Συνεχή ανεξήγητα κολλήματα

[nikos_sib]

Παιδιά καλησπέρα...
Το 10.10 το εγκατέστησα λίγο καιρό μετά την κυκλοφορία του και γενικά δεν είχα προβλήματα..
Μου είχε κολλήσει καναδυό φορές αλλά σκέφτηκα πως μπορεί να ήταν τυχαίο..
Όμως από χτες μου έχει κολλήσει 5 φορές. Και όταν λέω κόλλημα, εννοώ κανονικά να μην αποκρίνεται σε τίποτα.
Απλά παγώνει η οθόνη εκεί που ήταν.. (Και δύο φορές μου έριξε επανεκκίνηση στα καλά καθούμενα..)

Τι μπορεί να φταίει? Όλες οι ενημερώσεις είναι εγκατεστημένες και η χρήση που κάνω είναι απλή: μουσική, ταινίες και κατεβάσματα.
5 φορές σε δύο μέρες. Φοβάμαι και για τα αρχεία μου

(κοιτώντας τα άλλα topics με πρόβλημα κολλημάτων, να πω πως έχω κάνει καθαρή εγκατάσταση απο το cd και στην nvidia κάρτα έχω βάλει τους οδηγούς που δίπλα γράφει "συνιστώμενο")

[s.dalas]

Αν πριν σου κολλήσει δίνει κάποια σημάδια πχ ακούγονται ανεμιστηράκια πιο δυνατά ή ψιλοκολλάει και μετά τα φτύνει τελείως, εκείνη τη στιγμή που ζορίζει δώσε σε ένα τερματικό την εντολή

Κώδικας: Επιλογή όλων

top

με το q σταματάει να τρέχει. Πάρε τα αποτελέσματα και κάντα εδώ αντιγραφή επικόλληση.

[nikos_sib]

Φίλε τίποτα δεν ακούγεται. Ούτε "προειδοποιεί" με κανένα τρόπο..
Και το ξανάκανε τώρα (πριν 6-7 λεπτά) και πλέον έχει αρχίσει και να με προβληματίζει.
3η ή 4η φορά σήμερα.. θα χάσω και το μέτρημα..

[s.dalas]

Όταν κλείνει σου βγάζει τίποτα γράμματα να λενε για υπερθερμανση ας πουμε και τέτοια ? Δες και δώσε μας και αυτά

Mε το System log Viewer:

Xorg.0.log

dmesg/dmesg.0

Και το .xsession-errrors. στο /home/youruserid

[Epirotes]

Desktop είναι το μηχάνημα; Δεν χάνεις τίποτα να το ανοίξεις και να το καθαρίσεις μέσα, ειδικά τα ανεμιστηράκια. Πρόσεχε μόνο να μην έχεις στατικό ηλεκτρισμό και κάψεις τίποτα. Πιάσει κάτι μεταλλικό (ατσάλινο) ώστε να εκκενωθεί η όποια φόρτιση πριν το ανοίξεις. Και μην βάλεις την ηλεκτρική σκούπα να ρουφήξει την σκόνη, γιατί υπάρχει ο ίδιος κίνδυνος. Ειδικά η επανεκκίνηση στα καλά καθούμενα, μάλλον για υπερθέρμανση μου μοιάζει.

[nikos_sib]

Ναι desktop είναι αλλά δε νομίζω να είναι απλά υπερθέρμανση.. Αλλιώς θα βούιζε όλο το δωμάτιο από τα ανεμιστηράκια..
Τα κολλήματα στα καλά καθούμενα σε ένα pc που απλά παίζει μουσική και έχει ένα deluge από πίσω να τρέχει δε μπορώ να καταλάβω.. Δε μπορεί να "μπουκώνει" Αφού τίποτα δεν κάνει!!

Αυτό με το log viewer πως να το κάνω? με απλη αντιγραφή-επικόλληση?
Τα log που δείχνει είναι τεράστια.. (δεν τα πολυξέρω αυτά...)

[Epirotes]

Ναι, αντιγραφή κι επικόλληση, αλλά μέσα σε code tags (Προβολή κώδικα, το κουμπάκι δίπλα στον γλόμπο στην μπάρα μορφοποίησης), δηλ. έτσι:

Κώδικας: Επιλογή όλων

[code]κείμενο[/code]

Και δεν είναι απαραίτητο να βουίζουν τα ανεμιστηράκια όταν υπερθερμαίνεται. Καλού-κακού ψάξε και δες πως να παρακολουθήσεις τις θερμοκρασίες. Εκτός κι αν φταίει το deluge; Την είπα την κακία μου, λογικά, δεν φταίει αυτό.

[nikos_sib]

Xorg.0.log :

Κώδικας: Επιλογή όλων

[ 30.477]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 30.477] X Protocol Version 11, Revision 0
[ 30.477] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[ 30.477] Current Operating System: Linux nikos-desktop 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686
[ 30.477] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=UUID=fb2a6e25-7ee8-4277-9371-b458b162fd76 ro quiet splash
[ 30.477] Build Date: 16 September 2010 05:39:22PM
[ 30.477] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support)
[ 30.477] Current version of pixman: 0.18.4
[ 30.477] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.477] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.477] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 27 00:21:06 2010
[ 30.477] (==) Using config file: "/etc/X11/xorg.conf"
[ 30.477] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.477] (==) No Layout section. Using the first Screen section.
[ 30.477] (**) |-->Screen "Default Screen" (0)
[ 30.477] (**) | |-->Monitor "<default monitor>"
[ 30.478] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 30.478] (**) | |-->Device "Default Device"
[ 30.478] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 30.478] (==) Automatically adding devices
[ 30.478] (==) Automatically enabling devices
[ 30.478] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 30.478] Entry deleted from font path.
[ 30.478] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 30.478] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 30.478] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.478] (II) Loader magic: 0x81f8e00
[ 30.478] (II) Module ABI versions:
[ 30.478] X.Org ANSI C Emulation: 0.4
[ 30.478] X.Org Video Driver: 8.0
[ 30.478] X.Org XInput driver : 11.0
[ 30.478] X.Org Server Extension : 4.0
[ 30.479] (--) PCI:*(0:1:0:0) 10de:0092:10de:0301 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
[ 30.479] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 30.479] (II) "extmod" will be loaded by default.
[ 30.479] (II) "dbe" will be loaded by default.
[ 30.479] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 30.479] (II) "record" will be loaded by default.
[ 30.479] (II) "dri" will be loaded by default.
[ 30.479] (II) "dri2" will be loaded by default.
[ 30.479] (II) LoadModule: "glx"
[ 30.480] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[ 30.535] (II) Module glx: vendor="NVIDIA Corporation"
[ 30.535] compiled for 4.0.2, module version = 1.0.0
[ 30.535] Module class: X.Org Server Extension
[ 30.535] (II) NVIDIA GLX Module 260.19.06 Mon Sep 13 07:01:31 PDT 2010
[ 30.535] (II) Loading extension GLX
[ 30.535] (II) LoadModule: "extmod"
[ 30.536] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 30.536] (II) Module extmod: vendor="X.Org Foundation"
[ 30.536] compiled for 1.9.0, module version = 1.0.0
[ 30.536] Module class: X.Org Server Extension
[ 30.536] ABI class: X.Org Server Extension, version 4.0
[ 30.536] (II) Loading extension MIT-SCREEN-SAVER
[ 30.536] (II) Loading extension XFree86-VidModeExtension
[ 30.536] (II) Loading extension XFree86-DGA
[ 30.536] (II) Loading extension DPMS
[ 30.536] (II) Loading extension XVideo
[ 30.536] (II) Loading extension XVideo-MotionCompensation
[ 30.536] (II) Loading extension X-Resource
[ 30.536] (II) LoadModule: "dbe"
[ 30.536] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 30.536] (II) Module dbe: vendor="X.Org Foundation"
[ 30.536] compiled for 1.9.0, module version = 1.0.0
[ 30.536] Module class: X.Org Server Extension
[ 30.536] ABI class: X.Org Server Extension, version 4.0
[ 30.536] (II) Loading extension DOUBLE-BUFFER
[ 30.536] (II) LoadModule: "record"
[ 30.537] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 30.537] (II) Module record: vendor="X.Org Foundation"
[ 30.537] compiled for 1.9.0, module version = 1.13.0
[ 30.537] Module class: X.Org Server Extension
[ 30.537] ABI class: X.Org Server Extension, version 4.0
[ 30.537] (II) Loading extension RECORD
[ 30.537] (II) LoadModule: "dri"
[ 30.537] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 30.537] (II) Module dri: vendor="X.Org Foundation"
[ 30.537] compiled for 1.9.0, module version = 1.0.0
[ 30.537] ABI class: X.Org Server Extension, version 4.0
[ 30.537] (II) Loading extension XFree86-DRI
[ 30.537] (II) LoadModule: "dri2"
[ 30.537] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.537] (II) Module dri2: vendor="X.Org Foundation"
[ 30.537] compiled for 1.9.0, module version = 1.2.0
[ 30.538] ABI class: X.Org Server Extension, version 4.0
[ 30.538] (II) Loading extension DRI2
[ 30.538] (II) LoadModule: "nvidia"
[ 30.538] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 30.538] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 30.538] compiled for 4.0.2, module version = 1.0.0
[ 30.538] Module class: X.Org Video Driver
[ 30.557] (II) NVIDIA dlloader X Driver 260.19.06 Mon Sep 13 06:37:13 PDT 2010
[ 30.557] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 30.557] (++) using VT number 7

[ 30.558] (II) Loading sub module "fb"
[ 30.558] (II) LoadModule: "fb"
[ 30.559] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.559] (II) Module fb: vendor="X.Org Foundation"
[ 30.559] compiled for 1.9.0, module version = 1.0.0
[ 30.559] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.559] (II) Loading sub module "wfb"
[ 30.559] (II) LoadModule: "wfb"
[ 30.559] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 30.559] (II) Module wfb: vendor="X.Org Foundation"
[ 30.559] compiled for 1.9.0, module version = 1.0.0
[ 30.559] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.559] (II) Loading sub module "ramdac"
[ 30.559] (II) LoadModule: "ramdac"
[ 30.559] (II) Module "ramdac" already built-in
[ 30.559] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 30.560] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 30.560] (==) NVIDIA(0): RGB weight 888
[ 30.560] (==) NVIDIA(0): Default visual is TrueColor
[ 30.560] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.560] (**) NVIDIA(0): Option "NoLogo" "True"
[ 30.560] (**) NVIDIA(0): Enabling RENDER acceleration
[ 30.560] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 30.560] (II) NVIDIA(0): enabled.
[ 31.846] (II) NVIDIA(0): NVIDIA GPU GeForce 7800 GT (G70) at PCI:1:0:0 (GPU-0)
[ 31.846] (--) NVIDIA(0): Memory: 262144 kBytes
[ 31.846] (--) NVIDIA(0): VideoBIOS: 05.70.02.13.02
[ 31.846] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 31.846] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 31.846] (--) NVIDIA(0): Connected display device(s) on GeForce 7800 GT at PCI:1:0:0
[ 31.846] (--) NVIDIA(0): LG Electronics L1780U (DFP-0)
[ 31.846] (--) NVIDIA(0): LG Electronics L1780U (DFP-0): 310.0 MHz maximum pixel clock
[ 31.846] (--) NVIDIA(0): LG Electronics L1780U (DFP-0): Internal Dual Link TMDS
[ 31.846] (WW) NVIDIA(0): The EDID for LG Electronics L1780U (DFP-0) contradicts itself:
[ 31.846] (WW) NVIDIA(0): mode "1280x1024" is specified in the EDID; however, the
[ 31.846] (WW) NVIDIA(0): EDID's valid HorizSync range (30.000-71.000 kHz) would
[ 31.847] (WW) NVIDIA(0): exclude this mode's HorizSync (80.0 kHz); ignoring
[ 31.847] (WW) NVIDIA(0): HorizSync check for mode "1280x1024".
[ 31.847] (WW) NVIDIA(0): The EDID for LG Electronics L1780U (DFP-0) contradicts itself:
[ 31.847] (WW) NVIDIA(0): mode "1280x1024" is specified in the EDID; however, the
[ 31.847] (WW) NVIDIA(0): EDID's valid HorizSync range (30.000-71.000 kHz) would
[ 31.847] (WW) NVIDIA(0): exclude this mode's HorizSync (80.0 kHz); ignoring
[ 31.847] (WW) NVIDIA(0): HorizSync check for mode "1280x1024".
[ 31.847] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 31.847] (==) NVIDIA(0):
[ 31.847] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 31.847] (==) NVIDIA(0): will be used as the requested mode.
[ 31.847] (==) NVIDIA(0):
[ 31.847] (II) NVIDIA(0): Validated modes:
[ 31.847] (II) NVIDIA(0): "nvidia-auto-select"
[ 31.847] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 31.849] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 31.850] (--) NVIDIA(0): option
[ 31.850] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 31.850] (--) Depth 24 pixmap format is 32 bpp
[ 31.851] (II) NVIDIA(0): Initialized GPU GART.
[ 31.865] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 31.990] (II) Loading extension NV-GLX
[ 32.041] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 32.055] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 32.055] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 32.055] (==) NVIDIA(0): Backing store disabled
[ 32.055] (==) NVIDIA(0): Silken mouse enabled
[ 32.056] (==) NVIDIA(0): DPMS enabled
[ 32.056] (II) Loading extension NV-CONTROL
[ 32.056] (II) Loading extension XINERAMA
[ 32.056] (II) Loading sub module "dri2"
[ 32.056] (II) LoadModule: "dri2"
[ 32.057] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 32.057] (II) NVIDIA(0): [DRI2] Setup complete
[ 32.057] (==) RandR enabled
[ 32.057] (II) Initializing built-in extension Generic Event Extension
[ 32.057] (II) Initializing built-in extension SHAPE
[ 32.057] (II) Initializing built-in extension MIT-SHM
[ 32.057] (II) Initializing built-in extension XInputExtension
[ 32.057] (II) Initializing built-in extension XTEST
[ 32.057] (II) Initializing built-in extension BIG-REQUESTS
[ 32.057] (II) Initializing built-in extension SYNC
[ 32.057] (II) Initializing built-in extension XKEYBOARD
[ 32.057] (II) Initializing built-in extension XC-MISC
[ 32.057] (II) Initializing built-in extension SECURITY
[ 32.057] (II) Initializing built-in extension XINERAMA
[ 32.057] (II) Initializing built-in extension XFIXES
[ 32.057] (II) Initializing built-in extension RENDER
[ 32.057] (II) Initializing built-in extension RANDR
[ 32.057] (II) Initializing built-in extension COMPOSITE
[ 32.057] (II) Initializing built-in extension DAMAGE
[ 32.057] (II) Initializing built-in extension GESTURE
[ 32.057] (II) Initializing extension GLX
[ 32.115] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 32.124] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 32.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.124] (II) LoadModule: "evdev"
[ 32.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.124] (II) Module evdev: vendor="X.Org Foundation"
[ 32.124] compiled for 1.9.0, module version = 2.3.2
[ 32.124] Module class: X.Org XInput Driver
[ 32.124] ABI class: X.Org XInput driver, version 11.0
[ 32.124] (**) Power Button: always reports core events
[ 32.124] (**) Power Button: Device: "/dev/input/event1"
[ 32.137] (II) Power Button: Found keys
[ 32.137] (II) Power Button: Configuring as keyboard
[ 32.137] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 32.137] (**) Option "xkb_rules" "evdev"
[ 32.137] (**) Option "xkb_model" "evdev"
[ 32.137] (**) Option "xkb_layout" "us,gr"
[ 32.137] (**) Option "xkb_variant" ","
[ 32.137] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 32.139] (II) XKB: reuse xkmfile /var/lib/xkb/server-0784873EABBE2F3F8DCDEC70A37F488F93ECB155.xkm
[ 32.141] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 32.141] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.141] (**) Power Button: always reports core events
[ 32.142] (**) Power Button: Device: "/dev/input/event0"
[ 32.153] (II) Power Button: Found keys
[ 32.153] (II) Power Button: Configuring as keyboard
[ 32.153] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 32.153] (**) Option "xkb_rules" "evdev"
[ 32.153] (**) Option "xkb_model" "evdev"
[ 32.153] (**) Option "xkb_layout" "us,gr"
[ 32.153] (**) Option "xkb_variant" ","
[ 32.153] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 32.158] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 32.158] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 32.158] (**) AT Translated Set 2 keyboard: always reports core events
[ 32.158] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 32.169] (II) AT Translated Set 2 keyboard: Found keys
[ 32.169] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 32.169] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 32.169] (**) Option "xkb_rules" "evdev"
[ 32.169] (**) Option "xkb_model" "evdev"
[ 32.169] (**) Option "xkb_layout" "us,gr"
[ 32.169] (**) Option "xkb_variant" ","
[ 32.169] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 32.169] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event3)
[ 32.169] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 32.170] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 32.170] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event3"
[ 32.170] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 32.170] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 32.170] (II) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 32.170] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 32.170] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 32.170] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 32.170] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.170] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[ 32.170] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 32.170] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 32.170] (II) No input driver/identifier specified (ignoring)


dmesg/dmesg.0 :

Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-24-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00f4760] f4760
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 375ad000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 009a7000 - 013e9075
[ 0.000000] Move RAMDISK from 00000000375ad000 - 0000000037fef074 to 009a7000 - 013e9074
[ 0.000000] ACPI: RSDP 000f8650 00014 (v00 RD480 )
[ 0.000000] ACPI: RSDT 7fef3040 00034 (v01 RD480 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fef30c0 00074 (v01 RD480 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fef3180 03E2B (v01 RD480 AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7fef0000 00040
[ 0.000000] ACPI: SRAT 7fef70c0 000A0 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: MCFG 7fef71c0 0003C (v01 RD480 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fef7000 00068 (v01 RD480 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] free_area_init_node: node 0, pgdat c07ffd00, node_mem_map c13eb200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294372 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x81
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36416 r0 d20928 u2097152
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=UUID=fb2a6e25-7ee8-4277-9371-b458b162fd76 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10480000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (46 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a2adc] TEXT DATA BSS
[ 0.000000] #3 [00009a3000 - 00009a60a8] BRK
[ 0.000000] #4 [00000f4770 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f4760 - 00000f4770] MP-table mpf
[ 0.000000] #6 [000009f000 - 00000f2864] BIOS reserved
[ 0.000000] #7 [00000f29b0 - 00000f4760] BIOS reserved
[ 0.000000] #8 [00000f2864 - 00000f29b0] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #12 [00009a7000 - 00013ea000] NEW RAMDISK
[ 0.000000] #13 [00013ea000 - 00013eb000] BOOTMEM
[ 0.000000] #14 [00013eb000 - 00023eb000] BOOTMEM
[ 0.000000] #15 [00023eb000 - 00023eb004] BOOTMEM
[ 0.000000] #16 [00023eb040 - 00023eb100] BOOTMEM
[ 0.000000] #17 [00023eb100 - 00023eb154] BOOTMEM
[ 0.000000] #18 [00023eb180 - 00023ee180] BOOTMEM
[ 0.000000] #19 [00023ee180 - 00023ee1f0] BOOTMEM
[ 0.000000] #20 [00023ee200 - 00023f4200] BOOTMEM
[ 0.000000] #21 [00023f4200 - 00023f4227] BOOTMEM
[ 0.000000] #22 [00023f4240 - 00023f433c] BOOTMEM
[ 0.000000] #23 [00023f4340 - 00023f4380] BOOTMEM
[ 0.000000] #24 [00023f4380 - 00023f43c0] BOOTMEM
[ 0.000000] #25 [00023f43c0 - 00023f4400] BOOTMEM
[ 0.000000] #26 [00023f4400 - 00023f4440] BOOTMEM
[ 0.000000] #27 [00023f4440 - 00023f4480] BOOTMEM
[ 0.000000] #28 [00023f4480 - 00023f44c0] BOOTMEM
[ 0.000000] #29 [00023f44c0 - 00023f4500] BOOTMEM
[ 0.000000] #30 [00023f4500 - 00023f4540] BOOTMEM
[ 0.000000] #31 [00023f4540 - 00023f4550] BOOTMEM
[ 0.000000] #32 [00023f4580 - 00023f45ea] BOOTMEM
[ 0.000000] #33 [00023f4600 - 00023f466a] BOOTMEM
[ 0.000000] #34 [0002400000 - 000240e000] BOOTMEM
[ 0.000000] #35 [0002600000 - 000260e000] BOOTMEM
[ 0.000000] #36 [00023f6680 - 00023f6684] BOOTMEM
[ 0.000000] #37 [00023f66c0 - 00023f66c4] BOOTMEM
[ 0.000000] #38 [00023f6700 - 00023f6708] BOOTMEM
[ 0.000000] #39 [00023f6740 - 00023f6748] BOOTMEM
[ 0.000000] #40 [00023f6780 - 00023f6828] BOOTMEM
[ 0.000000] #41 [00023f6840 - 00023f68a8] BOOTMEM
[ 0.000000] #42 [00023f68c0 - 00023fa8c0] BOOTMEM
[ 0.000000] #43 [000240e000 - 000248e000] BOOTMEM
[ 0.000000] #44 [000248e000 - 00024ce000] BOOTMEM
[ 0.000000] #45 [000260e000 - 000300c980] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fef0)
[ 0.000000] Memory: 2048656k/2096064k available (4931k kernel code, 46956k reserved, 2333k data, 688k init, 1186760k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0819000 - 0xc08c5000 ( 688 kB)
[ 0.000000] .data : 0xc05d0ebe - 0xc08184e8 (2333 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d0ebe (4931 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2288.059 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4576.11 BogoMIPS (lpj=9152236)
[ 0.008012] pid_max: default: 32768 minimum: 301
[ 0.008035] Security Framework initialized
[ 0.008061] AppArmor: AppArmor initialized
[ 0.008064] Yama: becoming mindful.
[ 0.008131] Mount-cache hash table entries: 512
[ 0.008287] Initializing cgroup subsys ns
[ 0.008292] Initializing cgroup subsys cpuacct
[ 0.008297] Initializing cgroup subsys memory
[ 0.008308] Initializing cgroup subsys devices
[ 0.008312] Initializing cgroup subsys freezer
[ 0.008315] Initializing cgroup subsys net_cls
[ 0.008344] CPU: Physical Processor ID: 0
[ 0.008347] CPU: Processor Core ID: 0
[ 0.008351] mce: CPU supports 5 MCE banks
[ 0.008369] Performance Events: AMD PMU driver.
[ 0.008377] ... version: 0
[ 0.008380] ... bit width: 48
[ 0.008383] ... generic registers: 4
[ 0.008385] ... value mask: 0000ffffffffffff
[ 0.008388] ... max period: 00007fffffffffff
[ 0.008391] ... fixed-purpose events: 0
[ 0.008393] ... event mask: 000000000000000f
[ 0.012402] ACPI: Core revision 20100428
[ 0.020035] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.020044] ftrace: allocating 21756 entries in 43 pages
[ 0.024096] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024444] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.065280] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
[ 0.068000] Booting Node 0, Processors #1 Ok.
[ 0.012000] Initializing CPU#1
[ 0.152080] Brought up 2 CPUs
[ 0.152084] Total of 2 processors activated (9152.19 BogoMIPS).
[ 0.152296] devtmpfs: initialized
[ 0.152918] regulator: core version 0.5
[ 0.152952] Time: 22:20:36 Date: 12/26/10
[ 0.152999] NET: Registered protocol family 16
[ 0.153129] EISA bus registered
[ 0.153135] node 0 link 0: io port [c000, ffff]
[ 0.153139] TOM: 0000000080000000 aka 2048M
[ 0.153142] node 0 link 0: mmio [a0000, bffff]
[ 0.153145] node 0 link 0: mmio [80000000, dfffffff]
[ 0.153148] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.153151] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.153154] bus: [00, 03] on node 0 link 0
[ 0.153158] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.153160] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.153163] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[ 0.153165] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.153172] ACPI: bus type pci registered
[ 0.153242] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.153246] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.153248] PCI: Using MMCONFIG for extended config space
[ 0.153249] PCI: Using configuration type 1 for base access
[ 0.154175] Trying to unpack rootfs image as initramfs...
[ 0.154175] bio: create slab <bio-0> at 0
[ 0.154175] ACPI: EC: Look up EC in DSDT
[ 0.160534] ACPI: Interpreter enabled
[ 0.160538] ACPI: (supports S0 S1 S4 S5)
[ 0.160559] ACPI: Using IOAPIC for interrupt routing
[ 0.164458] ACPI: No dock devices found.
[ 0.164462] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.164567] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.164734] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.164737] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.164740] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.164743] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.164746] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.164806] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.164809] pci 0000:00:02.0: PME# disabled
[ 0.164844] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.164846] pci 0000:00:04.0: PME# disabled
[ 0.164907] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.164916] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.164924] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.164933] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.164941] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.164949] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f1ff]
[ 0.164959] pci 0000:00:11.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.164990] pci 0000:00:11.0: supports D1 D2
[ 0.165037] pci 0000:00:12.0: reg 10: [io 0xfa00-0xfa07]
[ 0.165045] pci 0000:00:12.0: reg 14: [io 0xf900-0xf903]
[ 0.165054] pci 0000:00:12.0: reg 18: [io 0xf800-0xf807]
[ 0.165062] pci 0000:00:12.0: reg 1c: [io 0xf700-0xf703]
[ 0.165070] pci 0000:00:12.0: reg 20: [io 0xf600-0xf60f]
[ 0.165078] pci 0000:00:12.0: reg 24: [mem 0xfe02e000-0xfe02e1ff]
[ 0.165087] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.165118] pci 0000:00:12.0: supports D1 D2
[ 0.165159] pci 0000:00:13.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.165255] pci 0000:00:13.1: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.165358] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.165425] pci 0000:00:13.2: supports D1 D2
[ 0.165427] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.165432] pci 0000:00:13.2: PME# disabled
[ 0.165483] pci 0000:00:14.0: reg 10: [io 0x0400-0x040f]
[ 0.165491] pci 0000:00:14.0: reg 14: [mem 0xfe02a000-0xfe02a3ff]
[ 0.165526] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.165582] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.165591] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.165599] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.165607] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.165615] pci 0000:00:14.1: reg 20: [io 0xf400-0xf40f]
[ 0.165702] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.165763] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.165768] pci 0000:00:14.2: PME# disabled
[ 0.165966] PCI: peer root bus 00 res updated from pci conf
[ 0.166007] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.166016] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.166025] pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.166030] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.166036] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.166065] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.166073] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.166077] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.166081] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.166084] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.166143] pci 0000:02:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.166151] pci 0000:02:00.0: reg 18: [io 0xde00-0xdeff]
[ 0.166175] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.166212] pci 0000:02:00.0: supports D1 D2
[ 0.166214] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166219] pci 0000:02:00.0: PME# disabled
[ 0.166232] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.166240] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.166243] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.166247] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.166250] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.166316] pci 0000:03:08.0: reg 10: [io 0xcf00-0xcf07]
[ 0.166326] pci 0000:03:08.0: reg 14: [io 0xce00-0xce03]
[ 0.166336] pci 0000:03:08.0: reg 18: [io 0xcd00-0xcd07]
[ 0.166345] pci 0000:03:08.0: reg 1c: [io 0xcc00-0xcc03]
[ 0.166355] pci 0000:03:08.0: reg 20: [io 0xcb00-0xcb0f]
[ 0.166365] pci 0000:03:08.0: reg 24: [mem 0xfdbff000-0xfdbff3ff]
[ 0.166375] pci 0000:03:08.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.166404] pci 0000:03:08.0: supports D1 D2
[ 0.166451] pci 0000:03:09.0: reg 10: [mem 0xfdbfe000-0xfdbfe7ff]
[ 0.166462] pci 0000:03:09.0: reg 14: [io 0xca00-0xca7f]
[ 0.166531] pci 0000:03:09.0: supports D2
[ 0.166534] pci 0000:03:09.0: PME# supported from D2 D3hot D3cold
[ 0.166540] pci 0000:03:09.0: PME# disabled
[ 0.166594] pci 0000:03:0a.0: reg 10: [mem 0xfdbf8000-0xfdbfbfff]
[ 0.166604] pci 0000:03:0a.0: reg 14: [io 0xc800-0xc8ff]
[ 0.166644] pci 0000:03:0a.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.166682] pci 0000:03:0a.0: supports D1 D2
[ 0.166684] pci 0000:03:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166690] pci 0000:03:0a.0: PME# disabled
[ 0.166743] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.166751] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.166757] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.166762] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.166765] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.166768] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.166771] pci 0000:00:14.4: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
[ 0.166773] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.166787] pci_bus 0000:00: on NUMA node 0
[ 0.166791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.166956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.167063] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.167106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.181471] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.181550] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.181627] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.181703] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.181784] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
[ 0.181860] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11)
[ 0.181936] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *10 11)
[ 0.182013] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11)
[ 0.182051] HEST: Table is not found!
[ 0.182149] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.182154] vgaarb: loaded
[ 0.182324] SCSI subsystem initialized
[ 0.188181] libata version 3.00 loaded.
[ 0.188181] usbcore: registered new interface driver usbfs
[ 0.188181] usbcore: registered new interface driver hub
[ 0.188181] usbcore: registered new device driver usb
[ 0.188302] ACPI: WMI: Mapper loaded
[ 0.188304] PCI: Using ACPI for IRQ routing
[ 0.188307] PCI: pci_cache_line_size set to 64 bytes
[ 0.188401] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.188405] reserve RAM buffer: 000000007fef0000 - 000000007fffffff
[ 0.188504] NetLabel: Initializing
[ 0.188506] NetLabel: domain hash size = 128
[ 0.188507] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.188521] NetLabel: unlabeled traffic allowed by default
[ 0.198628] AppArmor: AppArmor Filesystem Enabled
[ 0.198650] pnp: PnP ACPI init
[ 0.198672] ACPI: bus type pnp registered
[ 0.199060] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:11.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.199068] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:00:12.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.199095] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.199101] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.199108] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:08.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.199116] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:0a.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.201257] pnp: PnP ACPI: found 14 devices
[ 0.201259] ACPI: ACPI bus type pnp unregistered
[ 0.201263] PnPBIOS: Disabled by ACPI PNP
[ 0.201276] system 00:01: [io 0x0140-0x015f] has been reserved
[ 0.201279] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.201281] system 00:01: [io 0x04d6] has been reserved
[ 0.201284] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.201287] system 00:01: [io 0x0c14] has been reserved
[ 0.201290] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.201293] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.201296] system 00:01: [io 0x0c6f] has been reserved
[ 0.201299] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.201301] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.201304] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.201309] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.201315] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.201318] system 00:06: [io 0x0220-0x0225] has been reserved
[ 0.201324] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.201329] system 00:0d: [mem 0x000d1000-0x000d3fff] has been reserved
[ 0.201332] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.201335] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.201338] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.201341] system 00:0d: [mem 0x7ff00000-0x7fffffff] could not be reserved
[ 0.201344] system 00:0d: [mem 0x7fef0000-0x7fefffff] could not be reserved
[ 0.201347] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.201350] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.201354] system 00:0d: [mem 0x00100000-0x7feeffff] could not be reserved
[ 0.201357] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.201360] system 00:0d: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.201363] system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.237313] Switching to clocksource acpi_pm
[ 0.237675] pci 0000:00:11.0: BAR 6: assigned [mem 0x80000000-0x8007ffff pref]
[ 0.237679] pci 0000:00:12.0: BAR 6: assigned [mem 0x80080000-0x800fffff pref]
[ 0.237683] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 0.237686] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.237689] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.237694] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.237698] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.237703] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.237706] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.237708] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.237712] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.237715] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.237720] pci 0000:03:08.0: BAR 6: assigned [mem 0xfde00000-0xfde7ffff pref]
[ 0.237723] pci 0000:03:0a.0: BAR 6: assigned [mem 0xfde80000-0xfde9ffff pref]
[ 0.237726] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.237729] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.237736] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.237742] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.237756] pci 0000:00:02.0: setting latency timer to 64
[ 0.237762] pci 0000:00:04.0: setting latency timer to 64
[ 0.237771] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.237773] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.237776] pci_bus 0000:00: resource 6 [mem 0x80000000-0xefffffff]
[ 0.237778] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.237781] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.237784] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.237786] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.237789] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.237791] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.237794] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.237796] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.237799] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.237802] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff pref]
[ 0.237804] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.237806] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.237809] pci_bus 0000:03: resource 6 [mem 0x80000000-0xefffffff]
[ 0.237812] pci_bus 0000:03: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.237852] NET: Registered protocol family 2
[ 0.237918] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.238230] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.239181] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.239710] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.239713] TCP reno registered
[ 0.239719] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.239737] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.239851] NET: Registered protocol family 1
[ 0.239864] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.429088] Freeing initrd memory: 10508k freed
[ 1.836021] pci 0000:00:13.2: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.836058] pci 0000:01:00.0: Boot video device
[ 1.836075] PCI: CLS 4 bytes, default 64
[ 1.836299] cpufreq-nforce2: No nForce2 chipset.
[ 1.836329] Scanning for low memory corruption every 60 seconds
[ 1.836437] audit: initializing netlink socket (disabled)
[ 1.836447] type=2000 audit(1293402037.836:1): initialized
[ 1.846632] highmem bounce pool size: 64 pages
[ 1.846637] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.848082] VFS: Disk quotas dquot_6.5.2
[ 1.848145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.848730] fuse init (API version 7.14)
[ 1.848836] msgmni has been set to 1703
[ 1.851601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.851606] io scheduler noop registered
[ 1.851608] io scheduler deadline registered
[ 1.851621] io scheduler cfq registered (default)
[ 1.851735] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.851756] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.851790] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.851814] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.852010] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.852016] ACPI: Power Button [PWRB]
[ 1.852072] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.852076] ACPI: Power Button [PWRF]
[ 1.852128] ACPI: Fan [FAN] (on)
[ 1.852304] ACPI: acpi_idle registered with cpuidle
[ 1.854278] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.854284] ACPI: Thermal Zone [THRM] (-127 C)
[ 1.854333] ERST: Table is not found!
[ 1.854402] isapnp: Scanning for PnP cards...
[ 1.854508] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.854643] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.854772] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.855076] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.856152] brd: module loaded
[ 1.856618] loop: module loaded
[ 1.856843] alloc irq_desc for 23 on node -1
[ 1.856845] alloc kstat_irqs on node -1
[ 1.856854] pata_acpi 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.856919] alloc irq_desc for 22 on node -1
[ 1.856921] alloc kstat_irqs on node -1
[ 1.856925] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.856954] alloc irq_desc for 16 on node -1
[ 1.856956] alloc kstat_irqs on node -1
[ 1.856960] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.857326] Fixed MDIO Bus: probed
[ 1.857363] PPP generic driver version 2.4.2
[ 1.857397] tun: Universal TUN/TAP device driver, 1.6
[ 1.857399] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.857481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.857500] alloc irq_desc for 19 on node -1
[ 1.857502] alloc kstat_irqs on node -1
[ 1.857506] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.857527] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.857561] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 1.857625] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
[ 1.869024] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.869139] hub 1-0:1.0: USB hub found
[ 1.869144] hub 1-0:1.0: 8 ports detected
[ 1.869232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.869246] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.869256] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.869285] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.869303] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
[ 1.929089] hub 2-0:1.0: USB hub found
[ 1.929097] hub 2-0:1.0: 4 ports detected
[ 1.929159] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.929169] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.929202] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.929218] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
[ 1.989088] hub 3-0:1.0: USB hub found
[ 1.989096] hub 3-0:1.0: 4 ports detected
[ 1.989165] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.989251] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.991529] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.991535] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.991630] mice: PS/2 mouse device common for all mice
[ 1.991753] rtc_cmos 00:03: RTC can wake from S4
[ 1.991789] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.991817] rtc0: alarms up to one month, 242 bytes nvram
[ 1.991919] device-mapper: uevent: version 1.0.3
[ 1.992037] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.992103] device-mapper: multipath: version 1.1.1 loaded
[ 1.992106] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.992218] EISA: Probing bus 0 at eisa.0
[ 1.992221] EISA: Cannot allocate resource for mainboard
[ 1.992223] Cannot allocate resource for EISA slot 1
[ 1.992226] Cannot allocate resource for EISA slot 2
[ 1.992228] Cannot allocate resource for EISA slot 3
[ 1.992230] Cannot allocate resource for EISA slot 4
[ 1.992232] Cannot allocate resource for EISA slot 5
[ 1.992235] Cannot allocate resource for EISA slot 6
[ 1.992237] Cannot allocate resource for EISA slot 7
[ 1.992239] Cannot allocate resource for EISA slot 8
[ 1.992241] EISA: Detected 0 cards.
[ 1.992322] cpuidle: using governor ladder
[ 1.992324] cpuidle: using governor menu
[ 1.992606] TCP cubic registered
[ 1.992725] NET: Registered protocol family 10
[ 1.993077] lo: Disabled Privacy Extensions
[ 1.993281] NET: Registered protocol family 17
[ 1.993314] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[ 1.993326] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 1.993327] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 1.993347] Using IPI No-Shortcut mode
[ 1.993425] PM: Resume from disk failed.
[ 1.993438] registered taskstats version 1
[ 1.993730] Magic number: 6:597:351
[ 1.993840] rtc_cmos 00:03: setting system clock to 2010-12-26 22:20:38 UTC (1293402038)
[ 1.993844] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.993845] EDD information not available.
[ 2.009968] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.208641] isapnp: No Plug & Play device found
[ 2.208681] Freeing unused kernel memory: 688k freed
[ 2.209267] Write protecting the kernel text: 4932k
[ 2.209304] Write protecting the kernel read-only data: 1980k
[ 2.227774] udev[75]: starting version 163
[ 2.334620] scsi0 : pata_atiixp
[ 2.340442] sky2: driver version 1.28
[ 2.340505] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.340523] sky2 0000:02:00.0: setting latency timer to 64
[ 2.340562] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
[ 2.359912] skge 0000:03:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 9
[ 2.359978] skge: 1.13 addr 0xfdbf8000 irq 9 chip Yukon-Lite rev 9
[ 2.365075] Floppy drive(s): fd0 is 1.44M
[ 2.366053] scsi1 : pata_atiixp
[ 2.367095] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.367099] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.367328] sata_sil 0000:00:11.0: version 2.4
[ 2.374316] skge 0000:03:0a.0: eth1: addr 00:01:29:d2:f8:d5
[ 2.374370] sky2 0000:02:00.0: eth0: addr 00:01:29:d2:f8:71
[ 2.378338] scsi2 : sata_sil
[ 2.382494] scsi3 : sata_sil
[ 2.382724] ata3: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 23
[ 2.382729] ata4: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 23
[ 2.382920] scsi4 : sata_sil
[ 2.382980] scsi5 : sata_sil
[ 2.383113] ata5: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 22
[ 2.383117] ata6: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 22
[ 2.383191] sata_sil 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.383213] sata_sil 0000:03:08.0: Applying R_ERR on DMA activate FIS errata fix
[ 2.384741] scsi6 : sata_sil
[ 2.384949] FDC 0 is a post-1991 82077
[ 2.384983] scsi7 : sata_sil
[ 2.385214] scsi8 : sata_sil
[ 2.385304] scsi9 : sata_sil
[ 2.385361] ata7: SATA max UDMA/100 mmio m1024@0xfdbff000 tf 0xfdbff080 irq 23
[ 2.385366] ata8: SATA max UDMA/100 mmio m1024@0xfdbff000 tf 0xfdbff0c0 irq 23
[ 2.385371] ata9: SATA max UDMA/100 mmio m1024@0xfdbff000 tf 0xfdbff280 irq 23
[ 2.385375] ata10: SATA max UDMA/100 mmio m1024@0xfdbff000 tf 0xfdbff2c0 irq 23
[ 2.548614] ata2.00: ATAPI: Optiarc DVD RW AD-5200A, 1.01, max UDMA/66
[ 2.548643] ata2.01: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[ 2.564561] ata2.00: configured for UDMA/66
[ 2.580537] ata2.01: configured for UDMA/33
[ 2.583294] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-5200A 1.01 PQ: 0 ANSI: 5
[ 2.588231] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.588234] Uniform CD-ROM driver Revision: 3.20
[ 2.588349] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.588411] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.589015] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[ 2.593097] sr1: scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
[ 2.593175] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.593220] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 2.700045] ata3: SATA link down (SStatus 0 SControl 310)
[ 2.700105] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.704047] ata7: SATA link down (SStatus 0 SControl 310)
[ 2.709450] ata5.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
[ 2.709452] ata5.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.724462] ata5.00: configured for UDMA/100
[ 3.020041] ata4: SATA link down (SStatus 0 SControl 310)
[ 3.020213] scsi 4:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
[ 3.020398] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.020409] sd 4:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 3.020479] sd 4:0:0:0: [sda] Write Protect is off
[ 3.020482] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.020505] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.020684] sda: sda1 sda2 < sda5 sda6 >
[ 3.067555] sd 4:0:0:0: [sda] Attached SCSI disk
[ 3.344060] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.352549] ata6.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 3.352554] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.368526] ata6.00: configured for UDMA/100
[ 3.368682] scsi 5:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 3.368873] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 3.369014] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.369061] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.369064] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.369085] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.369222] sdb: sdb1
[ 3.377679] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 3.378239] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.378246] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.688047] ata8: SATA link down (SStatus 0 SControl 310)
[ 4.008046] ata9: SATA link down (SStatus 0 SControl 310)
[ 4.328108] ata10: SATA link down (SStatus 0 SControl 310)
[ 4.330226] alloc irq_desc for 20 on node -1
[ 4.330230] alloc kstat_irqs on node -1
[ 4.330244] firewire_ohci 0000:03:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.350332] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 4.350344] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 541614
[ 4.350434] EXT4-fs (sda1): 1 orphan inode deleted
[ 4.350437] EXT4-fs (sda1): recovery complete
[ 4.401699] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.428046] firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[ 4.916129] firewire_core: created device fw0: GUID 000129200003c736, S400
[ 13.993399] udev[385]: starting version 163
[ 14.048079] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.060840] Adding 2928636k swap on /dev/sda5. Priority:-1 extents:1 across:2928636k
[ 14.081722] lp: driver loaded but no devices found
[ 14.128161] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0
[ 14.150183] Linux agpgart interface v0.103
[ 14.382898] psmouse serio1: ID: 10 00 64
[ 14.432000] nvidia: module license 'NVIDIA' taints kernel.
[ 14.432005] Disabling lock debugging due to kernel taint
[ 14.466390] type=1400 audit(1293402050.966:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=628 comm="apparmor_parser"
[ 14.466666] type=1400 audit(1293402050.966:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=628 comm="apparmor_parser"
[ 14.466826] type=1400 audit(1293402050.966:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=628 comm="apparmor_parser"
[ 14.512835] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.551143] hda_codec: ALC882: BIOS auto-probing.
[ 15.074456] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 15.704661] alloc irq_desc for 18 on node -1
[ 15.704665] alloc kstat_irqs on node -1
[ 15.704675] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.704684] nvidia 0000:01:00.0: setting latency timer to 64
[ 15.704691] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 15.704977] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 25.561249] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 27.934833] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 29.572276] ppdev: user-space parallel port driver
[ 29.581082] sky2 0000:02:00.0: eth0: enabling interface
[ 29.593611] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.597051] skge 0000:03:0a.0: eth1: enabling interface
[ 29.597088] type=1400 audit(1293402066.098:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=917 comm="apparmor_parser"
[ 29.599939] type=1400 audit(1293402066.098:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=918 comm="apparmor_parser"
[ 29.600231] type=1400 audit(1293402066.102:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=918 comm="apparmor_parser"
[ 29.600402] type=1400 audit(1293402066.102:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=918 comm="apparmor_parser"
[ 29.605819] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 29.632554] type=1400 audit(1293402066.134:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=984 comm="apparmor_parser"
[ 29.637641] type=1400 audit(1293402066.138:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=998 comm="apparmor_parser"
[ 29.638014] type=1400 audit(1293402066.138:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=998 comm="apparmor_parser"
[ 29.646016] type=1400 audit(1293402066.146:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=984 comm="apparmor_parser"
[ 29.650167] type=1400 audit(1293402066.150:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1001 comm="apparmor_parser"
[ 29.652213] type=1400 audit(1293402066.154:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=984 comm="apparmor_parser"
[ 30.557683] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 30.557686] vboxdrv: Successfully done.
[ 30.557689] vboxdrv: Found 2 processor cores.
[ 30.558688] vboxdrv: fAsync=1 offMin=0x95892 offMax=0x95892
[ 30.565053] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 30.565059] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).


Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-24-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00f4760] f4760
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 375ad000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 009a7000 - 013e9075
[ 0.000000] Move RAMDISK from 00000000375ad000 - 0000000037fef074 to 009a7000 - 013e9074
[ 0.000000] ACPI: RSDP 000f8650 00014 (v00 RD480 )
[ 0.000000] ACPI: RSDT 7fef3040 00034 (v01 RD480 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fef30c0 00074 (v01 RD480 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fef3180 03E2B (v01 RD480 AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7fef0000 00040
[ 0.000000] ACPI: SRAT 7fef70c0 000A0 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: MCFG 7fef71c0 0003C (v01 RD480 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fef7000 00068 (v01 RD480 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] free_area_init_node: node 0, pgdat c07ffd00, node_mem_map c13eb200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294372 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x81
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36416 r0 d20928 u2097152
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=UUID=fb2a6e25-7ee8-4277-9371-b458b162fd76 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10480000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (46 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a2adc] TEXT DATA BSS
[ 0.000000] #3 [00009a3000 - 00009a60a8] BRK
[ 0.000000] #4 [00000f4770 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f4760 - 00000f4770] MP-table mpf
[ 0.000000] #6 [000009f000 - 00000f2864] BIOS reserved
[ 0.000000] #7 [00000f29b0 - 00000f4760] BIOS reserved
[ 0.000000] #8 [00000f2864 - 00000f29b0] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #12 [00009a7000 - 00013ea000] NEW RAMDISK
[ 0.000000] #13 [00013ea000 - 00013eb000] BOOTMEM
[ 0.000000] #14 [00013eb000 - 00023eb000] BOOTMEM
[ 0.000000] #15 [00023eb000 - 00023eb004] BOOTMEM
[ 0.000000] #16 [00023eb040 - 00023eb100] BOOTMEM
[ 0.000000] #17 [00023eb100 - 00023eb154] BOOTMEM
[ 0.000000] #18 [00023eb180 - 00023ee180] BOOTMEM
[ 0.000000] #19 [00023ee180 - 00023ee1f0] BOOTMEM
[ 0.000000] #20 [00023ee200 - 00023f4200] BOOTMEM
[ 0.000000] #21 [00023f4200 - 00023f4227] BOOTMEM
[ 0.000000] #22 [00023f4240 - 00023f433c] BOOTMEM
[ 0.000000] #23 [00023f4340 - 00023f4380] BOOTMEM
[ 0.000000] #24 [00023f4380 - 00023f43c0] BOOTMEM
[ 0.000000] #25 [00023f43c0 - 00023f4400] BOOTMEM
[ 0.000000] #26 [00023f4400 - 00023f4440] BOOTMEM
[ 0.000000] #27 [00023f4440 - 00023f4480] BOOTMEM
[ 0.000000] #28 [00023f4480 - 00023f44c0] BOOTMEM
[ 0.000000] #29 [00023f44c0 - 00023f4500] BOOTMEM
[ 0.000000] #30 [00023f4500 - 00023f4540] BOOTMEM
[ 0.000000] #31 [00023f4540 - 00023f4550] BOOTMEM
[ 0.000000] #32 [00023f4580 - 00023f45ea] BOOTMEM
[ 0.000000] #33 [00023f4600 - 00023f466a] BOOTMEM
[ 0.000000] #34 [0002400000 - 000240e000] BOOTMEM
[ 0.000000] #35 [0002600000 - 000260e000] BOOTMEM
[ 0.000000] #36 [00023f6680 - 00023f6684] BOOTMEM
[ 0.000000] #37 [00023f66c0 - 00023f66c4] BOOTMEM
[ 0.000000] #38 [00023f6700 - 00023f6708] BOOTMEM
[ 0.000000] #39 [00023f6740 - 00023f6748] BOOTMEM
[ 0.000000] #40 [00023f6780 - 00023f6828] BOOTMEM
[ 0.000000] #41 [00023f6840 - 00023f68a8] BOOTMEM
[ 0.000000] #42 [00023f68c0 - 00023fa8c0] BOOTMEM
[ 0.000000] #43 [000240e000 - 000248e000] BOOTMEM
[ 0.000000] #44 [000248e000 - 00024ce000] BOOTMEM
[ 0.000000] #45 [000260e000 - 000300c980] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fef0)
[ 0.000000] Memory: 2048656k/2096064k available (4931k kernel code, 46956k reserved, 2333k data, 688k init, 1186760k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0819000 - 0xc08c5000 ( 688 kB)
[ 0.000000] .data : 0xc05d0ebe - 0xc08184e8 (2333 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d0ebe (4931 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2287.795 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4575.59 BogoMIPS (lpj=9151180)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004035] Security Framework initialized
[ 0.004061] AppArmor: AppArmor initialized
[ 0.004063] Yama: becoming mindful.
[ 0.004130] Mount-cache hash table entries: 512
[ 0.004286] Initializing cgroup subsys ns
[ 0.004291] Initializing cgroup subsys cpuacct
[ 0.004296] Initializing cgroup subsys memory
[ 0.004307] Initializing cgroup subsys devices
[ 0.004311] Initializing cgroup subsys freezer
[ 0.004314] Initializing cgroup subsys net_cls
[ 0.004343] CPU: Physical Processor ID: 0
[ 0.004346] CPU: Processor Core ID: 0
[ 0.004350] mce: CPU supports 5 MCE banks
[ 0.004367] Performance Events: AMD PMU driver.
[ 0.004376] ... version: 0
[ 0.004379] ... bit width: 48
[ 0.004381] ... generic registers: 4
[ 0.004384] ... value mask: 0000ffffffffffff
[ 0.004387] ... max period: 00007fffffffffff
[ 0.004389] ... fixed-purpose events: 0
[ 0.004392] ... event mask: 000000000000000f
[ 0.008603] ACPI: Core revision 20100428
[ 0.016036] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.016044] ftrace: allocating 21756 entries in 43 pages
[ 0.020096] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020446] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.062222] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
[ 0.064000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.148070] Brought up 2 CPUs
[ 0.148073] Total of 2 processors activated (9151.67 BogoMIPS).
[ 0.148286] devtmpfs: initialized
[ 0.148918] regulator: core version 0.5
[ 0.148952] Time: 17:42:49 Date: 12/26/10
[ 0.149000] NET: Registered protocol family 16
[ 0.149130] EISA bus registered
[ 0.149135] node 0 link 0: io port [c000, ffff]
[ 0.149139] TOM: 0000000080000000 aka 2048M
[ 0.149142] node 0 link 0: mmio [a0000, bffff]
[ 0.149146] node 0 link 0: mmio [80000000, dfffffff]
[ 0.149149] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.149152] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.149155] bus: [00, 03] on node 0 link 0
[ 0.149159] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.149161] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.149163] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[ 0.149166] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.149173] ACPI: bus type pci registered
[ 0.149243] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.149247] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.149248] PCI: Using MMCONFIG for extended config space
[ 0.149250] PCI: Using configuration type 1 for base access
[ 0.150175] Trying to unpack rootfs image as initramfs...
[ 0.150175] bio: create slab <bio-0> at 0
[ 0.150175] ACPI: EC: Look up EC in DSDT
[ 0.156533] ACPI: Interpreter enabled
[ 0.156536] ACPI: (supports S0 S1 S4 S5)
[ 0.156556] ACPI: Using IOAPIC for interrupt routing
[ 0.160440] ACPI: No dock devices found.
[ 0.160444] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.160548] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.160716] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.160719] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.160722] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.160725] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.160727] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.160788] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.160791] pci 0000:00:02.0: PME# disabled
[ 0.160826] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.160829] pci 0000:00:04.0: PME# disabled
[ 0.160890] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.160898] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.160906] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.160915] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.160923] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.160931] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f1ff]
[ 0.160940] pci 0000:00:11.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.160972] pci 0000:00:11.0: supports D1 D2
[ 0.161019] pci 0000:00:12.0: reg 10: [io 0xfa00-0xfa07]
[ 0.161027] pci 0000:00:12.0: reg 14: [io 0xf900-0xf903]
[ 0.161035] pci 0000:00:12.0: reg 18: [io 0xf800-0xf807]
[ 0.161043] pci 0000:00:12.0: reg 1c: [io 0xf700-0xf703]
[ 0.161052] pci 0000:00:12.0: reg 20: [io 0xf600-0xf60f]
[ 0.161060] pci 0000:00:12.0: reg 24: [mem 0xfe02e000-0xfe02e1ff]
[ 0.161069] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.161100] pci 0000:00:12.0: supports D1 D2
[ 0.161141] pci 0000:00:13.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.161238] pci 0000:00:13.1: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.161341] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.161408] pci 0000:00:13.2: supports D1 D2
[ 0.161410] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.161415] pci 0000:00:13.2: PME# disabled
[ 0.161465] pci 0000:00:14.0: reg 10: [io 0x0400-0x040f]
[ 0.161474] pci 0000:00:14.0: reg 14: [mem 0xfe02a000-0xfe02a3ff]
[ 0.161509] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.161565] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.161573] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.161581] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.161590] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.161598] pci 0000:00:14.1: reg 20: [io 0xf400-0xf40f]
[ 0.161684] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.161745] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.161750] pci 0000:00:14.2: PME# disabled
[ 0.161948] PCI: peer root bus 00 res updated from pci conf
[ 0.161989] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.161998] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.162007] pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.162012] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.162018] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.162046] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.162055] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.162059] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.162063] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.162066] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.162125] pci 0000:02:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.162132] pci 0000:02:00.0: reg 18: [io 0xde00-0xdeff]
[ 0.162157] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.162194] pci 0000:02:00.0: supports D1 D2
[ 0.162196] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162201] pci 0000:02:00.0: PME# disabled
[ 0.162214] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.162222] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.162226] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.162229] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.162232] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.162299] pci 0000:03:08.0: reg 10: [io 0xcf00-0xcf07]
[ 0.162309] pci 0000:03:08.0: reg 14: [io 0xce00-0xce03]
[ 0.162318] pci 0000:03:08.0: reg 18: [io 0xcd00-0xcd07]
[ 0.162328] pci 0000:03:08.0: reg 1c: [io 0xcc00-0xcc03]
[ 0.162337] pci 0000:03:08.0: reg 20: [io 0xcb00-0xcb0f]
[ 0.162347] pci 0000:03:08.0: reg 24: [mem 0xfdbff000-0xfdbff3ff]
[ 0.162357] pci 0000:03:08.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.162386] pci 0000:03:08.0: supports D1 D2
[ 0.162433] pci 0000:03:09.0: reg 10: [mem 0xfdbfe000-0xfdbfe7ff]
[ 0.162444] pci 0000:03:09.0: reg 14: [io 0xca00-0xca7f]
[ 0.162514] pci 0000:03:09.0: supports D2
[ 0.162516] pci 0000:03:09.0: PME# supported from D2 D3hot D3cold
[ 0.162522] pci 0000:03:09.0: PME# disabled
[ 0.162576] pci 0000:03:0a.0: reg 10: [mem 0xfdbf8000-0xfdbfbfff]
[ 0.162586] pci 0000:03:0a.0: reg 14: [io 0xc800-0xc8ff]
[ 0.162625] pci 0000:03:0a.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.162663] pci 0000:03:0a.0: supports D1 D2
[ 0.162666] pci 0000:03:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162671] pci 0000:03:0a.0: PME# disabled
[ 0.162724] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.162732] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.162738] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.162744] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.162746] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.162749] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.162752] pci 0000:00:14.4: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
[ 0.162755] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.162768] pci_bus 0000:00: on NUMA node 0
[ 0.162772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.162937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.163044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.163087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.177488] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.177567] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.177644] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.177720] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.177800] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
[ 0.177876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11)
[ 0.177952] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *10 11)
[ 0.178029] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11)
[ 0.178067] HEST: Table is not found!
[ 0.178164] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.178169] vgaarb: loaded
[ 0.178332] SCSI subsystem initialized
[ 0.184162] libata version 3.00 loaded.
[ 0.184162] usbcore: registered new interface driver usbfs
[ 0.184162] usbcore: registered new interface driver hub
[ 0.184165] usbcore: registered new device driver usb
[ 0.184301] ACPI: WMI: Mapper loaded
[ 0.184303] PCI: Using ACPI for IRQ routing
[ 0.184306] PCI: pci_cache_line_size set to 64 bytes
[ 0.184401] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.184405] reserve RAM buffer: 000000007fef0000 - 000000007fffffff
[ 0.184503] NetLabel: Initializing
[ 0.184505] NetLabel: domain hash size = 128
[ 0.184507] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.184520] NetLabel: unlabeled traffic allowed by default
[ 0.194606] AppArmor: AppArmor Filesystem Enabled
[ 0.194629] pnp: PnP ACPI init
[ 0.194651] ACPI: bus type pnp registered
[ 0.195034] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:11.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.195041] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:00:12.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.195068] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.195074] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.195081] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:08.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.195089] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:0a.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.197238] pnp: PnP ACPI: found 14 devices
[ 0.197240] ACPI: ACPI bus type pnp unregistered
[ 0.197244] PnPBIOS: Disabled by ACPI PNP
[ 0.197256] system 00:01: [io 0x0140-0x015f] has been reserved
[ 0.197259] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.197262] system 00:01: [io 0x04d6] has been reserved
[ 0.197265] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.197267] system 00:01: [io 0x0c14] has been reserved
[ 0.197270] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.197273] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.197275] system 00:01: [io 0x0c6f] has been reserved
[ 0.197278] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.197281] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.197283] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.197288] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.197295] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.197298] system 00:06: [io 0x0220-0x0225] has been reserved
[ 0.197304] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.197309] system 00:0d: [mem 0x000d1000-0x000d3fff] has been reserved
[ 0.197312] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.197315] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.197318] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.197321] system 00:0d: [mem 0x7ff00000-0x7fffffff] could not be reserved
[ 0.197324] system 00:0d: [mem 0x7fef0000-0x7fefffff] could not be reserved
[ 0.197327] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.197330] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.197333] system 00:0d: [mem 0x00100000-0x7feeffff] could not be reserved
[ 0.197336] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.197339] system 00:0d: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.197342] system 00:0d: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.233298] Switching to clocksource acpi_pm
[ 0.233673] pci 0000:00:11.0: BAR 6: assigned [mem 0x80000000-0x8007ffff pref]
[ 0.233677] pci 0000:00:12.0: BAR 6: assigned [mem 0x80080000-0x800fffff pref]
[ 0.233681] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 0.233684] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.233687] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.233691] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.233695] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.233700] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.233703] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.233705] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.233709] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.233712] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.233717] pci 0000:03:08.0: BAR 6: assigned [mem 0xfde00000-0xfde7ffff pref]
[ 0.233720] pci 0000:03:0a.0: BAR 6: assigned [mem 0xfde80000-0xfde9ffff pref]
[ 0.233723] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.233726] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.233733] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.233739] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.233754] pci 0000:00:02.0: setting latency timer to 64
[ 0.233759] pci 0000:00:04.0: setting latency timer to 64
[ 0.233768] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.233771] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.233773] pci_bus 0000:00: resource 6 [mem 0x80000000-0xefffffff]
[ 0.233776] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.233778] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.233781] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.233784] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.233786] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.233789] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.233791] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.233794] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.233796] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.233799] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff pref]
[ 0.233801] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.233804] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.233806] pci_bus 0000:03: resource 6 [mem 0x80000000-0xefffffff]
[ 0.233809] pci_bus 0000:03: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.233849] NET: Registered protocol family 2
[ 0.233915] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.234228] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.235184] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.235711] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.235714] TCP reno registered
[ 0.235720] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.235737] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.235851] NET: Registered protocol family 1
[ 0.235863] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.425094] Freeing initrd memory: 10508k freed
[ 1.832022] pci 0000:00:13.2: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.832058] pci 0000:01:00.0: Boot video device
[ 1.832075] PCI: CLS 4 bytes, default 64
[ 1.832298] cpufreq-nforce2: No nForce2 chipset.
[ 1.832329] Scanning for low memory corruption every 60 seconds
[ 1.832436] audit: initializing netlink socket (disabled)
[ 1.832447] type=2000 audit(1293385369.832:1): initialized
[ 1.842632] highmem bounce pool size: 64 pages
[ 1.842638] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.844193] VFS: Disk quotas dquot_6.5.2
[ 1.844256] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.844842] fuse init (API version 7.14)
[ 1.844949] msgmni has been set to 1703
[ 1.847716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.847720] io scheduler noop registered
[ 1.847722] io scheduler deadline registered
[ 1.847736] io scheduler cfq registered (default)
[ 1.847850] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.847871] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.847905] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.847929] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.848125] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.848131] ACPI: Power Button [PWRB]
[ 1.848187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.848190] ACPI: Power Button [PWRF]
[ 1.848242] ACPI: Fan [FAN] (on)
[ 1.848419] ACPI: acpi_idle registered with cpuidle
[ 1.850391] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.850398] ACPI: Thermal Zone [THRM] (-127 C)
[ 1.850447] ERST: Table is not found!
[ 1.850516] isapnp: Scanning for PnP cards...
[ 1.850621] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.850756] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.850885] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.851190] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.852264] brd: module loaded
[ 1.852730] loop: module loaded
[ 1.852956] alloc irq_desc for 23 on node -1
[ 1.852959] alloc kstat_irqs on node -1
[ 1.852967] pata_acpi 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.853060] alloc irq_desc for 22 on node -1
[ 1.853062] alloc kstat_irqs on node -1
[ 1.853066] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.853096] alloc irq_desc for 16 on node -1
[ 1.853098] alloc kstat_irqs on node -1
[ 1.853102] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.853442] Fixed MDIO Bus: probed
[ 1.853480] PPP generic driver version 2.4.2
[ 1.853514] tun: Universal TUN/TAP device driver, 1.6
[ 1.853516] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.853598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.853618] alloc irq_desc for 19 on node -1
[ 1.853619] alloc kstat_irqs on node -1
[ 1.853623] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.853645] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.853678] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 1.853742] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
[ 1.865024] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.865137] hub 1-0:1.0: USB hub found
[ 1.865142] hub 1-0:1.0: 8 ports detected
[ 1.865230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.865244] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.865254] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.865283] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.865301] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
[ 1.925089] hub 2-0:1.0: USB hub found
[ 1.925097] hub 2-0:1.0: 4 ports detected
[ 1.925158] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.925168] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.925201] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.925217] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
[ 1.985088] hub 3-0:1.0: USB hub found
[ 1.985095] hub 3-0:1.0: 4 ports detected
[ 1.985164] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.985250] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.987530] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.987536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.987631] mice: PS/2 mouse device common for all mice
[ 1.987752] rtc_cmos 00:03: RTC can wake from S4
[ 1.987788] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.987817] rtc0: alarms up to one month, 242 bytes nvram
[ 1.987918] device-mapper: uevent: version 1.0.3
[ 1.988034] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.988101] device-mapper: multipath: version 1.1.1 loaded
[ 1.988104] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.988216] EISA: Probing bus 0 at eisa.0
[ 1.988219] EISA: Cannot allocate resource for mainboard
[ 1.988222] Cannot allocate resource for EISA slot 1
[ 1.988224] Cannot allocate resource for EISA slot 2
[ 1.988226] Cannot allocate resource for EISA slot 3
[ 1.988228] Cannot allocate resource for EISA slot 4
[ 1.988230] Cannot allocate resource for EISA slot 5
[ 1.988233] Cannot allocate resource for EISA slot 6
[ 1.988235] Cannot allocate resource for EISA slot 7
[ 1.988237] Cannot allocate resource for EISA slot 8
[ 1.988239] EISA: Detected 0 cards.
[ 1.988320] cpuidle: using governor ladder
[ 1.988322] cpuidle: using governor menu
[ 1.988605] TCP cubic registered
[ 1.988724] NET: Registered protocol family 10
[ 1.989076] lo: Disabled Privacy Extensions
[ 1.989280] NET: Registered protocol family 17
[ 1.989312] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[ 1.989325] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 1.989326] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 1.989345] Using IPI No-Shortcut mode
[ 1.989424] PM: Resume from disk failed.
[ 1.989437] registered taskstats version 1
[ 1.989726] Magic number: 6:479:745
[ 1.989838] rtc_cmos 00:03: setting system clock to 2010-12-26 17:42:50 UTC (1293385370)
[ 1.989842] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.989844] EDD information not available.
[ 2.006363] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.204746] isapnp: No Plug & Play device found
[ 2.204784] Freeing unused kernel memory: 688k freed
[ 2.205365] Write protecting the kernel text: 4932k
[ 2.205402] Write protecting the kernel read-only data: 1980k
[ 2.223815] udev[75]: starting version 163
[ 2.303448] sata_sil 0000:00:11.0: version 2.4
[ 2.323713] scsi0 : sata_sil
[ 2.344113] Floppy drive(s): fd0 is 1.44M
[ 2.351372] sky2: driver version 1.28
[ 2.351431] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.351447] sky2 0000:02:00.0: setting latency timer to 64
[ 2.351495] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
[ 2.353392] scsi1 : sata_sil
[ 2.353585] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 23
[ 2.353590] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 23
[ 2.354944] skge 0000:03:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 9
[ 2.355001] skge: 1.13 addr 0xfdbf8000 irq 9 chip Yukon-Lite rev 9
[ 2.355615] skge 0000:03:0a.0: eth1: addr 00:01:29:d2:f8:d5
[ 2.364662] scsi2 : sata_sil
[ 2.369479] sky2 0000:02:00.0: eth0: addr 00:01:29:d2:f8:71
[ 2.371149] scsi3 : sata_sil
[ 2.371359] ata3: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 22
[ 2.371364] ata4: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 22
[ 2.371489] sata_sil 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.371535] sata_sil 0000:03:08.0: Applying R_ERR on DMA activate FIS errata fix
[ 2.373154] scsi4 : pata_atiixp
[ 2.373320] FDC 0 is a post-1991 82077
[ 2.373327] scsi5 : sata_sil
[ 2.373496] scsi6 : pata_atiixp
[ 2.374441] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.374444] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.374718] scsi7 : sata_sil
[ 2.376774] scsi8 : sata_sil
[ 2.376895] scsi9 : sata_sil
[ 2.376940] ata7: SATA max UDMA/100 mmio m1024@0xfdbff000 tf 0xfdbff080 irq 23
[ 2.376945] ata8: SATA max UDMA/100 mmio m1024@0xfdbff000 tf 0xfdbff0c0 irq 23
[ 2.376950] ata9: SATA max UDMA/100 mmio m1024@0xfdbff000 tf 0xfdbff280 irq 23
[ 2.376954] ata10: SATA max UDMA/100 mmio m1024@0xfdbff000 tf 0xfdbff2c0 irq 23
[ 2.556613] ata6.00: ATAPI: Optiarc DVD RW AD-5200A, 1.01, max UDMA/66
[ 2.556643] ata6.01: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[ 2.572558] ata6.00: configured for UDMA/66
[ 2.588542] ata6.01: configured for UDMA/33
[ 2.672053] ata1: SATA link down (SStatus 0 SControl 310)
[ 2.692059] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.696040] ata7: SATA link down (SStatus 0 SControl 310)
[ 2.700439] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
[ 2.700443] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.716468] ata3.00: configured for UDMA/100
[ 2.992039] ata2: SATA link down (SStatus 0 SControl 310)
[ 2.992252] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
[ 2.992442] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.992570] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.992619] sd 2:0:0:0: [sda] Write Protect is off
[ 2.992622] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.992641] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.993360] sda: sda1 sda2 < sda5 sda6 >
[ 3.036031] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.316063] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.324543] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 3.324548] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.340534] ata4.00: configured for UDMA/100
[ 3.340687] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 3.340873] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 3.341088] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.341137] sd 3:0:0:0: [sdb] Write Protect is off
[ 3.341140] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.341160] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.341309] sdb:
[ 3.343213] scsi 6:0:0:0: CD-ROM Optiarc DVD RW AD-5200A 1.01 PQ: 0 ANSI: 5
[ 3.348161] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.348165] Uniform CD-ROM driver Revision: 3.20
[ 3.348284] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 3.348353] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 3.348990] scsi 6:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[ 3.352829] sr1: scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
[ 3.352912] sr 6:0:1:0: Attached scsi CD-ROM sr1
[ 3.352962] sr 6:0:1:0: Attached scsi generic sg3 type 5
[ 3.363368] sdb1
[ 3.363601] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 3.449264] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.676051] ata8: SATA link down (SStatus 0 SControl 310)
[ 3.997050] ata9: SATA link down (SStatus 0 SControl 310)
[ 4.316054] ata10: SATA link down (SStatus 0 SControl 310)
[ 12.838632] udev[379]: starting version 163
[ 12.846130] Adding 2928636k swap on /dev/sda5. Priority:-1 extents:1 across:2928636k
[ 13.056952] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0
[ 13.059294] Linux agpgart interface v0.103
[ 13.062783] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.063017] alloc irq_desc for 20 on node -1
[ 13.063020] alloc kstat_irqs on node -1
[ 13.063028] firewire_ohci 0000:03:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 13.150625] lp: driver loaded but no devices found
[ 13.160078] firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[ 13.269030] nvidia: module license 'NVIDIA' taints kernel.
[ 13.269037] Disabling lock debugging due to kernel taint
[ 13.274186] type=1400 audit(1293385381.782:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=647 comm="apparmor_parser"
[ 13.274468] type=1400 audit(1293385381.782:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=647 comm="apparmor_parser"
[ 13.274630] type=1400 audit(1293385381.782:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=647 comm="apparmor_parser"
[ 13.289346] psmouse serio1: ID: 10 00 64
[ 13.307670] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.370038] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.415679] hda_codec: ALC882: BIOS auto-probing.
[ 13.649136] firewire_core: created device fw0: GUID 000129200003c736, S400
[ 13.914958] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 13.964853] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.539408] alloc irq_desc for 18 on node -1
[ 14.539413] alloc kstat_irqs on node -1
[ 14.539421] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.539431] nvidia 0000:01:00.0: setting latency timer to 64
[ 14.539437] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 14.539726] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 16.255075] sky2 0000:02:00.0: eth0: enabling interface
[ 16.255283] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.266975] skge 0000:03:0a.0: eth1: enabling interface
[ 16.270563] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 16.276353] ppdev: user-space parallel port driver
[ 16.286107] type=1400 audit(1293385384.790:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=971 comm="apparmor_parser"
[ 16.295184] type=1400 audit(1293385384.798:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=972 comm="apparmor_parser"
[ 16.295462] type=1400 audit(1293385384.798:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=972 comm="apparmor_parser"
[ 16.295624] type=1400 audit(1293385384.798:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=972 comm="apparmor_parser"
[ 16.311361] type=1400 audit(1293385384.814:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=983 comm="apparmor_parser"
[ 16.311736] type=1400 audit(1293385384.814:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=983 comm="apparmor_parser"
[ 16.312961] type=1400 audit(1293385384.818:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=974 comm="apparmor_parser"
[ 16.639236] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 16.639241] vboxdrv: Successfully done.
[ 16.639243] vboxdrv: Found 2 processor cores.
[ 16.640283] vboxdrv: fAsync=1 offMin=0xa8afd offMax=0xa8afd
[ 16.641704] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 16.641709] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).


/home/myuserid :

Κώδικας: Επιλογή όλων

/etc/gdm/Xsession: Beginning session setup...
Setting IM through im-switch for locale=el_GR.
Start IM through /etc/X11/xinit/xinput.d/all_ALL linked to /etc/X11/xinit/xinput.d/default.
GNOME_KEYRING_CONTROL=/tmp/keyring-j6ZhIg
GNOME_KEYRING_CONTROL=/tmp/keyring-j6ZhIg
SSH_AUTH_SOCK=/tmp/keyring-j6ZhIg/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-j6ZhIg
SSH_AUTH_SOCK=/tmp/keyring-j6ZhIg/ssh
gnome-session[1445]: WARNING: Could not launch application 'docky.desktop': Unable to start application: Αποτυχία εκτέλεσης θυγατρικής διεργασίας "docky" (Δεν υπάρχει τέτοιο αρχείο ή κατάλογος)

(polkit-gnome-authentication-agent-1:1543): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'

(polkit-gnome-authentication-agent-1:1543): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
** Message: applet now removed from the notification area
** (nm-applet:1541): DEBUG: old state indicates that this was not a disconnect 0
Initializing nautilus-gdu extension
Unable to find a synaptics device.
I/O warning : failed to load external entity "/home/nikos/.compiz/session/1065e7d6d46a1861dd129340207468652400000014450028"

(nautilus:1547): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed
** Message: applet now embedded in the notification area
Nautilus-Share-Message: Called "net usershare info" but it failed: Το 'net usershare' επέστρεψε σφάλμα 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error Δεν υπάρχει τέτοιο αρχείο ή κατάλογος
Please ask your system administrator to enable user sharing.

compiz (cube) - Warn: Failed to load slide: /usr/share/gdm/themes/Human/ubuntu.png
compiz (cube) - Warn: Failed to load slide: /usr/share/gdm/themes/Human/ubuntu.png

** (gnome-settings-daemon:1495): WARNING **: Got less number of items in credentials hash table than expected!

(rhythmbox:1663): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
** Message: pygobject_register_sinkfunc is deprecated (GstObject)
** (update-notifier:1790): DEBUG: aptdaemon on bus: 0
** (update-notifier:1790): DEBUG: Skipping reboot required
[ConvConfHandler] isPreferred contentType: application/x-bittorrent
[ConvConfHandler] isPreferred contentType: application/x-bittorrent
[ConvConfHandler] isPreferred contentType: application/x-bittorrent

(nautilus:1547): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed
Stream with high frequencies VQ coding
VLC media player 1.1.4 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
Blocked: call to setlocale(6, "")
Blocked: call to sigaction(17, 0xb66ff0d4, 0xb66ff048)
Warning: call to signal(13, 0x1)
Warning: call to signal(13, 0x1)
Warning: call to srand(1292942551)
Warning: call to rand()
m_el[mi_level] == NULL
arrrrrrrrrrrrrg Up cannot escape itself
Blocked: call to setlocale(6, "")

(process:2022): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Warning: call to signal(13, 0x1)
Warning: call to signal(13, 0x1)
Blocked: call to setlocale(6, "")
m_el[mi_level] == NULL
arrrrrrrrrrrrrg Up cannot escape itself
[0x9559f74] dts decoder: DTS channels:6 samplerate:48000 bitrate:1536000
Stream with high frequencies VQ coding

(nautilus:1547): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed

(nautilus:1547): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed

(nautilus:1547): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed

(nautilus:1547): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed

(nautilus:1547): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed

(nautilus:1547): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed

[nikos_sib]

Όσον αφορά τις θερμοκρασίες ο επεξεργαστής δουλεύοντας στο 35%-45% -με deluge,firefox,rhythmox, "φορτωμένο" compiz και ανοιχτή παρακολούθηση συστήματος- είναι περίπου στους 48-52c, αλλά και όπως το θυμάμαι από όταν είχα winxp και τότε τόσο έδειχνε. (τη θερμοκρασία με το sensors στο τερματικό το είδα)

[Epirotes]

Οπότε δεν είναι πρόβλημα υπερθέρμανσης . Ελπίζω μόνο κάποιος έμπειρος να βγάλει άκρη με τα αποτελέσματα των εντολών.