από KostasA » 17 Ιούλ 2012, 23:03
από KostasA » 18 Ιούλ 2012, 08:05
00:00.0 Host bridge [0600]: Intel Corporation 82845 845 [Brookdale] Chipset
Host Bridge [8086:1a30] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 [Brookdale] Chipset
AGP Bridge [8086:1a31] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e]
(rev 12)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC)
[8086:2440] (rev 12)
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller
[8086:244b] (rev 12)
00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB
Controller #1 [8086:2442] (rev 12)
00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB
Controller #1 [8086:2444] (rev 12)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM
AC'97 Audio Controller [8086:2445] (rev 12)
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV5M64 [RIVA
TNT2 Model 64/Model 64 Pro] [10de:002d] (rev 15)
02:0a.0 Ethernet controller [0200]: Sundance Technology Inc / IC Plus Corp IC
Plus IP100A Integrated 10/100 Ethernet MAC + PHY [13f0:0200] (rev 31)
02:0b.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 62)
02:0b.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 62)
02:0b.2 USB Controller [0c03]: VIA Technologies, In
Bus 005 Device 003: ID 12f7:1a00
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 192f:0416
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
*-network DISABLED
description: Ethernet interface
product: IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY
vendor: Sundance Technology Inc / IC Plus Corp
physical id: a
bus info: pci@0000:02:0a.0
logical name: eth0
version: 31
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical
configuration: broadcast=yes driver=sundance latency=32
module=sundance multicast=yes
auto lo
iface lo inet loopback
Module Size Used by
af_packet 23812 0
nls_iso8859_1 4992 1
nls_cp437 6656 1
vfat 14464 1
fat 54556 1 vfat
ipv6 267780 8
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
speedstep_lib 6532 0
cpufreq_userspace 5284 0
cpufreq_ondemand 9740 0
cpufreq_powersave 2688 0
cpufreq_conservative 8712 0
cpufreq_stats 7104 0
freq_table 5536 2 cpufreq_ondemand,cpufreq_stats
container 5632 0
video 19856 0
output 4736 1 video
dock 11280 0
sbs 15112 0
sbshc 7680 1 sbs
battery 14212 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
ac 6916 0
lp 12324 0
evdev 13056 4
snd_mpu401 9448 0
snd_mpu401_uart 9728 1 snd_mpu401
parport_pc 36260 1
parport 37832 3 ppdev,lp,parport_pc
analog 13600 0
gameport 16008 1 analog
snd_intel8x0 35356 3
snd_ac97_codec 101028 1 snd_intel8x0
ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4868 0
i2c_core 24832 0
pcspkr 4224 0
snd_seq_oss 35584 0
snd_seq_midi 9376 0
snd_rawmidi 25760 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
button 9232 0
snd 56996 19
snd_mpu401,snd_mpu401_uart,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd
_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti
mer,snd_seq_device
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
soundcore 8800 1 snd
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
shpchp 34452 0
pci_hotplug 30880 1 shpchp
intel_agp 25492 1
agpgart 34760 1 intel_agp
ext3 136712 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
usbhid 31872 0
hid 38784 1 usbhid
sg 36880 0
usb_storage 73664 1
libusual 19108 1 usb_storage
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 5
ata_generic 8324 0
pata_acpi 8320 0
floppy 59588 0
ata_piix 19588 2
libata 159344 3 ata_generic,pata_acpi,ata_piix
ehci_hcd 37900 0
uhci_hcd 27024 0
scsi_mod 151436 5 sg,usb_storage,sr_mod,sd_mod,libata
sundance 24128 0
mii 6400 1 sundance
usbcore 146028 6 usbhid,usb_storage,libusual,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 2 thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 3
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version
4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008
(Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
[ 0.000000] BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 127MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 32752) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 32752
[ 0.000000] HighMem 32752 -> 32752
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 32752
[ 0.000000] On node 0 totalpages: 32752
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 223 pages used for memmap
[ 0.000000] Normal zone: 28433 pages, LIFO batch:7
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6BA0 checksum 0
[ 0.000000] ACPI: RSDP 000F6BA0, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 07FF3000, 0028 (r1 IntelR AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: FACP 07FF3040, 0074 (r1 IntelR AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: DSDT 07FF30C0, 3AA3 (r1 INTELR AWRDACPI 1000
MSFT 100000C)
[ 0.000000] ACPI: FACS 07FF0000, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at 10000000 (gap:
08000000:f7b00000)
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 32497
[ 0.000000] Kernel command line:
root=UUID=af20c656-20fe-493c-92ec-7ce16804a38e ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0110b000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] Detected 1703.953 MHz processor.
[ 18.311584] Console: colour VGA+ 80x25
[ 18.311592] console [tty0] enabled
[ 18.311779] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 18.311932] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 18.317201] Memory: 117528k/131008k available (2157k kernel code,
12936k reserved, 998k data, 364k init, 0k highmem)
[ 18.317215] virtual kernel memory layout:
[ 18.317217] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 18.317219] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.317221] vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB)
[ 18.317223] lowmem : 0xc0000000 - 0xc7ff0000 ( 127 MB)
[ 18.317225] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 18.317226] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 18.317228] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 18.317233] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 18.317292] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 18.397195] Calibrating delay using timer specific routine.. 3411.80
BogoMIPS (lpj=6823609)
[ 18.397239] Security Framework initialized
[ 18.397251] SELinux: Disabled at boot.
[ 18.397276] AppArmor: AppArmor initialized
[ 18.397283] Failure registering capabilities with primary security module.
[ 18.397296] Mount-cache hash table entries: 512
[ 18.397550] CPU: After generic identify, caps: 3febf9ff 00000000 00000000
00000000 00000000 00000000 00000000 00000000
[ 18.397573] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 18.397578] CPU: L2 cache: 256K
[ 18.397582] CPU: Hyper-Threading is disabled
[ 18.397586] CPU: After all inits, caps: 3febf9ff 00000000 00000000
0000b080 00000000 00000000 00000000 00000000
[ 18.397611] Compat vDSO mapped to ffffe000.
[ 18.397639] Checking 'hlt' instruction... OK.
[ 18.413827] SMP alternatives: switching to UP code
[ 18.416581] Freeing SMP alternatives: 11k freed
[ 18.416834] Early unpacking initramfs... done
[ 18.978515] ACPI: Core revision 20070126
[ 18.978624] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 18.981338] ACPI: setting ELCR to 0200 (from 1a20)
[ 18.982967] CPU0: Intel(R) Pentium(R) 4 CPU 1700MHz stepping 0a
[ 18.982980] SMP motherboard not detected.
[ 18.982984] Local APIC not detected. Using dummy APIC emulation.
[ 18.983070] Brought up 1 CPUs
[ 18.983107] CPU0 attaching sched-domain:
[ 18.983113] domain 0: span 01
[ 18.983116] groups: 01
[ 18.983549] net_namespace: 64 bytes
[ 18.983564] Booting paravirtualized kernel on bare hardware
[ 18.984677] Time: 20:35:01 Date: 07/17/12
[ 18.984738] NET: Registered protocol family 16
[ 18.985194] EISA bus registered
[ 18.985223] ACPI: bus type pci registered
[ 19.011130] PCI: PCI BIOS revision 2.10 entry at 0xfb0f0, last bus=2
[ 19.011135] PCI: Using configuration type 1
[ 19.011137] Setting up standard PCI resources
[ 19.014646] ACPI: EC: Look up EC in DSDT
[ 19.019935] ACPI: Interpreter enabled
[ 19.019944] ACPI: (supports S0 S1 S4 S5)
[ 19.019971] ACPI: Using PIC for interrupt routing
[ 19.029259] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.029591] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 19.029598] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 19.030447] PCI: Transparent bridge - 0000:00:1e.0
[ 19.030492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.030727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 19.050084] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14
15)
[ 19.050259] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 19.050428] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 19.050600] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 19.050767] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 19.050935] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 19.051103] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 19.051271] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 19.051560] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.051629] pnp: PnP ACPI init
[ 19.051651] ACPI: bus type pnp registered
[ 19.058122] pnp: PnP ACPI: found 14 devices
[ 19.058129] ACPI: ACPI bus type pnp unregistered
[ 19.058138] PnPBIOS: Disabled by ACPI PNP
[ 19.058619] PCI: Using ACPI for IRQ routing
[ 19.058629] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 19.084126] NET: Registered protocol family 8
[ 19.084132] NET: Registered protocol family 20
[ 19.084306] AppArmor: AppArmor Filesystem Enabled
[ 19.088102] Time: tsc clocksource has been installed.
[ 19.096211] system 00:00: iomem range 0xca800-0xcbfff has been reserved
[ 19.096217] system 00:00: iomem range 0xf0000-0xf7fff could not be
reserved
[ 19.096221] system 00:00: iomem range 0xf8000-0xfbfff could not be
reserved
[ 19.096225] system 00:00: iomem range 0xfc000-0xfffff could not be
reserved
[ 19.096230] system 00:00: iomem range 0x7ff0000-0x7ffffff could not be
reserved
[ 19.096234] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 19.096238] system 00:00: iomem range 0x100000-0x7feffff could not be
reserved
[ 19.096243] system 00:00: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 19.096247] system 00:00: iomem range 0xffb00000-0xffb7ffff could not be
reserved
[ 19.096252] system 00:00: iomem range 0xfff00000-0xffffffff could not be
reserved
[ 19.096256] system 00:00: iomem range 0xe0000-0xeffff has been reserved
[ 19.096270] system 00:02: ioport range 0xb78-0xb7b has been reserved
[ 19.096275] system 00:02: ioport range 0xf78-0xf7b has been reserved
[ 19.096278] system 00:02: ioport range 0xa78-0xa7b has been reserved
[ 19.096282] system 00:02: ioport range 0xe78-0xe7b has been reserved
[ 19.096286] system 00:02: ioport range 0xbbc-0xbbf has been reserved
[ 19.096290] system 00:02: ioport range 0xfbc-0xfbf has been reserved
[ 19.096294] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 19.096297] system 00:02: ioport range 0x294-0x297 has been reserved
[ 19.127181] PCI: Bridge: 0000:00:01.0
[ 19.127187] IO window: disabled.
[ 19.127194] MEM window: e6000000-e7ffffff
[ 19.127200] PREFETCH window: e4000000-e5ffffff
[ 19.127209] PCI: Bridge: 0000:00:1e.0
[ 19.127214] IO window: c000-cfff
[ 19.127222] MEM window: e8000000-e9ffffff
[ 19.127228] PREFETCH window: disabled.
[ 19.127253] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 19.127280] NET: Registered protocol family 2
[ 19.164154] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 19.164564] TCP established hash table entries: 4096 (order: 3, 32768
bytes)
[ 19.164614] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 19.164660] TCP: Hash tables configured (established 4096 bind 4096)
[ 19.164665] TCP reno registered
[ 19.176238] checking if image is initramfs...<7>Switched to high resolution
mode on CPU 0
[ 19.686350] it is
[ 20.270425] Freeing initrd memory: 7702k freed
[ 20.271461] audit: initializing netlink socket (disabled)
[ 20.271493] audit(1342557302.960:1): initialized
[ 20.275431] VFS: Disk quotas dquot_6.5.1
[ 20.275606] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.275926] io scheduler noop registered
[ 20.275932] io scheduler anticipatory registered
[ 20.275935] io scheduler deadline registered
[ 20.275966] io scheduler cfq registered (default)
[ 20.276030] Boot video device is 0000:01:00.0
[ 20.276638] isapnp: Scanning for PnP cards...
[ 20.630435] isapnp: No Plug & Play device found
[ 20.732191] Real Time Clock Driver v1.12ac
[ 20.732370] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 20.732562] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.732923] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 20.734589] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.735451] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 20.737242] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 20.737677] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 20.737916] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 20.737922] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 20.738717] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.749533] mice: PS/2 mouse device common for all mice
[ 20.749798] EISA: Probing bus 0 at eisa.0
[ 20.749824] Cannot allocate resource for EISA slot 4
[ 20.749844] EISA: Detected 0 cards.
[ 20.749851] cpuidle: using governor ladder
[ 20.749854] cpuidle: using governor menu
[ 20.750043] NET: Registered protocol family 1
[ 20.750104] Using IPI No-Shortcut mode
[ 20.750168] registered taskstats version 1
[ 20.750321] Magic number: 4:435:599
[ 20.750331] hash matches device serial8250
[ 20.750410] hash matches device ptyd3
[ 20.750517] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 20.750521] EDD information not available.
[ 20.751457] Freeing unused kernel memory: 364k freed
[ 20.785498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/
serio0/input/input1
[ 22.263172] fuse init (API version 7.9)
[ 22.298753] ACPI: Fan [FAN] (on)
[ 22.312261] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 22.312275] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 22.315781] ACPI: Thermal Zone [THRM] (54 C)
[ 23.499372] usbcore: registered new interface driver usbfs
[ 23.499420] usbcore: registered new interface driver hub
[ 23.546001] usbcore: registered new device driver usb
[ 23.556843] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker
[ 23.557248] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11
[ 23.557255] PCI: setting IRQ 11 as level-triggered
[ 23.557260] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNK0] -> GSI 11
(level, low) -> IRQ 11
[ 23.558014] eth0: IC Plus Corporation IP100A FAST Ethernet Adapter at
0001c000, 00:00:00:00:00:00, IRQ 11.
[ 23.558557] eth0: MII PHY found at address 0, status 0x786d advertising
01e1.
[ 23.908360] SCSI subsystem initialized
[ 23.921639] USB Universal Host Controller Interface driver v3.0
[ 23.922130] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 23.922137] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[ 23.922158] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 23.922166] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 23.922838] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus
number 1
[ 23.922889] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
[ 23.923187] usb usb1: configuration #1 chosen from 1 choice
[ 23.923231] hub 1-0:1.0: USB hub found
[ 23.923243] hub 1-0:1.0: 2 ports detected
[ 24.008970] libata version 3.00 loaded.
[ 24.024546] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
[ 24.024555] PCI: setting IRQ 9 as level-triggered
[ 24.024560] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 9
(level, low) -> IRQ 9
[ 24.024579] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 24.024586] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 24.024652] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus
number 2
[ 24.024688] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000d400
[ 24.024903] usb usb2: configuration #1 chosen from 1 choice
[ 24.024965] hub 2-0:1.0: USB hub found
[ 24.024976] hub 2-0:1.0: 2 ports detected
[ 24.128090] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNK1] -> GSI 9
(level, low) -> IRQ 9
[ 24.128115] uhci_hcd 0000:02:0b.0: UHCI Host Controller
[ 24.128165] uhci_hcd 0000:02:0b.0: new USB bus registered, assigned bus
number 3
[ 24.128203] uhci_hcd 0000:02:0b.0: irq 9, io base 0x0000c400
[ 24.128439] usb usb3: configuration #1 chosen from 1 choice
[ 24.128485] hub 3-0:1.0: USB hub found
[ 24.128497] hub 3-0:1.0: 2 ports detected
[ 24.135958] Floppy drive(s): fd0 is 1.44M
[ 24.155699] FDC 0 is a post-1991 82077
[ 24.232244] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 24.232254] ACPI: PCI Interrupt 0000:02:0b.1[B] -> Link [LNKE] -> GSI 11
(level, low) -> IRQ 11
[ 24.232275] uhci_hcd 0000:02:0b.1: UHCI Host Controller
[ 24.232343] uhci_hcd 0000:02:0b.1: new USB bus registered, assigned bus
number 4
[ 24.232381] uhci_hcd 0000:02:0b.1: irq 11, io base 0x0000c800
[ 24.232619] usb usb4: configuration #1 chosen from 1 choice
[ 24.232680] hub 4-0:1.0: USB hub found
[ 24.232691] hub 4-0:1.0: 2 ports detected
[ 24.336315] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 24.336325] ACPI: PCI Interrupt 0000:02:0b.2[C] -> Link [LNKF] -> GSI 11
(level, low) -> IRQ 11
[ 24.336353] ehci_hcd 0000:02:0b.2: EHCI Host Controller
[ 24.336442] ehci_hcd 0000:02:0b.2: new USB bus registered, assigned bus
number 5
[ 24.336512] ehci_hcd 0000:02:0b.2: irq 11, io mem 0xe9001000
[ 24.347493] ehci_hcd 0000:02:0b.2: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 24.347770] usb usb5: configuration #1 chosen from 1 choice
[ 24.347820] hub 5-0:1.0: USB hub found
[ 24.347833] hub 5-0:1.0: 4 ports detected
[ 24.452235] ata_piix 0000:00:1f.1: version 2.12
[ 24.452379] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 24.454947] scsi0 : ata_piix
[ 24.457096] scsi1 : ata_piix
[ 24.458202] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
irq 14
[ 24.458207] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008
irq 15
[ 24.619792] ata1.01: ATA-5: MAXTOR 4K040H2, A08.1500, max UDMA/100
[ 24.619799] ata1.01: 78198750 sectors, multi 16: LBA
[ 24.636040] ata1.01: configured for UDMA/100
[ 25.110615] ata2.00: ATAPI: LITE-ON LTR-48125S, 1S05, max UDMA/33
[ 25.110656] ata2.01: ATAPI: IDE DVD-ROM 16X, V1.06, max UDMA/33
[ 25.282255] ata2.00: configured for UDMA/33
[ 25.293981] usb 5-4: new high speed USB device using ehci_hcd and
address 3
[ 25.430577] usb 5-4: configuration #1 chosen from 1 choice
[ 25.446202] ata2.01: configured for UDMA/33
[ 25.446486] scsi 0:0:1:0: Direct-Access ATA MAXTOR 4K040H2 A08.
PQ: 0 ANSI: 5
[ 25.451497] scsi 1:0:0:0: CD-ROM LITE-ON LTR-48125S 1S05
PQ: 0 ANSI: 5
[ 25.452094] scsi 1:0:1:0: CD-ROM IDE DVD-ROM 16X 1.06 PQ:
0 ANSI: 5
[ 25.669352] usb 3-1: new low speed USB device using uhci_hcd and address
2[
25.751257] Driver 'sd' needs updating - please use bus_type methods
[ 25.751446] sd 0:0:1:0: [sda] 78198750 512-byte hardware sectors (40038
MB)
[ 25.751472] sd 0:0:1:0: [sda] Write Protect is off
[ 25.751477] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 25.751514] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 25.751619] sd 0:0:1:0: [sda] 78198750 512-byte hardware sectors (40038
MB)
[ 25.751638] sd 0:0:1:0: [sda] Write Protect is off
[ 25.751643] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 25.751677] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 25.751685] sda:<4>Driver 'sr' needs updating - please use bus_type
methods
[ 25.776289] sda1 sda2 sda3 < sda5 sda6 >
[ 25.837778] usb 3-1: configuration #1 chosen from 1 choice
[ 25.843056] usbcore: registered new interface driver libusual
[ 25.855829] sd 0:0:1:0: [sda] Attached SCSI disk
[ 25.858508] Initializing USB Mass Storage driver...
[ 25.872369] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 25.872408] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 25.872440] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 25.894721] scsi2 : SCSI emulation for USB Mass Storage devices
[ 25.898773] usbcore: registered new interface driver usb-storage
[ 25.898784] USB Mass Storage support registered.
[ 25.899061] usb-storage: device found at 3
[ 25.899065] usb-storage: waiting for device to settle before scanning
[ 25.935623] sr0: scsi3-mmc drive: 200x/48x writer cd/rw xa/form2 cdda tray
[ 25.935633] Uniform CD-ROM driver Revision: 3.20
[ 25.935755] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 25.936170] usbcore: registered new interface driver hiddev
[ 25.939689] sr1: scsi3-mmc drive: 44x/44x cd/rw xa/form2 cdda tray
[ 25.939817] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 25.951313] input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1e.0/0000:02:0b.0/usb3/3-1/3-1:1.0/input/input2
[ 25.957106] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on
usb-0000:02:0b.0-1
[ 25.957147] usbcore: registered new interface driver usbhid
[ 25.957154] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 26.654747] Attempting manual resume
[ 26.654756] swsusp: Resume From Partition 8:6
[ 26.654759] PM: Checking swsusp image.
[ 26.655221] PM: Resume from disk failed.
[ 26.737518] kjournald starting. Commit interval 5 seconds
[ 26.737553] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.888916] usb-storage: device scan complete
[ 30.889618] scsi 2:0:0:0: Direct-Access Memorex TD Classic 003B PMAP
PQ: 0 ANSI: 0 CCS
[ 30.891199] sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
[ 30.891824] sd 2:0:0:0: [sdb] Write Protect is off
[ 30.891830] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 30.891836] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 30.894533] sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
[ 30.895192] sd 2:0:0:0: [sdb] Write Protect is off
[ 30.895196] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 30.895199] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 30.895210] sdb: sdb1
[ 30.896747] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 30.896823] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 37.960324] Linux agpgart interface v0.102
[ 38.037182] agpgart: Detected an Intel 845G Chipset.
[ 38.041338] agpgart: AGP aperture is 64M @ 0xe0000000
[ 38.168858] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.240892] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.360658] intel_rng: FWH not detected
[ 38.608034] iTCO_vendor_support: vendor-support=0
[ 38.663928] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-
Jul-2007)
[ 38.664231] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by
hardware
[ 38.664246] iTCO_wdt: No card detected
[ 38.896554] input: Power Button (FF) as /devices/virtual/input/input3
[ 38.911434] ACPI: Power Button (FF) [PWRF]
[ 38.911703] input: Power Button (CM) as /devices/virtual/input/input4
[ 38.923438] ACPI: Power Button (CM) [PWRB]
[ 38.923718] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 38.943389] ACPI: Sleep Button (CM) [SLPB]
[ 39.863766] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 42.208867] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 42.208878] PCI: setting IRQ 5 as level-triggered
[ 42.208884] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5
(level, low) -> IRQ 5
[ 42.208923] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 42.801020] intel8x0_measure_ac97_clock: measured 55348 usecs
[ 42.801028] intel8x0: clocking to 48000
[ 43.469455] parport_pc 00:0a: reported by Plug and Play ACPI
[ 43.469534] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 48.228678] lp0: using parport0 (interrupt-driven).
[ 48.457254] Adding 369452k swap on /dev/sda6. Priority:-1 extents:1
across:369452k
[ 49.129244] EXT3 FS on sda5, internal journal
[ 51.221795] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 52.271040] No dock devices found.
[ 55.016509] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 55.016521] apm: overridden by ACPI.
[ 55.295582] ppdev: user-space parallel port driver
[ 55.671127] audit(1342557338.625:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=4902 profile="/usr/sbin/cupsd" namespace="default"
[ 58.780114] Bluetooth: Core ver 2.11
[ 58.782135] NET: Registered protocol family 31
[ 58.782145] Bluetooth: HCI device and connection manager initialized
[ 58.782153] Bluetooth: HCI socket layer initialized
[ 58.839522] Bluetooth: L2CAP ver 2.9
[ 58.839531] Bluetooth: L2CAP socket layer initialized
[ 58.982176] Bluetooth: RFCOMM socket layer initialized
[ 58.982221] Bluetooth: RFCOMM TTY layer initialized
[ 58.982224] Bluetooth: RFCOMM ver 1.8
[ 87.792336] NET: Registered protocol family 10
[ 87.793992] lo: Disabled Privacy Extensions
[ 169.865380] NET: Registered protocol family 17από Learner » 18 Ιούλ 2012, 09:48
KostasA έγραψε:Τελικά έβαλα τα 8.04 και τρέχουν μια χαρά.
Αν το πρόβλημα σου επιλύθηκε , τότε πάτα το πράσινο τικ 
, στην δημοσίευση που έλυσε το πρόβλημα. Την δική σου μάλλον , έτσι ώστε να φαίνεται το θέμα ως επιλυμένο.
από KostasA » 18 Ιούλ 2012, 15:38
από KostasA » 03 Αύγ 2012, 23:33
Επιστροφή στο Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet