Πως κανω εγκατασταση ασυρματης USB καρτας δικτυου

[EnCodeR]

Καλησπέρα σε όλους έχω το εξής πρόβλημα:
Έχω αυτή την ασυρματη usb κάρτα :
http://www.media-tech.eu/page.php?do=de ... 871&kid=16
αλλά δεν κατάφερα να την κάνω εγκατάσταση (είμαι νέος στο linux ) και χρειάζομαι βοήθεια παρακαλώ,
έχω ubuntu ultimate 2.7 x86 θα ηθελα τη βοηθεια σας να την εγκαταστησω.

Ευχαριστω εκ των προτερων

[xaris2335]

Καλησπέρα και καλώς ήρθες στην κοινότητα του Ubuntu
Για δώσε το αποτέλεσμα απο τις εντολές μία μία

Κώδικας: Επιλογή όλων

iwconfig
sudo iwlist scan
lsusb
lsmod
dmesg

[EnCodeR]

iwconfig

Κώδικας: Επιλογή όλων

encoder@encoder-pc:~$ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.




sudo iwlist scan

Κώδικας: Επιλογή όλων

encoder@encoder-pc:~$ sudo iwlist scan
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.



lsusb

Κώδικας: Επιλογή όλων

encoder@encoder-pc:~$ sudo lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:8171 Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsmod

Κώδικας: Επιλογή όλων

encoder@encoder-pc:~$ sudo lsmod
Module Size Used by
binfmt_misc 6587 1
ppdev 5259 0
kvm_amd 29260 0
kvm 245405 1 kvm_amd
clip 9438 1
atm 35745 3 clip
dm_crypt 11331 0
snd_hda_codec_atihdmi 2367 1
snd_hda_codec_realtek 203170 1
snd_hda_intel 22005 2
snd_hda_codec 74201 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70886 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 54148 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6620 1 snd
fglrx 2093229 35
psmouse 63245 0
snd_page_alloc 7172 2 snd_hda_intel,snd_pcm
i2c_nforce2 5295 0
agpgart 31788 1 fglrx
lp 7028 0
serio_raw 3978 0
shpchp 28884 0
asus_atk0110 9017 0
parport 32635 2 ppdev,lp
dm_raid45 81647 0
xor 15028 1 dm_raid45
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
ohci1394 27238 0
vga16fb 11385 1
video 17375 0
vgastate 8961 1 vga16fb
output 1871 1 video
forcedeth 49844 0
ieee1394 81213 1 ohci1394
ahci 32040 2
pata_amd 8766 0
ramzswap 6362 1
xvmalloc 4074 1 ramzswap
lzo_decompress 2189 1 ramzswap
lzo_compress 1853 1 ramzswap


dmesg

Κώδικας: Επιλογή όλων

[ 0.451838] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.452027] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.452220] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
[ 0.452405] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.452593] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.452779] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.452965] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.453149] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.453334] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.453518] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.453703] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.453888] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.454073] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.454258] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.454443] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.454628] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.454814] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.454999] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.455188] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
[ 0.455375] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.455562] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[ 0.455750] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.455934] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.456127] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.456320] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.456508] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.456726] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.456916] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[ 0.457104] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.457188] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.457190] vgaarb: loaded
[ 0.457253] SCSI subsystem initialized
[ 0.457291] libata version 3.00 loaded.
[ 0.457291] usbcore: registered new interface driver usbfs
[ 0.457291] usbcore: registered new interface driver hub
[ 0.457291] usbcore: registered new device driver usb
[ 0.457291] ACPI: WMI: Mapper loaded
[ 0.457291] PCI: Using ACPI for IRQ routing
[ 0.457291] NetLabel: Initializing
[ 0.457291] NetLabel: domain hash size = 128
[ 0.457291] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.457291] NetLabel: unlabeled traffic allowed by default
[ 0.457291] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.457291] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.468010] Switching to clocksource tsc
[ 0.468950] AppArmor: AppArmor Filesystem Enabled
[ 0.468958] pnp: PnP ACPI init
[ 0.468967] ACPI: bus type pnp registered
[ 0.473902] pnp: PnP ACPI: found 14 devices
[ 0.473904] ACPI: ACPI bus type pnp unregistered
[ 0.473906] PnPBIOS: Disabled by ACPI PNP
[ 0.473913] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.473915] system 00:04: ioport range 0x800-0x80f has been reserved
[ 0.473917] system 00:04: ioport range 0x500-0x57f has been reserved
[ 0.473919] system 00:04: ioport range 0x580-0x5ff has been reserved
[ 0.473921] system 00:04: ioport range 0x800-0x87f could not be reserved
[ 0.473922] system 00:04: ioport range 0x880-0x8ff has been reserved
[ 0.473924] system 00:04: ioport range 0xd00-0xd7f has been reserved
[ 0.473926] system 00:04: ioport range 0xd80-0xdff has been reserved
[ 0.473928] system 00:04: iomem range 0xfed04000-0xfed04fff has been reserved
[ 0.473930] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.473934] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.473936] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.473939] system 00:0a: ioport range 0x230-0x23f has been reserved
[ 0.473941] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 0.473943] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 0.473945] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 0.473948] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.473951] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.473953] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.473955] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.473957] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.473959] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.508626] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.508628] pci 0000:00:08.0: IO window: disabled
[ 0.508630] pci 0000:00:08.0: MEM window: disabled
[ 0.508632] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.508636] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 0.508638] pci 0000:03:00.0: IO window: 0xd000-0xdfff
[ 0.508641] pci 0000:03:00.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.508644] pci 0000:03:00.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.508648] pci 0000:03:02.0: PCI bridge, secondary bus 0000:05
[ 0.508649] pci 0000:03:02.0: IO window: disabled
[ 0.508651] pci 0000:03:02.0: MEM window: disabled
[ 0.508654] pci 0000:03:02.0: PREFETCH window: disabled
[ 0.508657] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 0.508659] pci 0000:02:00.0: IO window: 0xd000-0xdfff
[ 0.508662] pci 0000:02:00.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.508664] pci 0000:02:00.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.508668] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[ 0.508672] pci 0000:00:10.0: IO window: 0xd000-0xdfff
[ 0.508681] pci 0000:00:10.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.508687] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.508699] pci 0000:00:13.0: PCI bridge, secondary bus 0000:06
[ 0.508700] pci 0000:00:13.0: IO window: disabled
[ 0.508709] pci 0000:00:13.0: MEM window: disabled
[ 0.508715] pci 0000:00:13.0: PREFETCH window: disabled
[ 0.508726] pci 0000:00:14.0: PCI bridge, secondary bus 0000:07
[ 0.508730] pci 0000:00:14.0: IO window: 0xe000-0xefff
[ 0.508739] pci 0000:00:14.0: MEM window: 0xfbf00000-0xfbffffff
[ 0.508745] pci 0000:00:14.0: PREFETCH window: disabled
[ 0.508760] pci 0000:00:08.0: setting latency timer to 64
[ 0.509036] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.509039] alloc irq_desc for 19 on node -1
[ 0.509040] alloc kstat_irqs on node -1
[ 0.509047] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 0.509054] pci 0000:00:10.0: setting latency timer to 64
[ 0.509061] pci 0000:02:00.0: setting latency timer to 64
[ 0.509066] pci 0000:03:00.0: setting latency timer to 64
[ 0.509071] pci 0000:03:02.0: setting latency timer to 64
[ 0.509336] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18
[ 0.509337] alloc irq_desc for 18 on node -1
[ 0.509338] alloc kstat_irqs on node -1
[ 0.509344] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18
[ 0.509351] pci 0000:00:13.0: setting latency timer to 64
[ 0.509617] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17
[ 0.509619] alloc irq_desc for 17 on node -1
[ 0.509620] alloc kstat_irqs on node -1
[ 0.509625] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17
[ 0.509632] pci 0000:00:14.0: setting latency timer to 64
[ 0.509637] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.509638] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.509641] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.509642] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.509644] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.509645] pci_bus 0000:02: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.509647] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.509649] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.509650] pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.509652] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.509653] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.509655] pci_bus 0000:04: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.509656] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.509658] pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
[ 0.509659] pci_bus 0000:07: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.509684] NET: Registered protocol family 2
[ 0.509743] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.509936] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.510306] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.510490] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.510491] TCP reno registered
[ 0.510539] NET: Registered protocol family 1
[ 0.510726] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.510824] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.510927] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.511107] pci 0000:04:00.0: Boot video device
[ 0.511310] cpufreq-nforce2: No nForce2 chipset.
[ 0.511324] Scanning for low memory corruption every 60 seconds
[ 0.511385] audit: initializing netlink socket (disabled)
[ 0.511390] type=2000 audit(1276947947.507:1): initialized
[ 0.517007] highmem bounce pool size: 64 pages
[ 0.517010] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.517802] VFS: Disk quotas dquot_6.5.2
[ 0.517834] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.518145] fuse init (API version 7.13)
[ 0.518190] msgmni has been set to 1610
[ 0.518359] alg: No test for stdrng (krng)
[ 0.518391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.518393] io scheduler noop registered
[ 0.518394] io scheduler anticipatory registered
[ 0.518395] io scheduler deadline registered
[ 0.518418] io scheduler cfq registered (default)
[ 0.518690] alloc irq_desc for 24 on node -1
[ 0.518691] alloc kstat_irqs on node -1
[ 0.518708] pcieport 0000:00:10.0: irq 24 for MSI/MSI-X
[ 0.518726] pcieport 0000:00:10.0: setting latency timer to 64
[ 0.519084] alloc irq_desc for 25 on node -1
[ 0.519085] alloc kstat_irqs on node -1
[ 0.519100] pcieport 0000:00:13.0: irq 25 for MSI/MSI-X
[ 0.519117] pcieport 0000:00:13.0: setting latency timer to 64
[ 0.519464] alloc irq_desc for 26 on node -1
[ 0.519465] alloc kstat_irqs on node -1
[ 0.519480] pcieport 0000:00:14.0: irq 26 for MSI/MSI-X
[ 0.519497] pcieport 0000:00:14.0: setting latency timer to 64
[ 0.519703] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.519715] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.519774] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.519777] ACPI: Power Button [PWRB]
[ 0.519810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.519812] ACPI: Power Button [PWRF]
[ 0.520068] processor LNXCPU:00: registered as cooling_device0
[ 0.520085] processor LNXCPU:01: registered as cooling_device1
[ 0.520102] processor LNXCPU:02: registered as cooling_device2
[ 0.520119] processor LNXCPU:03: registered as cooling_device3
[ 0.524260] isapnp: Scanning for PnP cards...
[ 0.525008] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.525091] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.525309] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.525831] brd: module loaded
[ 0.526074] loop: module loaded
[ 0.526119] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.526221] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.526504] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.526506] alloc irq_desc for 23 on node -1
[ 0.526507] alloc kstat_irqs on node -1
[ 0.526514] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.526523] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 0.526527] pata_acpi 0000:00:09.0: PCI INT A disabled
[ 0.526683] Fixed MDIO Bus: probed
[ 0.526704] PPP generic driver version 2.4.2
[ 0.526724] tun: Universal TUN/TAP device driver, 1.6
[ 0.526725] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.526770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.527032] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.527034] alloc irq_desc for 22 on node -1
[ 0.527035] alloc kstat_irqs on node -1
[ 0.527040] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.527048] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.527050] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.527066] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.527081] ehci_hcd 0000:00:02.1: debug port 1
[ 0.527088] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.527104] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfbd7fc00
[ 0.535820] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.535886] usb usb1: configuration #1 chosen from 1 choice
[ 0.535903] hub 1-0:1.0: USB hub found
[ 0.535908] hub 1-0:1.0: 6 ports detected
[ 0.536208] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[ 0.536210] alloc irq_desc for 21 on node -1
[ 0.536212] alloc kstat_irqs on node -1
[ 0.536218] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[ 0.536226] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.536228] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.536246] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.536259] ehci_hcd 0000:00:04.1: debug port 1
[ 0.536265] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.536280] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfbd7f800
[ 0.547820] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.547870] usb usb2: configuration #1 chosen from 1 choice
[ 0.547891] hub 2-0:1.0: USB hub found
[ 0.547896] hub 2-0:1.0: 6 ports detected
[ 0.547929] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.548202] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.548204] alloc irq_desc for 20 on node -1
[ 0.548205] alloc kstat_irqs on node -1
[ 0.548211] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.548219] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.548221] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.548239] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.548258] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfbd7e000
[ 0.566903] Freeing initrd memory: 13393k freed
[ 0.605892] usb usb3: configuration #1 chosen from 1 choice
[ 0.605909] hub 3-0:1.0: USB hub found
[ 0.605916] hub 3-0:1.0: 6 ports detected
[ 0.606241] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[ 0.606244] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
[ 0.606256] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.606258] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.606279] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.606302] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfbd7d000
[ 0.661859] usb usb4: configuration #1 chosen from 1 choice
[ 0.661873] hub 4-0:1.0: USB hub found
[ 0.661878] hub 4-0:1.0: 6 ports detected
[ 0.661913] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.661964] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.662386] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.662391] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.662431] mice: PS/2 mouse device common for all mice
[ 0.662490] rtc_cmos 00:06: RTC can wake from S4
[ 0.662511] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.662563] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.662617] device-mapper: uevent: version 1.0.3
[ 0.662701] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.662777] device-mapper: multipath: version 1.1.0 loaded
[ 0.662779] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.662843] EISA: Probing bus 0 at eisa.0
[ 0.662865] EISA: Detected 0 cards.
[ 0.662969] cpuidle: using governor ladder
[ 0.662970] cpuidle: using governor menu
[ 0.663223] TCP cubic registered
[ 0.663304] NET: Registered protocol family 10
[ 0.663565] lo: Disabled Privacy Extensions
[ 0.663743] NET: Registered protocol family 17
[ 0.663777] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor processors (4 cpu cores) (version 2.20.00)
[ 0.663803] powernow-k8: 0 : pstate 0 (3400 MHz)
[ 0.663804] powernow-k8: 1 : pstate 1 (2700 MHz)
[ 0.663805] powernow-k8: 2 : pstate 2 (2200 MHz)
[ 0.663806] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.678608] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.747481] Using IPI No-Shortcut mode
[ 0.747539] PM: Resume from disk failed.
[ 0.747546] registered taskstats version 1
[ 0.748039] Magic number: 14:827:782
[ 0.748062] pci_express 0000:00:13.0:pcie01: hash matches
[ 0.748143] rtc_cmos 00:06: setting system clock to 2010-06-19 11:45:48 UTC (1276947948)
[ 0.748145] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.748146] EDD information not available.
[ 0.877996] isapnp: No Plug & Play device found
[ 0.878018] Freeing unused kernel memory: 672k freed
[ 0.878226] Write protecting the kernel text: 4828k
[ 0.878265] Write protecting the kernel read-only data: 1876k
[ 0.896881] ramzswap: disk size set to 2060648 kB
[ 0.900650] udev: starting version 151
[ 0.909495] Adding 2060644k swap on /dev/ramzswap0. Priority:100 extents:1 across:2060644k SS
[ 0.913718] pata_amd 0000:00:06.0: version 0.4.1
[ 0.913749] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.919288] scsi0 : pata_amd
[ 0.933427] scsi1 : pata_amd
[ 0.934119] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.934121] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.934161] ahci 0000:00:09.0: version 3.0
[ 0.934169] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.934199] alloc irq_desc for 27 on node -1
[ 0.934201] alloc kstat_irqs on node -1
[ 0.934207] ahci 0000:00:09.0: irq 27 for MSI/MSI-X
[ 0.934255] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 0.934257] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh
[ 0.934260] ahci 0000:00:09.0: setting latency timer to 64
[ 0.938271] scsi2 : ahci
[ 0.938327] scsi3 : ahci
[ 0.938396] scsi4 : ahci
[ 0.938518] scsi5 : ahci
[ 0.938557] scsi6 : ahci
[ 0.938596] scsi7 : ahci
[ 0.938685] ata3: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76100 irq 27
[ 0.938687] ata4: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76180 irq 27
[ 0.938689] ata5: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76200 irq 27
[ 0.938691] ata6: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76280 irq 27
[ 0.938692] ata7: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76300 irq 27
[ 0.938694] ata8: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76380 irq 27
[ 0.938743] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.939046] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 0.939050] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 0.939053] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.000883] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:26:18:9f:92:0e
[ 1.000886] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 1.099054] ata2: port disabled. ignoring.
[ 1.256029] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.256045] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.256064] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.256091] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.420019] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.420029] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.421535] ata3.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[ 1.421537] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.421669] ata4.00: ATAPI: HL-DT-STDVD-RAM GH22LS30, 2.00, max UDMA/100, ATAPI AN
[ 1.422598] ata3.00: configured for UDMA/133
[ 1.422674] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[ 1.422779] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.422787] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.422804] sd 2:0:0:0: [sda] Write Protect is off
[ 1.422806] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.422820] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.422900] sda:
[ 1.423369] ata4.00: configured for UDMA/100
[ 1.424773] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22LS30 2.00 PQ: 0 ANSI: 5
[ 1.428102] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.428104] Uniform CD-ROM driver Revision: 3.20
[ 1.428168] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.428201] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.429420] sda1 sda2 < sda5 >
[ 1.456099] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.458067] vga16fb: initializing
[ 1.458070] vga16fb: mapped to 0xc00a0000
[ 1.458099] fb0: VGA16 VGA frame buffer device
[ 1.459688] ohci1394 0000:07:00.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17
[ 1.459692] ohci1394 0000:07:00.0: setting latency timer to 64
[ 1.522542] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fbfff800-fbffffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.601971] Console: switching to colour frame buffer device 80x30
[ 1.794731] xor: automatically using best checksumming function: pIII_sse
[ 1.812001] pIII_sse : 13653.000 MB/sec
[ 1.812003] xor: using function: pIII_sse (13653.000 MB/sec)
[ 1.813519] device-mapper: dm-raid45: initialized v0.2594b
[ 2.010054] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 2.796122] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001ff0a13]
[ 3.885790] Adding 9828344k swap on /dev/sda5. Priority:-1 extents:1 across:9828344k
[ 3.952159] udev: starting version 151
[ 4.906792] type=1505 audit(1276947952.655:2): operation="profile_load" pid=595 name="/sbin/dhclient3"
[ 4.906956] type=1505 audit(1276947952.655:3): operation="profile_load" pid=595 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 4.907047] type=1505 audit(1276947952.655:4): operation="profile_load" pid=595 name="/usr/lib/connman/scripts/dhclient-script"
[ 5.128518] type=1505 audit(1276947952.879:5): operation="profile_load" pid=640 name="/usr/sbin/ntpd"
[ 5.762207] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.817947] Linux agpgart interface v0.103
[ 5.818356] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 5.818360] ACPI: resource nForce2_smbus [0x700-0x73f] conflicts with ACPI region SM00 [0x700-0x73f]
[ 5.818362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.818363] nForce2_smbus 0000:00:01.1: Error probing SMB2.
[ 6.234564] psmouse serio1: ID: 10 00 64
[ 6.256219] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 6.256222] Disabling lock debugging due to kernel taint
[ 6.288314] lp: driver loaded but no devices found
[ 6.288544] logips2pp: Detected unknown logitech mouse model 127
[ 6.339946] [fglrx] Maximum main memory to use for locked dma buffers: 3861 MBytes.
[ 6.339984] [fglrx] vendor: 1002 device: 68b8 count: 1
[ 6.340395] [fglrx] ioport: bar 4, base 0xd800, size: 0x100
[ 6.340410] pci 0000:04:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 6.340414] pci 0000:04:00.0: setting latency timer to 64
[ 6.340627] [fglrx] Kernel PAT support is enabled
[ 6.340641] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors
[ 6.772600] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.602621] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 7.602899] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 7.602903] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 7.602905] hda_intel: Disable MSI for Nvidia chipset
[ 7.602922] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 8.541525] hda_codec: ALC1200: BIOS auto-probing.
[ 8.800068] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input5
[ 9.060394] ACPI: PCI Interrupt Link [LN0B] enabled at IRQ 16
[ 9.060398] alloc irq_desc for 16 on node -1
[ 9.060399] alloc kstat_irqs on node -1
[ 9.060407] HDA Intel 0000:04:00.1: PCI INT B -> Link[LN0B] -> GSI 16 (level, low) -> IRQ 16
[ 9.060437] HDA Intel 0000:04:00.1: setting latency timer to 64
[ 10.184082] type=1505 audit(1276947957.935:6): operation="profile_load" pid=965 name="/usr/share/gdm/guest-session/Xsession"
[ 10.184999] type=1505 audit(1276947957.935:7): operation="profile_replace" pid=966 name="/sbin/dhclient3"
[ 10.185169] type=1505 audit(1276947957.935:8): operation="profile_replace" pid=966 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.185263] type=1505 audit(1276947957.935:9): operation="profile_replace" pid=966 name="/usr/lib/connman/scripts/dhclient-script"
[ 10.516842] alloc irq_desc for 28 on node -1
[ 10.516844] alloc kstat_irqs on node -1
[ 10.516851] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X
[ 10.703991] type=1505 audit(1276947958.451:10): operation="profile_load" pid=967 name="/usr/bin/evince"
[ 10.706071] type=1505 audit(1276947958.455:11): operation="profile_load" pid=967 name="/usr/bin/evince-previewer"
[ 10.707363] type=1505 audit(1276947958.455:12): operation="profile_load" pid=967 name="/usr/bin/evince-thumbnailer"
[ 10.846337] type=1505 audit(1276947958.595:13): operation="profile_load" pid=1038 name="/usr/bin/freshclam"
[ 11.146987] type=1505 audit(1276947958.895:14): operation="profile_load" pid=1041 name="/usr/lib/cups/backend/cups-pdf"
[ 11.147193] type=1505 audit(1276947958.895:15): operation="profile_load" pid=1041 name="/usr/sbin/cupsd"
[ 11.749785] NET: Registered protocol family 8
[ 11.749787] NET: Registered protocol family 20
[ 13.162231] alloc irq_desc for 29 on node -1
[ 13.162233] alloc kstat_irqs on node -1
[ 13.162242] fglrx_pci 0000:04:00.0: irq 29 for MSI/MSI-X
[ 13.162682] [fglrx] Firegl kernel thread PID: 1119
[ 13.162924] [fglrx] IRQ 29 Enabled
[ 13.930692] kvm: Nested Virtualization enabled
[ 13.930695] kvm: Nested Paging enabled
[ 13.958091] [fglrx] Gart USWC size:1256 M.
[ 13.958093] [fglrx] Gart cacheable size:499 M.
[ 13.958097] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 13.958099] [fglrx] Reserved FB block: Unshared offset:f911000, size:3ef000
[ 13.958101] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 16.014776] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 18.520971] ppdev: user-space parallel port driver
[ 21.276524] eth0: no IPv6 routers present
[ 29.960203] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 386.208065] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 386.343563] usb 1-6: configuration #1 chosen from 1 choice


Ευχαριστ φίλε μου

[xaris2335]

Σου βρήκα μια λύση αλλά δεν είμαι σίγουρος.

Αν θες δοκίμασε την μέσα απο Live cd.
Η λύση

[EnCodeR]

Τον έχω τον driver αυτόν τον έχει και στο site του κατασκευαστή αλλα δεν καταφερα να το κάνω εγκατασταση μου εβγαζε σφαλμα

Κώδικας: Επιλογή όλων

encoder@encoder-pc:~/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_819
1_8192SU_usb_linux_v2.6.0006.20100202$ make
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.32-22-generic-pae/build M=/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-22-generic-pae'
CC [M] /home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/cmd/rtl871x_cmd.o
In file included from /home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/cmd/rtl871x_cmd.c:21:
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h: In function ‘thread_enter’:
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:361: error: implicit declaration of function ‘daemonize’
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:362: error: implicit declaration of function ‘allow_signal’
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:362: error: ‘SIGTERM’ undeclared (first use in this function)
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:362: error: (Each undeclared identifier is reported only once
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:362: error: for each function it appears in.)
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h: In function ‘flush_signals_thread’:
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:369: error: implicit declaration of function ‘signal_pending’
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:371: error: implicit declaration of function ‘flush_signals’
In file included from include/linux/usb.h:21,
from /home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_intf.h:13,
from /home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/rtl871x_io.h:7,
from /home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/drv_types.h:58,
from /home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/cmd/rtl871x_cmd.c:22:
include/linux/sched.h: At top level:
include/linux/sched.h:2037: warning: conflicting types for ‘flush_signals’
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:371: note: previous implicit declaration of ‘flush_signals’ was here
include/linux/sched.h:2151: warning: conflicting types for ‘daemonize’
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:361: note: previous implicit declaration of ‘daemonize’ was here
include/linux/sched.h:2349: error: static declaration of ‘signal_pending’ follows non-static declaration
/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/include/osdep_service.h:369: note: previous implicit declaration of ‘signal_pending’ was here
make[2]: *** [/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/cmd/rtl871x_cmd.o] Error 1
make[1]: *** [_module_/home/encoder/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-22-generic-pae'
make: *** [modules] Error 2
encoder@encoder-pc:~/Λήψεις/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver/rtl8712_8188_819
1_8192SU_usb_linux_v2.6.0006.20100202$ sudo make install
Makefile:12: /config: No such file or directory
make: *** No rule to make target `/config'. Stop.


Εδώ αυτό που μου βγάζει

Αν μπορούμε να κάνουμε κάτι θα ναι πολύ καλά

Ευχαριστώ

[EnCodeR]

Επίσης να τονίσω ότι δεν πήγαινε στο φακελο που ηθελα με την εντολη

Κώδικας: Επιλογή όλων

cd rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver


Μήπως κάνω κάτι λάθος δεν ξέρω

[EnCodeR]

Φίλε μου με αυτό τον τρόπο δούλεψε μια χαρά

Κώδικας: Επιλογή όλων

http://csiuo.com/drupal/content/installing-driver-hiro-h50193-wireless-usb-network-adapter-0bda8171-under-ubuntu-104

Να σαι καλά φίλε μου ευχαριστώ
SOLVED

[xaris2335]

Φτιάξε και την υπογραφή σου σε παρακαλώ, για να μπορούν να σε βοηθήσουν και άλλοι για αυτό το λέω.