Προβλημα με wireless adapter σε linux

[Fedil]

Καλησπερα. Μετα απο δυο χρονια καταφερα με βοηθεια φιλου να φτιαξουμε το παλιο μου λαπτοπ, ενα toshiba satelite m40. Στο δεσιμο ομως τις μητρικης που δεν το ανελαβα εγω, ξεχαστηκε να συνδεθει καλα το διακοπτακι που ανοιγει και κλεινει την ασυρματη καρτα δυκτιου.

Ειναι μανικη να τα ξανανοιξω παλι αλλα θα το κανω καποια αλλη στιγμη. Προς το παρων το λαπτοπ μπαινει ασυρματα στο δυκτιο με ενα usb wireless adapter linksys και με windows xp λογω οτι θα το χρησιμοποιει ο αδερφος μου που δεν ειναι fun του linux.

Για το συγκεκριμενο λαπτοπ εχω δυο σκληρους δισκους. Τον ενα δισκο του εχω windows για τον αδερφο μου και ο δευτερος σκεφτηκα να του βαλω μια ελαφρια διανομη linux.

Στην αρχη δοκιμασα με Lubuntu αλλα ενω στο network manager εβλεπε οτι υπηρχαν δυο ασυρματες καρτες (μια η ενσωματωμενη και μια ο usb adapter) μου εγραφε οτι και τα δυο ειναι απενεργοποιημενα απο το hardware!!! Καλα, οτι η ενσωματωμενη καρτα ειναι απενεργοποιημενη, ειναι. Αλλα το usb adapter, δεν ειναι στα αληθεια απενεργοποιημενο. Λειτουργει και πολυ καλα μαλιστα.

Αυτο εγινε και με αλλες διανομες linux οπως το cranchbang, το madbox και το debian. Ομως οταν δοκιμασα puppylinux lucid, το usb adapter δουλεψε μια χαρα χωρις να κανω τιποτα ιδιαιτερο. Ουτε drivers εγκατεστησα.

Το θεμα ειναι γιατι μου βγαζει το Lubuntu και οποιαδηποτε διανομη, οτι το adapter ειναι απενεργοποιημενο ενω με το puppylinux (και τo windows xp) δεν υπαρχει προβλημα?

[modenas88]

Μήπως στο Ubuntu χρειάζεται να πατήσεις κάποιον συνδυασμό πλήκτρων με τα πλήκτρα Fn; πχ Fn+F8

Υπάρχει περίπτωση να είναι κλειδωμένο από κάποιο λογισμικό (όχι κουμπιά κτλ). Αυτό το ελέγχεις με την εντολή:

Κώδικας: Επιλογή όλων

rfkill list

Αν για το ασύρματο αναφέρει:

soft blocked: yes

, τότε αυτό θα διορθώνεται με την εντολή:

Κώδικας: Επιλογή όλων

rfkill unblock wifi

[Learner]

Αν για το ασύρματο αναφέρει:

soft blocked: yes

, τότε αυτό θα διορθώνεται με την εντολή:

Κώδικας: Επιλογή όλων

rfkill unblock wifi

Νομίζω πως θέλει sudo για να τρέξει σωστά η εντολή

Κώδικας: Επιλογή όλων

sudo rfkill unblock wifi

ή

Κώδικας: Επιλογή όλων

sudo rfkill unblock all

για όλα.

[modenas88]

Νομίζω πως θέλει sudo για να τρέξει σωστά η εντολή

Σε μένα για το unblock, λειτουργεί και χωρίς δικαιώματα διαχειριστή.

[Fedil]

Μου λεει soft blocked: no και ειχα δοκιμασει αυτη την συνταγη αλλα τιποτα.

[modenas88]

Οπότε δώσε τα αποτελέσματα των παρακάτω εντολών:

Κώδικας: Επιλογή όλων

rfkill list
iwlist scan
lsusb
lsmod
sudo lshw -class network
dmesg


[Fedil]

Εδω ειναι οι απαντησεις, ολα αυτα με live cd lubuntu

Κώδικας: Επιλογή όλων

rfkill list

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no


Κώδικας: Επιλογή όλων


iwlist scan
lo Interface doesn't support scanning.

eth1 No scan results

wlan0 Failed to read scan data : Network is down

eth0 Interface doesn't support scanning.

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 13b1:0020 Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]
Bus 001 Device 003: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. JM20329 SATA Bridge


Κώδικας: Επιλογή όλων


lsmod
Module Size Used by
nls_iso8859_1 12617 1
nls_cp437 12751 1
vfat 17308 1
fat 55605 1 vfat
usb_storage 39646 1
dm_crypt 22528 0
arc4 12473 2
rt73usb 27029 0
rt2x00usb 20061 1 rt73usb
rt2x00lib 48858 2 rt73usb,rt2x00usb
mac80211 436455 2 rt2x00usb,rt2x00lib
snd_intel8x0 33455 1
snd_ac97_codec 106082 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
snd_pcm 80845 2 snd_intel8x0,snd_ac97_codec
snd_seq_midi 13132 0
snd_rawmidi 25424 1 snd_seq_midi
snd_seq_midi_event 14475 1 snd_seq_midi
ipw2200 146176 0
snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event
snd_timer 28931 2 snd_pcm,snd_seq
libipw 46701 1 ipw2200
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211 178679 4 rt2x00lib,mac80211,ipw2200,libipw
tifm_7xx1 12937 0
joydev 17393 0
snd 62064 9 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
tifm_core 15040 1 tifm_7xx1
pcmcia 39791 0
yenta_socket 27428 0
pcmcia_rsrc 18367 1 yenta_socket
soundcore 14635 1 snd
psmouse 87140 0
pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc
lib80211 14040 2 ipw2200,libipw
snd_page_alloc 14115 2 snd_intel8x0,snd_pcm
serio_raw 13027 0
bnep 17830 2
parport_pc 32114 0
dm_multipath 22710 0
mac_hid 13077 0
bluetooth 158438 7 bnep
ppdev 12849 0
lp 17455 0
parport 40930 3 parport_pc,ppdev,lp
squashfs 36095 1
overlayfs 27511 1
nls_utf8 12493 1
isofs 39553 1
dm_raid45 76451 0
xor 25987 1 dm_raid45
dm_mirror 21822 0
dm_region_hash 16065 1 dm_mirror
dm_log 18193 3 dm_raid45,dm_mirror,dm_region_hash
btrfs 638208 0
zlib_deflate 26622 1 btrfs
libcrc32c 12543 1 btrfs
radeon 729591 2
ttm 65344 1 radeon
drm_kms_helper 45466 1 radeon
drm 197692 4 radeon,ttm,drm_kms_helper
firewire_ohci 40180 0
firewire_core 56906 1 firewire_ohci
crc_itu_t 12627 2 rt73usb,firewire_core
sdhci_pci 18324 0
sdhci 28241 1 sdhci_pci
sky2 49545 0
i2c_algo_bit 13199 1 radeon
video 19068 0
zram 18193 1

Κώδικας: Επιλογή όλων

sudo lshw -class network
*-network
description: Ethernet interface
product: 88E8036 PCI-E Fast Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 10
serial: 00:a0:d1:bd:f8:7a
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 firmware=N/A latency=0 link=no multicast=yes port=twisted pair
resources: irq:11 memory:bc000000-bc003fff ioport:a000(size=256)
*-network DISABLED
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection
vendor: Intel Corporation
physical id: 4
bus info: pci@0000:06:04.0
logical name: eth1
version: 05
serial: 00:16:6f:52:ca:82
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ipw2200 driverversion=1.2.2kmprq firmware=ABG:9.0.5.27 (Dec 12 2007) latency=128 link=no maxlatency=24 mingnt=3 multicast=yes wireless=IEEE 802.11bg
resources: irq:11 memory:b000b000-b000bfff
*-network DISABLED
description: Wireless interface
physical id: 3
bus info: usb@1:3
logical name: wlan0
serial: 00:1d:7e:94:a2:0e
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rt73usb driverversion=3.2.0-23-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg

Κώδικας: Επιλογή όλων


dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:41:14 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffdfffc (usable)
[ 0.000000] BIOS-e820: 000000001ffdfffc - 000000001fffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: TOSHIBA Satellite M40/Portable PC, BIOS Version 1.70 10/14/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1ffdf max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001ffdf000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001ffdf000 page 4k
[ 0.000000] kernel direct mapping tables up to 1ffdf000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 1f1c8000 - 1ffdf000
[ 0.000000] ACPI: RSDP 000e5010 00014 (v00 TOSINV)
[ 0.000000] ACPI: RSDT 1fff89f7 00034 (v01 INSYDE RSDT_000 00000100 ABCD 00010200)
[ 0.000000] ACPI: FACP 1ffffb30 00074 (v01 TOSINV FACP_000 00000100 0000 00010200)
[ 0.000000] ACPI: DSDT 1fff9040 06AE5 (v01 TOSINV SONOMA 00001004 INTL 02002036)
[ 0.000000] ACPI: FACS 1fffffc0 00040
[ 0.000000] ACPI: MCFG 1ffffbc0 0003C (v01 INSYDE MCFG_000 30303030 0000 30303030)
[ 0.000000] ACPI: SSDT 1fff8be5 00237 (v01 PmRef Cpu0Ist 00003000 INTL 20030522)
[ 0.000000] ACPI: SSDT 1fff8a2b 001BA (v01 PmRef Cpu0Cst 00003001 INTL 20030522)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffdf000
[ 0.000000] low ram: 0 - 1ffdf000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ffdf
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001ffdf
[ 0.000000] On node 0 totalpages: 130926
[ 0.000000] free_area_init_node: node 0, pgdat c18258c0, node_mem_map dedc7200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125951 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @de800000 s31616 r0 d21632 u4194304
[ 0.000000] pcpu-alloc: s31616 r0 d21632 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129902
[ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2096368 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 492628k/524156k available (5627k kernel code, 31076k reserved, 2764k data, 712k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07df000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdffdf000 ( 511 MB)
[ 0.000000] .init : 0xc1833000 - 0xc18e5000 ( 712 kB)
[ 0.000000] .data : 0xc157ef84 - 0xc1832080 (2764 kB)
[ 0.000000] .text : 0xc1000000 - 0xc157ef84 (5627 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=de408000 soft=de40a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1729.079 MHz processor.
[ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.15 BogoMIPS (lpj=6916316)
[ 0.008009] pid_max: default: 32768 minimum: 301
[ 0.008037] Security Framework initialized
[ 0.008063] AppArmor: AppArmor initialized
[ 0.008066] Yama: becoming mindful.
[ 0.008139] Mount-cache hash table entries: 512
[ 0.008307] Initializing cgroup subsys cpuacct
[ 0.008315] Initializing cgroup subsys memory
[ 0.008327] Initializing cgroup subsys devices
[ 0.008330] Initializing cgroup subsys freezer
[ 0.008333] Initializing cgroup subsys blkio
[ 0.008343] Initializing cgroup subsys perf_event
[ 0.008371] Disabled fast string operations
[ 0.008380] mce: CPU supports 5 MCE banks
[ 0.008644] SMP alternatives: switching to UP code
[ 0.018113] Freeing SMP alternatives: 24k freed
[ 0.018122] ACPI: Core revision 20110623
[ 0.018126] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.018222] ACPI: Forced DSDT copy: length 0x06AE5 copied locally, original unmapped
[ 0.022611] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.024039] ftrace: allocating 25954 entries in 51 pages
[ 0.028077] weird, boot CPU (#0) not listed by the BIOS.
[ 0.028081] SMP motherboard not detected.
[ 0.028084] Local APIC not detected. Using dummy APIC emulation.
[ 0.028086] SMP disabled
[ 0.028088] Performance Events:
[ 0.028092] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.028094] no hardware sampling interrupt available.
[ 0.028098] p6 PMU driver.
[ 0.028102] ... version: 0
[ 0.028104] ... bit width: 32
[ 0.028106] ... generic registers: 2
[ 0.028109] ... value mask: 00000000ffffffff
[ 0.028111] ... max period: 000000007fffffff
[ 0.028113] ... fixed-purpose events: 0
[ 0.028116] ... event mask: 0000000000000003
[ 0.028300] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[ 0.028321] Brought up 1 CPUs
[ 0.028324] Total of 1 processors activated (3458.15 BogoMIPS).
[ 0.028517] devtmpfs: initialized
[ 0.028682] EVM: security.selinux
[ 0.028684] EVM: security.SMACK64
[ 0.028687] EVM: security.capability
[ 0.028723] PM: Registering ACPI NVS region at 1fffffc0 (64 bytes)
[ 0.030227] print_constraints: dummy:
[ 0.030265] RTC time: 12:20:02, date: 08/08/12
[ 0.030316] NET: Registered protocol family 16
[ 0.030480] EISA bus registered
[ 0.030526] ACPI: bus type pci registered
[ 0.030612] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.030617] PCI: not using MMCONFIG
[ 0.030666] PCI: PCI BIOS revision 2.10 entry at 0xea8f4, last bus=6
[ 0.030669] PCI: Using configuration type 1 for base access
[ 0.033576] bio: create slab <bio-0> at 0
[ 0.033689] ACPI: Added _OSI(Module Device)
[ 0.033693] ACPI: Added _OSI(Processor Device)
[ 0.033695] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.033698] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.035075] ACPI: EC: Look up EC in DSDT
[ 0.044108] ACPI: Interpreter enabled
[ 0.044118] ACPI: (supports S0 S3 S4 S5)
[ 0.044143] ACPI: Using PIC for interrupt routing
[ 0.044163] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.044354] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.044357] PCI: Using MMCONFIG for extended config space
[ 0.062517] ACPI: Power Resource [PFA1] (off)
[ 0.062935] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.068135] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.068138] HEST: Table not found.
[ 0.068144] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.068501] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.069220] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.069224] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.069228] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.069233] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.069236] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.069240] pci_root PNP0A08:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.069255] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[ 0.069306] pci 0000:00:01.0: [8086:2591] type 1 class 0x000604
[ 0.069351] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.069356] pci 0000:00:01.0: PME# disabled
[ 0.069413] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
[ 0.069517] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.069522] pci 0000:00:1c.0: PME# disabled
[ 0.069554] pci 0000:00:1c.1: [8086:2662] type 1 class 0x000604
[ 0.069657] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.069663] pci 0000:00:1c.1: PME# disabled
[ 0.069697] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
[ 0.069752] pci 0000:00:1d.0: reg 20: [io 0x1200-0x121f]
[ 0.069793] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
[ 0.069848] pci 0000:00:1d.1: reg 20: [io 0x1220-0x123f]
[ 0.069890] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
[ 0.069945] pci 0000:00:1d.2: reg 20: [io 0x1240-0x125f]
[ 0.069986] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
[ 0.070040] pci 0000:00:1d.3: reg 20: [io 0x1260-0x127f]
[ 0.070092] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
[ 0.070116] pci 0000:00:1d.7: reg 10: [mem 0xf4000000-0xf40003ff]
[ 0.070218] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.070224] pci 0000:00:1d.7: PME# disabled
[ 0.070247] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.070338] pci 0000:00:1e.2: [8086:266e] type 0 class 0x000401
[ 0.070359] pci 0000:00:1e.2: reg 10: [io 0xe000-0xe0ff]
[ 0.070372] pci 0000:00:1e.2: reg 14: [io 0xe100-0xe13f]
[ 0.070384] pci 0000:00:1e.2: reg 18: [mem 0xd0000000-0xd00001ff]
[ 0.070397] pci 0000:00:1e.2: reg 1c: [mem 0xd0000200-0xd00002ff]
[ 0.070459] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.070464] pci 0000:00:1e.2: PME# disabled
[ 0.070484] pci 0000:00:1e.3: [8086:266d] type 0 class 0x000703
[ 0.070505] pci 0000:00:1e.3: reg 10: [io 0xe200-0xe2ff]
[ 0.070518] pci 0000:00:1e.3: reg 14: [io 0xe300-0xe37f]
[ 0.070598] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.070603] pci 0000:00:1e.3: PME# disabled
[ 0.070627] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[ 0.070733] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.070743] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.070751] pci 0000:00:1f.0: quirk: [io 0x1300-0x133f] claimed by ICH6 GPIO
[ 0.070756] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0300-037f
[ 0.070761] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0110-011f
[ 0.070789] pci 0000:00:1f.2: [8086:2653] type 0 class 0x000101
[ 0.070810] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.070823] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.070835] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.070848] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.070860] pci 0000:00:1f.2: reg 20: [io 0x1100-0x110f]
[ 0.070913] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.070918] pci 0000:00:1f.2: PME# disabled
[ 0.070971] pci 0000:01:00.0: [1002:5460] type 0 class 0x000300
[ 0.070984] pci 0000:01:00.0: reg 10: [mem 0x90000000-0x97ffffff pref]
[ 0.070993] pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
[ 0.071002] pci 0000:01:00.0: reg 18: [mem 0xc0000000-0xc000ffff]
[ 0.071028] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.071060] pci 0000:01:00.0: supports D1 D2
[ 0.071072] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.071083] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.071088] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
[ 0.071092] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff]
[ 0.071097] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref]
[ 0.071184] pci 0000:02:00.0: [11ab:4351] type 0 class 0x000200
[ 0.071216] pci 0000:02:00.0: reg 10: [mem 0xbc000000-0xbc003fff 64bit]
[ 0.071233] pci 0000:02:00.0: reg 18: [io 0xa000-0xa0ff]
[ 0.071382] pci 0000:02:00.0: supports D1 D2
[ 0.071385] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.071392] pci 0000:02:00.0: PME# disabled
[ 0.071410] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.071424] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.071431] pci 0000:00:1c.0: bridge window [io 0xa000-0xbfff]
[ 0.071437] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.071445] pci 0000:00:1c.0: bridge window [mem 0x8c000000-0x8fffffff 64bit pref]
[ 0.071504] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.071510] pci 0000:00:1c.1: bridge window [io 0x8000-0x9fff]
[ 0.071516] pci 0000:00:1c.1: bridge window [mem 0xb8000000-0xbbffffff]
[ 0.071524] pci 0000:00:1c.1: bridge window [mem 0x88000000-0x8bffffff 64bit pref]
[ 0.071577] pci 0000:06:04.0: [8086:4220] type 0 class 0x000280
[ 0.071603] pci 0000:06:04.0: reg 10: [mem 0xb000b000-0xb000bfff]
[ 0.071716] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
[ 0.071723] pci 0000:06:04.0: PME# disabled
[ 0.071749] pci 0000:06:06.0: [104c:8031] type 2 class 0x000607
[ 0.071775] pci 0000:06:06.0: reg 10: [mem 0x13000000-0x13000fff]
[ 0.071817] pci 0000:06:06.0: supports D1 D2
[ 0.071820] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.071826] pci 0000:06:06.0: PME# disabled
[ 0.071852] pci 0000:06:06.2: [104c:8032] type 0 class 0x000c00
[ 0.071878] pci 0000:06:06.2: reg 10: [mem 0xb0000000-0xb00007ff]
[ 0.071894] pci 0000:06:06.2: reg 14: [mem 0xb0004000-0xb0007fff]
[ 0.072011] pci 0000:06:06.2: supports D1 D2
[ 0.072014] pci 0000:06:06.2: PME# supported from D0 D1 D2 D3hot
[ 0.072020] pci 0000:06:06.2: PME# disabled
[ 0.072045] pci 0000:06:06.3: [104c:8033] type 0 class 0x000180
[ 0.072071] pci 0000:06:06.3: reg 10: [mem 0xb0008000-0xb0009fff]
[ 0.072183] pci 0000:06:06.3: supports D1 D2
[ 0.072185] pci 0000:06:06.3: PME# supported from D0 D1 D2 D3hot
[ 0.072192] pci 0000:06:06.3: PME# disabled
[ 0.072216] pci 0000:06:06.4: [104c:8034] type 0 class 0x000805
[ 0.072241] pci 0000:06:06.4: reg 10: [mem 0xb000a000-0xb000a0ff]
[ 0.072256] pci 0000:06:06.4: reg 14: [mem 0xb000a100-0xb000a1ff]
[ 0.072272] pci 0000:06:06.4: reg 18: [mem 0xb000a200-0xb000a2ff]
[ 0.072359] pci 0000:06:06.4: supports D1 D2
[ 0.072362] pci 0000:06:06.4: PME# supported from D0 D1 D2 D3hot
[ 0.072368] pci 0000:06:06.4: PME# disabled
[ 0.072427] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.072434] pci 0000:00:1e.0: bridge window [io 0x6000-0x7fff]
[ 0.072439] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xb7ffffff]
[ 0.072448] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x87ffffff 64bit pref]
[ 0.072452] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.072456] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.072511] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-06]
[ 0.072537] pci_bus 0000:00: on NUMA node 0
[ 0.072541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.072751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.072832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.072910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.073010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.073141] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.073145] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.073148] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.096253] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11)
[ 0.096314] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.096372] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11)
[ 0.096430] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.096488] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11)
[ 0.096545] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled.
[ 0.096617] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11
[ 0.096675] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11
[ 0.096806] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.096813] vgaarb: loaded
[ 0.096814] vgaarb: bridge control possible 0000:01:00.0
[ 0.096982] i2c-core: driver [aat2870] using legacy suspend method
[ 0.096984] i2c-core: driver [aat2870] using legacy resume method
[ 0.097106] SCSI subsystem initialized
[ 0.097167] libata version 3.00 loaded.
[ 0.097228] usbcore: registered new interface driver usbfs
[ 0.097244] usbcore: registered new interface driver hub
[ 0.097276] usbcore: registered new device driver usb
[ 0.097403] PCI: Using ACPI for IRQ routing
[ 0.097486] PCI: pci_cache_line_size set to 64 bytes
[ 0.097533] pci 0000:06:06.0: address space collision: [mem 0x13000000-0x13000fff] conflicts with System RAM [mem 0x00100000-0x1ffdfffb]
[ 0.097588] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.097591] reserve RAM buffer: 000000001ffdfffc - 000000001fffffff
[ 0.097729] NetLabel: Initializing
[ 0.097732] NetLabel: domain hash size = 128
[ 0.097734] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.097749] NetLabel: unlabeled traffic allowed by default
[ 0.097956] hpet clockevent registered
[ 0.097962] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.097969] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.097975] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.100052] Switching to clocksource hpet
[ 0.110539] AppArmor: AppArmor Filesystem Enabled
[ 0.110601] pnp: PnP ACPI init
[ 0.110631] ACPI: bus type pnp registered
[ 0.112510] pnp 00:00: [bus 00-ff]
[ 0.112515] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.112519] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.112522] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.112526] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.112529] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.112532] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.112536] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.112539] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.112542] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.112545] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.112549] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.112552] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.112555] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.112558] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.112562] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.112565] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.112568] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.112572] pnp 00:00: [mem 0x20000000-0xfebfffff window]
[ 0.112660] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.112676] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.112679] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.112682] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.112685] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.112689] pnp 00:01: [mem 0xf0008000-0xf000bfff]
[ 0.112692] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.112695] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.112698] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[ 0.112780] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.112785] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.112789] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.112792] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.112796] system 00:01: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.112800] system 00:01: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.112804] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.112808] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.112812] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.116252] pnp 00:02: [io 0x0000-0x001f]
[ 0.116256] pnp 00:02: [io 0x0081-0x0091]
[ 0.116259] pnp 00:02: [io 0x0093-0x009f]
[ 0.116261] pnp 00:02: [io 0x00c0-0x00df]
[ 0.116265] pnp 00:02: [dma 4]
[ 0.116314] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.116326] pnp 00:03: [mem 0xff800000-0xffffffff]
[ 0.116371] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.116412] pnp 00:04: [io 0x00f0]
[ 0.116418] pnp 00:04: [irq 13]
[ 0.116471] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.116488] pnp 00:05: [io 0x002e-0x002f]
[ 0.116491] pnp 00:05: [io 0x004e-0x004f]
[ 0.116494] pnp 00:05: [io 0x0061]
[ 0.116497] pnp 00:05: [io 0x0063]
[ 0.116499] pnp 00:05: [io 0x0065]
[ 0.116502] pnp 00:05: [io 0x0067]
[ 0.116505] pnp 00:05: [io 0x0070]
[ 0.116507] pnp 00:05: [io 0x0080]
[ 0.116510] pnp 00:05: [io 0x0092]
[ 0.116513] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.116516] pnp 00:05: [io 0x0300-0x036f]
[ 0.116519] pnp 00:05: [io 0x0800-0x080f]
[ 0.116521] pnp 00:05: [io 0x1000-0x107f]
[ 0.116524] pnp 00:05: [io 0x1300-0x133f]
[ 0.116527] pnp 00:05: [mem 0xe0000000-0xefffffff]
[ 0.116535] pnp 00:05: [mem 0xf0008000-0xf000bfff]
[ 0.116538] pnp 00:05: [mem 0xfed14000-0xfed17fff]
[ 0.116542] pnp 00:05: [mem 0xfed18000-0xfed18fff]
[ 0.116545] pnp 00:05: [mem 0xfed19000-0xfed19fff]
[ 0.116636] system 00:05: [io 0x0300-0x036f] has been reserved
[ 0.116640] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.116644] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.116648] system 00:05: [io 0x1300-0x133f] has been reserved
[ 0.116652] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.116656] system 00:05: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.116660] system 00:05: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.116664] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.116667] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.116672] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.116700] pnp 00:06: [io 0x0070-0x0077]
[ 0.116752] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.116772] pnp 00:07: [io 0x0060]
[ 0.116775] pnp 00:07: [io 0x0064]
[ 0.116778] pnp 00:07: [irq 1]
[ 0.116835] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.116854] pnp 00:08: [irq 12]
[ 0.116904] pnp 00:08: Plug and Play ACPI device, IDs SYN1101 SYN1100 SYN0002 PNP0f13 (active)
[ 0.117183] pnp: PnP ACPI: found 9 devices
[ 0.117186] ACPI: ACPI bus type pnp unregistered
[ 0.117191] PnPBIOS: Disabled by ACPI PNP
[ 0.154316] PCI: max bus depth: 2 pci_try_num: 3
[ 0.154365] pci 0000:01:00.0: BAR 6: assigned [mem 0x98000000-0x9801ffff pref]
[ 0.154371] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.154375] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
[ 0.154380] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff]
[ 0.154384] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref]
[ 0.154390] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.154395] pci 0000:00:1c.0: bridge window [io 0xa000-0xbfff]
[ 0.154402] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.154408] pci 0000:00:1c.0: bridge window [mem 0x8c000000-0x8fffffff 64bit pref]
[ 0.154417] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.154421] pci 0000:00:1c.1: bridge window [io 0x8000-0x9fff]
[ 0.154428] pci 0000:00:1c.1: bridge window [mem 0xb8000000-0xbbffffff]
[ 0.154435] pci 0000:00:1c.1: bridge window [mem 0x88000000-0x8bffffff 64bit pref]
[ 0.154447] pci 0000:06:06.0: BAR 0: assigned [mem 0xb4000000-0xb4000fff]
[ 0.154454] pci 0000:06:06.0: BAR 0: set to [mem 0xb4000000-0xb4000fff] (PCI address [0xb4000000-0xb4000fff])
[ 0.154460] pci 0000:06:06.0: BAR 16: assigned [mem 0x20000000-0x23ffffff]
[ 0.154464] pci 0000:06:06.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.154468] pci 0000:06:06.0: BAR 14: assigned [io 0x6000-0x60ff]
[ 0.154471] pci 0000:06:06.0: BAR 13: assigned [io 0x6400-0x64ff]
[ 0.154475] pci 0000:06:06.0: CardBus bridge to [bus 07-0a]
[ 0.154478] pci 0000:06:06.0: bridge window [io 0x6400-0x64ff]
[ 0.154485] pci 0000:06:06.0: bridge window [io 0x6000-0x60ff]
[ 0.154492] pci 0000:06:06.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.154498] pci 0000:06:06.0: bridge window [mem 0x20000000-0x23ffffff]
[ 0.154505] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.154509] pci 0000:00:1e.0: bridge window [io 0x6000-0x7fff]
[ 0.154516] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xb7ffffff]
[ 0.154523] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x87ffffff 64bit pref]
[ 0.154648] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.154652] PCI: setting IRQ 11 as level-triggered
[ 0.154660] pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.154666] pci 0000:00:01.0: setting latency timer to 64
[ 0.154755] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.154757] PCI: setting IRQ 10 as level-triggered
[ 0.154764] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 0.154770] pci 0000:00:1c.0: setting latency timer to 64
[ 0.154780] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.154786] pci 0000:00:1c.1: setting latency timer to 64
[ 0.154795] pci 0000:00:1e.0: setting latency timer to 64
[ 0.154884] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.154889] pci 0000:06:06.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.154897] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.154900] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.154904] pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
[ 0.154907] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xcfffffff]
[ 0.154911] pci_bus 0000:01: resource 2 [mem 0x90000000-0x9fffffff pref]
[ 0.154915] pci_bus 0000:02: resource 0 [io 0xa000-0xbfff]
[ 0.154918] pci_bus 0000:02: resource 1 [mem 0xbc000000-0xbfffffff]
[ 0.154921] pci_bus 0000:02: resource 2 [mem 0x8c000000-0x8fffffff 64bit pref]
[ 0.154925] pci_bus 0000:03: resource 0 [io 0x8000-0x9fff]
[ 0.154928] pci_bus 0000:03: resource 1 [mem 0xb8000000-0xbbffffff]
[ 0.154932] pci_bus 0000:03: resource 2 [mem 0x88000000-0x8bffffff 64bit pref]
[ 0.154936] pci_bus 0000:06: resource 0 [io 0x6000-0x7fff]
[ 0.154939] pci_bus 0000:06: resource 1 [mem 0xb0000000-0xb7ffffff]
[ 0.154943] pci_bus 0000:06: resource 2 [mem 0x80000000-0x87ffffff 64bit pref]
[ 0.154946] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.154950] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.154953] pci_bus 0000:07: resource 0 [io 0x6400-0x64ff]
[ 0.154956] pci_bus 0000:07: resource 1 [io 0x6000-0x60ff]
[ 0.154960] pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.154963] pci_bus 0000:07: resource 3 [mem 0x20000000-0x23ffffff]
[ 0.155025] NET: Registered protocol family 2
[ 0.155114] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.155360] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.155488] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.155609] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.155612] TCP reno registered
[ 0.155616] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.155628] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.155711] NET: Registered protocol family 1
[ 0.155848] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[ 0.155855] pci 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
[ 0.155876] pci 0000:00:1d.0: PCI INT A disabled
[ 0.155967] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.155971] pci 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.155991] pci 0000:00:1d.1: PCI INT B disabled
[ 0.156032] pci 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.156051] pci 0000:00:1d.2: PCI INT C disabled
[ 0.156061] pci 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.156081] pci 0000:00:1d.3: PCI INT D disabled
[ 0.156091] pci 0000:00:1d.7: enabling device (0000 -> 0002)
[ 0.156097] pci 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
[ 0.156124] pci 0000:00:1d.7: PCI INT A disabled
[ 0.156145] pci 0000:01:00.0: Boot video device
[ 0.156168] PCI: CLS 16 bytes, default 64
[ 0.156592] audit: initializing netlink socket (disabled)
[ 0.156607] type=2000 audit(1344428402.156:1): initialized
[ 0.185145] Trying to unpack rootfs image as initramfs...
[ 3.466717] Refined TSC clocksource calibration: 1728.999 MHz.
[ 3.466728] Switching to clocksource tsc
[ 3.469379] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.472024] VFS: Disk quotas dquot_6.5.2
[ 3.472108] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.472892] fuse init (API version 7.17)
[ 3.473020] msgmni has been set to 962
[ 3.473408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.473440] io scheduler noop registered
[ 3.473443] io scheduler deadline registered
[ 3.473452] io scheduler cfq registered (default)
[ 3.473617] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.473656] pcieport 0000:00:01.0: irq 16 for MSI/MSI-X
[ 3.473716] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.473769] pcieport 0000:00:1c.0: irq 17 for MSI/MSI-X
[ 3.473852] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.473904] pcieport 0000:00:1c.1: irq 18 for MSI/MSI-X
[ 3.474019] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.474054] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.476193] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.480275] ACPI: AC Adapter [AC] (on-line)
[ 3.480438] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 3.484213] ACPI: Lid Switch [LID0]
[ 3.484326] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.484335] ACPI: Power Button [PWRB]
[ 3.484426] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.484431] ACPI: Power Button [PWRF]
[ 3.484540] ACPI: Fan [FAN1] (off)
[ 3.484667] Marking TSC unstable due to TSC halts in idle
[ 3.484684] ACPI: acpi_idle registered with cpuidle
[ 3.556257] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.556263] ACPI: Thermal Zone [TZCR] (63 C)
[ 4.787690] sched: RT throttling activated
[ 4.787834] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.787837] ACPI: Thermal Zone [TZVR] (37 C)
[ 4.796246] thermal LNXTHERM:02: registered as thermal_zone2
[ 4.796252] ACPI: Thermal Zone [TZVL] (35 C)
[ 4.804244] thermal LNXTHERM:03: registered as thermal_zone3
[ 4.804249] ACPI: Thermal Zone [TZCL] (37 C)
[ 4.804311] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.804329] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.804387] ERST: Table is not found!
[ 4.804390] GHES: HEST is not enabled!
[ 4.804610] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.806470] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
[ 4.806475] PCI: setting IRQ 5 as level-triggered
[ 4.806483] serial 0000:00:1e.3: PCI INT B -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5
[ 4.806520] serial 0000:00:1e.3: PCI INT B disabled
[ 4.806697] Linux agpgart interface v0.103
[ 4.813925] brd: module loaded
[ 4.814733] isapnp: Scanning for PnP cards...
[ 4.820382] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.864330] loop: module loaded
[ 4.864536] ahci 0000:00:1f.2: version 3.0
[ 4.864558] ahci 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.864576] ahci 0000:00:1f.2: PCI INT B disabled
[ 4.864580] ahci: probe of 0000:00:1f.2 failed with error -22
[ 4.864633] ata_piix 0000:00:1f.2: version 2.13
[ 4.864643] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 4.864651] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.881549] Freeing initrd memory: 14428k freed
[ 5.025571] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 5.069686] scsi0 : ata_piix
[ 5.069837] scsi1 : ata_piix
[ 5.070704] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[ 5.070708] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[ 5.071401] Fixed MDIO Bus: probed
[ 5.071431] tun: Universal TUN/TAP device driver, 1.6
[ 5.071433] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 5.071657] PPP generic driver version 2.4.2
[ 5.071800] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.071833] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
[ 5.071859] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.071864] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.071921] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 5.071960] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.075863] ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
[ 5.075877] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000
[ 5.123206] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.166862] hub 1-0:1.0: USB hub found
[ 5.166869] hub 1-0:1.0: 8 ports detected
[ 5.166987] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.167006] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.167036] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
[ 5.167049] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.167053] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.167119] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.167153] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
[ 5.167323] hub 2-0:1.0: USB hub found
[ 5.167329] hub 2-0:1.0: 2 ports detected
[ 5.167414] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 5.167424] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.167428] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.167489] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.167520] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
[ 5.167684] hub 3-0:1.0: USB hub found
[ 5.167689] hub 3-0:1.0: 2 ports detected
[ 5.167772] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 5.167782] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.167786] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.167833] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.167861] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240
[ 5.168054] hub 4-0:1.0: USB hub found
[ 5.168060] hub 4-0:1.0: 2 ports detected
[ 5.168145] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 5.168155] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.168159] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.168212] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.168241] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260
[ 5.168408] hub 5-0:1.0: USB hub found
[ 5.168413] hub 5-0:1.0: 2 ports detected
[ 5.168569] usbcore: registered new interface driver libusual
[ 5.168635] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.173690] i8042: Detected active multiplexing controller, rev 1.1
[ 5.175723] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.175729] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 5.175733] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 5.175737] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 5.175741] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 5.175838] mousedev: PS/2 mouse device common for all mice
[ 5.176057] rtc_cmos 00:06: RTC can wake from S4
[ 5.176192] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 5.176220] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 5.176325] device-mapper: uevent: version 1.0.3
[ 5.176427] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.176476] EISA: Probing bus 0 at eisa.0
[ 5.176484] Cannot allocate resource for EISA slot 1
[ 5.176504] Cannot allocate resource for EISA slot 6
[ 5.176507] Cannot allocate resource for EISA slot 7
[ 5.176509] Cannot allocate resource for EISA slot 8
[ 5.176512] EISA: Detected 0 cards.
[ 5.176525] cpufreq-nforce2: No nForce2 chipset.
[ 5.176575] cpuidle: using governor ladder
[ 5.176648] cpuidle: using governor menu
[ 5.176651] EFI Variables Facility v0.08 2004-May-17
[ 5.176956] TCP cubic registered
[ 5.177146] NET: Registered protocol family 10
[ 5.177846] NET: Registered protocol family 17
[ 5.177868] Registering the dns_resolver key type
[ 5.177893] Using IPI No-Shortcut mode
[ 5.178013] PM: Hibernation image not present or could not be loaded.
[ 5.178030] registered taskstats version 1
[ 5.221677] isapnp: No Plug & Play device found
[ 5.228766] Magic number: 8:156:329
[ 5.228821] tty tty50: hash matches
[ 5.228917] rtc_cmos 00:06: setting system clock to 2012-08-08 12:20:07 UTC (1344428407)
[ 5.229288] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.229290] EDD information not available.
[ 5.230300] ata2.00: ATAPI: MATSHITADVD-RAM UJ-830S, 1.00, max UDMA/33
[ 5.230458] Switching to clocksource hpet
[ 5.230897] ata1.00: ATA-6: FUJITSU MHT2080AT, 0022, max UDMA/100
[ 5.230901] ata1.00: 156301488 sectors, multi 16: LBA
[ 5.230905] ata1.00: applying bridge limits
[ 5.237998] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 5.244926] ata1.00: configured for UDMA/100
[ 5.244949] ata2.00: configured for UDMA/33
[ 5.245162] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5
[ 5.245391] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 5.245457] sd 0:0:0:0: [sda] Write Protect is off
[ 5.245461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.245490] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.245883] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.248924] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-830S 1.00 PQ: 0 ANSI: 5
[ 5.250595] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.250599] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.250732] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.250814] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.476041] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 5.609999] sda: sda1
[ 5.610250] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.610272] Freeing unused kernel memory: 712k freed
[ 5.610639] Write protecting the kernel text: 5628k
[ 5.610690] Write protecting the kernel read-only data: 2324k
[ 5.628540] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.628877] zram: num_devices not specified. Using default: 1
[ 5.628880] zram: Creating 1 devices ...
[ 5.633607] udevd[94]: starting version 175
[ 5.803189] Adding 253892k swap on /dev/zram0. Priority:100 extents:1 across:253892k SS
[ 5.814622] sky2: driver version 1.30
[ 5.814679] sky2 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 5.814698] sky2 0000:02:00.0: setting latency timer to 64
[ 5.814730] sky2 0000:02:00.0: Yukon-2 FE chip revision 1
[ 5.814850] sky2 0000:02:00.0: irq 19 for MSI/MSI-X
[ 5.814965] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 5.815196] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 5.816734] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.845755] sdhci: Secure Digital Host Controller Interface driver
[ 5.845759] sdhci: Copyright(c) Pierre Ossman
[ 5.846109] sdhci-pci 0000:06:06.4: SDHCI controller found [104c:8034] (rev 0)
[ 5.846135] sdhci-pci 0000:06:06.4: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 5.846177] mmc0: no vmmc regulator found
[ 5.846218] Registered led device: mmc0::
[ 5.873718] mmc0: SDHCI controller on PCI [0000:06:06.4] using PIO
[ 5.873762] mmc1: no vmmc regulator found
[ 5.873803] Registered led device: mmc1::
[ 5.889288] mmc1: SDHCI controller on PCI [0000:06:06.4] using PIO
[ 5.889320] mmc2: no vmmc regulator found
[ 5.889360] Registered led device: mmc2::
[ 5.893739] [drm] Initialized drm 1.1.0 20060810
[ 5.907092] mmc2: SDHCI controller on PCI [0000:06:06.4] using PIO
[ 5.907277] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
[ 5.907282] PCI: setting IRQ 6 as level-triggered
[ 5.907291] firewire_ohci 0000:06:06.2: PCI INT C -> Link[LNKG] -> GSI 6 (level, low) -> IRQ 6
[ 5.912076] sky2 0000:02:00.0: No interrupt generated using MSI, switching to INTx mode.
[ 5.912765] sky2 0000:02:00.0: eth0: addr 00:a0:d1:bd:f8:7a
[ 5.960099] firewire_ohci: Added fw-ohci device 0000:06:06.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 5.996529] [drm] radeon defaulting to kernel modesetting.
[ 5.996533] [drm] radeon kernel modesetting enabled.
[ 5.996625] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 5.996632] radeon 0000:01:00.0: setting latency timer to 64
[ 5.999095] [drm] initializing kernel modesetting (RV380 0x1002:0x5460 0x1179:0xFF10).
[ 5.999119] [drm] register mmio base: 0xC0000000
[ 5.999121] [drm] register mmio size: 65536
[ 5.999328] [drm] Generation 2 PCI interface, using max accessible memory
[ 5.999335] radeon 0000:01:00.0: VRAM: 128M 0x0000000090000000 - 0x0000000097FFFFFF (64M used)
[ 5.999339] radeon 0000:01:00.0: GTT: 512M 0x0000000070000000 - 0x000000008FFFFFFF
[ 6.000429] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.000432] [drm] Driver supports precise vblank timestamp query.
[ 6.000479] radeon 0000:01:00.0: irq 19 for MSI/MSI-X
[ 6.000486] radeon 0000:01:00.0: radeon: using MSI.
[ 6.001473] [drm] radeon: irq initialized.
[ 6.002501] [drm] Detected VRAM RAM=128M, BAR=128M
[ 6.002506] [drm] RAM width 128bits DDR
[ 6.004949] [TTM] Zone kernel: Available graphics memory: 253896 kiB.
[ 6.004953] [TTM] Initializing pool allocator.
[ 6.004983] [drm] radeon: 64M of VRAM memory ready
[ 6.004986] [drm] radeon: 512M of GTT memory ready.
[ 6.005006] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.005878] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 6.007533] [drm] PCIE GART of 512M enabled (table at 0x0000000090040000).
[ 6.007557] radeon 0000:01:00.0: WB enabled
[ 6.007633] [drm] Loading R300 Microcode
[ 6.012987] [drm] radeon: ring at 0x0000000070001000
[ 6.013010] [drm] ring test succeeded in 1 usecs
[ 6.013188] [drm] radeon: ib pool ready.
[ 6.013267] [drm] ib test succeeded in 0 usecs
[ 6.014439] [drm] Panel ID String: AUO
[ 6.014442] [drm] Panel Size 1280x800
[ 6.033481] [drm] radeon legacy LVDS backlight initialized
[ 6.035716] [drm] Radeon Display Connectors
[ 6.035719] [drm] Connector 0:
[ 6.035721] [drm] VGA
[ 6.035724] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 6.035726] [drm] Encoders:
[ 6.035728] [drm] CRT1: INTERNAL_DAC1
[ 6.035730] [drm] Connector 1:
[ 6.035732] [drm] DVI-I
[ 6.035734] [drm] HPD1
[ 6.035737] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 6.035739] [drm] Encoders:
[ 6.035741] [drm] CRT1: INTERNAL_DAC1
[ 6.035743] [drm] DFP1: INTERNAL_TMDS1
[ 6.035745] [drm] Connector 2:
[ 6.035747] [drm] LVDS
[ 6.035748] [drm] Encoders:
[ 6.035750] [drm] LCD1: INTERNAL_LVDS
[ 6.035752] [drm] Connector 3:
[ 6.035754] [drm] S-video
[ 6.035756] [drm] Encoders:
[ 6.035757] [drm] TV1: INTERNAL_DAC2
[ 6.035814] [drm] radeon: power management initialized
[ 6.116044] [drm] fb mappable at 0x900C0000
[ 6.116047] [drm] vram apper at 0x90000000
[ 6.116049] [drm] size 4096000
[ 6.116051] [drm] fb depth is 24
[ 6.116053] [drm] pitch is 5120
[ 6.116185] fbcon: radeondrmfb (fb0) is primary device
[ 6.179135] Console: switching to colour frame buffer device 160x50
[ 6.184508] fb0: radeondrmfb frame buffer device
[ 6.184511] drm: registered panic notifier
[ 6.198550] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 6.460170] firewire_core: created device fw0: GUID 00080da0d1bdf87a, S400
[ 9.126363] Btrfs loaded
[ 9.133447] xor: automatically using best checksumming function: pIII_sse
[ 9.152018] pIII_sse : 4492.000 MB/sec
[ 9.152022] xor: using function: pIII_sse (4492.000 MB/sec)
[ 9.153115] device-mapper: dm-raid45: initialized v0.2594b
[ 10.221594] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 10.246250] ISO 9660 Extensions: RRIP_1991A
[ 11.037348] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 89.317456] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 89.792180] udevd[1161]: starting version 175
[ 98.700985] lp: driver loaded but no devices found
[ 99.253203] Bluetooth: Core ver 2.16
[ 99.253278] NET: Registered protocol family 31
[ 99.253281] Bluetooth: HCI device and connection manager initialized
[ 99.253285] Bluetooth: HCI socket layer initialized
[ 99.253288] Bluetooth: L2CAP socket layer initialized
[ 99.253924] Bluetooth: SCO socket layer initialized
[ 99.927334] device-mapper: multipath: version 1.3.0 loaded
[ 100.457274] ppdev: user-space parallel port driver
[ 100.645130] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 100.645134] Bluetooth: BNEP filters: protocol multicast
[ 102.480325] intel_rng: FWH not detected
[ 103.348583] lib80211: common routines for IEEE802.11 drivers
[ 103.348589] lib80211_crypt: registered algorithm 'NULL'
[ 104.005062] init: failsafe main process (1398) killed by TERM signal
[ 104.327790] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0/0x0
[ 104.327799] psmouse serio1: synaptics: Toshiba Satellite M40 detected, limiting rate to 40pps.
[ 104.391223] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 104.440553] yenta_cardbus 0000:06:06.0: CardBus bridge found [1179:ff10]
[ 104.440576] yenta_cardbus 0000:06:06.0: Enabling burst memory read transactions
[ 104.440583] yenta_cardbus 0000:06:06.0: Using CSCINT to route CSC interrupts to PCI
[ 104.440587] yenta_cardbus 0000:06:06.0: Routing CardBus interrupts to PCI
[ 104.440594] yenta_cardbus 0000:06:06.0: TI: mfunc 0x01aa1b22, devctl 0x66
[ 104.672574] yenta_cardbus 0000:06:06.0: ISA IRQ mask 0x0098, PCI irq 11
[ 104.672579] yenta_cardbus 0000:06:06.0: Socket status: 30000006
[ 104.672584] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 104.672595] yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge window: [io 0x6000-0x7fff]
[ 104.672600] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x7fff: excluding 0x6000-0x60ff 0x6400-0x64ff
[ 104.683508] yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge window: [mem 0xb0000000-0xb7ffffff]
[ 104.683513] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0000000-0xb7ffffff: excluding 0xb0000000-0xb07fffff 0xb4000000-0xb47fffff
[ 104.683531] yenta_cardbus 0000:06:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x87ffffff 64bit pref]
[ 104.683535] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x87ffffff: excluding 0x80000000-0x87ffffff
[ 106.126402] tifm_7xx1 0000:06:06.3: PCI INT D -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5
[ 106.148140] cfg80211: Calling CRDA to update world regulatory domain
[ 107.549019] libipw: 802.11 data/management/control stack, git-1.1.13
[ 107.549025] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 108.535410] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 108.535416] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 108.535557] ipw2200 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 108.535589] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 110.290270] cfg80211: World regulatory domain updated:
[ 110.290276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 110.290280] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 110.290284] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 110.290287] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 110.290291] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 110.290295] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.175959] ipw2200: Radio Frequency Kill Switch is On:
[ 112.175962] Kill switch must be turned off for wireless networking to work.
[ 112.184886] cfg80211: failed to add phy80211 symlink to netdev!
[ 112.185015] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185020] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185024] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185028] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185031] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185035] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185038] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185042] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185046] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185050] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185053] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185057] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185060] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185064] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185067] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185071] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185075] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185079] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185082] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185086] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185089] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 112.185093] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 112.185403] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 116.768555] sky2 0000:02:00.0: eth0: enabling interface
[ 116.787237] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 116.789085] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 116.793117] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 118.283823] snd_intel8x0 0000:00:1e.2: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 118.283858] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[ 119.208047] intel8x0_measure_ac97_clock: measured 55456 usecs (2672 samples)
[ 119.208052] intel8x0: clocking to 48000
[ 123.532051] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
[ 123.994278] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994285] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994289] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994293] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994296] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994300] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994303] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994307] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994310] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994314] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994318] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994321] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994325] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994329] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994332] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994336] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994339] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994343] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994346] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994350] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994353] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994357] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 123.994361] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994365] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 123.994368] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994372] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 123.994375] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 123.994379] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 124.514205] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 124.518769] Registered led device: rt73usb-phy1::radio
[ 124.518869] Registered led device: rt73usb-phy1::assoc
[ 124.518962] Registered led device: rt73usb-phy1::quality
[ 124.519984] usbcore: registered new interface driver rt73usb
[ 125.933692] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 167.088048] ipw2200: Failed to send POWER_MODE: Command timed out.
[ 315.508096] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 322.237992] Initializing USB Mass Storage driver...
[ 322.238247] scsi2 : usb-storage 1-2:1.0
[ 322.238449] usbcore: registered new interface driver usb-storage
[ 322.238455] USB Mass Storage support registered.
[ 323.236844] scsi 2:0:0:0: Direct-Access StoreJet Transcend PQ: 0 ANSI: 2 CCS
[ 323.242875] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 323.243175] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 323.243916] sd 2:0:0:0: [sdb] Write Protect is off
[ 323.243926] sd 2:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 323.244801] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 323.273133] sdb: sdb1
[ 323.275923] sd 2:0:0:0: [sdb] Attached SCSI disk

[madvinegar]

Hard blocked: yes

Επισης λεει για network disabled και στο USB και στην καρτα.

Φοβαμαι οτι λογω του οτι ειναι η καρτα hard blocked, επηρεάζει τον network manager ο οποίος κατα συνεπεια εχει κλειδωσει και αυτος και δεν επιτρεπει καμια συνδεση, ουτε μεσω USB adapter.
Τουλαχιστον ετσι νομιζω εγω...

Αν πατησεις αριστερο κλικ στον network manager, το enable networking και τo enable wireless ειναι τικαρισμενα?

[Fedil]

Δεν μπορεις να τα τικαρεις. Ολo αυτο ομως γιατι δεν συμβαινει και στο puppy linux που εκει μου λειτουργει κομπλε το usb adapter?

[madvinegar]

Μηπως το puppy linux χρησιμοποιει αλλο wireless manager? πχ τον wicd?