Εγκατέστησα το Ubuntu 8.04 και δεν ξεκινάει

[erevnitis]

Τελικά αποφάσισα μετά από καιρό σκέψης και έρευνας να εγκαταλείψω τα WINDOWS XP από το λάπτοπ μου στο σπίτι και να βάλω ως μόνο λειτουργικό το UBUNTU 8.04. Ο λόγος ήταν ότι στις δοκιμές του live-cd το πρόσφατο UBUNTU 8.10 με έβγαζε σε μαύρη οθόνη, ενώ το 8.04 λειτουργούσε κανονικά ως live-cd.
τι έγινε λοιπόν; Εγκατέστησα αποκλειστικά το ubuntu 8.04 αφου έκανα σύμφωνα με οδηγίες σχετικές partition στον ένα σκληρό δίσκο που έχω: α) 10 GB για το λειτουργικό σύστημα στο root, b) 1 GB εικονική μνήμη και c) τα υπόλοιπα 49 GB για το home.
Αρχικά χάρηκα πολύ διότι η πρώτη επανεκίννηση που έκανα αφού τελείωσε η εγκατάσταση, έτρεξε πρώτη φορά ως μόνο λειτουργικό το ubuntu linux χωρίς κανένα πρόβλημα.
Αλλά όταν αργότερα το ξανάνοιξα για να κάνω κάποιες ρυθμίσεις, εγκαταστάσεις ενημερώσεων κλπ, αρνούνταν να ανοίξει, αν και εμφάνιζε αρχικά το GRUB και αμεσως μετά άρχισε να φορτώνει το UBUNTU, τελικά με άφηνε με μια ολόμαυρη οθόνη όπου ούτε ο κέρσορας δεν φαίνονταν!
Στο περιοδικό LINUX FORMAT για το UBUNTU-ΕΙΔΙΚΗ ΕΚΔΟΣΗ έλεγε πως σε περίπτωση που δεν ξεκινάει μετά την εγκατάσταση να πατήσεις μόλις εμφανιστεί το GRUB δύο φορές το Ε και μετά να γράψεις noapic nolapic xfocevesa, αλλά 3-4 φορές που έκανα επανεκίννηση (μετά από βίαιο κλείσιμο) δεν προλάβαινα να κάνω τίποτα όταν εμφανίζονταν το GRUB, και με το πάτημα του Ε δεν κατάφερνα κάτι!
Τελικά με το 5ο ξανάνοιγμα αυτη τη φορά κατάφερε να φορτώσει το UBUNTU αλλά φοβάμαι ότι την επόμενη φορά μπορεί πάλι να χρειαστεί 5 επανεκιννήσεις (αν ανοίξει καθόλου) για να..τρέξει, και με απογοητεύει!
Ξέρετε παιδιά τι μπορεί να φταίει; Η κάρτα γραφικών, ή τίποτε άλλο; Γιατί όμορφο είναι το UBUNTU, αλλά αν δεν μπορεί να φορτώνει, δεν ωφελεί καθόλου!
Σας ευχαριστώ!

[linuxman]

Για σου και μπράβο για τέτοια απόφαση
Για δώσε μας αποτέλεσμα από την εντολή τερματικού , Εφαρμογές/Βοηθήματα/Τερματικό

Κώδικας: Επιλογή όλων

lspci -nn

Και το

Κώδικας: Επιλογή όλων

dmesg

, το δεύτερο είναι πολύ μεγάλο , για να μην γίνει το πόστ ένα κατεβατό αποτέλεσμα θα το βάλεις (και το πρώτο και το δεύτερο ) μέσα στα

Κώδικας: Επιλογή όλων

[code]εδώ[/code]

[erevnitis]

για το πρώτο έβγαλε:

Κώδικας: Επιλογή όλων


00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 02)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 02)
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 02)
01:03.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972]
01:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 80)
01:0c.0 Ethernet controller [0200]: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller [100b:0020]

Για το δεύτερο:

Κώδικας: Επιλογή όλων


[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128976
[ 0.000000] HighMem 128976 -> 128976
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128976
[ 0.000000] On node 0 totalpages: 128976
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 123905 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F5540 checksum 0
[ 0.000000] ACPI: RSDP 000F5540, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 1F7D0000, 0030 (r1 A M I OEMRSDT 6000318 MSFT 97)
[ 0.000000] ACPI: FACP 1F7D0200, 0081 (r2 A M I OEMFACP 6000318 MSFT 97)
[ 0.000000] ACPI: DSDT 1F7D03F0, 384F (r1 UW UNIWILL 16 INTL 2002026)
[ 0.000000] ACPI: FACS 1F7DF000, 0040
[ 0.000000] ACPI: APIC 1F7D0390, 005C (r1 A M I OEMAPIC 6000318 MSFT 97)
[ 0.000000] ACPI: OEMB 1F7DF040, 0108 (r1 A M I AMI_OEM 6000318 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:e0780000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127969
[ 0.000000] Kernel command line: root=UUID=010e7171-95c0-4128-9be4-d59e38bb98fa ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2664.868 MHz processor.
[ 622.929601] Console: colour VGA+ 80x25
[ 622.929606] console [tty0] enabled
[ 622.930020] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 622.930382] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 622.941147] Memory: 499332k/515904k available (2178k kernel code, 15892k reserved, 1005k data, 368k init, 0k highmem)
[ 622.941156] virtual kernel memory layout:
[ 622.941157] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 622.941158] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 622.941159] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 622.941160] lowmem : 0xc0000000 - 0xdf7d0000 ( 503 MB)
[ 622.941162] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 622.941163] .data : 0xc0320918 - 0xc041bdc4 (1005 kB)
[ 622.941164] .text : 0xc0100000 - 0xc0320918 (2178 kB)
[ 622.941167] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 622.941205] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 623.021175] Calibrating delay using timer specific routine.. 5334.55 BogoMIPS (lpj=10669111)
[ 623.021200] Security Framework initialized
[ 623.021208] SELinux: Disabled at boot.
[ 623.021221] AppArmor: AppArmor initialized
[ 623.021225] Failure registering capabilities with primary security module.
[ 623.021235] Mount-cache hash table entries: 512
[ 623.021371] Initializing cgroup subsys ns
[ 623.021375] Initializing cgroup subsys cpuacct
[ 623.021387] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[ 623.021400] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 623.021403] CPU: L2 cache: 512K
[ 623.021406] CPU: Hyper-Threading is disabled
[ 623.021409] CPU: After all inits, caps: bfebfbff 00000000 00000000 00043080 00004400 00000000 00000000 00000000
[ 623.021422] Compat vDSO mapped to ffffe000.
[ 623.021435] Checking 'hlt' instruction... OK.
[ 623.037565] SMP alternatives: switching to UP code
[ 623.039208] Freeing SMP alternatives: 11k freed
[ 623.039352] Early unpacking initramfs... done
[ 623.358707] ACPI: Core revision 20070126
[ 623.358763] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 623.360624] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
[ 623.360660] Total of 1 processors activated (5334.55 BogoMIPS).
[ 623.360796] ENABLING IO-APIC IRQs
[ 623.360975] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 623.504923] Brought up 1 CPUs
[ 623.504947] CPU0 attaching sched-domain:
[ 623.504951] domain 0: span 01
[ 623.504953] groups: 01
[ 623.505166] net_namespace: 64 bytes
[ 623.505175] Booting paravirtualized kernel on bare hardware
[ 623.505751] Time: 5:57:04 Date: 01/26/09
[ 623.505783] NET: Registered protocol family 16
[ 623.506025] EISA bus registered
[ 623.506051] ACPI: bus type pci registered
[ 623.507681] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 623.507684] PCI: Using configuration type 1
[ 623.507691] Setting up standard PCI resources
[ 623.520671] ACPI: EC: Look up EC in DSDT
[ 623.522952] ACPI: Interpreter enabled
[ 623.522955] ACPI: (supports S0 S3 S4 S5)
[ 623.522971] ACPI: Using IOAPIC for interrupt routing
[ 623.529770] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 623.535294] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 623.535298] ACPI: EC: driver started in interrupt mode
[ 623.535347] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 623.535790] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 623.535791] * this clock source is slow. If you are sure your timer does not have
[ 623.535793] * this bug, please use "acpi_pm_good" to disable the workaround
[ 623.535838] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 623.535842] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[ 623.536273] PCI: Transparent bridge - 0000:00:1e.0
[ 623.536342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 623.536452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 623.559517] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 623.559662] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 623.559805] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 623.559947] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 623.560090] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 623.560235] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 623.560378] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 623.560523] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 623.560661] ACPI: Power Resource [URP1] (off)
[ 623.560694] ACPI: Power Resource [URP2] (off)
[ 623.560726] ACPI: Power Resource [FDDP] (off)
[ 623.560758] ACPI: Power Resource [LPTP] (off)
[ 623.560811] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B1, should be AC [20070126]
[ 623.560818] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 623.560862] pnp: PnP ACPI init
[ 623.560872] ACPI: bus type pnp registered
[ 623.565220] pnp: PnP ACPI: found 11 devices
[ 623.565224] ACPI: ACPI bus type pnp unregistered
[ 623.565229] PnPBIOS: Disabled by ACPI PNP
[ 623.565501] PCI: Using ACPI for IRQ routing
[ 623.565505] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 623.580841] NET: Registered protocol family 8
[ 623.580843] NET: Registered protocol family 20
[ 623.580927] AppArmor: AppArmor Filesystem Enabled
[ 623.584819] Time: tsc clocksource has been installed.
[ 623.592868] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 623.592871] system 00:05: ioport range 0x400-0x47f has been reserved
[ 623.592874] system 00:05: ioport range 0x500-0x53f has been reserved
[ 623.592878] system 00:05: iomem range 0xffe80000-0xffefffff has been reserved
[ 623.592881] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[ 623.592883] system 00:05: iomem range 0xfee00400-0xffbfffff has been reserved
[ 623.592890] system 00:06: ioport range 0x1100-0x113f has been reserved
[ 623.592892] system 00:06: ioport range 0x1254-0x1254 has been reserved
[ 623.592895] system 00:06: ioport range 0x12d4-0x12d4 has been reserved
[ 623.592897] system 00:06: ioport range 0x1300-0x1375 has been reserved
[ 623.592900] system 00:06: ioport range 0x1377-0x137f has been reserved
[ 623.592903] system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved
[ 623.592906] system 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 623.592915] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 623.592918] system 00:0a: iomem range 0x0-0x0 could not be reserved
[ 623.592921] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 623.592924] system 00:0a: iomem range 0x100000-0x1f7fffff could not be reserved
[ 623.592926] system 00:0a: iomem range 0x0-0x0 could not be reserved
[ 623.623401] PCI: Bus 2, cardbus bridge: 0000:01:03.0
[ 623.623405] IO window: 0000c000-0000c0ff
[ 623.623409] IO window: 0000c400-0000c4ff
[ 623.623413] PREFETCH window: 24000000-27ffffff
[ 623.623418] MEM window: 28000000-2bffffff
[ 623.623422] PCI: Bridge: 0000:00:1e.0
[ 623.623425] IO window: c000-cfff
[ 623.623430] MEM window: ffc00000-ffcfffff
[ 623.623434] PREFETCH window: disabled.
[ 623.623448] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 623.623472] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 623.623479] PCI: Setting latency timer of device 0000:01:03.0 to 64
[ 623.623492] NET: Registered protocol family 2
[ 623.660864] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 623.661129] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 623.661220] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 623.661310] TCP: Hash tables configured (established 16384 bind 16384)
[ 623.661313] TCP reno registered
[ 623.672916] checking if image is initramfs... it is
[ 624.124473] Switched to high resolution mode on CPU 0
[ 624.296401] Freeing initrd memory: 7318k freed
[ 624.297082] audit: initializing netlink socket (disabled)
[ 624.297103] audit(1232949424.252:1): initialized
[ 624.299428] VFS: Disk quotas dquot_6.5.1
[ 624.299519] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 624.299680] io scheduler noop registered
[ 624.299682] io scheduler anticipatory registered
[ 624.299684] io scheduler deadline registered
[ 624.299697] io scheduler cfq registered (default)
[ 624.299712] Boot video device is 0000:00:02.0
[ 624.300085] isapnp: Scanning for PnP cards...
[ 624.654029] isapnp: No Plug & Play device found
[ 624.687803] Real Time Clock Driver v1.12ac
[ 624.687918] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 624.688633] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 16
[ 624.688644] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 624.689381] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 624.689457] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 624.689573] PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 624.700190] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 624.702630] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 624.702636] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 624.702639] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 624.702642] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 624.702644] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 624.712073] mice: PS/2 mouse device common for all mice
[ 624.712211] EISA: Probing bus 0 at eisa.0
[ 624.712248] EISA: Detected 0 cards.
[ 624.712251] cpuidle: using governor ladder
[ 624.712253] cpuidle: using governor menu
[ 624.712357] NET: Registered protocol family 1
[ 624.712389] Using IPI No-Shortcut mode
[ 624.712424] registered taskstats version 1
[ 624.712540] Magic number: 9:891:972
[ 624.712670] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 624.712672] EDD information not available.
[ 624.713144] Freeing unused kernel memory: 368k freed
[ 624.713169] Write protecting the kernel read-only data: 801k
[ 624.728017] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 625.944613] fuse init (API version 7.9)
[ 625.966930] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 625.966948] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 625.968374] ACPI: Thermal Zone [THRM] (75 C)
[ 626.543063] usbcore: registered new interface driver usbfs
[ 626.543091] usbcore: registered new interface driver hub
[ 626.547593] usbcore: registered new device driver usb
[ 626.560026] USB Universal Host Controller Interface driver v3.0
[ 626.560103] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 626.560116] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 626.560120] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 626.560468] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 626.560499] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000df20
[ 626.560656] usb usb1: configuration #1 chosen from 1 choice
[ 626.560686] hub 1-0:1.0: USB hub found
[ 626.560693] hub 1-0:1.0: 2 ports detected
[ 626.619462] SCSI subsystem initialized
[ 626.662745] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[ 626.662760] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 626.662765] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 626.662791] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 626.662819] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000df40
[ 626.662951] usb usb2: configuration #1 chosen from 1 choice
[ 626.662977] hub 2-0:1.0: USB hub found
[ 626.662984] hub 2-0:1.0: 2 ports detected
[ 626.684786] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 626.684789] originally by Donald Becker <becker@scyld.com>
[ 626.684791] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 626.694613] libata version 3.00 loaded.
[ 626.766646] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 626.766662] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 626.766666] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 626.766696] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 626.766724] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000df80
[ 626.766863] usb usb3: configuration #1 chosen from 1 choice
[ 626.766889] hub 3-0:1.0: USB hub found
[ 626.766895] hub 3-0:1.0: 2 ports detected
[ 626.870700] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
[ 626.870717] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 626.870722] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 626.870757] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 626.874684] ehci_hcd 0000:00:1d.7: debug port 1
[ 626.874691] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 626.874702] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffe7fc00
[ 626.890425] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 626.890574] usb usb4: configuration #1 chosen from 1 choice
[ 626.890603] hub 4-0:1.0: USB hub found
[ 626.890611] hub 4-0:1.0: 6 ports detected
[ 626.994584] ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 626.996571] natsemi eth0: NatSemi DP8381[56] at 0xffcfe000 (0000:01:0c.0), 00:a0:cc:de:52:25, IRQ 16, port TP.
[ 626.996671] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 627.049432] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ffcff800-ffcfffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 627.061566] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 627.061576] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 627.061637] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 627.061651] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 627.066625] ata_piix 0000:00:1f.1: version 2.12
[ 627.066647] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 627.066702] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 627.068424] scsi0 : ata_piix
[ 627.069636] scsi1 : ata_piix
[ 627.070982] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 627.070985] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 627.234807] ata1.00: ATA-6: FUJITSU MHT2060AT, 009A, max UDMA/100
[ 627.234812] ata1.00: 117210240 sectors, multi 16: LBA
[ 627.250819] ata1.00: configured for UDMA/100
[ 627.634245] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R6112, 1030, max UDMA/33
[ 627.822043] ata2.00: configured for UDMA/33
[ 627.822183] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 009A PQ: 0 ANSI: 5
[ 627.828112] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R6112 1030 PQ: 0 ANSI: 5
[ 627.841918] Driver 'sd' needs updating - please use bus_type methods
[ 627.842022] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 627.842038] sd 0:0:0:0: [sda] Write Protect is off
[ 627.842041] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 627.842063] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 627.842123] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 627.842135] sd 0:0:0:0: [sda] Write Protect is off
[ 627.842138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 627.842159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 627.842163] sda:<6>usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 627.846898] Driver 'sr' needs updating - please use bus_type methods
[ 627.923484] sda1 sda2 sda3
[ 627.947468] sd 0:0:0:0: [sda] Attached SCSI disk
[ 627.953399] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 627.953423] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 627.963958] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 627.963964] Uniform CD-ROM driver Revision: 3.20
[ 627.964030] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 628.026775] usb 2-1: configuration #1 chosen from 1 choice
[ 628.285385] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 628.329481] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d49755149e2]
[ 628.460400] usb 3-2: configuration #1 chosen from 1 choice
[ 628.463435] usbcore: registered new interface driver hiddev
[ 628.476548] input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
[ 628.477348] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:1d.1-1
[ 628.477374] usbcore: registered new interface driver usbhid
[ 628.477378] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 628.478617] usbcore: registered new interface driver libusual
[ 628.489328] Initializing USB Mass Storage driver...
[ 628.495162] scsi2 : SCSI emulation for USB Mass Storage devices
[ 628.495871] usbcore: registered new interface driver usb-storage
[ 628.495877] USB Mass Storage support registered.
[ 628.495979] usb-storage: device found at 2
[ 628.495981] usb-storage: waiting for device to settle before scanning
[ 628.594738] Attempting manual resume
[ 628.594743] swsusp: Resume From Partition 8:2
[ 628.594745] PM: Checking swsusp image.
[ 628.594991] PM: Resume from disk failed.
[ 628.624072] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 628.624078] EXT3-fs: write access will be enabled during recovery.
[ 628.712321] kjournald starting. Commit interval 5 seconds
[ 628.712338] EXT3-fs: recovery complete.
[ 628.712708] EXT3-fs: mounted filesystem with ordered data mode.
[ 633.490914] usb-storage: device scan complete
[ 633.493898] scsi 2:0:0:0: Direct-Access Generic USB Storage-MSC 320A PQ: 0 ANSI: 0 CCS
[ 633.498912] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 633.498950] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 638.889674] Linux agpgart interface v0.102
[ 639.049642] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
[ 639.101642] agpgart: Detected an Intel 830M Chipset.
[ 639.101757] agpgart: Detected 8060K stolen memory.
[ 639.115435] agpgart: AGP aperture is 128M @ 0xf0000000
[ 639.162277] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 639.202393] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 639.242561] input: Power Button (FF) as /devices/virtual/input/input3
[ 639.257372] ACPI: Power Button (FF) [PWRF]
[ 639.257527] input: Lid Switch as /devices/virtual/input/input4
[ 639.257598] ACPI: Lid Switch [LID]
[ 639.257668] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 639.277352] ACPI: Sleep Button (CM) [SLPB]
[ 639.277488] input: Power Button (CM) as /devices/virtual/input/input6
[ 639.293385] ACPI: Power Button (CM) [PWRB]
[ 639.740107] ACPI: AC Adapter [AC0] (on-line)
[ 639.801059] ACPI: Battery Slot [BAT0] (battery absent)
[ 640.309046] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:10/LNXVIDEO:00/input/input7
[ 640.324593] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 640.415525] Yenta: CardBus bridge found at 0000:01:03.0 [1584:3000]
[ 640.415547] Yenta O2: res at 0x94/0xD4: 00/ea
[ 640.415549] Yenta O2: enabling read prefetch/write burst
[ 640.541371] Yenta: ISA IRQ mask 0x0c38, PCI irq 16
[ 640.541376] Socket status: 30000007
[ 640.541379] Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
[ 640.541387] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[ 640.541391] cs: IO port probe 0xc000-0xcfff: clean.
[ 640.541595] pcmcia: parent PCI bridge Memory window: 0xffc00000 - 0xffcfffff
[ 640.739739] iTCO_vendor_support: vendor-support=0
[ 640.761792] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 640.761950] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
[ 640.761999] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 640.881183] intel_rng: FWH not detected
[ 641.272063] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 642.155576] PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
[ 642.155585] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 16
[ 642.155616] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 642.250006] Synaptics Touchpad, model: 1, fw: 4.1, id: 0x848a1, caps: 0x0/0x0
[ 642.290052] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 642.520141] parport_pc 00:09: reported by Plug and Play ACPI
[ 642.520168] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 642.982645] intel8x0_measure_ac97_clock: measured 55306 usecs
[ 642.982649] intel8x0: clocking to 48000
[ 643.802645] cs: IO port probe 0x100-0x3af: clean.
[ 643.804543] cs: IO port probe 0x3e0-0x4ff: clean.
[ 643.804999] cs: IO port probe 0x820-0x8ff: clean.
[ 643.805673] cs: IO port probe 0xc00-0xcf7: clean.
[ 643.806579] cs: IO port probe 0xa00-0xaff: clean.
[ 644.230577] lp0: using parport0 (interrupt-driven).
[ 644.330482] Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k
[ 644.876380] EXT3 FS on sda1, internal journal
[ 646.438308] kjournald starting. Commit interval 5 seconds
[ 646.438641] EXT3 FS on sda3, internal journal
[ 646.438646] EXT3-fs: mounted filesystem with ordered data mode.
[ 646.860741] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 649.213066] No dock devices found.
[ 650.531640] apm: BIOS not found.
[ 650.690396] ppdev: user-space parallel port driver
[ 650.992090] audit(1232949451.877:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4941 profile="/usr/sbin/cupsd" namespace="default"
[ 654.428969] eth0: DSPCFG accepted after 0 usec.
[ 654.428982] eth0: link up.
[ 654.428990] eth0: Setting full-duplex based on negotiated link capability.
[ 654.579893] Bluetooth: Core ver 2.11
[ 654.580655] NET: Registered protocol family 31
[ 654.580660] Bluetooth: HCI device and connection manager initialized
[ 654.580665] Bluetooth: HCI socket layer initialized
[ 654.602159] Bluetooth: L2CAP ver 2.9
[ 654.602165] Bluetooth: L2CAP socket layer initialized
[ 654.643949] Bluetooth: RFCOMM socket layer initialized
[ 654.644213] Bluetooth: RFCOMM TTY layer initialized
[ 654.644217] Bluetooth: RFCOMM ver 1.8
[ 656.660640] NET: Registered protocol family 17
[ 657.724132] [drm] Initialized drm 1.1.0 20060810
[ 657.727902] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 657.727913] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 657.728019] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 658.848796] NET: Registered protocol family 10
[ 658.849348] lo: Disabled Privacy Extensions
[ 669.635105] eth0: no IPv6 routers present
[ 698.000141] UDF-fs: No VRS found
[ 698.083066] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 698.213471] ISO 9660 Extensions: RRIP_1991A

Ξαναέκανε το ίδιο σήμερα 2 φορές παρότι κατέβασα 341 ενημερώσεις που έδειχνε ότι χρειάζονταν. Τελικά το ξεκίνησα με το ubuntu dvd επιλέγοντας Εκκίνηση από τον σκληρό δίσκο.
Ευχαριστώ για το καλωσόρισμα και την βοήθειά σας!

[linuxman]

Κάρτα γραφικών είναι

Κώδικας: Επιλογή όλων

00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 03)

οπότε λίγο δύσκολο να γίνει με αυτή , ας είναι και 64 shared .
Για δώσε και αποτέλεσμα τον εντολών
1.

Κώδικας: Επιλογή όλων

mount

2.

Κώδικας: Επιλογή όλων

cat /etc/fstab

[erevnitis]

Για το πρώτο:

Κώδικας: Επιλογή όλων

/dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
/sys on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
devshm on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
lrm on /lib/modules/2.6.24-23-generic/volatile type tmpfs (rw)
/dev/sda3 on /home type ext3 (rw,relatime)
securityfs on /sys/kernel/security type securityfs (rw)
gvfs-fuse-daemon on /home/erevnitis/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=erevnitis)
/dev/scd0 on /media/cdrom0 type iso9660 (ro,nosuid,nodev,utf8,user=erevnitis)

Για το δεύτερο:

Κώδικας: Επιλογή όλων

bash: fstab: command not found
erevnitis@erevnitis-laptop:~$ /dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ proc on /proc type proc (rw,noexec,nosuid,nodev)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ /sys on /sys type sysfs (rw,noexec,nosuid,nodev)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ udev on /dev type tmpfs (rw,mode=0755)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ devshm on /dev/shm type tmpfs (rw)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ devpts on /dev/pts type devpts (rw,gid=5,mode=620)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ lrm on /lib/modules/2.6.24-23-generic/volatile type tmpfs (rw)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ /dev/sda3 on /home type ext3 (rw,relatime)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ securityfs on /sys/kernel/security type securityfs (rw)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ gvfs-fuse-daemon on /home/erevnitis/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=erevnitis)
bash: syntax error near unexpected token `('
erevnitis@erevnitis-laptop:~$ /dev/scd0 on /media/cdrom0 type iso9660 (ro,nosuid,nodev,utf8,user=erevnitis)
bash: syntax error near unexpected token `('

Η κάρτα γραφικών λες ότι φαίνεται να χτυπάει. Τελικά το ανοίγω προσωρινά με το dvd επιλέγοντας να τρέξει από το σκληρό δίσκο και το κάνει. Ενώ μόνο του -χωρίς το ντιβιντί- όχι. Σε ευχαριστώ που ασχολείσαι με το πρόβλημά μου.

[dimisKJ]

O linuxman (μαλλον) ηθελε να πει να δωσεις

Κώδικας: Επιλογή όλων

gedit /etc/fstab

κανε copy τα περιεχομενα του αρχειου που θα ανοιξει και μετα paste μεσα σε

Κώδικας: Επιλογή όλων

[code][/code]

[linuxman]

Ναι αυτό ήθελα να δώσω .

[erevnitis]

Να τι βγάζει:

Κώδικας: Επιλογή όλων

# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1
UUID=010e7171-95c0-4128-9be4-d59e38bb98fa / ext3 relatime,errors=remount-ro 0 1
# /dev/sda3
UUID=ea5ac50e-414d-4785-8da8-caf547cc0aab /home ext3 relatime 0 2
# /dev/sda2
UUID=4fc9fd33-8166-4b62-b4b6-dd05111a7321 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0

[linuxman]

Μπες στο bios βρες την ρύθμιση Reset Default η κάτι ανάλογο στο τέλος είναι συνήθως και δοκίμασε ξανά .
Από αυτά που είδα δεν πρέπει να έχεις πρόβλημα , εγκατάσταση είναι οκ .

[erevnitis]

με τα windows xp έμπαινα στο bios πατώντας del στην αρχή. Τώρα δεν έπιασε!
έχεις κάποια ιδέα πως μπαίνω στο bios με ubuntu;
Επίσης μήπως χρειάζεται κάποια προσθήκη ρυθμίσεων στο menu.lst?

Κώδικας: Επιλογή όλων

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=010e7171-95c0-4128-9be4-d59e38bb98fa ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.04.2, kernel 2.6.24-23-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-23-generic root=UUID=010e7171-95c0-4128-9be4-d59e38bb98fa ro quiet splash
initrd /boot/initrd.img-2.6.24-23-generic
quiet

title Ubuntu 8.04.2, kernel 2.6.24-23-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-23-generic root=UUID=010e7171-95c0-4128-9be4-d59e38bb98fa ro single
initrd /boot/initrd.img-2.6.24-23-generic

title Ubuntu 8.04.2, kernel 2.6.24-16-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=010e7171-95c0-4128-9be4-d59e38bb98fa ro quiet splash
initrd /boot/initrd.img-2.6.24-16-generic
quiet

title Ubuntu 8.04.2, kernel 2.6.24-16-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=010e7171-95c0-4128-9be4-d59e38bb98fa ro single
initrd /boot/initrd.img-2.6.24-16-generic

title Ubuntu 8.04.2, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST