Το 11.10 κολλάει στο "checking battery state"

[zirico]

Καλησπέρα σε όλους.Κάποια στιγμή μετά από κάποιο update στο 11.10 δεν λειτουργούσε ο ήχος και ψαχουλεύοντας στο internet μέσω τερματικού έκανα κάποια πακέτα install για το pulse audio,ακριβώς δεν ξέρω τι έκανα γιατί τα έκανα όλα βιαστικά χωρίς να κοιτάω (λάθος μου το ξέρω δεν θα το ξανακάνω) μετά μπήκα και στο forum εδώ και ακολούθησα αυτόν τον οδηγό.Το θέμα όμως τώρα είναι ότι το ubuntu δεν bootarei ποια φτάνει δηλαδή μέχρι το σημείο που λέει Checking battery state και δεν πάει παρακάτω,επίσης πολύ μεγάλη εντύπωση μου έκανε ότι έμενε πολύ ώρα στο σημείο που έλεγε PulseAudio configured for pre-user session αλλα προχωράει βγάζοντας [OK] στα δεξιά.καμια ιδέα πως να μπω από live cd να δω τις τελευταίες εντολές που είχα δώσει και να τις αναιρέσω?

[pisons]

Πήγαινε στον φάκελο /home και εμφάνισε τα κρυφά αρχεία
Μόλις εμφανιστούν τα κρυφά σου αρχεία βρες αυτό με τ’ όνομα: .bash.history
Διπλό κλικ επανω του ή δεξί κλικ>Άνοιγμα με κειμενογράφο η επεξεργαστή κειμένου και θα σου ανοίξει μια λίστα με τις εντολές που έχεις χρησιμοποιήσει στο σύστημα σου με πρώτη τη παλιότερη

[zirico]

Κώδικας: Επιλογή όλων

sudo rmmod droidcam_v4l
sudo rm -f /usr/bin/droidcam
sudo rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/droidcam_v4l.ko
sudo gedit /etc/modules
alsa-info.sh
sudo alsa-info.sh
wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh
bash alsa-info.sh
sudo cp /etc/modprobe.d/alsa-base.conf /etc/modprobe.d/alsa-base.conf.ORIGINAL
sudo gedit /etc/modprobe.d/alsa-base.conf


Το αρχείο το βρήκα αλλα δεν βοηθάει και πολύ μιας και σίγουρα κάτι λείπει. γιατί αφότου έκανα remove το droidcamx έβαλα πρώτα την άλλη εντολή και μετά πέρασα το alsa.info.
Έψαξα στο internet και μάλλον η εντολή που είχα δώσει πριν κάνω install το alsa.info ήταν αυτή :

Κώδικας: Επιλογή όλων

sudo apt-get update;sudo apt-get dist-upgrade; sudo apt-get install linux-sound-base alsa-base alsa-utils gdm ubuntu-desktop linux-image-`uname -r` libasound2; sudo apt-get -y --reinstall install linux-sound-base alsa-base alsa-utils gdm ubuntu-desktop linux-image-`uname -r` libasound2; killall pulseaudio; rm -r ~/.pulse*; sudo usermod -aG `cat /etc/group | grep -e '^pulse:' -e '^audio:' -e '^pulse-access:' -e '^pulse-rt:' -e '^video:' | awk -F: '{print $1}' | tr '\n' ',' | sed 's:,$::g'` `whoami`

[pisons]

κανε εκκίνηση και πάτα shift (κρατάς πατημένο μέχρι να ανοίξει το μενού) για να μπεις απο το ricovery mode...
αν ανοίξει δοκίμασε να μπεις από τη λειτουργία αποκατάστασις

[zirico]

Λοιπόν,είχα πάρει τελείως λάθος δρόμο μου φαίνεται το πρόβλημα δεν πρέπει να σχετίζεται με την κάρτα ήχου γιατί όταν κολλάει h εκκίνηση στο "checking battery setting" μπαίνω με alt+ctr+f1 σε κονσόλα και δίνω

Κώδικας: Επιλογή όλων

sudo /etc/init.d/lighttdm restart

και με βάζει να κάνω login και μπαίνω κανονικά και ήχο έχω κανονικά.επίσης παρατήρησα καλλίτερα στην εκκίνηση δεν κολλάει στο pulse audio αλλα λίγο πιο πριν που λέει

Κώδικας: Επιλογή όλων

mountall: Disconnected from Plymouth

και εκεί μένει για παρα πολύ ώρα πριν προχωρήσει λίγο παρακάτω και κολλήσει ξανά.μήπως με τα νέα δεδομένα είναι πιο εύκολο να με βοηθήσετε;

[the_eye]

Αφού μπεις στο περιβάλλον δώσε σε τερματικό

Κώδικας: Επιλογή όλων

dmesg

και δώσε μας το αποτέλεσμα.

[zirico]

Κώδικας: Επιλογή όλων

[ 0.493217] system 00:0a: [io 0x0300-0x030f] has been reserved
[ 0.493219] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.493221] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.493240] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.493274] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.493276] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.493336] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.493337] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.493339] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.493340] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[ 0.493341] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.493380] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.493382] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.493384] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.493386] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.493388] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.493390] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.493452] pnp: PnP ACPI: found 13 devices
[ 0.493453] ACPI: ACPI bus type pnp unregistered
[ 0.493455] PnPBIOS: Disabled by ACPI PNP
[ 0.528841] PCI: max bus depth: 1 pci_try_num: 2
[ 0.528863] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.528865] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.528868] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.528870] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.528874] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.528875] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.528878] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.528880] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 0.528883] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.528884] pci 0000:00:0a.0: bridge window [io disabled]
[ 0.528886] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.528888] pci 0000:00:0a.0: bridge window [mem pref disabled]
[ 0.528891] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.528892] pci 0000:00:14.4: bridge window [io disabled]
[ 0.528896] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.528899] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.528903] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.528905] pci 0000:00:15.0: bridge window [io disabled]
[ 0.528908] pci 0000:00:15.0: bridge window [mem disabled]
[ 0.528910] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.528914] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.528916] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.528919] pci 0000:00:15.1: bridge window [mem disabled]
[ 0.528922] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.528936] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.528938] pci 0000:00:09.0: setting latency timer to 64
[ 0.528944] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.528946] pci 0000:00:0a.0: setting latency timer to 64
[ 0.528955] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.528958] pci 0000:00:15.0: setting latency timer to 64
[ 0.528962] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.528965] pci 0000:00:15.1: setting latency timer to 64
[ 0.528967] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.528969] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.528971] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.528973] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.528974] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.528976] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.528978] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.528979] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.528981] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.528983] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.528985] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.528986] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.528988] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.528990] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.528991] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.528993] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.528995] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.528996] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.528998] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.529000] pci_bus 0000:06: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.529025] NET: Registered protocol family 2
[ 0.529065] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.529192] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.529513] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.529676] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.529677] TCP reno registered
[ 0.529679] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.529685] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.529752] NET: Registered protocol family 1
[ 0.529760] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.364091] pci 0000:01:05.0: Boot video device
[ 1.368387] PCI: CLS 64 bytes, default 64
[ 1.368602] audit: initializing netlink socket (disabled)
[ 1.368609] type=2000 audit(1328461420.364:1): initialized
[ 1.386866] highmem bounce pool size: 64 pages
[ 1.386870] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.397183] VFS: Disk quotas dquot_6.5.2
[ 1.397233] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.397722] fuse init (API version 7.16)
[ 1.397806] msgmni has been set to 1653
[ 1.398208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.398237] io scheduler noop registered
[ 1.398239] io scheduler deadline registered
[ 1.398262] io scheduler cfq registered (default)
[ 1.398356] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.398380] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 1.398420] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.398438] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.398474] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.398506] pcieport 0000:00:15.0: irq 42 for MSI/MSI-X
[ 1.398549] pcieport 0000:00:15.1: setting latency timer to 64
[ 1.398581] pcieport 0000:00:15.1: irq 43 for MSI/MSI-X
[ 1.398635] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 1.398637] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.398638] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 1.398640] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 1.398649] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.398650] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.398652] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.398664] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.398667] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.398679] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.398680] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 1.398683] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.398694] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.398709] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.398791] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.398794] ACPI: Power Button [PWRB]
[ 1.398821] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.398823] ACPI: Power Button [PWRF]
[ 1.398839] ACPI: acpi_idle registered with cpuidle
[ 1.398880] ACPI: processor limited to max C-state 1
[ 1.436701] ERST: Table is not found!
[ 1.436762] isapnp: Scanning for PnP cards...
[ 1.436786] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.457133] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.790144] isapnp: No Plug & Play device found
[ 1.832623] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.832904] Linux agpgart interface v0.103
[ 1.833786] brd: module loaded
[ 1.834116] loop: module loaded
[ 1.834242] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.834261] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.834277] pata_acpi 0000:02:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.834291] pata_acpi 0000:02:00.1: setting latency timer to 64
[ 1.834300] pata_acpi 0000:02:00.1: PCI INT A disabled
[ 1.834486] Fixed MDIO Bus: probed
[ 1.834500] PPP generic driver version 2.4.2
[ 1.834520] tun: Universal TUN/TAP device driver, 1.6
[ 1.834521] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.834570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.834578] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.834587] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.834608] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.834614] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.834624] QUIRK: Enable AMD PLL fix
[ 1.834632] ehci_hcd 0000:00:12.2: debug port 1
[ 1.834649] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
[ 1.844055] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.844161] hub 1-0:1.0: USB hub found
[ 1.844164] hub 1-0:1.0: 5 ports detected
[ 1.844218] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.844233] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.844255] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.844261] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.844276] ehci_hcd 0000:00:13.2: debug port 1
[ 1.844287] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe7ff400
[ 1.856069] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.856173] hub 2-0:1.0: USB hub found
[ 1.856176] hub 2-0:1.0: 5 ports detected
[ 1.856233] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.856247] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.856269] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.856275] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.856290] ehci_hcd 0000:00:16.2: debug port 1
[ 1.856301] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe7ff000
[ 1.868055] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.868172] hub 3-0:1.0: USB hub found
[ 1.868174] hub 3-0:1.0: 4 ports detected
[ 1.868230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.868245] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.868259] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.868282] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.868302] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe7fe000
[ 1.928154] hub 4-0:1.0: USB hub found
[ 1.928159] hub 4-0:1.0: 5 ports detected
[ 1.928213] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.928227] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.928251] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.928265] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fd000
[ 1.988172] hub 5-0:1.0: USB hub found
[ 1.988178] hub 5-0:1.0: 5 ports detected
[ 1.988234] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.988248] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.988271] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.988285] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fc000
[ 2.048152] hub 6-0:1.0: USB hub found
[ 2.048157] hub 6-0:1.0: 2 ports detected
[ 2.048209] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.048223] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.048245] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.048259] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe7f7000
[ 2.108158] hub 7-0:1.0: USB hub found
[ 2.108163] hub 7-0:1.0: 4 ports detected
[ 2.108216] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.108274] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.108607] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.108611] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.108676] mousedev: PS/2 mouse device common for all mice
[ 2.108745] rtc_cmos 00:03: RTC can wake from S4
[ 2.108807] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.108825] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.108873] device-mapper: uevent: version 1.0.3
[ 2.108917] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.108935] EISA: Probing bus 0 at eisa.0
[ 2.108936] EISA: Cannot allocate resource for mainboard
[ 2.108938] Cannot allocate resource for EISA slot 1
[ 2.108939] Cannot allocate resource for EISA slot 2
[ 2.108940] Cannot allocate resource for EISA slot 3
[ 2.108941] Cannot allocate resource for EISA slot 4
[ 2.108942] Cannot allocate resource for EISA slot 5
[ 2.108944] Cannot allocate resource for EISA slot 6
[ 2.108945] Cannot allocate resource for EISA slot 7
[ 2.108946] Cannot allocate resource for EISA slot 8
[ 2.108947] EISA: Detected 0 cards.
[ 2.108954] cpufreq-nforce2: No nForce2 chipset.
[ 2.108955] cpuidle: using governor ladder
[ 2.108956] cpuidle: using governor menu
[ 2.108958] EFI Variables Facility v0.08 2004-May-17
[ 2.109120] TCP cubic registered
[ 2.109206] NET: Registered protocol family 10
[ 2.109554] NET: Registered protocol family 17
[ 2.109563] Registering the dns_resolver key type
[ 2.109580] Using IPI No-Shortcut mode
[ 2.109623] PM: Hibernation image not present or could not be loaded.
[ 2.109630] registered taskstats version 1
[ 2.118277] Magic number: 0:665:86
[ 2.118358] rtc_cmos 00:03: setting system clock to 2012-02-05 17:03:42 UTC (1328461422)
[ 2.118364] powernow-k8: Found 1 AMD Athlon(tm) II X2 265 Processor (2 cpu cores) (version 2.20.00)
[ 2.118389] powernow-k8: 0 : pstate 0 (3300 MHz)
[ 2.118390] powernow-k8: 1 : pstate 1 (2600 MHz)
[ 2.118392] powernow-k8: 2 : pstate 2 (1900 MHz)
[ 2.118393] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.118674] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.118675] EDD information not available.
[ 2.118772] Freeing unused kernel memory: 720k freed
[ 2.118954] Write protecting the kernel text: 5524k
[ 2.119001] Write protecting the kernel read-only data: 2240k
[ 2.119002] NX-protecting the kernel data: 4716k
[ 2.134506] udevd[80]: starting version 173
[ 2.176829] scsi0 : pata_atiixp
[ 2.179496] scsi1 : pata_atiixp
[ 2.179920] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.179922] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.195041] pata_via 0000:02:00.1: version 0.3.4
[ 2.195057] pata_via 0000:02:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.195100] pata_via 0000:02:00.1: setting latency timer to 64
[ 2.196720] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.196736] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 2.196739] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.196788] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[ 2.196901] xhci_hcd 0000:03:00.0: irq 18, io mem 0xfebfa000
[ 2.196936] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 2.196941] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2.196944] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 2.197045] xHCI xhci_add_endpoint called for root hub
[ 2.197047] xHCI xhci_check_bandwidth called for root hub
[ 2.197067] hub 8-0:1.0: USB hub found
[ 2.197072] hub 8-0:1.0: 2 ports detected
[ 2.197111] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.197130] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[ 2.201019] scsi2 : pata_via
[ 2.201568] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.201586] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.201617] r8169 0000:06:00.0: setting latency timer to 64
[ 2.201667] r8169 0000:06:00.0: irq 47 for MSI/MSI-X
[ 2.201971] r8169 0000:06:00.0: eth0: RTL8168e/8111e at 0xf8418000, bc:ae:c5:8e:94:e3, XID 0c200000 IRQ 47
[ 2.202728] xHCI xhci_add_endpoint called for root hub
[ 2.202730] xHCI xhci_check_bandwidth called for root hub
[ 2.202749] hub 9-0:1.0: USB hub found
[ 2.202758] hub 9-0:1.0: 2 ports detected
[ 2.203069] scsi3 : pata_via
[ 2.203186] ata3: PATA max UDMA/133 cmd 0xdc00 ctl 0xd480 bmdma 0xd000 irq 17
[ 2.203189] ata4: PATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 17
[ 2.358238] ata1.01: ATA-8: ST3500413AS, JC4B, max UDMA/133
[ 2.358242] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.358246] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 2.368098] Refined TSC clocksource calibration: 3314.776 MHz.
[ 2.368103] Switching to clocksource tsc
[ 2.368618] ata3.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 2.372570] ata1.01: configured for UDMA/33
[ 2.372731] scsi 0:0:1:0: Direct-Access ATA ST3500413AS JC4B PQ: 0 ANSI: 5
[ 2.372862] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 2.372947] sd 0:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.373011] sd 0:0:1:0: [sda] Write Protect is off
[ 2.373013] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.373035] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.384623] ata3.00: configured for UDMA/33
[ 2.386950] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 2.388861] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.388864] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.388970] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.389028] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.413458] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.413725] sd 0:0:1:0: [sda] Attached SCSI disk
[ 2.444075] usb 7-2: new low speed USB device number 2 using ohci_hcd
[ 2.544518] ahci 0000:00:11.0: version 3.0
[ 2.544535] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.544617] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.544619] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.547489] scsi4 : ahci
[ 2.547596] scsi5 : ahci
[ 2.547897] scsi6 : ahci
[ 2.549215] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.549223] firewire_ohci 0000:02:00.0: setting latency timer to 64
[ 2.549363] scsi7 : ahci
[ 2.549451] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 19
[ 2.549454] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 19
[ 2.549456] ata7: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 19
[ 2.549459] ata8: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 19
[ 2.612107] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 2.630278] input: Microsft Microsoft Wireless Optical Desktop® 2.20 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.0/input/input2
[ 2.630345] generic-usb 0003:045E:00E3.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Optical Desktop® 2.20] on usb-0000:00:16.0-2/input0
[ 2.660213] input: Microsft Microsoft Wireless Optical Desktop® 2.20 as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.1/input/input3
[ 2.660293] generic-usb 0003:045E:00E3.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Optical Desktop® 2.20] on usb-0000:00:16.0-2/input1
[ 2.660305] usbcore: registered new interface driver usbhid
[ 2.660306] usbhid: USB HID core driver
[ 2.868075] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.868105] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.868131] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.868160] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.112126] firewire_core: created device fw0: GUID 001e8c00002fcc6c, S400
[ 7.983557] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 24.347025] udevd[394]: starting version 173
[ 24.384312] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.391247] lp: driver loaded but no devices found
[ 24.405759] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 24.405944] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 24.405990] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 24.438426] [drm] Initialized drm 1.1.0 20060810
[ 24.457708] wmi: Mapper loaded
[ 24.520150] [drm] radeon defaulting to kernel modesetting.
[ 24.520153] [drm] radeon kernel modesetting enabled.
[ 24.520211] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 24.520214] radeon 0000:01:05.0: setting latency timer to 64
[ 24.520332] [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E).
[ 24.520349] [drm] register mmio base: 0xFE9F0000
[ 24.520351] [drm] register mmio size: 65536
[ 24.521431] ATOM BIOS: 113
[ 24.521448] radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used)
[ 24.521451] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 24.521659] [drm] Detected VRAM RAM=368M, BAR=256M
[ 24.521662] [drm] RAM width 32bits DDR
[ 24.538683] [TTM] Zone kernel: Available graphics memory: 423654 kiB.
[ 24.538686] [TTM] Zone highmem: Available graphics memory: 1932810 kiB.
[ 24.538688] [TTM] Initializing pool allocator.
[ 24.538704] [drm] radeon: 368M of VRAM memory ready
[ 24.538705] [drm] radeon: 512M of GTT memory ready.
[ 24.538717] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 24.538719] [drm] Driver supports precise vblank timestamp query.
[ 24.538734] [drm] radeon: irq initialized.
[ 24.538737] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 24.561365] [drm] Loading RS780 Microcode
[ 24.573046] type=1400 audit(1328457844.951:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=747 comm="apparmor_parser"
[ 24.573157] type=1400 audit(1328457844.951:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=796 comm="apparmor_parser"
[ 24.573371] type=1400 audit(1328457844.951:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=747 comm="apparmor_parser"
[ 24.573459] type=1400 audit(1328457844.951:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=796 comm="apparmor_parser"
[ 24.573577] type=1400 audit(1328457844.951:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=747 comm="apparmor_parser"
[ 24.573686] type=1400 audit(1328457844.951:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=796 comm="apparmor_parser"
[ 24.638983] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.665124] radeon 0000:01:05.0: WB enabled
[ 24.683466] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 24.697049] [drm] ring test succeeded in 1 usecs
[ 24.697174] [drm] radeon: ib pool ready.
[ 24.697232] [drm] ib test succeeded in 0 usecs
[ 24.697414] [drm] Radeon Display Connectors
[ 24.697415] [drm] Connector 0:
[ 24.697416] [drm] VGA
[ 24.697417] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 24.697419] [drm] Encoders:
[ 24.697420] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 24.697421] [drm] Connector 1:
[ 24.697422] [drm] DVI-D
[ 24.697422] [drm] HPD1
[ 24.697424] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 24.697425] [drm] Encoders:
[ 24.697426] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 24.750409] [drm] Radeon display connector VGA-1: Found valid EDID
[ 24.760095] [drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID
[ 24.760121] [drm] radeon: power management initialized
[ 24.830226] [drm] fb mappable at 0xD0141000
[ 24.830227] [drm] vram apper at 0xD0000000
[ 24.830228] [drm] size 5787648
[ 24.830229] [drm] fb depth is 24
[ 24.830230] [drm] pitch is 6400
[ 24.830289] fbcon: radeondrmfb (fb0) is primary device
[ 24.830778] Console: switching to colour frame buffer device 200x56
[ 24.830806] fb0: radeondrmfb frame buffer device
[ 24.830807] drm: registered panic notifier
[ 24.830811] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:05.0 on minor 0
[ 24.830841] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 24.830864] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 24.916151] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,user_xattr
[ 25.397573] ppdev: user-space parallel port driver
[ 25.404773] type=1400 audit(1328457845.783:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1050 comm="apparmor_parser"
[ 25.405111] type=1400 audit(1328457845.783:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1050 comm="apparmor_parser"
[ 25.454984] type=1400 audit(1328457845.831:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1065 comm="apparmor_parser"
[ 25.459200] type=1400 audit(1328457845.835:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1064 comm="apparmor_parser"
[ 25.587543] r8169 0000:06:00.0: eth0: link down
[ 25.587551] r8169 0000:06:00.0: eth0: link down
[ 25.587714] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.622530] init: failsafe main process (987) killed by TERM signal
[ 25.624111] init: apport pre-start process (1114) terminated with status 1
[ 25.655944] init: apport post-stop process (1161) terminated with status 1
[ 25.659970] init: lightdm main process (1122) killed by TERM signal
[ 25.707280] vboxdrv: Found 2 processor cores.
[ 25.707756] vboxdrv: fAsync=0 offMin=0x5f3 offMax=0x1212
[ 25.708331] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 25.708334] vboxdrv: Successfully loaded version 4.1.0 (interface 0x00190000).
[ 25.890801] radeon 0000:01:05.0: texture bo too small (1600 900 26 0 -> 5785600 have 5763072)
[ 25.890805] radeon 0000:01:05.0: alignments 1600 64 8 256
[ 25.890807] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 25.914982] vboxpci: IOMMU not found (not registered)
[ 27.162918] r8169 0000:06:00.0: eth0: link up
[ 27.163073] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 38.028033] eth0: no IPv6 routers present
[ 88.126652] Bluetooth: Core ver 2.16
[ 88.126668] NET: Registered protocol family 31
[ 88.126669] Bluetooth: HCI device and connection manager initialized
[ 88.126671] Bluetooth: HCI socket layer initialized
[ 88.126673] Bluetooth: L2CAP socket layer initialized
[ 88.126698] Bluetooth: SCO socket layer initialized
[ 88.128850] Bluetooth: RFCOMM TTY layer initialized
[ 88.128857] Bluetooth: RFCOMM socket layer initialized
[ 88.128859] Bluetooth: RFCOMM ver 1.11
[ 88.130036] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 88.130038] Bluetooth: BNEP filters: protocol multicast
[ 88.632131] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 88.742346] init: plymouth-stop pre-start process (1609) terminated with status 1
[ 93.356479] show_signal_msg: 40 callbacks suppressed
[ 93.356483] gdm-simple-slav[1252]: segfault at 0 ip b774c80e sp bfba5310 error 4 in libnss_compat-2.13.so[b7749000+8000]
[ 103.445974] init: tty1 main process (1610) terminated with status 1
[ 103.445998] init: tty1 main process ended, respawning
[ 122.050184] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 2684.936115] usb 3-1: new high speed USB device number 3 using ehci_hcd
[ 2685.455928] usbcore: registered new interface driver uas
[ 2685.480523] Initializing USB Mass Storage driver...
[ 2685.480825] scsi8 : usb-storage 3-1:1.0
[ 2685.481053] usbcore: registered new interface driver usb-storage
[ 2685.481058] USB Mass Storage support registered.
[ 2686.481250] scsi 8:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 2686.504694] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 2687.599621] sd 8:0:0:0: [sdb] 4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
[ 2687.600317] sd 8:0:0:0: [sdb] Write Protect is off
[ 2687.600329] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2687.600975] sd 8:0:0:0: [sdb] No Caching mode page present
[ 2687.600987] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2687.606097] sd 8:0:0:0: [sdb] No Caching mode page present
[ 2687.606108] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2687.607115] sdb: sdb1
[ 2687.612183] sd 8:0:0:0: [sdb] No Caching mode page present
[ 2687.612194] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2687.612202] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 3058.970203] usb 3-1: USB disconnect, device number 3
[ 3184.180106] usb 3-1: new high speed USB device number 4 using ehci_hcd
[ 3184.318616] scsi9 : usb-storage 3-1:1.0
[ 3185.317268] scsi 9:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 3185.344953] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 3185.588483] sd 9:0:0:0: [sdb] 4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
[ 3185.589090] sd 9:0:0:0: [sdb] Write Protect is off
[ 3185.589102] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3185.589715] sd 9:0:0:0: [sdb] No Caching mode page present
[ 3185.589726] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 3185.594087] sd 9:0:0:0: [sdb] No Caching mode page present
[ 3185.594097] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 3185.595108] sdb: sdb1
[ 3185.600262] sd 9:0:0:0: [sdb] No Caching mode page present
[ 3185.600272] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 3185.600279] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 3208.218835] sd 9:0:0:0: [sdb] No Caching mode page present
[ 3208.218839] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 3208.222989] sdb:
[ 3236.161015] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3236.189683] ISO 9660 Extensions: RRIP_1991A
[ 4222.833173] usb 3-1: USB disconnect, device number 4
[ 4222.840136] sd 9:0:0:0: [sdb] Unhandled error code
[ 4222.840141] sd 9:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 4222.840146] sd 9:0:0:0: [sdb] CDB: Write(10): 2a 00 00 33 b9 3e 00 00 f0 00
[ 4222.840156] end_request: I/O error, dev sdb, sector 3389758
[ 4222.841793] sd 9:0:0:0: [sdb] Unhandled error code
[ 4222.841796] sd 9:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 4222.841800] sd 9:0:0:0: [sdb] CDB: Write(10): 2a 00 00 33 ba 2e 00 00 f0 00
[ 4222.841808] end_request: I/O error, dev sdb, sector 3389998
[ 4222.924126] FAT-fs (sdb1): FAT read failed (blocknr 3442)
[ 4222.946531] FAT-fs (sdb1): FAT read failed (blocknr 3274)
[ 4222.946564] FAT-fs (sdb1): FAT read failed (blocknr 3442)
[ 4222.967071] FAT-fs (sdb1): FAT read failed (blocknr 3274)
[ 4223.076187] FAT-fs (sdb1): unable to read inode block for updating (i_pos 126219)
[ 4226.452078] usb 3-1: new high speed USB device number 5 using ehci_hcd
[ 4226.588148] scsi10 : usb-storage 3-1:1.0
[ 4227.589027] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 4227.616798] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 4228.684659] sd 10:0:0:0: [sdb] 4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
[ 4228.685228] sd 10:0:0:0: [sdb] Write Protect is off
[ 4228.685238] sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4228.685857] sd 10:0:0:0: [sdb] No Caching mode page present
[ 4228.685868] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 4228.689705] sd 10:0:0:0: [sdb] No Caching mode page present
[ 4228.689716] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 4228.690769] sdb: sdb1
[ 4228.694112] sd 10:0:0:0: [sdb] No Caching mode page present
[ 4228.694123] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 4228.694130] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 4295.856196] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4295.856297] ISO 9660 Extensions: RRIP_1991A
[ 5129.397289] usb 3-1: USB disconnect, device number 5
zirico@Desktop:~$


[the_eye]

Δώσε και

Κώδικας: Επιλογή όλων

sudo fdisk -l

[zirico]

Κώδικας: Επιλογή όλων

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7e2a218c

Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 163842047 81817600 7 HPFS/NTFS/exFAT
/dev/sda3 163842048 388880383 112519168 83 Linux
/dev/sda4 388880384 976773119 293946368 5 Extended
/dev/sda5 388882432 390932479 1025024 82 Linux swap / Solaris
/dev/sda6 390934528 976773119 292919296 7 HPFS/NTFS/exFAT


[modenas88]

@zirico
Αν έχεις περάσει τους ιδιοταγείς (κλειστούς) οδηγούς για την κάρτα γραφικών σου, τότε δοκίμασε να τους επανεγκαταστήσεις,
Είχα κι εγώ το ίδιο πρόβλημα με σένα σε έναν φορητό με NVIDIA και λύθηκε τον παραπάνω τρόπο. Σε Ubuntu 64-bit 11.10.