 16.439171] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
[ 16.439384] excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[ 16.439697] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[ 16.439713] excluding 0xc0000-0xd7fff 0xe0000-0xfffff
[ 16.439815] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 16.439843] clean.
[ 16.439927] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[ 16.439950] excluding 0x60000000-0x60ffffff
[ 16.440414] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 16.441136] excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x370-0x37f
[ 16.441742] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 16.442024] excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
[ 16.442358] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 16.442791] clean.
[ 16.442881] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 16.443095] excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[ 16.443402] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 16.443418] excluding 0xc0000-0xd7fff 0xe0000-0xfffff
[ 16.443520] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 16.443548] clean.
[ 16.443633] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 16.443656] excluding 0x60000000-0x60ffffff
[ 16.443751] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 16.444175] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[ 16.444668] clean.
[ 16.445072] clean.
[ 16.833054] [drm] radeon defaulting to kernel modesetting.
[ 16.833066] [drm] radeon kernel modesetting enabled.
[ 16.834632] [drm] initializing kernel modesetting (RS300 0x1002:0x5835 0x103C:0x006B).
[ 16.834697] [drm] register mmio base: 0xE8100000
[ 16.834700] [drm] register mmio size: 65536
[ 16.834923] agpgart-ati 0000:00:00.0: AGP 3.0 bridge
[ 16.834952] agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode
[ 16.834973] radeon 0000:01:05.0: putting AGP V3 device into 8x mode
[ 16.835015] radeon 0000:01:05.0: GTT: 32M 0xEA000000 - 0xEBFFFFFF
[ 16.835027] radeon 0000:01:05.0: VRAM: 64M 0x000000004C000000 - 0x000000004FFFFFFF (64M used)
[ 16.835263] [drm] Detected VRAM RAM=64M, BAR=128M
[ 16.835270] [drm] RAM width 64bits DDR
[ 16.835440] [TTM] Zone kernel: Available graphics memory: 444772 kiB
[ 16.835446] [TTM] Zone highmem: Available graphics memory: 610376 kiB
[ 16.835449] [TTM] Initializing pool allocator
[ 16.835458] [TTM] Initializing DMA pool allocator
[ 16.835529] [drm] radeon: 64M of VRAM memory ready
[ 16.835536] [drm] radeon: 32M of GTT memory ready.
[ 16.837014] radeon 0000:01:05.0: WB disabled
[ 16.837029] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000ea000000 and cpu addr 0xf8424000
[ 16.837037] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 16.837040] [drm] Driver supports precise vblank timestamp query.
[ 16.837049] ------------[ cut here ]------------
[ 16.837064] WARNING: at /build/buildd/linux-lts-raring-3.8.0/kernel/workqueue.c:1300 __queue_work+0x221/0x270()
[ 16.837067] Hardware name: Pavilion zv5000 (PB866EA#B1A)
[ 16.837071] Modules linked in: radeon(F+) snd_pcm(F) snd_seq_midi(F) snd_rawmidi(F) joydev(F) snd_seq_midi_event(F) snd_seq(F) ttm(F) snd_timer(F) drm_kms_helper(F) ppdev(F) snd_seq_device(F) drm(F) snd(F) pcmcia(F) microcode(F) soundcore(F) psmouse(F) i2c_algo_bit(F) yenta_socket(F) snd_page_alloc(F) pcmcia_rsrc(F) serio_raw(F) i2c_piix4(F) pcmcia_core(F) floppy(F+) ati_agp(F) shpchp(F) video(F) wmi(F) parport_pc(F) mac_hid(F) lp(F) parport(F) pata_acpi(F) 8139too(F) 8139cp(F) pata_atiixp(F)
[ 16.837117] Pid: 516, comm: modprobe Tainted: GF 3.8.0-30-generic #44~precise1-Ubuntu
[ 16.837120] Call Trace:
[ 16.837132] [<c104b832>] warn_slowpath_common+0x72/0xa0
[ 16.837140] [<c1065ef1>] ? __queue_work+0x221/0x270
[ 16.837149] [<c1065ef1>] ? __queue_work+0x221/0x270
[ 16.837156] [<c104b882>] warn_slowpath_null+0x22/0x30
[ 16.837162] [<c1065ef1>] __queue_work+0x221/0x270
[ 16.837170] [<c1066589>] queue_work_on+0x59/0x60
[ 16.837178] [<c10665c6>] queue_work+0x16/0x20
[ 16.837186] [<c10665e4>] schedule_work+0x14/0x20
[ 16.837254] [<f87e5b73>] r100_irq_process+0x233/0x240 [radeon]
[ 16.837294] [<f87e0548>] radeon_driver_irq_preinstall_kms+0xc8/0xd0 [radeon]
[ 16.837324] [<f85fe3ae>] drm_irq_install+0xbe/0x210 [drm]
[ 16.837366] [<f87e0690>] radeon_irq_kms_init+0x50/0x100 [radeon]
[ 16.837401] [<f87e8b9d>] r100_startup.part.11+0x1d/0xb0 [radeon]
[ 16.837436] [<f87ea63e>] r100_startup+0x6e/0xa0 [radeon]
[ 16.837471] [<f87eac54>] r100_init+0x1b4/0x330 [radeon]
[ 16.837483] [<c13e6133>] ? vga_switcheroo_register_client+0x33/0x40
[ 16.837523] [<f87b63dd>] radeon_device_init+0x56d/0x620 [radeon]
[ 16.837553] [<f87b4dc0>] ? cail_mc_write+0x20/0x20 [radeon]
[ 16.837584] [<f87b7d58>] radeon_driver_load_kms+0x88/0x140 [radeon]
[ 16.837613] [<f8602713>] drm_get_pci_dev+0x143/0x290 [drm]
[ 16.837646] [<f879e1d1>] ? radeon_kick_out_firmware_fb+0xd1/0x110 [radeon]
[ 16.837671] [<f879e23c>] radeon_pci_probe+0x2c/0x40 [radeon]
[ 16.837682] [<c131d58b>] pci_device_probe+0x7b/0xb0
[ 16.837696] [<c13eacfb>] really_probe+0x4b/0x1c0
[ 16.837703] [<c13f4e29>] ? pm_runtime_barrier+0x49/0xb0
[ 16.837709] [<c13eaf93>] driver_probe_device+0x33/0x50
[ 16.837716] [<c13eb041>] __driver_attach+0x91/0xa0
[ 16.837721] [<c13eafb0>] ? driver_probe_device+0x50/0x50
[ 16.837729] [<c13e970a>] bus_for_each_dev+0x4a/0x80
[ 16.837737] [<c13ea9f1>] driver_attach+0x21/0x30
[ 16.837741] [<c13eafb0>] ? driver_probe_device+0x50/0x50
[ 16.837747] [<c13ea62f>] bus_add_driver+0x16f/0x260
[ 16.837753] [<c131c660>] ? pci_dev_put+0x20/0x20
[ 16.837759] [<c13eb4fa>] driver_register+0x6a/0x130
[ 16.837766] [<c131c7d3>] __pci_register_driver+0x33/0x40
[ 16.837795] [<f860295d>] drm_pci_init+0xfd/0x110 [drm]
[ 16.837833] [<f88790d9>] radeon_init+0xd9/0x1000 [radeon]
[ 16.837843] [<c1003054>] do_one_initcall+0x34/0x170
[ 16.837861] [<f8879000>] ? 0xf8878fff
[ 16.837874] [<c161a87f>] do_init_module+0x80/0x1c6
[ 16.837884] [<c10af03b>] load_module+0x41b/0x5f0
[ 16.837892] [<c10acee0>] ? add_kallsyms+0x1e0/0x1e0
[ 16.837908] [<c12f8ae2>] ? _copy_from_user+0x42/0x60
[ 16.837917] [<c10af296>] sys_init_module+0x86/0xa0
[ 16.837934] [<c1634b0d>] sysenter_do_call+0x12/0x28
[ 16.837939] ---[ end trace 16a5d86925a74ca3 ]---
[ 16.837966] [drm] radeon: irq initialized.
[ 16.839908] [drm] Loading R200 Microcode
[ 17.212659] [drm] radeon: ring at 0x00000000EA001000
[ 17.212693] [drm] ring test succeeded in 0 usecs
[ 17.213163] [drm] ib test succeeded in 0 usecs
[ 17.217868] [drm] Panel ID String: LGP
[ 17.217878] [drm] Panel Size 1280x800
[ 17.239638] [drm] radeon legacy LVDS backlight initialized
[ 17.239653] [drm] Radeon Display Connectors
[ 17.239655] [drm] Connector 0:
[ 17.239659] [drm] VGA-1
[ 17.239663] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 17.239665] [drm] Encoders:
[ 17.239668] [drm] CRT1: INTERNAL_DAC2
[ 17.239670] [drm] Connector 1:
[ 17.239673] [drm] LVDS-1
[ 17.239675] [drm] Encoders:
[ 17.239677] [drm] LCD1: INTERNAL_LVDS
[ 17.239679] [drm] Connector 2:
[ 17.239681] [drm] SVIDEO-1
[ 17.239683] [drm] Encoders:
[ 17.239686] [drm] TV1: INTERNAL_DAC2
[ 17.300921] [drm] fb mappable at 0xF0040000
[ 17.300929] [drm] vram apper at 0xF0000000
[ 17.300932] [drm] size 4096000
[ 17.300934] [drm] fb depth is 24
[ 17.300936] [drm] pitch is 5120
[ 17.301477] fbcon: radeondrmfb (fb0) is primary device
[ 17.336823] Console: switching to colour frame buffer device 160x50
[ 17.362426] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 17.362430] radeon 0000:01:05.0: registered panic notifier
[ 17.368912] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:05.0 on minor 0
[ 17.514492] floppy0: no floppy controllers found
[ 17.514516] work still pending
[ 19.862357] type=1400 audit(1378586981.521:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=592 comm="apparmor_parser"
[ 19.863120] type=1400 audit(1378586981.521:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=592 comm="apparmor_parser"
[ 19.863531] type=1400 audit(1378586981.521:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=592 comm="apparmor_parser"
[ 19.864641] type=1400 audit(1378586981.525:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=593 comm="apparmor_parser"
[ 19.865408] type=1400 audit(1378586981.525:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=593 comm="apparmor_parser"
[ 19.865804] type=1400 audit(1378586981.525:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=593 comm="apparmor_parser"
[ 21.638213] init: failsafe main process (703) killed by TERM signal
[ 25.878814] Bluetooth: Core ver 2.16
[ 25.879085] NET: Registered protocol family 31
[ 25.879093] Bluetooth: HCI device and connection manager initialized
[ 25.882186] Bluetooth: HCI socket layer initialized
[ 25.882200] Bluetooth: L2CAP socket layer initialized
[ 25.882240] Bluetooth: SCO socket layer initialized
[ 25.932979] type=1400 audit(1378586987.593:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=786 comm="apparmor_parser"
[ 25.933928] type=1400 audit(1378586987.593:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=786 comm="apparmor_parser"
[ 26.154010] Bluetooth: RFCOMM TTY layer initialized
[ 26.154049] Bluetooth: RFCOMM socket layer initialized
[ 26.154053] Bluetooth: RFCOMM ver 1.11
[ 26.394984] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.394991] Bluetooth: BNEP filters: protocol multicast
[ 26.395014] Bluetooth: BNEP socket layer initialized
[ 31.502386] type=1400 audit(1378586993.161:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=860 comm="apparmor_parser"
[ 31.503026] type=1400 audit(1378586993.161:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=860 comm="apparmor_parser"
[ 31.514678] type=1400 audit(1378586993.173:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=861 comm="apparmor_parser"
[ 31.516904] type=1400 audit(1378586993.177:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=861 comm="apparmor_parser"
[ 31.517306] type=1400 audit(1378586993.177:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=861 comm="apparmor_parser"
[ 31.812141] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 31.832817] type=1400 audit(1378586993.493:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=862 comm="apparmor_parser"
[ 31.842488] type=1400 audit(1378586993.501:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=862 comm="apparmor_parser"
[ 31.845849] type=1400 audit(1378586993.505:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=862 comm="apparmor_parser"
[ 31.849300] type=1400 audit(1378586993.509:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=862 comm="apparmor_parser"
[ 31.862229] type=1400 audit(1378586993.521:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=862 comm="apparmor_parser"
[ 112.846187] audit_printk_skb: 24 callbacks suppressed
[ 112.846196] type=1400 audit(1378587074.505:28): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1914 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 441.038696] 8139too 0000:02:03.0 eth0: link down
[ 445.104620] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 467.794428] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 467.794479] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
1 Γνώσεις Linux: Καθόλου ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 12.04 precise 3.8.0-30-generic 32bit (el_GR.UTF-8, Unity ubuntu-2d), Ubuntu 3.8.0-29-generic
3 Intel Celeron CPU 2.80GHz ‖ RAM 1192 MiB ‖ Hewlett-Packard 089C - Hewlett-Packard Pavilion zv5000 (PB866EA#B1A)
4 Advanced Micro Devices, Inc. [AMD/ATI] RS300M [Mobility Radeon 9100 IGP] [1002:5835] {radeon}
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Uparis
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 07 Σεπ 2013, 19:38
Εκτύπωση

Re: Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Learner » 08 Σεπ 2013, 00:22

Το WiFi είναι σίγουρα ανοιχτό ; Εννοώ μήπως είναι κλειστό από κάποιο hardware switch ; Π.χ Fn+F3 (ή κάποιο άλλο F)

Για δοκίμασε
Κώδικας: Επιλογή όλων
sudo modprobe b43

Περίμενε 10-15 δευτερόλεπτα και κοίτα μετά αν ανιχνεύει δίκτυα.
Αφού εκτελέσεις την παραπάνω εντολή, δώσε και το αποτέλεσμα της
Κώδικας: Επιλογή όλων
dmesg | tail -n 30
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Uparis » 08 Σεπ 2013, 00:30

Learner έγραψε:Το WiFi είναι σίγουρα ανοιχτό ; Εννοώ μήπως είναι κλειστό από κάποιο hardware switch ; Π.χ Fn+F3 (ή κάποιο άλλο F)

Λογικά είναι ανοιχτό. Εχει ξεχωριστό φορτιζόμενο κουμπι το οποιο το πατάω συνέχεια.Στα xp όταν ήταν ανοιχτό είχε φωτισμό .
1 Γνώσεις Linux: Καθόλου ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 12.04 precise 3.8.0-30-generic 32bit (el_GR.UTF-8, Unity ubuntu-2d), Ubuntu 3.8.0-29-generic
3 Intel Celeron CPU 2.80GHz ‖ RAM 1192 MiB ‖ Hewlett-Packard 089C - Hewlett-Packard Pavilion zv5000 (PB866EA#B1A)
4 Advanced Micro Devices, Inc. [AMD/ATI] RS300M [Mobility Radeon 9100 IGP] [1002:5835] {radeon}
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Uparis
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 07 Σεπ 2013, 19:38
Εκτύπωση

Re: Πρόβλημα με την ασύρματη κάρτα σε HP pavilion zv 5000

Δημοσίευσηαπό Uparis » 08 Σεπ 2013, 00:31

Learner έγραψε:
Για δοκίμασε
Κώδικας: Επιλογή όλων
sudo modprobe b43

Περίμενε 10-15 δευτερόλεπτα και κοίτα μετά αν ανιχνεύει δίκτυα.
Αφού εκτελέσεις την παραπάνω εντολή, δώσε και το αποτέλεσμα της
Κώδικας: Επιλογή όλων
dmesg | tail -n 30

Κώδικας: Επιλογή όλων
paris@paris-Pavilion-zv5000-PB866EA-B1A:~$ sudo modprobe b43
[sudo] password for paris:
paris@paris-Pavilion-zv5000-PB866EA-B1A:~$ dmesg | tail -n 30
[ 26.154053] Bluetooth: RFCOMM ver 1.11
[ 26.394984] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.394991] Bluetooth: BNEP filters: protocol multicast
[ 26.395014] Bluetooth: BNEP socket layer initialized
[ 31.502386] type=1400 audit(1378586993.161:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=860 comm="apparmor_parser"
[ 31.503026] type=1400 audit(1378586993.161:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=860 comm="apparmor_parser"
[ 31.514678] type=1400 audit(1378586993.173:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=861 comm="apparmor_parser"
[ 31.516904] type=1400 audit(1378586993.177:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=861 comm="apparmor_parser"
[ 31.517306] type=1400 audit(1378586993.177:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=861 comm="apparmor_parser"
[ 31.812141] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 31.832817] type=1400 audit(1378586993.493:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=862 comm="apparmor_parser"
[ 31.842488] type=1400 audit(1378586993.501:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=862 comm="apparmor_parser"
[ 31.845849] type=1400 audit(1378586993.505:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=862 comm="apparmor_parser"
[ 31.849300] type=1400 audit(1378586993.509:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=862 comm="apparmor_parser"
[ 31.862229] type=1400 audit(1378586993.521:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=862 comm="apparmor_parser"
[ 112.846187] audit_printk_skb: 24 callbacks suppressed
[ 112.846196] type=1400 audit(1378587074.505:28): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1914 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 441.038696] 8139too 0000:02:03.0 eth0: link down
[ 445.104620] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 467.794428] 8139too 0000:02:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 467.794479] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2077.231385] ssb: Found chip with id 0x4301, rev 0x02 and package 0x00
[ 2077.231399] ssb: Core 0 found: IEEE 802.11 (cc 0x812, rev 0x02, vendor 0x4243)
[ 2077.231406] ssb: Core 1 found: PCMCIA (cc 0x80D, rev 0x00, vendor 0x4243)
[ 2077.231413] ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x02, vendor 0x4243)
[ 2077.231420] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 2077.231427] ssb: Core 4 found: PCI (cc 0x804, rev 0x03, vendor 0x4243)
[ 2077.240278] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 2077.320208] cfg80211: Calling CRDA to update world regulatory domain
[ 2077.521671] Broadcom 43xx driver loaded [ Features: PNL ]
1 Γνώσεις Linux: Καθόλου ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Καθόλου
2 Ubuntu 12.04 precise 3.8.0-30-generic 32bit (el_GR.UTF-8, Unity ubuntu-2d), Ubuntu 3.8.0-29-generic
3 Intel Celeron CPU 2.80GHz ‖ RAM 1192 MiB ‖ Hewlett-Packard 089C - Hewlett-Packard Pavilion zv5000 (PB866EA#B1A)
4 Advanced Micro Devices, Inc. [AMD/ATI] RS300M [Mobility Radeon 9100 IGP] [1002:5835] {radeon}
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Uparis
babeTUX
babeTUX
 
Δημοσιεύσεις: 10
Εγγραφή: 07 Σεπ 2013, 19:38
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet