Πρόβλημα με wireless  Το θέμα επιλύθηκε

...κάρτες δικτύου, modems, προβλήματα internet
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα των εντολών στο τερματικό :
lspci -nn
lsusb
rfkill list

Re: Πρόβλημα με wireless

Δημοσίευσηαπό georgegr77 » 02 Οκτ 2011, 20:32

Tο έκανα και αυτό αλλά πάλι τίποτα. Δεν το "βλέπει".
1 Linux: Αρχαριος ┃ Προγραμματισμός: Καθόλου ┃ Αγγλικά: Μετρια
2 Ubuntu 13.10 32bit (el_GR.UTF-8), Windows Vista, Windows XP Embedded
3 Intel Core2 Duo CPU T8100 2.10GHz ‖ RAM 2010 MiB ‖ Dell Inc. 0D501F - Dell Inc. XPS M1530
4 nVidia G84 [GeForce 8600M GT] [10de:0407] (rev a1)
5 eth0: Marvell 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
georgegr77
babeTUX
babeTUX
 
Δημοσιεύσεις: 50
Εγγραφή: 24 Ιουν 2008, 18:49
Εκτύπωση

Re: Πρόβλημα με wireless

Δημοσίευσηαπό the_eye » 02 Οκτ 2011, 20:38

Για ξαναδώσε
Κώδικας: Επιλογή όλων
lshw -class network

και επιλέον
Κώδικας: Επιλογή όλων
dmesg
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11724
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Πρόβλημα με wireless

Δημοσίευσηαπό georgegr77 » 02 Οκτ 2011, 20:48

Ελπίζω να το εκανα σωστά
Κώδικας: Επιλογή όλων
george@george-XPS-M1530:~$ lshw -class network
WARNING: you should run this program as super-user.
*-network
description: Ethernet interface
product: 88E8040 PCI-E Fast Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:09:00.0
logical name: eth0
version: 12
serial: 00:1d:09:52:14:bb
size: 100Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.28 duplex=full firmware=N/A ip=192.168.1.102 latency=0 multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:44 memory:f9ffc000-f9ffffff ioport:de00(size=256)
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11a/b/g
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:0b:00.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
resources: memory:f9efc000-f9efffff
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

[
Κώδικας: Επιλογή όλων
0.346669] pnp 00:00: [mem 0xf8000000-0xfebfffff window]
[ 0.346671] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
[ 0.346674] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
[ 0.346676] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
[ 0.346679] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
[ 0.346681] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
[ 0.346683] pnp 00:00: [mem 0xffc00000-0xffdfffff window]
[ 0.346775] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.346789] pnp 00:01: [io 0x004e-0x004f]
[ 0.346792] pnp 00:01: [io 0x0068-0x006f]
[ 0.346797] pnp 00:01: [mem 0xff800000-0xff8fffff]
[ 0.346800] pnp 00:01: [mem 0xffc00000-0xffcfffff]
[ 0.346870] system 00:01: [mem 0xff800000-0xff8fffff] has been reserved
[ 0.346873] system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved
[ 0.346876] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346905] pnp 00:02: [irq 12]
[ 0.346933] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.346951] pnp 00:03: [io 0x0060]
[ 0.346953] pnp 00:03: [io 0x0064]
[ 0.346955] pnp 00:03: [io 0x0062]
[ 0.346957] pnp 00:03: [io 0x0066]
[ 0.346963] pnp 00:03: [irq 1]
[ 0.346991] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.347008] pnp 00:04: [io 0x0070-0x0071]
[ 0.347014] pnp 00:04: [irq 8]
[ 0.347016] pnp 00:04: [io 0x0072-0x0077]
[ 0.347047] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.347066] pnp 00:05: [io 0x0061]
[ 0.347068] pnp 00:05: [io 0x0063]
[ 0.347070] pnp 00:05: [io 0x0065]
[ 0.347073] pnp 00:05: [io 0x0067]
[ 0.347102] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.347118] pnp 00:06: [io 0x0c80-0x0cff]
[ 0.347171] system 00:06: [io 0x0c80-0x0cff] could not be reserved
[ 0.347174] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.347194] pnp 00:07: [dma 4]
[ 0.347196] pnp 00:07: [io 0x0000-0x000f]
[ 0.347199] pnp 00:07: [io 0x0080-0x0085]
[ 0.347201] pnp 00:07: [io 0x0087-0x008f]
[ 0.347203] pnp 00:07: [io 0x00c0-0x00df]
[ 0.347205] pnp 00:07: [io 0x0010-0x001f]
[ 0.347207] pnp 00:07: [io 0x0090-0x0091]
[ 0.347209] pnp 00:07: [io 0x0093-0x009f]
[ 0.347240] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.347258] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.347265] pnp 00:08: [irq 13]
[ 0.347296] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.347338] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.347393] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.347397] system 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.347541] pnp 00:0a: [io 0x0900-0x097f]
[ 0.347543] pnp 00:0a: [io 0x0092]
[ 0.347545] pnp 00:0a: [io 0x00b2-0x00b3]
[ 0.347547] pnp 00:0a: [io 0x0020-0x0021]
[ 0.347549] pnp 00:0a: [io 0x00a0-0x00a1]
[ 0.347552] pnp 00:0a: [irq 0 disabled]
[ 0.347554] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.347556] pnp 00:0a: [io 0x1000-0x1005]
[ 0.347559] pnp 00:0a: [io 0x1008-0x100f]
[ 0.347578] pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.347581] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.347644] system 00:0a: [io 0x0900-0x097f] has been reserved
[ 0.347647] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.347650] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.347668] pnp 00:0b: [io 0xf400-0xf4fe]
[ 0.347671] pnp 00:0b: [io 0x0086]
[ 0.347673] pnp 00:0b: [io 0x1006-0x1007]
[ 0.347675] pnp 00:0b: [io 0x100a-0x1059]
[ 0.347677] pnp 00:0b: [io 0x1080-0x10bf]
[ 0.347679] pnp 00:0b: [io 0x10c0-0x10df]
[ 0.347681] pnp 00:0b: [io 0x1010-0x102f]
[ 0.347683] pnp 00:0b: [io 0x0809]
[ 0.347701] pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.347705] pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.347708] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.347776] system 00:0b: [io 0xf400-0xf4fe] has been reserved
[ 0.347779] system 00:0b: [io 0x1080-0x10bf] has been reserved
[ 0.347782] system 00:0b: [io 0x10c0-0x10df] has been reserved
[ 0.347785] system 00:0b: [io 0x0809] has been reserved
[ 0.347788] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.359455] pnp 00:0c: [mem 0x00000000-0x0009efff]
[ 0.359458] pnp 00:0c: [mem 0x0009f000-0x0009ffff]
[ 0.359460] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.359463] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.359465] pnp 00:0c: [mem 0x00100000-0x7fe71fff]
[ 0.359467] pnp 00:0c: [mem 0x7fe72000-0x7fefffff]
[ 0.359469] pnp 00:0c: [mem 0x7ff00000-0x7fffffff]
[ 0.359472] pnp 00:0c: [mem 0xffe00000-0xffffffff]
[ 0.359474] pnp 00:0c: [mem 0xffa00000-0xffbfffff]
[ 0.359476] pnp 00:0c: [mem 0xfec00000-0xfec0ffff]
[ 0.359478] pnp 00:0c: [mem 0xfee00000-0xfee0ffff]
[ 0.359480] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[ 0.359483] pnp 00:0c: [mem 0xfeda0000-0xfeda3fff]
[ 0.359485] pnp 00:0c: [mem 0xfeda4000-0xfeda4fff]
[ 0.359487] pnp 00:0c: [mem 0xfeda5000-0xfeda5fff]
[ 0.359489] pnp 00:0c: [mem 0xfeda6000-0xfeda6fff]
[ 0.359492] pnp 00:0c: [mem 0xfed18000-0xfed1bfff]
[ 0.359494] pnp 00:0c: [mem 0xf4000000-0xf7ffffff]
[ 0.359606] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved
[ 0.359610] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved
[ 0.359613] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.359616] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.359619] system 00:0c: [mem 0x00100000-0x7fe71fff] could not be reserved
[ 0.359622] system 00:0c: [mem 0x7fe72000-0x7fefffff] has been reserved
[ 0.359625] system 00:0c: [mem 0x7ff00000-0x7fffffff] has been reserved
[ 0.359628] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.359631] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved
[ 0.359634] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.359637] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.359640] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.359643] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 0.359646] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 0.359649] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 0.359652] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 0.359655] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 0.359658] system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.359663] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.359728] pnp: PnP ACPI: found 13 devices
[ 0.359730] ACPI: ACPI bus type pnp unregistered
[ 0.359734] PnPBIOS: Disabled by ACPI PNP
[ 0.396381] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.396387] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.396391] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.396395] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 0.396398] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.396402] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.396406] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.396410] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.396415] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
[ 0.396419] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.396426] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.396432] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.396440] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b]
[ 0.396444] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.396451] pci 0000:00:1c.1: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.396456] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.396465] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
[ 0.396469] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.396476] pci 0000:00:1c.4: bridge window [mem 0xf9c00000-0xf9dfffff]
[ 0.396481] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.396490] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.396492] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.396499] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff]
[ 0.396504] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.396536] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.396541] pci 0000:00:01.0: setting latency timer to 64
[ 0.396549] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.396555] pci 0000:00:1c.0: setting latency timer to 64
[ 0.396566] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.396571] pci 0000:00:1c.1: setting latency timer to 64
[ 0.396580] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.396585] pci 0000:00:1c.4: setting latency timer to 64
[ 0.396594] pci 0000:00:1e.0: setting latency timer to 64
[ 0.396599] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.396601] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.396604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.396606] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.396609] pci_bus 0000:00: resource 8 [mem 0x80000000-0xf3ffffff]
[ 0.396612] pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.396614] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
[ 0.396617] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
[ 0.396619] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
[ 0.396622] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
[ 0.396624] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
[ 0.396627] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff]
[ 0.396629] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.396632] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.396634] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.396637] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
[ 0.396640] pci_bus 0000:09: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.396643] pci_bus 0000:09: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.396645] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 0.396648] pci_bus 0000:0b: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.396650] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.396653] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
[ 0.396656] pci_bus 0000:0c: resource 1 [mem 0xf9c00000-0xf9dfffff]
[ 0.396658] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.396661] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff]
[ 0.396664] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.396666] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.396669] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.396671] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.396674] pci_bus 0000:03: resource 8 [mem 0x80000000-0xf3ffffff]
[ 0.396676] pci_bus 0000:03: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.396679] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
[ 0.396681] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
[ 0.396684] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
[ 0.396686] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff]
[ 0.396689] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff]
[ 0.396691] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff]
[ 0.396736] NET: Registered protocol family 2
[ 0.396810] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.397081] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.397530] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.397762] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.397764] TCP reno registered
[ 0.397767] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.397777] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.397854] NET: Registered protocol family 1
[ 0.398056] pci 0000:01:00.0: Boot video device
[ 0.398079] PCI: CLS 64 bytes, default 64
[ 0.398106] Simple Boot Flag at 0x79 set to 0x1
[ 0.398318] cpufreq-nforce2: No nForce2 chipset.
[ 0.398457] audit: initializing netlink socket (disabled)
[ 0.398468] type=2000 audit(1317587153.392:1): initialized
[ 0.408360] highmem bounce pool size: 64 pages
[ 0.408366] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.410335] VFS: Disk quotas dquot_6.5.2
[ 0.410400] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.411131] fuse init (API version 7.16)
[ 0.411232] msgmni has been set to 1678
[ 0.411484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.411513] io scheduler noop registered
[ 0.411515] io scheduler deadline registered
[ 0.411531] io scheduler cfq registered (default)
[ 0.411666] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.411704] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.411765] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.411822] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.411910] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.411969] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.412077] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.412134] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.412247] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.412272] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.412333] intel_idle: MWAIT substates: 0x3122220
[ 0.412335] intel_idle: does not run on family 6 model 23
[ 0.412419] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.412473] ACPI: AC Adapter [AC] (on-line)
[ 0.412552] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.592020] ACPI: Lid Switch [LID]
[ 0.592107] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.633168] Freeing initrd memory: 12524k freed
[ 0.648024] ACPI: Power Button [PBTN]
[ 0.648117] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.648123] ACPI: Sleep Button [SBTN]
[ 0.648363] ACPI: acpi_idle registered with cpuidle
[ 0.648605] Monitor-Mwait will be used to enter C-1 state
[ 0.648639] Monitor-Mwait will be used to enter C-2 state
[ 0.648670] Monitor-Mwait will be used to enter C-3 state
[ 0.648678] Marking TSC unstable due to TSC halts in idle
[ 0.650984] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.650987] ACPI: Thermal Zone [THM] (60 C)
[ 0.651017] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.651074] ERST: Table is not found!
[ 0.651338] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.668107] isapnp: Scanning for PnP cards...
[ 0.672228] ACPI: Battery Slot [BAT0] (battery present)
[ 1.023930] isapnp: No Plug & Play device found
[ 1.076429] Linux agpgart interface v0.103
[ 1.078012] brd: module loaded
[ 1.078682] loop: module loaded
[ 1.078771] i2c-core: driver [adp5520] using legacy suspend method
[ 1.078773] i2c-core: driver [adp5520] using legacy resume method
[ 1.078884] ata_piix 0000:00:1f.1: version 2.13
[ 1.078897] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.078940] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.079311] scsi0 : ata_piix
[ 1.079411] scsi1 : ata_piix
[ 1.079766] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 1.079769] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 1.079813] ata2: port disabled. ignoring.
[ 1.080189] Fixed MDIO Bus: probed
[ 1.080234] PPP generic driver version 2.4.2
[ 1.080277] tun: Universal TUN/TAP device driver, 1.6
[ 1.080279] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.080375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.080401] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.080413] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.080417] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.080458] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.080639] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.084527] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.084544] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.100018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.100160] hub 1-0:1.0: USB hub found
[ 1.100165] hub 1-0:1.0: 4 ports detected
[ 1.100253] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.100264] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.100268] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.100313] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.100370] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.104273] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.104288] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.120019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.120149] hub 2-0:1.0: USB hub found
[ 1.120153] hub 2-0:1.0: 6 ports detected
[ 1.120244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.120259] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.120281] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.120288] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.120292] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.120333] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.120379] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 1.120512] hub 3-0:1.0: USB hub found
[ 1.120516] hub 3-0:1.0: 2 ports detected
[ 1.120597] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.120604] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.120608] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.120651] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.120706] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 1.120839] hub 4-0:1.0: USB hub found
[ 1.120843] hub 4-0:1.0: 2 ports detected
[ 1.120922] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.120929] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.120933] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.120971] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.124054] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 1.124188] hub 5-0:1.0: USB hub found
[ 1.124192] hub 5-0:1.0: 2 ports detected
[ 1.124271] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.124278] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.124282] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.124320] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.124367] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 1.124507] hub 6-0:1.0: USB hub found
[ 1.124512] hub 6-0:1.0: 2 ports detected
[ 1.124592] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.124599] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.124603] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.124643] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.124688] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.124816] hub 7-0:1.0: USB hub found
[ 1.124820] hub 7-0:1.0: 2 ports detected
[ 1.124966] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.140424] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.140430] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.140558] mousedev: PS/2 mouse device common for all mice
[ 1.141550] rtc_cmos 00:04: RTC can wake from S4
[ 1.141613] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.141646] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.141731] device-mapper: uevent: version 1.0.3
[ 1.141815] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.141883] device-mapper: multipath: version 1.2.0 loaded
[ 1.141885] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.141961] EISA: Probing bus 0 at eisa.0
[ 1.141964] EISA: Cannot allocate resource for mainboard
[ 1.141966] Cannot allocate resource for EISA slot 1
[ 1.141968] Cannot allocate resource for EISA slot 2
[ 1.141970] Cannot allocate resource for EISA slot 3
[ 1.141972] Cannot allocate resource for EISA slot 4
[ 1.141974] Cannot allocate resource for EISA slot 5
[ 1.141976] Cannot allocate resource for EISA slot 6
[ 1.141978] Cannot allocate resource for EISA slot 7
[ 1.141979] Cannot allocate resource for EISA slot 8
[ 1.141981] EISA: Detected 0 cards.
[ 1.142106] cpuidle: using governor ladder
[ 1.142213] cpuidle: using governor menu
[ 1.142513] TCP cubic registered
[ 1.142653] NET: Registered protocol family 10
[ 1.143266] NET: Registered protocol family 17
[ 1.143284] Registering the dns_resolver key type
[ 1.144278] Using IPI No-Shortcut mode
[ 1.144376] PM: Hibernation image not present or could not be loaded.
[ 1.144387] registered taskstats version 1
[ 1.144754] Magic number: 15:669:446
[ 1.144859] rtc_cmos 00:04: setting system clock to 2011-10-02 20:25:54 UTC (1317587154)
[ 1.144862] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.144864] EDD information not available.
[ 1.168187] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.244498] ata1.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD05, max UDMA/33
[ 1.260363] ata1.00: configured for UDMA/33
[ 1.263245] scsi 0:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640A JD05 PQ: 0 ANSI: 5
[ 1.266819] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 1.266824] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.266987] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.267045] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.267193] Freeing unused kernel memory: 700k freed
[ 1.267503] Write protecting the kernel text: 5192k
[ 1.267565] Write protecting the kernel read-only data: 2148k
[ 1.290639] <30>udev[72]: starting version 167
[ 1.408726] sky2: driver version 1.28
[ 1.408766] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.408782] sky2 0000:09:00.0: setting latency timer to 64
[ 1.408815] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[ 1.408945] sky2 0000:09:00.0: irq 44 for MSI/MSI-X
[ 1.412048] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.414616] sdhci: Secure Digital Host Controller Interface driver
[ 1.414618] sdhci: Copyright(c) Pierre Ossman
[ 1.416179] sky2 0000:09:00.0: eth0: addr 00:1d:09:52:14:bb
[ 1.421874] sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 1.421898] sdhci-pci 0000:03:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.422933] mmc0: no vmmc regulator found
[ 1.423956] Registered led device: mmc0::
[ 1.429766] ahci 0000:00:1f.2: version 3.0
[ 1.429777] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.429826] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.429898] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 1.429901] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 1.429907] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.430034] mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA
[ 1.430379] firewire_ohci 0000:03:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.436693] scsi2 : ahci
[ 1.436793] scsi3 : ahci
[ 1.436884] scsi4 : ahci
[ 1.437072] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 45
[ 1.437074] ata4: DUMMY
[ 1.437078] ata5: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 45
[ 1.492166] firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 1.760132] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.760189] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.806409] ata3.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133
[ 1.806414] ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[ 1.807374] ata3.00: configured for UDMA/133
[ 1.807602] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5
[ 1.807813] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.807816] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.807880] sd 2:0:0:0: [sda] Write Protect is off
[ 1.807884] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.807909] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.854626] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.855149] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.904087] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 1.992171] firewire_core: created device fw0: GUID 364fc0001c4c5470, S400
[ 2.628053] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 2.776810] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.809803] hub 7-2:1.0: USB hub found
[ 2.811749] hub 7-2:1.0: 3 ports detected
[ 3.093758] usb 7-2.1: new full speed USB device using uhci_hcd and address 3
[ 3.305758] usb 7-2.2: new full speed USB device using uhci_hcd and address 4
[ 3.513761] usb 7-2.3: new full speed USB device using uhci_hcd and address 5
[ 10.640196] <30>udev[302]: starting version 167
[ 10.712527] Adding 2440188k swap on /dev/sda7. Priority:-1 extents:1 across:2440188k
[ 10.809933] lp: driver loaded but no devices found
[ 10.910203] lib80211: common routines for IEEE802.11 drivers
[ 10.910207] lib80211_crypt: registered algorithm 'NULL'
[ 10.930015] type=1400 audit(1317576364.281:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=466 comm="apparmor_parser"
[ 10.930912] type=1400 audit(1317576364.281:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=466 comm="apparmor_parser"
[ 10.931480] type=1400 audit(1317576364.281:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=466 comm="apparmor_parser"
[ 11.081096] r852 0000:03:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 11.083941] r852: driver loaded succesfully
[ 11.116160] Bluetooth: Core ver 2.15
[ 11.116207] NET: Registered protocol family 31
[ 11.116209] Bluetooth: HCI device and connection manager initialized
[ 11.116212] Bluetooth: HCI socket layer initialized
[ 11.128340] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 11.131230] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 11.133211] usbcore: registered new interface driver btusb
[ 11.135364] Linux video capture interface: v2.00
[ 11.163949] wl: module license 'MIXED/Proprietary' taints kernel.
[ 11.163952] Disabling lock debugging due to kernel taint
[ 11.182859] wl 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.182868] wl 0000:0b:00.0: setting latency timer to 64
[ 11.185387] malloc in abgphy done
[ 11.188735] malloc in abgphy done
[ 11.188858] eth%d: 5.100.82.38 driver failed with code 21
[ 11.197724] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[ 11.211285] input: Dell WMI hotkeys as /devices/virtual/input/input4
[ 11.217569] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 11.218912] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input5
[ 11.219044] usbcore: registered new interface driver uvcvideo
[ 11.219046] USB Video Class driver (v1.0.0)
[ 11.227248] acpi device:31: registered as cooling_device2
[ 11.227782] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input6
[ 11.227902] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 11.232209] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input7
[ 11.232446] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
[ 11.237109] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input8
[ 11.237474] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
[ 11.237807] usbcore: registered new interface driver usbhid
[ 11.237809] usbhid: USB HID core driver
[ 11.242379] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[ 11.268158] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 11.291944] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 11.292030] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 11.292064] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.552254] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.552484] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.552686] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.908585] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.908596] nvidia 0000:01:00.0: setting latency timer to 64
[ 11.908602] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 11.908728] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.30 Thu Apr 14 08:47:14 PDT 2011
[ 12.307467] vesafb: framebuffer at 0xfb000000, mapped to 0xf8300000, using 4032k, total 4032k
[ 12.307471] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 12.307472] vesafb: scrolling: redraw
[ 12.307475] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 12.307644] Console: switching to colour frame buffer device 160x50
[ 12.307673] fb0: VESA VGA frame buffer device
[ 12.309352] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 12.687685] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 13.208847] type=1400 audit(1317576366.561:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=877 comm="apparmor_parser"
[ 13.209617] type=1400 audit(1317576366.561:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=876 comm="apparmor_parser"
[ 13.214136] type=1400 audit(1317576366.565:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=877 comm="apparmor_parser"
[ 13.214710] type=1400 audit(1317576366.565:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=877 comm="apparmor_parser"
[ 13.217397] ppdev: user-space parallel port driver
[ 13.245329] type=1400 audit(1317576366.597:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=895 comm="apparmor_parser"
[ 13.257160] type=1400 audit(1317576366.609:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=895 comm="apparmor_parser"
[ 13.268565] type=1400 audit(1317576366.621:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=896 comm="apparmor_parser"
[ 13.348888] sky2 0000:09:00.0: eth0: enabling interface
[ 13.349219] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.473795] Bluetooth: L2CAP ver 2.15
[ 13.473798] Bluetooth: L2CAP socket layer initialized
[ 13.498795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.498798] Bluetooth: BNEP filters: protocol multicast
[ 13.504059] Bluetooth: SCO (Voice Link) ver 0.6
[ 13.504061] Bluetooth: SCO socket layer initialized
[ 13.567894] Bluetooth: RFCOMM TTY layer initialized
[ 13.567902] Bluetooth: RFCOMM socket layer initialized
[ 13.567903] Bluetooth: RFCOMM ver 1.11
[ 14.241621] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 14.415683] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 16.174679] sky2 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 16.883460] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.841087] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 18.844252] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 27.824057] eth0: no IPv6 routers present
[ 43.640455] sky2 0000:09:00.0: eth0: Link is down
[ 49.612046] CE: hpet increased min_delta_ns to 20113 nsec
[ 122.406008] sky2 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
1 Linux: Αρχαριος ┃ Προγραμματισμός: Καθόλου ┃ Αγγλικά: Μετρια
2 Ubuntu 13.10 32bit (el_GR.UTF-8), Windows Vista, Windows XP Embedded
3 Intel Core2 Duo CPU T8100 2.10GHz ‖ RAM 2010 MiB ‖ Dell Inc. 0D501F - Dell Inc. XPS M1530
4 nVidia G84 [GeForce 8600M GT] [10de:0407] (rev a1)
5 eth0: Marvell 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
georgegr77
babeTUX
babeTUX
 
Δημοσιεύσεις: 50
Εγγραφή: 24 Ιουν 2008, 18:49
Εκτύπωση

Re: Πρόβλημα με wireless

Δημοσίευσηαπό medigeek » 02 Οκτ 2011, 21:13

Δώσε:
Κώδικας: Επιλογή όλων

lsmod
jockey-text -l
uname -a
apt-cache policy linux-image-2.6.38-11-generic ubuntu-desktop
Κύπριος; Κόπιασε στο ubuntu-cy! ┃ Launchpad Debian Github
Οδηγός για νεοεισερχόμενους -- Αρχικές οδηγίες για αρχάριους χρήστες του Ubuntu

1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.10 quantal 3.5.0-21-generic 64bit (en_US.UTF-8, GNOME cinnamon2d), Ubuntu 3.5.0-19-generic, Windows 7
3 Intel Core2 Duo CPU E6550 2.33GHz ‖ RAM 5970 MiB ‖ MSI MS-7235
4 nVidia G73 [GeForce 7300 GT] [10de:0393] {nvidia}
5 eth0: Realtek RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Άβαταρ μέλους
medigeek
Freedom
Freedom
 
Δημοσιεύσεις: 5023
Εγγραφή: 24 Μάιος 2008, 14:49
Τοποθεσία: Σερβία/Κύπρος
Launchpad: medigeek
IRC: savvas
Εκτύπωση

Re: Πρόβλημα με wireless

Δημοσίευσηαπό the_eye » 02 Οκτ 2011, 21:20

και αυτό
Κώδικας: Επιλογή όλων
sudo apt-get install bcmwl-kernel-source
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11724
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Πρόβλημα με wireless

Δημοσίευσηαπό georgegr77 » 02 Οκτ 2011, 21:43

Κώδικας: Επιλογή όλων
george@george-XPS-M1530:~$ lsmode
Δε βρέθηκε εντολή 'lsmode', μήπως εννοούσατε:
Εντολή 'lsmod' από το πακέτο 'module-init-tools' (main)
lsmode: η εντολή δε βρέθηκε
george@george-XPS-M1530:~$ jockey-text -l
xorg:nvidia_173 - Οδηγός γραφικών της NVIDIA (Ιδιοταγής, Ενεργοποιημένο, Δεν είναι σε χρήση)
kmod:wl - Οδηγός ασύρματου δικτύου Broadcom STA (Ιδιοταγής, Ενεργοποιημένο, Σε χρήση) [auto-install]
xorg:nvidia_current - Οδηγός γραφικών της NVIDIA (Ιδιοταγής, Απενεργοποιημένο, Δεν είναι σε χρήση)
george@george-XPS-M1530:~$ uname -a
Linux george-XPS-M1530 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux
george@george-XPS-M1530:~$ apt-cache policy linux-image-2.6.38-11-generic ubuntu-desktop
ubuntu-desktop:
Εγκατεστημένα: 1.220
Υποψήφιο: 1.220
Πίνακας Έκδοσης:
*** 1.220 0
500 http://gr.archive.ubuntu.com/ubuntu/ natty/main i386 Packages
100 /var/lib/dpkg/status
linux-image-2.6.38-11-generic:
Εγκατεστημένα: (κανένα)
Υποψήφιο: 2.6.38-11.50
Πίνακας Έκδοσης:
2.6.38-11.50 0
500 http://gr.archive.ubuntu.com/ubuntu/ natty-updates/main i386 Packages
500 http://security.ubuntu.com/ubuntu/ natty-security/main i386 Packages

Κώδικας: Επιλογή όλων
george@george-XPS-M1530:~$ sudo apt-get install bcmwl-kernel-source
[sudo] password for george:
Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε
Κατασκευή Δένδρου Εξαρτήσεων
Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε
το bcmwl-kernel-source είναι ήδη η τελευταία έκδοση.
0 αναβαθμίστηκαν, 0 νέο εγκατεστημένα, 0 θα αφαιρεθούν και 221 δεν αναβαθμίζονται.
george@george-XPS-M1530:~$
1 Linux: Αρχαριος ┃ Προγραμματισμός: Καθόλου ┃ Αγγλικά: Μετρια
2 Ubuntu 13.10 32bit (el_GR.UTF-8), Windows Vista, Windows XP Embedded
3 Intel Core2 Duo CPU T8100 2.10GHz ‖ RAM 2010 MiB ‖ Dell Inc. 0D501F - Dell Inc. XPS M1530
4 nVidia G84 [GeForce 8600M GT] [10de:0407] (rev a1)
5 eth0: Marvell 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
georgegr77
babeTUX
babeTUX
 
Δημοσιεύσεις: 50
Εγγραφή: 24 Ιουν 2008, 18:49
Εκτύπωση

Re: Πρόβλημα με wireless

Δημοσίευσηαπό the_eye » 02 Οκτ 2011, 21:55

Δώσε και
Κώδικας: Επιλογή όλων
sudo apt-get install b43-fwcutter

και (την έδωσες λάθος πριν)
Κώδικας: Επιλογή όλων
lsmod
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11724
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Πρόβλημα με wireless

Δημοσίευσηαπό georgegr77 » 02 Οκτ 2011, 22:00

Κώδικας: Επιλογή όλων
george@george-XPS-M1530:~$ sudo apt-get install bcmwl-kernel-source
[sudo] password for george:
Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε
Κατασκευή Δένδρου Εξαρτήσεων
Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε
το bcmwl-kernel-source είναι ήδη η τελευταία έκδοση.
0 αναβαθμίστηκαν, 0 νέο εγκατεστημένα, 0 θα αφαιρεθούν και 221 δεν αναβαθμίζονται.
george@george-XPS-M1530:~$ sudo apt-get install b43-fwcutter
[sudo] password for george:
Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε
Κατασκευή Δένδρου Εξαρτήσεων
Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε
το b43-fwcutter είναι ήδη η τελευταία έκδοση.
το b43-fwcutter έχει εγκατασταθεί με το χέρι
0 αναβαθμίστηκαν, 0 νέο εγκατεστημένα, 0 θα αφαιρεθούν και 221 δεν αναβαθμίζοντα


george@george-XPS-M1530:~$ sudo apt-get install b43-fwcutter
[sudo] password for george:
Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε
Κατασκευή Δένδρου Εξαρτήσεων
Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε
το b43-fwcutter είναι ήδη η τελευταία έκδοση.
το b43-fwcutter έχει εγκατασταθεί με το χέρι
0 αναβαθμίστηκαν, 0 νέο εγκατεστημένα, 0 θα αφαιρεθούν και 221 δεν αναβαθμίζονται.
Κώδικας: Επιλογή όλων
george@george-XPS-M1530:~$ lsmod
Module Size Used by
binfmt_misc 13213 1
rfcomm 38125 8
sco 17779 2
bnep 17785 2
l2cap 48656 16 rfcomm,bnep
parport_pc 32111 0
ppdev 12849 0
vesafb 13449 1
nvidia 7098106 36
snd_hda_codec_idt 60537 1
snd_hda_intel 24140 2
snd_hda_codec 90901 2 snd_hda_codec_idt,snd_hda_intel
joydev 17322 0
snd_hwdep 13274 1 snd_hda_codec
snd_pcm 80244 2 snd_hda_intel,snd_hda_codec
snd_seq_midi 13132 0
usbhid 41704 0
dell_wmi 12601 0
uvcvideo 66851 0
snd_rawmidi 25269 1 snd_seq_midi
wl 2642531 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event
dell_laptop 13515 0
sparse_keymap 13666 1 dell_wmi
snd_timer 28659 2 snd_pcm,snd_seq
snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq
btusb 18160 2
dcdbas 14054 1 dell_laptop
bluetooth 65565 9 rfcomm,sco,bnep,l2cap,btusb
video 18951 0
r852 17878 0
hid 77084 1 usbhid
snd 55295 13 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
sm_common 16737 1 r852
nand 49822 2 r852,sm_common
nand_ids 8547 1 nand
nand_ecc 13070 1 nand
lib80211 14570 1 wl
videodev 75143 1 uvcvideo
mtd 26720 2 sm_common,nand
psmouse 73312 0
serio_raw 12990 0
soundcore 12600 1 snd
snd_page_alloc 14073 2 snd_hda_intel,snd_pcm
lp 13349 0
parport 36746 3 parport_pc,ppdev,lp
ahci 21591 3
firewire_ohci 31504 0
sdhci_pci 13623 0
libahci 25548 1 ahci
sdhci 22720 1 sdhci_pci
firewire_core 56138 1 firewire_ohci
sky2 49172 0
crc_itu_t 12627 1 firewire_core
george@george-XPS-M1530:~$
1 Linux: Αρχαριος ┃ Προγραμματισμός: Καθόλου ┃ Αγγλικά: Μετρια
2 Ubuntu 13.10 32bit (el_GR.UTF-8), Windows Vista, Windows XP Embedded
3 Intel Core2 Duo CPU T8100 2.10GHz ‖ RAM 2010 MiB ‖ Dell Inc. 0D501F - Dell Inc. XPS M1530
4 nVidia G84 [GeForce 8600M GT] [10de:0407] (rev a1)
5 eth0: Marvell 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
georgegr77
babeTUX
babeTUX
 
Δημοσιεύσεις: 50
Εγγραφή: 24 Ιουν 2008, 18:49
Εκτύπωση

Re: Πρόβλημα με wireless

Δημοσίευσηαπό medigeek » 02 Οκτ 2011, 23:54

Το driver είναι ενεργοποιημένο (wl) αλλά για κάποιο λόγο δεν επικοινωνεί (;) με τη συσκευή...

- Δώσε:
Κώδικας: Επιλογή όλων
sudo modprobe -rv wl
sudo modprobe -v wl
dmesg|tail -n 40
lshw -C network

Δούλεψε;

- Έκανες αναβάθμιση από 10.04 ή καθαρή εγκατάσταση;
Επίσης, δοκίμασε να κατεβάσεις τις τελευταίες εκδόσεις όλων των πακέτων:
Κώδικας: Επιλογή όλων
sudo apt-get update
sudo apt-get dist-upgrade

Κάνε επανεκκίνηση και δες αν διορθώθηκε.

- Τέλος, δοκίμασε να αφαιρέσεις/απενεργοποιήσεις το driver από το "Hardware drivers":
Κώδικας: Επιλογή όλων
jockey-gtk

Επανεκκίνησε και δοκίμασε ξανά. Αυτό θα πρέπει να ενεργοποιήσει τον οδηγό που εγκατέστησες με τη βοήθεια του the_eye
Κύπριος; Κόπιασε στο ubuntu-cy! ┃ Launchpad Debian Github
Οδηγός για νεοεισερχόμενους -- Αρχικές οδηγίες για αρχάριους χρήστες του Ubuntu

1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.10 quantal 3.5.0-21-generic 64bit (en_US.UTF-8, GNOME cinnamon2d), Ubuntu 3.5.0-19-generic, Windows 7
3 Intel Core2 Duo CPU E6550 2.33GHz ‖ RAM 5970 MiB ‖ MSI MS-7235
4 nVidia G73 [GeForce 7300 GT] [10de:0393] {nvidia}
5 eth0: Realtek RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Άβαταρ μέλους
medigeek
Freedom
Freedom
 
Δημοσιεύσεις: 5023
Εγγραφή: 24 Μάιος 2008, 14:49
Τοποθεσία: Σερβία/Κύπρος
Launchpad: medigeek
IRC: savvas
Εκτύπωση

Re: Πρόβλημα με wireless

Δημοσίευσηαπό xaris2335 » 03 Οκτ 2011, 10:47

Sorry που επεμβαίνω αλλά, βλέποντας αυτό και αυτόκατέληξα σε αυτό το συμπέρασμα
Κώδικας: Επιλογή όλων
sudo apt-get install firmware-b43-installer

φίλε περίμενε να πουν και οι άλλοι τη γνώμη τους οκ ;)
Spoiler: show
Γνώσεις ⇛ Linux: | Προγραμματισμός:
Αγγλικά: καλά
Λειτουργικό ⇛ Ubuntu 10.04 LTS (32bit) ΕΛ σε Intel core 2 quad core Q9300
Προδιαγραφές ⇛INTEL CORE 2 QUAD CORE Q9300 2.50 GHZ LGA|WESTERN DIGITAL 750GB SATA2|ASUS 2GB DDR3 1333MHZ|GIGABYTE|ASUS EN9800GTX/HTDP 512MB PCI-E|Quickcam logitech E2500|Optiarc DVD RW AD-7173A

Κανάλι για Λίνουξ και όχι μόνο :lol: Διανομές Λίνουξ :lol:Συμβατότητα περιφ/κών με ubuntu :lol:
Άβαταρ μέλους
xaris2335
powerTUX
powerTUX
 
Δημοσιεύσεις: 1962
Εγγραφή: 10 Οκτ 2008, 16:16
Εκτύπωση

ΠροηγούμενηΕπόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet