προβλημα με internet connection στην 14.04

[arma1]

οτι λεει ο τιτλος παιδια, εχω προβλημα με την συνδεση internet ,εκει που ανοιγω κανονικα σελιδες χανετε η συνδεση, οπως επισης πατω να κανω αναβαθμιση και εκει που ξεκινα να κανει σταματα και βγαζει σφαλμα δικτυου, τι πρεπει να κανω? εχω κανει καθαρη εγκατασταση.

[arma1]

τελικα τις αναβαθμισεις τις εκανα αλλαζοντας server (απο Ελλαδα στο κυριο ) απο το application software-update , ναι ομως ετσι δε φορτωνουν οι σελιδες, το βαζω Ελλαδα και εκει πολλες φορες με πετα εξω, υπαρχει λυση?

[arma1]

επισης οταν παω να κανω εγκατασταση ενα προγραμμα μου βγαζει τις περισσοτερες φορες σφαλμα, οτι πρεπει να εγκαταστησω καποια πακετα, ποια ειναι αυτα? ( This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time.)

[the_eye]

Μην κανεις συνεχως νεα θέματα, επεξεργάσου το τελευταίο.
Για τις ενημερώσεις βάλε τον κύριο server. Αυτή η ρύθμιση δεν έχει καμία σχεση με το internet.

H συνδεσή σου είναι με καλώδιο ;

[arma1]

επιτελους καταφερα να μπω στο site, επι του θεματος με καλωδιο συνδεομαι και ο παροχος ειναι η hol αν αυτο παιζει ρολο, τι ελεγχο μπορω να κανω για να μη με πετα εκτος δικτυου? στα win 7 οταν μπαινω δεν εχω θεμα

[the_eye]

Για δώσε το αποτέλεσμα των παρακάτω εντολών στο τερματικό.

Κώδικας: Επιλογή όλων

ifconfig
dmesg

[arma1]

αν πρεπει να σβησω κατι απο την ip για να μη φαινετε εδω στο φορουμ πες μου, ευχαριστω!!

Κώδικας: Επιλογή όλων

Link encap:Ethernet HWaddr 00:24:1d:d9:4b:ca
inet addr:192.168.2.4 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::224:1dff:fed9:4bca/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:64212 errors:0 dropped:0 overruns:0 frame:0
TX packets:38713 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:88765540 (88.7 MB) TX bytes:3258597 (3.2 MB)

lo Link encap:Local Loopback
inet addr:χ.χ.χ.χ Mask:χχχ.χ.χ.χ
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:2045 errors:0 dropped:0 overruns:0 frame:0
TX packets:2045 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:195496 (195.4 KB) TX bytes:195496 (195.4 KB)

Κώδικας: Επιλογή όλων

1.323354] rtc_cmos 00:03: RTC can wake from S4
[ 1.323677] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.323712] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.323809] device-mapper: uevent: version 1.0.3
[ 1.324016] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.324028] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.324184] TCP: cubic registered
[ 1.324244] NET: Registered protocol family 10
[ 1.324366] NET: Registered protocol family 17
[ 1.324372] Key type dns_resolver registered
[ 1.325093] Loading compiled-in X.509 certificates
[ 1.325948] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[ 1.325955] registered taskstats version 1
[ 1.329275] Key type trusted registered
[ 1.332333] Key type encrypted registered
[ 1.335215] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.335221] IMA: No TPM chip found, activating TPM-bypass!
[ 1.335583] regulator-dummy: disabling
[ 1.335894] Magic number: 10:757:96
[ 1.336089] rtc_cmos 00:03: setting system clock to 2014-04-27 21:04:13 UTC (1398632653)
[ 1.336847] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.336849] EDD information not available.
[ 1.336870] PM: Hibernation image not present or could not be loaded.
[ 1.338207] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[ 1.338208] Write protecting the kernel read-only data: 12288k
[ 1.340260] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[ 1.341854] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[ 1.357678] systemd-udevd[123]: starting version 204
[ 1.374242] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.374798] scsi0 : pata_jmicron
[ 1.374873] scsi1 : pata_jmicron
[ 1.374905] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 17
[ 1.374907] ata2: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 17
[ 1.376028] ahci 0000:00:1f.2: version 3.0
[ 1.376146] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.376177] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.380573] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.380581] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.380756] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
[ 1.380881] r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xffffc90000c6c000, 00:24:1d:d9:4b:ca, XID 083000c0 IRQ 46
[ 1.380883] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.390111] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.390115] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
[ 1.430657] scsi2 : ahci
[ 1.430812] scsi3 : ahci
[ 1.430957] scsi4 : ahci
[ 1.431074] scsi5 : ahci
[ 1.431186] scsi6 : ahci
[ 1.431307] scsi7 : ahci
[ 1.431349] ata3: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd100 irq 45
[ 1.431351] ata4: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd180 irq 45
[ 1.431353] ata5: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd200 irq 45
[ 1.431355] ata6: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd280 irq 45
[ 1.431357] ata7: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd300 irq 45
[ 1.431359] ata8: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd380 irq 45
[ 1.442158] firewire_ohci 0000:05:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.446157] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.446165] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.446541] scsi8 : ahci
[ 1.446851] scsi9 : ahci
[ 1.446937] ata9: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe100 irq 16
[ 1.446946] ata10: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe180 irq 16
[ 1.514148] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.566038] tsc: Refined TSC clocksource calibration: 2664.772 MHz
[ 1.648605] usb 2-1: New USB device found, idVendor=058f, idProduct=6364
[ 1.648612] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.648616] usb 2-1: Product: Mass Storage Device
[ 1.648620] usb 2-1: Manufacturer: Generic
[ 1.648623] usb 2-1: SerialNumber: 058F63646476
[ 1.651828] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 1.651920] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.652010] scsi10 : usb-storage 2-1:1.0
[ 1.652059] usbcore: registered new interface driver usb-storage
[ 1.654752] usbcore: registered new interface driver usbhid
[ 1.654754] usbhid: USB HID core driver
[ 1.656434] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-1/input1
[ 1.765972] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.769904] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.921849] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.923861] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.923867] ata3.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0AB0Q, max UDMA/133
[ 1.923871] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.924170] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.924178] ata3.00: configured for UDMA/133
[ 1.924535] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
[ 1.924814] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.924824] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.925403] sd 2:0:0:0: [sda] Write Protect is off
[ 1.925407] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.925430] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.926065] sda: sda1
[ 1.927018] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.942023] firewire_core 0000:05:07.0: created device fw0: GUID 00e1221e0000241d, S400
[ 2.073689] usb 2-8: new high-speed USB device number 5 using ehci-pci
[ 2.222075] usb 2-8: New USB device found, idVendor=045e, idProduct=0779
[ 2.222081] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.222085] usb 2-8: Product: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-3000
[ 2.222089] usb 2-8: Manufacturer: Microsoft
[ 2.241569] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.461416] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 2.565708] Switched to clocksource tsc
[ 2.638835] usb 3-1: New USB device found, idVendor=045e, idProduct=0782
[ 2.638841] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.638846] usb 3-1: Product: Microsoft USB Optical Mouse
[ 2.638849] usb 3-1: Manufacturer: PixArt
[ 2.650394] scsi 10:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 2.651020] scsi 10:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 2.651701] scsi 10:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 2.652545] scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 2.652959] sd 10:0:0:0: Attached scsi generic sg1 type 0
[ 2.653110] sd 10:0:0:1: Attached scsi generic sg2 type 0
[ 2.653411] sd 10:0:0:2: Attached scsi generic sg3 type 0
[ 2.653721] sd 10:0:0:3: Attached scsi generic sg4 type 0
[ 2.654949] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 2.655062] hid-generic 0003:045E:0782.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 2.674754] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 2.675507] sd 10:0:0:1: [sdc] Attached SCSI removable disk
[ 2.676220] sd 10:0:0:2: [sdd] Attached SCSI removable disk
[ 2.677066] sd 10:0:0:3: [sde] Attached SCSI removable disk
[ 2.733258] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.734947] ata5.00: ATAPI: Optiarc DVD RW AD-7240S, 1.03, max UDMA/100
[ 2.736990] ata5.00: configured for UDMA/100
[ 2.738944] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.03 PQ: 0 ANSI: 5
[ 2.741203] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.741207] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.741554] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.741609] sr 4:0:0:0: Attached scsi generic sg5 type 5
[ 2.893173] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 3.044647] usb 7-2: New USB device found, idVendor=0e8f, idProduct=0003
[ 3.044653] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.044657] usb 7-2: Product: 2In1 USB Joystick
[ 3.044661] usb 7-2: Manufacturer: MY-POWER CO.,LTD.
[ 3.053639] input: MY-POWER CO.,LTD. 2In1 USB Joystick as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4
[ 3.053828] pantherlord 0003:0E8F:0003.0003: input,hidraw2: USB HID v1.10 Joystick [MY-POWER CO.,LTD. 2In1 USB Joystick] on usb-0000:00:1d.1-2/input0
[ 3.053836] pantherlord 0003:0E8F:0003.0003: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula <anssi.hannula@gmail.com>
[ 3.240849] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.242088] ata6.00: HPA detected: current 1953523055, native 1953525168
[ 3.242097] ata6.00: ATA-8: ST31000520AS, CC32, max UDMA/133
[ 3.242101] ata6.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.243516] ata6.00: configured for UDMA/133
[ 3.243922] scsi 5:0:0:0: Direct-Access ATA ST31000520AS CC32 PQ: 0 ANSI: 5
[ 3.244199] sd 5:0:0:0: [sdf] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.244205] sd 5:0:0:0: Attached scsi generic sg6 type 0
[ 3.244599] sd 5:0:0:0: [sdf] Write Protect is off
[ 3.244602] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 3.244696] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.282211] sdf: sdf1 sdf2 sdf3 < sdf5 sdf6 >
[ 3.283787] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 3.284978] usb 9-1: new low-speed USB device number 2 using uhci_hcd
[ 3.463262] usb 9-1: New USB device found, idVendor=045e, idProduct=0750
[ 3.463265] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.463266] usb 9-1: Product: Wired Keyboard 600
[ 3.463268] usb 9-1: Manufacturer: Microsoft
[ 3.481532] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.0/input/input5
[ 3.481802] hid-generic 0003:045E:0750.0004: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.3-1/input0
[ 3.512409] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.1/input/input6
[ 3.512824] hid-generic 0003:045E:0750.0005: input,hidraw4: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.3-1/input1
[ 3.560623] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.880414] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.207044] random: nonblocking pool is initialized
[ 4.294077] EXT4-fs (sdf6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.196531] init: plymouth-upstart-bridge main process (208) terminated with status 1
[ 5.196542] init: plymouth-upstart-bridge main process ended, respawning
[ 5.199174] init: plymouth-upstart-bridge main process (217) terminated with status 1
[ 5.199183] init: plymouth-upstart-bridge main process ended, respawning
[ 5.201189] init: plymouth-upstart-bridge main process (219) terminated with status 1
[ 5.201198] init: plymouth-upstart-bridge main process ended, respawning
[ 5.204131] init: plymouth-upstart-bridge main process (221) terminated with status 1
[ 5.204141] init: plymouth-upstart-bridge main process ended, respawning
[ 5.206044] init: plymouth-upstart-bridge main process (223) terminated with status 1
[ 5.206059] init: plymouth-upstart-bridge main process ended, respawning
[ 5.208612] init: plymouth-upstart-bridge main process (224) terminated with status 1
[ 5.208625] init: plymouth-upstart-bridge main process ended, respawning
[ 5.211135] init: plymouth-upstart-bridge main process (226) terminated with status 1
[ 5.211145] init: plymouth-upstart-bridge main process ended, respawning
[ 5.212665] init: plymouth-upstart-bridge main process (228) terminated with status 1
[ 5.212676] init: plymouth-upstart-bridge main process ended, respawning
[ 5.214653] init: plymouth-upstart-bridge main process (229) terminated with status 1
[ 5.214663] init: plymouth-upstart-bridge main process ended, respawning
[ 5.216223] init: plymouth-upstart-bridge main process (231) terminated with status 1
[ 5.216247] init: plymouth-upstart-bridge main process ended, respawning
[ 5.218229] init: plymouth-upstart-bridge main process (232) terminated with status 1
[ 5.218239] init: plymouth-upstart-bridge respawning too fast, stopped
[ 7.911517] Adding 7811068k swap on /dev/sdf5. Priority:-1 extents:1 across:7811068k FS
[ 7.928855] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.952124] systemd-udevd[340]: starting version 204
[ 8.472547] lp: driver loaded but no devices found
[ 8.477506] ppdev: user-space parallel port driver
[ 8.490895] [drm] Initialized drm 1.1.0 20060810
[ 8.513822] [drm] radeon kernel modesetting enabled.
[ 8.513873] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 8.513874] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 8.513890] Console: switching to colour dummy device 80x25
[ 8.515944] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BE 0x174B:0xE138).
[ 8.515959] [drm] register mmio base: 0xFBDC0000
[ 8.515961] [drm] register mmio size: 131072
[ 8.516017] ATOM BIOS: JUNIPER
[ 8.516081] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 8.516083] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 8.516084] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 8.516085] [drm] RAM width 128bits DDR
[ 8.516126] [TTM] Zone kernel: Available graphics memory: 4084054 kiB
[ 8.516128] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 8.516129] [TTM] Initializing pool allocator
[ 8.516132] [TTM] Initializing DMA pool allocator
[ 8.516145] [drm] radeon: 1024M of VRAM memory ready
[ 8.516146] [drm] radeon: 1024M of GTT memory ready.
[ 8.516158] [drm] Loading JUNIPER Microcode
[ 8.522000] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[ 8.522005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.522024] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.532574] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 8.539096] EDAC MC: Ver: 3.0.0
[ 8.540834] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 8.540865] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 8.540869] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 8.551338] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 8.551340] SKU: port_connectivity=0x1
[ 8.551341] SKU: enable_pcbeep=0x0
[ 8.551342] SKU: check_sum=0x00000005
[ 8.551343] SKU: customization=0x000000e6
[ 8.551344] SKU: external_amp=0x0
[ 8.551344] SKU: platform_type=0x0
[ 8.551345] SKU: swap=0x0
[ 8.551346] SKU: override=0x1
[ 8.551921] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.551923] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.551924] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.551925] mono: mono_out=0x0
[ 8.551926] dig-out=0x1e/0x0
[ 8.551927] inputs:
[ 8.551928] Rear Mic=0x18
[ 8.551929] Front Mic=0x19
[ 8.551930] Line=0x1a
[ 8.551931] CD=0x1c
[ 8.551932] dig-in=0x1f
[ 8.551933] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 8.551934] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0887
[ 8.572976] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 8.574852] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.574913] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.574958] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.574998] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.575036] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.575075] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.575114] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.575154] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.622279] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 8.773306] type=1400 audit(1398621860.938:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=452 comm="apparmor_parser"
[ 8.773312] type=1400 audit(1398621860.938:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"
[ 8.773315] type=1400 audit(1398621860.938:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
[ 8.773322] type=1400 audit(1398621860.938:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=451 comm="apparmor_parser"
[ 8.773327] type=1400 audit(1398621860.938:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=451 comm="apparmor_parser"
[ 8.773331] type=1400 audit(1398621860.938:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=451 comm="apparmor_parser"
[ 8.773656] type=1400 audit(1398621860.938:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"
[ 8.773660] type=1400 audit(1398621860.938:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
[ 8.773670] type=1400 audit(1398621860.938:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=451 comm="apparmor_parser"
[ 8.773673] type=1400 audit(1398621860.938:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=451 comm="apparmor_parser"
[ 8.855395] Linux video capture interface: v2.00
[ 8.909882] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 8.911071] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 8.926766] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 8.926892] radeon 0000:01:00.0: WB enabled
[ 8.926895] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88021211fc00
[ 8.926896] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88021211fc0c
[ 8.927490] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000509c418
[ 8.927491] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.927492] [drm] Driver supports precise vblank timestamp query.
[ 8.927508] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[ 8.927518] radeon 0000:01:00.0: radeon: using MSI.
[ 8.927540] [drm] radeon: irq initialized.
[ 8.944201] [drm] ring test on 0 succeeded in 1 usecs
[ 8.944258] [drm] ring test on 3 succeeded in 1 usecs
[ 9.130285] [drm] ring test on 5 succeeded in 1 usecs
[ 9.130293] [drm] UVD initialized successfully.
[ 9.130569] [drm] Enabling audio 0 support
[ 9.130598] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.130625] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.280861] [drm] ib test on ring 5 succeeded
[ 9.281404] [drm] Radeon Display Connectors
[ 9.281406] [drm] Connector 0:
[ 9.281407] [drm] DP-1
[ 9.281408] [drm] HPD4
[ 9.281409] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 9.281410] [drm] Encoders:
[ 9.281411] [drm] DFP1: INTERNAL_UNIPHY2
[ 9.281412] [drm] Connector 1:
[ 9.281413] [drm] HDMI-A-1
[ 9.281414] [drm] HPD5
[ 9.281415] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 9.281416] [drm] Encoders:
[ 9.281417] [drm] DFP2: INTERNAL_UNIPHY2
[ 9.281418] [drm] Connector 2:
[ 9.281418] [drm] DVI-I-1
[ 9.281419] [drm] HPD1
[ 9.281420] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 9.281421] [drm] Encoders:
[ 9.281422] [drm] DFP3: INTERNAL_UNIPHY1
[ 9.281423] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 9.281424] [drm] Connector 3:
[ 9.281425] [drm] DVI-I-2
[ 9.281426] [drm] HPD6
[ 9.281427] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 9.281428] [drm] Encoders:
[ 9.281429] [drm] DFP4: INTERNAL_UNIPHY
[ 9.281429] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 9.281470] [drm] Internal thermal controller with fan control
[ 9.295028] [drm] radeon: dpm initialized
[ 9.413551] [drm] fb mappable at 0xE045E000
[ 9.413553] [drm] vram apper at 0xE0000000
[ 9.413554] [drm] size 8294400
[ 9.413554] [drm] fb depth is 24
[ 9.413555] [drm] pitch is 7680
[ 9.413736] fbcon: radeondrmfb (fb0) is primary device
[ 9.477501] Console: switching to colour frame buffer device 200x56
[ 9.480243] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 9.480244] radeon 0000:01:00.0: registered panic notifier
[ 9.480251] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[ 9.480485] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 9.480487] hda-intel 0000:01:00.1: Using LPIB position fix
[ 9.480518] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 9.483906] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[ 9.490290] HDMI ATI/AMD: no speaker allocation for ELD
[ 9.490341] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input15
[ 13.977593] 5:3:1: cannot get freq at ep 0x82
[ 13.984822] uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-3000 (045e:0779)
[ 13.984823] usbcore: registered new interface driver snd-usb-audio
[ 13.987913] input: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-3000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8:1.0/input/input16
[ 13.987981] usbcore: registered new interface driver uvcvideo
[ 13.987983] USB Video Class driver (1.1.1)
[ 17.044856] EXT4-fs (sdf6): re-mounted. Opts: errors=remount-ro
[ 17.291322] init: failsafe main process (662) killed by TERM signal
[ 17.431685] Bluetooth: Core ver 2.17
[ 17.431700] NET: Registered protocol family 31
[ 17.431702] Bluetooth: HCI device and connection manager initialized
[ 17.431709] Bluetooth: HCI socket layer initialized
[ 17.431711] Bluetooth: L2CAP socket layer initialized
[ 17.431714] Bluetooth: SCO socket layer initialized
[ 17.436234] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.436238] Bluetooth: BNEP filters: protocol multicast
[ 17.436244] Bluetooth: BNEP socket layer initialized
[ 17.436440] Bluetooth: RFCOMM TTY layer initialized
[ 17.436445] Bluetooth: RFCOMM socket layer initialized
[ 17.436449] Bluetooth: RFCOMM ver 1.11
[ 17.439957] audit_printk_skb: 6 callbacks suppressed
[ 17.439959] type=1400 audit(1398621869.610:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=727 comm="apparmor_parser"
[ 17.439965] type=1400 audit(1398621869.610:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=727 comm="apparmor_parser"
[ 17.440361] type=1400 audit(1398621869.610:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=727 comm="apparmor_parser"
[ 17.519937] init: cups main process (730) killed by HUP signal
[ 17.519948] init: cups main process ended, respawning
[ 17.569702] type=1400 audit(1398621869.738:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=793 comm="apparmor_parser"
[ 17.569709] type=1400 audit(1398621869.738:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=793 comm="apparmor_parser"
[ 17.569714] type=1400 audit(1398621869.738:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=793 comm="apparmor_parser"
[ 17.570101] type=1400 audit(1398621869.738:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=793 comm="apparmor_parser"
[ 17.570105] type=1400 audit(1398621869.738:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=793 comm="apparmor_parser"
[ 17.570308] type=1400 audit(1398621869.738:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=793 comm="apparmor_parser"
[ 17.570351] type=1400 audit(1398621869.738:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=792 comm="apparmor_parser"
[ 18.811010] r8169 0000:04:00.0 eth0: link down
[ 18.811030] r8169 0000:04:00.0 eth0: link down
[ 18.811043] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.811259] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.653786] Calculated ACR N value is too large. You may experience audio problems.
[ 20.911882] r8169 0000:04:00.0 eth0: link up
[ 20.911890] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.083443] 5:3:1: cannot get freq at ep 0x82
[ 33.079894] 5:3:1: cannot get freq at ep 0x82
[ 38.204247] 5:3:1: cannot get freq at ep 0x82
[ 43.200699] 5:3:1: cannot get freq at ep 0x82
[ 47.628392] audit_printk_skb: 132 callbacks suppressed
[ 47.628395] type=1400 audit(1398621899.289:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2007 comm="apparmor_parser"
[ 47.628400] type=1400 audit(1398621899.289:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2007 comm="apparmor_parser"
[ 47.628758] type=1400 audit(1398621899.289:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2007 comm="apparmor_parser"
[ 701.466941] systemd-hostnamed[9215]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
dimitris@dimitris-P55M-UD2:~$

[the_eye]

Όχι δεν υπάρχει κάποιο πρόβλημα, για να σβήσεις κάτι.

Δώσε πάλι τις εντολές αφού σου γίνει κάποια διακοπή στο δίκτυο.

[arma1]

ok φιλε, μολις το κανει θα σου πω, αρκει να προλαβω να το κανω, σ ευχαριστω
edit μολις το εκανε, για δες τι παιζει?

Κώδικας: Επιλογή όλων

Link encap:Ethernet HWaddr 00:24:1d:d9:4b:ca
inet addr:192.168.2.4 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::224:1dff:fed9:4bca/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:131004 errors:0 dropped:0 overruns:0 frame:0
TX packets:92934 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:162953733 (162.9 MB) TX bytes:9808010 (9.8 MB)

lo Link encap:Local Loopback
inet addr:xxx.x.x.x Mask:xxx.x.x.x
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:6923 errors:0 dropped:0 overruns:0 frame:0
TX packets:6923 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:749516 (749.5 KB) TX bytes:749516 (749.5 KB)

Κώδικας: Επιλογή όλων

1.324372] Key type dns_resolver registered
[ 1.325093] Loading compiled-in X.509 certificates
[ 1.325948] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[ 1.325955] registered taskstats version 1
[ 1.329275] Key type trusted registered
[ 1.332333] Key type encrypted registered
[ 1.335215] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.335221] IMA: No TPM chip found, activating TPM-bypass!
[ 1.335583] regulator-dummy: disabling
[ 1.335894] Magic number: 10:757:96
[ 1.336089] rtc_cmos 00:03: setting system clock to 2014-04-27 21:04:13 UTC (1398632653)
[ 1.336847] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.336849] EDD information not available.
[ 1.336870] PM: Hibernation image not present or could not be loaded.
[ 1.338207] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[ 1.338208] Write protecting the kernel read-only data: 12288k
[ 1.340260] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[ 1.341854] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[ 1.357678] systemd-udevd[123]: starting version 204
[ 1.374242] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.374798] scsi0 : pata_jmicron
[ 1.374873] scsi1 : pata_jmicron
[ 1.374905] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 17
[ 1.374907] ata2: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 17
[ 1.376028] ahci 0000:00:1f.2: version 3.0
[ 1.376146] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.376177] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.380573] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.380581] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.380756] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
[ 1.380881] r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xffffc90000c6c000, 00:24:1d:d9:4b:ca, XID 083000c0 IRQ 46
[ 1.380883] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.390111] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.390115] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
[ 1.430657] scsi2 : ahci
[ 1.430812] scsi3 : ahci
[ 1.430957] scsi4 : ahci
[ 1.431074] scsi5 : ahci
[ 1.431186] scsi6 : ahci
[ 1.431307] scsi7 : ahci
[ 1.431349] ata3: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd100 irq 45
[ 1.431351] ata4: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd180 irq 45
[ 1.431353] ata5: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd200 irq 45
[ 1.431355] ata6: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd280 irq 45
[ 1.431357] ata7: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd300 irq 45
[ 1.431359] ata8: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd380 irq 45
[ 1.442158] firewire_ohci 0000:05:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.446157] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.446165] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.446541] scsi8 : ahci
[ 1.446851] scsi9 : ahci
[ 1.446937] ata9: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe100 irq 16
[ 1.446946] ata10: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe180 irq 16
[ 1.514148] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.566038] tsc: Refined TSC clocksource calibration: 2664.772 MHz
[ 1.648605] usb 2-1: New USB device found, idVendor=058f, idProduct=6364
[ 1.648612] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.648616] usb 2-1: Product: Mass Storage Device
[ 1.648620] usb 2-1: Manufacturer: Generic
[ 1.648623] usb 2-1: SerialNumber: 058F63646476
[ 1.651828] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 1.651920] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.652010] scsi10 : usb-storage 2-1:1.0
[ 1.652059] usbcore: registered new interface driver usb-storage
[ 1.654752] usbcore: registered new interface driver usbhid
[ 1.654754] usbhid: USB HID core driver
[ 1.656434] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-1/input1
[ 1.765972] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.769904] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.921849] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.923861] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.923867] ata3.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0AB0Q, max UDMA/133
[ 1.923871] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.924170] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.924178] ata3.00: configured for UDMA/133
[ 1.924535] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
[ 1.924814] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.924824] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.925403] sd 2:0:0:0: [sda] Write Protect is off
[ 1.925407] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.925430] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.926065] sda: sda1
[ 1.927018] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.942023] firewire_core 0000:05:07.0: created device fw0: GUID 00e1221e0000241d, S400
[ 2.073689] usb 2-8: new high-speed USB device number 5 using ehci-pci
[ 2.222075] usb 2-8: New USB device found, idVendor=045e, idProduct=0779
[ 2.222081] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.222085] usb 2-8: Product: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-3000
[ 2.222089] usb 2-8: Manufacturer: Microsoft
[ 2.241569] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.461416] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 2.565708] Switched to clocksource tsc
[ 2.638835] usb 3-1: New USB device found, idVendor=045e, idProduct=0782
[ 2.638841] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.638846] usb 3-1: Product: Microsoft USB Optical Mouse
[ 2.638849] usb 3-1: Manufacturer: PixArt
[ 2.650394] scsi 10:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 2.651020] scsi 10:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 2.651701] scsi 10:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 2.652545] scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 2.652959] sd 10:0:0:0: Attached scsi generic sg1 type 0
[ 2.653110] sd 10:0:0:1: Attached scsi generic sg2 type 0
[ 2.653411] sd 10:0:0:2: Attached scsi generic sg3 type 0
[ 2.653721] sd 10:0:0:3: Attached scsi generic sg4 type 0
[ 2.654949] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 2.655062] hid-generic 0003:045E:0782.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 2.674754] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 2.675507] sd 10:0:0:1: [sdc] Attached SCSI removable disk
[ 2.676220] sd 10:0:0:2: [sdd] Attached SCSI removable disk
[ 2.677066] sd 10:0:0:3: [sde] Attached SCSI removable disk
[ 2.733258] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.734947] ata5.00: ATAPI: Optiarc DVD RW AD-7240S, 1.03, max UDMA/100
[ 2.736990] ata5.00: configured for UDMA/100
[ 2.738944] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.03 PQ: 0 ANSI: 5
[ 2.741203] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.741207] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.741554] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.741609] sr 4:0:0:0: Attached scsi generic sg5 type 5
[ 2.893173] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 3.044647] usb 7-2: New USB device found, idVendor=0e8f, idProduct=0003
[ 3.044653] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.044657] usb 7-2: Product: 2In1 USB Joystick
[ 3.044661] usb 7-2: Manufacturer: MY-POWER CO.,LTD.
[ 3.053639] input: MY-POWER CO.,LTD. 2In1 USB Joystick as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4
[ 3.053828] pantherlord 0003:0E8F:0003.0003: input,hidraw2: USB HID v1.10 Joystick [MY-POWER CO.,LTD. 2In1 USB Joystick] on usb-0000:00:1d.1-2/input0
[ 3.053836] pantherlord 0003:0E8F:0003.0003: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula <anssi.hannula@gmail.com>
[ 3.240849] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.242088] ata6.00: HPA detected: current 1953523055, native 1953525168
[ 3.242097] ata6.00: ATA-8: ST31000520AS, CC32, max UDMA/133
[ 3.242101] ata6.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.243516] ata6.00: configured for UDMA/133
[ 3.243922] scsi 5:0:0:0: Direct-Access ATA ST31000520AS CC32 PQ: 0 ANSI: 5
[ 3.244199] sd 5:0:0:0: [sdf] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.244205] sd 5:0:0:0: Attached scsi generic sg6 type 0
[ 3.244599] sd 5:0:0:0: [sdf] Write Protect is off
[ 3.244602] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 3.244696] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.282211] sdf: sdf1 sdf2 sdf3 < sdf5 sdf6 >
[ 3.283787] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 3.284978] usb 9-1: new low-speed USB device number 2 using uhci_hcd
[ 3.463262] usb 9-1: New USB device found, idVendor=045e, idProduct=0750
[ 3.463265] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.463266] usb 9-1: Product: Wired Keyboard 600
[ 3.463268] usb 9-1: Manufacturer: Microsoft
[ 3.481532] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.0/input/input5
[ 3.481802] hid-generic 0003:045E:0750.0004: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.3-1/input0
[ 3.512409] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.3/usb9/9-1/9-1:1.1/input/input6
[ 3.512824] hid-generic 0003:045E:0750.0005: input,hidraw4: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.3-1/input1
[ 3.560623] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.880414] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.207044] random: nonblocking pool is initialized
[ 4.294077] EXT4-fs (sdf6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.196531] init: plymouth-upstart-bridge main process (208) terminated with status 1
[ 5.196542] init: plymouth-upstart-bridge main process ended, respawning
[ 5.199174] init: plymouth-upstart-bridge main process (217) terminated with status 1
[ 5.199183] init: plymouth-upstart-bridge main process ended, respawning
[ 5.201189] init: plymouth-upstart-bridge main process (219) terminated with status 1
[ 5.201198] init: plymouth-upstart-bridge main process ended, respawning
[ 5.204131] init: plymouth-upstart-bridge main process (221) terminated with status 1
[ 5.204141] init: plymouth-upstart-bridge main process ended, respawning
[ 5.206044] init: plymouth-upstart-bridge main process (223) terminated with status 1
[ 5.206059] init: plymouth-upstart-bridge main process ended, respawning
[ 5.208612] init: plymouth-upstart-bridge main process (224) terminated with status 1
[ 5.208625] init: plymouth-upstart-bridge main process ended, respawning
[ 5.211135] init: plymouth-upstart-bridge main process (226) terminated with status 1
[ 5.211145] init: plymouth-upstart-bridge main process ended, respawning
[ 5.212665] init: plymouth-upstart-bridge main process (228) terminated with status 1
[ 5.212676] init: plymouth-upstart-bridge main process ended, respawning
[ 5.214653] init: plymouth-upstart-bridge main process (229) terminated with status 1
[ 5.214663] init: plymouth-upstart-bridge main process ended, respawning
[ 5.216223] init: plymouth-upstart-bridge main process (231) terminated with status 1
[ 5.216247] init: plymouth-upstart-bridge main process ended, respawning
[ 5.218229] init: plymouth-upstart-bridge main process (232) terminated with status 1
[ 5.218239] init: plymouth-upstart-bridge respawning too fast, stopped
[ 7.911517] Adding 7811068k swap on /dev/sdf5. Priority:-1 extents:1 across:7811068k FS
[ 7.928855] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.952124] systemd-udevd[340]: starting version 204
[ 8.472547] lp: driver loaded but no devices found
[ 8.477506] ppdev: user-space parallel port driver
[ 8.490895] [drm] Initialized drm 1.1.0 20060810
[ 8.513822] [drm] radeon kernel modesetting enabled.
[ 8.513873] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 8.513874] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 8.513890] Console: switching to colour dummy device 80x25
[ 8.515944] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BE 0x174B:0xE138).
[ 8.515959] [drm] register mmio base: 0xFBDC0000
[ 8.515961] [drm] register mmio size: 131072
[ 8.516017] ATOM BIOS: JUNIPER
[ 8.516081] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 8.516083] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 8.516084] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 8.516085] [drm] RAM width 128bits DDR
[ 8.516126] [TTM] Zone kernel: Available graphics memory: 4084054 kiB
[ 8.516128] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 8.516129] [TTM] Initializing pool allocator
[ 8.516132] [TTM] Initializing DMA pool allocator
[ 8.516145] [drm] radeon: 1024M of VRAM memory ready
[ 8.516146] [drm] radeon: 1024M of GTT memory ready.
[ 8.516158] [drm] Loading JUNIPER Microcode
[ 8.522000] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[ 8.522005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.522024] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.532574] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 8.539096] EDAC MC: Ver: 3.0.0
[ 8.540834] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 8.540865] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 8.540869] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 8.551338] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 8.551340] SKU: port_connectivity=0x1
[ 8.551341] SKU: enable_pcbeep=0x0
[ 8.551342] SKU: check_sum=0x00000005
[ 8.551343] SKU: customization=0x000000e6
[ 8.551344] SKU: external_amp=0x0
[ 8.551344] SKU: platform_type=0x0
[ 8.551345] SKU: swap=0x0
[ 8.551346] SKU: override=0x1
[ 8.551921] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.551923] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.551924] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.551925] mono: mono_out=0x0
[ 8.551926] dig-out=0x1e/0x0
[ 8.551927] inputs:
[ 8.551928] Rear Mic=0x18
[ 8.551929] Front Mic=0x19
[ 8.551930] Line=0x1a
[ 8.551931] CD=0x1c
[ 8.551932] dig-in=0x1f
[ 8.551933] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 8.551934] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0887
[ 8.572976] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 8.574852] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.574913] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.574958] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.574998] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.575036] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.575075] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.575114] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.575154] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.622279] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 8.773306] type=1400 audit(1398621860.938:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=452 comm="apparmor_parser"
[ 8.773312] type=1400 audit(1398621860.938:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"
[ 8.773315] type=1400 audit(1398621860.938:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
[ 8.773322] type=1400 audit(1398621860.938:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=451 comm="apparmor_parser"
[ 8.773327] type=1400 audit(1398621860.938:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=451 comm="apparmor_parser"
[ 8.773331] type=1400 audit(1398621860.938:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=451 comm="apparmor_parser"
[ 8.773656] type=1400 audit(1398621860.938:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"
[ 8.773660] type=1400 audit(1398621860.938:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
[ 8.773670] type=1400 audit(1398621860.938:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=451 comm="apparmor_parser"
[ 8.773673] type=1400 audit(1398621860.938:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=451 comm="apparmor_parser"
[ 8.855395] Linux video capture interface: v2.00
[ 8.909882] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 8.911071] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 8.926766] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 8.926892] radeon 0000:01:00.0: WB enabled
[ 8.926895] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88021211fc00
[ 8.926896] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88021211fc0c
[ 8.927490] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000509c418
[ 8.927491] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.927492] [drm] Driver supports precise vblank timestamp query.
[ 8.927508] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[ 8.927518] radeon 0000:01:00.0: radeon: using MSI.
[ 8.927540] [drm] radeon: irq initialized.
[ 8.944201] [drm] ring test on 0 succeeded in 1 usecs
[ 8.944258] [drm] ring test on 3 succeeded in 1 usecs
[ 9.130285] [drm] ring test on 5 succeeded in 1 usecs
[ 9.130293] [drm] UVD initialized successfully.
[ 9.130569] [drm] Enabling audio 0 support
[ 9.130598] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.130625] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.280861] [drm] ib test on ring 5 succeeded
[ 9.281404] [drm] Radeon Display Connectors
[ 9.281406] [drm] Connector 0:
[ 9.281407] [drm] DP-1
[ 9.281408] [drm] HPD4
[ 9.281409] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 9.281410] [drm] Encoders:
[ 9.281411] [drm] DFP1: INTERNAL_UNIPHY2
[ 9.281412] [drm] Connector 1:
[ 9.281413] [drm] HDMI-A-1
[ 9.281414] [drm] HPD5
[ 9.281415] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 9.281416] [drm] Encoders:
[ 9.281417] [drm] DFP2: INTERNAL_UNIPHY2
[ 9.281418] [drm] Connector 2:
[ 9.281418] [drm] DVI-I-1
[ 9.281419] [drm] HPD1
[ 9.281420] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 9.281421] [drm] Encoders:
[ 9.281422] [drm] DFP3: INTERNAL_UNIPHY1
[ 9.281423] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 9.281424] [drm] Connector 3:
[ 9.281425] [drm] DVI-I-2
[ 9.281426] [drm] HPD6
[ 9.281427] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 9.281428] [drm] Encoders:
[ 9.281429] [drm] DFP4: INTERNAL_UNIPHY
[ 9.281429] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 9.281470] [drm] Internal thermal controller with fan control
[ 9.295028] [drm] radeon: dpm initialized
[ 9.413551] [drm] fb mappable at 0xE045E000
[ 9.413553] [drm] vram apper at 0xE0000000
[ 9.413554] [drm] size 8294400
[ 9.413554] [drm] fb depth is 24
[ 9.413555] [drm] pitch is 7680
[ 9.413736] fbcon: radeondrmfb (fb0) is primary device
[ 9.477501] Console: switching to colour frame buffer device 200x56
[ 9.480243] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 9.480244] radeon 0000:01:00.0: registered panic notifier
[ 9.480251] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[ 9.480485] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 9.480487] hda-intel 0000:01:00.1: Using LPIB position fix
[ 9.480518] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 9.483906] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[ 9.490290] HDMI ATI/AMD: no speaker allocation for ELD
[ 9.490341] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input15
[ 13.977593] 5:3:1: cannot get freq at ep 0x82
[ 13.984822] uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-3000 (045e:0779)
[ 13.984823] usbcore: registered new interface driver snd-usb-audio
[ 13.987913] input: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-3000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8:1.0/input/input16
[ 13.987981] usbcore: registered new interface driver uvcvideo
[ 13.987983] USB Video Class driver (1.1.1)
[ 17.044856] EXT4-fs (sdf6): re-mounted. Opts: errors=remount-ro
[ 17.291322] init: failsafe main process (662) killed by TERM signal
[ 17.431685] Bluetooth: Core ver 2.17
[ 17.431700] NET: Registered protocol family 31
[ 17.431702] Bluetooth: HCI device and connection manager initialized
[ 17.431709] Bluetooth: HCI socket layer initialized
[ 17.431711] Bluetooth: L2CAP socket layer initialized
[ 17.431714] Bluetooth: SCO socket layer initialized
[ 17.436234] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.436238] Bluetooth: BNEP filters: protocol multicast
[ 17.436244] Bluetooth: BNEP socket layer initialized
[ 17.436440] Bluetooth: RFCOMM TTY layer initialized
[ 17.436445] Bluetooth: RFCOMM socket layer initialized
[ 17.436449] Bluetooth: RFCOMM ver 1.11
[ 17.439957] audit_printk_skb: 6 callbacks suppressed
[ 17.439959] type=1400 audit(1398621869.610:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=727 comm="apparmor_parser"
[ 17.439965] type=1400 audit(1398621869.610:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=727 comm="apparmor_parser"
[ 17.440361] type=1400 audit(1398621869.610:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=727 comm="apparmor_parser"
[ 17.519937] init: cups main process (730) killed by HUP signal
[ 17.519948] init: cups main process ended, respawning
[ 17.569702] type=1400 audit(1398621869.738:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=793 comm="apparmor_parser"
[ 17.569709] type=1400 audit(1398621869.738:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=793 comm="apparmor_parser"
[ 17.569714] type=1400 audit(1398621869.738:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=793 comm="apparmor_parser"
[ 17.570101] type=1400 audit(1398621869.738:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=793 comm="apparmor_parser"
[ 17.570105] type=1400 audit(1398621869.738:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=793 comm="apparmor_parser"
[ 17.570308] type=1400 audit(1398621869.738:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=793 comm="apparmor_parser"
[ 17.570351] type=1400 audit(1398621869.738:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=792 comm="apparmor_parser"
[ 18.811010] r8169 0000:04:00.0 eth0: link down
[ 18.811030] r8169 0000:04:00.0 eth0: link down
[ 18.811043] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.811259] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.653786] Calculated ACR N value is too large. You may experience audio problems.
[ 20.911882] r8169 0000:04:00.0 eth0: link up
[ 20.911890] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.083443] 5:3:1: cannot get freq at ep 0x82
[ 33.079894] 5:3:1: cannot get freq at ep 0x82
[ 38.204247] 5:3:1: cannot get freq at ep 0x82
[ 43.200699] 5:3:1: cannot get freq at ep 0x82
[ 47.628392] audit_printk_skb: 132 callbacks suppressed
[ 47.628395] type=1400 audit(1398621899.289:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2007 comm="apparmor_parser"
[ 47.628400] type=1400 audit(1398621899.289:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2007 comm="apparmor_parser"
[ 47.628758] type=1400 audit(1398621899.289:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2007 comm="apparmor_parser"
[ 701.466941] systemd-hostnamed[9215]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2036.064913] type=1400 audit(1398623889.141:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=9649 comm="apparmor_parser"
[ 2036.064921] type=1400 audit(1398623889.141:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=9649 comm="apparmor_parser"
[ 2036.065358] type=1400 audit(1398623889.141:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=9649 comm="apparmor_parser"
[ 2461.042603] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
dimitris@dimitris-P55M-UD2:~$

[the_eye]

Για δώσε και το

Κώδικας: Επιλογή όλων

lspci -nn