ΣΕ HP ΔΕΝ ΕΝΤΟΠΙΖΕΙ ΑΣΥΡΜΑΤO ΜΕΤΑ ΑΠΟ UPDATE

[Learner]

Έχεις δοκιμάσει να μπεις από προηγούμενο πυρήνα ; Από το μενού του grub επιλέγεις "Previous Linux Versions" και τσεκάρεις αν λειτουργεί από προηγούμενο πυρήνα.

[Delis]

Το δοκίμασα και αυτό.. τζίφος..

[Delis]

Καλησπέρα παιδια,υπαρχει καμια λυση για την περιπτωση μου;το πηγα και σε τεχνικο αλλα παλι τπτ..να εγκαταλειψω κ να δω για αλλα software?

[the_eye]

Δοκίμασε με ένα Livecd με 12.04 σου κάνει το ίδιο ;
Δώσε μας το αποτέλεσμα της εντολής dmesg στο τεερματικό.

[Delis]

Κώδικας: Επιλογή όλων

1.892721] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[ 1.892740] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff880062c57b90), AE_ALREADY_EXISTS (20110623/psparse-536)
[ 1.892762] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20110623/ac-118)
[ 1.895982] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[ 1.916500] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.936470] r8169 0000:03:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.936523] r8169 0000:03:00.0: setting latency timer to 64
[ 1.936611] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[ 1.937445] r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000352000, 38:ea:a7:fa:48:28, XID 0c900800 IRQ 41
[ 1.937451] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.591604] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 13.648614] Adding 1679356k swap on /dev/sda3. Priority:-1 extents:1 across:1679356k
[ 13.658827] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.716703] udevd[405]: starting version 175
[ 14.084897] type=1400 audit(1384621349.403:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=551 comm="apparmor_parser"
[ 14.085584] type=1400 audit(1384621349.403:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=551 comm="apparmor_parser"
[ 14.085957] type=1400 audit(1384621349.403:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=551 comm="apparmor_parser"
[ 14.132117] device-mapper: multipath: version 1.3.1 loaded
[ 14.160411] lp: driver loaded but no devices found
[ 14.242223] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMB0 [io 0xb00-0xb0f]
[ 14.242230] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.366224] wmi: Mapper loaded
[ 14.464041] acpi device:00: registered as cooling_device2
[ 14.464302] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 14.464450] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 14.527738] Linux video capture interface: v2.00
[ 14.579430] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b34f)
[ 14.592986] input: HP Truevision HD as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input5
[ 14.593288] usbcore: registered new interface driver uvcvideo
[ 14.593292] USB Video Class driver (1.1.1)
[ 14.633287] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 14.638221] Initializing Realtek PCIE storage driver...
[ 14.638262] --- Nov 9 2013, 11:13:10 ---
[ 14.638356] rts5229 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 14.639049] Resource length: 0x1000
[ 14.639081] Original address: 0x90200000, remapped address: 0xffffc90000336000
[ 14.639089] pci->irq = 20
[ 14.639093] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
[ 14.639199] rts5229 0000:02:00.0: setting latency timer to 64
[ 14.648587] scsi2 : SCSI emulation for RTS5229
[ 14.649038] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 14.649057] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff880062c57f50), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 14.649083] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880062c58820), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 14.650417] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 14.650432] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff880062c57f50), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 14.650451] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880062c58820), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 14.652327] rts5229: waiting for device to settle before scanning
[ 15.175290] Bluetooth: Core ver 2.16
[ 15.175416] NET: Registered protocol family 31
[ 15.175421] Bluetooth: HCI device and connection manager initialized
[ 15.175426] Bluetooth: HCI socket layer initialized
[ 15.175430] Bluetooth: L2CAP socket layer initialized
[ 15.175847] Bluetooth: SCO socket layer initialized
[ 15.198293] RTBT_Tb:vendor=0x1814, device=0x3298
[ 15.198301] RTBT_Tb:vendor=0x0, device=0x0
[ 15.198306] DynamicAlloc pci_device_id table at 0xffff880036ff4ec0 with size 64
[ 15.198310] RTBT_Tb:vendor=0x1814, device=0x3298
[ 15.198313] Convert: vendor=0x1814, device=0x3298
[ 15.198315] RTBT_Tb:vendor=0x0, device=0x0
[ 15.198318] pci_device_id: vendor=0x1814, device=0x3298
[ 15.198363] ===> rtbt_pci_probe():probe for device(Vendor=0x1814, Device=0xffff880061a7e03e)
[ 15.198470] rtbt 0000:04:00.1: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 15.198514] rtbt_pci_probe():PCI Dev(0000:04:00.1) get resource at 0x90100000,VA 0xffffc90000360000,IRQ 23.
[ 15.198566] rtbt 0000:04:00.1: setting latency timer to 64
[ 15.198571] call dev_ops->dev_ctrl_init!
[ 15.198600] call dev_ops->dev_resource_init!
[ 15.199557] RX_Base_PTR0(0x180)= 0x54035000
[ 15.199666] RX_Base_PTR1(0x190)= 0x280
[ 15.199768] reg_dump_txdesc():Dump TxDesc registers:
[ 15.199771] TX_RING_00:
[ 15.199773] BASE_PTR:(addr=0x0, val=0xffffffff)
[ 15.199776] MAX_CNT:(addr=0x4, val=0xffffffff)
[ 15.199779] MAX_CNT:(addr=0x8, val=0xffffffff)
[ 15.199781] TX_RING_01:
[ 15.199783] BASE_PTR:(addr=0x10, val=0xffffffff)
[ 15.199786] MAX_CNT:(addr=0x14, val=0xffffffff)
[ 15.199788] MAX_CNT:(addr=0x18, val=0xffffffff)
[ 15.199790] TX_RING_02:
[ 15.199793] BASE_PTR:(addr=0x20, val=0xffffffff)
[ 15.199795] MAX_CNT:(addr=0x24, val=0xffffffff)
[ 15.199797] MAX_CNT:(addr=0x28, val=0xffffffff)
[ 15.199800] TX_RING_03:
[ 15.199802] BASE_PTR:(addr=0x30, val=0xffffffff)
[ 15.199804] MAX_CNT:(addr=0x34, val=0xffffffff)
[ 15.199807] MAX_CNT:(addr=0x38, val=0xffffffff)
[ 15.199809] TX_RING_04:
[ 15.199811] BASE_PTR:(addr=0x40, val=0xffffffff)
[ 15.199813] MAX_CNT:(addr=0x44, val=0xffffffff)
[ 15.199816] MAX_CNT:(addr=0x48, val=0xffffffff)
[ 15.199818] TX_RING_05:
[ 15.199820] BASE_PTR:(addr=0x50, val=0xffffffff)
[ 15.199823] MAX_CNT:(addr=0x54, val=0xffffffff)
[ 15.199825] MAX_CNT:(addr=0x58, val=0xffffffff)
[ 15.199827] TX_RING_06:
[ 15.199829] BASE_PTR:(addr=0x60, val=0xffffffff)
[ 15.199832] MAX_CNT:(addr=0x64, val=0xffffffff)
[ 15.199834] MAX_CNT:(addr=0x68, val=0xffffffff)
[ 15.199837] TX_RING_07:
[ 15.199839] BASE_PTR:(addr=0x70, val=0xffffffff)
[ 15.199841] MAX_CNT:(addr=0x74, val=0xffffffff)
[ 15.199844] MAX_CNT:(addr=0x78, val=0xffffffff)
[ 15.199846] TX_RING_08:
[ 15.199848] BASE_PTR:(addr=0x80, val=0xffffffff)
[ 15.199850] MAX_CNT:(addr=0x84, val=0xffffffff)
[ 15.199853] MAX_CNT:(addr=0x88, val=0xffffffff)
[ 15.199855] TX_RING_09:
[ 15.199857] BASE_PTR:(addr=0x90, val=0xffffffff)
[ 15.199859] MAX_CNT:(addr=0x94, val=0xffffffff)
[ 15.199862] MAX_CNT:(addr=0x98, val=0xffffffff)
[ 15.199864] TX_RING_10:
[ 15.199866] BASE_PTR:(addr=0xa0, val=0xffffffff)
[ 15.199869] MAX_CNT:(addr=0xa4, val=0xffffffff)
[ 15.199871] MAX_CNT:(addr=0xa8, val=0xffffffff)
[ 15.199873] TX_RING_11:
[ 15.199876] BASE_PTR:(addr=0xb0, val=0xffffffff)
[ 15.199878] MAX_CNT:(addr=0xb4, val=0xffffffff)
[ 15.199880] MAX_CNT:(addr=0xb8, val=0xffffffff)
[ 15.199883] TX_RING_12:
[ 15.199885] BASE_PTR:(addr=0xc0, val=0xffffffff)
[ 15.199887] MAX_CNT:(addr=0xc4, val=0xffffffff)
[ 15.199890] MAX_CNT:(addr=0xc8, val=0xffffffff)
[ 15.199892] TX_RING_13:
[ 15.199894] BASE_PTR:(addr=0xd0, val=0xffffffff)
[ 15.199897] MAX_CNT:(addr=0xd4, val=0xffffffff)
[ 15.199899] MAX_CNT:(addr=0xd8, val=0xffffffff)
[ 15.199901] TX_RING_14:
[ 15.199903] BASE_PTR:(addr=0xe0, val=0xffffffff)
[ 15.199906] MAX_CNT:(addr=0xe4, val=0xffffffff)
[ 15.199908] MAX_CNT:(addr=0xe8, val=0xffffffff)
[ 15.199911] TX_RING_15:
[ 15.199913] BASE_PTR:(addr=0xf0, val=0xffffffff)
[ 15.199915] MAX_CNT:(addr=0xf4, val=0xffffffff)
[ 15.199918] MAX_CNT:(addr=0xf8, val=0xffffffff)
[ 15.199920] TX_RING_16:
[ 15.199922] BASE_PTR:(addr=0x100, val=0xffffffff)
[ 15.199925] MAX_CNT:(addr=0x104, val=0xffffffff)
[ 15.199927] MAX_CNT:(addr=0x108, val=0xffffffff)
[ 15.199929] TX_RING_17:
[ 15.199931] BASE_PTR:(addr=0x110, val=0xffffffff)
[ 15.199934] MAX_CNT:(addr=0x114, val=0xffffffff)
[ 15.199936] MAX_CNT:(addr=0x118, val=0xffffffff)
[ 15.199938] TX_RING_18:
[ 15.199941] BASE_PTR:(addr=0x120, val=0xffffffff)
[ 15.199943] MAX_CNT:(addr=0x124, val=0xffffffff)
[ 15.199945] MAX_CNT:(addr=0x128, val=0xffffffff)
[ 15.199948] TX_RING_19:
[ 15.199950] BASE_PTR:(addr=0x130, val=0xffffffff)
[ 15.199952] MAX_CNT:(addr=0x134, val=0xffffffff)
[ 15.199955] MAX_CNT:(addr=0x138, val=0xffffffff)
[ 15.199957] TX_RING_20:
[ 15.199959] BASE_PTR:(addr=0x140, val=0xffffffff)
[ 15.199962] MAX_CNT:(addr=0x144, val=0xffffffff)
[ 15.199964] MAX_CNT:(addr=0x148, val=0xffffffff)
[ 15.199966] TX_RING_21:
[ 15.199968] BASE_PTR:(addr=0x150, val=0xffffffff)
[ 15.199971] MAX_CNT:(addr=0x154, val=0xffffffff)
[ 15.199973] MAX_CNT:(addr=0x158, val=0xffffffff)
[ 15.199976] reg_dump_rxdesc():Dump RxDesc registers:
[ 15.199978] RX_RING_00:
[ 15.199980] BASE_PTR:(addr=0x180, val=0xffffffff)
[ 15.199983] MAX_CNT:(addr=0x184, val=0xffffffff)
[ 15.199986] MAX_CNT:(addr=0x188, val=0xffffffff)
[ 15.199988] RX_RING_01:
[ 15.199990] BASE_PTR:(addr=0x190, val=0xffffffff)
[ 15.199992] MAX_CNT:(addr=0x194, val=0xffffffff)
[ 15.199995] MAX_CNT:(addr=0x198, val=0xffffffff)
[ 15.200508] --->rtbt_hps_iface_init(): if_type=1
[ 15.200522] <--rtbt_hps_iface_init():alloc hdev(0xffff880060ee9000) done
[ 15.200525] <---rtbt_pci_probe():Sucess
[ 15.220524] --->rtbt_hps_iface_attach()
[ 15.221115] -->rtbt_hci_dev_destruct(): dev=0xffff880060ee9000!
[ 15.221123] <---rtbt_hps_iface_attach():Success
[ 15.221127] rtbt_hps_iface_attach ok
[ 15.221162] -->rtbt_hci_dev_open()
[ 15.221260] RtmpOSIRQRequest(): request_irq (IRQ=23)done, isr_handler=0xffffffffa023d0f0!
[ 15.222368] reg_dump_txdesc():Dump TxDesc registers:
[ 15.222371] TX_RING_00:
[ 15.222376] BASE_PTR:(addr=0x0, val=0x60f14000)
[ 15.222380] MAX_CNT:(addr=0x4, val=0x2)
[ 15.222383] MAX_CNT:(addr=0x8, val=0x0)
[ 15.222386] TX_RING_01:
[ 15.222389] BASE_PTR:(addr=0x10, val=0x20)
[ 15.222393] MAX_CNT:(addr=0x14, val=0x2)
[ 15.222397] MAX_CNT:(addr=0x18, val=0x0)
[ 15.222399] TX_RING_02:
[ 15.222402] BASE_PTR:(addr=0x20, val=0x40)
[ 15.222406] MAX_CNT:(addr=0x24, val=0x4)
[ 15.222410] MAX_CNT:(addr=0x28, val=0x0)
[ 15.222412] TX_RING_03:
[ 15.222415] BASE_PTR:(addr=0x30, val=0x80)
[ 15.222419] MAX_CNT:(addr=0x34, val=0x18)
[ 15.222423] MAX_CNT:(addr=0x38, val=0x0)
[ 15.222425] TX_RING_04:
[ 15.222428] BASE_PTR:(addr=0x40, val=0x200)
[ 15.222432] MAX_CNT:(addr=0x44, val=0x18)
[ 15.222436] MAX_CNT:(addr=0x48, val=0x0)
[ 15.222438] TX_RING_05:
[ 15.222441] BASE_PTR:(addr=0x50, val=0x380)
[ 15.222445] MAX_CNT:(addr=0x54, val=0x18)
[ 15.222449] MAX_CNT:(addr=0x58, val=0x0)
[ 15.222451] TX_RING_06:
[ 15.222454] BASE_PTR:(addr=0x60, val=0x500)
[ 15.222458] MAX_CNT:(addr=0x64, val=0x18)
[ 15.222462] MAX_CNT:(addr=0x68, val=0x0)
[ 15.222464] TX_RING_07:
[ 15.222467] BASE_PTR:(addr=0x70, val=0x680)
[ 15.222471] MAX_CNT:(addr=0x74, val=0x18)
[ 15.222475] MAX_CNT:(addr=0x78, val=0x0)
[ 15.222477] TX_RING_08:
[ 15.222480] BASE_PTR:(addr=0x80, val=0x800)
[ 15.222484] MAX_CNT:(addr=0x84, val=0x18)
[ 15.222488] MAX_CNT:(addr=0x88, val=0x0)
[ 15.222490] TX_RING_09:
[ 15.222493] BASE_PTR:(addr=0x90, val=0x980)
[ 15.222497] MAX_CNT:(addr=0x94, val=0x18)
[ 15.222501] MAX_CNT:(addr=0x98, val=0x0)
[ 15.222503] TX_RING_10:
[ 15.222506] BASE_PTR:(addr=0xa0, val=0xb00)
[ 15.222510] MAX_CNT:(addr=0xa4, val=0x18)
[ 15.222514] MAX_CNT:(addr=0xa8, val=0x0)
[ 15.222516] TX_RING_11:
[ 15.222519] BASE_PTR:(addr=0xb0, val=0xc80)
[ 15.222523] MAX_CNT:(addr=0xb4, val=0x18)
[ 15.222527] MAX_CNT:(addr=0xb8, val=0x0)
[ 15.222529] TX_RING_12:
[ 15.222532] BASE_PTR:(addr=0xc0, val=0xe00)
[ 15.222536] MAX_CNT:(addr=0xc4, val=0x18)
[ 15.222540] MAX_CNT:(addr=0xc8, val=0x0)
[ 15.222542] TX_RING_13:
[ 15.222545] BASE_PTR:(addr=0xd0, val=0xf80)
[ 15.222549] MAX_CNT:(addr=0xd4, val=0x8)
[ 15.222553] MAX_CNT:(addr=0xd8, val=0x0)
[ 15.222555] TX_RING_14:
[ 15.222558] BASE_PTR:(addr=0xe0, val=0x1000)
[ 15.222562] MAX_CNT:(addr=0xe4, val=0x8)
[ 15.222565] MAX_CNT:(addr=0xe8, val=0x0)
[ 15.222568] TX_RING_15:
[ 15.222571] BASE_PTR:(addr=0xf0, val=0x1080)
[ 15.222575] MAX_CNT:(addr=0xf4, val=0x8)
[ 15.222578] MAX_CNT:(addr=0xf8, val=0x0)
[ 15.222581] TX_RING_16:
[ 15.222584] BASE_PTR:(addr=0x100, val=0x1100)
[ 15.222588] MAX_CNT:(addr=0x104, val=0x8)
[ 15.222592] MAX_CNT:(addr=0x108, val=0x0)
[ 15.222594] TX_RING_17:
[ 15.222597] BASE_PTR:(addr=0x110, val=0x1180)
[ 15.222601] MAX_CNT:(addr=0x114, val=0x8)
[ 15.222605] MAX_CNT:(addr=0x118, val=0x0)
[ 15.222607] TX_RING_18:
[ 15.222610] BASE_PTR:(addr=0x120, val=0x1200)
[ 15.222614] MAX_CNT:(addr=0x124, val=0x8)
[ 15.222617] MAX_CNT:(addr=0x128, val=0x0)
[ 15.222620] TX_RING_19:
[ 15.222623] BASE_PTR:(addr=0x130, val=0x1280)
[ 15.222627] MAX_CNT:(addr=0x134, val=0x8)
[ 15.222630] MAX_CNT:(addr=0x138, val=0x0)
[ 15.222633] TX_RING_20:
[ 15.222636] BASE_PTR:(addr=0x140, val=0x1300)
[ 15.222640] MAX_CNT:(addr=0x144, val=0x18)
[ 15.222643] MAX_CNT:(addr=0x148, val=0x0)
[ 15.222646] TX_RING_21:
[ 15.222649] BASE_PTR:(addr=0x150, val=0x1480)
[ 15.222653] MAX_CNT:(addr=0x154, val=0x18)
[ 15.222656] MAX_CNT:(addr=0x158, val=0x0)
[ 15.222659] reg_dump_rxdesc():Dump RxDesc registers:
[ 15.222661] RX_RING_00:
[ 15.222665] BASE_PTR:(addr=0x180, val=0x54035000)
[ 15.222669] MAX_CNT:(addr=0x184, val=0x28)
[ 15.222672] MAX_CNT:(addr=0x188, val=0x27)
[ 15.222675] RX_RING_01:
[ 15.222678] BASE_PTR:(addr=0x190, val=0x280)
[ 15.222682] MAX_CNT:(addr=0x194, val=0x28)
[ 15.222686] MAX_CNT:(addr=0x198, val=0x27)
[ 15.222711] <--rtbt_hci_dev_open(), status=0
[ 15.260470] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 15.260479] Disabling lock debugging due to kernel taint
[ 15.412965] [fglrx] Maximum main memory to use for locked dma buffers: 1494 MBytes.
[ 15.413123] [fglrx] vendor: 1002 device: 9808 count: 1
[ 15.413726] [fglrx] ioport: bar 1, base 0x3000, size: 0x100
[ 15.413751] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.413759] pci 0000:00:01.0: setting latency timer to 64
[ 15.414262] [fglrx] Kernel PAT support is enabled
[ 15.414303] [fglrx] module loaded - fglrx 9.0.2 [Oct 3 2012] with 1 minors
[ 15.639146] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 15.652512] rts5229: device scan complete
[ 15.652715] scsi 2:0:0:0: Direct-Access Generic- SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 15.652777] Bad LUN (0:1)
[ 15.652863] Bad target number (1:0)
[ 15.652932] Bad target number (2:0)
[ 15.652998] Bad target number (3:0)
[ 15.653064] Bad target number (4:0)
[ 15.653128] Bad target number (5:0)
[ 15.653191] Bad target number (6:0)
[ 15.653255] Bad target number (7:0)
[ 15.653693] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 15.653909] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 15.865361] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.865459] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 15.865498] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 15.909291] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400
[ 15.954845] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 15.985907] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 15.986652] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.056431] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 16.056740] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 16.186462] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 16.186479] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff880062c57f50), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.186500] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880062c58820), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.201306] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 16.201321] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff880062c57f50), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.201344] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880062c58820), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 16.257257] init: failsafe main process (895) killed by TERM signal
[ 16.287583] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[ 16.287591] vesafb: scrolling: redraw
[ 16.287596] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 16.289494] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004a00000, using 4224k, total 4224k
[ 16.289831] Console: switching to colour frame buffer device 170x48
[ 16.289887] fb0: VESA VGA frame buffer device
[ 16.499378] ppdev: user-space parallel port driver
[ 16.538271] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.538280] Bluetooth: BNEP filters: protocol multicast
[ 16.579095] type=1400 audit(1384621351.895:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=998 comm="apparmor_parser"
[ 16.585217] type=1400 audit(1384621351.903:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=998 comm="apparmor_parser"
[ 16.591968] RTBTH_IOCDMAC: dmac.dmac_op=0
[ 16.592082] reg_dump_txdesc():Dump TxDesc registers:
[ 16.592086] TX_RING_00:
[ 16.592102] BASE_PTR:(addr=0x0, val=0x60f14000)
[ 16.592107] MAX_CNT:(addr=0x4, val=0x2)
[ 16.592111] MAX_CNT:(addr=0x8, val=0x0)
[ 16.592113] TX_RING_01:
[ 16.592117] BASE_PTR:(addr=0x10, val=0x20)
[ 16.592120] MAX_CNT:(addr=0x14, val=0x2)
[ 16.592124] MAX_CNT:(addr=0x18, val=0x0)
[ 16.592126] TX_RING_02:
[ 16.592130] BASE_PTR:(addr=0x20, val=0x40)
[ 16.592134] MAX_CNT:(addr=0x24, val=0x4)
[ 16.592137] MAX_CNT:(addr=0x28, val=0x0)
[ 16.592139] TX_RING_03:
[ 16.592143] BASE_PTR:(addr=0x30, val=0x80)
[ 16.592147] MAX_CNT:(addr=0x34, val=0x18)
[ 16.592150] MAX_CNT:(addr=0x38, val=0x0)
[ 16.592152] TX_RING_04:
[ 16.592156] BASE_PTR:(addr=0x40, val=0x200)
[ 16.592160] MAX_CNT:(addr=0x44, val=0x18)
[ 16.592163] MAX_CNT:(addr=0x48, val=0x0)
[ 16.592165] TX_RING_05:
[ 16.592169] BASE_PTR:(addr=0x50, val=0x380)
[ 16.592173] MAX_CNT:(addr=0x54, val=0x18)
[ 16.592176] MAX_CNT:(addr=0x58, val=0x0)
[ 16.592178] TX_RING_06:
[ 16.592182] BASE_PTR:(addr=0x60, val=0x500)
[ 16.592185] MAX_CNT:(addr=0x64, val=0x18)
[ 16.592189] MAX_CNT:(addr=0x68, val=0x0)
[ 16.592191] TX_RING_07:
[ 16.592195] BASE_PTR:(addr=0x70, val=0x680)
[ 16.592199] MAX_CNT:(addr=0x74, val=0x18)
[ 16.592202] MAX_CNT:(addr=0x78, val=0x0)
[ 16.592204] TX_RING_08:
[ 16.592208] BASE_PTR:(addr=0x80, val=0x800)
[ 16.592211] MAX_CNT:(addr=0x84, val=0x18)
[ 16.592215] MAX_CNT:(addr=0x88, val=0x0)
[ 16.592217] TX_RING_09:
[ 16.592221] BASE_PTR:(addr=0x90, val=0x980)
[ 16.592224] MAX_CNT:(addr=0x94, val=0x18)
[ 16.592228] MAX_CNT:(addr=0x98, val=0x0)
[ 16.592230] TX_RING_10:
[ 16.592233] BASE_PTR:(addr=0xa0, val=0xb00)
[ 16.592237] MAX_CNT:(addr=0xa4, val=0x18)
[ 16.592241] MAX_CNT:(addr=0xa8, val=0x0)
[ 16.592243] TX_RING_11:
[ 16.592247] BASE_PTR:(addr=0xb0, val=0xc80)
[ 16.592250] MAX_CNT:(addr=0xb4, val=0x18)
[ 16.592254] MAX_CNT:(addr=0xb8, val=0x0)
[ 16.592256] TX_RING_12:
[ 16.592259] BASE_PTR:(addr=0xc0, val=0xe00)
[ 16.592263] MAX_CNT:(addr=0xc4, val=0x18)
[ 16.592267] MAX_CNT:(addr=0xc8, val=0x0)
[ 16.592269] TX_RING_13:
[ 16.592272] BASE_PTR:(addr=0xd0, val=0xf80)
[ 16.592276] MAX_CNT:(addr=0xd4, val=0x8)
[ 16.592280] MAX_CNT:(addr=0xd8, val=0x0)
[ 16.592282] TX_RING_14:
[ 16.592285] BASE_PTR:(addr=0xe0, val=0x1000)
[ 16.592289] MAX_CNT:(addr=0xe4, val=0x8)
[ 16.592293] MAX_CNT:(addr=0xe8, val=0x0)
[ 16.592295] TX_RING_15:
[ 16.592298] BASE_PTR:(addr=0xf0, val=0x1080)
[ 16.592302] MAX_CNT:(addr=0xf4, val=0x8)
[ 16.592306] MAX_CNT:(addr=0xf8, val=0x0)
[ 16.592308] TX_RING_16:
[ 16.592311] BASE_PTR:(addr=0x100, val=0x1100)
[ 16.592315] MAX_CNT:(addr=0x104, val=0x8)
[ 16.592319] MAX_CNT:(addr=0x108, val=0x0)
[ 16.592321] TX_RING_17:
[ 16.592324] BASE_PTR:(addr=0x110, val=0x1180)
[ 16.592328] MAX_CNT:(addr=0x114, val=0x8)
[ 16.592332] MAX_CNT:(addr=0x118, val=0x0)
[ 16.592334] TX_RING_18:
[ 16.592337] BASE_PTR:(addr=0x120, val=0x1200)
[ 16.592341] MAX_CNT:(addr=0x124, val=0x8)
[ 16.592345] MAX_CNT:(addr=0x128, val=0x0)
[ 16.592347] TX_RING_19:
[ 16.592350] BASE_PTR:(addr=0x130, val=0x1280)
[ 16.592354] MAX_CNT:(addr=0x134, val=0x8)
[ 16.592357] MAX_CNT:(addr=0x138, val=0x0)
[ 16.592360] TX_RING_20:
[ 16.592363] BASE_PTR:(addr=0x140, val=0x1300)
[ 16.592367] MAX_CNT:(addr=0x144, val=0x18)
[ 16.592370] MAX_CNT:(addr=0x148, val=0x0)
[ 16.592372] TX_RING_21:
[ 16.592376] BASE_PTR:(addr=0x150, val=0x1480)
[ 16.592380] MAX_CNT:(addr=0x154, val=0x18)
[ 16.592383] MAX_CNT:(addr=0x158, val=0x0)
[ 16.592386] reg_dump_rxdesc():Dump RxDesc registers:
[ 16.592388] RX_RING_00:
[ 16.592392] BASE_PTR:(addr=0x180, val=0x54035000)
[ 16.592396] MAX_CNT:(addr=0x184, val=0x28)
[ 16.592400] MAX_CNT:(addr=0x188, val=0x27)
[ 16.592402] RX_RING_01:
[ 16.592405] BASE_PTR:(addr=0x190, val=0x280)
[ 16.592409] MAX_CNT:(addr=0x194, val=0x28)
[ 16.592413] MAX_CNT:(addr=0x198, val=0x27)
[ 16.604416] RTBTH_IOCDMAC: dmac.dmac_op=1
[ 16.712993] Bluetooth: RFCOMM TTY layer initialized
[ 16.713005] Bluetooth: RFCOMM socket layer initialized
[ 16.713008] Bluetooth: RFCOMM ver 1.11
[ 16.874903] type=1400 audit(1384621352.191:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1038 comm="apparmor_parser"
[ 16.880094] type=1400 audit(1384621352.199:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1038 comm="apparmor_parser"
[ 16.880478] type=1400 audit(1384621352.199:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1038 comm="apparmor_parser"
[ 16.882605] type=1400 audit(1384621352.199:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1037 comm="apparmor_parser"
[ 16.883131] type=1400 audit(1384621352.199:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1037 comm="apparmor_parser"
[ 16.925077] r8169 0000:03:00.0: eth0: link down
[ 16.925093] r8169 0000:03:00.0: eth0: link down
[ 16.925562] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.926213] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.439237] init: anacron main process (1137) killed by TERM signal
[ 18.452192] r8169 0000:03:00.0: eth0: link up
[ 18.452610] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.591674] fglrx_pci 0000:00:01.0: irq 43 for MSI/MSI-X
[ 18.592745] [fglrx] Firegl kernel thread PID: 1316
[ 18.593152] [fglrx] Firegl kernel thread PID: 1317
[ 18.593561] [fglrx] Firegl kernel thread PID: 1318
[ 18.593724] [fglrx] IRQ 43 Enabled
[ 18.595508] [fglrx] Gart USWC size:500 M.
[ 18.595512] [fglrx] Gart cacheable size:196 M.
[ 18.595521] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 18.595526] [fglrx] Reserved FB block: Unshared offset:fe6c000, size:194000
[ 18.595531] [fglrx] Reserved FB block: Unshared offset:17fee000, size:12000
[ 18.619266] [fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed!
[ 18.619278] [fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000023, ulEventData = 00000001
[ 18.650482] [fglrx] ATIF platform detected with notification ID: 0xd0
[ 28.640237] eth0: no IPv6 routers present
john@john-HP-655-Notebook-PC:~$


Τα αποτελέσματα από εντολές τερματικού τα βάζουμε μέσα σε [cοde]αποτελέσματα[/cοde]. Επιλέγουμε το κείμενο και πατάμε το κουμπάκι . Δες εδώ πως.

[Delis]

Τι ακριβώς έκανα λάθος eliaspc στην επικόλληση των εντολών από το τερματικό δεν έχω καταλάβει, έχω καταλάβει όμως ότι ήταν κάτι πάρα πολύ σοβαρό και κάνει αδύνατη την παροχή οποιασδήποτε βοήθειας ή απάντησης από το forum σας. WINDOWS και πάλι WINDOWS λοιπόν!!!
Να είστε καλά για τη συνεργασία!!

[eliasps]

Κάθε κάρτα δικτύου (ή οποιαδήποτε συσκευή) διαφέρει από μία άλλη.
Πρακτικά αυτό σημαίνει πως τα προγράμματα που διαχειρίζονται τις κάρτες (οι οδηγοί τους) είναι ειδικά γραμμένοι για τις συγκεκριμένες κάρτες.
Τι σημαίνει όμως αυτό, αυτό σημαίνει πως για να δοκιμάσει κάποιος έναν οδηγό για μία κάρτα ώστε να δει αν δουλεύει, πρέπει να έχει την εν λόγω κάρτα.

Αν εγώ θέλω να σε βοηθήσω εσένα ώστε να διαπιστώσω τι πάει στραβά με την κάρτα σου, πρέπει να έχω την ίδια κάρτα. Κάτι που δεν ισχύει.
Από τη στιγμή που δεν ισχύει αυτό, η μόνη επιλογή που έχω αν θέλω να σε βοηθήσω είναι να κάνω αναζήτηση στη Google και να στηριχτώ σε απαντήσεις άλλων που έχουν την ίδια κάρτα.
Κάτι τέτοιο ίσως ακούγεται εύκολο, αλλά δεν είναι.
Έψαξα αρκετά στη Google για να βρω λύση για το πρόβλημά σου.
Βρήκα σειρά από εντολές εκ των οποίων μερικές δεν ήξερα τι κάνουν, οπότε έπρεπε να τις δοκιμάσω στον υπολογιστή μου για να το διαπιστώσω, ή να κάνω ακόμα μερικές αναζητήσεις για να δω τι κάνουν.
Αυτό μόνο και μόνο για να μην πω καμιά βλακεία χωρίς πρώτα να την έχω εξετάσει και σου χαλάσω τον υπολογιστή.

Η αναζήτηση στη Google με κάνει να πιστεύω πως η κάρτα σου υποστηρίζεται κανονικά από τον πυρήνα του Ubuntu, ωστόσο δεν λειτουργεί το Internet.
Βρήκα στα αποτελέσματα μία διαδικασία της οποίας τους συνδέσμους παρέθεσα σε αυτή την απάντηση, τονίζοντας πως πρέπει να περιμένεις περισσότερες απαντήσεις διότι πρέπει να αφήσουμε αυτή τη διαδικασία ως τελευταία λύση λόγω της φύσης της.
Αν τελικά δεν έβγαινε άκρη, σου είπα πως θα σε καθοδηγούσα εγώ με τα βήματα της διαδικασίας. Παρόλα αυτά εσύ ξεκίνησες μόνος σου.

Σου είπα στη συνέχεια πως χρειάζεται υπομονή και ανέφερες πως δεν κατάφερες κάτι και πως το βράδυ θα είχες νεότερα. Παρόλα αυτά δεν ανέφερες νεότερα.
Ο the_eye σε ρώτησε αν λειτουργεί το internet από Live της 12.04. Δεν απάντησες, ενώ αν το γνωρίζαμε αυτό θα μας έδειχνε κάποια στοιχεία.

Πρέπει να έχεις στο μυαλό σου επίσης πως δεν πληρώνει κάποιος κανέναν από εμάς για να παρέχουμε υποστήριξη σε χρήστες. Ο καθένας το κάνει για τους δικούς του λόγους, εθελοντικά και στον ελεύθερο χρόνο του.
Επίσης το ότι είμαστε γραμμένοι στο forum και προσπαθούμε να παρέχουμε υποστήριξη, δεν μας κάνει και παντογνώστες ούτε experts στους υπολογιστές (μιλάω για τον εαυτό μου). Η πλειοψηφία των μελών δεν ασχολείται επαγγελματικά με την πληροφορική.
Οπότε το ότι δεν σε βοήθησα εγώ ή κάποιος άλλος (πράγμα που δεν ισχύει) μπορεί απλά να σημαίνει πως δεν γνωρίζω πως να σε βοηθήσω.
Ανέφερες πως το πήγες σε τεχνικό, πράγμα που σημαίνει πως το είδε επαγγελματίας και δεν έγινε κάτι, ενώ παρόλα αυτά περιμένεις από εμένα αποτελέσματα.

Όταν σου είπα να περιμένεις για περισσότερες απαντήσεις, στο ενδιάμεσο κατέβασα το αρχείο από το dropbox που αναφέρει ο οδηγός στους συνδέσμους για να διαβάσω τι έχει μέσα. Το dropbox δεν είναι αξιόπιστη πηγή για λήψη λογισμικού οπότε δεν μπορώ να σου προτείνω ελαφρά τη καρδία να κατεβάσεις και να εγκαταστήσεις το περιεχόμενο, χωρίς να γνωρίζω αν το έχει τροποποιήσει κάποιος ή αν περιέχει κακόβουλο λογισμικό μέσα.

Όλα αυτά δεν στα αναφέρω για να σου πω πως ταλαιπωρήθηκα. Άμα ήταν ταλαιπωρία δεν θα το έκανα στο κάτω κάτω. Είναι το χόμπι μου.
Κανείς δεν με αναγκάζει να το κάνω.
Στα αναφέρω για να γίνει κατανοητή η διαδικασία υποστήριξης ενός μέλους και πως δεν είναι πάντα απλή και "ακίνδυνη".
Ελπίζω να μπεις στην διαδικασία να την κάνεις και εσύ, ώστε να το διαπιστώσεις εκ πείρας.
Πάντα υπάρχει ανάγκη για ενεργά μέλη στο forum.

Αν θεωρείς πως έκανα κάτι λάθος, αποτέλεσμα του οποίου είναι η παραπάνω δημοσίευσή σου, ευχαρίστως να το ακούσω και να απολογηθώ.

Αν λοιπόν αλλάξεις γνώμη για το «WINDOWS και πάλι WINDOWS», πες το εδώ ώστε να προχωρήσουμε με τη διαδικασία της μεταγλώττισης του οδηγού, γράψε εδώ για να ξεκινήσουμε.

[madvinegar]

Γιατι να μην δοκιμασει και με ndiswrapper ως τελευταια λυση? Λογικά θα δουλεψει (εφοσον εχει τους windows drivers).

viewtopic.php?f=9&t=26107&http

[panos81k]

Καλησπέρα, αγόρασα πρόσφατα ένα Dell με προεγκατεστημένα το ubuntu 12.04. Έκανα κανονικά την εγκατάσταση τους και τις απαιτούμενες ενέργειες και την ενημέρωση τους. Μέχρι τότε δούλευε κανονικά το wireless modem. Έκτοτε διαπίστωσα ότι δεν δούλευε ούτε μπορούσα να το ενεργοποιήσω ούτε από το μενού ούτε από το πληκτρολόγιο (το λαπτοπ δεν έχει κάποιο άλλο κουμπί να το ενεργοποιεί).
Τα αποτελέσματα της [dmesg] είναι :

Κώδικας: Επιλογή όλων

[ 0.879335] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.882355] Switching to clocksource hpet
[ 0.888906] AppArmor: AppArmor Filesystem Enabled
[ 0.888929] pnp: PnP ACPI init
[ 0.888946] ACPI: bus type pnp registered
[ 0.889313] pnp 00:00: [bus 00-fe]
[ 0.889316] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.889319] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.889321] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.889323] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.889325] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.889328] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.889330] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.889334] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.889336] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.889338] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.889340] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.889342] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.889344] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.889347] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.889349] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.889351] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.889353] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.889355] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[ 0.889358] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.889422] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.889437] pnp 00:01: [io 0x0000-0x001f]
[ 0.889439] pnp 00:01: [io 0x0081-0x0091]
[ 0.889441] pnp 00:01: [io 0x0093-0x009f]
[ 0.889443] pnp 00:01: [io 0x00c0-0x00df]
[ 0.889445] pnp 00:01: [dma 4]
[ 0.889471] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.889481] pnp 00:02: [mem 0xff010000-0xffffffff]
[ 0.889505] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.889586] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.889610] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.889620] pnp 00:04: [io 0x00f0]
[ 0.889631] pnp 00:04: [irq 13]
[ 0.889656] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.889670] pnp 00:05: [io 0x002e-0x002f]
[ 0.889672] pnp 00:05: [io 0x004e-0x004f]
[ 0.889674] pnp 00:05: [io 0x0061]
[ 0.889676] pnp 00:05: [io 0x0063]
[ 0.889677] pnp 00:05: [io 0x0065]
[ 0.889679] pnp 00:05: [io 0x0067]
[ 0.889681] pnp 00:05: [io 0x0070]
[ 0.889682] pnp 00:05: [io 0x0080]
[ 0.889684] pnp 00:05: [io 0x0092]
[ 0.889686] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.889688] pnp 00:05: [io 0x0680-0x069f]
[ 0.889690] pnp 00:05: [io 0x1000-0x100f]
[ 0.889692] pnp 00:05: [io 0xffff]
[ 0.889693] pnp 00:05: [io 0xffff]
[ 0.889695] pnp 00:05: [io 0x0400-0x0453]
[ 0.889697] pnp 00:05: [io 0x0458-0x047f]
[ 0.889699] pnp 00:05: [io 0x0500-0x057f]
[ 0.889701] pnp 00:05: [io 0x164e-0x164f]
[ 0.889703] pnp 00:05: [io 0xfd60-0xfd63]
[ 0.889748] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.889751] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.889754] system 00:05: [io 0xffff] has been reserved
[ 0.889756] system 00:05: [io 0xffff] has been reserved
[ 0.889759] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.889762] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.889764] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.889767] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.889769] system 00:05: [io 0xfd60-0xfd63] has been reserved
[ 0.889773] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.889782] pnp 00:06: [io 0x0070-0x0077]
[ 0.889788] pnp 00:06: [irq 8]
[ 0.889811] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.889841] pnp 00:07: [io 0x0454-0x0457]
[ 0.889878] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.889881] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.889898] pnp 00:08: [io 0x0060]
[ 0.889900] pnp 00:08: [io 0x0064]
[ 0.889905] pnp 00:08: [irq 1]
[ 0.889954] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.889973] pnp 00:09: [irq 12]
[ 0.889999] pnp 00:09: Plug and Play ACPI device, IDs DLL0597 PNP0f13 (active)
[ 0.946451] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.946453] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.946455] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.946457] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.946459] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.946461] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.946463] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.946465] pnp 00:0a: [mem 0xff000000-0xff000fff]
[ 0.946467] pnp 00:0a: [mem 0xff010000-0xffffffff]
[ 0.946469] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.946471] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
[ 0.946519] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.946522] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.946524] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.946527] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.946530] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.946533] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.946535] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.946538] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[ 0.946541] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.946544] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.946547] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
[ 0.946550] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.946837] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 0.946839] pnp 00:0b: [mem 0x40004000-0x40004fff]
[ 0.946898] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.946900] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
[ 0.946904] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.946925] pnp: PnP ACPI: found 12 devices
[ 0.946927] ACPI: ACPI bus type pnp unregistered
[ 0.953997] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.954002] PCI: max bus depth: 1 pci_try_num: 2
[ 0.954031] pci 0000:00:1c.1: BAR 15: assigned [mem 0xafb00000-0xafbfffff pref]
[ 0.954034] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.954039] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.954048] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.954057] pci 0000:02:00.0: BAR 6: assigned [mem 0xafb00000-0xafb0ffff pref]
[ 0.954060] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.954066] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.954071] pci 0000:00:1c.1: bridge window [mem 0xafb00000-0xafbfffff pref]
[ 0.954094] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.954101] pci 0000:00:1c.0: setting latency timer to 64
[ 0.954115] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.954120] pci 0000:00:1c.1: setting latency timer to 64
[ 0.954125] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.954128] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.954130] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.954132] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[ 0.954135] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.954138] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.954140] pci_bus 0000:02: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.954143] pci_bus 0000:02: resource 2 [mem 0xafb00000-0xafbfffff pref]
[ 0.954178] NET: Registered protocol family 2
[ 0.954327] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.955146] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.956915] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.957131] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.957133] TCP reno registered
[ 0.957146] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.957170] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.957264] NET: Registered protocol family 1
[ 0.957282] pci 0000:00:02.0: Boot video device
[ 0.957302] pci 0000:00:14.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.958598] pci 0000:00:14.0: PCI INT A disabled
[ 0.958613] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.974340] pci 0000:00:1a.0: PCI INT A disabled
[ 0.974366] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.990333] pci 0000:00:1d.0: PCI INT A disabled
[ 0.990357] PCI: CLS 64 bytes, default 64
[ 0.990359] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.990362] Placing 64MB software IO TLB between ffff8800a63bc000 - ffff8800aa3bc000
[ 0.990364] software IO TLB at phys 0xa63bc000 - 0xaa3bc000
[ 0.990376] Simple Boot Flag at 0x44 set to 0x1
[ 0.990901] audit: initializing netlink socket (disabled)
[ 0.990910] type=2000 audit(1385760333.816:1): initialized
[ 1.019369] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.021326] VFS: Disk quotas dquot_6.5.2
[ 1.021379] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.021884] fuse init (API version 7.17)
[ 1.021983] msgmni has been set to 7652
[ 1.022399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.022431] io scheduler noop registered
[ 1.022433] io scheduler deadline registered
[ 1.022466] io scheduler cfq registered (default)
[ 1.022666] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.022686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.022736] intel_idle: MWAIT substates: 0x21120
[ 1.022738] intel_idle: v0.4 model 0x3A
[ 1.022740] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.022809] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.022862] ACPI: AC Adapter [ACAD] (off-line)
[ 1.022971] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 1.022977] ACPI: Power Button [PWRB]
[ 1.023027] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.023053] ACPI: Lid Switch [LID0]
[ 1.023092] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.023096] ACPI: Power Button [PWRF]
[ 1.083207] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.083216] ACPI: Battery Slot [BAT1] (battery present)
[ 1.083261] ERST: Table is not found!
[ 1.083263] GHES: HEST is not enabled!
[ 1.083357] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.370255] ACPI: Battery Slot [BAT1] (battery present)
[ 1.398561] Linux agpgart interface v0.103
[ 1.398641] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.398811] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.400375] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.400491] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 1.401860] brd: module loaded
[ 1.402598] loop: module loaded
[ 1.402719] ahci 0000:00:1f.2: version 3.0
[ 1.402741] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.402790] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.418206] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.418211] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.418217] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.426660] scsi0 : ahci
[ 1.426760] scsi1 : ahci
[ 1.426839] scsi2 : ahci
[ 1.426914] scsi3 : ahci
[ 1.426992] scsi4 : ahci
[ 1.427064] scsi5 : ahci
[ 1.427166] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 40
[ 1.427169] ata2: DUMMY
[ 1.427172] ata3: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617200 irq 40
[ 1.427174] ata4: DUMMY
[ 1.427176] ata5: DUMMY
[ 1.427177] ata6: DUMMY
[ 1.427572] Fixed MDIO Bus: probed
[ 1.427590] tun: Universal TUN/TAP device driver, 1.6
[ 1.427592] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.427651] PPP generic driver version 2.4.2
[ 1.427762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.427780] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.427800] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.427804] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.427858] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.427888] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.431777] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.431795] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc0619000
[ 1.446182] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.446320] hub 1-0:1.0: USB hub found
[ 1.446324] hub 1-0:1.0: 2 ports detected
[ 1.446384] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.446402] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.446407] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.446462] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.446486] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.450386] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.450401] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc0618000
[ 1.466174] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.466297] hub 2-0:1.0: USB hub found
[ 1.466301] hub 2-0:1.0: 2 ports detected
[ 1.466358] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.466369] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.466396] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.466432] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.466436] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.466486] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.466578] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.466626] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 1.466751] xHCI xhci_add_endpoint called for root hub
[ 1.466754] xHCI xhci_check_bandwidth called for root hub
[ 1.466780] hub 3-0:1.0: USB hub found
[ 1.466788] hub 3-0:1.0: 4 ports detected
[ 1.466844] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.466890] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.466987] xHCI xhci_add_endpoint called for root hub
[ 1.466989] xHCI xhci_check_bandwidth called for root hub
[ 1.467014] hub 4-0:1.0: USB hub found
[ 1.467022] hub 4-0:1.0: 4 ports detected
[ 1.502202] usbcore: registered new interface driver libusual
[ 1.502240] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.517851] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.517858] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.517998] mousedev: PS/2 mouse device common for all mice
[ 1.518197] rtc_cmos 00:06: RTC can wake from S4
[ 1.518316] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.518346] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.518422] device-mapper: uevent: version 1.0.3
[ 1.518497] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.518621] cpuidle: using governor ladder
[ 1.518808] cpuidle: using governor menu
[ 1.518810] EFI Variables Facility v0.08 2004-May-17
[ 1.519015] TCP cubic registered
[ 1.519114] NET: Registered protocol family 10
[ 1.519560] NET: Registered protocol family 17
[ 1.519565] Registering the dns_resolver key type
[ 1.519720] PM: Hibernation image not present or could not be loaded.
[ 1.519732] registered taskstats version 1
[ 1.527334] Magic number: 5:813:450
[ 1.527441] rtc_cmos 00:06: setting system clock to 2013-11-29 21:25:35 UTC (1385760335)
[ 1.528353] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.528355] EDD information not available.
[ 1.533288] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.746152] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.751616] ata3.00: ATAPI: PLDS DVD+/-RW DU-8A5HH, SD12, max UDMA/100
[ 1.752490] ata3.00: configured for UDMA/100
[ 1.754131] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.758141] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.780948] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
[ 1.780953] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.820089] ata1.00: configured for UDMA/133
[ 1.820237] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 0001 PQ: 0 ANSI: 5
[ 1.820509] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.820513] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.820574] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.820788] sd 0:0:0:0: [sda] Write Protect is off
[ 1.820796] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.820929] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.826284] scsi 2:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5HH SD12 PQ: 0 ANSI: 5
[ 1.841314] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.841319] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.841576] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.841707] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.878039] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.879242] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.880859] Freeing unused kernel memory: 924k freed
[ 1.880972] Write protecting the kernel read-only data: 12288k
[ 1.886083] Freeing unused kernel memory: 1588k freed
[ 1.890053] Freeing unused kernel memory: 1188k freed
[ 1.890745] hub 1-1:1.0: USB hub found
[ 1.890823] hub 1-1:1.0: 6 ports detected
[ 1.907632] udevd[106]: starting version 175
[ 1.941338] Btrfs loaded
[ 1.956084] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.956110] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.956153] r8169 0000:01:00.0: setting latency timer to 64
[ 1.956239] r8169 0000:01:00.0: irq 42 for MSI/MSI-X
[ 1.956774] r8169 0000:01:00.0: eth0: RTL8105e at 0xffffc90000634000, 74:86:7a:49:89:39, XID 00c00000 IRQ 42
[ 1.960005] xor: automatically using best checksumming function: generic_sse
[ 1.977991] generic_sse: 7133.000 MB/sec
[ 1.977995] xor: using function: generic_sse (7133.000 MB/sec)
[ 1.978816] device-mapper: dm-raid45: initialized v0.2594b
[ 1.990031] Refined TSC clocksource calibration: 1795.920 MHz.
[ 1.990037] Switching to clocksource tsc
[ 2.002018] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.134689] hub 2-1:1.0: USB hub found
[ 2.134742] hub 2-1:1.0: 6 ports detected
[ 2.301967] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 2.325034] input: Sweex Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input4
[ 2.325262] generic-usb 0003:177F:0402.0001: input,hidraw0: USB HID v1.10 Mouse [Sweex Wireless Mouse] on usb-0000:00:14.0-2/input0
[ 2.325286] usbcore: registered new interface driver usbhid
[ 2.325289] usbhid: USB HID core driver
[ 2.390126] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 2.558053] usb 1-1.3: new high-speed USB device number 4 using ehci_hcd
[ 2.721995] usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
[ 3.254140] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.153090] Adding 8131580k swap on /dev/sda5. Priority:-1 extents:1 across:8131580k
[ 13.158577] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.196771] udevd[387]: starting version 175
[ 13.224821] lp: driver loaded but no devices found
[ 13.320353] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.320775] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.320785] mei 0000:00:16.0: setting latency timer to 64
[ 13.320868] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 13.322119] [drm] Initialized drm 1.1.0 20060810
[ 13.327019] wmi: Mapper loaded
[ 13.333846] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.333853] i915 0000:00:02.0: setting latency timer to 64
[ 13.334625] Bluetooth: Core ver 2.16
[ 13.334648] NET: Registered protocol family 31
[ 13.334651] Bluetooth: HCI device and connection manager initialized
[ 13.334654] Bluetooth: HCI socket layer initialized
[ 13.334657] Bluetooth: L2CAP socket layer initialized
[ 13.334665] Bluetooth: SCO socket layer initialized
[ 13.334932] Bluetooth: Atheros AR30xx firmware driver ver 1.0.1
[ 13.371251] Linux video capture interface: v2.00
[ 13.372296] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64ad)
[ 13.385440] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.386539] Initializing rts5139 USB card reader driver...
[ 13.394259] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 13.394857] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 13.395845] usbcore: registered new interface driver rts5139
[ 13.395849] Realtek rts5139 USB card reader support registered.
[ 13.395884] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 13.396970] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 13.413116] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5
[ 13.413560] usbcore: registered new interface driver uvcvideo
[ 13.413564] USB Video Class driver (1.1.1)
[ 13.422690] device-mapper: multipath: version 1.3.1 loaded
[ 13.428509] lib80211: common routines for IEEE802.11 drivers
[ 13.428513] lib80211_crypt: registered algorithm 'NULL'
[ 13.448130] mtrr: no more MTRRs available
[ 13.448135] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 13.448841] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 13.448849] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.448852] [drm] Driver supports precise vblank timestamp query.
[ 13.448970] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 13.449338] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 13.464913] type=1400 audit(1385760347.437:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=495 comm="apparmor_parser"
[ 13.466154] type=1400 audit(1385760347.437:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=495 comm="apparmor_parser"
[ 13.466471] type=1400 audit(1385760347.441:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=495 comm="apparmor_parser"
[ 13.477299] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 13.510884] type=1400 audit(1385760347.485:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=580 comm="apparmor_parser"
[ 13.511506] type=1400 audit(1385760347.485:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser"
[ 13.511783] type=1400 audit(1385760347.485:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser"
[ 13.514080] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 13.612628] cfg80211: Calling CRDA to update world regulatory domain
[ 13.637169] usbcore: registered new interface driver ath3k
[ 13.638109] Bluetooth: Generic Bluetooth USB driver ver 1.0.1
[ 13.638164] usbcore: registered new interface driver btusb
[ 13.670866] wl: module license 'MIXED/Proprietary' taints kernel.
[ 13.670870] Disabling lock debugging due to kernel taint
[ 13.720982] usb 1-1.1: USB disconnect, device number 3
[ 13.834888] cfg80211: World regulatory domain updated:
[ 13.834894] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.834898] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.834902] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.834905] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.834909] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.834912] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.918345] usb 1-1.1: new full-speed USB device number 6 using ehci_hcd
[ 13.960942] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 14.043712] fbcon: inteldrmfb (fb0) is primary device
[ 14.043818] Console: switching to colour frame buffer device 170x48
[ 14.043845] fb0: inteldrmfb frame buffer device
[ 14.043847] drm: registered panic notifier
[ 14.051569] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00
[ 14.063594] ACPI Warning: _BQC returned an invalid level (20110623/video-526)
[ 14.063739] acpi device:31: registered as cooling_device4
[ 14.064017] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 14.064090] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.064154] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.064208] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.064281] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 14.064314] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 14.119889] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 14.384993] init: failsafe main process (890) killed by TERM signal
[ 14.587523] ppdev: user-space parallel port driver
[ 14.597242] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.597247] Bluetooth: BNEP filters: protocol multicast
[ 14.600831] Bluetooth: RFCOMM TTY layer initialized
[ 14.600840] Bluetooth: RFCOMM socket layer initialized
[ 14.600844] Bluetooth: RFCOMM ver 1.11
[ 14.615193] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.617264] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.617401] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.619123] type=1400 audit(1385760348.593:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=968 comm="apparmor_parser"
[ 14.619744] type=1400 audit(1385760348.593:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=968 comm="apparmor_parser"
[ 14.696410] type=1400 audit(1385760348.669:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=999 comm="apparmor_parser"
[ 14.696970] type=1400 audit(1385760348.669:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=999 comm="apparmor_parser"
[ 14.932819] r8169 0000:01:00.0: eth0: link down
[ 14.932827] r8169 0000:01:00.0: eth0: link down
[ 14.933349] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.933849] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.268614] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 15000000, was 12060000
[ 15.318885] init: plymouth-stop pre-start process (1268) terminated with status 1
[ 16.451064] r8169 0000:01:00.0: eth0: link up
[ 16.451580] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 106.654482] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 00070000, was 15000000

Αν κάποιος γνωρίζει ας με βοηθήσει.
Ευχαριστώ.

[Delis]

Κάθε κάρτα δικτύου (ή οποιαδήποτε συσκευή) διαφέρει από μία άλλη.
Πρακτικά αυτό σημαίνει πως τα προγράμματα που διαχειρίζονται τις κάρτες (οι οδηγοί τους) είναι ειδικά γραμμένοι για τις συγκεκριμένες κάρτες.
Τι σημαίνει όμως αυτό, αυτό σημαίνει πως για να δοκιμάσει κάποιος έναν οδηγό για μία κάρτα ώστε να δει αν δουλεύει, πρέπει να έχει την εν λόγω κάρτα.

Αν εγώ θέλω να σε βοηθήσω εσένα ώστε να διαπιστώσω τι πάει στραβά με την κάρτα σου, πρέπει να έχω την ίδια κάρτα. Κάτι που δεν ισχύει.
Από τη στιγμή που δεν ισχύει αυτό, η μόνη επιλογή που έχω αν θέλω να σε βοηθήσω είναι να κάνω αναζήτηση στη Google και να στηριχτώ σε απαντήσεις άλλων που έχουν την ίδια κάρτα.
Κάτι τέτοιο ίσως ακούγεται εύκολο, αλλά δεν είναι.
Έψαξα αρκετά στη Google για να βρω λύση για το πρόβλημά σου.
Βρήκα σειρά από εντολές εκ των οποίων μερικές δεν ήξερα τι κάνουν, οπότε έπρεπε να τις δοκιμάσω στον υπολογιστή μου για να το διαπιστώσω, ή να κάνω ακόμα μερικές αναζητήσεις για να δω τι κάνουν.
Αυτό μόνο και μόνο για να μην πω καμιά βλακεία χωρίς πρώτα να την έχω εξετάσει και σου χαλάσω τον υπολογιστή.

Η αναζήτηση στη Google με κάνει να πιστεύω πως η κάρτα σου υποστηρίζεται κανονικά από τον πυρήνα του Ubuntu, ωστόσο δεν λειτουργεί το Internet.
Βρήκα στα αποτελέσματα μία διαδικασία της οποίας τους συνδέσμους παρέθεσα σε αυτή την απάντηση, τονίζοντας πως πρέπει να περιμένεις περισσότερες απαντήσεις διότι πρέπει να αφήσουμε αυτή τη διαδικασία ως τελευταία λύση λόγω της φύσης της.
Αν τελικά δεν έβγαινε άκρη, σου είπα πως θα σε καθοδηγούσα εγώ με τα βήματα της διαδικασίας. Παρόλα αυτά εσύ ξεκίνησες μόνος σου.

Σου είπα στη συνέχεια πως χρειάζεται υπομονή και ανέφερες πως δεν κατάφερες κάτι και πως το βράδυ θα είχες νεότερα. Παρόλα αυτά δεν ανέφερες νεότερα.
Ο the_eye σε ρώτησε αν λειτουργεί το internet από Live της 12.04. Δεν απάντησες, ενώ αν το γνωρίζαμε αυτό θα μας έδειχνε κάποια στοιχεία.

Πρέπει να έχεις στο μυαλό σου επίσης πως δεν πληρώνει κάποιος κανέναν από εμάς για να παρέχουμε υποστήριξη σε χρήστες. Ο καθένας το κάνει για τους δικούς του λόγους, εθελοντικά και στον ελεύθερο χρόνο του.
Επίσης το ότι είμαστε γραμμένοι στο forum και προσπαθούμε να παρέχουμε υποστήριξη, δεν μας κάνει και παντογνώστες ούτε experts στους υπολογιστές (μιλάω για τον εαυτό μου). Η πλειοψηφία των μελών δεν ασχολείται επαγγελματικά με την πληροφορική.
Οπότε το ότι δεν σε βοήθησα εγώ ή κάποιος άλλος (πράγμα που δεν ισχύει) μπορεί απλά να σημαίνει πως δεν γνωρίζω πως να σε βοηθήσω.
Ανέφερες πως το πήγες σε τεχνικό, πράγμα που σημαίνει πως το είδε επαγγελματίας και δεν έγινε κάτι, ενώ παρόλα αυτά περιμένεις από εμένα αποτελέσματα.

Όταν σου είπα να περιμένεις για περισσότερες απαντήσεις, στο ενδιάμεσο κατέβασα το αρχείο από το dropbox που αναφέρει ο οδηγός στους συνδέσμους για να διαβάσω τι έχει μέσα. Το dropbox δεν είναι αξιόπιστη πηγή για λήψη λογισμικού οπότε δεν μπορώ να σου προτείνω ελαφρά τη καρδία να κατεβάσεις και να εγκαταστήσεις το περιεχόμενο, χωρίς να γνωρίζω αν το έχει τροποποιήσει κάποιος ή αν περιέχει κακόβουλο λογισμικό μέσα.

Όλα αυτά δεν στα αναφέρω για να σου πω πως ταλαιπωρήθηκα. Άμα ήταν ταλαιπωρία δεν θα το έκανα στο κάτω κάτω. Είναι το χόμπι μου.
Κανείς δεν με αναγκάζει να το κάνω.
Στα αναφέρω για να γίνει κατανοητή η διαδικασία υποστήριξης ενός μέλους και πως δεν είναι πάντα απλή και "ακίνδυνη".
Ελπίζω να μπεις στην διαδικασία να την κάνεις και εσύ, ώστε να το διαπιστώσεις εκ πείρας.
Πάντα υπάρχει ανάγκη για ενεργά μέλη στο forum.

Αν θεωρείς πως έκανα κάτι λάθος, αποτέλεσμα του οποίου είναι η παραπάνω δημοσίευσή σου, ευχαρίστως να το ακούσω και να απολογηθώ.

Αν λοιπόν αλλάξεις γνώμη για το «WINDOWS και πάλι WINDOWS», πες το εδώ ώστε να προχωρήσουμε με τη διαδικασία της μεταγλώττισης του οδηγού, γράψε εδώ για να ξεκινήσουμε.

Είναι πολύ σημαντικά αυτά που αναφέρεις και σ ευχαριστώ. Αλλά εξακολουθώ να μην αντιλαμβάνομαι τί λαθος έκανα με την επισύναψη του κώδικα. οπότε η μόνη απάντηση που έλαβα ήταν επεξήγηση για το πώς ανεβάζω τον κώδικα.
Τέλος πάντων, εγώ ακόμα με καλώδιο τον έχω ...