Drivers και εγκατάσταση asus usb-n10 wifi

[mike-doc]

και πάλι τίποτα και νομίζω ότι έκανα βλακεία....
άνοιξα το έγγραφο που μου είπες και πήγα στην τελευταία γραμμή και δίπλα από το blacklist είχε κάτι amd64....κάτι τέτοιο και το αντικατέστησα με αυτό που μου έδωσες....
έπρεπε να το αντικαταστήσω ή απλά να το προσθέσω?

Off topic:
Aυτό που άλλαξες ήταν

Κώδικας: Επιλογή όλων

blacklist amd76x_edac

Την ξαναπρόσθεσα την γραμμή που διέγραψα πάντως... Και μετά έκανα επανεκκίνηση.

[idomeneas]

Η συσκευη που έχεις ειναι αυτήν: 148f:2573
κι απότι φαινεται εδω
viewtopic.php?f=16&t=489&p=61566&hilit=148f%3A2573#p61566
θα επρεπε να δουλεύει κατευθείαν.

Το προβλημα σου ήταν ότι φορτωνε δυο διαφορετικους οδηγούς συγχρονως. Μετα το blacklist του rt2500usb θα επρεπε επομένως να δουλεύει. Δώσε μας το αποτελεσμα της εντολης

Κώδικας: Επιλογή όλων

lsmod


για να επιβεβαιώσουμε ότι έκανες το blacklist σωστα.

Υπάρχει ο εξής προβληματισμός εδώ. Στην αρχή στο 1ο ποστ έδωσε αποτέλεσμα ID 148f:2573 (που δεν είναι το Asus) και μετά που συνέδεσε το σωστό stick έδωσε φυσικά άλλο ID. Προφανώς θέλει το asus να κάνει να λειτουργήσει... Και εγώ κάπου μπερδεύτηκα με αυτό.

[logari81]

αυτο που δεν καταλαβάινω ειναι γιατι φορτώνεται και το r8192usb:

r8192s_usb 287340 0

έχεις κάνει κάτι ή μηπως εχεις συνδεμένη και κάποια δευτερη συσκευή ασύρματου;

[logari81]

λοιπον καταρχήν για να βγαλουμε άκρη συνεδεσε και τα 2 στικ που έχεις και δώσε μας το αποτελεσμα της εντολής

Κώδικας: Επιλογή όλων

lsusb

[idomeneas]

Αυτό το ΙD 0b05:1786 είναι της Asus που θέλει να δουλέψει και προφανώς έχει τον rtl8192su Για αυτό δε φορτωνοταν το firmware όπως φαίνεται στο dmesg.

[mike-doc]

το asus θέλω να ενεργοποιήσω για να πιάνει.....
τα αποτελέσματα της εντολής με συνδεδεμένα και τα 2 sticks:

Κώδικας: Επιλογή όλων

mike@mike-desktop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 0b05:1786 ASUSTek Computer, Inc.
Bus 001 Device 006: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


[logari81]

ωραία τώρα άσε μονο το asus συνδεμένο και δώσε μας παλι τα αποτελέματα των εντολών

Κώδικας: Επιλογή όλων

lsmod
dmesg


να επιβεβαιώσουμε ότι όλα πανε καλά μεχρι εδώ και μετα δοκίμασε οπως σου ειπε ο idomeneas να συνδεθεις χωρις κρυπτογραφηση στο ρουτερ.

https://answers.launchpad.net/ubuntu/+question/133593

[mike-doc]

με το asus μέσα:

Κώδικας: Επιλογή όλων

[ 0.172681] pci 0000:00:1f.2: reg 14: [io 0xb080-0xb083]
[ 0.172686] pci 0000:00:1f.2: reg 18: [io 0xb000-0xb007]
[ 0.172691] pci 0000:00:1f.2: reg 1c: [io 0xac00-0xac03]
[ 0.172696] pci 0000:00:1f.2: reg 20: [io 0xa880-0xa88f]
[ 0.172715] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.172719] pci 0000:00:1f.2: PME# disabled
[ 0.172759] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.172818] pci 0000:03:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.172826] pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.172834] pci 0000:03:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.172840] pci 0000:03:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.172845] pci 0000:03:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.180013] pci 0000:00:01.0: PCI bridge to [bus 03-03]
[ 0.180017] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.180020] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.180025] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.180060] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.180064] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.180068] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.180073] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.180136] pci 0000:01:00.0: reg 10: [io 0xc800-0xc8ff]
[ 0.180154] pci 0000:01:00.0: reg 18: [mem 0xf9fff000-0xf9ffffff 64bit]
[ 0.180173] pci 0000:01:00.0: reg 30: [mem 0xf9fc0000-0xf9fdffff pref]
[ 0.180215] pci 0000:01:00.0: supports D1 D2
[ 0.180217] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.180222] pci 0000:01:00.0: PME# disabled
[ 0.180233] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.180242] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
[ 0.180245] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
[ 0.180249] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.180254] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.180293] pci 0000:04:01.0: reg 10: [mem 0xfebf0000-0xfebfffff]
[ 0.180299] pci 0000:04:01.0: reg 14: [io 0xec00-0xec07]
[ 0.180334] pci 0000:04:01.0: PME# supported from D3hot D3cold
[ 0.180338] pci 0000:04:01.0: PME# disabled
[ 0.180377] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.180381] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.180384] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.180389] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.180392] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.180394] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.180409] pci_bus 0000:00: on NUMA node 0
[ 0.180414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.180562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.180618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.180722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.180777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.184419] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.184515] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.184605] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.184695] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.184788] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.184879] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.184970] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.185059] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.185100] HEST: Table is not found!
[ 0.185181] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.185184] vgaarb: loaded
[ 0.185332] SCSI subsystem initialized
[ 0.185411] libata version 3.00 loaded.
[ 0.185460] usbcore: registered new interface driver usbfs
[ 0.185471] usbcore: registered new interface driver hub
[ 0.185491] usbcore: registered new device driver usb
[ 0.185610] ACPI: WMI: Mapper loaded
[ 0.185612] PCI: Using ACPI for IRQ routing
[ 0.185616] PCI: pci_cache_line_size set to 64 bytes
[ 0.185680] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.185683] reserve RAM buffer: 000000003ffb0000 - 000000003fffffff
[ 0.185770] NetLabel: Initializing
[ 0.185772] NetLabel: domain hash size = 128
[ 0.185773] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.185785] NetLabel: unlabeled traffic allowed by default
[ 0.185905] hpet clockevent registered
[ 0.185908] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.185913] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.185917] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.192024] Switching to clocksource tsc
[ 0.201922] AppArmor: AppArmor Filesystem Enabled
[ 0.201945] pnp: PnP ACPI init
[ 0.201969] ACPI: bus type pnp registered
[ 0.206041] pnp: PnP ACPI: found 17 devices
[ 0.206043] ACPI: ACPI bus type pnp unregistered
[ 0.206047] PnPBIOS: Disabled by ACPI PNP
[ 0.206059] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.206067] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.206070] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.206072] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.206075] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.206077] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.206080] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.206085] system 00:0a: [mem 0xffc00000-0xfff7ffff] has been reserved
[ 0.206090] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.206093] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.206098] system 00:0e: [io 0x0290-0x029f] has been reserved
[ 0.206102] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.206107] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.206110] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.206113] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.206115] system 00:10: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.242014] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x403fffff]
[ 0.242022] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.242025] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.242029] pci 0000:00:01.0: PCI bridge to [bus 03-03]
[ 0.242031] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.242035] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.242038] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.242043] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.242045] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.242050] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x403fffff]
[ 0.242053] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.242059] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
[ 0.242062] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
[ 0.242066] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.242070] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.242077] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.242080] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.242085] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.242088] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.242105] alloc irq_desc for 16 on node -1
[ 0.242107] alloc kstat_irqs on node -1
[ 0.242116] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.242120] pci 0000:00:01.0: setting latency timer to 64
[ 0.242127] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.242131] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.242134] pci 0000:00:1c.0: setting latency timer to 64
[ 0.242141] alloc irq_desc for 17 on node -1
[ 0.242143] alloc kstat_irqs on node -1
[ 0.242146] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.242150] pci 0000:00:1c.1: setting latency timer to 64
[ 0.242156] pci 0000:00:1e.0: setting latency timer to 64
[ 0.242160] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.242162] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.242164] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.242166] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.242169] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.242171] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.242173] pci_bus 0000:02: resource 1 [mem 0x40000000-0x403fffff]
[ 0.242175] pci_bus 0000:02: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.242177] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.242179] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.242182] pci_bus 0000:01: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.242184] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.242186] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.242188] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.242190] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[ 0.242236] NET: Registered protocol family 2
[ 0.242314] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.242554] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.243348] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.243758] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.243761] TCP reno registered
[ 0.243763] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.243775] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.243874] NET: Registered protocol family 1
[ 0.244016] pci 0000:03:00.0: Boot video device
[ 0.244024] PCI: CLS 32 bytes, default 64
[ 0.244229] cpufreq-nforce2: No nForce2 chipset.
[ 0.244255] Scanning for low memory corruption every 60 seconds
[ 0.244388] audit: initializing netlink socket (disabled)
[ 0.244408] type=2000 audit(1289737372.240:1): initialized
[ 0.253454] highmem bounce pool size: 64 pages
[ 0.253459] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.254788] VFS: Disk quotas dquot_6.5.2
[ 0.254843] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.255363] fuse init (API version 7.14)
[ 0.255442] msgmni has been set to 1709
[ 0.255706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.255708] io scheduler noop registered
[ 0.255710] io scheduler deadline registered
[ 0.255721] io scheduler cfq registered (default)
[ 0.255817] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.255840] alloc irq_desc for 40 on node -1
[ 0.255842] alloc kstat_irqs on node -1
[ 0.255856] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.255893] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.255920] alloc irq_desc for 41 on node -1
[ 0.255922] alloc kstat_irqs on node -1
[ 0.255927] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.255992] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.256018] alloc irq_desc for 42 on node -1
[ 0.256019] alloc kstat_irqs on node -1
[ 0.256025] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.256102] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.256352] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 1849 ss_did 27d0
[ 0.256384] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.256396] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 1849 ss_did 27d2
[ 0.256419] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.256426] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.256513] intel_idle: MWAIT substates: 0x220
[ 0.256515] intel_idle: does not run on family 6 model 15
[ 0.256609] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.256614] ACPI: Power Button [PWRB]
[ 0.256653] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.256656] ACPI: Power Button [PWRF]
[ 0.256843] ACPI: acpi_idle registered with cpuidle
[ 0.259117] ERST: Table is not found!
[ 0.259232] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.259323] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.259760] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.260835] brd: module loaded
[ 0.261312] loop: module loaded
[ 0.261474] ata_piix 0000:00:1f.1: version 2.13
[ 0.261488] alloc irq_desc for 18 on node -1
[ 0.261489] alloc kstat_irqs on node -1
[ 0.261496] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.261534] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.261596] scsi0 : ata_piix
[ 0.261659] scsi1 : ata_piix
[ 0.262973] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.262976] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.262992] alloc irq_desc for 19 on node -1
[ 0.262993] alloc kstat_irqs on node -1
[ 0.262998] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.263002] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.263032] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.263071] scsi2 : ata_piix
[ 0.263118] scsi3 : ata_piix
[ 0.263150] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 19
[ 0.263153] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 19
[ 0.263445] Fixed MDIO Bus: probed
[ 0.263476] PPP generic driver version 2.4.2
[ 0.263508] tun: Universal TUN/TAP device driver, 1.6
[ 0.263510] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.263581] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.263596] alloc irq_desc for 23 on node -1
[ 0.263598] alloc kstat_irqs on node -1
[ 0.263602] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.263620] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.263623] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.263651] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.263672] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.263680] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.267571] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.267585] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9efbc00
[ 0.268141] isapnp: Scanning for PnP cards...
[ 0.271634] ata2: port disabled. ignoring.
[ 0.280130] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.280265] hub 1-0:1.0: USB hub found
[ 0.280269] hub 1-0:1.0: 8 ports detected
[ 0.280344] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.280358] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.280395] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.280402] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.280405] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.280443] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.280465] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.280565] hub 2-0:1.0: USB hub found
[ 0.280568] hub 2-0:1.0: 2 ports detected
[ 0.280618] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.280623] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.280626] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.280652] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.280671] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[ 0.280768] hub 3-0:1.0: USB hub found
[ 0.280771] hub 3-0:1.0: 2 ports detected
[ 0.280819] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.280824] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.280827] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.280859] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.280887] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 0.280983] hub 4-0:1.0: USB hub found
[ 0.280986] hub 4-0:1.0: 2 ports detected
[ 0.281040] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.281045] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.281048] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.281075] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.281101] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 0.281203] hub 5-0:1.0: USB hub found
[ 0.281206] hub 5-0:1.0: 2 ports detected
[ 0.281321] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.281324] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.281827] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.281881] mice: PS/2 mouse device common for all mice
[ 0.281976] rtc_cmos 00:03: RTC can wake from S4
[ 0.282013] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.282034] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.282126] device-mapper: uevent: version 1.0.3
[ 0.301565] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.317480] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.332124] device-mapper: multipath: version 1.1.1 loaded
[ 0.332128] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.340261] EISA: Probing bus 0 at eisa.0
[ 0.340268] Cannot allocate resource for EISA slot 1
[ 0.340287] EISA: Detected 0 cards.
[ 0.352204] cpuidle: using governor ladder
[ 0.352206] cpuidle: using governor menu
[ 0.352518] TCP cubic registered
[ 0.352641] NET: Registered protocol family 10
[ 0.352981] lo: Disabled Privacy Extensions
[ 0.353188] NET: Registered protocol family 17
[ 0.353614] Using IPI No-Shortcut mode
[ 0.353706] PM: Resume from disk failed.
[ 0.353719] registered taskstats version 1
[ 0.353922] Magic number: 2:178:380
[ 0.354017] rtc_cmos 00:03: setting system clock to 2010-11-14 12:22:52 UTC (1289737372)
[ 0.354020] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.354021] EDD information not available.
[ 0.380581] Freeing initrd memory: 10516k freed
[ 0.432129] ata4.01: NODEV after polling detection
[ 0.432214] ata3.00: ATA-8: WDC WD5000AAKS-65YGA0, 12.01C02, max UDMA/133
[ 0.432217] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.440141] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
[ 0.448184] ata3.00: configured for UDMA/133
[ 0.456137] ata4.00: configured for UDMA/100
[ 0.621687] isapnp: No Plug & Play device found
[ 0.621869] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5
[ 0.622000] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.622060] sd 2:0:0:0: [sda] Write Protect is off
[ 0.622063] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.622081] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.622085] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.622345] sda:
[ 0.622840] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5
[ 0.626679] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.626682] Uniform CD-ROM driver Revision: 3.20
[ 0.626767] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.626806] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 0.648085] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 0.655933] sda1 sda2 < sda5 >
[ 0.687523] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.687540] Freeing unused kernel memory: 684k freed
[ 0.687978] Write protecting the kernel text: 4932k
[ 0.688018] Write protecting the kernel read-only data: 1976k
[ 0.701993] udev[84]: starting version 163
[ 0.792929] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.792958] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.792999] r8169 0000:01:00.0: setting latency timer to 64
[ 0.793049] alloc irq_desc for 43 on node -1
[ 0.793050] alloc kstat_irqs on node -1
[ 0.793064] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 0.793542] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8062000, 00:19:66:3e:46:97, XID 94200000 IRQ 43
[ 0.799044] Floppy drive(s): fd0 is 1.44M
[ 0.815735] FDC 0 is a post-1991 82077
[ 1.082748] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.156012] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 13.742022] udev[352]: starting version 163
[ 13.782431] intel_rng: FWH not detected
[ 13.834270] Adding 3068924k swap on /dev/sda5. Priority:-1 extents:1 across:3068924k
[ 13.854782] lp: driver loaded but no devices found
[ 13.875344] leds_ss4200: no LED devices found
[ 13.879273] Linux agpgart interface v0.103
[ 13.967533] parport_pc 00:07: reported by Plug and Play ACPI
[ 13.967583] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 13.986648] cfg80211: Calling CRDA to update world regulatory domain
[ 14.012652] ppdev: user-space parallel port driver
[ 14.028177] cfg80211: World regulatory domain updated:
[ 14.028182] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.028185] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.028188] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.028190] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.028193] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.028195] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.038651] nvidia: module license 'NVIDIA' taints kernel.
[ 14.038654] Disabling lock debugging due to kernel taint
[ 14.049148] lp0: using parport0 (interrupt-driven).
[ 14.112988] usbcore: registered new interface driver hiddev
[ 14.118516] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.118520] hda_intel: msi for device 1849:0888 set to 0
[ 14.118522] hda_intel: position_fix set to 1 for device 1849:0888
[ 14.118545] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.128380] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
[ 14.128478] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2/input0
[ 14.128498] usbcore: registered new interface driver usbhid
[ 14.128500] usbhid: USB HID core driver
[ 14.158102] type=1400 audit(1289737386.299:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=640 comm="apparmor_parser"
[ 14.158696] type=1400 audit(1289737386.299:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=640 comm="apparmor_parser"
[ 14.159019] type=1400 audit(1289737386.299:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=640 comm="apparmor_parser"
[ 14.163681] hda_codec: ALC888: BIOS auto-probing.
[ 14.175320] type=1400 audit(1289737386.315:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=712 comm="apparmor_parser"
[ 14.330796] phy0: Selected rate control algorithm 'minstrel'
[ 14.331375] Registered led device: rt73usb-phy0::radio
[ 14.331392] Registered led device: rt73usb-phy0::assoc
[ 14.331408] Registered led device: rt73usb-phy0::quality
[ 14.331866] usbcore: registered new interface driver rt73usb
[ 14.414830] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.581754] type=1400 audit(1289737386.723:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=928 comm="apparmor_parser"
[ 14.589041] type=1400 audit(1289737386.731:7): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=930 comm="apparmor_parser"
[ 14.596596] type=1400 audit(1289737386.739:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=930 comm="apparmor_parser"
[ 14.601304] type=1400 audit(1289737386.743:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=930 comm="apparmor_parser"
[ 14.608362] type=1400 audit(1289737386.751:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=931 comm="apparmor_parser"
[ 14.609094] type=1400 audit(1289737386.751:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=931 comm="apparmor_parser"
[ 14.651735] r8169 0000:01:00.0: eth0: link down
[ 14.651896] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.939970] nvidia 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.939980] nvidia 0000:03:00.0: setting latency timer to 64
[ 14.939984] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 14.940325] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 15.098645] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.417865] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 17.778983] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.056041] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 25.528238] wlan0: authenticate with 00:05:59:3a:54:0f (try 1)
[ 25.529862] wlan0: authenticated
[ 25.531348] wlan0: associate with 00:05:59:3a:54:0f (try 1)
[ 25.552356] wlan0: RX AssocResp from 00:05:59:3a:54:0f (capab=0x431 status=0 aid=2)
[ 25.552358] wlan0: associated
[ 25.566275] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.591241] padlock: VIA PadLock not detected.
[ 32.113128] lo: Disabled Privacy Extensions
[ 35.648007] wlan0: no IPv6 routers present
[ 86.805735] usb 1-8: USB disconnect, address 3
[ 86.824542] wlan0: deauthenticating from 00:05:59:3a:54:0f by local choice (reason=3)
[ 86.920528] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 86.920533] cfg80211: Restoring regulatory settings
[ 86.920536] cfg80211: Calling CRDA to update world regulatory domain
[ 86.923275] cfg80211: World regulatory domain updated:
[ 86.923278] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 86.923281] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 86.923284] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 86.923286] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 86.923288] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 86.923291] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 94.988017] usb 1-7: new high speed USB device using ehci_hcd and address 4
[ 95.183044] r8192s_usb: module is from the staging directory, the quality is unknown, you have been warned.
[ 95.188178] ieee80211_crypt: registered algorithm 'NULL'
[ 95.188181] ieee80211_crypt: registered algorithm 'TKIP'
[ 95.188183] ieee80211_crypt: registered algorithm 'CCMP'
[ 95.188185] ieee80211_crypt: registered algorithm 'WEP'
[ 95.188187]
[ 95.188188] Linux kernel driver for RTL8192 based WLAN cards
[ 95.188190] Copyright (c) 2007-2008, Realsil Wlan
[ 95.188517] ==>ep_num:4, in_ep_num:1, out_ep_num:3
[ 95.188519] ==>RtInPipes:3
[ 95.188522] ==>RtOutPipes:4 6 13
[ 95.188526] ==>txqueue_to_outpipemap for BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON:
[ 95.188528] 1 1 0 0 2 2 2 2 2
[ 95.336768] Dot11d_Init()
[ 95.337530] usbcore: registered new interface driver rtl819xU
[ 95.361051] udev[1837]: renamed network interface wlan0 to wlan1
[ 95.396646] rtl819xU:FirmwareRequest92S(): signature: 8192, version: 903f, size: 30, imemsize: c808, sram size: 9290
[ 95.398526] rtl819xU:FirmwareCheckReady(): LoadFWStatus(1), success
[ 95.402527] rtl819xU:FirmwareCheckReady(): LoadFWStatus(2), success
[ 95.402653] rtl819xU:FirmwareCheckReady(): DMEM code download success, CPUStatus(0x3f)
[ 95.404277] rtl819xU:FirmwareCheckReady(): polling load firmware ready, CPUStatus(ff)
[ 95.405276] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e)
[ 95.405401] rtl819xU:FirmwareCheckReady(): LoadFWStatus(3), success
[ 95.405403] rtl819xU:FirmwareDownload92S(): Firmware Download Success
[ 98.056198] ADDRCONF(NETDEV_UP): wlan1: link is not ready


πως απενεργοποιώ την κρυπτογράφηση;

[idomeneas]

Ετσι όπως είναι από τον Network Manager δε μπορείς να συνδεθείς στο δίκτυο σου ; Το encryption το απενεργοποιείς αν μπεις στο router. Για να μπεις πρέπει να πας στη

Κώδικας: Επιλογή όλων

http://192.168.1.1

και να επιλέξεις να μπαίνεις χωρίς κάποιο κωδικό.Αν δε μπορείς να συνδεθείς δώσε αποτέλεσμα από

Κώδικας: Επιλογή όλων

sudo iwlist scan

και

Κώδικας: Επιλογή όλων

iwconfig

[mike-doc]

Ναι. Πατάω να συνδεθεί και δεν γίνεται... Ξέρεις που μπορώ να βρω το id και το username για να μπω στις ρυθμίσεις του router; Και τα αποτελέσματα να τα δώσω αφού απενεργοποιήσω την ασφάλεια;