Πρόβλημα με Ubuntu 12.04 - Initramfs

από **Learner** » 25 Σεπ 2012, 15:57

Για να δεις αν "έσκασε" ο δίσκος , κάνε ένα boot από το LiveCD/Usb του Ubuntu (πάλι) και τρέξε τις παρακάτω εντολές

Κώδικας: Επιλογή όλων: sudo apt-get install smartmontools --no-install-recommends

Κώδικας: Επιλογή όλων: sudo smartctl -a /dev/sda

/dev/sda = Ο 80αρης , αν εκεί έχεις εγκατεστημένο το Ubuntu.

Κάνε ποστ τα αποτελέσματα εδώ . Ανάμεσα σε κώδικα [code]

Επίσης από την υπογραφή σου (βλέπω πως την ανανέωσες) φαίνεται πως έχεις το Ubuntu 11.04 (natty) και όχι το 12.04 .

από **simosx** » 25 Σεπ 2012, 15:59

Tuxer έγραψε:
Disk /dev/sda: 80.0 GB, 80026361856 bytes

80-άρης, άλλα παλιός.

Με το LiveCD/LiveUSB μπορείς να δεις τεχνικές πληροφορίες για το δίσκο όπως κατεστραμμένους τομείς.
Είναι το palimpsest (Disk Utility) ή αλλιώς Εργαλείο δίσκων.

(με πρόλαβε ο Learner με την εντολή smartctl που κάνει το ίδιο από τη γραμμή εντολής)

από **Tuxer** » 25 Σεπ 2012, 16:04

Κώδικας: Επιλογή όλων: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info September 18th 2012] ============================= Boot Info Summary: =============================== => Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sda. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Mounting failed: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 152,111,103 152,109,056 83 Linux /dev/sda2 152,113,150 156,301,311 4,188,162 5 Extended /dev/sda5 152,113,152 156,301,311 4,188,160 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 0d8ed3c2-9ede-479f-9b32-2645f8b981bd ext4 /dev/sda5 e8f37d57-3ea2-4dfa-b9dc-4b32ad97a96e swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda2 00000000 9f f4 8e 04 d1 24 c8 ae e8 09 31 84 c4 49 30 b1 |.....$....1..I0.| 00000010 8a 10 1d 89 c3 90 0d 90 be a1 7a 38 8d 9f cd a6 |..........z8....| 00000020 aa 78 03 33 11 55 02 39 d3 8b 26 53 81 6f c0 79 |.x.3.U.9..&S.o.y| 00000030 c1 db f7 c4 c3 95 7a d4 59 00 5d 5f a6 b7 77 c8 |......z.Y.]_..w.| 00000040 07 3e 83 03 98 b2 4d 21 6d ea dd ed be c0 10 c1 |.>....M!m.......| 00000050 fb 77 25 37 98 a7 9f f3 92 88 17 a5 46 ca 0d 8b |.w%7........F...| 00000060 5e 24 f9 0c 5b 74 0c 3f c8 ad 08 cf ea 38 c7 3e |^$..[t.?.....8.>| 00000070 8c 33 ad 61 86 b4 ef 9b d1 74 78 33 9c 4c df 5f |.3.a.....tx3.L._| 00000080 8d ce cf ae a6 b7 a3 e1 cd 64 70 37 a6 e5 82 b9 |.........dp7....| 00000090 21 e2 94 f2 d9 4c 81 81 c6 ed 34 ba 9f 67 7f b1 |!....L....4..g..| 000000a0 39 29 25 f9 8e 15 35 d4 ca f2 0c d8 28 52 9e 87 |9)%...5.....(R..| 000000b0 df e4 4a 83 42 b7 87 61 4c 96 db e4 c6 53 ca af |..J.B..aL....S..| 000000c0 0d b2 8e 5e 2c 2a cb ca 48 b5 60 e0 b4 57 7c b3 |...^,*..H.`..W|.| 000000d0 4c 8c 1c 2f 21 8f 2d 98 20 90 19 c8 82 77 9c d7 |L../!.-. ....w..| 000000e0 f8 f9 e1 ec e3 60 4a b0 78 3e bc 1a 4e 7e 83 2e |.....`J.x>..N~..| 000000f0 ce de 5f 9f ed 62 f2 f9 0b f2 3d b9 93 1f 0e 81 |.._..b....=.....| 00000100 14 b4 1d 57 cc 18 42 5a 2e a9 0f 7e 39 61 5e 67 |...W..BZ...~9a^g| 00000110 11 53 ba 0a 0a fb 58 59 54 51 49 fc ce 90 7c 1d |.S....XYTQI...|.| 00000120 cf a4 1d b8 c1 bd 25 c5 5a 4e 68 02 32 c8 99 ac |......%.ZNh.2...| 00000130 33 08 f6 8e 6e 77 f9 57 3a 32 fe a5 47 0f 63 84 |3...nw.W:2..G.c.| 00000140 b9 dc ec c8 85 90 09 bd 13 bf 54 f0 07 0a 89 ec |..........T.....| 00000150 82 eb 35 be 19 05 8a 44 45 82 c7 2a c9 54 21 5d |..5....DE..*.T!]| 00000160 c9 80 12 4e e3 6c 8e 63 2c b6 35 93 d1 ea 27 f2 |...N.l.c,.5...'.| 00000170 85 27 30 ea 90 56 32 60 30 f0 5b 0a d0 89 64 01 |.'0..V2`0.[...d.| 00000180 a8 c3 ce 0b e4 69 45 66 e0 a3 85 e4 8c 1b 74 1c |.....iEf......t.| 00000190 a4 6d 3f 60 fe 60 0e e4 85 07 e2 d1 30 01 3d 10 |.m?`.`......0.=.| 000001a0 1c ce 4f df da d8 e9 62 bb 4b 85 38 7f 68 12 c6 |..O....b.K.8.h..| 000001b0 ed 53 9e 00 24 3a c7 c7 5b e7 6c 0a 4e b7 00 fe |.S..$:..[.l.N...| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 e8 3f 00 00 00 |............?...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-09-25__13h01 =================== boot-repair version : 3.193-0ppa15~natty boot-sav version : 3.193-0ppa29~natty glade2script-gtk2 version : 0.0.1-0ppa4~natty boot-sav-nonfree version : 3.18-0ppa20~natty boot-repair is executed in live-session (Ubuntu 11.04, natty, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so =================== os-prober: /dev/sda1:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="0d8ed3c2-9ede-479f-9b32-2645f8b981bd" TYPE="ext4" /dev/sda5: UUID="e8f37d57-3ea2-4dfa-b9dc-4b32ad97a96e" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== dmesg | grep EFI : This live-session is not EFI-compatible. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, 2048 sectors * 512 bytes =================== parted -l: Model: ATA WDC WD800JD-22MS (scsi) Disk /dev/sda: 80.0GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 77.9GB 77.9GB primary ext4 boot 2 77.9GB 80.0GB 2144MB extended 5 77.9GB 80.0GB 2144MB logical linux-swap(v1) Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label =================== parted -lm: BYT; /dev/sda:80.0GB:scsi:512:512:msdos:ATA WDC WD800JD-22MS; 1:1049kB:77.9GB:77.9GB:ext4::boot; 2:77.9GB:80.0GB:2144MB:::; 5:77.9GB:80.0GB:2144MB:linux-swap(v1)::; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label =================== mount: aufs on / type aufs (rw) none on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev/shm type tmpfs (rw,nosuid,nodev) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet input kmsg log lp0 mapper mcelog mem net network_latency network_throughput null oldmem parport0 pktcdvd port ppp psaux ptmx pts random rfkill rtc rtc0 scd0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb usbmon0 usbmon1 usbmon2 usbmon3 usbmon4 usbmon5 usbmon6 usbmon7 usbmon8 vga_arbiter zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on aufs aufs 1006M 124M 883M 13% / none devtmpfs 999M 676K 999M 1% /dev /dev/sr0 iso9660 686M 686M 0 100% /cdrom /dev/loop0 squashfs 658M 658M 0 100% /rofs none tmpfs 1006M 216K 1006M 1% /dev/shm tmpfs tmpfs 1006M 276K 1006M 1% /tmp none tmpfs 1006M 92K 1006M 1% /var/run none tmpfs 1006M 4.0K 1006M 1% /var/lock =================== fdisk -l: Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0005fa99 Device Boot Start End Blocks Id System /dev/sda1 * 1 9469 76054528 83 Linux /dev/sda2 9469 9730 2094081 5 Extended /dev/sda5 9469 9730 2094080 82 Linux swap / Solaris =================== Default settings Recommended-Repair This setting would restore the [(generic mbr)] MBR in sda, and make it boot on sda1. Additional repair would be performed: unhide-bootmenu-10s =================== Settings chosen by the user Custom-Repair This setting will restore the [(generic mbr)] MBR in sda, and make it boot on sda1. Additional repair will be performed: unhide-bootmenu-10s Will restore the MBR_TO_RESTORE : sda (generic mbr) into sda dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda 0+1 records in 0+1 records out parted /dev/sda set 1 boot on Information: You may need to update /etc/fstab. Boot successfully repaired. You can now reboot your computer. pastebinit packages needed User refused to install pastebinit

Κώδικας: Επιλογή όλων: sudo apt-get install -y boot-repair && boot-repair Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: boot-sav boot-sav-nonfree gawk glade2script-gtk2 Suggested packages: lvm2 mdadm mbr clean-ubiquity os-uninstaller libnotify Recommended packages: pastebinit The following NEW packages will be installed: boot-repair boot-sav boot-sav-nonfree gawk glade2script-gtk2 0 upgraded, 5 newly installed, 0 to remove and 356 not upgraded. Need to get 1,111 kB of archives. After this operation, 5,034 kB of additional disk space will be used. Get:1 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu/ natty/main boot-sav all 3.193-0ppa29~natty [306 kB] Get:2 http://archive.ubuntu.com/ubuntu/ natty/main gawk i386 1:3.1.7.dfsg-5 [530 kB] Get:3 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu/ natty/main glade2script-gtk2 all 0.0.1-0ppa4~natty [38.8 kB] Get:4 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu/ natty/main boot-repair all 3.193-0ppa15~natty [90.6 kB] Get:5 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu/ natty/main boot-sav-nonfree all 3.18-0ppa20~natty [146 kB] Fetched 1,111 kB in 9s (122 kB/s) Selecting previously deselected package gawk. (Reading database ... 136428 files and directories currently installed.) Unpacking gawk (from .../gawk_1%3a3.1.7.dfsg-5_i386.deb) ... Selecting previously deselected package boot-sav. Unpacking boot-sav (from .../boot-sav_3.193-0ppa29~natty_all.deb) ... Selecting previously deselected package glade2script-gtk2. Unpacking glade2script-gtk2 (from .../glade2script-gtk2_0.0.1-0ppa4~natty_all.deb) ... Selecting previously deselected package boot-repair. Unpacking boot-repair (from .../boot-repair_3.193-0ppa15~natty_all.deb) ... Selecting previously deselected package boot-sav-nonfree. Unpacking boot-sav-nonfree (from .../boot-sav-nonfree_3.18-0ppa20~natty_all.deb) ... Processing triggers for man-db ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for python-gmenu ... Rebuilding /usr/share/applications/desktop.en_US.utf8.cache... Processing triggers for hicolor-icon-theme ... Processing triggers for python-support ... Setting up gawk (1:3.1.7.dfsg-5) ... Setting up boot-sav (3.193-0ppa29~natty) ... Setting up glade2script-gtk2 (0.0.1-0ppa4~natty) ... Setting up boot-repair (3.193-0ppa15~natty) ... Setting up boot-sav-nonfree (3.18-0ppa20~natty) ... /usr/bin/glade2script-gtk2:2233: GtkWarning: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.N7KQLW': No such file or directory gtk.main() /usr/bin/glade2script-gtk2:2233: GtkWarning: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory gtk.main()

από **Tuxer** » 25 Σεπ 2012, 16:08

Learner έγραψε:Για να δεις αν "έσκασε" ο δίσκος , κάνε ένα boot από το LiveCD/Usb του Ubuntu (πάλι) και τρέξε τις παρακάτω εντολές
Κώδικας: Επιλογή όλων
sudo apt-get install smartmontools --no-install-recommends

Κώδικας: Επιλογή όλων
sudo smartctl -a /dev/sda

/dev/sda = Ο 80αρης , αν εκεί έχεις εγκατεστημένο το Ubuntu.

Κάνε ποστ τα αποτελέσματα εδώ . Ανάμεσα σε κώδικα

Επίσης από την υπογραφή σου (βλέπω πως την ανανέωσες) φαίνεται πως έχεις το Ubuntu 11.04 (natty) και όχι το 12.04 .

Κώδικας: Επιλογή όλων: ubuntu@ubuntu:~$ sudo apt-get install smartmontools --no-install-recommends Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: gsmartcontrol smart-notifier Recommended packages: mailx mailutils The following NEW packages will be installed: smartmontools 0 upgraded, 1 newly installed, 0 to remove and 356 not upgraded. Need to get 389 kB of archives. After this operation, 1,077 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ natty/main smartmontools i386 5.39.1+svn3124-2 [389 kB] Fetched 389 kB in 2s (145 kB/s) Selecting previously deselected package smartmontools. (Reading database ... 136654 files and directories currently installed.) Unpacking smartmontools (from .../smartmontools_5.39.1+svn3124-2_i386.deb) ... Processing triggers for ureadahead ... Processing triggers for man-db ... Setting up smartmontools (5.39.1+svn3124-2) ...

Κώδικας: Επιλογή όλων: ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Serial ATA family Device Model: WDC WD800JD-22MSA1 Serial Number: WD-WMAM9DLZ8017 Firmware Version: 10.01E01 User Capacity: 80,026,361,856 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Sep 25 13:07:47 2012 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (2460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 33) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 36 3 Spin_Up_Time 0x0003 176 164 021 Pre-fail Always - 2183 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2160 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 17027 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2116 190 Airflow_Temperature_Cel 0x0022 060 043 045 Old_age Always In_the_past 40 194 Temperature_Celsius 0x0022 103 086 000 Old_age Always - 40 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 3 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 2 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 3 SMART Error Log Version: 1 ATA Error Count: 108 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 108 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5e 7f 87 40 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 50 7f 87 04 08 00:18:13.786 READ FPDMA QUEUED ef 10 02 00 00 00 00 00 00:18:13.786 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 00:18:13.786 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00:18:13.786 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:18:13.786 SET FEATURES [Set transfer mode] Error 107 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5e 7f 87 40 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 50 7f 87 04 08 00:18:11.835 READ FPDMA QUEUED ef 10 02 00 00 00 00 00 00:18:11.835 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 00:18:11.835 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00:18:11.835 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:18:11.835 SET FEATURES [Set transfer mode] Error 106 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5e 7f 87 40 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 50 7f 87 04 08 00:18:09.890 READ FPDMA QUEUED ef 10 02 00 00 00 00 00 00:18:09.890 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 00:18:09.890 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00:18:09.890 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:18:09.889 SET FEATURES [Set transfer mode] Error 105 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5e 7f 87 40 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 50 7f 87 04 08 00:18:07.885 READ FPDMA QUEUED ef 10 02 00 00 00 00 00 00:18:07.885 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 00:18:07.885 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00:18:07.885 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:18:07.885 SET FEATURES [Set transfer mode] Error 104 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5e 7f 87 40 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 50 7f 87 04 08 00:18:05.978 READ FPDMA QUEUED ef 10 02 00 00 00 00 00 00:18:05.978 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 00 00 00:18:05.978 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00:18:05.978 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:18:05.978 SET FEATURES [Set transfer mode] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 16722 - # 2 Short offline Completed without error 00% 16722 - # 3 Short offline Completed without error 00% 15751 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

από **Tuxer** » 25 Σεπ 2012, 16:14

τουλαχιστον να παρω Αν μπορω τα αρχεια γιατι Δεν τα βλεπω και μετα αν ειναι ξανα κανω εγκατασταση καθαρη..

από **eliasps** » 25 Σεπ 2012, 16:16

Tuxer έγραψε:τουλαχιστον να παρω Αν μπορω τα αρχεια γιατι Δεν τα βλεπω και μετα αν ειναι ξανα κανω εγκατασταση καθαρη..

Kάνε mount τον δίσκο με τα αρχεία σου και αποθήκευσέ τα κάπου εξωτερικά, η στον σκληρό των Windows, πάλι χρησιμοποιώντας το LiveCD.

από **Learner** » 25 Σεπ 2012, 16:17

Tuxer έγραψε:
Κώδικας: Επιλογή όλων
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 36

Ο δίσκος φαίνεται να έχει κάποια λαθάκια , ωστόσο δεν τον βλέπω για "σκασμένο" .

Προσπάθησε να διορθώσεις κάποια bad superblocks , με αυτή την εντολή (από LiveCD).

Κώδικας: Επιλογή όλων: sudo e2fsck -fpv /dev/sda1

Μόλις τελειώσει η παραπάνω εντολή , κάνε επανεκκίνηση να δεις. (χωρίς το CD)

Learner έγραψε:Επίσης από την υπογραφή σου (βλέπω πως την ανανέωσες) φαίνεται πως έχεις το Ubuntu 11.04 (natty) και όχι το 12.04 .

Τελικά την 12.04 έχεις. Το script υπογραφής το τρέχουμε από το εγκατεστημένο λειτουργικό σύστημα. Όχι από το LiveCD (της 11.04 στην δική σου περίπτωση)

από **simosx** » 25 Σεπ 2012, 16:24

Tuxer έγραψε: 9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 17027

Ο δίσκος είναι σε λειτουργία 17027 ώρες, ή 710 "συνεχόμενες" ημέρες περίπου.

Υπήρξε ζήτημα

Tuxer έγραψε:

Error 108 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5e 7f 87 40

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 50 7f 87 04 08 00:18:13.786 READ FPDMA QUEUED
ef 10 02 00 00 00 00 00 00:18:13.786 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 00 00 00:18:13.786 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 00 00:18:13.786 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 00:18:13.786 SET FEATURES [Set transfer mode]

τώρα τελευταία, μάλλον την τελευταία φορά που χρησιμοποιήθηκε. Εδώ το σφάλμα 108 πρέπει να σημαίνει κάτι.

Τώρα με αναζήτηση στο διαδίκτυο για: smartmontools "Error 108" (όπως το γράφω)
εμφανίζει μια σειρά από σχετικές σελίδες όπου συνδυάζεται με κάποιο άλλο πρόβλημα.

Tuxer έγραψε: 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0

Εδώ είναι 0 οπότε δεν έχεις κατεστραμμένους τομείς.

Tuxer έγραψε:
190 Airflow_Temperature_Cel 0x0022 060 043 045 Old_age Always In_the_past 40
194 Temperature_Celsius 0x0022 103 086 000 Old_age Always - 40

Εδώ λέει για τρομερές θερμοκρασίες. Κάποια στιγμή ο δίσκος χτύπησε μεγάλη θερμοκρασία (103C;).
Αν δε δει κάποιος άλλο κάτι άλλο, θα έλεγα ότι κάτι συμβαίνει με τη θερμοκρασία και ειδικές καταστάσεις όπου αυξάνουν τη θερμοκρασία υπερβολικά πολύ (κάτι που καταστρέφει τα δεδομένα).

από **Tuxer** » 25 Σεπ 2012, 16:25

Κώδικας: Επιλογή όλων: sudo e2fsck -fpv /dev/sda1 /dev/sda1: recovering journal Error reading block 9498347 (Attempt to read block from filesystem resulted in short read). /dev/sda1: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options)

εδω τι να κανω τωρα??

από **Learner** » 25 Σεπ 2012, 16:29

Tuxer έγραψε:εδω τι να κανω τωρα??

Κώδικας: Επιλογή όλων: sudo fsck -V /dev/sda1

Πρόβλημα με Ubuntu 12.04 - Initramfs

Re: Πρόβλημα με Ubuntu 12.04 LTS - Initramfs

Re: Πρόβλημα με Ubuntu 12.04 LTS - Initramfs

Re: Πρόβλημα με Ubuntu 12.04 LTS - Initramfs

Re: Πρόβλημα με Ubuntu 12.04 LTS - Initramfs

Re: Πρόβλημα με Ubuntu 12.04 LTS - Initramfs

Re: Πρόβλημα με Ubuntu 11.04 - Initramfs

Re: Πρόβλημα με Ubuntu 12.04 LTS - Initramfs

Re: Πρόβλημα με Ubuntu 11.04 - Initramfs

Re: Πρόβλημα με Ubuntu 11.04 - Initramfs

Re: Πρόβλημα με Ubuntu 12.04 - Initramfs