Πρόβλημα με ασύρματο δίκτυο σε Fujitsu-Siemens Mini netbook

[flyefta]

Χαιρετώ την κοινότητα.
το πρόβλημά μου είναι ότι από εχθές δεν μπορώ να συνδεθω ασύρματα σε κανένα δίκτυο(δεν βλέπω κανένα). Ενσύρματα δουλεύω τέλεια. Βασικά είναι σαν να έχει απενεργοποιηθεί το modem. Έχω την εντύπωση ότι μπορεί να έχει απενεργοποιηθεί από κάποιο συνδυασμό hotkeys αλλά από εχθες που προσπαθώ δεν έχω καταφέρει τπτ... Fn+F2 δεν κάνει τπτ...

τα παρακάτω ίσως βοηθήσουν

Κώδικας: Επιλογή όλων

flyefta@flyefta-netbook:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
07:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)


Κώδικας: Επιλογή όλων

flyefta@flyefta-netbook:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:0b:62:1a:f0
inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::214:bff:fe62:1af0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2430 errors:0 dropped:0 overruns:0 frame:0
TX packets:1927 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2852831 (2.8 MB) TX bytes:261163 (261.1 KB)
Interrupt:252 Base address:0x8000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)



Κώδικας: Επιλογή όλων

flyefta@flyefta-netbook:~$ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

pan0 no wireless extensions.


[logari81]

δώσε λιγο το αποτελεσμα των εντολών

Κώδικας: Επιλογή όλων

lspci -nn |grep Atheros
lsmod

(γενικα αντι για "lspci" καλο ειναι να χρησιμοποιεις παντα "lspci -nn")

[flyefta]

Καταρχήν ευχαριστώ για την άμεση απάντηση,

Κώδικας: Επιλογή όλων

flyefta@flyefta-netbook:~$ lspci -nn |grep Atheros
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)

Κώδικας: Επιλογή όλων

flyefta@flyefta-netbook:~$ lsmod
Module Size Used by
i915 65668 3
drm 96296 4 i915
binfmt_misc 16776 1
ppdev 15620 0
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
input_polldev 11912 0
joydev 18368 0
lp 17156 0
parport 42220 2 ppdev,lp
snd_hda_intel 434100 3
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 82948 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
uvcvideo 63240 0
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
compat_ioctl32 9344 1 uvcvideo
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
iTCO_wdt 19108 0
iTCO_vendor_support 11652 1 iTCO_wdt
videodev 41600 1 uvcvideo
psmouse 61972 0
v4l1_compat 21764 2 uvcvideo,videodev
ath_pci 99224 0
snd 62628 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcspkr 10496 0
serio_raw 13316 0
btusb 19608 2
intel_agp 34108 1
wlan 210288 1 ath_pci
ath_hal 198864 1 ath_pci
soundcore 15200 1 snd
agpgart 42696 3 drm,intel_agp
video 25360 0
output 11008 1 video
snd_page_alloc 16904 2 snd_hda_intel,snd_pcm
usb_storage 99520 0
r8169 40836 0
mii 13312 1 r8169
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit

[logari81]

να υποθεσω ότι δεν εκανες φρεσκια εγκατασταση 9.04 γιατι αν ειχες κανει η συγεκριμενη καρτα θα δουλευε με την μια. Πες μας λοιπον αν εκανες αναβαθμισει απο 8.10 και τι ειχες πειράξει πριν. Απότι βλεπω εχει φορτωθει το module ath_hal αντι του ath5k που θα ηταν το φυσιολογικο για 9.04.

[flyefta]

εγκατάσταση έκανα "φρέσκια" 9,04 netbook remix. Το netbook έρχεται με ΧΡ... την κάρτα όντως την "έβλεπε" με τη μια... μέχρι χθες... εγώ δε νομίζω να πείραξα τπτ... μάλιστα έκανα και φορμάτ χθες πιστεύοντας ότι μπορει να το χάλασα από την άγνοιά μου αλλά το πρόβλημα παραμένει...

[logari81]

αα για το netbοοκ remix δεν γνωρίζω πιθανον να εχουν αντικαταστησει το ath5k και να εχουν μεινει στον παλιο driver. Αν θες δοκίμασε

Κώδικας: Επιλογή όλων

sudo modprobe -r ath_hal
sudo modprobe -r ath_pci
sudo modprobe ath5k

διαφορετικά περίμενε απάντηση απο καποιον που εχει εμπειρία με το netbοοκ remix. Κατι αλλο που θα μπορουσε να βοηθησει ειναι το αποτελεσμα της εντολης

Κώδικας: Επιλογή όλων

dmesg

[flyefta]

η πρώτη εντολή έβγαλε σφάλμα

Κώδικας: Επιλογή όλων

flyefta@flyefta-netbook:~$ sudo modprobe -r ath_hal
FATAL: Module ath_hal is in use.

Κώδικας: Επιλογή όλων

[ 0.538173] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.540002] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3199.90 BogoMIPS (lpj=6399806)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.624227] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.624267] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.628069] Brought up 2 CPUs
[ 0.628076] Total of 2 processors activated (6400.45 BogoMIPS).
[ 0.628146] CPU0 attaching sched-domain:
[ 0.628151] domain 0: span 0-1 level SIBLING
[ 0.628156] groups: 0 1
[ 0.628166] CPU1 attaching sched-domain:
[ 0.628170] domain 0: span 0-1 level SIBLING
[ 0.628175] groups: 1 0
[ 0.628309] net_namespace: 776 bytes
[ 0.628309] Booting paravirtualized kernel on bare hardware
[ 0.628688] Time: 5:50:39 Date: 06/19/09
[ 0.628688] regulator: core version 0.5
[ 0.628688] NET: Registered protocol family 16
[ 0.628688] EISA bus registered
[ 0.628688] ACPI: bus type pci registered
[ 0.628688] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.628688] PCI: MCFG area at e0000000 reserved in E820
[ 0.628688] PCI: Using MMCONFIG for extended config space
[ 0.628688] PCI: Using configuration type 1 for base access
[ 0.633352] ACPI: EC: Look up EC in DSDT
[ 0.638664] ACPI: BIOS _OSI(Linux) query ignored
[ 0.639965] ACPI: Interpreter enabled
[ 0.639974] ACPI: (supports S0 S3 S4 S5)
[ 0.640026] ACPI: Using IOAPIC for interrupt routing
[ 0.652584] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.652590] ACPI: EC: driver started in poll mode
[ 0.652928] ACPI: No dock devices found.
[ 0.652957] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.653095] pci 0000:00:02.0: reg 10 32bit mmio: [0xf8100000-0xf817ffff]
[ 0.653104] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.653112] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.653121] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf8200000-0xf823ffff]
[ 0.653162] pci 0000:00:02.1: reg 10 32bit mmio: [0xf8180000-0xf81fffff]
[ 0.653300] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8440000-0xf8443fff]
[ 0.653350] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.653358] pci 0000:00:1b.0: PME# disabled
[ 0.653440] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.653447] pci 0000:00:1c.0: PME# disabled
[ 0.653532] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.653539] pci 0000:00:1c.1: PME# disabled
[ 0.653622] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.653630] pci 0000:00:1c.2: PME# disabled
[ 0.653711] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.653790] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.653869] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.653946] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.654028] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8444000-0xf84443ff]
[ 0.654088] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.654096] pci 0000:00:1d.7: PME# disabled
[ 0.654270] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.654278] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.654322] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.654333] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.654345] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.654356] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.654368] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.654434] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.654446] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.654457] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.654469] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.654480] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.654492] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8444400-0xf84447ff]
[ 0.654517] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.654525] pci 0000:00:1f.2: PME# disabled
[ 0.654591] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.654695] pci 0000:02:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.654727] pci 0000:02:00.0: reg 18 64bit mmio: [0xf4000000-0xf4000fff]
[ 0.654750] pci 0000:02:00.0: reg 20 64bit mmio: [0xf0000000-0xf000ffff]
[ 0.654764] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.654783] pci 0000:02:00.0: supports D1 D2
[ 0.654787] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.654796] pci 0000:02:00.0: PME# disabled
[ 0.654888] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.654896] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.654908] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.654982] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.654991] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.655003] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
[ 0.655084] pci 0000:07:00.0: reg 10 64bit mmio: [0xf8000000-0xf800ffff]
[ 0.655234] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xf80fffff]
[ 0.655311] pci 0000:00:1e.0: transparent bridge
[ 0.655359] bus 00 -> node 0
[ 0.655372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.656093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.656380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.656656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.656964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.672205] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.672446] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.672678] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.672914] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.673145] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.673376] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.673606] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.673837] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.674041] ACPI: Power Resource [FN10] (on)
[ 0.674446] ACPI: WMI: Mapper loaded
[ 0.674583] SCSI subsystem initialized
[ 0.674583] libata version 3.00 loaded.
[ 0.674583] usbcore: registered new interface driver usbfs
[ 0.674583] usbcore: registered new interface driver hub
[ 0.674583] usbcore: registered new device driver usb
[ 0.674583] PCI: Using ACPI for IRQ routing
[ 0.680021] Bluetooth: Core ver 2.13
[ 0.680057] NET: Registered protocol family 31
[ 0.680057] Bluetooth: HCI device and connection manager initialized
[ 0.680057] Bluetooth: HCI socket layer initialized
[ 0.680057] NET: Registered protocol family 8
[ 0.680057] NET: Registered protocol family 20
[ 0.680074] NetLabel: Initializing
[ 0.680077] NetLabel: domain hash size = 128
[ 0.680081] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.680105] NetLabel: unlabeled traffic allowed by default
[ 0.680135] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.680145] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.684114] AppArmor: AppArmor Filesystem Enabled
[ 0.688023] Switched to high resolution mode on CPU 0
[ 0.688343] Switched to high resolution mode on CPU 1
[ 0.692025] pnp: PnP ACPI init
[ 0.692048] ACPI: bus type pnp registered
[ 0.696871] pnp: PnP ACPI: found 11 devices
[ 0.696877] ACPI: ACPI bus type pnp unregistered
[ 0.696884] PnPBIOS: Disabled by ACPI PNP
[ 0.696905] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.696912] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.696918] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.696924] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.696930] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.696937] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.696943] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.696949] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.696964] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.696977] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.696983] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.696989] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.696996] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.697004] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.697021] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.697029] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.731950] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.731958] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.731969] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.731977] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.731989] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.732008] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.732018] pci 0000:00:1c.1: MEM window: 0xf6000000-0xf7ffffff
[ 0.732027] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[ 0.732039] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:07
[ 0.732043] pci 0000:00:1c.2: IO window: disabled
[ 0.732053] pci 0000:00:1c.2: MEM window: 0xf8000000-0xf80fffff
[ 0.732060] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.732072] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 0.732076] pci 0000:00:1e.0: IO window: disabled
[ 0.732084] pci 0000:00:1e.0: MEM window: disabled
[ 0.732091] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.732121] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.732130] pci 0000:00:1c.0: setting latency timer to 64
[ 0.732146] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.732155] pci 0000:00:1c.1: setting latency timer to 64
[ 0.732169] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.732178] pci 0000:00:1c.2: setting latency timer to 64
[ 0.732190] pci 0000:00:1e.0: setting latency timer to 64
[ 0.732198] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.732202] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.732207] bus: 02 index 0 io port: [0x2000-0x2fff]
[ 0.732212] bus: 02 index 1 mmio: [0xf4000000-0xf5ffffff]
[ 0.732217] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff]
[ 0.732221] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.732226] bus: 03 index 0 io port: [0x3000-0x3fff]
[ 0.732230] bus: 03 index 1 mmio: [0xf6000000-0xf7ffffff]
[ 0.732235] bus: 03 index 2 mmio: [0xf2000000-0xf3ffffff]
[ 0.732239] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.732244] bus: 07 index 0 mmio: [0x0-0x0]
[ 0.732248] bus: 07 index 1 mmio: [0xf8000000-0xf80fffff]
[ 0.732252] bus: 07 index 2 mmio: [0x0-0x0]
[ 0.732256] bus: 07 index 3 mmio: [0x0-0x0]
[ 0.732260] bus: 08 index 0 mmio: [0x0-0x0]
[ 0.732264] bus: 08 index 1 mmio: [0x0-0x0]
[ 0.732268] bus: 08 index 2 mmio: [0x0-0x0]
[ 0.732273] bus: 08 index 3 io port: [0x00-0xffff]
[ 0.732277] bus: 08 index 4 mmio: [0x000000-0xffffffff]
[ 0.732298] NET: Registered protocol family 2
[ 0.744124] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.744642] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.745552] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.746053] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.746059] TCP reno registered
[ 0.752192] NET: Registered protocol family 1
[ 0.752422] checking if image is initramfs... it is
[ 1.726762] Freeing initrd memory: 7377k freed
[ 1.726834] Simple Boot Flag at 0x36 set to 0x1
[ 1.727212] cpufreq: No nForce2 chipset.
[ 1.727486] audit: initializing netlink socket (disabled)
[ 1.727523] type=2000 audit(1245390639.724:1): initialized
[ 1.742487] highmem bounce pool size: 64 pages
[ 1.742499] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.745303] VFS: Disk quotas dquot_6.5.1
[ 1.745429] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.746766] fuse init (API version 7.10)
[ 1.746953] msgmni has been set to 1724
[ 1.747317] alg: No test for stdrng (krng)
[ 1.747350] io scheduler noop registered
[ 1.747354] io scheduler anticipatory registered
[ 1.747358] io scheduler deadline registered
[ 1.747399] io scheduler cfq registered (default)
[ 1.747422] pci 0000:00:02.0: Boot video device
[ 1.754531] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.754593] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.754641] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 1.754662] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.754696] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.754723] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.754824] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.754882] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.754925] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 1.754945] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.754977] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.755004] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.755103] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.755161] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.755202] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 1.755222] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.755256] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.755283] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.755407] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.755912] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.756878] ACPI: AC Adapter [ACAD] (off-line)
[ 1.787255] ACPI: Battery Slot [BAT0] (battery present)
[ 1.787404] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.787411] ACPI: Power Button (FF) [PWRF]
[ 1.787500] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.787587] ACPI: Lid Switch [LID]
[ 1.787678] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.787684] ACPI: Power Button (CM) [PWRB]
[ 1.787778] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.787785] ACPI: Sleep Button (CM) [SLPB]
[ 1.788177] fan PNP0C0B:00: registered as cooling_device0
[ 1.788189] ACPI: Fan [FN1] (on)
[ 1.789317] ACPI: SSDT 3F6D6BE3, 0245 (r2 PmRef Cpu0Ist 3000 INTL 20050624)
[ 1.789984] ACPI: SSDT 3F6D6579, 05E5 (r2 PmRef Cpu0Cst 3001 INTL 20050624)
[ 1.791006] Monitor-Mwait will be used to enter C-1 state
[ 1.791013] Monitor-Mwait will be used to enter C-2 state
[ 1.791019] Monitor-Mwait will be used to enter C-3 state
[ 1.791049] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.791093] processor ACPI_CPU:00: registered as cooling_device1
[ 1.791103] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.791816] ACPI: SSDT 3F6D6E28, 00D4 (r2 PmRef Cpu1Ist 3000 INTL 20050624)
[ 1.792450] ACPI: SSDT 3F6D6B5E, 0085 (r2 PmRef Cpu1Cst 3000 INTL 20050624)
[ 1.793533] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.793578] processor ACPI_CPU:01: registered as cooling_device2
[ 1.793587] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.810693] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.811624] ACPI: Thermal Zone [THRM] (50 C)
[ 1.811725] isapnp: Scanning for PnP cards...
[ 2.165358] isapnp: No Plug & Play device found
[ 2.177535] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.179470] brd: module loaded
[ 2.180144] loop: module loaded
[ 2.180309] Fixed MDIO Bus: probed
[ 2.180321] PPP generic driver version 2.4.2
[ 2.180464] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.180530] Driver 'sd' needs updating - please use bus_type methods
[ 2.180550] Driver 'sr' needs updating - please use bus_type methods
[ 2.180697] ata_piix 0000:00:1f.1: version 2.12
[ 2.180728] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.180794] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.180967] scsi0 : ata_piix
[ 2.181192] scsi1 : ata_piix
[ 2.182315] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 2.182323] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 2.344718] ata1.00: ATA-7: TOSHIBA MK1214GAH, BW004A, max UDMA/100
[ 2.344725] ata1.00: 234441648 sectors, multi 16: LBA48
[ 2.352618] ata1.00: configured for UDMA/100
[ 2.352681] ata2: port disabled. ignoring.
[ 2.352894] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1214GA BW00 PQ: 0 ANSI: 5
[ 2.353130] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 2.353175] sd 0:0:0:0: [sda] Write Protect is off
[ 2.353181] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.353250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.353400] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 2.353440] sd 0:0:0:0: [sda] Write Protect is off
[ 2.353446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.353515] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.353524] sda: sda1 sda2 < sda5 >
[ 2.419013] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.419111] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.419162] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.419171] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 2.572035] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.572182] scsi2 : ata_piix
[ 2.572328] scsi3 : ata_piix
[ 2.574188] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 2.574195] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 2.904696] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.904743] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.904791] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.904798] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.904911] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.908853] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.908864] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.908890] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8444000
[ 2.924019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.924168] usb usb1: configuration #1 chosen from 1 choice
[ 2.924224] hub 1-0:1.0: USB hub found
[ 2.924240] hub 1-0:1.0: 8 ports detected
[ 2.924470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.924512] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.924582] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.924595] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.924602] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.924708] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.924747] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 2.924914] usb usb2: configuration #1 chosen from 1 choice
[ 2.924969] hub 2-0:1.0: USB hub found
[ 2.924984] hub 2-0:1.0: 2 ports detected
[ 2.925150] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.925162] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.925169] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.925254] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.925289] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 2.925439] usb usb3: configuration #1 chosen from 1 choice
[ 2.925492] hub 3-0:1.0: USB hub found
[ 2.925505] hub 3-0:1.0: 2 ports detected
[ 2.925672] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.925684] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.925691] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.925774] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.925823] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 2.925978] usb usb4: configuration #1 chosen from 1 choice
[ 2.926032] hub 4-0:1.0: USB hub found
[ 2.926046] hub 4-0:1.0: 2 ports detected
[ 2.926207] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.926219] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.926225] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.926310] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.926356] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 2.926515] usb usb5: configuration #1 chosen from 1 choice
[ 2.926569] hub 5-0:1.0: USB hub found
[ 2.926583] hub 5-0:1.0: 2 ports detected
[ 2.926851] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.928524] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.929340] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.929353] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.929360] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.929367] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.929375] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.932091] mice: PS/2 mouse device common for all mice
[ 2.952140] rtc_cmos 00:08: RTC can wake from S4
[ 2.952210] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 2.952254] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.952394] device-mapper: uevent: version 1.0.3
[ 2.952602] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.952787] device-mapper: multipath: version 1.0.5 loaded
[ 2.952795] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.952993] EISA: Probing bus 0 at eisa.0
[ 2.953004] Cannot allocate resource for EISA slot 1
[ 2.953012] Cannot allocate resource for EISA slot 2
[ 2.953018] Cannot allocate resource for EISA slot 3
[ 2.953049] EISA: Detected 0 cards.
[ 2.953327] cpuidle: using governor ladder
[ 2.953558] cpuidle: using governor menu
[ 2.954606] TCP cubic registered
[ 2.954839] NET: Registered protocol family 10
[ 2.955668] lo: Disabled Privacy Extensions
[ 2.956331] NET: Registered protocol family 17
[ 2.956375] Bluetooth: L2CAP ver 2.11
[ 2.956379] Bluetooth: L2CAP socket layer initialized
[ 2.956385] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.956388] Bluetooth: SCO socket layer initialized
[ 2.956481] Bluetooth: RFCOMM socket layer initialized
[ 2.956495] Bluetooth: RFCOMM TTY layer initialized
[ 2.956499] Bluetooth: RFCOMM ver 1.10
[ 2.957160] Marking TSC unstable due to TSC halts in idle
[ 2.957778] Using IPI No-Shortcut mode
[ 2.957958] registered taskstats version 1
[ 2.958203] Magic number: 13:741:820
[ 2.958331] rtc_cmos 00:08: setting system clock to 2009-06-19 05:50:42 UTC (1245390642)
[ 2.958341] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.958345] EDD information not available.
[ 2.958761] Freeing unused kernel memory: 532k freed
[ 2.959059] Write protecting the kernel text: 4112k
[ 2.959162] Write protecting the kernel read-only data: 1524k
[ 2.981753] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.237035] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.410772] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.410814] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.410847] r8169 0000:02:00.0: setting latency timer to 64
[ 3.411005] r8169 0000:02:00.0: irq 2300 for MSI/MSI-X
[ 3.412740] eth0: RTL8102e at 0xf7c68000, 00:14:0b:62:1a:f0, XID 34a00000 IRQ 2300
[ 3.565422] usb 1-1: configuration #1 chosen from 1 choice
[ 3.708115] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 4.073861] PM: Starting manual resume from disk
[ 4.073868] PM: Resume from partition 8:5
[ 4.073872] PM: Checking hibernation image.
[ 4.074272] PM: Resume from disk failed.
[ 4.081426] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.081433] EXT3-fs: write access will be enabled during recovery.
[ 4.131989] usb 1-5: configuration #1 chosen from 1 choice
[ 4.145174] Initializing USB Mass Storage driver...
[ 4.146439] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4.146879] usb-storage: device found at 3
[ 4.146885] usb-storage: waiting for device to settle before scanning
[ 4.146923] usbcore: registered new interface driver usb-storage
[ 4.146933] USB Mass Storage support registered.
[ 4.608131] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 4.804779] usb 5-2: configuration #1 chosen from 1 choice
[ 4.920120] kjournald starting. Commit interval 5 seconds
[ 4.920165] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 4.920177] ext3_orphan_cleanup: deleting unreferenced inode 6635543
[ 4.920224] EXT3-fs: sda1: 1 orphan inode deleted
[ 4.920228] EXT3-fs: recovery complete.
[ 4.945751] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.144726] usb-storage: device scan complete
[ 9.146844] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 9.149929] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 9.150070] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 13.480631] udev: starting version 141
[ 13.849040] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[ 13.880157] Linux agpgart interface v0.103
[ 13.885960] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.010702] ath_hal: module license 'Proprietary' taints kernel.
[ 14.015027] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 14.052553] wlan: 0.9.4
[ 14.178629] intel_rng: FWH not detected
[ 14.326888] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 14.327213] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 14.330294] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 14.348111] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 14.348312] usbcore: registered new interface driver btusb
[ 14.410218] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 14.454032] ath_pci: 0.9.4
[ 14.455286] ath_pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.455310] ath_pci 0000:07:00.0: setting latency timer to 64
[ 14.503861] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[ 14.503903] ath_pci 0000:07:00.0: PCI INT A disabled
[ 14.759002] Linux video capture interface: v2.00
[ 14.776422] iTCO_vendor_support: vendor-support=0
[ 14.780416] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 14.780868] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 14.781949] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.828378] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 14.879038] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0240)
[ 14.880664] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input8
[ 14.887665] usbcore: registered new interface driver uvcvideo
[ 14.887755] USB Video Class driver (v0.1.0)
[ 15.084261] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.084434] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.110008] hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
[ 15.458128] lp: driver loaded but no devices found
[ 15.622227] Adding 2980016k swap on /dev/sda5. Priority:-1 extents:1 across:2980016k
[ 15.663129] EXT3 FS on sda1, internal journal
[ 15.716507] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
[ 15.754513] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 16.562589] type=1505 audit(1245390656.101:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1992
[ 16.562863] type=1505 audit(1245390656.101:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1992
[ 16.562982] type=1505 audit(1245390656.101:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1992
[ 16.563080] type=1505 audit(1245390656.101:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1992
[ 16.880136] type=1505 audit(1245390656.421:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1997
[ 16.880549] type=1505 audit(1245390656.421:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1997
[ 16.944897] type=1505 audit(1245390656.485:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2001
[ 20.307694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.307704] Bluetooth: BNEP filters: protocol multicast
[ 20.329389] Bridge firewalling registered
[ 22.246232] ppdev: user-space parallel port driver
[ 23.478531] [drm] Initialized drm 1.1.0 20060810
[ 23.496404] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.496414] pci 0000:00:02.0: setting latency timer to 64
[ 23.496751] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 23.500451] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 23.500526] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 24.881165] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 26.459862] r8169: eth0: link down
[ 26.460410] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.718880] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 41.552644] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 102.749834] r8169: eth0: link up
[ 102.750169] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 112.880083] eth0: no IPv6 routers present
[ 4668.117103] cfg80211: Calling CRDA to update world regulatory domain
[ 4668.228407] cfg80211: World regulatory domain updated:
[ 4668.228422] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4668.228436] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4668.228447] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4668.228458] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4668.228469] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4668.228480] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4668.402163] ath5k_pci 0000:07:00.0: enabling device (0000 -> 0002)
[ 4668.402194] ath5k_pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4668.402231] ath5k_pci 0000:07:00.0: setting latency timer to 64
[ 4668.402756] ath5k_pci 0000:07:00.0: registered as 'phy0'
[ 4668.412892] ath5k phy0: failed to wakeup the MAC Chip
[ 4668.412978] ath5k_pci 0000:07:00.0: PCI INT A disabled
[ 4668.413028] ath5k_pci: probe of 0000:07:00.0 failed with error -5
[ 5615.984322] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 5829.248297] ath_pci: driver unloaded
[ 5829.260083] wlan: driver unloaded
[ 5829.276078] ath_hal: driver unloaded


[/code]

[logari81]

χμμ προσπαθει να φορτωσει το ath5k αλλα δεν τα καταφερνει, φαινεται να ειναι σχετικό με αυτό:
http://ubuntuforums.org/showthread.php?t=1136619
δοκιμασε να κανεις αυτό που λεει στο 2ο ποστ και κανε επανεκκινηση

[flyefta]

δυστυχώς τίποτα...

δίνοντας και πάλι dmesg βλέπω ότι διορθώνει καποια λάθη που υπήρχαν πριν αλλά ασύρματο δεν βλέπω...

Κώδικας: Επιλογή όλων

[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.74 BogoMIPS (lpj=6399488)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.019762] ACPI: Core revision 20080926
[ 0.022485] ACPI: Checking initramfs for custom DSDT
[ 0.496634] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.538097] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.540002] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3199.90 BogoMIPS (lpj=6399813)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.624203] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.624244] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.628069] Brought up 2 CPUs
[ 0.628076] Total of 2 processors activated (6399.65 BogoMIPS).
[ 0.628148] CPU0 attaching sched-domain:
[ 0.628153] domain 0: span 0-1 level SIBLING
[ 0.628158] groups: 0 1
[ 0.628170] CPU1 attaching sched-domain:
[ 0.628174] domain 0: span 0-1 level SIBLING
[ 0.628179] groups: 1 0
[ 0.628310] net_namespace: 776 bytes
[ 0.628310] Booting paravirtualized kernel on bare hardware
[ 0.628691] Time: 7:43:53 Date: 06/19/09
[ 0.628691] regulator: core version 0.5
[ 0.628691] NET: Registered protocol family 16
[ 0.628691] EISA bus registered
[ 0.628691] ACPI: bus type pci registered
[ 0.628691] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.628691] PCI: MCFG area at e0000000 reserved in E820
[ 0.628691] PCI: Using MMCONFIG for extended config space
[ 0.628691] PCI: Using configuration type 1 for base access
[ 0.633331] ACPI: EC: Look up EC in DSDT
[ 0.638629] ACPI: BIOS _OSI(Linux) query ignored
[ 0.639943] ACPI: Interpreter enabled
[ 0.639951] ACPI: (supports S0 S3 S4 S5)
[ 0.639988] ACPI: Using IOAPIC for interrupt routing
[ 0.652543] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.652550] ACPI: EC: driver started in poll mode
[ 0.652888] ACPI: No dock devices found.
[ 0.652916] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.653051] pci 0000:00:02.0: reg 10 32bit mmio: [0xf8100000-0xf817ffff]
[ 0.653060] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.653069] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.653077] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf8200000-0xf823ffff]
[ 0.653118] pci 0000:00:02.1: reg 10 32bit mmio: [0xf8180000-0xf81fffff]
[ 0.653256] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8440000-0xf8443fff]
[ 0.653307] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.653315] pci 0000:00:1b.0: PME# disabled
[ 0.653397] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.653404] pci 0000:00:1c.0: PME# disabled
[ 0.653489] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.653497] pci 0000:00:1c.1: PME# disabled
[ 0.653581] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.653589] pci 0000:00:1c.2: PME# disabled
[ 0.653670] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.653747] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.653825] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.653903] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.653985] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8444000-0xf84443ff]
[ 0.654042] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.654050] pci 0000:00:1d.7: PME# disabled
[ 0.654223] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.654231] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.654276] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.654287] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.654299] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.654311] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.654322] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.654389] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.654400] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.654411] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.654423] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.654435] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.654446] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8444400-0xf84447ff]
[ 0.654471] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.654479] pci 0000:00:1f.2: PME# disabled
[ 0.654546] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.654650] pci 0000:02:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.654682] pci 0000:02:00.0: reg 18 64bit mmio: [0xf4000000-0xf4000fff]
[ 0.654705] pci 0000:02:00.0: reg 20 64bit mmio: [0xf0000000-0xf000ffff]
[ 0.654719] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.654738] pci 0000:02:00.0: supports D1 D2
[ 0.654742] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.654751] pci 0000:02:00.0: PME# disabled
[ 0.654844] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.654852] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.654864] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.654936] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.654945] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.654957] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
[ 0.655038] pci 0000:07:00.0: reg 10 64bit mmio: [0xf8000000-0xf800ffff]
[ 0.655189] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xf80fffff]
[ 0.655265] pci 0000:00:1e.0: transparent bridge
[ 0.655313] bus 00 -> node 0
[ 0.655326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.656040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.656326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.656603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.656909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.672753] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.672990] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.673220] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.673455] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.673687] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.673917] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.674149] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.674380] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.674582] ACPI: Power Resource [FN10] (on)
[ 0.674986] ACPI: WMI: Mapper loaded
[ 0.675123] SCSI subsystem initialized
[ 0.675123] libata version 3.00 loaded.
[ 0.675123] usbcore: registered new interface driver usbfs
[ 0.675123] usbcore: registered new interface driver hub
[ 0.675123] usbcore: registered new device driver usb
[ 0.676019] PCI: Using ACPI for IRQ routing
[ 0.680020] Bluetooth: Core ver 2.13
[ 0.680055] NET: Registered protocol family 31
[ 0.680055] Bluetooth: HCI device and connection manager initialized
[ 0.680055] Bluetooth: HCI socket layer initialized
[ 0.680055] NET: Registered protocol family 8
[ 0.680055] NET: Registered protocol family 20
[ 0.680075] NetLabel: Initializing
[ 0.680079] NetLabel: domain hash size = 128
[ 0.680082] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.680108] NetLabel: unlabeled traffic allowed by default
[ 0.680138] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.680150] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.684112] AppArmor: AppArmor Filesystem Enabled
[ 0.688022] Switched to high resolution mode on CPU 0
[ 0.688313] Switched to high resolution mode on CPU 1
[ 0.692026] pnp: PnP ACPI init
[ 0.692050] ACPI: bus type pnp registered
[ 0.696307] pnp: PnP ACPI: found 11 devices
[ 0.696312] ACPI: ACPI bus type pnp unregistered
[ 0.696320] PnPBIOS: Disabled by ACPI PNP
[ 0.696340] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.696347] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.696353] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.696360] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.696366] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.696372] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.696379] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.696385] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.696399] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.696413] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.696418] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.696424] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.696430] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.696436] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.696447] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.696453] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.731378] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.731386] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.731398] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.731406] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.731418] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.731425] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.731434] pci 0000:00:1c.1: MEM window: 0xf6000000-0xf7ffffff
[ 0.731443] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[ 0.731455] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:07
[ 0.731459] pci 0000:00:1c.2: IO window: disabled
[ 0.731468] pci 0000:00:1c.2: MEM window: 0xf8000000-0xf80fffff
[ 0.731476] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.731487] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 0.731491] pci 0000:00:1e.0: IO window: disabled
[ 0.731500] pci 0000:00:1e.0: MEM window: disabled
[ 0.731507] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.731536] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.731545] pci 0000:00:1c.0: setting latency timer to 64
[ 0.731561] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.731570] pci 0000:00:1c.1: setting latency timer to 64
[ 0.731585] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.731594] pci 0000:00:1c.2: setting latency timer to 64
[ 0.731605] pci 0000:00:1e.0: setting latency timer to 64
[ 0.731613] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.731618] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.731623] bus: 02 index 0 io port: [0x2000-0x2fff]
[ 0.731628] bus: 02 index 1 mmio: [0xf4000000-0xf5ffffff]
[ 0.731633] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff]
[ 0.731637] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.731641] bus: 03 index 0 io port: [0x3000-0x3fff]
[ 0.731646] bus: 03 index 1 mmio: [0xf6000000-0xf7ffffff]
[ 0.731651] bus: 03 index 2 mmio: [0xf2000000-0xf3ffffff]
[ 0.731655] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.731659] bus: 07 index 0 mmio: [0x0-0x0]
[ 0.731664] bus: 07 index 1 mmio: [0xf8000000-0xf80fffff]
[ 0.731668] bus: 07 index 2 mmio: [0x0-0x0]
[ 0.731672] bus: 07 index 3 mmio: [0x0-0x0]
[ 0.731676] bus: 08 index 0 mmio: [0x0-0x0]
[ 0.731680] bus: 08 index 1 mmio: [0x0-0x0]
[ 0.731684] bus: 08 index 2 mmio: [0x0-0x0]
[ 0.731688] bus: 08 index 3 io port: [0x00-0xffff]
[ 0.731693] bus: 08 index 4 mmio: [0x000000-0xffffffff]
[ 0.731713] NET: Registered protocol family 2
[ 0.744126] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.744645] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.745557] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.746056] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.746064] TCP reno registered
[ 0.752190] NET: Registered protocol family 1
[ 0.752424] checking if image is initramfs... it is
[ 1.727674] Freeing initrd memory: 7377k freed
[ 1.727746] Simple Boot Flag at 0x36 set to 0x1
[ 1.728128] cpufreq: No nForce2 chipset.
[ 1.728399] audit: initializing netlink socket (disabled)
[ 1.728437] type=2000 audit(1245397433.728:1): initialized
[ 1.742825] highmem bounce pool size: 64 pages
[ 1.742839] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.745648] VFS: Disk quotas dquot_6.5.1
[ 1.745775] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.747103] fuse init (API version 7.10)
[ 1.747291] msgmni has been set to 1724
[ 1.747649] alg: No test for stdrng (krng)
[ 1.747680] io scheduler noop registered
[ 1.747685] io scheduler anticipatory registered
[ 1.747689] io scheduler deadline registered
[ 1.747728] io scheduler cfq registered (default)
[ 1.747753] pci 0000:00:02.0: Boot video device
[ 1.754846] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.754908] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.754956] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 1.754977] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.755010] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.755037] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.755136] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.755195] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.755236] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 1.755256] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.755288] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.755315] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.755414] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.755472] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.755513] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 1.755534] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.755567] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.755594] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.755717] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.756231] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.757201] ACPI: AC Adapter [ACAD] (on-line)
[ 1.786237] ACPI: Battery Slot [BAT0] (battery present)
[ 1.786384] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.786390] ACPI: Power Button (FF) [PWRF]
[ 1.786479] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.786565] ACPI: Lid Switch [LID]
[ 1.786655] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.786662] ACPI: Power Button (CM) [PWRB]
[ 1.786755] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.786761] ACPI: Sleep Button (CM) [SLPB]
[ 1.787141] fan PNP0C0B:00: registered as cooling_device0
[ 1.787153] ACPI: Fan [FN1] (on)
[ 1.788283] ACPI: SSDT 3F6D6BE3, 0245 (r2 PmRef Cpu0Ist 3000 INTL 20050624)
[ 1.788958] ACPI: SSDT 3F6D6579, 05E5 (r2 PmRef Cpu0Cst 3001 INTL 20050624)
[ 1.789998] Monitor-Mwait will be used to enter C-1 state
[ 1.790005] Monitor-Mwait will be used to enter C-2 state
[ 1.790011] Monitor-Mwait will be used to enter C-3 state
[ 1.790042] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.790087] processor ACPI_CPU:00: registered as cooling_device1
[ 1.790096] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.790812] ACPI: SSDT 3F6D6E28, 00D4 (r2 PmRef Cpu1Ist 3000 INTL 20050624)
[ 1.791419] ACPI: SSDT 3F6D6B5E, 0085 (r2 PmRef Cpu1Cst 3000 INTL 20050624)
[ 1.792503] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.792548] processor ACPI_CPU:01: registered as cooling_device2
[ 1.792557] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.809532] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.810467] ACPI: Thermal Zone [THRM] (59 C)
[ 1.810571] isapnp: Scanning for PnP cards...
[ 2.164285] isapnp: No Plug & Play device found
[ 2.177537] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.179474] brd: module loaded
[ 2.180149] loop: module loaded
[ 2.180312] Fixed MDIO Bus: probed
[ 2.180324] PPP generic driver version 2.4.2
[ 2.180467] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.180534] Driver 'sd' needs updating - please use bus_type methods
[ 2.180554] Driver 'sr' needs updating - please use bus_type methods
[ 2.180703] ata_piix 0000:00:1f.1: version 2.12
[ 2.180732] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.180797] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.180970] scsi0 : ata_piix
[ 2.181188] scsi1 : ata_piix
[ 2.182313] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 2.182320] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 2.344719] ata1.00: ATA-7: TOSHIBA MK1214GAH, BW004A, max UDMA/100
[ 2.344725] ata1.00: 234441648 sectors, multi 16: LBA48
[ 2.352620] ata1.00: configured for UDMA/100
[ 2.352679] ata2: port disabled. ignoring.
[ 2.352889] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1214GA BW00 PQ: 0 ANSI: 5
[ 2.353123] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 2.353167] sd 0:0:0:0: [sda] Write Protect is off
[ 2.353173] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.353243] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.353389] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 2.353429] sd 0:0:0:0: [sda] Write Protect is off
[ 2.353435] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.353504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.353513] sda: sda1 sda2 < sda5 >
[ 2.424444] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.424544] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.424594] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.424602] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 2.580038] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.580182] scsi2 : ata_piix
[ 2.580327] scsi3 : ata_piix
[ 2.582190] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 2.582197] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 2.912691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.912737] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.912785] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.912793] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.912907] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.916825] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.916836] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.916861] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8444000
[ 2.932023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.932167] usb usb1: configuration #1 chosen from 1 choice
[ 2.932223] hub 1-0:1.0: USB hub found
[ 2.932239] hub 1-0:1.0: 8 ports detected
[ 2.932468] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.932508] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.932577] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.932590] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.932596] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.932703] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.932744] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 2.932911] usb usb2: configuration #1 chosen from 1 choice
[ 2.932966] hub 2-0:1.0: USB hub found
[ 2.932982] hub 2-0:1.0: 2 ports detected
[ 2.933150] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.933162] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.933170] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.933256] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.933290] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 2.933441] usb usb3: configuration #1 chosen from 1 choice
[ 2.933494] hub 3-0:1.0: USB hub found
[ 2.933508] hub 3-0:1.0: 2 ports detected
[ 2.933675] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.933687] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.933694] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.933777] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.933827] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 2.933985] usb usb4: configuration #1 chosen from 1 choice
[ 2.934039] hub 4-0:1.0: USB hub found
[ 2.934053] hub 4-0:1.0: 2 ports detected
[ 2.934214] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.934225] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.934232] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.934317] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.934362] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 2.934521] usb usb5: configuration #1 chosen from 1 choice
[ 2.934576] hub 5-0:1.0: USB hub found
[ 2.934591] hub 5-0:1.0: 2 ports detected
[ 2.934859] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.938503] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.939165] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.939178] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.939185] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.939192] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.939200] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.940092] mice: PS/2 mouse device common for all mice
[ 2.960143] rtc_cmos 00:08: RTC can wake from S4
[ 2.960213] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 2.960257] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.960397] device-mapper: uevent: version 1.0.3
[ 2.960605] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.960792] device-mapper: multipath: version 1.0.5 loaded
[ 2.960798] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.960996] EISA: Probing bus 0 at eisa.0
[ 2.961010] Cannot allocate resource for EISA slot 1
[ 2.961018] Cannot allocate resource for EISA slot 2
[ 2.961024] Cannot allocate resource for EISA slot 3
[ 2.961053] EISA: Detected 0 cards.
[ 2.961332] cpuidle: using governor ladder
[ 2.961564] cpuidle: using governor menu
[ 2.962609] TCP cubic registered
[ 2.962837] NET: Registered protocol family 10
[ 2.963666] lo: Disabled Privacy Extensions
[ 2.964355] NET: Registered protocol family 17
[ 2.964400] Bluetooth: L2CAP ver 2.11
[ 2.964404] Bluetooth: L2CAP socket layer initialized
[ 2.964410] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.964413] Bluetooth: SCO socket layer initialized
[ 2.964494] Bluetooth: RFCOMM socket layer initialized
[ 2.964511] Bluetooth: RFCOMM TTY layer initialized
[ 2.964514] Bluetooth: RFCOMM ver 1.10
[ 2.964584] Marking TSC unstable due to TSC halts in idle
[ 2.965801] Using IPI No-Shortcut mode
[ 2.965983] registered taskstats version 1
[ 2.966229] Magic number: 13:850:723
[ 2.966253] block loop3: hash matches
[ 2.966374] rtc_cmos 00:08: setting system clock to 2009-06-19 07:43:56 UTC (1245397436)
[ 2.966384] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.966388] EDD information not available.
[ 2.966806] Freeing unused kernel memory: 532k freed
[ 2.967116] Write protecting the kernel text: 4112k
[ 2.967223] Write protecting the kernel read-only data: 1524k
[ 2.990877] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.245065] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.421872] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.421917] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.421958] r8169 0000:02:00.0: setting latency timer to 64
[ 3.422199] r8169 0000:02:00.0: irq 2300 for MSI/MSI-X
[ 3.423601] eth0: RTL8102e at 0xf7c68000, 00:14:0b:62:1a:f0, XID 34a00000 IRQ 2300
[ 3.578427] usb 1-1: configuration #1 chosen from 1 choice
[ 3.724085] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 4.005018] usb 1-5: configuration #1 chosen from 1 choice
[ 4.048749] Initializing USB Mass Storage driver...
[ 4.050031] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4.050569] usbcore: registered new interface driver usb-storage
[ 4.050579] USB Mass Storage support registered.
[ 4.050766] usb-storage: device found at 3
[ 4.050772] usb-storage: waiting for device to settle before scanning
[ 4.145321] PM: Starting manual resume from disk
[ 4.145329] PM: Resume from partition 8:5
[ 4.145333] PM: Checking hibernation image.
[ 4.145709] PM: Resume from disk failed.
[ 4.202469] kjournald starting. Commit interval 5 seconds
[ 4.202500] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.364092] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 4.560749] usb 5-2: configuration #1 chosen from 1 choice
[ 9.048847] usb-storage: device scan complete
[ 9.051070] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 9.054092] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 9.054224] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 12.600114] udev: starting version 141
[ 12.866529] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[ 12.869061] ath_hal: module license 'Proprietary' taints kernel.
[ 12.873439] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 12.910608] wlan: 0.9.4
[ 12.933896] ath_pci: 0.9.4
[ 12.933982] ath_pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.934004] ath_pci 0000:07:00.0: setting latency timer to 64
[ 12.982466] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[ 12.982500] ath_pci 0000:07:00.0: PCI INT A disabled
[ 12.982828] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.002113] Linux agpgart interface v0.103
[ 13.077247] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 13.077559] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 13.080453] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 13.146893] intel_rng: FWH not detected
[ 13.637618] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.666101] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 13.666463] usbcore: registered new interface driver btusb
[ 13.738294] iTCO_vendor_support: vendor-support=0
[ 13.742295] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 13.742795] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 13.743061] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.792899] Linux video capture interface: v2.00
[ 13.854511] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0240)
[ 13.856149] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input8
[ 13.857477] usbcore: registered new interface driver uvcvideo
[ 13.857554] USB Video Class driver (v0.1.0)
[ 13.977146] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 14.132148] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.132323] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.157969] hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
[ 14.491772] lp: driver loaded but no devices found
[ 14.650922] Adding 2980016k swap on /dev/sda5. Priority:-1 extents:1 across:2980016k
[ 14.889884] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
[ 14.940539] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 15.463517] EXT3 FS on sda1, internal journal
[ 17.123261] type=1505 audit(1245397450.654:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2027
[ 17.123547] type=1505 audit(1245397450.654:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2027
[ 17.123662] type=1505 audit(1245397450.654:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2027
[ 17.123764] type=1505 audit(1245397450.654:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2027
[ 17.440406] type=1505 audit(1245397450.970:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2032
[ 17.440814] type=1505 audit(1245397450.970:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2032
[ 17.505379] type=1505 audit(1245397451.038:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2036
[ 21.157461] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.157471] Bluetooth: BNEP filters: protocol multicast
[ 21.228476] Bridge firewalling registered
[ 23.022526] ppdev: user-space parallel port driver
[ 24.222389] [drm] Initialized drm 1.1.0 20060810
[ 24.237251] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.237265] pci 0000:00:02.0: setting latency timer to 64
[ 24.237693] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 24.247253] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 24.247329] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 25.512771] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 26.468337] r8169: eth0: link up
[ 26.468348] r8169: eth0: link up
[ 37.416049] eth0: no IPv6 routers present
[ 41.507174] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 43.274507] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 94.995841] atkbd.c: Unknown key pressed (translated set 2, code 0x63 on isa0060/serio0).
[ 94.995860] atkbd.c: Use 'setkeycodes 63 <keycode>' to make it known.
[ 95.258477] atkbd.c: Unknown key released (translated set 2, code 0x63 on isa0060/serio0).
[ 95.258495] atkbd.c: Use 'setkeycodes 63 <keycode>' to make it known.

στο εικονίδιο της σύνδεσης δεν μου δειχνει τπτ περί ασύρματης δικτύωσης...

[linuxman]

Μιας και είναι φρέσκια εγκατάσταση δοκίμασε με καλώδιο να ανοίξεις όλες τις πηγές όπως θα δεις εδώ viewtopic.php?f=9&t=895 βίντεο 2 , κάνε ενημέρωση μετά ρεστάρτ και πριν φορτώσει να πατήσεις το συνδυασμό τον πλήκτρον
Μια δοκιμή μπορείς να κάνεις είναι μιας και έχεις παράθυρα μπες εκεί και πάτα το συνδυασμό εκεί .
μπορεί εκεί να το πάτησες και να το κλείσανε δίνοντας εντολή στην κάρτα μετά από κλείσιμο τους να την κλείνουν .