Atheros Communications Inc. AR242x 802.11abg Wireless PCI Ex

[panagiotispoyls]

07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)

λοιπόν βάλε 9.04 και δουλευει η κάρτα κατευθειαν. Είναι δοκιμασμενη.

καλημερα.

λοιπόν εκανα αλλαγη απο gnome σε kde ,και είχα πρόβλημα με το ασυρματο,είναι αυτη η ίδια καρτα που συζητάμε

Κώδικας: Επιλογή όλων

panos@art:~$ lspci -nn
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 671MX [1039:0671]
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) [1039:0003]
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] [1039:0968] (rev 01)
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01)
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f)
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f)
00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002]
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02)
00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] SATA Controller / IDE mode [1039:1183] (rev 03)
00:06.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a]
00:07.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a]
00:0f.0 Audio device [0403]: Silicon Integrated Systems [SiS] Azalia Audio Controller [1039:7502]
00:1f.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:0004]
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter [1039:6351] (rev 10)
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 04)


ακολούθησα τα βήματα http://ubuntuforums.org/showpost.php?p=5711824&postcount=6 όπως είχα κάνει ΚΑΙ την πρώτη φορά που έβαλα ubuntu και δεν είχα προβλημα κανένα .τώρα βρίσκει δίκτυα ασύρματα αλλά όταν πατάω σύνδεση ,όταν γράφω το κλειδί wep στο παράθυρο που εμφανίζεται ,πατάω οκ και τιποτα δεν γίνετε ,το πολυ πολυ να μου ξαναζητήσει κωδικό κλειδί η φράση,επιλέγω κλειδί βάζω το ΣΩΣΤΟ ,φαίνεται να συνδέεται για 5 δευτερόλεπτα και μετά τπτ ή μου λέει " connection on interface wlan0 FAILED"
εχει κανείς καμιά ιδέα τ μπορεί να φταίει? κάτι φταίει ,κάποιοα ρύθμιση που δεν έχω κάνει;

πανντως μόνο με εγκατάσταση του 9.04 εμένα δεν δούλεψε στο kubuntu ,έπρεπε να εγκαταστήσω τον οδηγό .

Κώδικας: Επιλογή όλων

panos@art:~$ iwconfig
lo no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11bg ESSID:"awmn-milos74-ap"
Mode:Managed Frequency:2.417 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

eth0 no wireless extensions.

pan0 no wireless extensions.


και κάτι ακόμη όταν είχα ubuntu και εγκατέστησσα αυτό τον driver στις διεπαφές μου έβγαζε "ath0" , "wifi0"
ενώ από χτές κ μετά την αλλαγή σε kubuntu και την επανεγκατάσταση του ίδιου ακριβώς driver το interface άλλαξε σε -" wmaster0" k "wlan0"

Κώδικας: Επιλογή όλων

panos@art:~$ iwlist scan
lo Interface doesn't support scanning.

wmaster0 Interface doesn't support scanning.

wlan0 Scan completed :
Cell 01 - Address: 00:0B:6B:80:B2:68
ESSID:"awmn-milos74-ap"
Mode:Master
Channel:2
Frequency:2.417 GHz (Channel 2)
Quality=9/100 Signal level:-95 dBm Noise level=-101 dBm
Encryption key:off
IE: Unknown: 000F61776D6E2D6D696C6F7337342D6170
IE: Unknown: 010482040B16
IE: Unknown: 030102
IE: Unknown: DD26000C42000000011E000000001B660902FF0F3030304236423830423236380000000000000000
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
Extra:tsf=000000fd215f9181
Extra: Last beacon: 84ms ago

eth0 Interface doesn't support scanning.

pan0 Interface doesn't support scanning.


ο network manager βρισκει και άλλα δικτυα ενω με

Κώδικας: Επιλογή όλων

iwlist scan

ό,τι βλέπεται παραπάνω
μάλλον θέλει ψάξιμο?
δείτε κ εδώ δεν ξέρω αν παίζει ρόλο ,αλλα νομίζω πως ναι

Κώδικας: Επιλογή όλων

panos@art:~$ iwlist rate
lo no bit-rate information.

wmaster0 no bit-rate information.

wlan0 unknown bit-rate information.

eth0 no bit-rate information.

pan0 no bit-rate information.


sorry αν κατι δεν είναι αντιληπτό,περιμένω μια βοήθεια,γιατί εχτές έφαγα πολύ ενέργεια στο να φτιάξω τα γραφικά αλλα άξιζε τον κόπο μια και στο gnome είχα ανάλυση 1200/768 , τώρα πέτυχα την εκπληκτική 1200/800 που είναι και η μέγιστη ανάλυση ,της ΦΑΝΤΑΣΤΙΚΗΣ καρτας γραφικών που έχω.
ΕΥΧΑΡΙΣΤΩ ΠΡΟΚΑΤΑΒΟΛΙΚΑ .

[logari81]

η κάρτα έπρεπε να δουλευει σε 9.04 out of the box με το τον οδηγο ath5k. Εσυ εγκατεστησες τώρα κάποιον παλαιότερο οδηγό. Έμενα αυτό που θα με ενδιέφερε θα ήταν τα αποτελεσματα των εντολών

Κώδικας: Επιλογή όλων

iwconfig
sudo iwlist
dmesg

πριν του βάλεις χέρι. Τώρα αν θελεις να βοηθησεις να βρουμε λύση με τον ath5k ξεκίνα απο LiveCD και τρεξε τις 3 παραπανω εντολες και ποσταρε τες εδω.

[panagiotispoyls]

η κάρτα έπρεπε να δουλευει σε 9.04 out of the box με το τον οδηγο ath5k. Εσυ εγκατεστησες τώρα κάποιον παλαιότερο οδηγό. Έμενα αυτό που θα με ενδιέφερε θα ήταν τα αποτελεσματα των εντολών

Κώδικας: Επιλογή όλων

iwconfig
sudo iwlist
dmesg

πριν του βάλεις χέρι. Τώρα αν θελεις να βοηθησεις να βρουμε λύση με τον ath5k ξεκίνα απο LiveCD και τρεξε τις 3 παραπανω εντολες και ποσταρε τες εδω.

Την έκανα τη βλακεία,ε; βιάστηκα,αλλα είπΑ να κάνω ότι και την πρώτη φορά ,αφού δούλεψε
λοιπόν ξεκινώ απο live usb και ποστάρω σε 2 λεπτά τα αποτελέσματα.

[panagiotispoyls]

Κώδικας: Επιλογή όλων

iw config

Κώδικας: Επιλογή όλων

lo no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11bg ESSID:"awmn-milos74-ap"
Mode:Managed Frequency:2.417 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

eth0 no wireless extensions.

pan0 no wireless extensions.

Κώδικας: Επιλογή όλων

sudo iwlist

Κώδικας: Επιλογή όλων

Usage: iwlist [interface] scanning [essid NNN] [last]
[interface] frequency
[interface] channel
[interface] bitrate
[interface] rate
[interface] encryption
[interface] keys
[interface] power
[interface] txpower
[interface] retry
[interface] ap
[interface] accesspoints
[interface] peers
[interface] event
[interface] auth
[interface] wpakeys
[interface] genie
[interface] modulation


Κώδικας: Επιλογή όλων

dmesg

Κώδικας: Επιλογή όλων

[ 0.000000] BIOS EBDA/lowmem at: 0009dc00/0009dc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006fd90000 (usable)
[ 0.000000] BIOS-e820: 000000006fd90000 - 000000006fd9f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006fd9f000 - 000000006fda0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fda0000 - 0000000070000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x6fd90 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000090c00 (usable)
[ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000006fd90000 (usable)
[ 0.000000] modified: 000000006fd90000 - 000000006fd9f000 (ACPI data)
[ 0.000000] modified: 000000006fd9f000 - 000000006fda0000 (ACPI NVS)
[ 0.000000] modified: 000000006fda0000 - 0000000070000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 6f62c000 - 6fd8f1f0
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fe41f0
[ 0.000000] Move RAMDISK from 000000006f62c000 - 000000006fd8f1ef to 00881000 - 00fe41ef
[ 0.000000] ACPI: RSDP 000F88D0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 6FD970FB, 0094 (r1 FSC PC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 6FD9ECC4, 00F4 (r3 SiS 671MX 6040000 PTL F4240)
[ 0.000000] ACPI: DSDT 6FD9B1AC, 3AA4 (r1 IEC___ Z17M2.0_ 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS 6FD9FFC0, 0040
[ 0.000000] ACPI: SLIC 6FD9EDB8, 0176 (r1 FSC PC 6040000 PTL_ 0)
[ 0.000000] ACPI: APIC 6FD9EF2E, 005E (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 6FD9EF8C, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET 6FD9EFC8, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 6FD98A33, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6FD9898D, 00A6 (r1 PmRef Cpu7Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6FD988E7, 00A6 (r1 PmRef Cpu6Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6FD98841, 00A6 (r1 PmRef Cpu5Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6FD9879B, 00A6 (r1 PmRef Cpu4Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6FD986F5, 00A6 (r1 PmRef Cpu3Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6FD9864F, 00A6 (r1 PmRef Cpu2Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6FD985A9, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6FD9718F, 141A (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] ACPI: DMI BIOS year==0, assuming ACPI-capable machine
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 905MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fe41f0] NEW RAMDISK ==> [0000881000 - 0000fe41f0]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f8950] 000f8950
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0006fd90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000090
[ 0.000000] 0: 0x00000100 -> 0x0006fd90
[ 0.000000] On node 0 totalpages: 458003
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3939 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1812 pages used for memmap
[ 0.000000] HighMem zone: 230014 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10398201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000090000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 78000000 (gap: 70000000:70000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454423
[ 0.000000] Kernel command line: initrd=/ubninit file=/cdrom/preseed/kubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/ubnkern
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2164.893 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 9162560 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1791756k/1832512k available (4126k kernel code, 39480k reserved, 2208k data, 532k init, 927304k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4329.78 BogoMIPS (lpj=8659572)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018522] ACPI: Core revision 20080926
[ 0.020594] ACPI: Checking initramfs for custom DSDT
[ 0.304379] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.344729] CPU0: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz stepping 0d
[ 0.348001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4329.88 BogoMIPS (lpj=8659765)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.432527] CPU1: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz stepping 0d
[ 0.432542] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.436047] Brought up 2 CPUs
[ 0.436050] Total of 2 processors activated (8659.66 BogoMIPS).
[ 0.436091] CPU0 attaching sched-domain:
[ 0.436093] domain 0: span 0-1 level MC
[ 0.436096] groups: 0 1
[ 0.436102] CPU1 attaching sched-domain:
[ 0.436104] domain 0: span 0-1 level MC
[ 0.436106] groups: 1 0
[ 0.436183] net_namespace: 776 bytes
[ 0.436183] Booting paravirtualized kernel on bare hardware
[ 0.436334] Time: 17:04:01 Date: 04/29/09
[ 0.436334] regulator: core version 0.5
[ 0.436334] NET: Registered protocol family 16
[ 0.436334] EISA bus registered
[ 0.436334] ACPI: bus type pci registered
[ 0.436334] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 3
[ 0.436334] PCI: MCFG area at e0000000 reserved in E820
[ 0.436334] PCI: Using MMCONFIG for extended config space
[ 0.436334] PCI: Using configuration type 1 for base access
[ 0.437082] ACPI: EC: Look up EC in DSDT
[ 0.442391] ACPI: Interpreter enabled
[ 0.442396] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.442412] ACPI: Using IOAPIC for interrupt routing
[ 0.442901] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.449239] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.449242] ACPI: EC: driver started in interrupt mode
[ 0.449341] ACPI: No dock devices found.
[ 0.449353] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.449401] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd3ffffff]
[ 0.449546] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
[ 0.449553] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
[ 0.449560] pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
[ 0.449566] pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
[ 0.449573] pci 0000:00:02.5: reg 20 io port: [0x1000-0x100f]
[ 0.449593] pci 0000:00:02.5: PME# supported from D3cold
[ 0.449597] pci 0000:00:02.5: PME# disabled
[ 0.449622] pci 0000:00:03.0: reg 10 32bit mmio: [0xd4204000-0xd4204fff]
[ 0.449671] pci 0000:00:03.1: reg 10 32bit mmio: [0xd4205000-0xd4205fff]
[ 0.449739] pci 0000:00:03.3: reg 10 32bit mmio: [0xd4206000-0xd4206fff]
[ 0.449776] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.449780] pci 0000:00:03.3: PME# disabled
[ 0.449819] pci 0000:00:04.0: reg 10 32bit mmio: [0xd4407000-0xd440707f]
[ 0.449826] pci 0000:00:04.0: reg 14 io port: [0x1080-0x10ff]
[ 0.449858] pci 0000:00:04.0: supports D1 D2
[ 0.449860] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449864] pci 0000:00:04.0: PME# disabled
[ 0.449896] pci 0000:00:05.0: reg 10 io port: [0x1058-0x105f]
[ 0.449903] pci 0000:00:05.0: reg 14 io port: [0x104c-0x104f]
[ 0.449909] pci 0000:00:05.0: reg 18 io port: [0x1050-0x1057]
[ 0.449916] pci 0000:00:05.0: reg 1c io port: [0x1048-0x104b]
[ 0.449922] pci 0000:00:05.0: reg 20 io port: [0x1020-0x102f]
[ 0.449942] pci 0000:00:05.0: PME# supported from D3cold
[ 0.449946] pci 0000:00:05.0: PME# disabled
[ 0.450005] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.450009] pci 0000:00:06.0: PME# disabled
[ 0.450074] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.450078] pci 0000:00:07.0: PME# disabled
[ 0.450127] pci 0000:00:0f.0: reg 10 32bit mmio: [0xd4200000-0xd4203fff]
[ 0.450165] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[ 0.450168] pci 0000:00:0f.0: PME# disabled
[ 0.450237] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold
[ 0.450241] pci 0000:00:1f.0: PME# disabled
[ 0.450287] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
[ 0.450292] pci 0000:01:00.0: reg 14 32bit mmio: [0xd4000000-0xd401ffff]
[ 0.450298] pci 0000:01:00.0: reg 18 io port: [0x9000-0x907f]
[ 0.450319] pci 0000:01:00.0: supports D1 D2
[ 0.450357] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.450361] pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd40fffff]
[ 0.450365] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.450433] pci 0000:02:00.0: reg 10 64bit mmio: [0xd4100000-0xd410ffff]
[ 0.450561] pci 0000:00:06.0: bridge 32bit mmio: [0xd4100000-0xd41fffff]
[ 0.450620] pci 0000:00:07.0: bridge io port: [0x3000-0x4fff]
[ 0.450624] pci 0000:00:07.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
[ 0.450703] bus 00 -> node 0
[ 0.450708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.457796] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
[ 0.457905] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11)
[ 0.458011] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11)
[ 0.458115] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[ 0.458242] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
[ 0.458345] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11)
[ 0.458449] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11)
[ 0.458552] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 0.458817] ACPI: WMI: Mapper loaded
[ 0.458851] SCSI subsystem initialized
[ 0.458851] libata version 3.00 loaded.
[ 0.458851] usbcore: registered new interface driver usbfs
[ 0.458851] usbcore: registered new interface driver hub
[ 0.458851] usbcore: registered new device driver usb
[ 0.458851] PCI: Using ACPI for IRQ routing
[ 0.464009] Bluetooth: Core ver 2.13
[ 0.464022] NET: Registered protocol family 31
[ 0.464022] Bluetooth: HCI device and connection manager initialized
[ 0.464022] Bluetooth: HCI socket layer initialized
[ 0.464022] NET: Registered protocol family 8
[ 0.464023] NET: Registered protocol family 20
[ 0.464033] NetLabel: Initializing
[ 0.464035] NetLabel: domain hash size = 128
[ 0.464036] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.464049] NetLabel: unlabeled traffic allowed by default
[ 0.464062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.464066] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.468060] AppArmor: AppArmor Filesystem Enabled
[ 0.476007] pnp: PnP ACPI init
[ 0.476016] ACPI: bus type pnp registered
[ 0.479480] pnp: PnP ACPI: found 10 devices
[ 0.479482] ACPI: ACPI bus type pnp unregistered
[ 0.479486] PnPBIOS: Disabled by ACPI PNP
[ 0.479495] system 00:04: ioport range 0x8000-0x80be has been reserved
[ 0.479498] system 00:04: ioport range 0x8100-0x812f has been reserved
[ 0.479500] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.479503] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.479505] system 00:04: ioport range 0x200-0x20f has been reserved
[ 0.479507] system 00:04: ioport range 0x260-0x261 has been reserved
[ 0.479510] system 00:04: ioport range 0x400-0x40f has been reserved
[ 0.479513] system 00:04: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.479515] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.479518] system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.479520] system 00:04: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.479523] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[ 0.479525] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
[ 0.479528] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.500585] Switched to high resolution mode on CPU 1
[ 0.504004] Switched to high resolution mode on CPU 0
[ 0.514198] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.514201] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.514206] pci 0000:00:01.0: MEM window: 0xd4000000-0xd40fffff
[ 0.514210] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.514217] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[ 0.514218] pci 0000:00:06.0: IO window: disabled
[ 0.514224] pci 0000:00:06.0: MEM window: 0xd4100000-0xd41fffff
[ 0.514228] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.514234] pci 0000:00:07.0: PCI bridge, secondary bus 0000:4d
[ 0.514237] pci 0000:00:07.0: IO window: 0x3000-0x4fff
[ 0.514243] pci 0000:00:07.0: MEM window: 0xdc000000-0xdfffffff
[ 0.514247] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.514253] pci 0000:00:1f.0: PCI bridge, secondary bus 0000:04
[ 0.514255] pci 0000:00:1f.0: IO window: disabled
[ 0.514260] pci 0000:00:1f.0: MEM window: disabled
[ 0.514264] pci 0000:00:1f.0: PREFETCH window: disabled
[ 0.514277] pci 0000:00:01.0: setting latency timer to 64
[ 0.514287] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.514291] pci 0000:00:06.0: setting latency timer to 64
[ 0.514299] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.514303] pci 0000:00:07.0: setting latency timer to 64
[ 0.514312] pci 0000:00:1f.0: setting latency timer to 64
[ 0.514316] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.514318] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.514320] bus: 01 index 0 io port: [0x9000-0x9fff]
[ 0.514322] bus: 01 index 1 mmio: [0xd4000000-0xd40fffff]
[ 0.514324] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
[ 0.514325] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.514327] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.514329] bus: 02 index 1 mmio: [0xd4100000-0xd41fffff]
[ 0.514330] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.514332] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.514334] bus: 4d index 0 io port: [0x3000-0x4fff]
[ 0.514336] bus: 4d index 1 mmio: [0xdc000000-0xdfffffff]
[ 0.514337] bus: 4d index 2 mmio: [0x0-0x0]
[ 0.514339] bus: 4d index 3 mmio: [0x0-0x0]
[ 0.514341] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.514342] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.514344] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.514345] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.514353] NET: Registered protocol family 2
[ 0.528049] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.528276] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.528828] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.529165] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.529168] TCP reno registered
[ 0.536074] NET: Registered protocol family 1
[ 0.536193] checking if image is initramfs... it is
[ 1.109307] Freeing initrd memory: 7564k freed
[ 1.109574] cpufreq: No nForce2 chipset.
[ 1.109745] audit: initializing netlink socket (disabled)
[ 1.109785] type=2000 audit(1241024641.109:1): initialized
[ 1.116475] highmem bounce pool size: 64 pages
[ 1.116480] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.117774] VFS: Disk quotas dquot_6.5.1
[ 1.117831] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.118412] fuse init (API version 7.10)
[ 1.118495] msgmni has been set to 1704
[ 1.118684] alg: No test for stdrng (krng)
[ 1.118696] io scheduler noop registered
[ 1.118698] io scheduler anticipatory registered
[ 1.118699] io scheduler deadline registered
[ 1.118711] io scheduler cfq registered (default)
[ 1.118782] pci 0000:01:00.0: Boot video device
[ 1.123556] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.123611] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.123646] pcieport-driver 0000:00:06.0: irq 2303 for MSI/MSI-X
[ 1.123659] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.123732] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.123783] pcieport-driver 0000:00:07.0: found MSI capability
[ 1.123812] pcieport-driver 0000:00:07.0: irq 2302 for MSI/MSI-X
[ 1.123824] pci_express 0000:00:07.0:pcie00: allocate port service
[ 1.123841] pci_express 0000:00:07.0:pcie02: allocate port service
[ 1.123908] pcieport-driver 0000:00:1f.0: setting latency timer to 64
[ 1.123949] pcieport-driver 0000:00:1f.0: found MSI capability
[ 1.123978] pcieport-driver 0000:00:1f.0: irq 2301 for MSI/MSI-X
[ 1.123992] pci_express 0000:00:1f.0:pcie00: allocate port service
[ 1.124072] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.124175] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.125829] ACPI: AC Adapter [ADP0] (on-line)
[ 1.127770] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.127844] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.127847] ACPI: Power Button (FF) [PWRF]
[ 1.127887] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.129944] ACPI: Lid Switch [LID0]
[ 1.129993] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.129996] ACPI: Power Button (CM) [PWRB]
[ 1.130037] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.130042] ACPI: Sleep Button (CM) [SLPB]
[ 1.130679] ACPI: SSDT 6FD9954D, 0261 (r1 PmRef Cpu0Ist 3000 INTL 20050228)
[ 1.132060] ACPI: SSDT 6FD98C92, 0518 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
[ 1.133896] Monitor-Mwait will be used to enter C-1 state
[ 1.133899] Monitor-Mwait will be used to enter C-2 state
[ 1.133926] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.133961] processor ACPI_CPU:00: registered as cooling_device0
[ 1.133966] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.134422] ACPI: SSDT 6FD997AE, 01F2 (r1 PmRef Cpu1Ist 3000 INTL 20050228)
[ 1.134751] ACPI: SSDT 6FD991AA, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)
[ 1.135251] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.135269] processor ACPI_CPU:01: registered as cooling_device1
[ 1.135272] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.138216] isapnp: Scanning for PnP cards...
[ 1.491544] isapnp: No Plug & Play device found
[ 1.505206] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.506142] brd: module loaded
[ 1.506417] loop: module loaded
[ 1.506477] Fixed MDIO Bus: probed
[ 1.506482] PPP generic driver version 2.4.2
[ 1.506535] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.506564] Driver 'sd' needs updating - please use bus_type methods
[ 1.506573] Driver 'sr' needs updating - please use bus_type methods
[ 1.506707] sata_sis 0000:00:05.0: version 1.0
[ 1.506725] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.506730] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[ 1.506822] scsi0 : sata_sis
[ 1.506907] scsi1 : sata_sis
[ 1.507338] ata1: PATA max UDMA/133 cmd 0x1058 ctl 0x104c bmdma 0x1020 irq 17
[ 1.507341] ata2: PATA max UDMA/133 cmd 0x1050 ctl 0x1048 bmdma 0x1028 irq 17
[ 1.668226] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[ 1.668229] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.684234] ata1.00: configured for UDMA/133
[ 1.850807] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5
[ 1.850893] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 1.850908] sd 0:0:0:0: [sda] Write Protect is off
[ 1.850910] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.850932] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.850991] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 1.851004] sd 0:0:0:0: [sda] Write Protect is off
[ 1.851006] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.851027] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.851030] sda: sda1 sda2 < sda5 >
[ 1.885135] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.885176] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.885559] pata_sis 0000:00:02.5: version 0.5.2
[ 1.885568] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.885654] scsi2 : pata_sis
[ 1.885704] scsi3 : pata_sis
[ 1.885990] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
[ 1.885992] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
[ 2.048233] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JW02, max UDMA/33
[ 2.064251] ata3.00: configured for UDMA/33
[ 2.066549] ata4: port disabled. ignoring.
[ 2.069638] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40N JW02 PQ: 0 ANSI: 5
[ 2.080641] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.080644] Uniform CD-ROM driver Revision: 3.20
[ 2.080731] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.080764] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.080857] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.080875] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.080893] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 2.080959] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 2.080991] ehci_hcd 0000:00:03.3: debug port 1
[ 2.081009] ehci_hcd 0000:00:03.3: irq 22, io mem 0xd4206000
[ 2.092008] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 2.092087] usb usb1: configuration #1 chosen from 1 choice
[ 2.092111] hub 1-0:1.0: USB hub found
[ 2.092117] hub 1-0:1.0: 8 ports detected
[ 2.092214] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.092228] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.092237] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 2.092272] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 2.092287] ohci_hcd 0000:00:03.0: irq 20, io mem 0xd4204000
[ 2.148067] usb usb2: configuration #1 chosen from 1 choice
[ 2.148089] hub 2-0:1.0: USB hub found
[ 2.148097] hub 2-0:1.0: 4 ports detected
[ 2.148168] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.148177] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 2.148213] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 2.148227] ohci_hcd 0000:00:03.1: irq 21, io mem 0xd4205000
[ 2.206044] usb usb3: configuration #1 chosen from 1 choice
[ 2.206066] hub 3-0:1.0: USB hub found
[ 2.206075] hub 3-0:1.0: 4 ports detected
[ 2.206150] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.206193] usbcore: registered new interface driver libusual
[ 2.206219] usbcore: registered new interface driver usbserial
[ 2.206229] USB Serial support registered for generic
[ 2.206242] usbcore: registered new interface driver usbserial_generic
[ 2.206244] usbserial: USB Serial Driver core
[ 2.206290] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.210063] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.212371] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.212377] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.212379] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.212381] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.212384] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.216035] mice: PS/2 mouse device common for all mice
[ 2.236058] rtc_cmos 00:02: RTC can wake from S4
[ 2.236093] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.236114] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.236165] device-mapper: uevent: version 1.0.3
[ 2.236248] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.236315] device-mapper: multipath: version 1.0.5 loaded
[ 2.236318] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.236386] EISA: Probing bus 0 at eisa.0
[ 2.236393] Cannot allocate resource for EISA slot 1
[ 2.236399] Cannot allocate resource for EISA slot 3
[ 2.236401] Cannot allocate resource for EISA slot 4
[ 2.236413] Cannot allocate resource for EISA slot 8
[ 2.236415] EISA: Detected 0 cards.
[ 2.236503] cpuidle: using governor ladder
[ 2.236585] cpuidle: using governor menu
[ 2.237042] TCP cubic registered
[ 2.237130] NET: Registered protocol family 10
[ 2.237514] lo: Disabled Privacy Extensions
[ 2.237816] NET: Registered protocol family 17
[ 2.237833] Bluetooth: L2CAP ver 2.11
[ 2.237834] Bluetooth: L2CAP socket layer initialized
[ 2.237837] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.237839] Bluetooth: SCO socket layer initialized
[ 2.237862] Marking TSC unstable due to TSC halts in idle
[ 2.237864] Bluetooth: RFCOMM socket layer initialized
[ 2.237869] Bluetooth: RFCOMM TTY layer initialized
[ 2.237871] Bluetooth: RFCOMM ver 1.10
[ 2.238265] Using IPI No-Shortcut mode
[ 2.238340] registered taskstats version 1
[ 2.238428] Magic number: 5:483:88
[ 2.238490] rtc_cmos 00:02: setting system clock to 2009-04-29 17:04:03 UTC (1241024643)
[ 2.238493] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.238495] EDD information not available.
[ 2.238795] Freeing unused kernel memory: 532k freed
[ 2.238909] Write protecting the kernel text: 4128k
[ 2.238950] Write protecting the kernel read-only data: 1532k
[ 2.272343] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.461037] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 2.605063] usb 1-2: configuration #1 chosen from 1 choice
[ 2.610053] Initializing USB Mass Storage driver...
[ 2.610286] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2.610368] usbcore: registered new interface driver usb-storage
[ 2.610372] USB Mass Storage support registered.
[ 2.610455] usb-storage: device found at 3
[ 2.610457] usb-storage: waiting for device to settle before scanning
[ 2.900038] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 3.112213] usb 2-1: configuration #1 chosen from 1 choice
[ 3.122678] usbcore: registered new interface driver hiddev
[ 3.128400] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input6
[ 3.132112] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:03.0-1/input0
[ 3.132141] usbcore: registered new interface driver usbhid
[ 3.132146] usbhid: v2.6:USB HID core driver
[ 3.713926] kjournald starting. Commit interval 5 seconds
[ 3.713944] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.900230] kjournald starting. Commit interval 5 seconds
[ 4.900248] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.086534] kjournald starting. Commit interval 5 seconds
[ 6.086552] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.272837] kjournald starting. Commit interval 5 seconds
[ 7.272856] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.609427] usb-storage: device scan complete
[ 7.610515] scsi 4:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 7.611718] sd 4:0:0:0: [sdb] 7827456 512-byte hardware sectors: (4.00 GB/3.73 GiB)
[ 7.612344] sd 4:0:0:0: [sdb] Write Protect is off
[ 7.612347] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 7.612349] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 7.614110] sd 4:0:0:0: [sdb] 7827456 512-byte hardware sectors: (4.00 GB/3.73 GiB)
[ 7.614602] sd 4:0:0:0: [sdb] Write Protect is off
[ 7.614604] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 7.614606] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 7.614609] sdb: sdb1
[ 7.617257] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.617337] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 8.459129] kjournald starting. Commit interval 5 seconds
[ 8.459146] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.606736] aufs 20080922
[ 8.616920] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 20.288689] udev: starting version 141
[ 20.345625] Linux agpgart interface v0.103
[ 20.354011] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
[ 20.360053] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[ 20.367315] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.454207] sis190 Gigabit Ethernet driver 1.2 loaded.
[ 20.454240] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 20.454254] sis190 0000:00:04.0: setting latency timer to 64
[ 20.454295] 0000:00:04.0: Read MAC address from EEPROM
[ 20.458175] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 20.530781] acpi device:04: registered as cooling_device2
[ 20.530884] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input8
[ 20.540174] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.540401] 0000:00:04.0: Unknown PHY transceiver at address 1.
[ 20.713384] cfg80211: Calling CRDA to update world regulatory domain
[ 20.757604] ath5k_pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.757624] ath5k_pci 0000:02:00.0: setting latency timer to 64
[ 20.757754] ath5k_pci 0000:02:00.0: registered as 'phy0'
[ 20.799015] phy0: Selected rate control algorithm 'pid'
[ 20.832578] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 20.853316] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 21.008343] cfg80211: World regulatory domain updated:
[ 21.008348] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.008351] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.008353] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.008356] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.008358] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.008360] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.056030] 0000:00:04.0: Using transceiver at address 1 as default.
[ 21.088841] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f7d18000 (IRQ: 19), 00:1e:33:09:d7:23
[ 21.088844] eth0: RGMII mode.
[ 21.088850] eth0: Enabling Auto-negotiation.
[ 21.120108] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 21.120286] HDA Intel 0000:00:0f.0: setting latency timer to 64
[ 21.145811] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 21.687673] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04751/0x200000
[ 21.721395] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 22.140301] Adding 5269280k swap on /dev/sda5. Priority:-1 extents:1 across:5269280k
[ 24.285544] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.285548] Bluetooth: BNEP filters: protocol multicast
[ 24.297899] Bridge firewalling registered
[ 25.040027] lp: driver loaded but no devices found
[ 25.053271] ppdev: user-space parallel port driver
[ 28.740116] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.773408] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.637578] wlan0: direct probe to AP 00:0b:6b:80:b2:68 try 1
[ 30.837025] wlan0: direct probe to AP 00:0b:6b:80:b2:68 try 2
[ 31.037024] wlan0: direct probe to AP 00:0b:6b:80:b2:68 try 3
[ 31.237024] wlan0: direct probe to AP 00:0b:6b:80:b2:68 timed out
[ 38.768032] eth0: mii ext = 0000.
[ 38.784030] eth0: mii lpa = 41e1 adv = 01e1.
[ 38.784036] eth0: link on 100 Mbps Full Duplex mode.
[ 38.784332] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 49.408025] eth0: no IPv6 routers present


an apegatastisw ton driver t 8a ginei,den 8a ftia3ei to 8ema? kati me tin black list..
eyxaristw gia ti boi8eia logari

[logari81]

μια εντολή σου έδωσα λάθος, η σωστη ειναι

Κώδικας: Επιλογή όλων

sudo iwlist scan

αλλα απότι βλεπω στο liveusb μια χαρα δουλευει η κάρτα.

[linuxman]

Άρα το συμπέρασμα είναι να βάλεις το 9.04 και θα είσαι οκ.

[panagiotispoyls]

Κώδικας: Επιλογή όλων

lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wifi0 Interface doesn't support scanning.

ath0 Scan completed :
Cell 01 - Address: 00:23:48:0E:DD:CE
ESSID:"CONN-X_3284"
Mode:Master
Frequency:2.412 GHz (Channel 1)
Quality=8/70 Signal level=-87 dBm Noise level=-95 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:bcn_int=100
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Cell 02 - Address: 00:05:59:06:50:9B
ESSID:"NetFasteR IAD (PSTN)"
Mode:Master
Frequency:2.437 GHz (Channel 6)
Quality=9/70 Signal level=-86 dBm Noise level=-95 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Extra:bcn_int=100
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Preauthentication Supported
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Cell 03 - Address: 00:14:BF:E6:B9:03
ESSID:"linksys"
Mode:Master
Frequency:2.462 GHz (Channel 11)
Quality=28/70 Signal level=-67 dBm Noise level=-95 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Extra:bcn_int=100
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Cell 04 - Address: 00:13:33:0C:A0:62
ESSID:"OTE CONNX"
Mode:Master
Frequency:2.437 GHz (Channel 6)
Quality=22/70 Signal level=-73 dBm Noise level=-95 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:bcn_int=100
Cell 05 - Address: 00:0B:6B:80:B2:68
ESSID:"awmn-milos74-ap"
Mode:Master
Frequency:2.417 GHz (Channel 2)
Quality=1/70 Signal level=-94 dBm Noise level=-95 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
Extra:bcn_int=100

pan0 Interface doesn't support scanning.


ωραια αλλα δείτε ΚΑΙ ΑΥΤΌ

Κώδικας: Επιλογή όλων

Unable to create a valid backtrace.

This backtrace appears to be of no use.
This is probably because your packages are built in a way which prevents creation of proper backtraces, or the stack frame was seriously corrupted in the crash.

και αυτό

Κώδικας: Επιλογή όλων

A Fatal Error Occurred
The application KDE Daemon (kded4) crashed and caused the signal 11 (SIGSEGV).
Please help us improve the software you use by filing a report at http://bugs.kde.org. Useful details include how to reproduce the error, documents that were loaded, etc.



stack frame was seriously corrupted in the crash.

(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread 0xb608b700 (LWP 2950)]
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
0xb8066430 in __kernel_vsyscall ()
[Current thread is 0 (process 2950)]

Thread 1 (Thread 0xb608b700 (LWP 2950)):
#0 0xb8066430 in __kernel_vsyscall ()
#1 0xb66bc780 in nanosleep () from /lib/tls/i686/cmov/libc.so.6
#2 0xb66bc5be in sleep () from /lib/tls/i686/cmov/libc.so.6
#3 0xb7c938b2 in ?? () from /usr/lib/libkdeui.so.5
#4 0xb7c94274 in KCrash::defaultCrashHandler () from /usr/lib/libkdeui.so.5
#5 <signal handler called>
#6 0x00000018 in ?? ()
#7 0xb458239e in ?? () from /usr/lib/kde4/kded_knetworkmanager.so
#8 0xb4583353 in ?? () from /usr/lib/kde4/kded_knetworkmanager.so
#9 0xb6b43ca8 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#10 0xb6b44932 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#11 0xb7b8a507 in KDialog::okClicked () from /usr/lib/libkdeui.so.5
#12 0xb7b8d028 in KDialog::slotButtonClicked () from /usr/lib/libkdeui.so.5
#13 0xb7b8e374 in KDialog::qt_metacall () from /usr/lib/libkdeui.so.5
#14 0xb6b43ca8 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#15 0xb6b44932 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#16 0xb6b46be3 in QSignalMapper::mapped () from /usr/lib/libQtCore.so.4
#17 0xb6b4746d in QSignalMapper::map () from /usr/lib/libQtCore.so.4
#18 0xb6b4765e in QSignalMapper::map () from /usr/lib/libQtCore.so.4
#19 0xb6b47f2b in QSignalMapper::qt_metacall () from /usr/lib/libQtCore.so.4
#20 0xb6b43ca8 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#21 0xb6b440e0 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#22 0xb76b66a1 in QAbstractButton::clicked () from /usr/lib/libQtGui.so.4
#23 0xb73e14a9 in ?? () from /usr/lib/libQtGui.so.4
#24 0xb73e3104 in ?? () from /usr/lib/libQtGui.so.4
#25 0xb73e3396 in QAbstractButton::mouseReleaseEvent () from /usr/lib/libQtGui.so.4
#26 0xb7056bd3 in QWidget::event () from /usr/lib/libQtGui.so.4
#27 0xb73e134e in QAbstractButton::event () from /usr/lib/libQtGui.so.4
#28 0xb748c310 in QPushButton::event () from /usr/lib/libQtGui.so.4
#29 0xb6ffff2c in QApplicationPrivate::notify_helper () from /usr/lib/libQtGui.so.4
#30 0xb7008ba1 in QApplication::notify () from /usr/lib/libQtGui.so.4
#31 0xb7c2394d in KApplication::notify () from /usr/lib/libkdeui.so.5
#32 0xb6b2da3b in QCoreApplication::notifyInternal () from /usr/lib/libQtCore.so.4
#33 0xb7007c0e in QApplicationPrivate::sendMouseEvent () from /usr/lib/libQtGui.so.4
#34 0xb7077a0e in ?? () from /usr/lib/libQtGui.so.4
#35 0xb7076d37 in QApplication::x11ProcessEvent () from /usr/lib/libQtGui.so.4
#36 0xb70a1cfa in ?? () from /usr/lib/libQtGui.so.4
#37 0xb6338b88 in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#38 0xb633c0eb in ?? () from /usr/lib/libglib-2.0.so.0
#39 0xb633c268 in g_main_context_iteration () from /usr/lib/libglib-2.0.so.0
#40 0xb6b59438 in QEventDispatcherGlib::processEvents () from /usr/lib/libQtCore.so.4
#41 0xb70a13f5 in ?? () from /usr/lib/libQtGui.so.4
#42 0xb6b2c06a in QEventLoop::processEvents () from /usr/lib/libQtCore.so.4
#43 0xb6b2c4aa in QEventLoop::exec () from /usr/lib/libQtCore.so.4
#44 0xb6b2e959 in QCoreApplication::exec () from /usr/lib/libQtCore.so.4
#45 0xb6fffda7 in QApplication::exec () from /usr/lib/libQtGui.so.4
#46 0xb804ecf0 in kdemain () from /usr/lib/libkdeinit4_kded4.so
#47 0x080486b2 in _start ()
#0 0xb8066430 in __kernel_vsyscall ()


μήπως να κάνω νεγκατάσταση από την αρχή;

[logari81]

αν σου ειναι εύκολο μάλλον ειναι ο πιο σύντομος δρομος.

[panagiotispoyls]

[quote="logari81"]αν σου ειναι εύκολο μάλλον ειναι ο πιο σύντομος δρομος.[/quote
καλημέρα
οκ τότε ξεκινάω την εγκατάσταση ξανά κ ας ελπίσω να δουλεψει,

[panagiotispoyls]

ok η επανεγκατάσταση ολοκληρώθηκε, τώρα πάλι πρέπει να θυμηθώ πως έγτιαξα τα γραφικά. με το ασύρματο τι να κάνω για να δούμε ότι δουλέει κανονικά τώρα?