Belkin Wireless N+ Usb Adapter δεν βλεπω ασυρματα δικτυα

[perceval777]

Γεια σε ολους!! εχω εγκαταστήσει το 10.04 στο dektop μου... πανω δεξια δεν βλέπει καν τα ασυρματα δικτυα ενω υπαρχουν o Usb Adapor μου ειναι http://en-us-support.belkin.com/app/pro ... tail/p/215 δεν μπορω να συνδεσω το desktop στο internet με καποιον αλλο τροπο οποτε δεν μπορω να κανω καποιο update .. εχω τρεξει τις παρακατω εντολες ... αλλα δεν ξερω τι ακριβως πρεπει να κανω ! ! !


lsusb

Κώδικας: Επιλογή όλων

Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 045e:00dd Microsoft Corp.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c21a Logitech, Inc. Precision Gamepad
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 050d:825b Belkin Components
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


lsmod

Κώδικας: Επιλογή όλων

vaios@vaios-desktop:~$ lsmod
Module Size Used by
nls_iso8859_1 3249 1
nls_cp437 4919 1
vfat 8901 1
fat 47767 1 vfat
usb_storage 39425 1
binfmt_misc 6587 1
snd_hda_codec_atihdmi 2367 1
fbcon 35102 72
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_hda_codec_realtek 203168 1
snd_hda_intel 21877 2
snd_hda_codec 74201 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70662 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
radeon 674135 3
ppdev 5259 0
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ttm 49943 1 radeon
drm_kms_helper 29297 1 radeon
parport_pc 25962 1
asus_atk0110 9017 0
joydev 8708 0
intel_agp 24177 0
psmouse 63245 0
serio_raw 3978 0
drm 162471 5 radeon,ttm,drm_kms_helper
snd 54148 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
agpgart 31724 3 ttm,intel_agp,drm
i2c_algo_bit 5028 1 radeon
soundcore 6620 1 snd
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
usbhid 36110 0
hid 67032 1 usbhid
floppy 53016 1
pata_jmicron 1843 0
r8169 33884 0
mii 4381 1 r8169


dmesg

Κώδικας: Επιλογή όλων

[ 0.262954] alloc kstat_irqs on node -1
[ 0.262960] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.262965] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.263043] alloc irq_desc for 25 on node -1
[ 0.263045] alloc kstat_irqs on node -1
[ 0.263051] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.263057] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.263154] alloc irq_desc for 26 on node -1
[ 0.263155] alloc kstat_irqs on node -1
[ 0.263160] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.263167] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.263260] alloc irq_desc for 27 on node -1
[ 0.263261] alloc kstat_irqs on node -1
[ 0.263267] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.263273] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.263340] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.263419] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.263504] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.263507] ACPI: Power Button [PWRB]
[ 0.263543] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.263545] ACPI: Power Button [PWRF]
[ 0.264101] ACPI: SSDT 7ff8e0d0 002B9 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.264477] ACPI: SSDT 7ff8e650 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.264751] Monitor-Mwait will be used to enter C-1 state
[ 0.264769] Monitor-Mwait will be used to enter C-2 state
[ 0.264774] Marking TSC unstable due to TSC halts in idle
[ 0.264808] processor LNXCPU:00: registered as cooling_device0
[ 0.265131] ACPI: SSDT 7ff8e390 002B9 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.265393] ACPI: SSDT 7ff8eb10 00085 (v01 PmRef P002Cst 00003000 INTL 20051117)
[ 0.265701] Switching to clocksource hpet
[ 0.267781] processor LNXCPU:01: registered as cooling_device1
[ 0.271151] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.271237] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.271571] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.272410] brd: module loaded
[ 0.272762] loop: module loaded
[ 0.272821] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.272891] ata_piix 0000:00:1f.2: version 2.13
[ 0.272904] alloc irq_desc for 19 on node -1
[ 0.272906] alloc kstat_irqs on node -1
[ 0.272910] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.272914] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.272948] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.272995] scsi0 : ata_piix
[ 0.273049] scsi1 : ata_piix
[ 0.274114] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.274119] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.274135] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.274139] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.274167] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.274194] scsi2 : ata_piix
[ 0.274231] scsi3 : ata_piix
[ 0.275093] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.275096] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.275144] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.275167] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 0.275178] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 0.275276] isapnp: Scanning for PnP cards...
[ 0.275405] Fixed MDIO Bus: probed
[ 0.275430] PPP generic driver version 2.4.2
[ 0.275458] tun: Universal TUN/TAP device driver, 1.6
[ 0.275460] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.275525] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.275537] alloc irq_desc for 18 on node -1
[ 0.275539] alloc kstat_irqs on node -1
[ 0.275542] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.275550] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.275553] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.275577] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.275596] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.279493] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.279503] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fe000
[ 0.322322] Freeing initrd memory: 7767k freed
[ 0.326842] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.326968] usb usb1: configuration #1 chosen from 1 choice
[ 0.326991] hub 1-0:1.0: USB hub found
[ 0.327000] hub 1-0:1.0: 6 ports detected
[ 0.327059] alloc irq_desc for 23 on node -1
[ 0.327061] alloc kstat_irqs on node -1
[ 0.327066] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.327081] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.327084] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.327111] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.327134] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.331007] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.331022] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fc000
[ 0.348008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.348070] usb usb2: configuration #1 chosen from 1 choice
[ 0.348091] hub 2-0:1.0: USB hub found
[ 0.348097] hub 2-0:1.0: 6 ports detected
[ 0.348143] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.348158] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.348193] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.348199] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.348202] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.348224] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.348249] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.348315] usb usb3: configuration #1 chosen from 1 choice
[ 0.348334] hub 3-0:1.0: USB hub found
[ 0.348343] hub 3-0:1.0: 2 ports detected
[ 0.348375] alloc irq_desc for 21 on node -1
[ 0.348377] alloc kstat_irqs on node -1
[ 0.348380] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.348385] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.348387] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.348409] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.348434] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.348503] usb usb4: configuration #1 chosen from 1 choice
[ 0.348521] hub 4-0:1.0: USB hub found
[ 0.348526] hub 4-0:1.0: 2 ports detected
[ 0.348558] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.348563] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.348565] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.348592] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.348611] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.348676] usb usb5: configuration #1 chosen from 1 choice
[ 0.348694] hub 5-0:1.0: USB hub found
[ 0.348699] hub 5-0:1.0: 2 ports detected
[ 0.348736] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.348740] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.348743] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.348767] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.348786] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.348849] usb usb6: configuration #1 chosen from 1 choice
[ 0.348868] hub 6-0:1.0: USB hub found
[ 0.348873] hub 6-0:1.0: 2 ports detected
[ 0.348904] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.348909] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.348911] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.348935] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.348955] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.349018] usb usb7: configuration #1 chosen from 1 choice
[ 0.349036] hub 7-0:1.0: USB hub found
[ 0.349041] hub 7-0:1.0: 2 ports detected
[ 0.349075] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.349079] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.349081] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.349105] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.349124] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.349187] usb usb8: configuration #1 chosen from 1 choice
[ 0.349206] hub 8-0:1.0: USB hub found
[ 0.349211] hub 8-0:1.0: 2 ports detected
[ 0.349293] PNP: No PS/2 controller found. Probing ports directly.
[ 0.351825] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.351830] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.351920] mice: PS/2 mouse device common for all mice
[ 0.352025] rtc_cmos 00:03: RTC can wake from S4
[ 0.352056] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.352077] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.352153] device-mapper: uevent: version 1.0.3
[ 0.352220] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.352267] device-mapper: multipath: version 1.1.0 loaded
[ 0.352269] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.352350] EISA: Probing bus 0 at eisa.0
[ 0.352355] Cannot allocate resource for EISA slot 1
[ 0.352372] EISA: Detected 0 cards.
[ 0.352463] cpuidle: using governor ladder
[ 0.352528] cpuidle: using governor menu
[ 0.352866] TCP cubic registered
[ 0.352978] NET: Registered protocol family 10
[ 0.353338] lo: Disabled Privacy Extensions
[ 0.353593] NET: Registered protocol family 17
[ 0.354048] Using IPI No-Shortcut mode
[ 0.354098] PM: Resume from disk failed.
[ 0.354107] registered taskstats version 1
[ 0.354461] Magic number: 10:841:522
[ 0.354525] rtc_cmos 00:03: setting system clock to 2010-05-07 08:31:54 UTC (1273221114)
[ 0.354527] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.354529] EDD information not available.
[ 0.636441] isapnp: No Plug & Play device found
[ 0.662579] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.673125] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.728030] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 0.877642] usb 2-1: configuration #1 chosen from 1 choice
[ 1.140072] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.140084] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.140248] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.140259] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.140268] ata2.01: link offline, clearing class 3 to NONE
[ 1.148359] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
[ 1.148608] ata1.00: ATA-8: WDC WD5000AAKS-22A7B2, 01.03B01, max UDMA/133
[ 1.148612] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.164378] ata2.00: configured for UDMA/100
[ 1.165424] ata1.00: configured for UDMA/133
[ 1.165536] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5
[ 1.165631] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.165633] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.165671] sd 0:0:0:0: [sda] Write Protect is off
[ 1.165673] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.165731] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.165835] sda:
[ 1.166882] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5
[ 1.170436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.170440] Uniform CD-ROM driver Revision: 3.20
[ 1.170537] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.170568] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.183162] sda1 sda2 < sda5 sda6 >
[ 1.212434] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.212444] Freeing unused kernel memory: 656k freed
[ 1.212718] Write protecting the kernel text: 4676k
[ 1.212751] Write protecting the kernel read-only data: 1840k
[ 1.224648] udev: starting version 151
[ 1.228769] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.272286] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.272302] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.272333] r8169 0000:02:00.0: setting latency timer to 64
[ 1.272372] alloc irq_desc for 28 on node -1
[ 1.272374] alloc kstat_irqs on node -1
[ 1.272385] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[ 1.281792] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.281823] pata_jmicron 0000:03:00.0: setting latency timer to 64
[ 1.283704] eth0: RTL8168c/8111c at 0xf804c000, 00:23:54:5e:4c:fe, XID 1c4000c0 IRQ 28
[ 1.287607] scsi4 : pata_jmicron
[ 1.302580] scsi5 : pata_jmicron
[ 1.303291] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.303294] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[ 1.308120] Floppy drive(s): fd0 is 1.44M
[ 1.328167] FDC 0 is a post-1991 82077
[ 1.407371] usb 3-1: configuration #1 chosen from 1 choice
[ 1.610313] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 1.615813] usbcore: registered new interface driver hiddev
[ 1.636390] input: Logitech Logitech(R) Precision(TM) Gamepad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 1.636448] generic-usb 0003:046D:C21A.0001: input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech(R) Precision(TM) Gamepad] on usb-0000:00:1a.0-1/input0
[ 1.636468] usbcore: registered new interface driver usbhid
[ 1.636470] usbhid: v2.6:USB HID core driver
[ 1.656028] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 1.838918] usb 6-2: configuration #1 chosen from 1 choice
[ 1.857084] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4
[ 1.857144] generic-usb 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2/input0
[ 2.096039] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 2.278093] usb 7-1: configuration #1 chosen from 1 choice
[ 2.295214] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input5
[ 2.295262] generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1/input0
[ 2.319130] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input6
[ 2.319174] generic-usb 0003:045E:00DD.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1/input1
[ 7.287133] udev: starting version 151
[ 7.306923] Adding 6037496k swap on /dev/sda6. Priority:-1 extents:1 across:6037496k
[ 7.348193] Linux agpgart interface v0.103
[ 7.382113] lp: driver loaded but no devices found
[ 7.511069] [drm] Initialized drm 1.1.0 20060810
[ 7.518184] parport_pc 00:07: reported by Plug and Play ACPI
[ 7.518286] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 7.520519] type=1505 audit(1273210321.665:2): operation="profile_load" pid=652 name="/sbin/dhclient3"
[ 7.521028] type=1505 audit(1273210321.665:3): operation="profile_load" pid=652 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 7.521300] type=1505 audit(1273210321.665:4): operation="profile_load" pid=652 name="/usr/lib/connman/scripts/dhclient-script"
[ 7.545504] ppdev: user-space parallel port driver
[ 7.567691] [drm] radeon defaulting to kernel modesetting.
[ 7.567694] [drm] radeon kernel modesetting enabled.
[ 7.567733] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.567737] radeon 0000:01:00.0: setting latency timer to 64
[ 7.568704] [drm] radeon: Initializing kernel modesetting.
[ 7.576307] [drm] register mmio base: 0xFE9E0000
[ 7.576310] [drm] register mmio size: 65536
[ 7.576369] ATOM BIOS:
[ 7.576383] [drm] Clocks initialized !
[ 7.577106] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.577109] [drm] RAM width 128bits DDR
[ 7.577226] [TTM] Zone kernel: Available graphics memory: 436872 kiB.
[ 7.577228] [TTM] Zone highmem: Available graphics memory: 1030540 kiB.
[ 7.577243] [drm] radeon: 256M of VRAM memory ready
[ 7.577245] [drm] radeon: 512M of GTT memory ready.
[ 7.577288] alloc irq_desc for 29 on node -1
[ 7.577290] alloc kstat_irqs on node -1
[ 7.577300] radeon 0000:01:00.0: irq 29 for MSI/MSI-X
[ 7.577305] [drm] radeon: using MSI.
[ 7.577332] [drm] radeon: irq initialized.
[ 7.577335] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.577556] [drm] Loading RV730 Microcode
[ 7.577560] platform radeon_cp.0: firmware: requesting radeon/RV730_pfp.bin
[ 7.579367] platform radeon_cp.0: firmware: requesting radeon/RV730_me.bin
[ 7.581939] platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin
[ 7.616155] lp0: using parport0 (interrupt-driven).
[ 7.639705] [drm] ring test succeeded in 1 usecs
[ 7.639831] [drm] radeon: ib pool ready.
[ 7.639895] [drm] ib test succeeded in 0 usecs
[ 7.640400] [drm] Default TV standard: PAL
[ 7.640980] [drm] Radeon Display Connectors
[ 7.640982] [drm] Connector 0:
[ 7.640983] [drm] DVI-I
[ 7.640985] [drm] HPD2
[ 7.640986] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 7.640988] [drm] Encoders:
[ 7.640989] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.640990] [drm] DFP2: INTERNAL_UNIPHY1
[ 7.640992] [drm] Connector 1:
[ 7.640993] [drm] DIN
[ 7.640994] [drm] Encoders:
[ 7.640995] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.640996] [drm] Connector 2:
[ 7.640997] [drm] DVI-I
[ 7.640998] [drm] HPD1
[ 7.641000] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 7.641001] [drm] Encoders:
[ 7.641003] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.641004] [drm] DFP1: INTERNAL_UNIPHY
[ 7.641773] alloc irq_desc for 22 on node -1
[ 7.641775] alloc kstat_irqs on node -1
[ 7.641780] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.641806] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.720588] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 7.770827] [drm] fb mappable at 0xE0141000
[ 7.770830] [drm] vram apper at 0xE0000000
[ 7.770831] [drm] size 7257600
[ 7.770832] [drm] fb depth is 24
[ 7.770833] [drm] pitch is 6912
[ 7.770940] fb0: radeondrmfb frame buffer device
[ 7.770941] registered panic notifier
[ 7.770946] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 7.770977] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.770998] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 7.772771] vga16fb: initializing
[ 7.772774] vga16fb: mapped to 0xc00a0000
[ 7.772777] vga16fb: not registering due to another framebuffer present
[ 7.793245] Console: switching to colour frame buffer device 210x65
[ 7.875434] type=1505 audit(1273210322.017:5): operation="profile_load" pid=844 name="/usr/share/gdm/guest-session/Xsession"
[ 7.887956] type=1505 audit(1273210322.029:6): operation="profile_replace" pid=847 name="/sbin/dhclient3"
[ 7.888517] type=1505 audit(1273210322.033:7): operation="profile_replace" pid=847 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 7.888795] type=1505 audit(1273210322.033:8): operation="profile_replace" pid=847 name="/usr/lib/connman/scripts/dhclient-script"
[ 7.895355] r8169: eth0: link down
[ 7.895502] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.897553] type=1505 audit(1273210322.041:9): operation="profile_load" pid=857 name="/usr/bin/evince"
[ 7.903997] type=1505 audit(1273210322.045:10): operation="profile_load" pid=857 name="/usr/bin/evince-previewer"
[ 7.910691] type=1505 audit(1273210322.053:11): operation="profile_load" pid=857 name="/usr/bin/evince-thumbnailer"
[ 9.829349] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 34.652612] end_request: I/O error, dev fd0, sector 0
[ 46.820555] end_request: I/O error, dev fd0, sector 0
[ 59.432862] end_request: I/O error, dev fd0, sector 0
[ 71.604714] end_request: I/O error, dev fd0, sector 0
[ 71.604721] __ratelimit: 9 callbacks suppressed
[ 71.604725] Buffer I/O error on device fd0, logical block 0
[ 83.765522] end_request: I/O error, dev fd0, sector 0
[ 83.765529] Buffer I/O error on device fd0, logical block 0
[ 95.924725] end_request: I/O error, dev fd0, sector 0
[ 95.924732] Buffer I/O error on device fd0, logical block 0
[ 108.076743] end_request: I/O error, dev fd0, sector 0
[ 108.076749] Buffer I/O error on device fd0, logical block 0
[ 120.232508] end_request: I/O error, dev fd0, sector 0
[ 120.232514] Buffer I/O error on device fd0, logical block 0
[ 132.392714] end_request: I/O error, dev fd0, sector 0
[ 132.392720] Buffer I/O error on device fd0, logical block 0
[ 144.544737] end_request: I/O error, dev fd0, sector 0
[ 144.544744] Buffer I/O error on device fd0, logical block 0
[ 152.240032] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 152.374343] usb 1-2: configuration #1 chosen from 1 choice
[ 152.410310] Initializing USB Mass Storage driver...
[ 152.410452] scsi6 : SCSI emulation for USB Mass Storage devices
[ 152.410701] usbcore: registered new interface driver usb-storage
[ 152.410705] USB Mass Storage support registered.
[ 152.412347] usb-storage: device found at 3
[ 152.412350] usb-storage: waiting for device to settle before scanning
[ 156.701213] end_request: I/O error, dev fd0, sector 0
[ 156.701220] Buffer I/O error on device fd0, logical block 0
[ 157.408652] usb-storage: device scan complete
[ 157.409140] scsi 6:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 157.409619] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 157.411246] sd 6:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 157.413733] sd 6:0:0:0: [sdb] Write Protect is off
[ 157.413738] sd 6:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 157.413741] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 157.417367] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 157.417373] sdb: sdb1
[ 157.419366] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 157.419371] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 168.873363] end_request: I/O error, dev fd0, sector 0
[ 168.873370] Buffer I/O error on device fd0, logical block 0
[ 181.037698] end_request: I/O error, dev fd0, sector 0
[ 181.037705] Buffer I/O error on device fd0, logical block 0
[ 193.204414] end_request: I/O error, dev fd0, sector 0
[ 193.204421] Buffer I/O error on device fd0, logical block 0
[ 205.368380] end_request: I/O error, dev fd0, sector 0
[ 205.368387] Buffer I/O error on device fd0, logical block 0
[ 208.156025] usb 1-2: USB disconnect, address 3
[ 209.388034] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 209.522468] usb 1-2: configuration #1 chosen from 1 choice
[ 209.522770] scsi7 : SCSI emulation for USB Mass Storage devices
[ 209.522950] usb-storage: device found at 4
[ 209.522952] usb-storage: waiting for device to settle before scanning
[ 214.520275] usb-storage: device scan complete
[ 214.520769] scsi 7:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 214.521247] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 214.525637] sd 7:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 214.526130] sd 7:0:0:0: [sdb] Write Protect is off
[ 214.526134] sd 7:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 214.526137] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 214.528766] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 214.528771] sdb: sdb1
[ 214.530748] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 214.530753] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 217.536804] end_request: I/O error, dev fd0, sector 0
[ 217.536811] Buffer I/O error on device fd0, logical block 0
[ 229.692924] end_request: I/O error, dev fd0, sector 0
[ 229.692931] Buffer I/O error on device fd0, logical block 0
[ 229.904017] usb 1-2: USB disconnect, address 4
[ 231.888033] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 232.022473] usb 1-2: configuration #1 chosen from 1 choice
[ 232.022774] scsi8 : SCSI emulation for USB Mass Storage devices
[ 232.022953] usb-storage: device found at 5
[ 232.022955] usb-storage: waiting for device to settle before scanning
[ 237.020161] usb-storage: device scan complete
[ 237.020648] scsi 8:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 237.021124] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 237.023876] sd 8:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 237.024627] sd 8:0:0:0: [sdb] Write Protect is off
[ 237.024632] sd 8:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 237.024635] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 237.027374] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 237.027379] sdb: sdb1
[ 237.029872] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 237.029877] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 241.861695] end_request: I/O error, dev fd0, sector 0
[ 241.861703] Buffer I/O error on device fd0, logical block 0
[ 250.547769] usb 1-2: USB disconnect, address 5
[ 252.108035] usb 1-2: new high speed USB device using ehci_hcd and address 6
[ 252.242474] usb 1-2: configuration #1 chosen from 1 choice
[ 252.242778] scsi9 : SCSI emulation for USB Mass Storage devices
[ 252.242956] usb-storage: device found at 6
[ 252.242959] usb-storage: waiting for device to settle before scanning
[ 254.032500] end_request: I/O error, dev fd0, sector 0
[ 254.032507] Buffer I/O error on device fd0, logical block 0
[ 257.240158] usb-storage: device scan complete
[ 257.240649] scsi 9:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 257.241124] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 257.243480] sd 9:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 257.244332] sd 9:0:0:0: [sdb] Write Protect is off
[ 257.244337] sd 9:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 257.244340] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 257.247258] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 257.247263] sdb: sdb1
[ 257.249631] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 257.249636] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 264.292023] usb 1-2: USB disconnect, address 6
[ 266.196510] end_request: I/O error, dev fd0, sector 0
[ 266.196516] Buffer I/O error on device fd0, logical block 0
[ 266.300031] usb 1-2: new high speed USB device using ehci_hcd and address 7
[ 266.434477] usb 1-2: configuration #1 chosen from 1 choice
[ 266.434773] scsi10 : SCSI emulation for USB Mass Storage devices
[ 266.434952] usb-storage: device found at 7
[ 266.434955] usb-storage: waiting for device to settle before scanning
[ 271.432789] usb-storage: device scan complete
[ 271.433280] scsi 10:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 271.433760] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 271.438769] sd 10:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 271.439256] sd 10:0:0:0: [sdb] Write Protect is off
[ 271.439260] sd 10:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 271.439263] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 271.441756] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 271.441760] sdb: sdb1
[ 271.444002] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 271.444007] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 278.360466] end_request: I/O error, dev fd0, sector 0
[ 278.360473] Buffer I/O error on device fd0, logical block 0
[ 287.991023] usb 1-2: USB disconnect, address 7
[ 289.832031] usb 1-2: new high speed USB device using ehci_hcd and address 8
[ 289.966483] usb 1-2: configuration #1 chosen from 1 choice
[ 289.966779] scsi11 : SCSI emulation for USB Mass Storage devices
[ 289.966957] usb-storage: device found at 8
[ 289.966960] usb-storage: waiting for device to settle before scanning
[ 290.525526] end_request: I/O error, dev fd0, sector 0
[ 290.525534] Buffer I/O error on device fd0, logical block 0
[ 294.964794] usb-storage: device scan complete
[ 294.965282] scsi 11:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 294.966255] sd 11:0:0:0: Attached scsi generic sg2 type 0
[ 294.968588] sd 11:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 294.969140] sd 11:0:0:0: [sdb] Write Protect is off
[ 294.969144] sd 11:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 294.969147] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 294.971758] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 294.971763] sdb: sdb1
[ 294.974000] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 294.974003] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[ 302.692536] end_request: I/O error, dev fd0, sector 0
[ 302.692543] Buffer I/O error on device fd0, logical block 0
[ 314.860309] end_request: I/O error, dev fd0, sector 0
[ 314.860316] Buffer I/O error on device fd0, logical block 0
[ 322.885648] usb 1-2: USB disconnect, address 8
[ 326.704035] usb 1-2: new high speed USB device using ehci_hcd and address 9
[ 326.838345] usb 1-2: configuration #1 chosen from 1 choice
[ 326.838641] scsi12 : SCSI emulation for USB Mass Storage devices
[ 326.838821] usb-storage: device found at 9
[ 326.838823] usb-storage: waiting for device to settle before scanning
[ 327.028692] end_request: I/O error, dev fd0, sector 0
[ 327.028699] Buffer I/O error on device fd0, logical block 0
[ 331.836153] usb-storage: device scan complete
[ 331.836641] scsi 12:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 331.837127] sd 12:0:0:0: Attached scsi generic sg2 type 0
[ 331.839868] sd 12:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 331.840406] sd 12:0:0:0: [sdb] Write Protect is off
[ 331.840410] sd 12:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 331.840414] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 331.843492] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 331.843498] sdb: sdb1
[ 331.846112] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 331.846117] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[ 339.192843] end_request: I/O error, dev fd0, sector 0
[ 339.192849] Buffer I/O error on device fd0, logical block 0
[ 351.352727] end_request: I/O error, dev fd0, sector 0
[ 351.352734] Buffer I/O error on device fd0, logical block 0
[ 363.517011] end_request: I/O error, dev fd0, sector 0
[ 363.517018] Buffer I/O error on device fd0, logical block 0
[ 375.688844] end_request: I/O error, dev fd0, sector 0
[ 375.688851] Buffer I/O error on device fd0, logical block 0
[ 387.848411] end_request: I/O error, dev fd0, sector 0
[ 387.848418] Buffer I/O error on device fd0, logical block 0
[ 400.017475] end_request: I/O error, dev fd0, sector 0
[ 400.017482] Buffer I/O error on device fd0, logical block 0
[ 412.188619] end_request: I/O error, dev fd0, sector 0
[ 412.188625] Buffer I/O error on device fd0, logical block 0
[ 424.357700] end_request: I/O error, dev fd0, sector 0
[ 424.357707] Buffer I/O error on device fd0, logical block 0
[ 436.524742] end_request: I/O error, dev fd0, sector 0
[ 436.524748] Buffer I/O error on device fd0, logical block 0


iwconfig

Κώδικας: Επιλογή όλων

vaios@vaios-desktop:~$ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

[logari81]

χμ, απότι βλέπω δεν φορτώνεται κάποιος οδηγός για αυτην την συσκευη. Υπεθετα ότι θα επρεπε να δουλεύει με τον rt2870sta αλλα απότι φαίνεται χρειάζεται τον rt3070 που δεν περιλαμβάνεται στον πυρήνα. Οδηγίες υπάρχουν εδω:
http://beautifuldiscovery.wordpress.com ... th-ubuntu/

Αλλά καλύτερα περιμενε, μολις βρω χρόνο να σου ετοιμάσω ενα πακέτο όπως αυτό εδω:
https://launchpad.net/~logari81/+archiv ... ld/1553477
Που θα σου ειναι πιο ευκολο και πιο ασφαλες. Αν τυχόν το ξεχασω υπενθυμισε μου το.

[perceval777]

Αν μου λυσεις το προβλημα σου ειμαι ευγνώμων θα περιμενω νεοτερα ...

[logari81]

Λοιπόν το πακέτο σου ειναι έτοιμο:
https://launchpad.net/~logari81/+archiv ... d1_all.deb

Δοκιμασε το σε καποιον υπολογιστη που έχει σύνδεση στο internet γιατι θα χρειαστεί να κατεβασει καποιες εξαρτησεις μαλλον. Περιμένω τα αποτελέσματα.

Σχετικά λινκς:
http://www.ralinktech.com/support.php?s=2
http://beautifuldiscovery.wordpress.com ... th-ubuntu/
http://github.com/dodamn/pkg-rt3070
https://launchpad.net/ubuntu/+ppas

[perceval777]

Φιλε μου εγκατέστησα το πακέτο σου... εγκατέστησα και το depend που μου ζητουσε http://packages.ubuntu.com/intrepid/all/dkms/download αλλα... τιποτα
δεν αλλαξε ! χχμμμ

[logari81]

Κάνε μια επαννεκκινηση και δώσε μου τα αποτελεσματα των εντολών:

Κώδικας: Επιλογή όλων

dmesg
lsmod
iwocnfig

[logari81]

Φιλε μου εγκατέστησα το πακέτο σου... εγκατέστησα και το depend που μου ζητουσε http://packages.ubuntu.com/intrepid/all/dkms/download αλλα... τιποτα
δεν αλλαξε ! χχμμμ

κατσε λίγο δεν σου ειπα να κατεβασεις κανενα πακετο, σου ειπα οτι θα το κατεβασει μονο του. Καταρχην τι εκδοση Ubuntu έχεις;

[perceval777]

Εχω την 10,04 σου υπενθυμιζω πως το μηχανημα δεν γινεται να συνδεθει με αλλο τροπο στο ιντερνετ ... τα αποτελεσματα των εντολων ειναι :

dmesg

Κώδικας: Επιλογή όλων

fffff
[ 0.255847] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.255849] pci 0000:00:1c.4: IO window: 0xe000-0xefff
[ 0.255853] pci 0000:00:1c.4: MEM window: 0xfeb00000-0xfebfffff
[ 0.255857] pci 0000:00:1c.4: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.255862] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.255864] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 0.255868] pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff
[ 0.255872] pci 0000:00:1c.5: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.255877] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.255879] pci 0000:00:1e.0: IO window: disabled
[ 0.255882] pci 0000:00:1e.0: MEM window: disabled
[ 0.255886] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.255900] alloc irq_desc for 16 on node -1
[ 0.255902] alloc kstat_irqs on node -1
[ 0.255908] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.255911] pci 0000:00:01.0: setting latency timer to 64
[ 0.255917] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.255920] alloc irq_desc for 17 on node -1
[ 0.255922] alloc kstat_irqs on node -1
[ 0.255924] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.255928] pci 0000:00:1c.0: setting latency timer to 64
[ 0.255935] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.255938] pci 0000:00:1c.4: setting latency timer to 64
[ 0.255944] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.255948] pci 0000:00:1c.5: setting latency timer to 64
[ 0.255953] pci 0000:00:1e.0: setting latency timer to 64
[ 0.255957] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.255959] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.255961] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.255963] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.255965] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.255967] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.255969] pci_bus 0000:04: resource 1 mem: [0x80000000-0x803fffff]
[ 0.255971] pci_bus 0000:04: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.255973] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.255975] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.255977] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.255979] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.255981] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.255983] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff]
[ 0.255985] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.255987] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.256019] NET: Registered protocol family 2
[ 0.256100] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.256347] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.256726] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.256902] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.256904] TCP reno registered
[ 0.256965] NET: Registered protocol family 1
[ 0.257084] pci 0000:01:00.0: Boot video device
[ 0.257232] cpufreq-nforce2: No nForce2 chipset.
[ 0.257252] Scanning for low memory corruption every 60 seconds
[ 0.257333] audit: initializing netlink socket (disabled)
[ 0.257340] type=2000 audit(1273376091.255:1): initialized
[ 0.264875] highmem bounce pool size: 64 pages
[ 0.264879] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.266022] VFS: Disk quotas dquot_6.5.2
[ 0.266068] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.266500] fuse init (API version 7.13)
[ 0.266565] msgmni has been set to 1690
[ 0.266722] alg: No test for stdrng (krng)
[ 0.266762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.266764] io scheduler noop registered
[ 0.266766] io scheduler anticipatory registered
[ 0.266767] io scheduler deadline registered
[ 0.266798] io scheduler cfq registered (default)
[ 0.266909] alloc irq_desc for 24 on node -1
[ 0.266911] alloc kstat_irqs on node -1
[ 0.266918] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.266923] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.267002] alloc irq_desc for 25 on node -1
[ 0.267003] alloc kstat_irqs on node -1
[ 0.267009] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.267015] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.267112] alloc irq_desc for 26 on node -1
[ 0.267113] alloc kstat_irqs on node -1
[ 0.267119] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.267125] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.267218] alloc irq_desc for 27 on node -1
[ 0.267219] alloc kstat_irqs on node -1
[ 0.267225] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.267231] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.267297] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.267377] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.267461] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.267465] ACPI: Power Button [PWRB]
[ 0.267500] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.267502] ACPI: Power Button [PWRF]
[ 0.268061] ACPI: SSDT 7ff8e0d0 002B9 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.268438] ACPI: SSDT 7ff8e650 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.268712] Monitor-Mwait will be used to enter C-1 state
[ 0.268730] Monitor-Mwait will be used to enter C-2 state
[ 0.268734] Marking TSC unstable due to TSC halts in idle
[ 0.268769] processor LNXCPU:00: registered as cooling_device0
[ 0.269095] ACPI: SSDT 7ff8e390 002B9 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.269357] ACPI: SSDT 7ff8eb10 00085 (v01 PmRef P002Cst 00003000 INTL 20051117)
[ 0.269663] Switching to clocksource hpet
[ 0.271697] processor LNXCPU:01: registered as cooling_device1
[ 0.275074] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.275160] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.275494] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.276332] brd: module loaded
[ 0.276684] loop: module loaded
[ 0.276744] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.276813] ata_piix 0000:00:1f.2: version 2.13
[ 0.276827] alloc irq_desc for 19 on node -1
[ 0.276829] alloc kstat_irqs on node -1
[ 0.276833] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.276837] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.276871] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.276915] scsi0 : ata_piix
[ 0.276969] scsi1 : ata_piix
[ 0.278032] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.278036] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.278053] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.278056] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.278084] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.278111] scsi2 : ata_piix
[ 0.278150] scsi3 : ata_piix
[ 0.279011] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.279014] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.279062] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.279085] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 0.279095] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 0.279162] isapnp: Scanning for PnP cards...
[ 0.279321] Fixed MDIO Bus: probed
[ 0.279346] PPP generic driver version 2.4.2
[ 0.279375] tun: Universal TUN/TAP device driver, 1.6
[ 0.279376] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.279441] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.279453] alloc irq_desc for 18 on node -1
[ 0.279455] alloc kstat_irqs on node -1
[ 0.279458] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.279467] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.279470] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.279494] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.279513] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.283390] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.283400] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fe000
[ 0.325718] Freeing initrd memory: 7767k freed
[ 0.330747] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.330872] usb usb1: configuration #1 chosen from 1 choice
[ 0.330896] hub 1-0:1.0: USB hub found
[ 0.330904] hub 1-0:1.0: 6 ports detected
[ 0.330962] alloc irq_desc for 23 on node -1
[ 0.330964] alloc kstat_irqs on node -1
[ 0.330970] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.330985] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.330988] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.331015] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.331038] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.334934] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.334989] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fc000
[ 0.352008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.352071] usb usb2: configuration #1 chosen from 1 choice
[ 0.352092] hub 2-0:1.0: USB hub found
[ 0.352097] hub 2-0:1.0: 6 ports detected
[ 0.352144] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.352159] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.352195] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.352201] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.352204] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.352226] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.352251] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.352317] usb usb3: configuration #1 chosen from 1 choice
[ 0.352336] hub 3-0:1.0: USB hub found
[ 0.352345] hub 3-0:1.0: 2 ports detected
[ 0.352378] alloc irq_desc for 21 on node -1
[ 0.352379] alloc kstat_irqs on node -1
[ 0.352383] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.352387] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.352389] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.352412] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.352438] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.352507] usb usb4: configuration #1 chosen from 1 choice
[ 0.352525] hub 4-0:1.0: USB hub found
[ 0.352530] hub 4-0:1.0: 2 ports detected
[ 0.352562] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.352567] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.352569] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.352596] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.352615] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.352680] usb usb5: configuration #1 chosen from 1 choice
[ 0.352698] hub 5-0:1.0: USB hub found
[ 0.352705] hub 5-0:1.0: 2 ports detected
[ 0.352740] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.352744] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.352747] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.352771] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.352790] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.352854] usb usb6: configuration #1 chosen from 1 choice
[ 0.352872] hub 6-0:1.0: USB hub found
[ 0.352877] hub 6-0:1.0: 2 ports detected
[ 0.352908] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.352913] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.352915] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.352939] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.352959] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.353021] usb usb7: configuration #1 chosen from 1 choice
[ 0.353040] hub 7-0:1.0: USB hub found
[ 0.353045] hub 7-0:1.0: 2 ports detected
[ 0.353078] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.353082] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.353085] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.353108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.353127] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.353190] usb usb8: configuration #1 chosen from 1 choice
[ 0.353208] hub 8-0:1.0: USB hub found
[ 0.353213] hub 8-0:1.0: 2 ports detected
[ 0.353295] PNP: No PS/2 controller found. Probing ports directly.
[ 0.356077] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.356081] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.356172] mice: PS/2 mouse device common for all mice
[ 0.356271] rtc_cmos 00:03: RTC can wake from S4
[ 0.356301] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.356323] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.356399] device-mapper: uevent: version 1.0.3
[ 0.356466] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.356512] device-mapper: multipath: version 1.1.0 loaded
[ 0.356515] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.356596] EISA: Probing bus 0 at eisa.0
[ 0.356600] Cannot allocate resource for EISA slot 1
[ 0.356617] EISA: Detected 0 cards.
[ 0.356708] cpuidle: using governor ladder
[ 0.356773] cpuidle: using governor menu
[ 0.357112] TCP cubic registered
[ 0.357224] NET: Registered protocol family 10
[ 0.357587] lo: Disabled Privacy Extensions
[ 0.357841] NET: Registered protocol family 17
[ 0.358296] Using IPI No-Shortcut mode
[ 0.358347] PM: Resume from disk failed.
[ 0.358356] registered taskstats version 1
[ 0.358711] Magic number: 10:14:563
[ 0.358716] platform Fixed MDIO bus.0: hash matches
[ 0.358777] rtc_cmos 00:03: setting system clock to 2010-05-09 03:34:52 UTC (1273376092)
[ 0.358779] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.358780] EDD information not available.
[ 0.636455] isapnp: No Plug & Play device found
[ 0.666567] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.677113] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.732030] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 0.867148] usb 1-2: configuration #1 chosen from 1 choice
[ 0.976028] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.120073] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.120085] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.125593] usb 2-1: configuration #1 chosen from 1 choice
[ 1.129347] ata1.00: ATA-8: WDC WD5000AAKS-22A7B2, 01.03B01, max UDMA/133
[ 1.129352] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.144108] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.144126] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.144135] ata2.01: link offline, clearing class 3 to NONE
[ 1.145411] ata1.00: configured for UDMA/133
[ 1.145523] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5
[ 1.145614] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.145616] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.145652] sd 0:0:0:0: [sda] Write Protect is off
[ 1.145654] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.145672] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.145776] sda: sda1 sda2 <
[ 1.152212] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
[ 1.162525] sda5
[ 1.168220] ata2.00: configured for UDMA/100
[ 1.169738] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5
[ 1.173364] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.173368] Uniform CD-ROM driver Revision: 3.20
[ 1.173469] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.173499] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.179850] sda6 >
[ 1.180120] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.180129] Freeing unused kernel memory: 656k freed
[ 1.180403] Write protecting the kernel text: 4676k
[ 1.180436] Write protecting the kernel read-only data: 1840k
[ 1.192342] udev: starting version 151
[ 1.239983] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.240015] pata_jmicron 0000:03:00.0: setting latency timer to 64
[ 1.250005] scsi4 : pata_jmicron
[ 1.253684] scsi5 : pata_jmicron
[ 1.254171] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.254187] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.254221] r8169 0000:02:00.0: setting latency timer to 64
[ 1.254266] alloc irq_desc for 28 on node -1
[ 1.254268] alloc kstat_irqs on node -1
[ 1.254280] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[ 1.254354] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.254357] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[ 1.255005] eth0: RTL8168c/8111c at 0xf804c000, 00:23:54:5e:4c:fe, XID 1c4000c0 IRQ 28
[ 1.284571] Initializing USB Mass Storage driver...
[ 1.285999] Floppy drive(s): fd0 is 1.44M
[ 1.289380] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.289526] usbcore: registered new interface driver usb-storage
[ 1.289528] USB Mass Storage support registered.
[ 1.289533] usb-storage: device found at 3
[ 1.289534] usb-storage: waiting for device to settle before scanning
[ 1.304174] FDC 0 is a post-1991 82077
[ 1.348032] usb 2-4: new high speed USB device using ehci_hcd and address 5
[ 1.481251] usb 2-4: configuration #1 chosen from 1 choice
[ 1.482045] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1.482138] usb-storage: device found at 5
[ 1.482140] usb-storage: waiting for device to settle before scanning
[ 1.586293] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 1.720031] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.899386] usb 3-1: configuration #1 chosen from 1 choice
[ 2.140027] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 2.322932] usb 6-2: configuration #1 chosen from 1 choice
[ 2.564041] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 2.746097] usb 7-1: configuration #1 chosen from 1 choice
[ 6.288256] usb-storage: device scan complete
[ 6.288787] scsi 6:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 6.289201] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.289726] sd 6:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 6.290223] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.290226] sd 6:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 6.290229] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.292225] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.292229] sdb: sdb1
[ 6.294602] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.294606] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.480194] usb-storage: device scan complete
[ 6.480689] scsi 7:0:0:0: Direct-Access WD 10EADS External 1.75 PQ: 0 ANSI: 4
[ 6.481009] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 6.481539] sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.482045] sd 7:0:0:0: [sdc] Write Protect is off
[ 6.482049] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 6.482052] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 6.483175] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 6.483178] sdc: sdc1
[ 6.501673] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 6.501677] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 7.530420] udev: starting version 151
[ 7.549635] Adding 6037496k swap on /dev/sda6. Priority:-1 extents:1 across:6037496k
[ 7.610443] Linux agpgart interface v0.103
[ 7.754955] [drm] Initialized drm 1.1.0 20060810
[ 7.767883] usbcore: registered new interface driver hiddev
[ 7.769341] parport_pc 00:07: reported by Plug and Play ACPI
[ 7.769449] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 7.774294] lp: driver loaded but no devices found
[ 7.785354] input: Logitech Logitech(R) Precision(TM) Gamepad as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 7.785420] generic-usb 0003:046D:C21A.0001: input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech(R) Precision(TM) Gamepad] on usb-0000:00:1a.0-1/input0
[ 7.800059] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4
[ 7.800140] generic-usb 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2/input0
[ 7.813143] type=1505 audit(1273365299.953:2): operation="profile_load" pid=659 name="/sbin/dhclient3"
[ 7.813652] type=1505 audit(1273365299.953:3): operation="profile_load" pid=659 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 7.813946] type=1505 audit(1273365299.953:4): operation="profile_load" pid=659 name="/usr/lib/connman/scripts/dhclient-script"
[ 7.814204] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input5
[ 7.814273] generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1/input0
[ 7.814296] ppdev: user-space parallel port driver
[ 7.824163] [drm] radeon defaulting to kernel modesetting.
[ 7.824165] [drm] radeon kernel modesetting enabled.
[ 7.824206] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.824211] radeon 0000:01:00.0: setting latency timer to 64
[ 7.825244] [drm] radeon: Initializing kernel modesetting.
[ 7.831038] [drm] register mmio base: 0xFE9E0000
[ 7.831040] [drm] register mmio size: 65536
[ 7.831099] ATOM BIOS:
[ 7.831111] [drm] Clocks initialized !
[ 7.831835] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.831838] [drm] RAM width 128bits DDR
[ 7.834699] [TTM] Zone kernel: Available graphics memory: 436872 kiB.
[ 7.834701] [TTM] Zone highmem: Available graphics memory: 1030540 kiB.
[ 7.834713] [drm] radeon: 256M of VRAM memory ready
[ 7.834715] [drm] radeon: 512M of GTT memory ready.
[ 7.834752] alloc irq_desc for 29 on node -1
[ 7.834753] alloc kstat_irqs on node -1
[ 7.834762] radeon 0000:01:00.0: irq 29 for MSI/MSI-X
[ 7.834767] [drm] radeon: using MSI.
[ 7.834792] [drm] radeon: irq initialized.
[ 7.834795] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.835037] [drm] Loading RV730 Microcode
[ 7.835040] platform radeon_cp.0: firmware: requesting radeon/RV730_pfp.bin
[ 7.837778] platform radeon_cp.0: firmware: requesting radeon/RV730_me.bin
[ 7.839112] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input6
[ 7.839184] generic-usb 0003:045E:00DD.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1/input1
[ 7.839206] usbcore: registered new interface driver usbhid
[ 7.839208] usbhid: v2.6:USB HID core driver
[ 7.842623] platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin
[ 7.865985] lp0: using parport0 (interrupt-driven).
[ 7.927989] alloc irq_desc for 22 on node -1
[ 7.927992] alloc kstat_irqs on node -1
[ 7.927998] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.928021] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.929289] [drm] ring test succeeded in 1 usecs
[ 7.929418] [drm] radeon: ib pool ready.
[ 7.929481] [drm] ib test succeeded in 0 usecs
[ 7.929809] [drm] Default TV standard: PAL
[ 7.930162] [drm] Radeon Display Connectors
[ 7.930164] [drm] Connector 0:
[ 7.930165] [drm] DVI-I
[ 7.930166] [drm] HPD2
[ 7.930168] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 7.930170] [drm] Encoders:
[ 7.930171] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.930172] [drm] DFP2: INTERNAL_UNIPHY1
[ 7.930174] [drm] Connector 1:
[ 7.930175] [drm] DIN
[ 7.930176] [drm] Encoders:
[ 7.930177] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.930178] [drm] Connector 2:
[ 7.930179] [drm] DVI-I
[ 7.930180] [drm] HPD1
[ 7.930182] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 7.930184] [drm] Encoders:
[ 7.930185] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.930186] [drm] DFP1: INTERNAL_UNIPHY
[ 8.025185] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.063159] type=1505 audit(1273365300.201:5): operation="profile_load" pid=879 name="/usr/share/gdm/guest-session/Xsession"
[ 8.064465] type=1505 audit(1273365300.205:6): operation="profile_replace" pid=880 name="/sbin/dhclient3"
[ 8.064981] type=1505 audit(1273365300.205:7): operation="profile_replace" pid=880 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 8.065259] type=1505 audit(1273365300.205:8): operation="profile_replace" pid=880 name="/usr/lib/connman/scripts/dhclient-script"
[ 8.067639] type=1505 audit(1273365300.205:9): operation="profile_load" pid=881 name="/usr/bin/evince"
[ 8.070846] [drm] fb mappable at 0xE0141000
[ 8.070848] [drm] vram apper at 0xE0000000
[ 8.070850] [drm] size 7257600
[ 8.070851] [drm] fb depth is 24
[ 8.070852] [drm] pitch is 6912
[ 8.070923] fb0: radeondrmfb frame buffer device
[ 8.070925] registered panic notifier
[ 8.070931] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 8.070972] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.070998] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 8.072417] vga16fb: initializing
[ 8.072420] vga16fb: mapped to 0xc00a0000
[ 8.072422] vga16fb: not registering due to another framebuffer present
[ 8.079810] type=1505 audit(1273365300.217:10): operation="profile_load" pid=881 name="/usr/bin/evince-previewer"
[ 8.084620] type=1505 audit(1273365300.225:11): operation="profile_load" pid=881 name="/usr/bin/evince-thumbnailer"
[ 8.088584] r8169: eth0: link down
[ 8.088728] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.095111] Console: switching to colour frame buffer device 210x65
[ 10.113203] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 32.620538] end_request: I/O error, dev fd0, sector 0
[ 44.792696] end_request: I/O error, dev fd0, sector 0
[ 62.467370] usb 1-2: USB disconnect, address 3
[ 63.468030] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 63.602454] usb 1-2: configuration #1 chosen from 1 choice
[ 63.602905] scsi8 : SCSI emulation for USB Mass Storage devices
[ 63.603014] usb-storage: device found at 4
[ 63.603016] usb-storage: waiting for device to settle before scanning
[ 68.600270] usb-storage: device scan complete
[ 68.600752] scsi 8:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 68.603422] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 68.604279] sd 8:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 68.604731] sd 8:0:0:0: [sdb] Write Protect is off
[ 68.604735] sd 8:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 68.604738] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 68.606976] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 68.606981] sdb: sdb1
[ 68.609223] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 68.609227] sd 8:0:0:0: [sdb] Attached SCSI removable disk

lsmod

Κώδικας: Επιλογή όλων

Module Size Used by
nls_iso8859_1 3249 1
nls_cp437 4919 1
vfat 8901 1
fat 47767 1 vfat
binfmt_misc 6587 1
snd_hda_codec_atihdmi 2367 1
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_hda_codec_realtek 203168 1
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_hda_intel 21877 2
snd_hda_codec 74201 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm 70662 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
joydev 8708 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
radeon 674135 3
ppdev 5259 0
snd 54148 16 snd_hda_codec_realtek,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ttm 49943 1 radeon
drm_kms_helper 29297 1 radeon
parport_pc 25962 1
asus_atk0110 9017 0
lp 7028 0
usbhid 36110 0
hid 67032 1 usbhid
psmouse 63245 0
serio_raw 3978 0
drm 162471 5 radeon,ttm,drm_kms_helper
soundcore 6620 1 snd
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
i2c_algo_bit 5028 1 radeon
parport 32635 3 ppdev,parport_pc,lp
intel_agp 24177 0
agpgart 31724 3 ttm,drm,intel_agp
floppy 53016 0
usb_storage 39425 1
r8169 33884 0
mii 4381 1 r8169
pata_jmicron 1843 0

iwocnfig

Κώδικας: Επιλογή όλων

iwocnfig

lo no wireless extensions.

eth0 no wireless extensions.


[logari81]

τι σου βγαζει η εντολή

Κώδικας: Επιλογή όλων

sudo modprobe rt3070sta

[perceval777]

Κώδικας: Επιλογή όλων

vaios@vaios-desktop:~$ sudo modprobe rt3070sta
[sudo] password for vaios:
WARNING: All config files need .conf: /etc/modprobe.d/dkms, it will be ignored in a future release.
vaios@vaios-desktop:~$