Πρόβλημα με wi-fi σε desktop

από **pros** » 08 Δεκ 2010, 13:28

Η γραμμή blacklist carl9170
είναι διπλή (ίσως εκτέλεσες τις παλιότερες οδηγίες δύο φορές)
Δοκίμασε να την διαγράψεις, αν και δεν νομίζω να σ' επηρεάζει αυτό...

Περιμένεις κάποιον πιο έμπειρο με αυτά τα θέματα!

από **Gk0ur0u** » 08 Δεκ 2010, 13:31

Οδηγίες για να την διαγράψω;; (A)

από **pros** » 08 Δεκ 2010, 13:44

Κώδικας: Επιλογή όλων: sudo gedit /etc/modprobe.d/blacklist.conf

Θ' ανοίξεις έτσι το αρχείο blacklist.conf με δικαιώματα διαχειριστή
και θα διαγράψεις την μία από τις δύο γραμμές blacklist carl9170
αποθήκευση και επανεκκίνηση, μπας και...

από **Gk0ur0u** » 08 Δεκ 2010, 13:48

Το έκανα αλλά δεν..

από **logari81** » 08 Δεκ 2010, 13:53

επανεκκίνηση έκανες; ξαναδώσε τα αποτελέσματα των εντολών:

Κώδικας: Επιλογή όλων: lsmod dmesg

από **Gk0ur0u** » 08 Δεκ 2010, 14:06

Ναι, έκανα επαννεκίνηση.

lsmod

Κώδικας: Επιλογή όλων: dopa@dopa-HP-Compaq-dx7500-Microtower:~$ lsmod Module Size Used by binfmt_misc 6586 1 parport_pc 27846 0 ppdev 5245 0 arc4 1133 2 snd_hda_codec_realtek 252133 1 snd_hda_intel 24332 0 snd_hda_codec 86476 2 snd_hda_codec_realtek,snd_hda_intel snd_usb_audio 90444 2 snd_pcm 75543 3 snd_hda_intel,snd_hda_codec,snd_usb_audio snd_hwdep 5181 2 snd_hda_codec,snd_usb_audio snd_usbmidi_lib 17715 1 snd_usb_audio snd_seq_midi 4786 0 nvidia 9329739 38 ar9170usb 48674 0 snd_rawmidi 17763 2 snd_usbmidi_lib,snd_seq_midi snd_seq_midi_event 5919 1 snd_seq_midi mac80211 245343 1 ar9170usb snd_seq 47142 2 snd_seq_midi,snd_seq_midi_event snd_timer 19824 2 snd_pcm,snd_seq snd_seq_device 5776 3 snd_seq_midi,snd_rawmidi,snd_seq ath 13849 1 ar9170usb psmouse 58014 0 intel_agp 9913 0 snd 49949 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 144857 3 ar9170usb,mac80211,ath soundcore 880 1 snd intel_gtt 13287 1 intel_agp agpgart 32238 3 nvidia,intel_agp,intel_gtt snd_page_alloc 7352 2 snd_hda_intel,snd_pcm serio_raw 4062 0 gspca_ov519 34230 0 gspca_main 22768 1 gspca_ov519 videodev 68263 1 gspca_main v4l1_compat 13912 1 videodev lp 7400 0 parport 32560 3 parport_pc,ppdev,lp usb_storage 40290 0 usbhid 36648 0 hid 67486 1 usbhid uas 7466 0 ahci 19176 2 firewire_ohci 25335 0 firewire_core 52533 1 firewire_ohci crc_itu_t 1383 1 firewire_core e1000e 133440 0 libahci 20139 1 ahci dopa@dopa-HP-Compaq-dx7500-Microtower:~$

dmesg

Κώδικας: Επιλογή όλων: [ 712.516153] [<c016c9a5>] kthread+0x75/0x80 [ 712.516158] [<c016c930>] ? kthread+0x0/0x80 [ 712.516162] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 712.516167] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 713.516025] usb 2-2: no command feedback received (-110). [ 713.516030] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 713.516035] Pid: 275, comm: kworker/u:6 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 713.516038] Call Trace: [ 713.516047] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 713.516055] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 713.516061] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 713.516068] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 713.516074] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 713.516086] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 713.516100] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 713.516114] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 713.516119] [<c0168889>] process_one_work+0xd9/0x330 [ 713.516133] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 713.516137] [<c0169483>] worker_thread+0xb3/0x210 [ 713.516142] [<c01693d0>] ? worker_thread+0x0/0x210 [ 713.516146] [<c016c9a5>] kthread+0x75/0x80 [ 713.516151] [<c016c930>] ? kthread+0x0/0x80 [ 713.516155] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 713.516159] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 714.516023] usb 2-2: no command feedback received (-110). [ 714.516027] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 714.516032] Pid: 275, comm: kworker/u:6 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 714.516035] Call Trace: [ 714.516043] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 714.516051] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 714.516058] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 714.516064] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 714.516069] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 714.516082] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 714.516095] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 714.516109] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 714.516114] [<c0168889>] process_one_work+0xd9/0x330 [ 714.516128] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 714.516132] [<c0169483>] worker_thread+0xb3/0x210 [ 714.516136] [<c01693d0>] ? worker_thread+0x0/0x210 [ 714.516141] [<c016c9a5>] kthread+0x75/0x80 [ 714.516146] [<c016c930>] ? kthread+0x0/0x80 [ 714.516150] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 714.516154] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 715.516024] usb 2-2: no command feedback received (-110). [ 715.516029] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 715.516034] Pid: 275, comm: kworker/u:6 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 715.516037] Call Trace: [ 715.516046] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 715.516053] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 715.516060] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 715.516066] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 715.516072] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 715.516084] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 715.516098] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 715.516111] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 715.516116] [<c0168889>] process_one_work+0xd9/0x330 [ 715.516130] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 715.516135] [<c0169483>] worker_thread+0xb3/0x210 [ 715.516139] [<c01693d0>] ? worker_thread+0x0/0x210 [ 715.516143] [<c016c9a5>] kthread+0x75/0x80 [ 715.516148] [<c016c930>] ? kthread+0x0/0x80 [ 715.516152] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 715.516156] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 716.516029] usb 2-2: no command feedback received (-110). [ 716.516034] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 716.516038] Pid: 275, comm: kworker/u:6 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 716.516041] Call Trace: [ 716.516050] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 716.516057] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 716.516064] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 716.516070] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 716.516076] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 716.516088] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 716.516102] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 716.516115] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 716.516121] [<c0168889>] process_one_work+0xd9/0x330 [ 716.516134] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 716.516139] [<c0169483>] worker_thread+0xb3/0x210 [ 716.516143] [<c01693d0>] ? worker_thread+0x0/0x210 [ 716.516148] [<c016c9a5>] kthread+0x75/0x80 [ 716.516152] [<c016c930>] ? kthread+0x0/0x80 [ 716.516156] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 716.516160] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 717.516025] usb 2-2: no command feedback received (-110). [ 717.516030] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 717.516034] Pid: 275, comm: kworker/u:6 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 717.516038] Call Trace: [ 717.516047] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 717.516054] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 717.516061] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 717.516067] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 717.516073] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 717.516086] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 717.516100] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 717.516113] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 717.516118] [<c0168889>] process_one_work+0xd9/0x330 [ 717.516132] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 717.516137] [<c0169483>] worker_thread+0xb3/0x210 [ 717.516141] [<c01693d0>] ? worker_thread+0x0/0x210 [ 717.516145] [<c016c9a5>] kthread+0x75/0x80 [ 717.516150] [<c016c930>] ? kthread+0x0/0x80 [ 717.516154] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 717.516158] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 718.516024] usb 2-2: no command feedback received (-110). [ 718.516029] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 718.516034] Pid: 275, comm: kworker/u:6 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 718.516037] Call Trace: [ 718.516045] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 718.516053] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 718.516060] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 718.516066] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 718.516071] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 718.516084] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 718.516098] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 718.516111] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 718.516116] [<c0168889>] process_one_work+0xd9/0x330 [ 718.516130] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 718.516135] [<c0169483>] worker_thread+0xb3/0x210 [ 718.516139] [<c01693d0>] ? worker_thread+0x0/0x210 [ 718.516144] [<c016c9a5>] kthread+0x75/0x80 [ 718.516148] [<c016c930>] ? kthread+0x0/0x80 [ 718.516152] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 718.516157] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 719.516025] usb 2-2: no command feedback received (-110). [ 719.516030] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 719.516035] Pid: 275, comm: kworker/u:6 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 719.516038] Call Trace: [ 719.516046] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 719.516054] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 719.516061] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 719.516067] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 719.516073] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 719.516085] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 719.516099] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 719.516113] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 719.516118] [<c0168889>] process_one_work+0xd9/0x330 [ 719.516131] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 719.516136] [<c0169483>] worker_thread+0xb3/0x210 [ 719.516140] [<c01693d0>] ? worker_thread+0x0/0x210 [ 719.516145] [<c016c9a5>] kthread+0x75/0x80 [ 719.516149] [<c016c930>] ? kthread+0x0/0x80 [ 719.516153] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 719.516158] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 720.516030] usb 2-2: no command feedback received (-110). [ 720.516036] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 720.516041] Pid: 275, comm: kworker/u:6 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 720.516044] Call Trace: [ 720.516053] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 720.516061] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 720.516067] [<c0167816>] ? __queue_work+0xd6/0x240 [ 720.516073] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 720.516080] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 720.516084] [<c0167a3c>] ? queue_work_on+0x2c/0x40 [ 720.516097] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 720.516111] [<f9090798>] __ieee80211_scan_completed_finish+0x18/0x90 [mac80211] [ 720.516124] [<f909140b>] ieee80211_scan_work+0xcb/0x190 [mac80211] [ 720.516129] [<c0168889>] process_one_work+0xd9/0x330 [ 720.516143] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 720.516148] [<c0169483>] worker_thread+0xb3/0x210 [ 720.516152] [<c01693d0>] ? worker_thread+0x0/0x210 [ 720.516156] [<c016c9a5>] kthread+0x75/0x80 [ 720.516161] [<c016c930>] ? kthread+0x0/0x80 [ 720.516165] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 720.516170] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 767.516046] usb 2-2: no command feedback received (-110). [ 767.516053] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 767.516058] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 767.516061] Call Trace: [ 767.516073] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 767.516081] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 767.516087] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 767.516094] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 767.516107] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 767.516121] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 767.516135] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 767.516143] [<c0168889>] process_one_work+0xd9/0x330 [ 767.516157] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 767.516162] [<c0169483>] worker_thread+0xb3/0x210 [ 767.516166] [<c01693d0>] ? worker_thread+0x0/0x210 [ 767.516171] [<c016c9a5>] kthread+0x75/0x80 [ 767.516175] [<c016c930>] ? kthread+0x0/0x80 [ 767.516180] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 767.516185] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 768.516039] usb 2-2: no command feedback received (-110). [ 768.516046] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 768.516051] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 768.516054] Call Trace: [ 768.516066] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 768.516074] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 768.516081] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 768.516087] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 768.516095] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 768.516109] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 768.516123] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 768.516137] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 768.516142] [<c0168889>] process_one_work+0xd9/0x330 [ 768.516156] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 768.516161] [<c0169483>] worker_thread+0xb3/0x210 [ 768.516165] [<c01693d0>] ? worker_thread+0x0/0x210 [ 768.516170] [<c016c9a5>] kthread+0x75/0x80 [ 768.516174] [<c016c930>] ? kthread+0x0/0x80 [ 768.516179] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 768.516184] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 769.516039] usb 2-2: no command feedback received (-110). [ 769.516046] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 769.516051] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 769.516054] Call Trace: [ 769.516066] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 769.516074] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 769.516081] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 769.516087] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 769.516095] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 769.516108] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 769.516122] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 769.516136] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 769.516141] [<c0168889>] process_one_work+0xd9/0x330 [ 769.516155] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 769.516160] [<c0169483>] worker_thread+0xb3/0x210 [ 769.516164] [<c01693d0>] ? worker_thread+0x0/0x210 [ 769.516169] [<c016c9a5>] kthread+0x75/0x80 [ 769.516173] [<c016c930>] ? kthread+0x0/0x80 [ 769.516178] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 769.516183] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 770.516047] usb 2-2: no command feedback received (-110). [ 770.516053] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 770.516058] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 770.516062] Call Trace: [ 770.516073] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 770.516081] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 770.516088] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 770.516094] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 770.516101] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 770.516115] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 770.516129] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 770.516142] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 770.516148] [<c0168889>] process_one_work+0xd9/0x330 [ 770.516162] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 770.516166] [<c0169483>] worker_thread+0xb3/0x210 [ 770.516171] [<c01693d0>] ? worker_thread+0x0/0x210 [ 770.516175] [<c016c9a5>] kthread+0x75/0x80 [ 770.516180] [<c016c930>] ? kthread+0x0/0x80 [ 770.516184] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 770.516189] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 771.516040] usb 2-2: no command feedback received (-110). [ 771.516047] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 771.516052] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 771.516056] Call Trace: [ 771.516067] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 771.516075] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 771.516082] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 771.516088] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 771.516096] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 771.516110] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 771.516124] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 771.516137] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 771.516143] [<c0168889>] process_one_work+0xd9/0x330 [ 771.516157] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 771.516162] [<c0169483>] worker_thread+0xb3/0x210 [ 771.516166] [<c01693d0>] ? worker_thread+0x0/0x210 [ 771.516171] [<c016c9a5>] kthread+0x75/0x80 [ 771.516175] [<c016c930>] ? kthread+0x0/0x80 [ 771.516180] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 771.516185] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 772.516048] usb 2-2: no command feedback received (-110). [ 772.516055] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 772.516060] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 772.516064] Call Trace: [ 772.516075] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 772.516083] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 772.516090] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 772.516096] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 772.516104] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 772.516118] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 772.516132] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 772.516145] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 772.516151] [<c0168889>] process_one_work+0xd9/0x330 [ 772.516165] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 772.516169] [<c0169483>] worker_thread+0xb3/0x210 [ 772.516174] [<c01693d0>] ? worker_thread+0x0/0x210 [ 772.516178] [<c016c9a5>] kthread+0x75/0x80 [ 772.516183] [<c016c930>] ? kthread+0x0/0x80 [ 772.516187] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 772.516193] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 773.516040] usb 2-2: no command feedback received (-110). [ 773.516047] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 773.516052] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 773.516056] Call Trace: [ 773.516067] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 773.516074] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 773.516081] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 773.516087] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 773.516096] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 773.516109] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 773.516123] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 773.516137] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 773.516142] [<c0168889>] process_one_work+0xd9/0x330 [ 773.516156] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 773.516161] [<c0169483>] worker_thread+0xb3/0x210 [ 773.516165] [<c01693d0>] ? worker_thread+0x0/0x210 [ 773.516170] [<c016c9a5>] kthread+0x75/0x80 [ 773.516174] [<c016c930>] ? kthread+0x0/0x80 [ 773.516179] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 773.516185] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 774.516024] usb 2-2: no command feedback received (-110). [ 774.516030] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 774.516033] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 774.516035] Call Trace: [ 774.516044] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 774.516049] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 774.516053] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 774.516056] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 774.516062] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 774.516071] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 774.516079] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 774.516087] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 774.516091] [<c0168889>] process_one_work+0xd9/0x330 [ 774.516099] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 774.516102] [<c0169483>] worker_thread+0xb3/0x210 [ 774.516104] [<c01693d0>] ? worker_thread+0x0/0x210 [ 774.516107] [<c016c9a5>] kthread+0x75/0x80 [ 774.516110] [<c016c930>] ? kthread+0x0/0x80 [ 774.516112] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 774.516116] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 775.516027] usb 2-2: no command feedback received (-110). [ 775.516034] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 775.516039] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 775.516043] Call Trace: [ 775.516054] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 775.516062] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 775.516068] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 775.516075] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 775.516083] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 775.516096] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 775.516110] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 775.516124] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 775.516129] [<c0168889>] process_one_work+0xd9/0x330 [ 775.516143] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 775.516148] [<c0169483>] worker_thread+0xb3/0x210 [ 775.516152] [<c01693d0>] ? worker_thread+0x0/0x210 [ 775.516157] [<c016c9a5>] kthread+0x75/0x80 [ 775.516161] [<c016c930>] ? kthread+0x0/0x80 [ 775.516166] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 775.516172] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 776.516034] usb 2-2: no command feedback received (-110). [ 776.516039] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 776.516045] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 776.516048] Call Trace: [ 776.516059] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 776.516067] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 776.516074] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 776.516080] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 776.516088] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 776.516102] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 776.516116] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 776.516130] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 776.516135] [<c0168889>] process_one_work+0xd9/0x330 [ 776.516149] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 776.516154] [<c0169483>] worker_thread+0xb3/0x210 [ 776.516158] [<c01693d0>] ? worker_thread+0x0/0x210 [ 776.516162] [<c016c9a5>] kthread+0x75/0x80 [ 776.516167] [<c016c930>] ? kthread+0x0/0x80 [ 776.516172] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 776.516177] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 777.516025] usb 2-2: no command feedback received (-110). [ 777.516031] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 777.516036] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 777.516040] Call Trace: [ 777.516051] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 777.516059] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 777.516066] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 777.516072] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 777.516080] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 777.516093] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 777.516107] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 777.516121] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 777.516127] [<c0168889>] process_one_work+0xd9/0x330 [ 777.516141] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 777.516146] [<c0169483>] worker_thread+0xb3/0x210 [ 777.516150] [<c01693d0>] ? worker_thread+0x0/0x210 [ 777.516154] [<c016c9a5>] kthread+0x75/0x80 [ 777.516159] [<c016c930>] ? kthread+0x0/0x80 [ 777.516163] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 777.516169] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 778.516034] usb 2-2: no command feedback received (-110). [ 778.516039] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 778.516045] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 778.516048] Call Trace: [ 778.516060] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 778.516067] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 778.516074] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 778.516080] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 778.516088] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 778.516101] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 778.516115] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 778.516129] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 778.516134] [<c0168889>] process_one_work+0xd9/0x330 [ 778.516148] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 778.516153] [<c0169483>] worker_thread+0xb3/0x210 [ 778.516157] [<c01693d0>] ? worker_thread+0x0/0x210 [ 778.516162] [<c016c9a5>] kthread+0x75/0x80 [ 778.516166] [<c016c930>] ? kthread+0x0/0x80 [ 778.516171] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 778.516176] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 779.516026] usb 2-2: no command feedback received (-110). [ 779.516032] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 779.516037] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 779.516041] Call Trace: [ 779.516052] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 779.516060] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 779.516067] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 779.516073] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 779.516080] [<c0172fe5>] ? pm_qos_request+0x35/0x60 [ 779.516094] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 779.516108] [<f90906bc>] ieee80211_scan_state_set_channel+0x3c/0xa0 [mac80211] [ 779.516121] [<f9091482>] ieee80211_scan_work+0x142/0x190 [mac80211] [ 779.516127] [<c0168889>] process_one_work+0xd9/0x330 [ 779.516141] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 779.516145] [<c0169483>] worker_thread+0xb3/0x210 [ 779.516150] [<c01693d0>] ? worker_thread+0x0/0x210 [ 779.516154] [<c016c9a5>] kthread+0x75/0x80 [ 779.516159] [<c016c930>] ? kthread+0x0/0x80 [ 779.516163] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 779.516169] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed [ 780.516030] usb 2-2: no command feedback received (-110). [ 780.516035] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 780.516041] Pid: 271, comm: kworker/u:2 Tainted: P 2.6.37-020637rc3-generic #201011220905 [ 780.516044] Call Trace: [ 780.516055] [<f9af3c5a>] ar9170_usb_exec_cmd+0x1ba/0x200 [ar9170usb] [ 780.516063] [<f9af6c44>] ar9170_write_reg+0x54/0xa0 [ar9170usb] [ 780.516070] [<c0167816>] ? __queue_work+0xd6/0x240 [ 780.516077] [<f9af7b08>] ar9170_set_slot_time+0x38/0x50 [ar9170usb] [ 780.516083] [<f9af523a>] ar9170_op_config+0x4a/0xc0 [ar9170usb] [ 780.516087] [<c0167a3c>] ? queue_work_on+0x2c/0x40 [ 780.516101] [<f908c505>] ieee80211_hw_config+0xd5/0x140 [mac80211] [ 780.516115] [<f9090798>] __ieee80211_scan_completed_finish+0x18/0x90 [mac80211] [ 780.516129] [<f909140b>] ieee80211_scan_work+0xcb/0x190 [mac80211] [ 780.516133] [<c0168889>] process_one_work+0xd9/0x330 [ 780.516147] [<f9091340>] ? ieee80211_scan_work+0x0/0x190 [mac80211] [ 780.516152] [<c0169483>] worker_thread+0xb3/0x210 [ 780.516157] [<c01693d0>] ? worker_thread+0x0/0x210 [ 780.516161] [<c016c9a5>] kthread+0x75/0x80 [ 780.516166] [<c016c930>] ? kthread+0x0/0x80 [ 780.516170] [<c01032fe>] kernel_thread_helper+0x6/0x10 [ 780.516176] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed dopa@dopa-HP-Compaq-dx7500-Microtower:~$

από **Gk0ur0u** » 10 Δεκ 2010, 01:32

Παρακάτω;; :roll:

από **xaris2335** » 10 Δεκ 2010, 13:03

για δώσε το αποτέλεσμα απο

Κώδικας: Επιλογή όλων: modinfo ar9170usb ls /lib/firmware

από **xaris2335** » 10 Δεκ 2010, 13:34

χμ...

επίσης δοκίμασε να κάνεις αυτό

Κώδικας: Επιλογή όλων: sudo modprobe -r ieee80211

αν δουλέψει τότε κάνε το blacklist με τον τρόπο που σου είπε ο pros

από **xaris2335** » 10 Δεκ 2010, 15:36

και κάτι άλλο γιατί ενώ το επίσημο σάιτ του ubuntu έχει οδηγίες για το ndiswrapper εμείς δεν το συνιστούμε και το σνομπάρουμε!! :problem:

Λειτουργικό: Ubuntu 10.04 lucid 64-bit	Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]	Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)

Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop

Re: Πρόβλημα με wi-fi σε desktop