lucid beta Δεν τερματίζει.

[emmsarris]

Για να δώσω άλλο ένα στοιχείο, το fedora 13 beta που έχει την ίδια έκδοση πυρήνα (2.6.32) τερματίζει κανονικά. Άρα το bug έχει να κάνει με το ubuntu...

[vagrale13]

α) Δοκιμασε ετσι

Κώδικας: Επιλογή όλων

shutdown -h -P now

β) κανε logout και δοκιμασε μετα να κλεισεις τον υπολογιστη, και δες αν κλεινει.

γ) επανεκκινηση μπορεις να κανεις, ή εχεις και εκει προβλημα?

δ) Κλεισε τον υπολογιστη με τον τροπο που τον κλεινεις, μετα ανοιξε τον,
και μολις θα μπεις εκτελεσε τις εντολες

Κώδικας: Επιλογή όλων

lspci -vv > /tmp/lspci-vv.log
lspci -vvn > /tmp/lspci-vvn.log
dmesg > /tmp/dmesg.log
sudo dmidecode > /tmp/dmidecode.log

και ποσταρε τα περιεχομενα των αρχειων

Κώδικας: Επιλογή όλων

lspci-vv.log
lspci-vvn.log
dmesg.log
dmidecode.log

θα βρισκοντε στον φακελο /tmp

[emmsarris]

α) Δοκιμασε ετσι

Κώδικας: Επιλογή όλων

shutdown -h -P now

Το ίδιο...

β) κανε logout και δοκιμασε μετα να κλεισεις τον υπολογιστη, και δες αν κλεινει.

Επίσης

γ) επανεκκινηση μπορεις να κανεις, ή εχεις και εκει προβλημα?

Μπορώ κανονικά

δ) Κλεισε τον υπολογιστη με τον τροπο που τον κλεινεις, μετα ανοιξε τον,
και μολις θα μπεις εκτελεσε τις εντολες

Κώδικας: Επιλογή όλων

lspci -vv > /tmp/lspci-vv.log
lspci -vvn > /tmp/lspci-vvn.log
dmesg > /tmp/dmesg.log
sudo dmidecode > /tmp/dmidecode.log

και ποσταρε τα περιεχομενα των αρχειων

Κώδικας: Επιλογή όλων

lspci-vv.log
lspci-vvn.log
dmesg.log
dmidecode.log

θα βρισκοντε στον φακελο /tmp

Το lspci-vnvn και το dmesg είναι ήδη στο launchpad.Θα τα ξαναέστελνα, αλλά δεν έχω το laptop μαζί μου.Την Κυριακή που θα επιστρέψω Ηράκλειο θα τα ανεβάσω...

[the_eye]

Τι έκδοση bios έχεις ;

[emmsarris]

Πως το βλέπω..?

[emmsarris]

dmesg

Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfec0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfec0000 - 00000000bfed8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfed8000 - 00000000bfeda000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfeda000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfec0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009dc00 (usable)
[ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfec0000 (usable)
[ 0.000000] modified: 00000000bfec0000 - 00000000bfed8000 (ACPI data)
[ 0.000000] modified: 00000000bfed8000 - 00000000bfeda000 (ACPI NVS)
[ 0.000000] modified: 00000000bfeda000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 3787c000 - 37feffab
[ 0.000000] Allocated new RAMDISK: 008de000 - 01051fab
[ 0.000000] Move RAMDISK from 000000003787c000 - 0000000037feffaa to 008de000 - 01051faa
[ 0.000000] ACPI: RSDP 000f8030 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT bfecb3e6 00054 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP bfed78ca 000F4 (v03 AMD ANT 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT bfecb43a 0C490 (v01 ATI SB700 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS bfed9fc0 00040
[ 0.000000] ACPI: SLIC bfed7a32 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.000000] ACPI: SSDT bfed7ba8 00386 (v01 AMD POWERNOW 06040000 AMD 00000001)
[ 0.000000] ACPI: APIC bfed7f2e 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG bfed7f8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET bfed7fc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2182MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd1a0] BRK ==> [00008da000 - 00008dd1a0]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008de000 - 0001051fab] NEW RAMDISK ==> [00008de000 - 0001051fab]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f8170] f8170
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfec0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bfec0
[ 0.000000] On node 0 totalpages: 785997
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1053200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4366 pages used for memmap
[ 0.000000] HighMem zone: 554420 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u2097152
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779855
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=a853bdec-9a1f-4e7b-bb49-d2c82082e568 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 15721920 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfec0)
[ 0.000000] Memory: 3086352k/3144448k available (4673k kernel code, 56616k reserved, 2122k data, 656k init, 2235144k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 24 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.706 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.41 BogoMIPS (lpj=7978824)
[ 0.004042] Security Framework initialized
[ 0.004062] AppArmor: AppArmor initialized
[ 0.004077] Mount-cache hash table entries: 512
[ 0.004277] Initializing cgroup subsys ns
[ 0.004285] Initializing cgroup subsys cpuacct
[ 0.004293] Initializing cgroup subsys memory
[ 0.004306] Initializing cgroup subsys devices
[ 0.004311] Initializing cgroup subsys freezer
[ 0.004316] Initializing cgroup subsys net_cls
[ 0.004347] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004353] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004358] CPU: Physical Processor ID: 0
[ 0.004362] CPU: Processor Core ID: 0
[ 0.004369] mce: CPU supports 6 MCE banks
[ 0.004387] using C1E aware idle routine
[ 0.004397] Performance Events: AMD PMU driver.
[ 0.004409] ... version: 0
[ 0.004414] ... bit width: 48
[ 0.004418] ... generic registers: 4
[ 0.004422] ... value mask: 0000ffffffffffff
[ 0.004427] ... max period: 00007fffffffffff
[ 0.004432] ... fixed-purpose events: 0
[ 0.004436] ... event mask: 000000000000000f
[ 0.004443] Checking 'hlt' instruction... OK.
[ 0.024604] ACPI: Core revision 20090903
[ 0.052023] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.052032] ftrace: allocating 21771 entries in 43 pages
[ 0.056111] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.056453] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.097414] CPU0: AMD Athlon(tm) II Dual-Core M300 stepping 02
[ 0.100001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.184061] CPU1: AMD Athlon(tm) II Dual-Core M300 stepping 02
[ 0.184106] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.188014] Brought up 2 CPUs
[ 0.188017] Total of 2 processors activated (7979.30 BogoMIPS).
[ 0.188022] System has AMD C1E enabled
[ 0.188045] Switch to broadcast mode on CPU1
[ 0.188211] CPU0 attaching sched-domain:
[ 0.188214] domain 0: span 0-1 level MC
[ 0.188217] groups: 0 1
[ 0.188222] CPU1 attaching sched-domain:
[ 0.188224] domain 0: span 0-1 level MC
[ 0.188226] groups: 1 0
[ 0.188301] Switch to broadcast mode on CPU0
[ 0.188301] devtmpfs: initialized
[ 0.188301] regulator: core version 0.5
[ 0.188301] Time: 12:57:05 Date: 04/25/10
[ 0.188301] NET: Registered protocol family 16
[ 0.188301] EISA bus registered
[ 0.188301] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.188301] ACPI: bus type pci registered
[ 0.188301] Trying to unpack rootfs image as initramfs...
[ 0.188314] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
[ 0.188317] PCI: MCFG area at e0000000 reserved in E820
[ 0.188319] PCI: Using MMCONFIG for extended config space
[ 0.188321] PCI: Using configuration type 1 for base access
[ 0.192163] bio: create slab <bio-0> at 0
[ 0.193180] ACPI: EC: Look up EC in DSDT
[ 0.197968] ACPI: BIOS _OSI(Linux) query ignored
[ 0.198722] ACPI: OEMN bfed8c69 00173 (v01 AMD NAHP 00000001 MSFT 03000001)
[ 0.208077] ACPI: Interpreter enabled
[ 0.208086] ACPI: (supports S0 S3 S4 S5)
[ 0.208109] ACPI: Using IOAPIC for interrupt routing
[ 0.220959] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.221181] ACPI: No dock devices found.
[ 0.224485] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.224630] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.224633] pci 0000:00:02.0: PME# disabled
[ 0.224714] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.224717] pci 0000:00:04.0: PME# disabled
[ 0.224797] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.224800] pci 0000:00:06.0: PME# disabled
[ 0.224901] pci 0000:00:11.0: reg 10 io port: [0x8420-0x8427]
[ 0.224908] pci 0000:00:11.0: reg 14 io port: [0x8414-0x8417]
[ 0.224916] pci 0000:00:11.0: reg 18 io port: [0x8418-0x841f]
[ 0.224923] pci 0000:00:11.0: reg 1c io port: [0x8410-0x8413]
[ 0.224930] pci 0000:00:11.0: reg 20 io port: [0x8400-0x840f]
[ 0.224937] pci 0000:00:11.0: reg 24 32bit mmio: [0xf0408000-0xf04083ff]
[ 0.224991] pci 0000:00:12.0: reg 10 32bit mmio: [0xf0404000-0xf0404fff]
[ 0.225047] pci 0000:00:12.1: reg 10 32bit mmio: [0xf0405000-0xf0405fff]
[ 0.225120] pci 0000:00:12.2: reg 10 32bit mmio: [0xf0408400-0xf04084ff]
[ 0.225173] pci 0000:00:12.2: supports D1 D2
[ 0.225175] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.225180] pci 0000:00:12.2: PME# disabled
[ 0.225212] pci 0000:00:13.0: reg 10 32bit mmio: [0xf0406000-0xf0406fff]
[ 0.225268] pci 0000:00:13.1: reg 10 32bit mmio: [0xf0407000-0xf0407fff]
[ 0.225341] pci 0000:00:13.2: reg 10 32bit mmio: [0xf0408800-0xf04088ff]
[ 0.225393] pci 0000:00:13.2: supports D1 D2
[ 0.225396] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.225400] pci 0000:00:13.2: PME# disabled
[ 0.225526] pci 0000:00:14.2: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
[ 0.225570] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.225574] pci 0000:00:14.2: PME# disabled
[ 0.225804] pci 0000:02:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.225810] pci 0000:02:00.0: reg 14 io port: [0x9000-0x90ff]
[ 0.225815] pci 0000:02:00.0: reg 18 32bit mmio: [0xcfef0000-0xcfefffff]
[ 0.225828] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.225844] pci 0000:02:00.0: supports D1 D2
[ 0.225868] pci 0000:02:00.1: reg 10 32bit mmio: [0xcfeec000-0xcfeeffff]
[ 0.225899] pci 0000:02:00.1: supports D1 D2
[ 0.225985] pci 0000:00:02.0: bridge io port: [0x9000-0x9fff]
[ 0.225989] pci 0000:00:02.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff]
[ 0.225993] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.226046] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0200000-0xf020ffff]
[ 0.226107] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.226112] pci 0000:03:00.0: PME# disabled
[ 0.226204] pci 0000:00:04.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
[ 0.226246] pci 0000:09:00.0: reg 10 64bit mmio: [0xf0300000-0xf030ffff]
[ 0.226295] pci 0000:09:00.0: supports D1
[ 0.226298] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 0.226302] pci 0000:09:00.0: PME# disabled
[ 0.226396] pci 0000:00:06.0: bridge 32bit mmio: [0xf0300000-0xf03fffff]
[ 0.226455] pci 0000:00:14.4: transparent bridge
[ 0.226476] pci_bus 0000:00: on NUMA node 0
[ 0.226480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.226689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[ 0.226772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.226847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.226958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.231424] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.231618] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.231813] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.232030] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.232220] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.232416] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.232610] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.232806] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.232961] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.232966] vgaarb: loaded
[ 0.233068] SCSI subsystem initialized
[ 0.233152] libata version 3.00 loaded.
[ 0.233213] usbcore: registered new interface driver usbfs
[ 0.233228] usbcore: registered new interface driver hub
[ 0.233249] usbcore: registered new device driver usb
[ 0.233398] ACPI: WMI: Mapper loaded
[ 0.233400] PCI: Using ACPI for IRQ routing
[ 0.233579] NetLabel: Initializing
[ 0.233580] NetLabel: domain hash size = 128
[ 0.233582] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.233594] NetLabel: unlabeled traffic allowed by default
[ 0.233659] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.233665] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.235674] Switching to clocksource tsc
[ 0.235757] AppArmor: AppArmor Filesystem Enabled
[ 0.235757] pnp: PnP ACPI init
[ 0.235757] ACPI: bus type pnp registered
[ 0.239384] pnp: PnP ACPI: found 11 devices
[ 0.239387] ACPI: ACPI bus type pnp unregistered
[ 0.239391] PnPBIOS: Disabled by ACPI PNP
[ 0.239403] system 00:01: ioport range 0xf50-0xf51 has been reserved
[ 0.239407] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.239410] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.239418] system 00:06: ioport range 0x220-0x22f has been reserved
[ 0.239421] system 00:06: ioport range 0x40b-0x40b has been reserved
[ 0.239424] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.239426] system 00:06: ioport range 0x4d6-0x4d6 has been reserved
[ 0.239429] system 00:06: ioport range 0x530-0x537 has been reserved
[ 0.239432] system 00:06: ioport range 0xc00-0xc01 has been reserved
[ 0.239434] system 00:06: ioport range 0xc14-0xc14 has been reserved
[ 0.239437] system 00:06: ioport range 0xc50-0xc52 has been reserved
[ 0.239440] system 00:06: ioport range 0xc6c-0xc6c has been reserved
[ 0.239443] system 00:06: ioport range 0xc6f-0xc6f has been reserved
[ 0.239445] system 00:06: ioport range 0xcd0-0xcd1 has been reserved
[ 0.239448] system 00:06: ioport range 0xcd2-0xcd3 has been reserved
[ 0.239451] system 00:06: ioport range 0xcd4-0xcd5 has been reserved
[ 0.239454] system 00:06: ioport range 0xcd6-0xcd7 has been reserved
[ 0.239456] system 00:06: ioport range 0xcd8-0xcdf has been reserved
[ 0.239459] system 00:06: ioport range 0x8000-0x805f has been reserved
[ 0.239462] system 00:06: ioport range 0xf40-0xf47 has been reserved
[ 0.239465] system 00:06: ioport range 0x87f-0x87f has been reserved
[ 0.239468] system 00:06: iomem range 0xff800000-0xffefffff has been reserved
[ 0.239476] system 00:06: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.239482] system 00:07: iomem range 0xe0000-0xfffff could not be reserved
[ 0.239485] system 00:07: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.239488] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.274522] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.274525] pci 0000:00:02.0: IO window: 0x9000-0x9fff
[ 0.274529] pci 0000:00:02.0: MEM window: 0xcfe00000-0xcfefffff
[ 0.274533] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.274537] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 0.274539] pci 0000:00:04.0: IO window: disabled
[ 0.274542] pci 0000:00:04.0: MEM window: 0xf0200000-0xf02fffff
[ 0.274545] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.274549] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
[ 0.274551] pci 0000:00:06.0: IO window: disabled
[ 0.274554] pci 0000:00:06.0: MEM window: 0xf0300000-0xf03fffff
[ 0.274556] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.274560] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0a
[ 0.274562] pci 0000:00:14.4: IO window: disabled
[ 0.274601] pci 0000:00:14.4: MEM window: disabled
[ 0.274605] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.274618] alloc irq_desc for 18 on node -1
[ 0.274620] alloc kstat_irqs on node -1
[ 0.274625] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.274629] pci 0000:00:02.0: setting latency timer to 64
[ 0.274634] alloc irq_desc for 16 on node -1
[ 0.274635] alloc kstat_irqs on node -1
[ 0.274639] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.274642] pci 0000:00:04.0: setting latency timer to 64
[ 0.274647] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.274650] pci 0000:00:06.0: setting latency timer to 64
[ 0.274658] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.274661] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.274664] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
[ 0.274666] pci_bus 0000:02: resource 1 mem: [0xcfe00000-0xcfefffff]
[ 0.274669] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.274671] pci_bus 0000:03: resource 1 mem: [0xf0200000-0xf02fffff]
[ 0.274674] pci_bus 0000:09: resource 1 mem: [0xf0300000-0xf03fffff]
[ 0.274677] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.274679] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff]
[ 0.274714] NET: Registered protocol family 2
[ 0.274802] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.275092] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.275645] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.275914] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.275916] TCP reno registered
[ 0.276000] NET: Registered protocol family 1
[ 0.276127] pci 0000:02:00.0: Boot video device
[ 0.276342] cpufreq-nforce2: No nForce2 chipset.
[ 0.276367] Scanning for low memory corruption every 60 seconds
[ 0.276462] audit: initializing netlink socket (disabled)
[ 0.276472] type=2000 audit(1272200224.276:1): initialized
[ 0.285517] highmem bounce pool size: 64 pages
[ 0.285522] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.286891] VFS: Disk quotas dquot_6.5.2
[ 0.286945] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.287465] fuse init (API version 7.13)
[ 0.287542] msgmni has been set to 1664
[ 0.287726] alg: No test for stdrng (krng)
[ 0.287775] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.287778] io scheduler noop registered
[ 0.287780] io scheduler anticipatory registered
[ 0.287782] io scheduler deadline registered
[ 0.287823] io scheduler cfq registered (default)
[ 0.287943] alloc irq_desc for 25 on node -1
[ 0.287945] alloc kstat_irqs on node -1
[ 0.287953] pcieport 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.287959] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.288034] alloc irq_desc for 26 on node -1
[ 0.288035] alloc kstat_irqs on node -1
[ 0.288040] pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
[ 0.288045] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.288115] alloc irq_desc for 27 on node -1
[ 0.288117] alloc kstat_irqs on node -1
[ 0.288122] pcieport 0000:00:06.0: irq 27 for MSI/MSI-X
[ 0.288126] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.288184] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.288208] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.289576] ACPI: AC Adapter [ADP1] (on-line)
[ 0.289642] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.289646] ACPI: Power Button [PWRB]
[ 0.289683] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.290606] ACPI: Lid Switch [LID0]
[ 0.290681] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.290720] ACPI: Sleep Button [SLPB]
[ 0.290778] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.290780] ACPI: Power Button [PWRF]
[ 0.291030] ACPI: processor limited to max C-state 1
[ 0.291051] processor LNXCPU:00: registered as cooling_device0
[ 0.291082] processor LNXCPU:01: registered as cooling_device1
[ 0.305715] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.305725] ACPI: Thermal Zone [TZS0] (64 C)
[ 0.310681] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.310691] ACPI: Thermal Zone [TZS1] (59 C)
[ 0.312149] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.313281] brd: module loaded
[ 0.313668] loop: module loaded
[ 0.313745] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.314107] Fixed MDIO Bus: probed
[ 0.314136] PPP generic driver version 2.4.2
[ 0.314169] tun: Universal TUN/TAP device driver, 1.6
[ 0.314171] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.314235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.314290] alloc irq_desc for 17 on node -1
[ 0.314292] alloc kstat_irqs on node -1
[ 0.314298] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.314314] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.314345] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.314377] ehci_hcd 0000:00:12.2: debug port 1
[ 0.314400] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0408400
[ 0.314545] isapnp: Scanning for PnP cards...
[ 0.368734] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.368774] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.368850] usb usb1: configuration #1 chosen from 1 choice
[ 0.368875] hub 1-0:1.0: USB hub found
[ 0.368882] hub 1-0:1.0: 6 ports detected
[ 0.368970] alloc irq_desc for 19 on node -1
[ 0.368972] alloc kstat_irqs on node -1
[ 0.368976] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.368987] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.369012] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.369039] ehci_hcd 0000:00:13.2: debug port 1
[ 0.369058] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0408800
[ 0.384409] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.384545] usb usb2: configuration #1 chosen from 1 choice
[ 0.384573] hub 2-0:1.0: USB hub found
[ 0.384584] hub 2-0:1.0: 6 ports detected
[ 0.384684] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.384738] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.384759] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.384792] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.384824] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0404000
[ 0.390835] Freeing initrd memory: 7631k freed
[ 0.444440] usb usb3: configuration #1 chosen from 1 choice
[ 0.444468] hub 3-0:1.0: USB hub found
[ 0.444513] hub 3-0:1.0: 3 ports detected
[ 0.444569] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.444586] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.444622] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.444682] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0405000
[ 0.504446] usb usb4: configuration #1 chosen from 1 choice
[ 0.504473] hub 4-0:1.0: USB hub found
[ 0.504484] hub 4-0:1.0: 3 ports detected
[ 0.504542] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.504561] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.504592] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.504620] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0406000
[ 0.564444] usb usb5: configuration #1 chosen from 1 choice
[ 0.564474] hub 5-0:1.0: USB hub found
[ 0.564518] hub 5-0:1.0: 3 ports detected
[ 0.564571] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.564588] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.564621] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 0.564684] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf0407000
[ 0.624457] usb usb6: configuration #1 chosen from 1 choice
[ 0.624488] hub 6-0:1.0: USB hub found
[ 0.624532] hub 6-0:1.0: 3 ports detected
[ 0.624584] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.624658] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.636998] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.648465] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.648472] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.648475] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.648478] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.648481] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.648553] mice: PS/2 mouse device common for all mice
[ 0.648670] rtc_cmos 00:04: RTC can wake from S4
[ 0.648704] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.648730] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.648822] device-mapper: uevent: version 1.0.3
[ 0.648921] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.648975] device-mapper: multipath: version 1.1.0 loaded
[ 0.648977] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.649082] EISA: Probing bus 0 at eisa.0
[ 0.649116] Cannot allocate resource for EISA slot 8
[ 0.649118] EISA: Detected 0 cards.
[ 0.649172] cpuidle: using governor ladder
[ 0.649174] cpuidle: using governor menu
[ 0.649580] TCP cubic registered
[ 0.649711] NET: Registered protocol family 10
[ 0.650135] lo: Disabled Privacy Extensions
[ 0.650444] NET: Registered protocol family 17
[ 0.650470] powernow-k8: Found 1 AMD Athlon(tm) II Dual-Core M300 processors (2 cpu cores) (version 2.20.00)
[ 0.650504] powernow-k8: 0 : pstate 0 (2000 MHz)
[ 0.650506] powernow-k8: 1 : pstate 1 (1400 MHz)
[ 0.650508] powernow-k8: 2 : pstate 2 (800 MHz)
[ 0.674974] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.697592] isapnp: No Plug & Play device found
[ 0.697716] Using IPI No-Shortcut mode
[ 0.697831] PM: Resume from disk failed.
[ 0.697842] registered taskstats version 1
[ 0.698181] Magic number: 6:580:987
[ 0.698308] rtc_cmos 00:04: setting system clock to 2010-04-25 12:57:05 UTC (1272200225)
[ 0.698312] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.698313] EDD information not available.
[ 0.698363] Freeing unused kernel memory: 656k freed
[ 0.698651] Write protecting the kernel text: 4676k
[ 0.698686] Write protecting the kernel read-only data: 1840k
[ 0.704363] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 0.719203] udev: starting version 151
[ 0.819243] ahci 0000:00:11.0: version 3.0
[ 0.819296] alloc irq_desc for 22 on node -1
[ 0.819298] alloc kstat_irqs on node -1
[ 0.819305] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.819398] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.819402] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.819733] tg3.c:v3.102 (September 1, 2009)
[ 0.819793] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.819799] tg3 0000:03:00.0: setting latency timer to 64
[ 0.843331] scsi0 : ahci
[ 0.853493] scsi1 : ahci
[ 0.853615] ata1: SATA max UDMA/133 abar m1024@0xf0408000 port 0xf0408100 irq 22
[ 0.853620] ata2: SATA max UDMA/133 abar m1024@0xf0408000 port 0xf0408180 irq 22
[ 0.886700] usb 2-5: configuration #1 chosen from 1 choice
[ 1.040432] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 1.149097] usb 2-6: configuration #1 chosen from 1 choice
[ 1.160301] Initializing USB Mass Storage driver...
[ 1.160422] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1.160506] usbcore: registered new interface driver usb-storage
[ 1.160508] USB Mass Storage support registered.
[ 1.160514] usb-storage: device found at 3
[ 1.160516] usb-storage: waiting for device to settle before scanning
[ 1.340112] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.343395] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, 1.01, max UDMA/100, ATAPI AN
[ 1.344114] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.345919] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133
[ 1.345923] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.347410] ata2.00: configured for UDMA/100
[ 1.348239] ata1.00: configured for UDMA/133
[ 1.364253] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5
[ 1.364422] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.364492] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.364533] sd 0:0:0:0: [sda] Write Protect is off
[ 1.364536] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.364555] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.364739] sda:
[ 1.366725] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N 1.01 PQ: 0 ANSI: 5
[ 1.374852] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.374857] Uniform CD-ROM driver Revision: 3.20
[ 1.374982] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.375041] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.382209] sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 1.424883] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.484519] eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:26:2d:69:31:0e
[ 1.484523] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.484526] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.484528] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.341484] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 3.457954] Adding 6000236k swap on /dev/sda6. Priority:-1 extents:1 across:6000236k
[ 3.887316] udev: starting version 151
[ 4.851743] lp: driver loaded but no devices found
[ 5.046855] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 5.053780] acer-wmi: Brightness must be controlled by generic video driver
[ 5.132904] type=1505 audit(1272189429.933:2): operation="profile_load" pid=576 name="/sbin/dhclient3"
[ 5.133182] type=1505 audit(1272189429.933:3): operation="profile_load" pid=576 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 5.133336] type=1505 audit(1272189429.933:4): operation="profile_load" pid=576 name="/usr/lib/connman/scripts/dhclient-script"
[ 5.248097] Linux video capture interface: v2.00
[ 5.391905] acpi device:03: registered as cooling_device2
[ 5.392604] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
[ 5.392757] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.440341] cfg80211: Calling CRDA to update world regulatory domain
[ 5.444825] uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044)
[ 5.500658] input: CNF7017 as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input7
[ 5.500745] usbcore: registered new interface driver uvcvideo
[ 5.500928] USB Video Class driver (v0.1.0)
[ 5.782617] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
[ 5.805614] Linux agpgart interface v0.103
[ 6.000696] ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.000706] ath9k 0000:09:00.0: setting latency timer to 64
[ 6.109972] [drm] Initialized drm 1.1.0 20060810
[ 6.110899] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000
[ 6.164668] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[ 6.166792] usb-storage: device scan complete
[ 6.169910] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.170679] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.261989] cfg80211: World regulatory domain updated:
[ 6.261992] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.261996] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.261999] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.262002] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.262004] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.262007] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.425953] ath: EEPROM regdomain: 0x65
[ 6.425956] ath: EEPROM indicates we should expect a direct regpair map
[ 6.425960] ath: Country alpha2 being used: 00
[ 6.425962] ath: Regpair used: 0x65
[ 8.306103] alloc irq_desc for 28 on node -1
[ 8.306106] alloc kstat_irqs on node -1
[ 8.306119] tg3 0000:03:00.0: irq 28 for MSI/MSI-X
[ 8.337205] type=1505 audit(1272189433.137:5): operation="profile_load" pid=874 name="/usr/share/gdm/guest-session/Xsession"
[ 8.338728] type=1505 audit(1272189433.137:6): operation="profile_replace" pid=875 name="/sbin/dhclient3"
[ 8.339014] type=1505 audit(1272189433.137:7): operation="profile_replace" pid=875 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 8.339174] type=1505 audit(1272189433.137:8): operation="profile_replace" pid=875 name="/usr/lib/connman/scripts/dhclient-script"
[ 8.360012] type=1505 audit(1272189433.157:9): operation="profile_load" pid=876 name="/usr/bin/evince"
[ 8.363931] type=1505 audit(1272189433.161:10): operation="profile_load" pid=876 name="/usr/bin/evince-previewer"
[ 8.366297] type=1505 audit(1272189433.165:11): operation="profile_load" pid=876 name="/usr/bin/evince-thumbnailer"
[ 8.384221] type=1505 audit(1272189433.185:12): operation="profile_load" pid=878 name="/usr/lib/cups/backend/cups-pdf"
[ 8.384572] type=1505 audit(1272189433.185:13): operation="profile_load" pid=878 name="/usr/sbin/cupsd"
[ 8.392208] type=1505 audit(1272189433.193:14): operation="profile_load" pid=879 name="/usr/sbin/tcpdump"
[ 8.424469] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.087352] ppdev: user-space parallel port driver
[ 9.824178] usb 2-6: USB disconnect, address 3
[ 9.824865] sd 2:0:0:0: [sdb] READ CAPACITY failed
[ 9.824869] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 9.824874] sd 2:0:0:0: [sdb] Sense not available.
[ 9.824886] sd 2:0:0:0: [sdb] Write Protect is off
[ 9.824888] sd 2:0:0:0: [sdb] Mode Sense: 6c 69 76 65
[ 9.824891] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.825447] sd 2:0:0:0: [sdb] READ CAPACITY failed
[ 9.825450] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 9.825453] sd 2:0:0:0: [sdb] Sense not available.
[ 9.825916] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.825990] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 9.833824] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 9.834554] Registered led device: ath9k-phy0::radio
[ 9.834574] Registered led device: ath9k-phy0::assoc
[ 9.834589] Registered led device: ath9k-phy0::tx
[ 9.834604] Registered led device: ath9k-phy0::rx
[ 9.834615] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8420000, irq=18
[ 9.876365] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.047973] [drm] radeon defaulting to kernel modesetting.
[ 10.047978] [drm] radeon kernel modesetting enabled.
[ 10.048225] radeon 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.048230] radeon 0000:02:00.0: setting latency timer to 64
[ 10.050576] [drm] radeon: Initializing kernel modesetting.
[ 10.050655] [drm] register mmio base: 0xCFEF0000
[ 10.050657] [drm] register mmio size: 65536
[ 10.050706] ATOM BIOS: BR33093.006
[ 10.050721] [drm] Clocks initialized !
[ 10.050894] [drm] Detected VRAM RAM=256M, BAR=256M
[ 10.050898] [drm] RAM width 64bits DDR
[ 10.050982] [TTM] Zone kernel: Available graphics memory: 430258 kiB.
[ 10.050984] [TTM] Zone highmem: Available graphics memory: 1547830 kiB.
[ 10.051001] [drm] radeon: 256M of VRAM memory ready
[ 10.051003] [drm] radeon: 512M of GTT memory ready.
[ 10.051044] alloc irq_desc for 29 on node -1
[ 10.051046] alloc kstat_irqs on node -1
[ 10.051056] radeon 0000:02:00.0: irq 29 for MSI/MSI-X
[ 10.051061] [drm] radeon: using MSI.
[ 10.051090] [drm] radeon: irq initialized.
[ 10.051093] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 10.051425] [drm] Loading RV710 Microcode
[ 10.051430] platform radeon_cp.0: firmware: requesting radeon/RV710_pfp.bin
[ 10.331355] platform radeon_cp.0: firmware: requesting radeon/RV710_me.bin
[ 10.338750] platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin
[ 10.406718] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.406765] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.438259] [drm] ring test succeeded in 1 usecs
[ 10.438374] [drm] radeon: ib pool ready.
[ 10.438441] [drm] ib test succeeded in 0 usecs
[ 10.439271] [drm] Radeon Display Connectors
[ 10.439273] [drm] Connector 0:
[ 10.439275] [drm] LVDS
[ 10.439278] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[ 10.439279] [drm] Encoders:
[ 10.439281] [drm] LCD1: INTERNAL_UNIPHY2
[ 10.439283] [drm] Connector 1:
[ 10.439284] [drm] VGA
[ 10.439286] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 10.439288] [drm] Encoders:
[ 10.439289] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 10.439291] [drm] Connector 2:
[ 10.439292] [drm] HDMI-A
[ 10.439294] [drm] HPD1
[ 10.439296] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 10.439297] [drm] Encoders:
[ 10.439299] [drm] DFP1: INTERNAL_UNIPHY
[ 10.567830] hda_codec: ALC888: BIOS auto-probing.
[ 10.569496] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 10.588347] [drm] fb mappable at 0xD0141000
[ 10.588350] [drm] vram apper at 0xD0000000
[ 10.588352] [drm] size 4325376
[ 10.588353] [drm] fb depth is 24
[ 10.588355] [drm] pitch is 5632
[ 10.588505] fb0: radeondrmfb frame buffer device
[ 10.588507] registered panic notifier
[ 10.588512] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0
[ 10.588847] HDA Intel 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 10.589110] HDA Intel 0000:02:00.1: setting latency timer to 64
[ 10.619324] vga16fb: initializing
[ 10.619329] vga16fb: mapped to 0xc00a0000
[ 10.619335] vga16fb: not registering due to another framebuffer present
[ 12.045486] Console: switching to colour frame buffer device 170x48
[ 18.638805] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 38.582633] wlan0: direct probe to AP 00:1f:9f:c6:20:0c (try 1)
[ 38.582656] wlan0: deauthenticating from 00:1f:9f:c6:20:0c by local choice (reason=3)
[ 38.582674] wlan0: direct probe to AP 00:1f:9f:c6:20:0c (try 1)
[ 38.588445] wlan0: direct probe responded
[ 38.588451] wlan0: authenticate with AP 00:1f:9f:c6:20:0c (try 1)
[ 38.590483] wlan0: authenticated
[ 38.590516] wlan0: associate with AP 00:1f:9f:c6:20:0c (try 1)
[ 38.593366] wlan0: RX AssocResp from 00:1f:9f:c6:20:0c (capab=0x411 status=0 aid=1)
[ 38.593370] wlan0: associated
[ 38.593698] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 49.325074] wlan0: no IPv6 routers present

dmidecode

Κώδικας: Επιλογή όλων

# dmidecode 2.9
SMBIOS 2.6 present.
35 structures occupying 1351 bytes.
Table at 0xBFEDA000.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies LTD
Version: V1.05
Release Date: 10/22/2009
Address: 0xE3C30
Runtime Size: 115664 bytes
ROM Size: 2048 kB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Acer
Product Name: Aspire 5542
Version: 0100
Serial Number: LXPHP0206194628C072000
UUID: A4180920-D415-11DE-B782-AB4449A81905
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Acer
Product Name: JV50TR
Version: Rev
Serial Number: LXPHP0206194628C072000
Asset Tag: Not Specified
Features: None
Location In Chassis: Not Specified
Chassis Handle: 0xFFFF
Type: Unknown
Contained Object Handles: 0

Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: Acer
Type: Notebook
Lock: Not Present
Version: None
Serial Number: None
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: Unspecified
Contained Elements: 0

Handle 0x0004, DMI type 4, 42 bytes
Processor Information
Socket Designation: Socket S1G3
Type: Central Processor
Family: <OUT OF SPEC>
Manufacturer: AMD
ID: 62 0F 10 00 FF FB 8B 17
Version: New Processor Technology
Voltage: 1.2 V
External Clock: 200 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: <OUT OF SPEC>
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 256 KB
Maximum Size: 256 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: 1 ns
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 2-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: 1 ns
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 16-way Set-associative

Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J28
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J33
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J33
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J31
Internal Connector Type: None
External Reference Designator: USB 1
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J32
Internal Connector Type: None
External Reference Designator: USB 2
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J32
Internal Connector Type: None
External Reference Designator: USB 3
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J31
Internal Connector Type: None
External Reference Designator: USB 4
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J30
Internal Connector Type: None
External Reference Designator: Microphone In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J30
Internal Connector Type: None
External Reference Designator: Line In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J30
Internal Connector Type: None
External Reference Designator: Speaker Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port

Handle 0x0011, DMI type 9, 17 bytes
System Slot Information
Designation: MINI PCIE0
Type: x1 PCI Express
Current Usage: Available
Length: Other
ID: 5
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported

Handle 0x0012, DMI type 9, 17 bytes
System Slot Information
Designation: MINI PCIE1
Type: x1 PCI Express
Current Usage: In Use
Length: Other
ID: 6
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported

Handle 0x0013, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: ATI RS880M

Handle 0x0014, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: ESS 1869

Handle 0x0015, DMI type 11, 5 bytes
OEM Strings
String 1:
String 2:
String 3:

Handle 0x0016, DMI type 12, 5 bytes
System Configuration Options
Option 1: J13 1-2 Normal Operation, 2-3 Clear CMOS

Handle 0x0017, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
enUS
Currently Installed Language: enUS

Handle 0x0018, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x00000000
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event

Handle 0x0019, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2

Handle 0x001A, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: No Error
Total Width: 128 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: 1
Locator: S1
Bank Locator: DIMM1
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer:
Serial Number:
Asset Tag:
Part Number:

Handle 0x001B, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0019
Error Information Handle: No Error
Total Width: 128 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 2
Locator: S2
Bank Locator: DIMM2
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer:
Serial Number:
Asset Tag:
Part Number:

Handle 0x001C, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown

Handle 0x001D, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000BFFFFFFF
Range Size: 3 GB
Physical Array Handle: 0x0019
Partition Width: 0

Handle 0x001E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x001A
Memory Array Mapped Address Handle: 0x001D
Partition Row Position: 2
Interleave Position: 1
Interleaved Data Depth: 6

Handle 0x001F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000BFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x001B
Memory Array Mapped Address Handle: 0x001D
Partition Row Position: 2
Interleave Position: 1
Interleaved Data Depth: 6

Handle 0x0020, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>

Handle 0x0021, DMI type 200, 7 bytes
OEM-specific Type
Header and Data:
C8 07 21 00 01 02 03
Strings:
17C0

0001

Handle 0x0022, DMI type 127, 4 bytes
End Of Table

lspci-vv

Κώδικας: Επιλογή όλων

00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: cfe00000-cfefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: f0300000-f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8420 [size=8]
Region 1: I/O ports at 8414 [size=4]
Region 2: I/O ports at 8418 [size=8]
Region 3: I/O ports at 8410 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at f0408000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10)
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10)
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0408400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10)
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10)
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0407000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f0408800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

02:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at cfef0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at cfe00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon

02:00.1 Audio device: ATI Technologies Inc RV710/730
Subsystem: Acer Incorporated [ALI] Device 0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at cfeec000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
Subsystem: Acer Incorporated [ALI] Device 0207
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3

09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e01f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k

Κώδικας: Επιλογή όλων

00:00.0 0600: 1022:9601
Subsystem: 1025:0293
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:02.0 0604: 1022:9603
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: cfe00000-cfefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:04.0 0604: 1022:9604
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:06.0 0604: 1022:9606
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: f0300000-f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:11.0 0106: 1002:4391 (prog-if 01)
Subsystem: 1025:0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8420 [size=8]
Region 1: I/O ports at 8414 [size=4]
Region 2: I/O ports at 8418 [size=8]
Region 3: I/O ports at 8410 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at f0408000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:12.0 0c03: 1002:4397 (prog-if 10)
Subsystem: 1025:0293
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.1 0c03: 1002:4398 (prog-if 10)
Subsystem: 1025:0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 0c03: 1002:4396 (prog-if 20)
Subsystem: 1025:0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0408400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:13.0 0c03: 1002:4397 (prog-if 10)
Subsystem: 1025:0293
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.1 0c03: 1002:4398 (prog-if 10)
Subsystem: 1025:0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0407000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 0c03: 1002:4396 (prog-if 20)
Subsystem: 1025:0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f0408800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:14.0 0c05: 1002:4385 (rev 3c)
Subsystem: 1025:0293
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4

00:14.2 0403: 1002:4383
Subsystem: 1025:0293
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 0601: 1002:439d
Subsystem: 1025:0293
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 0604: 1002:4384 (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 0600: 1022:1200
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 0600: 1022:1201
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 0600: 1022:1202
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 0600: 1022:1203
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.4 0600: 1022:1204
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

02:00.0 0300: 1002:9553
Subsystem: 1025:0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at cfef0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at cfe00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon

02:00.1 0403: 1002:aa38
Subsystem: 1025:0293
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at cfeec000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

03:00.0 0200: 14e4:1698 (rev 10)
Subsystem: 1025:0207
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3

09:00.0 0280: 168c:002a (rev 01)
Subsystem: 105b:e01f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k

[the_eye]

Από ότι βλέπω έχεις bios έκδοση 1.05 και έχει βγεί 1.08 κάνε μια αναβάθμιση, μπορεί να λύσει κάποια προβλήματα.
http://global-download.acer.com/GDFiles ... SC=EMEA_27

[emmsarris]

Δε μπορώ να κάνω αναβάθμιση. Δεν έχει κάποια επιλογή στην έναρξη, ούτε κάποια εφαρμογή στα Windows, ούτε μπόρεσα να βρώ κάποιο τρόπο να κάνω update.
Από τη σελίδα της ACER βρήκα το αντίστοιχο update αλλά όταν τρέξω το BIOS.dat όπως λένε οι οδηγίες, πετάει σφάλμα...

Και στο κάτω-κάτω πρόβλημα του ubuntu είναι...Το fedora τερματίζει κανονικά. Γιατί να παίζω με κάτι που δεν ξέρω..?

[vagrale13]

Δοκιμασε με την RC, και δες αν απο το livecd μπορει να κλεισει κανονικα ο υπολογιστης σου!

[the_eye]

Δε μπορώ να κάνω αναβάθμιση. Δεν έχει κάποια επιλογή στην έναρξη, ούτε κάποια εφαρμογή στα Windows, ούτε μπόρεσα να βρώ κάποιο τρόπο να κάνω update.
Από τη σελίδα της ACER βρήκα το αντίστοιχο update αλλά όταν τρέξω το BIOS.dat όπως λένε οι οδηγίες, πετάει σφάλμα...

Και στο κάτω-κάτω πρόβλημα του ubuntu είναι...Το fedora τερματίζει κανονικά. Γιατί να παίζω με κάτι που δεν ξέρω..?

Επειδή κατάλαβα ότι δεν κατάλαβες τι είναι το bios
http://el.wikipedia.org/wiki/BIOS