Πρόβλημα στο Ubuntu με Wireless σύνδεση

[xristosn]

αυτό θα προτεινα κι εγώ ασε το λιγο καιρο κι αν δουλευει καλά μην το πειραζεις

Καλησπέρα και πάλι,
Σήμερα δεν δούλευε και αποφάσισα να το προσπαθήσω. Έχω εγκαταστήσει το linux-restricted-modules και έψαξα και βρήκα την σελίδα αυτή: http://linux-wless.passys.nl/query_part ... &zoek=Show την δική μου την κάρτα δεν την υποστηρίζει αλλά σε παραπέμπει σε αυτή τη σελίδα να το κάνεις μόνο σου http://acx100.sourceforge.net/ οπότε σταμάτησα και από εδώ και πέρα νομίζω ότι αρχίζουν τα δύσκολα όπως λέει και το λαϊκό άσμα...
Περιμένω εκτός από οδηγίες και την υπομονή σας γιατί νομίζω ότι θα την χρειασθείτε μαζί μου. Ευχαριστώ και πάλι για το χρόνο σας.

[logari81]

οταν εκανες εγκατασταση τους driver των windows το ndiswrapper σου έβαλε σε blacklist τους κανονικους drivers, αυτό ειναιεπομενως το πρωτο που πρεπει να κοιταξουμε

δωσε μας το αποτελεσμα της εντολής

Κώδικας: Επιλογή όλων

cat /etc/modprobe.d/blacklist

[xristosn]

xristos@dalaki:~$ cat /etc/modprobe.d/blacklist
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

[logari81]

μπα δεν φαίνεται να ειναι σε blacklist για δες αν εχει φορτωθει το σχετικο module

Κώδικας: Επιλογή όλων

lsmod |grep acx

και προκαταβολικα ας σου ζητησω και κάτι ακομα, το αποτελεσμα τις εντολης

Κώδικας: Επιλογή όλων

dmesg

αλλά βαλτο μεσα σε

Κώδικας: Επιλογή όλων

εδω

για να μην γεμισει όλη την οθονη.

[xristosn]

Κώδικας: Επιλογή όλων

xristos@dalaki:~$ lsmod |grep acx
xristos@dalaki:~$

και

Κώδικας: Επιλογή όλων

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517875
[ 0.000000] Kernel command line: root=UUID=9564dfa9-c122-425a-95ed-bc78cb555392 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1496.714 MHz processor.
[ 7.766547] Console: colour VGA+ 80x25
[ 7.766553] console [tty0] enabled
[ 7.766982] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 7.767512] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 7.896347] Memory: 2057892k/2087808k available (2177k kernel code, 28608k reserved, 1006k data, 368k init, 1170304k highmem)
[ 7.896358] virtual kernel memory layout:
[ 7.896359] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 7.896361] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 7.896362] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 7.896363] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 7.896365] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 7.896366] .data : 0xc0320514 - 0xc041bdc4 (1006 kB)
[ 7.896368] .text : 0xc0100000 - 0xc0320514 (2177 kB)
[ 7.896372] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 7.896441] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 7.976457] Calibrating delay using timer specific routine.. 2996.91 BogoMIPS (lpj=5993837)
[ 7.976501] Security Framework initialized
[ 7.976512] SELinux: Disabled at boot.
[ 7.976538] AppArmor: AppArmor initialized
[ 7.976543] Failure registering capabilities with primary security module.
[ 7.976555] Mount-cache hash table entries: 512
[ 7.976754] Initializing cgroup subsys ns
[ 7.976761] Initializing cgroup subsys cpuacct
[ 7.976777] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 7.976792] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 7.976795] CPU: L2 cache: 2048K
[ 7.976799] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000
[ 7.976811] Compat vDSO mapped to ffffe000.
[ 7.976830] Checking 'hlt' instruction... OK.
[ 7.992935] SMP alternatives: switching to UP code
[ 7.995195] Freeing SMP alternatives: 11k freed
[ 7.995338] Early unpacking initramfs... done
[ 8.407912] ACPI: Core revision 20070126
[ 8.407991] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 8.436927] CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
[ 8.436949] Total of 1 processors activated (2996.91 BogoMIPS).
[ 8.437141] ENABLING IO-APIC IRQs
[ 8.437342] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 8.584401] Brought up 1 CPUs
[ 8.584432] CPU0 attaching sched-domain:
[ 8.584435] domain 0: span 01
[ 8.584437] groups: 01
[ 8.584630] net_namespace: 64 bytes
[ 8.584644] Booting paravirtualized kernel on bare hardware
[ 8.585162] Time: 20:38:11 Date: 09/24/08
[ 8.585192] NET: Registered protocol family 16
[ 8.585412] EISA bus registered
[ 8.585441] ACPI: bus type pci registered
[ 8.586004] PCI: PCI BIOS revision 2.10 entry at 0xfd850, last bus=7
[ 8.586007] PCI: Using configuration type 1
[ 8.586023] Setting up standard PCI resources
[ 8.596516] ACPI: EC: Look up EC in DSDT
[ 8.598070] ACPI: Interpreter enabled
[ 8.598074] ACPI: (supports S0 S3 S4 S5)
[ 8.598089] ACPI: Using IOAPIC for interrupt routing
[ 8.600761] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 8.604276] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 8.604280] ACPI: EC: driver started in interrupt mode
[ 8.604324] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 8.605130] Force enabled HPET at base address 0xfed00000
[ 8.605137] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 8.605142] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 8.605862] PCI: Transparent bridge - 0000:00:1e.0
[ 8.605947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 8.606206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 8.606354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 8.608825] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 8.608927] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 8.609025] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 8.609123] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 8.609220] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 8.609317] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 8.609414] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 8.609516] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 8.609642] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 8.609675] pnp: PnP ACPI init
[ 8.609682] ACPI: bus type pnp registered
[ 8.612379] pnp: PnP ACPI: found 8 devices
[ 8.612382] ACPI: ACPI bus type pnp unregistered
[ 8.612386] PnPBIOS: Disabled by ACPI PNP
[ 8.612622] PCI: Using ACPI for IRQ routing
[ 8.612625] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 8.612630] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 8.612633] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 8.612635] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 8.648350] NET: Registered protocol family 8
[ 8.648352] NET: Registered protocol family 20
[ 8.648530] hpet clockevent registered
[ 8.648537] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 8.648542] hpet0: 3 64-bit timers, 14318180 Hz
[ 8.649583] AppArmor: AppArmor Filesystem Enabled
[ 8.652338] Time: tsc clocksource has been installed.
[ 8.660376] system 00:04: ioport range 0x200-0x20f has been reserved
[ 8.660379] system 00:04: ioport range 0x800-0x80f has been reserved
[ 8.660383] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 8.660386] system 00:04: ioport range 0x1180-0x11bf has been reserved
[ 8.660390] system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved
[ 8.660394] system 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 8.660397] system 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 8.660401] system 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 8.660404] system 00:04: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 8.660408] system 00:04: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 8.690848] PCI: Bridge: 0000:00:1c.0
[ 8.690850] IO window: disabled.
[ 8.690856] MEM window: disabled.
[ 8.690861] PREFETCH window: disabled.
[ 8.690870] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 8.690872] IO window: 00003400-000034ff
[ 8.690878] IO window: 00003800-000038ff
[ 8.690884] PREFETCH window: 8c000000-8fffffff
[ 8.690889] MEM window: 90000000-93ffffff
[ 8.690895] PCI: Bridge: 0000:00:1e.0
[ 8.690898] IO window: 3000-3fff
[ 8.690904] MEM window: b0100000-b01fffff
[ 8.690908] PREFETCH window: disabled.
[ 8.690942] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 8.690951] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 8.690965] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 8.690983] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 8.690990] PCI: Setting latency timer of device 0000:06:06.0 to 64
[ 8.691002] NET: Registered protocol family 2
[ 8.728395] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 8.728657] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 8.729600] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 8.730164] TCP: Hash tables configured (established 131072 bind 65536)
[ 8.730168] TCP reno registered
[ 8.740512] checking if image is initramfs... it is
[ 9.152248] Switched to high resolution mode on CPU 0
[ 9.542252] Freeing initrd memory: 7327k freed
[ 9.542526] Simple Boot Flag at 0x36 set to 0x1
[ 9.543010] audit: initializing netlink socket (disabled)
[ 9.543029] audit(1222288691.516:1): initialized
[ 9.543287] highmem bounce pool size: 64 pages
[ 9.545521] VFS: Disk quotas dquot_6.5.1
[ 9.545611] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 9.545775] io scheduler noop registered
[ 9.545780] io scheduler anticipatory registered
[ 9.545783] io scheduler deadline registered
[ 9.545796] io scheduler cfq registered (default)
[ 9.545812] Boot video device is 0000:00:02.0
[ 9.546039] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 9.546096] assign_interrupt_mode Found MSI capability
[ 9.546147] Allocate Port Service[0000:00:1c.0:pcie00]
[ 9.546193] Allocate Port Service[0000:00:1c.0:pcie02]
[ 9.546471] isapnp: Scanning for PnP cards...
[ 9.900725] isapnp: No Plug & Play device found
[ 9.931422] Real Time Clock Driver v1.12ac
[ 9.931543] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.932418] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
[ 9.932429] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 9.933117] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 9.933199] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 9.933305] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 9.938650] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 9.941773] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.941778] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 9.941780] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 9.941783] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 9.941786] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 9.944045] mice: PS/2 mouse device common for all mice
[ 9.944175] EISA: Probing bus 0 at eisa.0
[ 9.944182] Cannot allocate resource for EISA slot 1
[ 9.944185] Cannot allocate resource for EISA slot 2
[ 9.944187] Cannot allocate resource for EISA slot 3
[ 9.944209] EISA: Detected 0 cards.
[ 9.944213] cpuidle: using governor ladder
[ 9.944215] cpuidle: using governor menu
[ 9.944329] NET: Registered protocol family 1
[ 9.944359] Using IPI No-Shortcut mode
[ 9.944399] registered taskstats version 1
[ 9.944527] Magic number: 8:525:650
[ 9.944567] hash matches device ptydf
[ 9.944641] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 9.944643] EDD information not available.
[ 9.944890] Freeing unused kernel memory: 368k freed
[ 9.971964] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 10.392316] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 10.592212] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 10.792242] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 10.992070] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 11.190072] fuse init (API version 7.9)
[ 11.214436] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 11.214444] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 11.217693] ACPI: Thermal Zone [THR0] (40 C)
[ 11.219535] ACPI: Invalid passive threshold
[ 11.220052] ACPI: Thermal Zone [THR1] (29 C)
[ 11.887437] usbcore: registered new interface driver usbfs
[ 11.887466] usbcore: registered new interface driver hub
[ 11.891417] usbcore: registered new device driver usb
[ 11.911382] USB Universal Host Controller Interface driver v3.0
[ 11.911455] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 11.911468] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.911473] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.911869] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 11.911905] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
[ 11.912057] usb usb1: configuration #1 chosen from 1 choice
[ 11.912087] hub 1-0:1.0: USB hub found
[ 11.912093] hub 1-0:1.0: 2 ports detected
[ 12.015453] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 12.015468] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 12.015473] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 12.015500] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 12.015534] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[ 12.015660] usb usb2: configuration #1 chosen from 1 choice
[ 12.015689] hub 2-0:1.0: USB hub found
[ 12.015695] hub 2-0:1.0: 2 ports detected
[ 12.044106] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 12.099557] SCSI subsystem initialized
[ 12.119431] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 12.119448] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 12.119453] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 12.119481] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 12.119514] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860
[ 12.119640] usb usb3: configuration #1 chosen from 1 choice
[ 12.119666] hub 3-0:1.0: USB hub found
[ 12.119672] hub 3-0:1.0: 2 ports detected
[ 12.163773] libata version 3.00 loaded.
[ 12.223390] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 22
[ 12.223406] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 12.223411] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 12.223440] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 12.223474] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880
[ 12.223608] usb usb4: configuration #1 chosen from 1 choice
[ 12.223635] hub 4-0:1.0: USB hub found
[ 12.223641] hub 4-0:1.0: 2 ports detected
[ 12.327475] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 12.327494] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 12.327498] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 12.327525] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 12.331436] ehci_hcd 0000:00:1d.7: debug port 1
[ 12.331443] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 12.331452] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0040000
[ 12.347601] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 12.347736] usb usb5: configuration #1 chosen from 1 choice
[ 12.347763] hub 5-0:1.0: USB hub found
[ 12.347770] hub 5-0:1.0: 8 ports detected
[ 12.451393] 8139cp 0000:06:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 12.451400] 8139cp 0000:06:07.0: Try the "8139too" driver instead.
[ 12.455268] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 21 (level, low) -> IRQ 23
[ 12.505076] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[b0107000-b01077ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 12.507686] 8139too Fast Ethernet driver 0.9.28
[ 12.514867] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 12.515776] eth0: RealTek RTL8139 at 0x3000, 00:0a:e4:d1:5f:39, IRQ 18
[ 12.515780] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 12.516394] ata_piix 0000:00:1f.1: version 2.12
[ 12.516409] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
[ 12.516449] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 12.517452] scsi0 : ata_piix
[ 12.517661] scsi1 : ata_piix
[ 12.518267] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 12.518270] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 12.899517] ata1.00: ATA-6: ST960821A, 3.02, max UDMA/100
[ 12.899522] ata1.00: 117210240 sectors, multi 16: LBA48
[ 12.899551] ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L532R, HA04, max MWDMA2
[ 12.915439] ata1.00: configured for UDMA/100
[ 12.927059] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 13.056263] usb 3-1: configuration #1 chosen from 1 choice
[ 13.074833] usbcore: registered new interface driver hiddev
[ 13.076893] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input2
[ 13.087462] ata1.01: configured for MWDMA2
[ 13.087516] ata2: port disabled. ignoring.
[ 13.087660] scsi 0:0:0:0: Direct-Access ATA ST960821A 3.02 PQ: 0 ANSI: 5
[ 13.088320] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L532R HA04 PQ: 0 ANSI: 5
[ 13.092119] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-1
[ 13.092133] usbcore: registered new interface driver usbhid
[ 13.092137] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 13.116348] Driver 'sd' needs updating - please use bus_type methods
[ 13.116438] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 13.116452] sd 0:0:0:0: [sda] Write Protect is off
[ 13.116455] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 13.116474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.116526] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 13.116537] sd 0:0:0:0: [sda] Write Protect is off
[ 13.116539] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 13.116557] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.116561] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 13.124263] sda1 sda2 sda3
[ 13.124852] sd 0:0:0:0: [sda] Attached SCSI disk
[ 13.131283] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 13.131304] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 13.138681] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 13.138686] Uniform CD-ROM driver Revision: 3.20
[ 13.138731] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 13.146990] Clocksource tsc unstable (delta = -18747701214 ns)
[ 13.150987] Time: hpet clocksource has been installed.
[ 13.234638] Attempting manual resume
[ 13.234643] swsusp: Resume From Partition 8:2
[ 13.234645] PM: Checking swsusp image.
[ 13.234801] PM: Resume from disk failed.
[ 13.251370] kjournald starting. Commit interval 5 seconds
[ 13.251381] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.293461] ieee1394: Host added: ID:BUS[0-00:1023] GUID[05e40a00e7545016]
[ 16.684399] Linux agpgart interface v0.102
[ 16.854570] intel_rng: FWH not detected
[ 16.874606] agpgart: Detected an Intel 915GM Chipset.
[ 16.875282] agpgart: Detected 7932K stolen memory.
[ 16.895692] agpgart: AGP aperture is 256M @ 0xc0000000
[ 16.938573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.986585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.170472] iTCO_vendor_support: vendor-support=0
[ 17.238294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 17.238401] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 17.238448] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.300821] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 17.610506] input: Power Button (FF) as /devices/virtual/input/input4
[ 17.623056] ACPI: Power Button (FF) [PWRF]
[ 17.623154] input: Lid Switch as /devices/virtual/input/input5
[ 17.634390] ACPI: Lid Switch [LID0]
[ 17.634483] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 17.646303] ACPI: Sleep Button (CM) [SLPB]
[ 17.646375] input: Power Button (CM) as /devices/virtual/input/input7
[ 17.658302] ACPI: Power Button (CM) [PWB]
[ 17.801320] ACPI: WMI-Acer: Mapper loaded
[ 18.050316] Yenta: CardBus bridge found at 0000:06:06.0 [103c:3081]
[ 18.050341] Yenta: Enabling burst memory read transactions
[ 18.050348] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 18.050350] Yenta: Routing CardBus interrupts to PCI
[ 18.050356] Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b02, devctl 0x64
[ 18.282921] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[ 18.282927] Socket status: 30000820
[ 18.282931] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 18.282937] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 18.282940] cs: IO port probe 0x3000-0x3fff: clean.
[ 18.283215] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[ 18.358170] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 22 (level, low) -> IRQ 17
[ 18.414092] sdhci: Secure Digital Host Controller Interface driver
[ 18.414096] sdhci: Copyright(c) Pierre Ossman
[ 18.424181] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 18.424205] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 22 (level, low) -> IRQ 17
[ 18.424222] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 18.424287] mmc0: SDHCI at 0xb0108000 irq 17 DMA
[ 18.424298] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 18.424349] mmc1: SDHCI at 0xb0107c00 irq 17 DMA
[ 18.424360] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 18.424403] mmc2: SDHCI at 0xb0107800 irq 17 DMA
[ 18.782740] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 18.793955] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.001902] pccard: CardBus card inserted into slot 0
[ 19.563341] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16
[ 19.563370] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 20.485440] intel8x0_measure_ac97_clock: measured 55451 usecs
[ 20.485445] intel8x0: clocking to 48000
[ 20.489938] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 20.689832] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 20.889667] ACPI: AC Adapter [AC] (on-line)
[ 21.030020] ACPI: Battery Slot [BAT0] (battery present)
[ 21.223645] input: PS/2 Mouse as /devices/virtual/input/input9
[ 21.266073] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input10
[ 22.393400] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 22.542888] ndiswrapper: driver tnet1130 (Texas Instruments,12/01/2004,7.0.1.33) loaded
[ 22.543101] PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
[ 22.543111] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 22.543611] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 22.665829] cs: IO port probe 0x100-0x3af: clean.
[ 22.667500] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 22.668227] cs: IO port probe 0x820-0x8ff: clean.
[ 22.668838] cs: IO port probe 0xc00-0xcf7: clean.
[ 22.669604] cs: IO port probe 0xa00-0xaff: clean.
[ 23.382398] ndiswrapper: using IRQ 17
[ 23.384484] wlan0: ethernet device 00:4f:62:04:7f:dd using NDIS driver: tnet1130, version: 0x7, NDIS version: 0x501, vendor: 'TNET1130', 104C:9066.5.conf
[ 23.384519] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 23.385281] usbcore: registered new interface driver ndiswrapper
[ 23.497380] lp: driver loaded but no devices found
[ 23.722228] Adding 1028152k swap on /dev/sda2. Priority:-1 extents:1 across:1028152k
[ 23.801946] EXT3 FS on sda1, internal journal
[ 23.941692] kjournald starting. Commit interval 5 seconds
[ 23.941869] EXT3 FS on sda3, internal journal
[ 23.941874] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.258079] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.512329] No dock devices found.
[ 25.339391] apm: BIOS not found.
[ 25.401911] ppdev: user-space parallel port driver
[ 25.422224] audit(1222288736.247:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4908 profile="/usr/sbin/cupsd" namespace="default"
[ 63.814315] Marking TSC unstable due to: cpufreq changes.
[ 64.884542] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 32.559264] Bluetooth: Core ver 2.11
[ 32.559954] NET: Registered protocol family 31
[ 32.559958] Bluetooth: HCI device and connection manager initialized
[ 32.559963] Bluetooth: HCI socket layer initialized
[ 32.588732] Bluetooth: L2CAP ver 2.9
[ 32.588739] Bluetooth: L2CAP socket layer initialized
[ 26.130893] Bluetooth: RFCOMM socket layer initialized
[ 26.130909] Bluetooth: RFCOMM TTY layer initialized
[ 26.130911] Bluetooth: RFCOMM ver 1.8
[ 27.712305] NET: Registered protocol family 17
[ 28.171191] [drm] Initialized drm 1.1.0 20060810
[ 28.174405] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 22
[ 28.174414] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 28.174486] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 73.482233] NET: Registered protocol family 10
[ 73.483208] lo: Disabled Privacy Extensions
[ 73.485089] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 77.744380] eth0: no IPv6 routers present
xristos@dalaki:~$

[linuxman]

Από βλέπω εδώ http://acx100.sourceforge.net/wiki/Distribution_list/Ubuntu#General_driver_information
και έχει αναφορά υπάρχουν οδηγοί μέσα στο The driver is made available under the linux-image-`uname -r` package, and the firmware under the linux-restricted-modules-`uname -r` package.
απλά δεν έχεις προφανώς ανοίξει όλα τα
Αποθετήρια (Repositories) - "ενεργοποίηση όλων των επίσημων" και αυτός είναι λόγος που δεν βρήκε την κάρτα .
Θα δοκίμασες το παρακάτω , uninstall ndiswrapper η έστω προσωρινά modprobe -r ndiswrapper και εάν βάλεις καλώδιο Ethernet να έχεις δίκτυο ανοίγεις Αποθετήρια (Repositories) με βάση τον παρακάτω οδηγό
Video αρχεία πως να εγκαταστήσετε προγράμματα στο Ubuntu .
μετά από Αποθετήρια θα πρέπει να εμφανιστεί στους Οδηγούς υλικού .
Δοκίμασε το και μας λες αν λειτουργεί .

[xristosn]

Θεωρητικά τουλάχιστον πρέπει να τα έχω όλα ενεργοποιημένα. Όταν έκανα για πρώτη φορά εγκατάσταση ακολούθησα τον οδηγό αυτό viewtopic.php?f=9&t=32 (Εγκατάσταση codec (ήχος,εικόνα,κτλ) σε 8.04) και μάλλον τα έχω όλα. Ωστόσο δεν φαίνεται να υπάρχει κάτι στους οδηγούς υλικού.

[linuxman]

Θεωρητικά τουλάχιστον πρέπει να τα έχω όλα ενεργοποιημένα. Όταν έκανα για πρώτη φορά εγκατάσταση ακολούθησα τον οδηγό αυτό viewtopic.php?f=9&t=32 (Εγκατάσταση codec (ήχος,εικόνα,κτλ) σε 8.04) και μάλλον τα έχω όλα. Ωστόσο δεν φαίνεται να υπάρχει κάτι στους οδηγούς υλικού.

Λογικά ναι για πόσταρε το αποτέλεσμα τις εντολής

Κώδικας: Επιλογή όλων

uname -a

[xristosn]

Κώδικας: Επιλογή όλων

xristos@dalaki:~$ uname -a
Linux dalaki 2.6.24-21-generic #1 SMP Mon Aug 25 17:32:09 UTC 2008 i686 GNU/Linux
xristos@dalaki:~$

Θα ζητήσω συγνώμη αλλά πρέπει να πάω για ύπνο. Θα συνεχίσω αύριο το απόγευμα. Καληνύχτα και ευχαριστώ πολύ και πάλι για την βοήθεια

[xristosn]

Μήπως ήρθε καμιά ιδέα...