Πρόβλημα error-attempt to read or write outside of disk

[qsd330]

αφου μπαινει κανονικα τις περισσοτερες φορεσ ξεκινα ενα buckup καλου κακου...

απο την αλλη αφου δεν φαινεται καποιο Overlaping τοτε ελενξε
1)αν εχεις ενεργο acph στο bios
2)αναβαθμιση του Bios αν υπαρχει
3)ναι bootable usb μας κανει μπες απο εκει και κανε με το gparted ενα check partition

[ThomasMylonas]

Καλημέρα φίλε!
acph στο bios δεν έχω! Δεν υπάρχει τέτοια επιλογή...
Αναβάθμιση bios αποκλείεται.... Είναι διαδικασία που δεν την έχω ξανακάνει, δεν την δοκιμάζω και δεν χρειάστηκε ποτέ... Πριν το 16.04 δεν εμφάνισε ποτέ πρόβλημα...

Το bootable θα το δοκιμάσω σημερα ή αύριο (λόγω κάποιων υποχρεώσεων) και θα σου πω αποτελέσματα....

[the_eye]

Όταν στο ξαναβγάλει δώσε μας το αποτέλεσμα της dmesg

[ThomasMylonas]

Ναι φιλε, θα το κανω!!!

[ThomasMylonas]

Για σας φίλοι! Αργοπόρησα γιατί τώρα ευκαίρησα!

Από τότε που μιλήσαμε δεν μου το ξαναέκανε. Αν θέλετε ποστάρω και τι μου έβγαλε το "dmesg", αλλά βγάζει μεγάλο πράγμα....
Έβαλα το boot-usb και έτρεξα το gparted.....

Με το που το έτρεξα έβγαλε το μήνυμα:

The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.

Προσοχή αυτό το βγάζει με boot-usb... όχι από την κανονική εγκατάσταση του Ubuntu!

Έκανα check μόνο το partition του Ubuntu [τα άλλα που είναι ntfs δεν τα έκανα γιατί έχω κανένα λόγο... δεν παρουσιάσαν κανένα πρόβλημα με άλλη έκδοση ή άλλη διανομή].

Το check έβγαλε:

Κώδικας: Επιλογή όλων


GParted 0.25.0 --enable-libparted-dmraid --enable-online-resize

Libparted 3.2
Check and repair file system (ext4) on /dev/sda3 00:00:07 ( SUCCESS )

calibrate /dev/sda3 00:00:00 ( SUCCESS )

path: /dev/sda3 (partition)
start: 204800000
end: 400112499
size: 195312500 (93.13 GiB)
check file system on /dev/sda3 for errors and (if possible) fix them 00:00:07 ( SUCCESS )

e2fsck -f -y -v -C 0 /dev/sda3 00:00:07 ( SUCCESS )

Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information

458985 inodes used (7.51%, out of 6111232)
1651 non-contiguous files (0.4%)
403 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 398261/85
7562830 blocks used (30.98%, out of 24414062)
0 bad blocks
1 large file

339601 regular files
41347 directories
55 character device files
25 block device files
0 fifos
28 links
77947 symbolic links (60550 fast symbolic links)
1 socket
------------
459004 files
e2fsck 1.42.13 (17-May-2015)
grow file system to fill the partition 00:00:00 ( SUCCESS )

resize2fs -p /dev/sda3 00:00:00 ( SUCCESS )

resize2fs 1.42.13 (17-May-2015)
The filesystem is already 24414062 (4k) blocks long. Nothing to do!
========================================


Τι διάγνωση βγάζετε? Ευχαριστώ!!

[the_eye]

Δώσε dmesg και ότι βγάλει εδώ
viewtopic.php?f=9&t=19749

[ThomasMylonas]

Ζητώ συγνώμη για την καθηστέρηση της απάντησης.... Τώρα είδα την απάντηση σου the_eye!

dmesg

Κώδικας: Επιλογή όλων


$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-42-generic (buildd@lgw01-13) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #62-Ubuntu SMP Fri Oct 7 23:11:45 UTC 2016 (Ubuntu 4.4.0-42.62-generic 4.4.21)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-42-generic root=UUID=5bfed945-e329-41fd-9ac9-f8b7c6e592f1 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf535fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf536000-0x00000000bf58cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf58d000-0x00000000bf5acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf5ad000-0x00000000bf5bdfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf5be000-0x00000000bf5d1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf5d2000-0x00000000bf5d3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf5d4000-0x00000000bf5d4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf5d5000-0x00000000bf5dcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf5dd000-0x00000000bf5e6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf5e7000-0x00000000bf640fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf641000-0x00000000bf683fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf684000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8H61-M, BIOS 1102 09/27/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 13F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 3, base: 5112MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 4088M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 5112MB, range: 8MB, type UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fccc0-0x000fcccf] mapped at [ffff8800000fccc0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33aa2000-0x35d48fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0420 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BF580068 00004C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BF589378 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BF580140 009233 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BF5DEF80 000040
[ 0.000000] ACPI: APIC 0x00000000BF589470 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BF5894E8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000BF5895F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BF589630 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13f7f8000-0x13f7fcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013f7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf535fff]
[ 0.000000] node 0: [mem 0x00000000bf5d2000-0x00000000bf5d3fff]
[ 0.000000] node 0: [mem 0x00000000bf684000-0x00000000bf7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013f7fffff]
[ 0.000000] On node 0 totalpages: 1044049
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12187 pages used for memmap
[ 0.000000] DMA32 zone: 779956 pages, LIFO batch:31
[ 0.000000] Normal zone: 4064 pages used for memmap
[ 0.000000] Normal zone: 260096 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf536000-0xbf58cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf58d000-0xbf5acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5ad000-0xbf5bdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5be000-0xbf5d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5d4000-0xbf5d4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5d5000-0xbf5dcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5dd000-0xbf5e6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5e7000-0xbf640fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf641000-0xbf683fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013f400000 s98008 r8192 d28968 u524288
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027713
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-42-generic root=UUID=5bfed945-e329-41fd-9ac9-f8b7c6e592f1 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3989768K/4176196K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 186428K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3291.568 MHz processor
[ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 6583.13 BogoMIPS (lpj=13166272)
[ 0.000029] pid_max: default: 32768 minimum: 301
[ 0.000033] ACPI: Core revision 20150930
[ 0.003421] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.003437] Security Framework initialized
[ 0.003439] Yama: becoming mindful.
[ 0.003451] AppArmor: AppArmor initialized
[ 0.003651] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004518] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004947] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004951] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005148] Initializing cgroup subsys io
[ 0.005152] Initializing cgroup subsys memory
[ 0.005158] Initializing cgroup subsys devices
[ 0.005160] Initializing cgroup subsys freezer
[ 0.005162] Initializing cgroup subsys net_cls
[ 0.005163] Initializing cgroup subsys perf_event
[ 0.005165] Initializing cgroup subsys net_prio
[ 0.005168] Initializing cgroup subsys hugetlb
[ 0.005169] Initializing cgroup subsys pids
[ 0.005185] CPU: Physical Processor ID: 0
[ 0.005186] CPU: Processor Core ID: 0
[ 0.005190] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.005190] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005192] mce: CPU supports 7 MCE banks
[ 0.005201] CPU0: Thermal monitoring enabled (TM1)
[ 0.005206] process: using mwait in idle threads
[ 0.005209] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.005210] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.005525] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[ 0.007213] ftrace: allocating 32007 entries in 126 pages
[ 0.019133] smpboot: Max logical packages: 2
[ 0.019136] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.019524] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059211] TSC deadline timer enabled
[ 0.059214] smpboot: CPU0: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.059228] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.059244] core: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.059245] ... version: 3
[ 0.059246] ... bit width: 48
[ 0.059247] ... generic registers: 4
[ 0.059247] ... value mask: 0000ffffffffffff
[ 0.059248] ... max period: 0000ffffffffffff
[ 0.059249] ... fixed-purpose events: 3
[ 0.059250] ... event mask: 000000070000000f
[ 0.059843] x86: Booting SMP configuration:
[ 0.059844] .... node #0, CPUs: #1
[ 0.062234] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.062298] #2 #3
[ 0.067079] x86: Booted up 1 node, 4 CPUs
[ 0.067083] smpboot: Total of 4 processors activated (26332.54 BogoMIPS)
[ 0.069536] devtmpfs: initialized
[ 0.071210] evm: security.selinux
[ 0.071211] evm: security.SMACK64
[ 0.071212] evm: security.SMACK64EXEC
[ 0.071213] evm: security.SMACK64TRANSMUTE
[ 0.071213] evm: security.SMACK64MMAP
[ 0.071214] evm: security.ima
[ 0.071215] evm: security.capability
[ 0.071262] PM: Registering ACPI NVS region [mem 0xbf536000-0xbf58cfff] (356352 bytes)
[ 0.071267] PM: Registering ACPI NVS region [mem 0xbf5ad000-0xbf5bdfff] (69632 bytes)
[ 0.071268] PM: Registering ACPI NVS region [mem 0xbf5d4000-0xbf5d4fff] (4096 bytes)
[ 0.071269] PM: Registering ACPI NVS region [mem 0xbf5dd000-0xbf5e6fff] (40960 bytes)
[ 0.071270] PM: Registering ACPI NVS region [mem 0xbf641000-0xbf683fff] (274432 bytes)
[ 0.071332] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.071394] pinctrl core: initialized pinctrl subsystem
[ 0.071481] RTC time: 21:15:27, date: 10/16/16
[ 0.071563] NET: Registered protocol family 16
[ 0.081404] cpuidle: using governor ladder
[ 0.090197] cpuidle: using governor menu
[ 0.090203] PCCT header not found.
[ 0.090292] ACPI: bus type PCI registered
[ 0.090293] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.090344] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.090345] PCI: not using MMCONFIG
[ 0.090346] PCI: Using configuration type 1 for base access
[ 0.090373] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.101704] ACPI: Added _OSI(Module Device)
[ 0.101705] ACPI: Added _OSI(Processor Device)
[ 0.101706] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.101707] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.103162] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.104461] ACPI: Dynamic OEM Table Load:
[ 0.104465] ACPI: SSDT 0xFFFF880139E92400 00038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.104704] ACPI: Dynamic OEM Table Load:
[ 0.104707] ACPI: SSDT 0xFFFF880139E83900 000084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.105187] ACPI: Interpreter enabled
[ 0.105194] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.105202] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.105203] ACPI: Using IOAPIC for interrupt routing
[ 0.105222] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.105260] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.105266] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.105465] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.109140] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.109144] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.109235] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[ 0.109318] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.109324] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.109384] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cffff])
[ 0.109505] PCI host bridge to bus 0000:00
[ 0.109507] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.109508] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.109510] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.109511] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.109512] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.109518] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.109582] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.109606] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.109631] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.109685] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.109715] pci 0000:00:16.0: reg 0x10: [mem 0xfe707000-0xfe70700f 64bit]
[ 0.109774] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.109836] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.109863] pci 0000:00:1a.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
[ 0.109932] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.109962] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.109994] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.110019] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
[ 0.110076] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.110134] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.110205] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.110236] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.110267] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.110338] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.110369] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.110399] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.110470] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.110501] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.110532] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.110602] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.110633] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.110663] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
[ 0.110735] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.110766] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.110798] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.110869] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.110900] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.110933] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.110959] pci 0000:00:1d.0: reg 0x10: [mem 0xfe705000-0xfe7053ff]
[ 0.111028] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.111057] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.111088] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.111232] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[ 0.111251] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.111258] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.111265] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.111272] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.111280] pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
[ 0.111287] pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
[ 0.111354] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.111370] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
[ 0.111389] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.111451] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[ 0.111469] pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
[ 0.111476] pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
[ 0.111484] pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
[ 0.111491] pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
[ 0.111498] pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
[ 0.111505] pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
[ 0.111597] pci 0000:01:00.0: [1002:6758] type 00 class 0x030000
[ 0.111620] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.111630] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
[ 0.111636] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.111648] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
[ 0.111673] pci 0000:01:00.0: supports D1 D2
[ 0.111710] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[ 0.111733] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
[ 0.111783] pci 0000:01:00.1: supports D1 D2
[ 0.117435] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.117439] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.117443] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.117448] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.117515] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.117560] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.117624] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.117671] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.117703] pci 0000:04:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.117724] pci 0000:04:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.117805] pci 0000:04:00.0: supports D1 D2
[ 0.117806] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125445] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.125452] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.125462] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.125524] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.125589] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
[ 0.125703] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.125728] pci 0000:00:1c.4: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.125738] pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.125739] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.125741] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.125742] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.125851] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.125873] pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.125874] pci 0000:06:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.125875] pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.125876] pci 0000:06:00.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.125925] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.126310] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.126347] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.126383] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.126417] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.126452] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.126487] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.126521] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.126556] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.126611] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.126701] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.126703] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.126704] vgaarb: loaded
[ 0.126705] vgaarb: bridge control possible 0000:01:00.0
[ 0.126865] SCSI subsystem initialized
[ 0.126899] libata version 3.00 loaded.
[ 0.126915] ACPI: bus type USB registered
[ 0.126927] usbcore: registered new interface driver usbfs
[ 0.126934] usbcore: registered new interface driver hub
[ 0.126946] usbcore: registered new device driver usb
[ 0.127050] PCI: Using ACPI for IRQ routing
[ 0.128398] PCI: pci_cache_line_size set to 64 bytes
[ 0.128446] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.128447] e820: reserve RAM buffer [mem 0xbf536000-0xbfffffff]
[ 0.128449] e820: reserve RAM buffer [mem 0xbf5d4000-0xbfffffff]
[ 0.128450] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.128451] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
[ 0.128537] NetLabel: Initializing
[ 0.128537] NetLabel: domain hash size = 128
[ 0.128538] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.128548] NetLabel: unlabeled traffic allowed by default
[ 0.128604] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.128608] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.130620] amd_nb: Cannot enumerate AMD northbridges
[ 0.130632] clocksource: Switched to clocksource hpet
[ 0.135275] AppArmor: AppArmor Filesystem Enabled
[ 0.135332] pnp: PnP ACPI init
[ 0.135449] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.135451] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.135452] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.135453] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.135455] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.135458] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.135519] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.135521] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135710] pnp 00:02: [dma 0 disabled]
[ 0.135781] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.135800] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.135837] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.135839] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135977] pnp 00:05: [dma 0 disabled]
[ 0.136012] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.136123] system 00:06: [io 0x0400-0x0453] could not be reserved
[ 0.136125] system 00:06: [io 0x0458-0x047f] has been reserved
[ 0.136126] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.136128] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.136129] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.136131] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.136132] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.136134] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.136175] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.136177] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.136309] pnp: PnP ACPI: found 8 devices
[ 0.142402] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.142466] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.142468] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.142471] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.142473] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.142475] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.142486] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.142497] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.142499] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.142506] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.142511] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.142522] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 0.142541] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.142551] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.142563] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.142564] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.142565] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.142567] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff window]
[ 0.142568] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.142569] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.142571] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.142572] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.142573] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.142575] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.142576] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.142577] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.142579] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xffffffff window]
[ 0.142580] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 0.142581] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
[ 0.142582] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.142584] pci_bus 0000:07: resource 7 [mem 0xc0000000-0xffffffff window]
[ 0.142609] NET: Registered protocol family 2
[ 0.142728] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.142795] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.142888] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.142909] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.142922] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.142962] NET: Registered protocol family 1
[ 0.398743] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.398753] PCI: CLS 64 bytes, default 64
[ 0.398793] Trying to unpack rootfs image as initramfs...
[ 0.809092] Freeing initrd memory: 35484K (ffff880033aa2000 - ffff880035d49000)
[ 0.809132] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.809133] software IO TLB [mem 0xbb536000-0xbf536000] (64MB) mapped at [ffff8800bb536000-ffff8800bf535fff]
[ 0.809192] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.809193] hw unit of domain pp0-core 2^-16 Joules
[ 0.809194] hw unit of domain package 2^-16 Joules
[ 0.809195] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.809316] Scanning for low memory corruption every 60 seconds
[ 0.809584] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.809614] audit: initializing netlink subsys (disabled)
[ 0.809627] audit: type=2000 audit(1476652527.804:1): initialized
[ 0.809964] Initialise system trusted keyring
[ 0.810062] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.811195] zbud: loaded
[ 0.811345] VFS: Disk quotas dquot_6.6.0
[ 0.811371] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.811589] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.811768] fuse init (API version 7.23)
[ 0.811869] Key type big_key registered
[ 0.811893] Allocating IMA MOK and blacklist keyrings.
[ 0.812202] Key type asymmetric registered
[ 0.812204] Asymmetric key parser 'x509' registered
[ 0.812230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.812253] io scheduler noop registered
[ 0.812255] io scheduler deadline registered (default)
[ 0.812277] io scheduler cfq registered
[ 0.812962] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.812964] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.812965] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.812967] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.812986] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.812990] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.813007] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.813011] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.813029] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.813030] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.813034] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.813052] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.813055] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.813072] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.813076] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.813082] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.813087] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.813109] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.813110] vesafb: scrolling: redraw
[ 0.813111] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.813121] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 5824k, total 5824k
[ 0.813194] Console: switching to colour frame buffer device 175x65
[ 0.813209] fb0: VESA VGA frame buffer device
[ 0.813222] intel_idle: MWAIT substates: 0x1120
[ 0.813223] intel_idle: v0.4.1 model 0x2A
[ 0.813224] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.813373] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.813377] ACPI: Power Button [PWRB]
[ 0.813404] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.813405] ACPI: Power Button [PWRF]
[ 0.813762] GHES: HEST is not enabled!
[ 0.813833] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.834243] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.835458] Linux agpgart interface v0.103
[ 0.837489] brd: module loaded
[ 0.838370] loop: module loaded
[ 0.838475] ata_piix 0000:00:1f.2: version 2.13
[ 0.838538] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.991471] scsi host0: ata_piix
[ 0.991660] scsi host1: ata_piix
[ 0.991698] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
[ 0.991703] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
[ 0.991765] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.146727] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 1.147409] scsi host2: ata_piix
[ 1.147532] scsi host3: ata_piix
[ 1.147568] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
[ 1.147569] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
[ 1.147652] libphy: Fixed MDIO Bus: probed
[ 1.147654] tun: Universal TUN/TAP device driver, 1.6
[ 1.147656] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.147702] PPP generic driver version 2.4.2
[ 1.147755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.147758] ehci-pci: EHCI PCI platform driver
[ 1.147830] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.147835] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.147846] ehci-pci 0000:00:1a.0: debug port 2
[ 1.151754] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.151762] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfe706000
[ 1.162690] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.162736] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.162738] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.162739] usb usb1: Product: EHCI Host Controller
[ 1.162740] usb usb1: Manufacturer: Linux 4.4.0-42-generic ehci_hcd
[ 1.162741] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.162840] hub 1-0:1.0: USB hub found
[ 1.162844] hub 1-0:1.0: 2 ports detected
[ 1.162971] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.162975] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.162985] ehci-pci 0000:00:1d.0: debug port 2
[ 1.166890] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.166894] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe705000
[ 1.178685] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.178713] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.178714] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.178715] usb usb2: Product: EHCI Host Controller
[ 1.178716] usb usb2: Manufacturer: Linux 4.4.0-42-generic ehci_hcd
[ 1.178717] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.178797] hub 2-0:1.0: USB hub found
[ 1.178801] hub 2-0:1.0: 2 ports detected
[ 1.178874] ehci-platform: EHCI generic platform driver
[ 1.178882] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.178885] ohci-pci: OHCI PCI platform driver
[ 1.178893] ohci-platform: OHCI generic platform driver
[ 1.178898] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.178940] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.181501] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.181505] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.181606] mousedev: PS/2 mouse device common for all mice
[ 1.181718] rtc_cmos 00:03: RTC can wake from S4
[ 1.181840] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.181865] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.181871] i2c /dev entries driver
[ 1.181910] device-mapper: uevent: version 1.0.3
[ 1.181964] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.181980] Intel P-state driver initializing.
[ 1.182098] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.182578] NET: Registered protocol family 10
[ 1.182847] NET: Registered protocol family 17
[ 1.182865] Key type dns_resolver registered
[ 1.183140] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
[ 1.183179] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
[ 1.183192] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1a
[ 1.183234] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1a
[ 1.183294] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.183530] registered taskstats version 1
[ 1.183552] Loading compiled-in X.509 certificates
[ 1.184985] Loaded X.509 cert 'Build time autogenerated kernel key: e837129128998c98ce5a834cc756a195b6db2f40'
[ 1.185015] zswap: loaded using pool lzo/zbud
[ 1.187267] Key type trusted registered
[ 1.189537] Key type encrypted registered
[ 1.189541] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.189544] ima: No TPM chip found, activating TPM-bypass!
[ 1.189559] evm: HMAC attrs: 0x1
[ 1.189835] Magic number: 4:176:298
[ 1.189928] rtc_cmos 00:03: setting system clock to 2016-10-16 21:15:28 UTC (1476652528)
[ 1.189979] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.189980] EDD information not available.
[ 1.190033] PM: Hibernation image not present or could not be loaded.
[ 1.314217] ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NS70, GN00, max UDMA/100
[ 1.326903] ata4.00: configured for UDMA/100
[ 1.474742] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.490742] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.607439] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.607441] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.607837] hub 1-1:1.0: USB hub found
[ 1.608062] hub 1-1:1.0: 4 ports detected
[ 1.623115] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.623120] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.623424] hub 2-1:1.0: USB hub found
[ 1.623618] hub 2-1:1.0: 6 ports detected
[ 1.806751] tsc: Refined TSC clocksource calibration: 3291.699 MHz
[ 1.806756] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f72aabd13d, max_idle_ns: 440795352701 ns
[ 1.894759] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[ 1.994039] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0084
[ 1.994044] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.994047] usb 2-1.1: Product: Basic Optical Mouse
[ 1.994050] usb 2-1.1: Manufacturer: Microsoft
[ 2.066766] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
[ 2.168394] usb 2-1.6: New USB device found, idVendor=0a81, idProduct=0205
[ 2.168399] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.168401] usb 2-1.6: Product: PS2 to USB Converter
[ 2.168404] usb 2-1.6: Manufacturer: CHESEN
[ 2.338776] ata2.01: failed to resume link (SControl 0)
[ 2.342777] ata1.01: failed to resume link (SControl 0)
[ 2.494844] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.494856] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 2.498843] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.498855] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 2.503239] ata2.00: ATA-8: WDC WD3200AAKS-00L9A0, 01.03E01, max UDMA/133
[ 2.503244] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.507024] ata1.00: ATA-9: WDC WD10EZEX-60M2NA0, 01.01A01, max UDMA/100
[ 2.507026] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.511246] ata2.00: configured for UDMA/133
[ 2.515026] ata1.00: configured for UDMA/100
[ 2.515250] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-60M 1A01 PQ: 0 ANSI: 5
[ 2.515514] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.515529] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.515532] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.515610] sd 0:0:0:0: [sda] Write Protect is off
[ 2.515613] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.515644] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.515651] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 3E01 PQ: 0 ANSI: 5
[ 2.515779] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.515799] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.515840] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.515842] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.515921] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.518802] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS70 GN00 PQ: 0 ANSI: 5
[ 2.523968] sdb: sdb1
[ 2.524253] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.532175] sda: sda1 sda2 sda3 sda4
[ 2.532610] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.542447] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.542450] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.542558] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.542603] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 2.543618] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[ 2.543619] Write protecting the kernel read-only data: 14336k
[ 2.543990] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
[ 2.544303] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 2.551888] random: systemd-udevd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.551946] random: systemd-udevd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.551957] random: systemd-udevd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.552274] random: udevadm: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.552310] random: udevadm: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.552494] random: udevadm: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.552533] random: udevadm: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.552570] random: udevadm: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.552606] random: udevadm: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.552646] random: udevadm: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[ 2.571702] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.578168] wmi: Mapper loaded
[ 2.584559] [drm] Initialized drm 1.1.0 20060810
[ 2.584695] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.585252] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc900007a4000, 54:04:a6:a1:f5:06, XID 0c900800 IRQ 30
[ 2.585255] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.587308] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.604498] usbcore: registered new interface driver usbhid
[ 2.604501] usbhid: USB HID core driver
[ 2.622111] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 2.623711] [drm] radeon kernel modesetting enabled.
[ 2.624540] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:0084.0001/input/input5
[ 2.624805] hid-generic 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 2.624902] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0A81:0205.0002/input/input6
[ 2.625537] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.625539] AMD IOMMUv2 functionality not available on this system
[ 2.627994] CRAT table not found
[ 2.627996] Finished initializing topology ret=0
[ 2.628039] kfd kfd: Initialized module
[ 2.628217] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
[ 2.628218] fb: switching to radeondrmfb from VESA VGA
[ 2.628239] Console: switching to colour dummy device 80x25
[ 2.628481] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x1043:0x03EA).
[ 2.628490] [drm] register mmio base: 0xFE620000
[ 2.628491] [drm] register mmio size: 131072
[ 2.628527] ATOM BIOS: 6758.13.12.0.9.AS01
[ 2.628679] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.628680] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 2.628682] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.628682] [drm] RAM width 128bits DDR
[ 2.628721] [TTM] Zone kernel: Available graphics memory: 2014368 kiB
[ 2.628722] [TTM] Initializing pool allocator
[ 2.628726] [TTM] Initializing DMA pool allocator
[ 2.628740] [drm] radeon: 1024M of VRAM memory ready
[ 2.628741] [drm] radeon: 1024M of GTT memory ready.
[ 2.628749] [drm] Loading TURKS Microcode
[ 2.628807] [drm] Internal thermal controller with fan control
[ 2.633674] [drm] radeon: dpm initialized
[ 2.633771] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.634472] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 2.652108] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 2.652229] radeon 0000:01:00.0: WB enabled
[ 2.652232] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88013829ec00
[ 2.652233] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88013829ec0c
[ 2.653681] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001032118
[ 2.653684] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.653685] [drm] Driver supports precise vblank timestamp query.
[ 2.653686] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.653715] radeon 0000:01:00.0: radeon: using MSI.
[ 2.653746] [drm] radeon: irq initialized.
[ 2.670107] [drm] ring test on 0 succeeded in 3 usecs
[ 2.670118] [drm] ring test on 3 succeeded in 7 usecs
[ 2.678892] hid-generic 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.6/input0
[ 2.679041] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:0A81:0205.0003/input/input7
[ 2.734903] hid-generic 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.6/input1
[ 2.845827] clocksource: Switched to clocksource tsc
[ 2.845857] [drm] ring test on 5 succeeded in 2 usecs
[ 2.845871] [drm] UVD initialized successfully.
[ 2.846106] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.846158] [drm] ib test on ring 3 succeeded in 0 usecs
[ 3.494900] [drm] ib test on ring 5 succeeded
[ 3.496065] [drm] Radeon Display Connectors
[ 3.496067] [drm] Connector 0:
[ 3.496068] [drm] DP-1
[ 3.496070] [drm] HPD4
[ 3.496072] [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[ 3.496073] [drm] Encoders:
[ 3.496074] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.496076] [drm] Connector 1:
[ 3.496076] [drm] HDMI-A-1
[ 3.496077] [drm] HPD2
[ 3.496079] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 3.496080] [drm] Encoders:
[ 3.496081] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.496082] [drm] Connector 2:
[ 3.496083] [drm] DVI-I-1
[ 3.496085] [drm] HPD1
[ 3.496086] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 3.496088] [drm] Encoders:
[ 3.496089] [drm] DFP3: INTERNAL_UNIPHY
[ 3.496090] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.558107] [drm] fb mappable at 0xC0475000
[ 3.558108] [drm] vram apper at 0xC0000000
[ 3.558109] [drm] size 7299072
[ 3.558109] [drm] fb depth is 24
[ 3.558110] [drm] pitch is 6912
[ 3.558149] fbcon: radeondrmfb (fb0) is primary device
[ 3.558223] Console: switching to colour frame buffer device 210x65
[ 3.558251] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.570925] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 3.660729] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.936638] random: nonblocking pool is initialized
[ 4.283759] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.283856] systemd[1]: Detected architecture x86-64.
[ 4.287818] systemd[1]: Set hostname to <tom-DESKTOP>.
[ 5.166399] systemd[1]: Created slice System Slice.
[ 5.166468] systemd[1]: Created slice User and Session Slice.
[ 5.166500] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.166525] systemd[1]: Listening on Journal Socket.
[ 5.178979] systemd[1]: Starting Load Kernel Modules...
[ 5.179056] systemd[1]: Listening on Journal Audit Socket.
[ 5.179370] systemd[1]: Started Braille Device Support.
[ 5.179855] systemd[1]: Listening on udev Control Socket.
[ 5.180193] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.180534] systemd[1]: Starting Uncomplicated firewall...
[ 5.180597] systemd[1]: Listening on Syslog Socket.
[ 5.180985] systemd[1]: Starting Journal Service...
[ 5.181303] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.181328] systemd[1]: Reached target User and Group Name Lookups.
[ 5.181768] systemd[1]: Mounting Huge Pages File System...
[ 5.181781] systemd[1]: Reached target Swap.
[ 5.182089] systemd[1]: Started Read required files in advance.
[ 5.182149] systemd[1]: Reached target Slices.
[ 5.182170] systemd[1]: Reached target Encrypted Volumes.
[ 5.182450] systemd[1]: Starting Set console keymap...
[ 5.182735] systemd[1]: Mounting Debug File System...
[ 5.182776] systemd[1]: Listening on udev Kernel Socket.
[ 5.182821] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.182970] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.333233] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.333293] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.333307] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.333319] systemd[1]: Reached target Remote File Systems.
[ 5.391534] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.407048] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.445030] systemd[1]: Started Uncomplicated firewall.
[ 5.514714] lp: driver loaded but no devices found
[ 5.539989] ppdev: user-space parallel port driver
[ 5.564402] parport_pc 00:02: reported by Plug and Play ACPI
[ 5.564466] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 5.583051] systemd[1]: Mounted Huge Pages File System.
[ 5.583084] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.583096] systemd[1]: Mounted Debug File System.
[ 5.658997] lp0: using parport0 (interrupt-driven).
[ 5.677094] systemd[1]: Started Load Kernel Modules.
[ 5.699027] systemd[1]: Mounting FUSE Control File System...
[ 5.699620] systemd[1]: Starting Apply Kernel Variables...
[ 5.700048] systemd[1]: Started Journal Service.
[ 7.325225] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 7.488885] systemd-journald[238]: Received request to flush runtime journal from PID 1
[ 8.070840] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20150930/utaddress-254)
[ 8.070845] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.070846] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20150930/utaddress-254)
[ 8.070849] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.070850] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20150930/utaddress-254)
[ 8.070852] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20150930/utaddress-254)
[ 8.070854] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.070855] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.175454] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.029610] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 9.076701] asus_wmi: ASUS WMI generic driver loaded
[ 9.112765] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 9.138829] asus_wmi: Initialization: 0x0
[ 9.138856] asus_wmi: BIOS WMI version: 0.9
[ 9.138890] asus_wmi: SFUN value: 0x0
[ 9.139107] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[ 9.139174] asus_wmi: Number of fans: 1
[ 9.206445] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 9.206448] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.206450] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.206451] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.206452] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 9.206453] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.206455] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 9.206456] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 9.206458] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 9.218248] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.218821] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.218901] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.218973] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.219052] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.230830] kvm: disabled by bios
[ 9.259785] kvm: disabled by bios
[ 9.287623] kvm: disabled by bios
[ 9.791772] intel_rapl: Found RAPL domain package
[ 9.791775] intel_rapl: Found RAPL domain core
[ 9.791777] intel_rapl: Found RAPL domain uncore
[ 9.791783] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 11.705243] audit: type=1400 audit(1476652539.011:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=641 comm="apparmor_parser"
[ 11.705250] audit: type=1400 audit(1476652539.011:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=641 comm="apparmor_parser"
[ 11.705253] audit: type=1400 audit(1476652539.011:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=641 comm="apparmor_parser"
[ 11.705257] audit: type=1400 audit(1476652539.011:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=641 comm="apparmor_parser"
[ 11.754722] audit: type=1400 audit(1476652539.059:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=645 comm="apparmor_parser"
[ 11.763707] audit: type=1400 audit(1476652539.071:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=640 comm="apparmor_parser"
[ 11.763715] audit: type=1400 audit(1476652539.071:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=640 comm="apparmor_parser"
[ 11.784630] audit: type=1400 audit(1476652539.091:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=644 comm="apparmor_parser"
[ 11.784637] audit: type=1400 audit(1476652539.091:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=644 comm="apparmor_parser"
[ 11.824827] audit: type=1400 audit(1476652539.131:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=646 comm="apparmor_parser"
[ 18.100184] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 18.393548] r8169 0000:04:00.0 enp4s0: link down
[ 18.393567] r8169 0000:04:00.0 enp4s0: link down
[ 18.393613] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 20.537644] r8169 0000:04:00.0 enp4s0: link up
[ 20.537653] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready


[the_eye]

Δες και το link που σου έδωσα.

[ThomasMylonas]

Ναι φιλε θα το δω!!