Πρόβλημα με την σύνδεση Wi-Fi(Επιλύθηκε)

[georgegr77]

Γειά σας παιδιά.Χρησιμοποιώ Ubuntu 8.04.Έχω το εξής πρόβλημα.Στο σπίτι έχω εγκαταστημένο router απ το οποίο μοιράζω το ιντερνετ σε 2 PC με καλώδιο LAN.Όταν όμως βγάζω το καλώδιο για να προσπαθήσω να συνδεθώ ασύρματα το "βλέπει" το σήμα αλλά δεν μπορώ να συνδεθώ με τίποτα.Έχω ψάξει τις ρυθμίσεις αλλά δεν μπορώ να βρώ τι άλλο χρειάζεται για να συνδεθεί? Να σας πώ ότι όταν είμαι συνδεδεμένος κανονικά με το καλώδιο το έχω στις αυτόματες ρυθμίσεις (δλδ δεν του περνάω τα IP κ.λ.π,).Τα βρίσκει μόνο του λόγω του ότι οι ρυθμίσεις αυτές του IP κτλ που είναι απαραίτητες έγιναν μια φορά όταν εγκαταστάθηκε το router και απο κεί και πέρα όποιο PC και να συνδεθεί τα παίρνει αυτόματα και συνδέεται χωρίς πρόβλημα όταν έχει καλώδιο.Αλλά με το Wi-Fi δεν "θέλει" με τίποτα να μπεί στο νετ.

[linuxman]

Για δώσε αποτέλεσμα τις εντολών

Κώδικας: Επιλογή όλων

lspci -nn

Κώδικας: Επιλογή όλων

ifconfig

Κώδικας: Επιλογή όλων

iwconfig

[linuxman]

Εντολή πρώτη:

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8600M GT [10de:0407] (rev a1)
03:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
03:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
03:09.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)
03:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
03:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff)
09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 01)

Εντολή δεύτερη:

Κώδικας: Επιλογή όλων

eth0 Link encap:Ethernet HWaddr 00:1d:09:52:14:bb
inet addr:192.168.1.102 Bcast:255.255.255.255 Mask:255.255.255.0
inet6 addr: fe80::21d:9ff:fe52:14bb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1529232 errors:0 dropped:0 overruns:0 frame:0
TX packets:1178256 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1913826214 (1.7 GB) TX bytes:531233920 (506.6 MB)
Interrupt:16

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4036 errors:0 dropped:0 overruns:0 frame:0
TX packets:4036 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:167486 (163.5 KB) TX bytes:167486 (163.5 KB)

wlan0 Link encap:Ethernet HWaddr 00:1f:e1:1a:49:24
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

wmaster0 Link encap:UNSPEC HWaddr 00-1F-E1-1A-49-24-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Εντολή Τρίτη:

Κώδικας: Επιλογή όλων

lo no wireless extensions.

eth0 no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

[linuxman]

Δοκίμασε να κάνεις την σύνδεση με ασύρματο έχοντας βγάλε το καλώδιο θα πρέπει να εμφανίζεται το δίκτυο σου με ένα όνομα πάνω δεξιά , πριν κάνεις την δοκιμή δες τι προστασία έχει , αν έχει WEP 64/128 άλλαξε την και βάλε το WPA or WPA2 η κάτι που να έχει WPA
Και όσο θα γίνεται δοκιμή από πριν πρέπει να έχεις ανοικτό το τερματικό να να πατήσεις το

Κώδικας: Επιλογή όλων

dmesg

Τα αποτελέσματα που θα σου βγάλε πόσταρε τα εδώ άλλα μέσα στα

Κώδικας: Επιλογή όλων

[code]εδώ[/code]

[georgegr77]

Για προστασία μου βγάζει μόνο WEP 128 bit passphrase
WEp 64/128 bit HEX
WEP 64/128 bit ASCII και τελευταίο LEAP

Κώδικας: Επιλογή όλων

[ 10.989173] PREFETCH window: disabled.
[ 10.989188] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.989192] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 10.989214] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.989219] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.989243] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 10.989248] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 10.989271] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.989276] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 10.989289] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 10.989298] NET: Registered protocol family 2
[ 11.026659] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.026831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 11.027165] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 11.027325] TCP: Hash tables configured (established 131072 bind 65536)
[ 11.027327] TCP reno registered
[ 11.038692] checking if image is initramfs... it is
[ 11.584321] Freeing initrd memory: 7327k freed
[ 11.584452] Simple Boot Flag at 0x79 set to 0x1
[ 11.584941] audit: initializing netlink socket (disabled)
[ 11.584953] audit(1234632124.329:1): initialized
[ 11.585121] highmem bounce pool size: 64 pages
[ 11.586625] VFS: Disk quotas dquot_6.5.1
[ 11.586684] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.586787] io scheduler noop registered
[ 11.586789] io scheduler anticipatory registered
[ 11.586790] io scheduler deadline registered
[ 11.586799] io scheduler cfq registered (default)
[ 11.586949] Boot video device is 0000:01:00.0
[ 11.587037] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 11.587068] assign_interrupt_mode Found MSI capability
[ 11.587094] Allocate Port Service[0000:00:01.0:pcie00]
[ 11.587122] Allocate Port Service[0000:00:01.0:pcie02]
[ 11.587189] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 11.587246] assign_interrupt_mode Found MSI capability
[ 11.587292] Allocate Port Service[0000:00:1c.0:pcie00]
[ 11.587316] Allocate Port Service[0000:00:1c.0:pcie02]
[ 11.587407] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 11.587465] assign_interrupt_mode Found MSI capability
[ 11.587510] Allocate Port Service[0000:00:1c.1:pcie00]
[ 11.587534] Allocate Port Service[0000:00:1c.1:pcie02]
[ 11.587626] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 11.587683] assign_interrupt_mode Found MSI capability
[ 11.587728] Allocate Port Service[0000:00:1c.4:pcie00]
[ 11.587753] Allocate Port Service[0000:00:1c.4:pcie02]
[ 11.587959] isapnp: Scanning for PnP cards...
[ 11.941758] isapnp: No Plug & Play device found
[ 11.961132] Real Time Clock Driver v1.12ac
[ 11.961243] hpet_resources: 0xfed00000 is busy
[ 11.961288] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 11.962366] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 11.962416] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 11.962486] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 11.980174] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 11.991516] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.991520] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 11.991522] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 11.991524] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 11.991526] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.005062] mice: PS/2 mouse device common for all mice
[ 12.005142] EISA: Probing bus 0 at eisa.0
[ 12.005150] Cannot allocate resource for EISA slot 1
[ 12.005178] EISA: Detected 0 cards.
[ 12.005180] cpuidle: using governor ladder
[ 12.005182] cpuidle: using governor menu
[ 12.005245] NET: Registered protocol family 1
[ 12.005265] Using IPI No-Shortcut mode
[ 12.005286] registered taskstats version 1
[ 12.005389] Magic number: 13:651:390
[ 12.005435] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 12.005436] EDD information not available.
[ 12.005601] Freeing unused kernel memory: 368k freed
[ 12.041988] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 13.174525] fuse init (API version 7.9)
[ 13.192497] ACPI: SSDT 7FE72CF6, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 13.192647] ACPI: SSDT 7FE7268C, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 13.193065] Monitor-Mwait will be used to enter C-1 state
[ 13.193067] Monitor-Mwait will be used to enter C-2 state
[ 13.193069] Monitor-Mwait will be used to enter C-3 state
[ 13.193161] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.193164] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 13.193328] ACPI: SSDT 7FE72F7C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 13.193465] ACPI: SSDT 7FE72C71, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 13.194044] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 13.194048] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 13.195082] ACPI: Thermal Zone [THM] (28 C)
[ 13.291305] usbcore: registered new interface driver usbfs
[ 13.291323] usbcore: registered new interface driver hub
[ 13.291351] usbcore: registered new device driver usb
[ 13.300235] USB Universal Host Controller Interface driver v3.0
[ 13.300281] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 13.300291] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 13.300295] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 13.300486] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 13.300516] uhci_hcd 0000:00:1a.0: irq 18, io base 0x00006f20
[ 13.300615] usb usb1: configuration #1 chosen from 1 choice
[ 13.300633] hub 1-0:1.0: USB hub found
[ 13.300636] hub 1-0:1.0: 2 ports detected
[ 13.402776] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19
[ 13.402790] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 13.402796] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 13.402814] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 13.402855] uhci_hcd 0000:00:1a.1: irq 19, io base 0x00006f00
[ 13.402946] usb usb2: configuration #1 chosen from 1 choice
[ 13.402965] hub 2-0:1.0: USB hub found
[ 13.402968] hub 2-0:1.0: 2 ports detected
[ 13.506631] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 20
[ 13.506644] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 13.506648] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 13.506669] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 13.510574] ehci_hcd 0000:00:1a.7: debug port 1
[ 13.510580] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 13.510588] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfed1c400
[ 13.523401] SCSI subsystem initialized
[ 13.523490] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.523569] usb usb3: configuration #1 chosen from 1 choice
[ 13.523590] hub 3-0:1.0: USB hub found
[ 13.523594] hub 3-0:1.0: 4 ports detected
[ 13.608655] libata version 3.00 loaded.
[ 13.627421] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
[ 13.627434] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 13.627437] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 13.627460] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 13.631364] ehci_hcd 0000:00:1d.7: debug port 1
[ 13.631370] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 13.631375] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfed1c000
[ 13.647284] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.647385] usb usb4: configuration #1 chosen from 1 choice
[ 13.647404] hub 4-0:1.0: USB hub found
[ 13.647408] hub 4-0:1.0: 6 ports detected
[ 13.751214] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 13.751224] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 13.751228] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.751249] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 13.751279] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006f80
[ 13.751371] usb usb5: configuration #1 chosen from 1 choice
[ 13.751390] hub 5-0:1.0: USB hub found
[ 13.751394] hub 5-0:1.0: 2 ports detected
[ 13.854031] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19
[ 13.854041] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 13.854044] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 13.854067] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 13.854094] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006f60
[ 13.854187] usb usb6: configuration #1 chosen from 1 choice
[ 13.854205] hub 6-0:1.0: USB hub found
[ 13.854209] hub 6-0:1.0: 2 ports detected
[ 13.957908] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 20
[ 13.957921] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 13.957927] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 13.957955] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 13.957985] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00006f40
[ 13.958091] usb usb7: configuration #1 chosen from 1 choice
[ 13.958109] hub 7-0:1.0: USB hub found
[ 13.958113] hub 7-0:1.0: 2 ports detected
[ 14.029686] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 14.062060] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 14.062077] PCI: Setting latency timer of device 0000:0b:00.0 to 64
[ 14.082356] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
[ 14.082379] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
[ 14.082393] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
[ 14.082411] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[ 14.121674] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
[ 14.122539] ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.175201] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f9bff800-f9bfffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 14.182624] ahci 0000:00:1f.2: version 3.0
[ 14.182647] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.182691] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match, using nr_ports
[ 14.182693] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
[ 14.203571] usb 3-1: configuration #1 chosen from 1 choice
[ 14.249310] Clocksource tsc unstable (delta = -1677782628 ns)
[ 14.265273] Time: hpet clocksource has been installed.
[ 14.372554] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 14.619283] usb 4-2: configuration #1 chosen from 1 choice
[ 14.829123] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 14.829128] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 14.829136] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 14.829377] scsi0 : ahci
[ 14.829517] scsi1 : ahci
[ 14.829641] scsi2 : ahci
[ 14.829832] ata1: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 219
[ 14.829836] ata2: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb980 irq 219
[ 14.829839] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 219
[ 14.849928] ieee1394: Host added: ID:BUS[0-00:1023] GUID[364fc0001c4c5470]
[ 14.872880] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 14.922471] ata1.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133
[ 14.922475] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 14.923443] ata1.00: configured for UDMA/133
[ 14.928424] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 14.943271] usb 6-1: configuration #1 chosen from 1 choice
[ 14.958701] ata2: SATA link down (SStatus 0 SControl 0)
[ 14.971016] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 14.980767] ata3: SATA link down (SStatus 0 SControl 300)
[ 14.980952] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5
[ 14.981205] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.981236] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 14.981248] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 14.984760] ata_piix 0000:00:1f.1: version 2.12
[ 14.984771] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.984793] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 14.985124] scsi3 : ata_piix
[ 14.985437] scsi4 : ata_piix
[ 14.985922] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 14.985924] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 14.990606] Driver 'sd' needs updating - please use bus_type methods
[ 14.992895] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 14.992911] sd 0:0:0:0: [sda] Write Protect is off
[ 14.992914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.992936] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.992996] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 14.993011] sd 0:0:0:0: [sda] Write Protect is off
[ 14.993013] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.993025] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.993028] sda:<6>usb 7-2: configuration #1 chosen from 1 choice
[ 15.024581] hub 7-2:1.0: USB hub found
[ 15.026523] hub 7-2:1.0: 3 ports detected
[ 15.043783] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 15.085752] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.089364] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.132752] usbcore: registered new interface driver libusual
[ 15.132819] usbcore: registered new interface driver hiddev
[ 15.136842] Initializing USB Mass Storage driver...
[ 15.300814] ata4.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD05, max UDMA/33
[ 15.372149] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 15.473383] ata4.00: configured for UDMA/33
[ 15.473469] ata5: port disabled. ignoring.
[ 15.474621] scsi 3:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640A JD05 PQ: 0 ANSI: 5
[ 15.474707] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 15.480465] Driver 'sr' needs updating - please use bus_type methods
[ 15.487598] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 15.487603] Uniform CD-ROM driver Revision: 3.20
[ 15.487659] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 15.552938] usb 1-2: configuration #1 chosen from 1 choice
[ 15.606611] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb4/4-2/4-2:1.1/input/input2
[ 15.606643] input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-2
[ 15.606696] scsi5 : SCSI emulation for USB Mass Storage devices
[ 15.606733] usb-storage: device found at 2
[ 15.606734] usb-storage: waiting for device to settle before scanning
[ 15.620422] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input3
[ 15.632714] input,hidraw1: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.1-1
[ 15.714156] usb 7-2.1: new full speed USB device using uhci_hcd and address 3
[ 15.759760] usb 7-2.1: configuration #1 chosen from 1 choice
[ 15.852552] usb 7-2.2: new full speed USB device using uhci_hcd and address 4
[ 15.898020] usb 7-2.2: configuration #1 chosen from 1 choice
[ 15.980205] usb 7-2.3: new full speed USB device using uhci_hcd and address 5
[ 16.025102] usb 7-2.3: configuration #1 chosen from 1 choice
[ 16.031397] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input4
[ 16.042909] input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2
[ 16.047995] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input5
[ 16.061257] input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3
[ 16.061288] usbcore: registered new interface driver usb-storage
[ 16.061292] usbcore: registered new interface driver usbhid
[ 16.061294] USB Mass Storage support registered.
[ 16.061306] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 16.111328] Attempting manual resume
[ 16.111331] swsusp: Resume From Partition 8:7
[ 16.111333] PM: Checking swsusp image.
[ 16.111511] PM: Resume from disk failed.
[ 16.161478] kjournald starting. Commit interval 5 seconds
[ 16.161509] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.038325] usb-storage: device scan complete
[ 20.055655] scsi 5:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
[ 20.077839] sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 20.091563] sd 5:0:0:0: [sdb] Write Protect is off
[ 20.091568] sd 5:0:0:0: [sdb] Mode Sense: 10 00 00 00
[ 20.091571] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 20.114148] sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 20.127376] sd 5:0:0:0: [sdb] Write Protect is off
[ 20.127380] sd 5:0:0:0: [sdb] Mode Sense: 10 00 00 00
[ 20.127383] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 20.127387] sdb: sdb1
[ 20.506397] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 20.506422] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 26.220211] Linux agpgart interface v0.102
[ 26.376231] iTCO_vendor_support: vendor-support=0
[ 26.378483] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 26.378546] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 26.378583] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 26.412912] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 26.425600] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.520811] input: Lid Switch as /devices/virtual/input/input6
[ 26.663278] ACPI: Lid Switch [LID]
[ 26.663321] input: Power Button (CM) as /devices/virtual/input/input7
[ 26.684415] ACPI: Power Button (CM) [PBTN]
[ 26.684473] input: Sleep Button (CM) as /devices/virtual/input/input8
[ 26.716346] ACPI: Sleep Button (CM) [SBTN]
[ 26.716500] ACPI: AC Adapter [AC] (on-line)
[ 26.716522] ACPI: WMI-Acer: Mapper loaded
[ 26.764784] ACPI: Battery Slot [BAT0] (battery present)
[ 26.877072] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 26.877074] ricoh-mmc: Copyright(c) Philip Langdale
[ 26.877108] ricoh-mmc: Ricoh MMC controller found at 0000:03:09.2 [1180:0843] (rev 12)
[ 26.877120] ricoh-mmc: Controller is now disabled.
[ 26.889073] sdhci: Secure Digital Host Controller Interface driver
[ 26.889075] sdhci: Copyright(c) Pierre Ossman
[ 26.889108] sdhci: SDHCI controller found at 0000:03:09.1 [1180:0822] (rev 22)
[ 26.889135] ACPI: PCI Interrupt 0000:03:09.1[B] -> GSI 18 (level, low) -> IRQ 21
[ 26.889185] mmc0: SDHCI at 0xf9bff400 irq 21 DMA
[ 27.112482] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 27.112497] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 27.112527] sky2 0000:09:00.0: v1.20 addr 0xf9ffc000 irq 16 Yukon-FE+ (0xb8) rev 0
[ 27.112906] sky2 eth0: addr 00:1d:09:52:14:bb
[ 27.123270] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input9
[ 27.152587] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 27.353178] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
[ 27.353195] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 27.442588] Linux video capture interface: v2.00
[ 27.738125] nvidia: module license 'NVIDIA' taints kernel.
[ 28.011786] Bluetooth: Core ver 2.11
[ 28.020988] NET: Registered protocol family 31
[ 28.020990] Bluetooth: HCI device and connection manager initialized
[ 28.020993] Bluetooth: HCI socket layer initialized
[ 28.054441] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.054451] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 28.054548] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 28.118702] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 28.136039] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[ 28.136504] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 28.158819] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 28.186980] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 28.193605] usbcore: registered new interface driver uvcvideo
[ 28.193608] USB Video Class driver (v0.1.0)
[ 28.246168] Bluetooth: HCI USB driver ver 2.9
[ 28.248397] usbcore: registered new interface driver hci_usb
[ 28.358649] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 28.456418] b43-phy0: Broadcom 4311 WLAN found
[ 28.498171] b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8
[ 28.498199] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 28.522561] phy0: Selected rate control algorithm 'simple'
[ 28.554430] atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
[ 28.554434] atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
[ 28.557419] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 28.757172] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 29.202047] lp: driver loaded but no devices found
[ 29.284780] Adding 2192832k swap on /dev/sda7. Priority:-1 extents:1 across:2192832k
[ 29.811927] EXT3 FS on sda6, internal journal
[ 30.894468] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.355946] No dock devices found.
[ 32.529426] apm: BIOS not found.
[ 34.606807] ppdev: user-space parallel port driver
[ 34.783143] audit(1234624951.723:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5496 profile="/usr/sbin/cupsd" namespace="default"
[ 35.042871] NET: Registered protocol family 10
[ 35.043724] lo: Disabled Privacy Extensions
[ 36.303023] input: b43-phy0 as /devices/virtual/input/input11
[ 36.372165] Bluetooth: L2CAP ver 2.9
[ 36.372174] Bluetooth: L2CAP socket layer initialized
[ 36.454551] Bluetooth: RFCOMM socket layer initialized
[ 36.454570] Bluetooth: RFCOMM TTY layer initialized
[ 36.454573] Bluetooth: RFCOMM ver 1.8
[ 36.583592] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 37.933869] b43-phy0 debug: Chip initialized
[ 37.934135] b43-phy0 debug: 32-bit DMA initialized
[ 37.953590] Registered led device: b43-phy0:tx
[ 37.953611] Registered led device: b43-phy0:rx
[ 37.953631] Registered led device: b43-phy0:radio
[ 37.953724] b43-phy0 debug: Wireless interface started
[ 37.953728] b43-phy0 debug: Adding Interface type 2
[ 37.956677] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.421696] sky2 eth0: enabling interface
[ 40.425888] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.440160] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 41.444427] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 41.863344] NET: Registered protocol family 17
[ 50.377073] eth0: no IPv6 routers present
[ 50.441287] CPU0 attaching NULL sched-domain.
[ 50.441291] CPU1 attaching NULL sched-domain.
[ 50.464971] CPU0 attaching sched-domain:
[ 50.464977] domain 0: span 03
[ 50.464979] groups: 01 02
[ 50.464984] CPU1 attaching sched-domain:
[ 50.464986] domain 0: span 03
[ 50.464988] groups: 02 01
[ 71.605934] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 212.037416] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 212.211372] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 212.413571] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 212.428000] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 212.622906] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 212.823558] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 213.887395] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 213.968981] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 214.167151] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 215.467945] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 216.742760] printk: 8 messages suppressed.
[ 216.742770] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 219.129213] printk: 9 messages suppressed.
[ 219.129219] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 225.692674] printk: 3 messages suppressed.
[ 225.692678] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 225.893343] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 228.248483] printk: 1 messages suppressed.
[ 228.248494] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 232.049308] printk: 2 messages suppressed.
[ 232.049324] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 232.118550] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 391.064183] sky2 eth0: Link is down.
[ 875.914555] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 875.918702] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 889.006399] eth0: no IPv6 routers present
[ 1000.658648] sky2 eth0: Link is down.


[linuxman]

Δοκίμασε να κλείσεις την προστασία και να συνδεθείς έτσι , αν γίνει τότε είναι οκ, και μετά δοκιμάζεις να βάλεις την προστασία ξανά και δοκιμή να συνδεθείς .

[georgegr77]

Δεν ξέρω πώς κλείνει η προστασία

[linuxman]

Δεν ξέρω πώς κλείνει η προστασία

Από το Firefox στην http://192.168.1.1 θα μπεις στο Interface ρούτερ και θα ψάξεις εκεί που είναι να την κάνεις disable .

[georgegr77]

Δεν μπορώ να μπώ εκεί επειδή μου ζητά ονομα και κωδικό και εχω την εντύπωση οτι αυτοί απ τον internet provider που μου συνδέσαν το ρουτερ τα έχουν αυτά.Οπότε μαλλον θα χρειαστεί να τους φωνάξω να έρθυν να το κάνουν.Δεν ξέρω τι να πω.Ευχαριστώ για την βοήθεια παντως

[ark@s]

δοκίμασε να δώσεις admin, admin για να μπεις στο interface του router και μετά αν θες τα αλλάζεις....