Σύνδεση με Sagem Fast 840 του Connex

[Tsili32]

Έσβησα το ένα αρχείο και μετονόμασα το άλλο με την βοήθεια του nautilus. H εντολή δίνει:

Κώδικας: Επιλογή όλων

kostas@kostas:~$ ls -al /lib/firmware/ueagle-atm/
total 3156
drwxr-xr-x 2 root root 4096 2010-01-09 19:43 .
drwxr-xr-x 6 root root 4096 2010-01-06 21:37 ..
-rw-r--r-- 1 kostas users 22395 2008-08-08 20:36 930-fpga.bin
-rw-r--r-- 1 kostas users 7759 2008-08-08 20:36 adi930.fw
-rwxrwxrwx 1 root root 153 2010-01-09 10:24 CMV4i.bin.v2
-rw-r--r-- 1 kostas users 137 2008-08-08 20:36 CMV4p.bin.v2
-rw-r--r-- 1 kostas users 71 2008-08-08 20:36 CMV9i.bin
-rw-r--r-- 1 kostas users 61 2008-08-08 20:36 CMV9p.bin
-rw-r--r-- 1 kostas users 161 2008-08-08 20:36 CMVei.bin
-rw-r--r-- 1 kostas users 161 2008-08-08 20:36 CMVeiWO.bin
-rw-r--r-- 1 kostas users 297 2008-08-08 19:36 CMVep_ANSI.bin
-rw-r--r-- 1 kostas users 161 2008-08-08 20:36 CMVep.bin
-rw-r--r-- 1 kostas users 151 2008-08-08 20:36 CMVepES03.bin
-rw-r--r-- 1 kostas users 151 2008-08-08 20:36 CMVepES.bin
-rw-r--r-- 1 kostas users 151 2008-08-08 20:36 CMVepFR04.bin
-rw-r--r-- 1 kostas users 181 2008-08-08 20:36 CMVepFR10.bin
-rw-r--r-- 1 kostas users 151 2008-08-08 20:36 CMVepFR.bin
-rw-r--r-- 1 kostas users 297 2008-08-08 19:38 CMVep_G.DMT.bin
-rw-r--r-- 1 kostas users 297 2008-08-08 19:39 CMVep_G.LITE.bin
-rw-r--r-- 1 kostas users 161 2008-08-08 20:36 CMVepIT.bin
-rw-r--r-- 1 kostas users 297 2008-08-08 19:37 CMVep_MULTI.bin
-rw-r--r-- 1 kostas users 151 2008-08-08 20:36 CMVepWO.bin
-rw-r--r-- 1 root root 456920 2010-01-08 16:24 DSP4i.bin
-rwxr-xr-x 1 kostas users 456436 2008-08-08 20:36 DSP4p.bin
-rw-r--r-- 1 kostas users 339717 2008-08-08 20:36 DSP9i.bin
-rw-r--r-- 1 kostas users 436947 2008-08-08 20:36 DSP9p.bin
-rw-r--r-- 1 kostas users 447099 2008-08-08 20:36 DSPei.bin
-rw-r--r-- 1 kostas users 427697 2008-08-08 20:36 DSPep.bin
-rwx------ 1 kostas users 456436 2008-08-08 20:36 e4_dsp_pots.bin
-rw-r--r-- 1 kostas users 10981 2008-08-08 20:36 eagleI.fw
-rw-r--r-- 1 kostas users 10875 2008-08-08 20:36 eagleII.fw
-rw-r--r-- 1 kostas users 10975 2008-08-08 20:36 eagleIII.fw
-rw-r--r-- 1 kostas users 10492 2008-08-08 20:36 eagleIV.fw
-rw-r--r-- 1 kostas users 2091 2008-08-08 20:36 Ikanos_license.txt

[logari81]

Δουλευει τώρα το modem;
Αν οχι δώσε μας τι λεει το

Κώδικας: Επιλογή όλων

dmesg

[Tsili32]

To modem τώρα βγάζει το εξής μήνυμα όταν πάω να συνδεθώ: "Cannot establish connection. The modem has already been restarted but it still hangs up..." H dmesg δίνει:

Κώδικας: Επιλογή όλων

[ 0.001182] Mount-cache hash table entries: 512
[ 0.001405] Initializing cgroup subsys ns
[ 0.001415] Initializing cgroup subsys cpuacct
[ 0.001420] Initializing cgroup subsys memory
[ 0.001430] Initializing cgroup subsys freezer
[ 0.001433] Initializing cgroup subsys net_cls
[ 0.001459] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.001462] CPU: L2 cache: 1024K
[ 0.001466] CPU: Physical Processor ID: 0
[ 0.001468] CPU: Processor Core ID: 0
[ 0.001474] mce: CPU supports 4 MCE banks
[ 0.001490] CPU0: Thermal monitoring enabled (TM1)
[ 0.001497] using mwait in idle threads.
[ 0.001508] Performance Counters: no PMU driver, software counters only.
[ 0.001517] Checking 'hlt' instruction... OK.
[ 0.019744] ACPI: Core revision 20090521
[ 0.029565] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069261] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5999.72 BogoMIPS (lpj=11999455)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM1)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.156959] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 0.156984] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160043] Brought up 2 CPUs
[ 0.160049] Total of 2 processors activated (11999.77 BogoMIPS).
[ 0.160100] CPU0 attaching sched-domain:
[ 0.160105] domain 0: span 0-1 level SIBLING
[ 0.160109] groups: 0 1
[ 0.160117] CPU1 attaching sched-domain:
[ 0.160121] domain 0: span 0-1 level SIBLING
[ 0.160125] groups: 1 0
[ 0.160240] Booting paravirtualized kernel on bare hardware
[ 0.160303] regulator: core version 0.5
[ 0.160303] Time: 13:33:47 Date: 01/11/10
[ 0.160303] NET: Registered protocol family 16
[ 0.160303] EISA bus registered
[ 0.160305] ACPI: bus type pci registered
[ 0.160443] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.160446] PCI: Using configuration type 1 for base access
[ 0.161854] bio: create slab <bio-0> at 0
[ 0.164636] ACPI: EC: Look up EC in DSDT
[ 0.172923] ACPI: Interpreter enabled
[ 0.172931] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.172966] ACPI: Using IOAPIC for interrupt routing
[ 0.180785] ACPI Warning: Incorrect checksum in table [OEMB] - ED, should be DE 20090521 tbutils-246
[ 0.180911] ACPI: No dock devices found.
[ 0.181063] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.181115] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.181128] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.181234] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 0.181337] pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f]
[ 0.181398] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
[ 0.181457] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[ 0.181517] pci 0000:00:1d.3: reg 20 io port: [0xec00-0xec1f]
[ 0.181585] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff27fc00-0xff27ffff]
[ 0.181649] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.181655] pci 0000:00:1d.7: PME# disabled
[ 0.181754] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.181762] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.181767] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.181795] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.181803] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.181811] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.181819] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.181827] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.181835] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.181894] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.181944] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
[ 0.181952] pci 0000:00:1f.5: reg 14 io port: [0xdc00-0xdc3f]
[ 0.181960] pci 0000:00:1f.5: reg 18 32bit mmio: [0xff2ffc00-0xff2ffdff]
[ 0.181968] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xff2ff800-0xff2ff8ff]
[ 0.182001] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.182006] pci 0000:00:1f.5: PME# disabled
[ 0.182056] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
[ 0.182064] pci 0000:01:00.0: reg 14 io port: [0xa800-0xa8ff]
[ 0.182071] pci 0000:01:00.0: reg 18 32bit mmio: [0xff0f0000-0xff0fffff]
[ 0.182090] pci 0000:01:00.0: reg 30 32bit mmio: [0xff0c0000-0xff0dffff]
[ 0.182113] pci 0000:01:00.0: supports D1 D2
[ 0.182157] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
[ 0.182162] pci 0000:00:01.0: bridge 32bit mmio: [0xff000000-0xff0fffff]
[ 0.182167] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xf7efffff]
[ 0.182212] pci 0000:02:05.0: reg 10 io port: [0x800b800-0x800b8ff]
[ 0.182221] pci 0000:02:05.0: reg 14 32bit mmio: [0xff1ffc00-0xff1ffcff]
[ 0.182264] pci 0000:02:05.0: supports D1 D2
[ 0.182267] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182272] pci 0000:02:05.0: PME# disabled
[ 0.182313] pci 0000:00:1e.0: transparent bridge
[ 0.182318] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.182324] pci 0000:00:1e.0: bridge 32bit mmio: [0xff100000-0xff1fffff]
[ 0.182340] pci_bus 0000:00: on NUMA node 0
[ 0.182346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.182451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.184875] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.185010] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.185148] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.185281] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.185415] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.185550] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.185685] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.185819] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.186081] SCSI subsystem initialized
[ 0.186129] libata version 3.00 loaded.
[ 0.186129] usbcore: registered new interface driver usbfs
[ 0.186129] usbcore: registered new interface driver hub
[ 0.186129] usbcore: registered new device driver usb
[ 0.186129] ACPI: WMI: Mapper loaded
[ 0.186129] PCI: Using ACPI for IRQ routing
[ 0.186129] pci 0000:02:05.0: BAR 0: no parent found for of device [0x800b800-0x800b8ff]
[ 0.186129] pci 0000:02:05.0: BAR 0: can't allocate resource
[ 0.196014] Bluetooth: Core ver 2.15
[ 0.196041] NET: Registered protocol family 31
[ 0.196041] Bluetooth: HCI device and connection manager initialized
[ 0.196041] Bluetooth: HCI socket layer initialized
[ 0.196041] NetLabel: Initializing
[ 0.196041] NetLabel: domain hash size = 128
[ 0.196041] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.196053] NetLabel: unlabeled traffic allowed by default
[ 0.196176] hpet clockevent registered
[ 0.196180] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.196186] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.196194] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.212017] pnp: PnP ACPI init
[ 0.212054] ACPI: bus type pnp registered
[ 0.215708] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215714] pnp 00:08: io resource (0x22-0x3f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215718] pnp 00:08: io resource (0x44-0x5f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215722] pnp 00:08: io resource (0x62-0x63) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215726] pnp 00:08: io resource (0x65-0x6f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215730] pnp 00:08: io resource (0x72-0x7f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215734] pnp 00:08: io resource (0x80-0x80) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215738] pnp 00:08: io resource (0x84-0x86) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215741] pnp 00:08: io resource (0x88-0x88) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215745] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215749] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215753] pnp 00:08: io resource (0xa2-0xbf) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215757] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.218534] pnp: PnP ACPI: found 14 devices
[ 0.218538] ACPI: ACPI bus type pnp unregistered
[ 0.218544] PnPBIOS: Disabled by ACPI PNP
[ 0.218565] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.218569] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.218573] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.218578] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.218582] system 00:08: iomem range 0xff380000-0xffefffff has been reserved
[ 0.218590] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.218594] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.218603] system 00:0c: ioport range 0x680-0x6ff has been reserved
[ 0.218607] system 00:0c: ioport range 0x295-0x296 has been reserved
[ 0.218615] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.218619] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[ 0.218623] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.218627] system 00:0d: iomem range 0x100000-0x4fffffff could not be reserved
[ 0.218631] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.253359] AppArmor: AppArmor Filesystem Enabled
[ 0.253399] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.253404] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.253410] pci 0000:00:01.0: MEM window: 0xff000000-0xff0fffff
[ 0.253415] pci 0000:00:01.0: PREFETCH window: 0xd7f00000-0xf7efffff
[ 0.253424] pci 0000:02:05.0: BAR 0: error updating (0x00b001 != 0x800b001)
[ 0.253428] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.253432] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.253438] pci 0000:00:1e.0: MEM window: 0xff100000-0xff1fffff
[ 0.253443] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.253462] pci 0000:00:1e.0: setting latency timer to 64
[ 0.253468] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.253472] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.253476] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.253479] pci_bus 0000:01: resource 1 mem: [0xff000000-0xff0fffff]
[ 0.253482] pci_bus 0000:01: resource 2 pref mem [0xd7f00000-0xf7efffff]
[ 0.253486] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.253489] pci_bus 0000:02: resource 1 mem: [0xff100000-0xff1fffff]
[ 0.253492] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.253496] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.253551] NET: Registered protocol family 2
[ 0.253707] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.254266] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.255160] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.255822] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.255826] TCP reno registered
[ 0.256079] NET: Registered protocol family 1
[ 0.256194] Trying to unpack rootfs image as initramfs...
[ 0.500085] Freeing initrd memory: 7469k freed
[ 0.510822] cpufreq-nforce2: No nForce2 chipset.
[ 0.510864] Scanning for low memory corruption every 60 seconds
[ 0.511026] audit: initializing netlink socket (disabled)
[ 0.511058] type=2000 audit(1263216827.507:1): initialized
[ 0.520277] highmem bounce pool size: 64 pages
[ 0.520286] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.522195] VFS: Disk quotas dquot_6.5.2
[ 0.522278] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.523037] fuse init (API version 7.12)
[ 0.523150] msgmni has been set to 1725
[ 0.523465] alg: No test for stdrng (krng)
[ 0.523487] io scheduler noop registered
[ 0.523491] io scheduler anticipatory registered
[ 0.523494] io scheduler deadline registered
[ 0.523552] io scheduler cfq registered (default)
[ 0.523661] pci 0000:01:00.0: Boot video device
[ 0.523788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.523822] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.524011] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.524017] ACPI: Power Button [PWRF]
[ 0.524094] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.524098] ACPI: Power Button [PWRB]
[ 0.524610] processor LNXCPU:00: registered as cooling_device0
[ 0.524616] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.524782] processor LNXCPU:01: registered as cooling_device1
[ 0.527818] isapnp: Scanning for PnP cards...
[ 0.696994] Switched to high resolution mode on CPU 1
[ 0.699967] Switched to high resolution mode on CPU 0
[ 0.881530] isapnp: No Plug & Play device found
[ 0.883089] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.883209] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.883305] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.883754] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.885162] brd: module loaded
[ 0.885777] loop: module loaded
[ 0.885886] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.886033] ata_piix 0000:00:1f.1: version 2.13
[ 0.886057] alloc irq_desc for 18 on node -1
[ 0.886060] alloc kstat_irqs on node -1
[ 0.886071] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.886139] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.886261] scsi0 : ata_piix
[ 0.886398] scsi1 : ata_piix
[ 0.888486] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.888491] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.889663] Fixed MDIO Bus: probed
[ 0.889713] PPP generic driver version 2.4.2
[ 0.889847] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.889874] alloc irq_desc for 23 on node -1
[ 0.889877] alloc kstat_irqs on node -1
[ 0.889885] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.889905] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.889911] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.889977] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.893903] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.893912] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.893930] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff27fc00
[ 0.908513] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.908621] usb usb1: configuration #1 chosen from 1 choice
[ 0.908663] hub 1-0:1.0: USB hub found
[ 0.908680] hub 1-0:1.0: 8 ports detected
[ 0.908772] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.908800] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.908840] alloc irq_desc for 16 on node -1
[ 0.908843] alloc kstat_irqs on node -1
[ 0.908850] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.908859] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.908864] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.908906] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.908939] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
[ 0.909040] usb usb2: configuration #1 chosen from 1 choice
[ 0.909078] hub 2-0:1.0: USB hub found
[ 0.909088] hub 2-0:1.0: 2 ports detected
[ 0.909165] alloc irq_desc for 19 on node -1
[ 0.909168] alloc kstat_irqs on node -1
[ 0.909174] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.909183] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.909187] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.909231] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.909261] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 0.909360] usb usb3: configuration #1 chosen from 1 choice
[ 0.909397] hub 3-0:1.0: USB hub found
[ 0.909409] hub 3-0:1.0: 2 ports detected
[ 0.909473] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.909481] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.909485] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.909526] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.909556] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 0.909664] usb usb4: configuration #1 chosen from 1 choice
[ 0.909705] hub 4-0:1.0: USB hub found
[ 0.909715] hub 4-0:1.0: 2 ports detected
[ 0.909772] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.909780] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.909784] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.909825] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.909847] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 0.909952] usb usb5: configuration #1 chosen from 1 choice
[ 0.909995] hub 5-0:1.0: USB hub found
[ 0.910005] hub 5-0:1.0: 2 ports detected
[ 0.910136] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.910140] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.910536] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.910623] mice: PS/2 mouse device common for all mice
[ 0.910748] rtc_cmos 00:02: RTC can wake from S4
[ 0.910795] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.910821] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.910971] device-mapper: uevent: version 1.0.3
[ 0.911138] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.911260] device-mapper: multipath: version 1.1.0 loaded
[ 0.911266] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.911428] EISA: Probing bus 0 at eisa.0
[ 0.911467] EISA: Detected 0 cards.
[ 0.911605] cpuidle: using governor ladder
[ 0.911610] cpuidle: using governor menu
[ 0.912336] TCP cubic registered
[ 0.912516] NET: Registered protocol family 10
[ 0.913198] lo: Disabled Privacy Extensions
[ 0.913684] NET: Registered protocol family 17
[ 0.913712] Bluetooth: L2CAP ver 2.13
[ 0.913715] Bluetooth: L2CAP socket layer initialized
[ 0.913718] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.913720] Bluetooth: SCO socket layer initialized
[ 0.913771] Bluetooth: RFCOMM TTY layer initialized
[ 0.913777] Bluetooth: RFCOMM socket layer initialized
[ 0.913781] Bluetooth: RFCOMM ver 1.11
[ 0.913833] Using IPI No-Shortcut mode
[ 0.913920] PM: Resume from disk failed.
[ 0.913951] registered taskstats version 1
[ 0.914085] Magic number: 10:202:584
[ 0.914175] rtc_cmos 00:02: setting system clock to 2010-01-11 13:33:48 UTC (1263216828)
[ 0.914179] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.914182] EDD information not available.
[ 0.937702] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.060301] ata2.00: ATAPI: _NEC DVD_RW ND-3500AG, 2.18, max UDMA/33
[ 1.076202] ata2.00: configured for UDMA/33
[ 1.116269] ata1.00: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 1.116275] ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100
[ 1.116279] ata1.00: 156301488 sectors, multi 16: LBA48
[ 1.132361] ata1.00: configured for UDMA/100
[ 1.132521] scsi 0:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
[ 1.132725] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.132763] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.132907] sd 0:0:0:0: [sda] Write Protect is off
[ 1.132912] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.132948] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.133162] sda:
[ 1.133683] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.18 PQ: 0 ANSI: 5
[ 1.135890] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.135895] Uniform CD-ROM driver Revision: 3.20
[ 1.136020] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.136079] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.145870] sda1 sda2 < sda5 sda6 sda7 >
[ 1.175843] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.175868] Freeing unused kernel memory: 540k freed
[ 1.176594] Write protecting the kernel text: 4568k
[ 1.176652] Write protecting the kernel read-only data: 1836k
[ 1.349169] Linux agpgart interface v0.103
[ 1.399679] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 1.404767] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 1.540421] [drm] Initialized drm 1.1.0 20060810
[ 1.575372] [drm] radeon default to kernel modesetting DISABLED.
[ 1.575622] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.576322] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 1.579793] Floppy drive(s): fd0 is 1.44M
[ 1.599798] FDC 0 is a post-1991 82077
[ 1.748521] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 1.934164] usb 2-1: configuration #1 chosen from 1 choice
[ 2.180519] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 2.363031] usb 3-2: configuration #1 chosen from 1 choice
[ 2.400090] usbcore: registered new interface driver hiddev
[ 2.415356] input: Microsoft Microsoft IntelliMouse® Optical as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 2.415515] generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:1d.1-2/input0
[ 2.415544] usbcore: registered new interface driver usbhid
[ 2.415550] usbhid: v2.6:USB HID core driver
[ 2.620514] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 3.038641] PM: Starting manual resume from disk
[ 3.038647] PM: Resume from partition 8:5
[ 3.038649] PM: Checking hibernation image.
[ 3.038840] PM: Resume from disk failed.
[ 3.066289] kjournald starting. Commit interval 5 seconds
[ 3.066305] EXT3-fs: mounted filesystem with writeback data mode.
[ 3.569983] usb 4-1: configuration #1 chosen from 1 choice
[ 3.786213] type=1505 audit(1263216831.369:2): operation="profile_load" pid=398 name=/usr/share/gdm/guest-session/Xsession
[ 3.806370] type=1505 audit(1263216831.390:3): operation="profile_load" pid=399 name=/sbin/dhclient3
[ 3.807109] type=1505 audit(1263216831.390:4): operation="profile_load" pid=399 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.807510] type=1505 audit(1263216831.390:5): operation="profile_load" pid=399 name=/usr/lib/connman/scripts/dhclient-script
[ 3.812025] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 3.846412] type=1505 audit(1263216831.429:6): operation="profile_load" pid=400 name=/usr/bin/evince
[ 3.858337] type=1505 audit(1263216831.441:7): operation="profile_load" pid=400 name=/usr/bin/evince-previewer
[ 3.865369] type=1505 audit(1263216831.449:8): operation="profile_load" pid=400 name=/usr/bin/evince-thumbnailer
[ 3.886106] type=1505 audit(1263216831.469:9): operation="profile_load" pid=402 name=/usr/lib/cups/backend/cups-pdf
[ 3.886971] type=1505 audit(1263216831.469:10): operation="profile_load" pid=402 name=/usr/sbin/cupsd
[ 4.012852] usb 4-2: configuration #1 chosen from 1 choice
[ 4.934530] Adding 1052216k swap on /dev/sda5. Priority:-1 extents:1 across:1052216k
[ 5.236934] EXT3 FS on sda6, internal journal
[ 5.371687] udev: starting version 147
[ 11.294675] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.330138] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6204
[ 11.330199] usbcore: registered new interface driver usblp
[ 11.346240] intel_rng: FWH not detected
[ 11.588326] __ratelimit: 3 callbacks suppressed
[ 11.588331] type=1505 audit(1263209639.173:12): operation="profile_replace" pid=906 name=/usr/share/gdm/guest-session/Xsession
[ 11.591046] type=1505 audit(1263209639.173:13): operation="profile_replace" pid=907 name=/sbin/dhclient3
[ 11.591787] type=1505 audit(1263209639.173:14): operation="profile_replace" pid=907 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 11.592228] type=1505 audit(1263209639.177:15): operation="profile_replace" pid=907 name=/usr/lib/connman/scripts/dhclient-script
[ 11.599855] type=1505 audit(1263209639.181:16): operation="profile_replace" pid=908 name=/usr/bin/evince
[ 11.612332] type=1505 audit(1263209639.197:17): operation="profile_replace" pid=908 name=/usr/bin/evince-previewer
[ 11.619512] type=1505 audit(1263209639.201:18): operation="profile_replace" pid=908 name=/usr/bin/evince-thumbnailer
[ 11.631053] type=1505 audit(1263209639.213:19): operation="profile_replace" pid=910 name=/usr/lib/cups/backend/cups-pdf
[ 11.631919] type=1505 audit(1263209639.213:20): operation="profile_replace" pid=910 name=/usr/sbin/cupsd
[ 11.635835] type=1505 audit(1263209639.217:21): operation="profile_replace" pid=911 name=/usr/sbin/tcpdump
[ 12.188469] NET: Registered protocol family 8
[ 12.188477] NET: Registered protocol family 20
[ 12.192703] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.203238] lp: driver loaded but no devices found
[ 12.225304] parport_pc 00:07: reported by Plug and Play ACPI
[ 12.225422] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 12.257660] ppdev: user-space parallel port driver
[ 12.323798] lp0: using parport0 (interrupt-driven).
[ 12.434920] [ueagle-atm] driver ueagle 1.4 loaded
[ 12.434988] usb 4-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9041) Rev (0X30A9): Eagle IV
[ 12.544561] usb 4-1: reset full speed USB device using uhci_hcd and address 2
[ 12.707233] usb 4-1: [ueagle-atm] using iso mode
[ 12.707945] usb 4-1: [ueagle-atm] (re)booting started
[ 12.710342] usbcore: registered new interface driver ueagle-atm
[ 13.049712] usbcore: registered new interface driver snd-usb-audio
[ 13.056464] alloc irq_desc for 17 on node -1
[ 13.056471] alloc kstat_irqs on node -1
[ 13.056487] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 13.056553] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 13.380019] intel8x0_measure_ac97_clock: measured 55727 usecs (2685 samples)
[ 13.380024] intel8x0: clocking to 48000
[ 13.840028] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 14.427694] usb 4-1: [ueagle-atm] ATU-R firmware version : d19050b
[ 14.427704] usb 4-1: firmware: requesting ueagle-atm/CMV4i.bin.v2
[ 14.617637] usb 4-1: [ueagle-atm] modem started, waiting synchronization...
[ 16.819495] usb 2-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 19.490451] CPU0 attaching NULL sched-domain.
[ 19.490460] CPU1 attaching NULL sched-domain.
[ 19.500077] CPU0 attaching sched-domain:
[ 19.500082] domain 0: span 0-1 level SIBLING
[ 19.500086] groups: 0 1
[ 19.500092] domain 1: span 0-1 level MC
[ 19.500096] groups: 0-1 (__cpu_power = 2048)
[ 19.500103] CPU1 attaching sched-domain:
[ 19.500106] domain 0: span 0-1 level SIBLING
[ 19.500109] groups: 1 0
[ 19.500114] domain 1: span 0-1 level MC
[ 19.500118] groups: 0-1 (__cpu_power = 2048)
[ 21.811969] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 21.811990] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 21.812048] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 21.812868] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 22.083576] [drm] Setting GART location based on new memory map
[ 22.083587] [drm] Loading R200 Microcode
[ 22.083628] [drm] writeback test succeeded in 1 usecs
[ 24.205862] CPU0 attaching NULL sched-domain.
[ 24.205873] CPU1 attaching NULL sched-domain.
[ 24.224612] CPU0 attaching sched-domain:
[ 24.224621] domain 0: span 0-1 level SIBLING
[ 24.224627] groups: 0 1
[ 24.224639] CPU1 attaching sched-domain:
[ 24.224644] domain 0: span 0-1 level SIBLING
[ 24.224650] groups: 1 0
[ 29.644292] usb 4-1: [ueagle-atm] modem operational
[ 33.230261] PPP BSD Compression module registered
[ 33.287537] PPP Deflate Compression module registered
[ 36.772650] glxinfo:1675 freeing invalid memtype f8102000-f8112000
[ 36.772664] glxinfo:1675 freeing invalid memtype f8112000-f8122000
[ 36.772676] glxinfo:1675 freeing invalid memtype f8122000-f8132000
[ 36.772687] glxinfo:1675 freeing invalid memtype f8132000-f8142000
[ 36.772697] glxinfo:1675 freeing invalid memtype f8142000-f8152000
[ 36.772708] glxinfo:1675 freeing invalid memtype f8152000-f8162000
[ 36.772719] glxinfo:1675 freeing invalid memtype f8162000-f8172000
[ 36.772730] glxinfo:1675 freeing invalid memtype f8172000-f8182000
[ 36.772741] glxinfo:1675 freeing invalid memtype f8182000-f8192000
[ 36.772751] glxinfo:1675 freeing invalid memtype f8192000-f81a2000
[ 36.772762] glxinfo:1675 freeing invalid memtype f81a2000-f81b2000
[ 36.772773] glxinfo:1675 freeing invalid memtype f81b2000-f81c2000
[ 36.772784] glxinfo:1675 freeing invalid memtype f81c2000-f81d2000
[ 36.772795] glxinfo:1675 freeing invalid memtype f81d2000-f81e2000
[ 36.772806] glxinfo:1675 freeing invalid memtype f81e2000-f81f2000
[ 36.772816] glxinfo:1675 freeing invalid memtype f81f2000-f8202000
[ 36.772827] glxinfo:1675 freeing invalid memtype f8202000-f8212000
[ 36.772838] glxinfo:1675 freeing invalid memtype f8212000-f8222000
[ 36.772849] glxinfo:1675 freeing invalid memtype f8222000-f8232000
[ 36.772860] glxinfo:1675 freeing invalid memtype f8232000-f8242000
[ 36.772870] glxinfo:1675 freeing invalid memtype f8242000-f8252000
[ 36.772881] glxinfo:1675 freeing invalid memtype f8252000-f8262000
[ 36.772892] glxinfo:1675 freeing invalid memtype f8262000-f8272000
[ 36.772903] glxinfo:1675 freeing invalid memtype f8272000-f8282000
[ 36.772914] glxinfo:1675 freeing invalid memtype f8282000-f8292000
[ 36.772925] glxinfo:1675 freeing invalid memtype f8292000-f82a2000
[ 36.772935] glxinfo:1675 freeing invalid memtype f82a2000-f82b2000
[ 36.772946] glxinfo:1675 freeing invalid memtype f82b2000-f82c2000
[ 36.772957] glxinfo:1675 freeing invalid memtype f82c2000-f82d2000
[ 36.772968] glxinfo:1675 freeing invalid memtype f82d2000-f82e2000
[ 36.772979] glxinfo:1675 freeing invalid memtype f82e2000-f82f2000
[ 36.772988] glxinfo:1675 freeing invalid memtype f82f2000-f8302000
[ 56.530759] usbcore: deregistering interface driver ueagle-atm
[ 56.531490] usb 4-1: [UEAGLE-ATM] uea_intr() failed with -108
[ 56.533489] ATM dev 0: usbatm_complete: urb 0xf6156840 failed (-2)!
[ 56.534486] ATM dev 0: usbatm_complete: urb 0xf6156900 failed (-2)!
[ 56.535485] ATM dev 0: usbatm_complete: urb 0xf61569c0 failed (-2)!
[ 56.536484] ATM dev 0: usbatm_complete: urb 0xf6156a80 failed (-2)!
[ 56.538619] usb 4-1: [ueagle-atm] ADSL device removed
[ 56.541617] [ueagle-atm] driver unloaded
[ 58.551980] [ueagle-atm] driver ueagle 1.4 loaded
[ 58.552045] usb 4-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9041) Rev (0X30A9): Eagle IV
[ 58.664024] usb 4-1: reset full speed USB device using uhci_hcd and address 2
[ 58.820882] usb 4-1: [ueagle-atm] using iso mode
[ 58.828279] usb 4-1: [ueagle-atm] (re)booting started
[ 58.829924] usbcore: registered new interface driver ueagle-atm
[ 59.952031] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 60.175442] usb 4-1: [ueagle-atm] ATU-R firmware version : d19050b
[ 60.175452] usb 4-1: firmware: requesting ueagle-atm/CMV4i.bin.v2
[ 60.274414] usb 4-1: [ueagle-atm] modem started, waiting synchronization...
[ 81.291345] usb 4-1: [ueagle-atm] modem operational
kostas@kostas:~$

[logari81]

[ 56.530759] usbcore: deregistering interface driver ueagle-atm
[ 56.531490] usb 4-1: [UEAGLE-ATM] uea_intr() failed with -108
[ 56.533489] ATM dev 0: usbatm_complete: urb 0xf6156840 failed (-2)!
[ 56.534486] ATM dev 0: usbatm_complete: urb 0xf6156900 failed (-2)!
[ 56.535485] ATM dev 0: usbatm_complete: urb 0xf61569c0 failed (-2)!
[ 56.536484] ATM dev 0: usbatm_complete: urb 0xf6156a80 failed (-2)!
[ 56.538619] usb 4-1: [ueagle-atm] ADSL device removed

αυτο ειναι αρκετα παράξενο, σε τι θυρα το εχεις συνδεμενο το modem; Δοκιμασε να το συνδεσεις σε μια απο τις πίσω θύρες χωρις καμια επιπλέον προέκταση ή hub.

[Tsili32]

To modem είναι συνδεδεμένο σε θύρα usb στις πίσω θύρες του υπολογιστή χωρίς καμία επιπλέον προέκταση. Επίσης από το modem ξεκινάει και ακόμα ένα καλώδιο και καταλήγει σε splitter και από εκεί στην συσκευή ISDN του ΟΤΕ και σε μια τηλεφωνική συσκευή. Είναι από τα παλιά συστήματα.

[logari81]

τώρα ενώ φορτωνεται σωστα το firmware και ξεκιναει σωστα το modem, σε καποια φαση φαινεται να ξεσυνδεεται. Δοκιμασε σε καποια αλλη θυρα usb αν κανει το ιδιο.

[Tsili32]

Άλλαξα θύρα usb στο modem αλλά δυστηχώς δεν είχε αποτέλεσμα. Πάλι το ίδιο μήνυμα έβγαλε.

[logari81]

έδωσα την εντολή dmesg και έβγαλε αυτό

Κώδικας: Επιλογή όλων

[ 0.369506] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeaa0000-0xfeabffff]
[ 0.369541] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.369546] pci 0000:02:00.0: PME# disabled
[ 0.369593] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.369630] pci 0000:04:01.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.369637] pci 0000:04:01.0: reg 14 io port: [0xec00-0xec7f]
[ 0.369688] pci 0000:04:01.0: supports D2
[ 0.369690] pci 0000:04:01.0: PME# supported from D2 D3hot D3cold
[ 0.369694] pci 0000:04:01.0: PME# disabled
[ 0.369735] pci 0000:00:1e.0: transparent bridge
[ 0.369738] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.369742] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.369766] pci_bus 0000:00: on NUMA node 0
[ 0.369774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.369888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.369967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.370016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.376746] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.376838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.376929] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.377019] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.377109] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.377200] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.377290] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.377381] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.377528] SCSI subsystem initialized
[ 0.377550] libata version 3.00 loaded.
[ 0.377550] usbcore: registered new interface driver usbfs
[ 0.377550] usbcore: registered new interface driver hub
[ 0.377550] usbcore: registered new device driver usb
[ 0.377550] ACPI: WMI: Mapper loaded
[ 0.377550] PCI: Using ACPI for IRQ routing
[ 0.388009] Bluetooth: Core ver 2.15
[ 0.388027] NET: Registered protocol family 31
[ 0.388027] Bluetooth: HCI device and connection manager initialized
[ 0.388027] Bluetooth: HCI socket layer initialized
[ 0.388027] NetLabel: Initializing
[ 0.388027] NetLabel: domain hash size = 128
[ 0.388027] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.388041] NetLabel: unlabeled traffic allowed by default
[ 0.388078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.388085] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.408051] pnp: PnP ACPI init
[ 0.408061] ACPI: bus type pnp registered
[ 0.411618] pnp: PnP ACPI: found 19 devices
[ 0.411620] ACPI: ACPI bus type pnp unregistered
[ 0.411624] PnPBIOS: Disabled by ACPI PNP
[ 0.411634] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.411641] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.411646] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.411648] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.411650] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.411653] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.411656] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved

[logari81]

όχι δεν σου εβγαλε αυτα, σου έβγαλε πολύ περισσότερα. Μπορεις να επεξεργαστεις το προηγουμενο ποστ σου και να βαλεις ολόκληρο το αποτελεσμα μεσα σε

Κώδικας: Επιλογή όλων

[code][/code]

Τωρα πρόσεξα όμως ότι μετα απο αυτο θα πρεπει να κανεις και κατι ακομα. Αν εχεις καποια εναλλακτικη συνδεση, π.χ. με ethernet ή με ασυρματο εκτέλεσε το παρακάτω για να προσθεσεις το firmware που λείπει:
viewtopic.php?f=39&t=9494&start=10#p97548
Διαφορετικά δες τα υπόλοιπα μηνυματα του Tsili32 για να δεις πως το εκανε αυτος χωρίς σύνδεση ιντερνετ.

[jo451]

αυτό είναι ολόκληρο κάτι δεν πηγε καλά με την αντιγραφή πριν

Κώδικας: Επιλογή όλων

[ 0.369562] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.369567] pci 0000:02:00.0: PME# disabled
[ 0.369614] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.369651] pci 0000:04:01.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.369658] pci 0000:04:01.0: reg 14 io port: [0xec00-0xec7f]
[ 0.369707] pci 0000:04:01.0: supports D2
[ 0.369709] pci 0000:04:01.0: PME# supported from D2 D3hot D3cold
[ 0.369713] pci 0000:04:01.0: PME# disabled
[ 0.369755] pci 0000:00:1e.0: transparent bridge
[ 0.369758] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.369767] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.369791] pci_bus 0000:00: on NUMA node 0
[ 0.369794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.369910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.369989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.370038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.376769] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.376862] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.376953] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.377043] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.377132] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.377224] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.377314] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.377405] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.377553] SCSI subsystem initialized
[ 0.377573] libata version 3.00 loaded.
[ 0.377573] usbcore: registered new interface driver usbfs
[ 0.377573] usbcore: registered new interface driver hub
[ 0.377573] usbcore: registered new device driver usb
[ 0.377573] ACPI: WMI: Mapper loaded
[ 0.377573] PCI: Using ACPI for IRQ routing
[ 0.388009] Bluetooth: Core ver 2.15
[ 0.388026] NET: Registered protocol family 31
[ 0.388026] Bluetooth: HCI device and connection manager initialized
[ 0.388026] Bluetooth: HCI socket layer initialized
[ 0.388026] NetLabel: Initializing
[ 0.388026] NetLabel: domain hash size = 128
[ 0.388027] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.388041] NetLabel: unlabeled traffic allowed by default
[ 0.388078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.388084] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.408051] pnp: PnP ACPI init
[ 0.408061] ACPI: bus type pnp registered
[ 0.411625] pnp: PnP ACPI: found 19 devices
[ 0.411627] ACPI: ACPI bus type pnp unregistered
[ 0.411631] PnPBIOS: Disabled by ACPI PNP
[ 0.411641] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.411648] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.411652] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.411655] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.411657] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.411660] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.411662] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.411667] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.411672] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.411675] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.411682] system 00:11: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.411687] system 00:12: iomem range 0x0-0x9ffff could not be reserved
[ 0.411689] system 00:12: iomem range 0xc0000-0xcffff could not be reserved
[ 0.411692] system 00:12: iomem range 0xe0000-0xfffff could not be reserved
[ 0.411694] system 00:12: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.446312] AppArmor: AppArmor Filesystem Enabled
[ 0.446346] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.446349] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.446353] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe9fffff
[ 0.446356] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.446360] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.446361] pci 0000:00:1c.0: IO window: disabled
[ 0.446365] pci 0000:00:1c.0: MEM window: disabled
[ 0.446368] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.446372] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.446374] pci 0000:00:1c.1: IO window: disabled
[ 0.446378] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff
[ 0.446381] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.446385] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.446387] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.446392] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.446395] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.446403] alloc irq_desc for 16 on node -1
[ 0.446405] alloc kstat_irqs on node -1
[ 0.446410] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.446413] pci 0000:00:01.0: setting latency timer to 64
[ 0.446419] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.446422] pci 0000:00:1c.0: setting latency timer to 64
[ 0.446428] alloc irq_desc for 17 on node -1
[ 0.446429] alloc kstat_irqs on node -1
[ 0.446432] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.446436] pci 0000:00:1c.1: setting latency timer to 64
[ 0.446441] pci 0000:00:1e.0: setting latency timer to 64
[ 0.446444] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.446447] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.446449] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.446451] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe9fffff]
[ 0.446453] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.446455] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.446457] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.446459] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.446461] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.446463] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.446489] NET: Registered protocol family 2
[ 0.446566] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.446804] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.447157] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.447339] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.447342] TCP reno registered
[ 0.447396] NET: Registered protocol family 1
[ 0.447442] Trying to unpack rootfs image as initramfs...
[ 0.501600] Switched to high resolution mode on CPU 1
[ 0.502206] Switched to high resolution mode on CPU 3
[ 0.502304] Switched to high resolution mode on CPU 2
[ 0.504052] Switched to high resolution mode on CPU 0
[ 0.604451] Freeing initrd memory: 7469k freed
[ 0.607639] cpufreq-nforce2: No nForce2 chipset.
[ 0.607665] Scanning for low memory corruption every 60 seconds
[ 0.607759] audit: initializing netlink socket (disabled)
[ 0.607775] type=2000 audit(1265631019.604:1): initialized
[ 0.615042] highmem bounce pool size: 64 pages
[ 0.615047] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.616339] VFS: Disk quotas dquot_6.5.2
[ 0.616398] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.616883] fuse init (API version 7.12)
[ 0.616964] msgmni has been set to 1679
[ 0.617265] alg: No test for stdrng (krng)
[ 0.617274] io scheduler noop registered
[ 0.617276] io scheduler anticipatory registered
[ 0.617278] io scheduler deadline registered
[ 0.617314] io scheduler cfq registered (default)
[ 0.617411] pci 0000:01:00.0: Boot video device
[ 0.617502] alloc irq_desc for 24 on node -1
[ 0.617504] alloc kstat_irqs on node -1
[ 0.617512] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.617517] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.617610] alloc irq_desc for 25 on node -1
[ 0.617612] alloc kstat_irqs on node -1
[ 0.617618] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.617624] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.617724] alloc irq_desc for 26 on node -1
[ 0.617726] alloc kstat_irqs on node -1
[ 0.617732] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.617739] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.617813] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.617882] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.617998] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.618001] ACPI: Power Button [PWRF]
[ 0.618051] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.618053] ACPI: Power Button [PWRB]
[ 0.618532] ACPI: SSDT bffb00f0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.618765] processor LNXCPU:00: registered as cooling_device0
[ 0.619015] ACPI: SSDT bffb02d0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.619232] processor LNXCPU:01: registered as cooling_device1
[ 0.619480] ACPI: SSDT bffb0420 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
[ 0.619708] processor LNXCPU:02: registered as cooling_device2
[ 0.619958] ACPI: SSDT bffb0570 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
[ 0.620211] processor LNXCPU:03: registered as cooling_device3
[ 0.622200] isapnp: Scanning for PnP cards...
[ 0.975063] isapnp: No Plug & Play device found
[ 0.975989] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.976090] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.976524] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.977359] brd: module loaded
[ 0.977734] loop: module loaded
[ 0.977787] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.977868] ata_piix 0000:00:1f.1: version 2.13
[ 0.977878] alloc irq_desc for 18 on node -1
[ 0.977880] alloc kstat_irqs on node -1
[ 0.977884] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.977917] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.978013] scsi0 : ata_piix
[ 0.978097] scsi1 : ata_piix
[ 0.979195] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.979198] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.979224] alloc irq_desc for 19 on node -1
[ 0.979226] alloc kstat_irqs on node -1
[ 0.979231] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.979237] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.979277] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.979323] scsi2 : ata_piix
[ 0.979380] scsi3 : ata_piix
[ 0.980737] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.980740] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.981444] Fixed MDIO Bus: probed
[ 0.981471] PPP generic driver version 2.4.2
[ 0.981537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.981551] alloc irq_desc for 23 on node -1
[ 0.981553] alloc kstat_irqs on node -1
[ 0.981557] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.981565] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.981568] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.981620] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.985537] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.985542] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.985553] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[ 1.000043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.000130] usb usb1: configuration #1 chosen from 1 choice
[ 1.000166] hub 1-0:1.0: USB hub found
[ 1.000176] hub 1-0:1.0: 8 ports detected
[ 1.000228] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.000240] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.000259] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.000264] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.000267] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.000290] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.000310] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 1.000369] usb usb2: configuration #1 chosen from 1 choice
[ 1.000390] hub 2-0:1.0: USB hub found
[ 1.000395] hub 2-0:1.0: 2 ports detected
[ 1.000433] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.000438] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.000441] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.000463] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.000483] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 1.000544] usb usb3: configuration #1 chosen from 1 choice
[ 1.000565] hub 3-0:1.0: USB hub found
[ 1.000570] hub 3-0:1.0: 2 ports detected
[ 1.000608] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.000613] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.000616] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.000640] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.000666] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 1.000725] usb usb4: configuration #1 chosen from 1 choice
[ 1.000746] hub 4-0:1.0: USB hub found
[ 1.000751] hub 4-0:1.0: 2 ports detected
[ 1.000788] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.000793] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.000796] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.000823] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.000849] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 1.000906] usb usb5: configuration #1 chosen from 1 choice
[ 1.000929] hub 5-0:1.0: USB hub found
[ 1.000934] hub 5-0:1.0: 2 ports detected
[ 1.001020] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.003298] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.003307] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.003359] mice: PS/2 mouse device common for all mice
[ 1.003433] rtc_cmos 00:03: RTC can wake from S4
[ 1.003458] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.003479] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.003561] device-mapper: uevent: version 1.0.3
[ 1.003659] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.003806] device-mapper: multipath: version 1.1.0 loaded
[ 1.003809] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.003940] EISA: Probing bus 0 at eisa.0
[ 1.003963] EISA: Detected 0 cards.
[ 1.004203] cpuidle: using governor ladder
[ 1.004204] cpuidle: using governor menu
[ 1.004617] TCP cubic registered
[ 1.004744] NET: Registered protocol family 10
[ 1.005110] lo: Disabled Privacy Extensions
[ 1.005379] NET: Registered protocol family 17
[ 1.005393] Bluetooth: L2CAP ver 2.13
[ 1.005394] Bluetooth: L2CAP socket layer initialized
[ 1.005396] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.005398] Bluetooth: SCO socket layer initialized
[ 1.005442] Bluetooth: RFCOMM TTY layer initialized
[ 1.005445] Bluetooth: RFCOMM socket layer initialized
[ 1.005448] Bluetooth: RFCOMM ver 1.11
[ 1.006095] Using IPI No-Shortcut mode
[ 1.006147] PM: Resume from disk failed.
[ 1.006157] registered taskstats version 1
[ 1.006243] Magic number: 14:462:177
[ 1.006266] acpi device:0d: hash matches
[ 1.006309] rtc_cmos 00:03: setting system clock to 2010-02-08 12:10:21 UTC (1265631021)
[ 1.006311] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.006313] EDD information not available.
[ 1.021123] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.143160] ata1.00: ATAPI: TSSTcorpDVD-ROM SH-D162D, SB00, max UDMA/33
[ 1.156204] ata1.00: configured for UDMA/33
[ 1.172545] scsi 0:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D162D SB00 PQ: 0 ANSI: 5
[ 1.187745] ata4.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133
[ 1.187749] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.187993] ata4.01: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 1.187996] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.189405] ata3.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133
[ 1.189409] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.189455] ata3.01: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100
[ 1.229124] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.229127] Uniform CD-ROM driver Revision: 3.20
[ 1.229218] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.229261] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.254414] ata4.00: configured for UDMA/133
[ 1.256079] ata3.00: configured for UDMA/133
[ 1.268406] ata4.01: configured for UDMA/133
[ 1.273715] ata3.01: configured for UDMA/100
[ 1.274982] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
[ 1.275104] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.275114] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.275602] sd 2:0:0:0: [sda] Write Protect is off
[ 1.275604] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.275856] scsi 2:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB00 PQ: 0 ANSI: 5
[ 1.275864] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.280022] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.280067] sda:
[ 1.280144] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 1.280177] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 1.280248] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
[ 1.280329] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.280389] scsi 3:0:1:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 1.280468] sd 3:0:1:0: Attached scsi generic sg4 type 0
[ 1.280502] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.280537] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.280540] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.280559] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.280639] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.280693] sd 3:0:1:0: [sdc] Write Protect is off
[ 1.280696] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.280697] sdb:
[ 1.280717] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.294065] sdb1
[ 1.294178] sdc: sda1
[ 1.295915] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.297997] sdc1 sdc2
[ 1.298060] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.298196] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 1.298223] Freeing unused kernel memory: 540k freed
[ 1.298506] Write protecting the kernel text: 4568k
[ 1.298554] Write protecting the kernel read-only data: 1836k
[ 1.391025] Linux agpgart interface v0.103
[ 1.393597] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.393608] atl1 0000:02:00.0: setting latency timer to 64
[ 1.393625] atl1 0000:02:00.0: version 2.1.3
[ 1.409595] ohci1394 0000:04:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.432634] Floppy drive(s): fd0 is 1.44M
[ 1.453178] FDC 0 is a post-1991 82077
[ 1.470186] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.784523] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 2.624500] EXT4-fs (sdc1): barriers enabled
[ 2.631996] kjournald2 starting: pid 394, dev sdc1:8, commit interval 5 seconds
[ 2.632012] EXT4-fs (sdc1): delayed allocation enabled
[ 2.632017] EXT4-fs: file extents enabled
[ 2.634493] EXT4-fs: mballoc enabled
[ 2.634504] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[ 2.757226] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106664555637e]
[ 3.043711] type=1505 audit(1265631023.533:2): operation="profile_load" pid=417 name=/usr/share/gdm/guest-session/Xsession
[ 3.046461] type=1505 audit(1265631023.537:3): operation="profile_load" pid=418 name=/sbin/dhclient3
[ 3.047070] type=1505 audit(1265631023.537:4): operation="profile_load" pid=418 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.047401] type=1505 audit(1265631023.537:5): operation="profile_load" pid=418 name=/usr/lib/connman/scripts/dhclient-script
[ 3.077814] type=1505 audit(1265631023.569:6): operation="profile_load" pid=419 name=/usr/bin/evince
[ 3.087184] type=1505 audit(1265631023.577:7): operation="profile_load" pid=419 name=/usr/bin/evince-previewer
[ 3.092731] type=1505 audit(1265631023.585:8): operation="profile_load" pid=419 name=/usr/bin/evince-thumbnailer
[ 3.103851] type=1505 audit(1265631023.595:9): operation="profile_load" pid=421 name=/usr/lib/cups/backend/cups-pdf
[ 3.104566] type=1505 audit(1265631023.595:10): operation="profile_load" pid=421 name=/usr/sbin/cupsd
[ 3.497576] usb 2-2: configuration #1 chosen from 1 choice
[ 3.740176] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3.912753] usb 3-1: configuration #1 chosen from 1 choice
[ 3.943940] udev: starting version 147
[ 3.944543] EXT4-fs (sdc1): internal journal on sdc1:8
[ 4.157536] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 4.349183] usb 5-1: configuration #1 chosen from 1 choice
[ 4.566055] lp: driver loaded but no devices found
[ 4.580970] usbcore: registered new interface driver hiddev
[ 4.581022] usbcore: registered new interface driver usbhid
[ 4.581024] usbhid: v2.6:USB HID core driver
[ 4.583505] intel_rng: FWH not detected
[ 4.624019] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.624126] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 4.643182] input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input4
[ 4.643276] sony 0003:054C:0268.0001: input,hiddev96,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1d.3-1/input0
[ 4.681047] psmouse serio1: ID: 10 00 64
[ 4.717060] NET: Registered protocol family 8
[ 4.717062] NET: Registered protocol family 20
[ 4.720054] ppdev: user-space parallel port driver
[ 4.721743] lp0: using parport0 (interrupt-driven).
[ 4.750825] [ueagle-atm] driver ueagle 1.4 loaded
[ 4.750846] usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9041) Rev (0X30A9): Eagle IV
[ 4.861047] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[ 5.021597] usb 2-2: [ueagle-atm] using iso mode
[ 5.021748] usb 2-2: [ueagle-atm] (re)booting started
[ 5.023634] usbcore: registered new interface driver ueagle-atm
[ 5.034383] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.034403] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.145411] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 5.247690] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 5.456242] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.683995] __ratelimit: 3 callbacks suppressed
[ 5.683997] type=1505 audit(1265631026.174:12): operation="profile_replace" pid=818 name=/usr/share/gdm/guest-session/Xsession
[ 5.685584] type=1505 audit(1265631026.178:13): operation="profile_replace" pid=819 name=/sbin/dhclient3
[ 5.686200] type=1505 audit(1265631026.178:14): operation="profile_replace" pid=819 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.686534] type=1505 audit(1265631026.178:15): operation="profile_replace" pid=819 name=/usr/lib/connman/scripts/dhclient-script
[ 5.689587] type=1505 audit(1265631026.182:16): operation="profile_replace" pid=820 name=/usr/bin/evince
[ 5.699049] type=1505 audit(1265631026.190:17): operation="profile_replace" pid=820 name=/usr/bin/evince-previewer
[ 5.704648] type=1505 audit(1265631026.194:18): operation="profile_replace" pid=820 name=/usr/bin/evince-thumbnailer
[ 5.712287] type=1505 audit(1265631026.202:19): operation="profile_replace" pid=823 name=/usr/lib/cups/backend/cups-pdf
[ 5.712999] type=1505 audit(1265631026.202:20): operation="profile_replace" pid=823 name=/usr/sbin/cupsd
[ 5.715257] type=1505 audit(1265631026.206:21): operation="profile_replace" pid=824 name=/usr/sbin/tcpdump
[ 6.148049] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 6.179984] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 8.327012] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1091
[ 8.327045] usbcore: registered new interface driver usblp
[ 9.102089] usb 3-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 10.149071] usb 2-2: [ueagle-atm] (re)booting started
[ 10.388111] alloc irq_desc for 27 on node -1
[ 10.388114] alloc kstat_irqs on node -1
[ 10.388128] atl1 0000:02:00.0: irq 27 for MSI/MSI-X
[ 10.388337] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.276068] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 11.278732] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 15.277508] usb 2-2: [ueagle-atm] (re)booting started
[ 16.404111] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 16.406709] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 20.405046] usb 2-2: [ueagle-atm] (re)booting started
[ 21.528108] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 21.530796] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 25.528052] usb 2-2: [ueagle-atm] (re)booting started
[ 26.652587] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 26.654916] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 30.652244] usb 2-2: [ueagle-atm] (re)booting started
[ 31.780096] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 31.783180] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 35.780029] usb 2-2: [ueagle-atm] (re)booting started
[ 36.904043] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 36.906504] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 40.904226] usb 2-2: [ueagle-atm] (re)booting started
[ 42.028121] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 42.030626] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 46.028926] usb 2-2: [ueagle-atm] (re)booting started
[ 47.152311] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 47.155066] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 51.160042] usb 2-2: [ueagle-atm] (re)booting started
[ 52.284289] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 52.286877] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 56.284495] usb 2-2: [ueagle-atm] (re)booting started
[ 57.408201] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 57.410854] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 61.408564] usb 2-2: [ueagle-atm] (re)booting started
[ 62.532048] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 62.534690] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 66.532021] usb 2-2: [ueagle-atm] (re)booting started
[ 67.656107] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 67.658858] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 71.656161] usb 2-2: [ueagle-atm] (re)booting started
[ 72.780021] usb 2-2: firmware: requesting ueagle-atm/DSP4i.bin
[ 72.783345] usb 2-2: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
john@john:~$